[PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC

[PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC

[Erin Lo]

MT8183 is a SoC based on 64bit ARMv8 architecture.
It contains 4 CA53 and 4 CA73 cores.
MT8183 share many HW IP with MT65xx series.
This patchset was tested on MT8183 evaluation board, and boot to shell ok.

This series contains document bindings, device tree including interrupt, uart.

Change in v3:
1. Fill out GICC, GICH, GICV regions
2. Update Copyright to 2018

Change in v2:
1. Split dt-bindings into different patches
2. Correct bindings for supported SoCs (mtk-uart.txt)

Ben Ho (1):
  arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and
    Makefile

Erin Lo (3):
  dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
  dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
  dt-bindings: serial: Add compatible for Mediatek MT8183

 Documentation/devicetree/bindings/arm/mediatek.txt |   4 +
 .../interrupt-controller/mediatek,sysirq.txt       |   1 +
 .../devicetree/bindings/serial/mtk-uart.txt        |   1 +
 arch/arm64/boot/dts/mediatek/Makefile              |   1 +
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts        |  31 ++++
 arch/arm64/boot/dts/mediatek/mt8183.dtsi           | 182 +++++++++++++++++++++
 6 files changed, 220 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183.dtsi

--
1.9.1

[PATCH v3 1/4] dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform

[Erin Lo]

This adds dt-binding documentation of cpu for Mediatek MT8183.

Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
 Documentation/devicetree/bindings/arm/mediatek.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index 7d21ab3..2754535 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -19,6 +19,7 @@ compatible: Must contain one of
    "mediatek,mt8127"
    "mediatek,mt8135"
    "mediatek,mt8173"
+   "mediatek,mt8183"
 
 
 Supported boards:
@@ -73,3 +74,6 @@ Supported boards:
 - MTK mt8173 tablet EVB:
     Required root node properties:
       - compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
+- Evaluation board for MT8183:
+    Required root node properties:
+      - compatible = "mediatek,mt8183-evb", "mediatek,mt8183";
-- 
1.9.1

Re: [PATCH v3 1/4] dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform

[Rob Herring]

On Thu, May 17, 2018 at 02:22:03PM +0800, Erin Lo wrote:
> This adds dt-binding documentation of cpu for Mediatek MT8183.
> 
> Signed-off-by: Erin Lo <erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/arm/mediatek.txt | 4 ++++
>  1 file changed, 4 insertions(+)

Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

[PATCH v3 2/4] dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183

[Erin Lo]

This adds dt-binding documentation of SYSIRQ for Mediatek MT8183 SoC
Platform.

Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
 .../devicetree/bindings/interrupt-controller/mediatek,sysirq.txt         | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
index 07bf0b9..5ff48a8 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
@@ -5,6 +5,7 @@ interrupt.
 
 Required properties:
 - compatible: should be
+	"mediatek,mt8183-sysirq", "mediatek,mt6577-sysirq": for MT8183
 	"mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173
 	"mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
 	"mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
-- 
1.9.1

Re: [PATCH v3 2/4] dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183

[Rob Herring]

On Thu, May 17, 2018 at 02:22:04PM +0800, Erin Lo wrote:
> This adds dt-binding documentation of SYSIRQ for Mediatek MT8183 SoC
> Platform.
> 
> Signed-off-by: Erin Lo <erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> ---
>  .../devicetree/bindings/interrupt-controller/mediatek,sysirq.txt         | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

[PATCH v3 3/4] dt-bindings: serial: Add compatible for Mediatek MT8183

[Erin Lo]

This adds dt-binding documentation of uart for Mediatek MT8183 SoC
Platform.

Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
 Documentation/devicetree/bindings/serial/mtk-uart.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index f73abff..4783336 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -15,6 +15,7 @@ Required properties:
   * "mediatek,mt8127-uart" for MT8127 compatible UARTS
   * "mediatek,mt8135-uart" for MT8135 compatible UARTS
   * "mediatek,mt8173-uart" for MT8173 compatible UARTS
+  * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
   * "mediatek,mt6577-uart" for MT6577 and all of the above
 
 - reg: The base address of the UART register bank.
-- 
1.9.1

Re: [PATCH v3 3/4] dt-bindings: serial: Add compatible for Mediatek MT8183

[Rob Herring]

On Thu, May 17, 2018 at 02:22:05PM +0800, Erin Lo wrote:
> This adds dt-binding documentation of uart for Mediatek MT8183 SoC
> Platform.
> 
> Signed-off-by: Erin Lo <erin.lo@mediatek.com>
> ---
>  Documentation/devicetree/bindings/serial/mtk-uart.txt | 1 +
>  1 file changed, 1 insertion(+)

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v3 4/4] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile

[Erin Lo]

From: Ben Ho <Ben.Ho@mediatek.com>

Add basic chip support for Mediatek 8183

Signed-off-by: Ben Ho <Ben.Ho@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/Makefile       |   1 +
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts |  31 +++++
 arch/arm64/boot/dts/mediatek/mt8183.dtsi    | 182 ++++++++++++++++++++++++++++
 3 files changed, 214 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index ac17f60..2836261 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -5,3 +5,4 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
new file mode 100644
index 0000000..9b52559
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ben Ho <ben.ho@mediatek.com>
+ *	   Erin Lo <erin.lo@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt8183.dtsi"
+
+/ {
+	model = "MediaTek MT8183 evaluation board";
+	compatible = "mediatek,mt8183-evb", "mediatek,mt8183";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
new file mode 100644
index 0000000..03edf9c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ben Ho <ben.ho@mediatek.com>
+ *	   Erin Lo <erin.lo@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt8183";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x002>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x003>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible      = "arm,psci-1.0";
+		method          = "smc";
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	gic: interrupt-controller@0c000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+		      <0 0x0c100000 0 0x200000>; /* GICR */
+		      <0 0x0c400000 0 0x2000>;   /* GICC */
+		      <0 0x0c410000 0 0x1000>;   /* GICH */
+		      <0 0x0c420000 0 0x2000>;   /* GICV */
+
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sysirq: intpol-controller@0c530a80 {
+		compatible = "mediatek,mt8183-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x0c530a80 0 0x50>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt8183-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x1000>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>, <&uart_clk>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt8183-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x1000>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>, <&uart_clk>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt8183-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x1000>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>, <&uart_clk>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+};
-- 
1.9.1

Re: [PATCH v3 4/4] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1108 bytes --]

Hi Ben,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.17-rc5 next-20180517]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Erin-Lo/Add-basic-support-for-Mediatek-MT8183-SoC/20180519-160349
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-alldefconfig (attached as .config)
compiler: aarch64-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm64 

All errors (new ones prefixed by >>):

>> Error: arch/arm64/boot/dts/mediatek/mt8183.dtsi:137.9-10 syntax error
   FATAL ERROR: Unable to parse input tree

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 8591 bytes --]

Re: [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC

[Matthias Brugger]

Hi Erin,

On 17/05/18 08:22, Erin Lo wrote:
> MT8183 is a SoC based on 64bit ARMv8 architecture.
> It contains 4 CA53 and 4 CA73 cores.
> MT8183 share many HW IP with MT65xx series.
> This patchset was tested on MT8183 evaluation board, and boot to shell ok.
> 
> This series contains document bindings, device tree including interrupt, uart.
> 
> Change in v3:
> 1. Fill out GICC, GICH, GICV regions
> 2. Update Copyright to 2018
> 
> Change in v2:
> 1. Split dt-bindings into different patches
> 2. Correct bindings for supported SoCs (mtk-uart.txt)
> 
> Ben Ho (1):
>   arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and
>     Makefile
> 
> Erin Lo (3):
>   dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
>   dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
>   dt-bindings: serial: Add compatible for Mediatek MT8183
> 

I'm a bit reluctant to take this series, as it will only enable the EVB board to
boot into a serial console. Are you planning to add support for other devices of
this SoC?

Apart please take into account that there is an issue with the dts file, as you
were told by the kbuild test robot.

Regards,
Matthias

Re: [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC

[Erin Lo]

On Mon, 2018-07-16 at 11:28 +0200, Matthias Brugger wrote:
> Hi Erin,
> 
> On 17/05/18 08:22, Erin Lo wrote:
> > MT8183 is a SoC based on 64bit ARMv8 architecture.
> > It contains 4 CA53 and 4 CA73 cores.
> > MT8183 share many HW IP with MT65xx series.
> > This patchset was tested on MT8183 evaluation board, and boot to shell ok.
> > 
> > This series contains document bindings, device tree including interrupt, uart.
> > 
> > Change in v3:
> > 1. Fill out GICC, GICH, GICV regions
> > 2. Update Copyright to 2018
> > 
> > Change in v2:
> > 1. Split dt-bindings into different patches
> > 2. Correct bindings for supported SoCs (mtk-uart.txt)
> > 
> > Ben Ho (1):
> >   arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and
> >     Makefile
> > 
> > Erin Lo (3):
> >   dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
> >   dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
> >   dt-bindings: serial: Add compatible for Mediatek MT8183
> > 
> 
> I'm a bit reluctant to take this series, as it will only enable the EVB board to
> boot into a serial console. Are you planning to add support for other devices of
> this SoC?
> 
> Apart please take into account that there is an issue with the dts file, as you
> were told by the kbuild test robot.
> 
> Regards,
> Matthias
> 

Hi, Matthias
Sorry for missing this letter...since mail proxy server.
We plan to add support all the devices of MT8183 in serious.
We have implemented the clock and pinctrl driver for upstream and they
are in internal review right now.

About the dts issue... do you suggest me to send new patch right now or
wait for clock and pinctrl driver ready then send them together?


Best Regards,
Erin

> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC

[Matthias Brugger]

On 20/07/18 10:19, Erin Lo wrote:
> On Mon, 2018-07-16 at 11:28 +0200, Matthias Brugger wrote:
>> Hi Erin,
>>
>> On 17/05/18 08:22, Erin Lo wrote:
>>> MT8183 is a SoC based on 64bit ARMv8 architecture.
>>> It contains 4 CA53 and 4 CA73 cores.
>>> MT8183 share many HW IP with MT65xx series.
>>> This patchset was tested on MT8183 evaluation board, and boot to shell ok.
>>>
>>> This series contains document bindings, device tree including interrupt, uart.
>>>
>>> Change in v3:
>>> 1. Fill out GICC, GICH, GICV regions
>>> 2. Update Copyright to 2018
>>>
>>> Change in v2:
>>> 1. Split dt-bindings into different patches
>>> 2. Correct bindings for supported SoCs (mtk-uart.txt)
>>>
>>> Ben Ho (1):
>>>   arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and
>>>     Makefile
>>>
>>> Erin Lo (3):
>>>   dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
>>>   dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
>>>   dt-bindings: serial: Add compatible for Mediatek MT8183
>>>
>>
>> I'm a bit reluctant to take this series, as it will only enable the EVB board to
>> boot into a serial console. Are you planning to add support for other devices of
>> this SoC?
>>
>> Apart please take into account that there is an issue with the dts file, as you
>> were told by the kbuild test robot.
>>
>> Regards,
>> Matthias
>>
> 
> Hi, Matthias
> Sorry for missing this letter...since mail proxy server.
> We plan to add support all the devices of MT8183 in serious.
> We have implemented the clock and pinctrl driver for upstream and they
> are in internal review right now.
> 

Nice to hear that :)

> About the dts issue... do you suggest me to send new patch right now or
> wait for clock and pinctrl driver ready then send them together?
> 

I would prefer that you send at least the clock controller together, so that we
don't have any dummy clocks in the basic device tree.

Regards,
Matthias

Re: [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC

[Erin Lo]

On Fri, 2018-07-20 at 12:44 +0200, Matthias Brugger wrote:
> 
> On 20/07/18 10:19, Erin Lo wrote:
> > On Mon, 2018-07-16 at 11:28 +0200, Matthias Brugger wrote:
> >> Hi Erin,
> >>
> >> On 17/05/18 08:22, Erin Lo wrote:
> >>> MT8183 is a SoC based on 64bit ARMv8 architecture.
> >>> It contains 4 CA53 and 4 CA73 cores.
> >>> MT8183 share many HW IP with MT65xx series.
> >>> This patchset was tested on MT8183 evaluation board, and boot to shell ok.
> >>>
> >>> This series contains document bindings, device tree including interrupt, uart.
> >>>
> >>> Change in v3:
> >>> 1. Fill out GICC, GICH, GICV regions
> >>> 2. Update Copyright to 2018
> >>>
> >>> Change in v2:
> >>> 1. Split dt-bindings into different patches
> >>> 2. Correct bindings for supported SoCs (mtk-uart.txt)
> >>>
> >>> Ben Ho (1):
> >>>   arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and
> >>>     Makefile
> >>>
> >>> Erin Lo (3):
> >>>   dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
> >>>   dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
> >>>   dt-bindings: serial: Add compatible for Mediatek MT8183
> >>>
> >>
> >> I'm a bit reluctant to take this series, as it will only enable the EVB board to
> >> boot into a serial console. Are you planning to add support for other devices of
> >> this SoC?
> >>
> >> Apart please take into account that there is an issue with the dts file, as you
> >> were told by the kbuild test robot.
> >>
> >> Regards,
> >> Matthias
> >>
> > 
> > Hi, Matthias
> > Sorry for missing this letter...since mail proxy server.
> > We plan to add support all the devices of MT8183 in serious.
> > We have implemented the clock and pinctrl driver for upstream and they
> > are in internal review right now.
> > 
> 
> Nice to hear that :)
> 
> > About the dts issue... do you suggest me to send new patch right now or
> > wait for clock and pinctrl driver ready then send them together?
> > 
> 
> I would prefer that you send at least the clock controller together, so that we
> don't have any dummy clocks in the basic device tree.
> 
> Regards,
> Matthias
> 

Got it! Next patch, we will send them with clock controller without
dummy clocks in the basic device tree.
By the way, the clock controller driver of MT8183 is a little bit
different from former ICs, so we need more time to prepare them.
We will send them to public as soon as possible.

Best Regards,
Erin

> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH v3 0/4] Add basic support for Mediatek MT8183 SoC

[Matthias Brugger]

On 21/07/18 09:28, Erin Lo wrote:
> On Fri, 2018-07-20 at 12:44 +0200, Matthias Brugger wrote:
>>
>> On 20/07/18 10:19, Erin Lo wrote:
>>> On Mon, 2018-07-16 at 11:28 +0200, Matthias Brugger wrote:
>>>> Hi Erin,
>>>>
>>>> On 17/05/18 08:22, Erin Lo wrote:
>>>>> MT8183 is a SoC based on 64bit ARMv8 architecture.
>>>>> It contains 4 CA53 and 4 CA73 cores.
>>>>> MT8183 share many HW IP with MT65xx series.
>>>>> This patchset was tested on MT8183 evaluation board, and boot to shell ok.
>>>>>
>>>>> This series contains document bindings, device tree including interrupt, uart.
>>>>>
>>>>> Change in v3:
>>>>> 1. Fill out GICC, GICH, GICV regions
>>>>> 2. Update Copyright to 2018
>>>>>
>>>>> Change in v2:
>>>>> 1. Split dt-bindings into different patches
>>>>> 2. Correct bindings for supported SoCs (mtk-uart.txt)
>>>>>
>>>>> Ben Ho (1):
>>>>>   arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and
>>>>>     Makefile
>>>>>
>>>>> Erin Lo (3):
>>>>>   dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
>>>>>   dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
>>>>>   dt-bindings: serial: Add compatible for Mediatek MT8183
>>>>>
>>>>
>>>> I'm a bit reluctant to take this series, as it will only enable the EVB board to
>>>> boot into a serial console. Are you planning to add support for other devices of
>>>> this SoC?
>>>>
>>>> Apart please take into account that there is an issue with the dts file, as you
>>>> were told by the kbuild test robot.
>>>>
>>>> Regards,
>>>> Matthias
>>>>
>>>
>>> Hi, Matthias
>>> Sorry for missing this letter...since mail proxy server.
>>> We plan to add support all the devices of MT8183 in serious.
>>> We have implemented the clock and pinctrl driver for upstream and they
>>> are in internal review right now.
>>>
>>
>> Nice to hear that :)
>>
>>> About the dts issue... do you suggest me to send new patch right now or
>>> wait for clock and pinctrl driver ready then send them together?
>>>
>>
>> I would prefer that you send at least the clock controller together, so that we
>> don't have any dummy clocks in the basic device tree.
>>
>> Regards,
>> Matthias
>>
> 
> Got it! Next patch, we will send them with clock controller without
> dummy clocks in the basic device tree.
> By the way, the clock controller driver of MT8183 is a little bit
> different from former ICs, so we need more time to prepare them.
> We will send them to public as soon as possible.
> 

Thanks for the info.

Best regards,
Matthias