[PATCH v6 01/10] dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml

[PATCH v6 01/10] dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml

[Amit Singh Tomar]

Converts the device tree bindings for the Actions Semi Owl SoCs DMA
Controller over to YAML schemas.

It also adds new compatible string "actions,s700-dma".

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v5:
	* Removed Rob's Reviewed-by tag as his bot found errors
	  running 'make dt_binding_check'.
	* Fixed the errore reported by Rob's bot, adjusting the reg
	  property in example.
Changes since v4:
        * Added Rob's Reviewed-by tag.
        * Re-order it from 05/10 to 01/10.
Changes since v3:
        * No change.
Changes since v2:
        * Addressed Rob's comments:
           - removed unnecessary description.
           - added unevaluatedProperties
           - added relevant information about
             dma-channels and dma-request
        * Added power-domain property.
Change since v1:
        * Updated the description field to reflect
          only the necessary information.
        * replaced the maxItems field with description for each
          controller attribute(except interrupts).
        * Replaced the clock macro with number to keep the example
          as independent as possible.
---
 Documentation/devicetree/bindings/dma/owl-dma.txt  | 47 -------------
 Documentation/devicetree/bindings/dma/owl-dma.yaml | 79 ++++++++++++++++++++++
 2 files changed, 79 insertions(+), 47 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/dma/owl-dma.txt
 create mode 100644 Documentation/devicetree/bindings/dma/owl-dma.yaml

diff --git a/Documentation/devicetree/bindings/dma/owl-dma.txt b/Documentation/devicetree/bindings/dma/owl-dma.txt
deleted file mode 100644
index 03e9bb12b75f..000000000000
--- a/Documentation/devicetree/bindings/dma/owl-dma.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* Actions Semi Owl SoCs DMA controller
-
-This binding follows the generic DMA bindings defined in dma.txt.
-
-Required properties:
-- compatible: Should be "actions,s900-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain 4 interrupts shared by all channel.
-- #dma-cells: Must be <1>. Used to represent the number of integer
-              cells in the dmas property of client device.
-- dma-channels: Physical channels supported.
-- dma-requests: Number of DMA request signals supported by the controller.
-                Refer to Documentation/devicetree/bindings/dma/dma.txt
-- clocks: Phandle and Specifier of the clock feeding the DMA controller.
-
-Example:
-
-Controller:
-                dma: dma-controller@e0260000 {
-                        compatible = "actions,s900-dma";
-                        reg = <0x0 0xe0260000 0x0 0x1000>;
-                        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-                                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-                                     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-                                     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-                        #dma-cells = <1>;
-                        dma-channels = <12>;
-                        dma-requests = <46>;
-                        clocks = <&clock CLK_DMAC>;
-                };
-
-Client:
-
-DMA clients connected to the Actions Semi Owl SoCs DMA controller must
-use the format described in the dma.txt file, using a two-cell specifier
-for each channel.
-
-The two cells in order are:
-1. A phandle pointing to the DMA controller.
-2. The channel id.
-
-uart5: serial@e012a000 {
-        ...
-        dma-names = "tx", "rx";
-        dmas = <&dma 26>, <&dma 27>;
-        ...
-};
diff --git a/Documentation/devicetree/bindings/dma/owl-dma.yaml b/Documentation/devicetree/bindings/dma/owl-dma.yaml
new file mode 100644
index 000000000000..256d62af2c64
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/owl-dma.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/owl-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs DMA controller
+
+description: |
+  The OWL DMA is a general-purpose direct memory access controller capable of
+  supporting 10 and 12 independent DMA channels for S700 and S900 SoCs
+  respectively.
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - actions,s900-dma
+      - actions,s700-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      controller supports 4 interrupts, which are freely assignable to the
+      DMA channels.
+    maxItems: 4
+
+  "#dma-cells":
+    const: 1
+
+  dma-channels:
+    maximum: 12
+
+  dma-requests:
+    maximum: 46
+
+  clocks:
+    maxItems: 1
+    description:
+      Phandle and Specifier of the clock feeding the DMA controller.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - dma-channels
+  - dma-requests
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    dma: dma-controller@e0260000 {
+        compatible = "actions,s900-dma";
+        reg = <0xe0260000 0x1000>;
+        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <1>;
+        dma-channels = <12>;
+        dma-requests = <46>;
+        clocks = <&clock 22>;
+    };
+
+...
-- 
2.7.4

[PATCH v6 05/10] arm64: dts: actions: limit address range for pinctrl node

[Amit Singh Tomar]

After commit 7cdf8446ed1d ("arm64: dts: actions: Add pinctrl node for
Actions Semi S700") following error has been observed while booting
Linux on Cubieboard7-lite(based on S700 SoC).

[    0.257415] pinctrl-s700 e01b0000.pinctrl: can't request region for
resource [mem 0xe01b0000-0xe01b0fff]
[    0.266902] pinctrl-s700: probe of e01b0000.pinctrl failed with error -16

This is due to the fact that memory range for "sps" power domain controller
clashes with pinctrl.

One way to fix it, is to limit pinctrl address range which is safe
to do as current pinctrl driver uses address range only up to 0x100.

This commit limits the pinctrl address range to 0x100 so that it doesn't
conflict with sps range.

Fixes: 7cdf8446ed1d ("arm64: dts: actions: Add pinctrl node for Actions
Semi S700")

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v5:
	* Added Mani's Reviewed-by: tag.
Changes since v4:
        * Reordered it from 04/10 to 05/10.
Changes since v3:
        * No change.
Changes since v2:
        * this is no more don't merge and fixed
          the broken S700 boot by limiting pinctrl
          address range.
        * Modified the subject to reflect the changes.
Changes since v1:
        * No change.
Changes since RFC:
        * kept as do not merge.
---
 arch/arm64/boot/dts/actions/s700.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index 2006ad5424fa..f8eb72bb4125 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -231,7 +231,7 @@
 
 		pinctrl: pinctrl@e01b0000 {
 			compatible = "actions,s700-pinctrl";
-			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			reg = <0x0 0xe01b0000 0x0 0x100>;
 			clocks = <&cmu CLK_GPIO>;
 			gpio-controller;
 			gpio-ranges = <&pinctrl 0 0 136>;
-- 
2.7.4

[PATCH v6 06/10] arm64: dts: actions: Add DMA Controller for S700

[Amit Singh Tomar]

This commit adds DMA controller present on Actions S700, it differs from
S900 in terms of number of dma channels and requests.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v5:
        * Added Mani's Reviewed-by: tag.
Changes since v4:
        * No change.
Changes since v3:
        * Fixed typo in commit message.
        * Placed owl-s700-powergate.h in alphabetical order.
Changes since v2:
        * added power-domain property as sps
          is enabled now and DMA needs it.
Changes since v1:
        * No Change.
Changes since RFC:
        * No Change.
---
 arch/arm64/boot/dts/actions/s700.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index f8eb72bb4125..2c78caebf515 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/clock/actions,s700-cmu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/owl-s700-powergate.h>
 #include <dt-bindings/reset/actions,s700-reset.h>
 
 / {
@@ -244,5 +245,19 @@
 				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		dma: dma-controller@e0230000 {
+			compatible = "actions,s700-dma";
+			reg = <0x0 0xe0230000 0x0 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <10>;
+			dma-requests = <44>;
+			clocks = <&cmu CLK_DMAC>;
+			power-domains = <&sps S700_PD_DMA>;
+		};
 	};
 };
-- 
2.7.4

[PATCH v6 07/10] dt-bindings: reset: s700: Add binding constants for mmc

[Amit Singh Tomar]

This commit adds device tree binding reset constants for mmc controller
present on Actions S700 Soc.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v5:
        * Added Mani's Reviewed-by: tag.
Changes since v4:
        * No change.
Changes since v3:
        * No change.
Changes since v2:
        * No change.
Changes since v1:
        * No change.
Changes since RFC:
        * added Rob's acked-by tag
---
 include/dt-bindings/reset/actions,s700-reset.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/dt-bindings/reset/actions,s700-reset.h b/include/dt-bindings/reset/actions,s700-reset.h
index 5e3b16b8ef53..a3118de6d7aa 100644
--- a/include/dt-bindings/reset/actions,s700-reset.h
+++ b/include/dt-bindings/reset/actions,s700-reset.h
@@ -30,5 +30,8 @@
 #define RESET_UART4				20
 #define RESET_UART5				21
 #define RESET_UART6				22
+#define RESET_SD0				23
+#define RESET_SD1				24
+#define RESET_SD2				25
 
 #endif /* __DT_BINDINGS_ACTIONS_S700_RESET_H */
-- 
2.7.4

[PATCH v6 08/10] dt-bindings: mmc: owl: add compatible string actions,s700-mmc

[Amit Singh Tomar]

The commit adds a new SoC specific compatible string "actions,s700-mmc"
in combination with more generic string "actions,owl-mmc".

Placement order of these strings should abide by the principle of
"from most specific to most general".

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v5:
        * Added Mani's Reviewed-by: tag.
Changes since v4:
        * No change.
Changes since v3:
        * No change.
Changes since v2:
        * Added Rob's Reviewed-by tag
---
 Documentation/devicetree/bindings/mmc/owl-mmc.yaml | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
index 1380501fb8f0..5eab25ccf7ae 100644
--- a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
@@ -14,7 +14,11 @@ maintainers:
 
 properties:
   compatible:
-    const: actions,owl-mmc
+    oneOf:
+      - const: actions,owl-mmc
+      - items:
+          - const: actions,s700-mmc
+          - const: actions,owl-mmc
 
   reg:
     maxItems: 1
-- 
2.7.4

[PATCH v6 09/10] arm64: dts: actions: Add MMC controller support for S700

[Amit Singh Tomar]

This commits adds support for MMC controllers present on Actions S700 SoC,
there are 3 MMC controllers in this SoC which can be used for accessing
SD/EMMC/SDIO cards.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v5:
        * Added Mani's Reviewed-by: tag.
Changes since v4:
        * No change.
Changes since v3:
        * No change.
Changes since v2:
        * No change.
Changes since v1:
        * Added SoC specific compatibe string.
Changes since RFC:
        * No change
---
 arch/arm64/boot/dts/actions/s700.dtsi | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index 2c78caebf515..9ed88aafc2da 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -259,5 +259,38 @@
 			clocks = <&cmu CLK_DMAC>;
 			power-domains = <&sps S700_PD_DMA>;
 		};
+
+		mmc0: mmc@e0210000 {
+			compatible = "actions,s700-mmc", "actions,owl-mmc";
+			reg = <0x0 0xe0210000 0x0 0x4000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc@e0214000 {
+			compatible = "actions,s700-mmc", "actions,owl-mmc";
+			reg = <0x0 0xe0214000 0x0 0x4000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc@e0218000 {
+			compatible = "actions,s700-mmc", "actions,owl-mmc";
+			reg = <0x0 0xe0218000 0x0 0x4000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
 	};
 };
-- 
2.7.4

[PATCH v6 10/10] arm64: dts: actions: Add uSD support for Cubieboard7

[Amit Singh Tomar]

This commit adds uSD support for Cubieboard7 board based on Actions Semi
S700 SoC. SD0 is connected to uSD slot. Since there is no PMIC support
added yet, fixed regulator has been used as a regulator node.

Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
---
Changes since v5:
	* Removed the Fixed regulators as these are 
	  not needed.
Changes since v4:
        * No change.
Changes since v3:
        * No change.
Changes since v2:
        * No change.
Changes since v1:
        * No change.
Changes since RFC:
        * No change.
---
 arch/arm64/boot/dts/actions/s700-cubieboard7.dts | 22 ++++++++++++++++++++++
 arch/arm64/boot/dts/actions/s700.dtsi            |  1 +
 2 files changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
index 63e375cd9eb4..eaaf8f876203 100644
--- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
+++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
@@ -13,6 +13,7 @@
 
 	aliases {
 		serial3 = &uart3;
+		mmc0 = &mmc0;
 	};
 
 	chosen {
@@ -81,6 +82,14 @@
 			bias-pull-up;
 		};
 	};
+
+	mmc0_default: mmc0_default {
+		pinmux {
+			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+				 "sd0_cmd_mfp", "sd0_clk_mfp";
+			function = "sd0";
+		};
+	};
 };
 
 &timer {
@@ -90,3 +99,16 @@
 &uart3 {
 	status = "okay";
 };
+
+/* uSD */
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_default>;
+	cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>;
+	no-sdio;
+	no-mmc;
+	no-1-8-v;
+	bus-width = <4>;
+};
+
diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
index 9ed88aafc2da..ba498cf9217d 100644
--- a/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/actions,s700-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/owl-s700-powergate.h>
 #include <dt-bindings/reset/actions,s700-reset.h>
-- 
2.7.4

Re: [PATCH v6 10/10] arm64: dts: actions: Add uSD support for Cubieboard7

[Manivannan Sadhasivam]

On Sat, Jul 18, 2020 at 02:49:34PM +0530, Amit Singh Tomar wrote:
> This commit adds uSD support for Cubieboard7 board based on Actions Semi
> S700 SoC. SD0 is connected to uSD slot. Since there is no PMIC support
> added yet, fixed regulator has been used as a regulator node.
> 
> Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
> ---
> Changes since v5:
> 	* Removed the Fixed regulators as these are 
> 	  not needed.

I just asked you to remove the unused (ie. unreferenced fixed regulators) but
you seem to have removed sd_vcc which was supplied to uSD :/ How can the uSD
card work without a power supply? Forget the fact that the regulator was enabled
by bootloader but you are not properly describing it in DT here. The idea is to
model the actual hardware in DT and if you are not able to model the regulator
using PMIC then use fixed-regulator. Hope this makes it clear!

Thanks,
Mani

> Changes since v4:
>         * No change.
> Changes since v3:
>         * No change.
> Changes since v2:
>         * No change.
> Changes since v1:
>         * No change.
> Changes since RFC:
>         * No change.
> ---
>  arch/arm64/boot/dts/actions/s700-cubieboard7.dts | 22 ++++++++++++++++++++++
>  arch/arm64/boot/dts/actions/s700.dtsi            |  1 +
>  2 files changed, 23 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> index 63e375cd9eb4..eaaf8f876203 100644
> --- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> +++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> @@ -13,6 +13,7 @@
>  
>  	aliases {
>  		serial3 = &uart3;
> +		mmc0 = &mmc0;
>  	};
>  
>  	chosen {
> @@ -81,6 +82,14 @@
>  			bias-pull-up;
>  		};
>  	};
> +
> +	mmc0_default: mmc0_default {
> +		pinmux {
> +			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
> +				 "sd0_cmd_mfp", "sd0_clk_mfp";
> +			function = "sd0";
> +		};
> +	};
>  };
>  
>  &timer {
> @@ -90,3 +99,16 @@
>  &uart3 {
>  	status = "okay";
>  };
> +
> +/* uSD */
> +&mmc0 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc0_default>;
> +	cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>;
> +	no-sdio;
> +	no-mmc;
> +	no-1-8-v;
> +	bus-width = <4>;
> +};
> +
> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
> index 9ed88aafc2da..ba498cf9217d 100644
> --- a/arch/arm64/boot/dts/actions/s700.dtsi
> +++ b/arch/arm64/boot/dts/actions/s700.dtsi
> @@ -4,6 +4,7 @@
>   */
>  
>  #include <dt-bindings/clock/actions,s700-cmu.h>
> +#include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/power/owl-s700-powergate.h>
>  #include <dt-bindings/reset/actions,s700-reset.h>
> -- 
> 2.7.4
>