[PATCH v5 00/12] ASoC: qcom: Add support for SC7180 lpass variant

[PATCH v5 00/12] ASoC: qcom: Add support for SC7180 lpass variant

[Rohit kumar]

This patch chain add audio support for SC7180 soc by doing the required
modification in existing common lpass-cpu/lpass-platform driver.
This also fixes some concurrency issue.

This patch series is already tested by Srinivas on Dragon Board 410c.
Changes since v4:
        - Updated compatible string for sc7180 lpass cpu as suggested by Rob
        - Addressed comments by Rob in yaml Documentation.

Ajit Pandey (4):
  ASoC: qcom: Add common array to initialize soc based core clocks
  ASoC: qcom: lpass-platform: Replace card->dev with component->dev
  include: dt-bindings: sound: Add sc7180-lpass bindings header
  ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio

Rohit kumar (8):
  ASoC: qcom: lpass-cpu: Move ahbix clk to platform specific function
  ASoC: qcom: lpass-platform: fix memory leak
  ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers
  ASoC: qcom: lpass-cpu: fix concurrency issue
  dt-bindings: sound: lpass-cpu: Add sc7180 lpass cpu node
  ASoC: qcom: lpass-cpu: Use platform_get_resource
  ASoC: qcom: lpass-platform: Use platform_get_irq
  dt-bindings: sound: lpass-cpu: Move to yaml format

 .../devicetree/bindings/sound/qcom,lpass-cpu.txt   |  79 --------
 .../devicetree/bindings/sound/qcom,lpass-cpu.yaml  | 179 +++++++++++++++++
 include/dt-bindings/sound/sc7180-lpass.h           |  10 +
 sound/soc/qcom/Kconfig                             |   5 +
 sound/soc/qcom/Makefile                            |   2 +
 sound/soc/qcom/lpass-apq8016.c                     |  86 ++++++--
 sound/soc/qcom/lpass-cpu.c                         | 204 ++++++++++---------
 sound/soc/qcom/lpass-ipq806x.c                     |  67 +++++++
 sound/soc/qcom/lpass-lpaif-reg.h                   | 157 ++++++++-------
 sound/soc/qcom/lpass-platform.c                    | 155 +++++++++++----
 sound/soc/qcom/lpass-sc7180.c                      | 216 +++++++++++++++++++++
 sound/soc/qcom/lpass.h                             |  63 +++++-
 12 files changed, 924 insertions(+), 299 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
 create mode 100644 include/dt-bindings/sound/sc7180-lpass.h
 create mode 100644 sound/soc/qcom/lpass-sc7180.c

-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH v5 01/12] ASoC: qcom: Add common array to initialize soc based core clocks

[Rohit kumar]

From: Ajit Pandey <ajitp@codeaurora.org>

LPASS variants have their own soc specific clocks that needs to be
enabled for MI2S audio support. Added a common variable in drvdata to
initialize such clocks using bulk clk api. Such clock names is
defined in variants specific data and needs to fetched during init.

Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/lpass-apq8016.c | 39 +++++++++++++++++++--------------------
 sound/soc/qcom/lpass.h         | 10 +++++++---
 2 files changed, 26 insertions(+), 23 deletions(-)

diff --git a/sound/soc/qcom/lpass-apq8016.c b/sound/soc/qcom/lpass-apq8016.c
index b3610d0..8210e37 100644
--- a/sound/soc/qcom/lpass-apq8016.c
+++ b/sound/soc/qcom/lpass-apq8016.c
@@ -161,32 +161,27 @@ static int apq8016_lpass_free_dma_channel(struct lpass_data *drvdata, int chan)
 static int apq8016_lpass_init(struct platform_device *pdev)
 {
 	struct lpass_data *drvdata = platform_get_drvdata(pdev);
+	struct lpass_variant *variant = drvdata->variant;
 	struct device *dev = &pdev->dev;
-	int ret;
+	int ret, i;
 
-	drvdata->pcnoc_mport_clk = devm_clk_get(dev, "pcnoc-mport-clk");
-	if (IS_ERR(drvdata->pcnoc_mport_clk)) {
-		dev_err(dev, "error getting pcnoc-mport-clk: %ld\n",
-			PTR_ERR(drvdata->pcnoc_mport_clk));
-		return PTR_ERR(drvdata->pcnoc_mport_clk);
-	}
 
-	ret = clk_prepare_enable(drvdata->pcnoc_mport_clk);
+	drvdata->clks = devm_kcalloc(dev, variant->num_clks,
+				     sizeof(*drvdata->clks), GFP_KERNEL);
+	drvdata->num_clks = variant->num_clks;
+
+	for (i = 0; i < drvdata->num_clks; i++)
+		drvdata->clks[i].id = variant->clk_name[i];
+
+	ret = devm_clk_bulk_get(dev, drvdata->num_clks, drvdata->clks);
 	if (ret) {
-		dev_err(dev, "Error enabling pcnoc-mport-clk: %d\n", ret);
+		dev_err(dev, "Failed to get clocks %d\n", ret);
 		return ret;
 	}
 
-	drvdata->pcnoc_sway_clk = devm_clk_get(dev, "pcnoc-sway-clk");
-	if (IS_ERR(drvdata->pcnoc_sway_clk)) {
-		dev_err(dev, "error getting pcnoc-sway-clk: %ld\n",
-			PTR_ERR(drvdata->pcnoc_sway_clk));
-		return PTR_ERR(drvdata->pcnoc_sway_clk);
-	}
-
-	ret = clk_prepare_enable(drvdata->pcnoc_sway_clk);
+	ret = clk_bulk_prepare_enable(drvdata->num_clks, drvdata->clks);
 	if (ret) {
-		dev_err(dev, "Error enabling pcnoc_sway_clk: %d\n", ret);
+		dev_err(dev, "apq8016 clk_enable failed\n");
 		return ret;
 	}
 
@@ -197,8 +192,7 @@ static int apq8016_lpass_exit(struct platform_device *pdev)
 {
 	struct lpass_data *drvdata = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(drvdata->pcnoc_mport_clk);
-	clk_disable_unprepare(drvdata->pcnoc_sway_clk);
+	clk_bulk_disable_unprepare(drvdata->num_clks, drvdata->clks);
 
 	return 0;
 }
@@ -219,6 +213,11 @@ static struct lpass_variant apq8016_data = {
 	.wrdma_reg_stride	= 0x1000,
 	.wrdma_channel_start	= 5,
 	.wrdma_channels		= 2,
+	.clk_name		= (const char*[]) {
+				   "pcnoc-mport-clk",
+				   "pcnoc-sway-clk",
+				  },
+	.num_clks		= 2,
 	.dai_driver		= apq8016_lpass_cpu_dai_driver,
 	.num_dai		= ARRAY_SIZE(apq8016_lpass_cpu_dai_driver),
 	.dai_osr_clk_names	= (const char *[]) {
diff --git a/sound/soc/qcom/lpass.h b/sound/soc/qcom/lpass.h
index bd19ec5..450020e 100644
--- a/sound/soc/qcom/lpass.h
+++ b/sound/soc/qcom/lpass.h
@@ -51,9 +51,9 @@ struct lpass_data {
 	/* used it for handling interrupt per dma channel */
 	struct snd_pcm_substream *substream[LPASS_MAX_DMA_CHANNELS];
 
-	/* 8016 specific */
-	struct clk *pcnoc_mport_clk;
-	struct clk *pcnoc_sway_clk;
+	/* SOC specific clock list */
+	struct clk_bulk_data *clks;
+	int num_clks;
 
 };
 
@@ -89,6 +89,10 @@ struct lpass_variant {
 	int num_dai;
 	const char * const *dai_osr_clk_names;
 	const char * const *dai_bit_clk_names;
+
+	/* SOC specific clocks configuration */
+	const char **clk_name;
+	int num_clks;
 };
 
 /* register the platform driver from the CPU DAI driver */
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

Re: [PATCH v5 01/12] ASoC: qcom: Add common array to initialize soc based core clocks

[Rohit Kumar]

Hello Mark,

Do you see any concern with patches (1-11).
As of now, there is comment only in patch 12 from Rob which I am
planning to update once other patches are merged. Can you
please review and let me know if anything is missing.

Thanks,
Rohit
On 8/4/2020 1:37 PM, Rohit kumar wrote:
> From: Ajit Pandey <ajitp@codeaurora.org>
>
> LPASS variants have their own soc specific clocks that needs to be
> enabled for MI2S audio support. Added a common variable in drvdata to
> initialize such clocks using bulk clk api. Such clock names is
> defined in variants specific data and needs to fetched during init.
>
> Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>   sound/soc/qcom/lpass-apq8016.c | 39 +++++++++++++++++++--------------------
>   sound/soc/qcom/lpass.h         | 10 +++++++---
>   2 files changed, 26 insertions(+), 23 deletions(-)
>
> diff --git a/sound/soc/qcom/lpass-apq8016.c b/sound/soc/qcom/lpass-apq8016.c
> index b3610d0..8210e37 100644
> --- a/sound/soc/qcom/lpass-apq8016.c
> +++ b/sound/soc/qcom/lpass-apq8016.c
> @@ -161,32 +161,27 @@ static int apq8016_lpass_free_dma_channel(struct lpass_data *drvdata, int chan)
>   static int apq8016_lpass_init(struct platform_device *pdev)
>   {
>   	struct lpass_data *drvdata = platform_get_drvdata(pdev);
> +	struct lpass_variant *variant = drvdata->variant;
>   	struct device *dev = &pdev->dev;
> -	int ret;
> +	int ret, i;
>   
> -	drvdata->pcnoc_mport_clk = devm_clk_get(dev, "pcnoc-mport-clk");
> -	if (IS_ERR(drvdata->pcnoc_mport_clk)) {
> -		dev_err(dev, "error getting pcnoc-mport-clk: %ld\n",
> -			PTR_ERR(drvdata->pcnoc_mport_clk));
> -		return PTR_ERR(drvdata->pcnoc_mport_clk);
> -	}
>   
> -	ret = clk_prepare_enable(drvdata->pcnoc_mport_clk);
> +	drvdata->clks = devm_kcalloc(dev, variant->num_clks,
> +				     sizeof(*drvdata->clks), GFP_KERNEL);
> +	drvdata->num_clks = variant->num_clks;
> +
> +	for (i = 0; i < drvdata->num_clks; i++)
> +		drvdata->clks[i].id = variant->clk_name[i];
> +
> +	ret = devm_clk_bulk_get(dev, drvdata->num_clks, drvdata->clks);
>   	if (ret) {
> -		dev_err(dev, "Error enabling pcnoc-mport-clk: %d\n", ret);
> +		dev_err(dev, "Failed to get clocks %d\n", ret);
>   		return ret;
>   	}
>   
> -	drvdata->pcnoc_sway_clk = devm_clk_get(dev, "pcnoc-sway-clk");
> -	if (IS_ERR(drvdata->pcnoc_sway_clk)) {
> -		dev_err(dev, "error getting pcnoc-sway-clk: %ld\n",
> -			PTR_ERR(drvdata->pcnoc_sway_clk));
> -		return PTR_ERR(drvdata->pcnoc_sway_clk);
> -	}
> -
> -	ret = clk_prepare_enable(drvdata->pcnoc_sway_clk);
> +	ret = clk_bulk_prepare_enable(drvdata->num_clks, drvdata->clks);
>   	if (ret) {
> -		dev_err(dev, "Error enabling pcnoc_sway_clk: %d\n", ret);
> +		dev_err(dev, "apq8016 clk_enable failed\n");
>   		return ret;
>   	}
>   
> @@ -197,8 +192,7 @@ static int apq8016_lpass_exit(struct platform_device *pdev)
>   {
>   	struct lpass_data *drvdata = platform_get_drvdata(pdev);
>   
> -	clk_disable_unprepare(drvdata->pcnoc_mport_clk);
> -	clk_disable_unprepare(drvdata->pcnoc_sway_clk);
> +	clk_bulk_disable_unprepare(drvdata->num_clks, drvdata->clks);
>   
>   	return 0;
>   }
> @@ -219,6 +213,11 @@ static struct lpass_variant apq8016_data = {
>   	.wrdma_reg_stride	= 0x1000,
>   	.wrdma_channel_start	= 5,
>   	.wrdma_channels		= 2,
> +	.clk_name		= (const char*[]) {
> +				   "pcnoc-mport-clk",
> +				   "pcnoc-sway-clk",
> +				  },
> +	.num_clks		= 2,
>   	.dai_driver		= apq8016_lpass_cpu_dai_driver,
>   	.num_dai		= ARRAY_SIZE(apq8016_lpass_cpu_dai_driver),
>   	.dai_osr_clk_names	= (const char *[]) {
> diff --git a/sound/soc/qcom/lpass.h b/sound/soc/qcom/lpass.h
> index bd19ec5..450020e 100644
> --- a/sound/soc/qcom/lpass.h
> +++ b/sound/soc/qcom/lpass.h
> @@ -51,9 +51,9 @@ struct lpass_data {
>   	/* used it for handling interrupt per dma channel */
>   	struct snd_pcm_substream *substream[LPASS_MAX_DMA_CHANNELS];
>   
> -	/* 8016 specific */
> -	struct clk *pcnoc_mport_clk;
> -	struct clk *pcnoc_sway_clk;
> +	/* SOC specific clock list */
> +	struct clk_bulk_data *clks;
> +	int num_clks;
>   
>   };
>   
> @@ -89,6 +89,10 @@ struct lpass_variant {
>   	int num_dai;
>   	const char * const *dai_osr_clk_names;
>   	const char * const *dai_bit_clk_names;
> +
> +	/* SOC specific clocks configuration */
> +	const char **clk_name;
> +	int num_clks;
>   };
>   
>   /* register the platform driver from the CPU DAI driver */

-- 
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.

Re: [PATCH v5 01/12] ASoC: qcom: Add common array to initialize soc based core clocks

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 597 bytes --]

On Tue, Aug 11, 2020 at 04:13:03PM +0530, Rohit Kumar wrote:

> Do you see any concern with patches (1-11).
> As of now, there is comment only in patch 12 from Rob which I am
> planning to update once other patches are merged. Can you
> please review and let me know if anything is missing.

Please just post the fixed series instead of sending me a stream of
pings, it must be taking you more time to do this than it would to just
send the fix.  I'm not going to apply your patches during the merge
window, they are not bug fixes and sending me content free pings just
makes me delay the review.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v5 02/12] ASoC: qcom: lpass-cpu: Move ahbix clk to platform specific function

[Rohit kumar]

Ahbix clock is optional clock and not needed for all platforms.
Move it to lpass-apq8016/ipq806x as it is not needed for sc7180.

Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/lpass-apq8016.c | 27 ++++++++++++++++++++++++++
 sound/soc/qcom/lpass-cpu.c     | 40 ++++++++++-----------------------------
 sound/soc/qcom/lpass-ipq806x.c | 43 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 80 insertions(+), 30 deletions(-)

diff --git a/sound/soc/qcom/lpass-apq8016.c b/sound/soc/qcom/lpass-apq8016.c
index 8210e37..fe4c258 100644
--- a/sound/soc/qcom/lpass-apq8016.c
+++ b/sound/soc/qcom/lpass-apq8016.c
@@ -185,7 +185,33 @@ static int apq8016_lpass_init(struct platform_device *pdev)
 		return ret;
 	}
 
+	drvdata->ahbix_clk = devm_clk_get(dev, "ahbix-clk");
+	if (IS_ERR(drvdata->ahbix_clk)) {
+		dev_err(dev, "error getting ahbix-clk: %ld\n",
+				PTR_ERR(drvdata->ahbix_clk));
+		ret = PTR_ERR(drvdata->ahbix_clk);
+		goto err_ahbix_clk;
+	}
+
+	ret = clk_set_rate(drvdata->ahbix_clk, LPASS_AHBIX_CLOCK_FREQUENCY);
+	if (ret) {
+		dev_err(dev, "error setting rate on ahbix_clk: %d\n", ret);
+		goto err_ahbix_clk;
+	}
+	dev_dbg(dev, "set ahbix_clk rate to %lu\n",
+			clk_get_rate(drvdata->ahbix_clk));
+
+	ret = clk_prepare_enable(drvdata->ahbix_clk);
+	if (ret) {
+		dev_err(dev, "error enabling ahbix_clk: %d\n", ret);
+		goto err_ahbix_clk;
+	}
+
 	return 0;
+
+err_ahbix_clk:
+	clk_bulk_disable_unprepare(drvdata->num_clks, drvdata->clks);
+	return ret;
 }
 
 static int apq8016_lpass_exit(struct platform_device *pdev)
@@ -193,6 +219,7 @@ static int apq8016_lpass_exit(struct platform_device *pdev)
 	struct lpass_data *drvdata = platform_get_drvdata(pdev);
 
 	clk_bulk_disable_unprepare(drvdata->num_clks, drvdata->clks);
+	clk_disable_unprepare(drvdata->ahbix_clk);
 
 	return 0;
 }
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index e00a4af..f0c7e93 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -566,8 +566,13 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
 		return PTR_ERR(drvdata->lpaif_map);
 	}
 
-	if (variant->init)
-		variant->init(pdev);
+	if (variant->init) {
+		ret = variant->init(pdev);
+		if (ret) {
+			dev_err(dev, "error initializing variant: %d\n", ret);
+			return ret;
+		}
+	}
 
 	for (i = 0; i < variant->num_dai; i++) {
 		dai_id = variant->dai_driver[i].id;
@@ -594,46 +599,22 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
 		}
 	}
 
-	drvdata->ahbix_clk = devm_clk_get(dev, "ahbix-clk");
-	if (IS_ERR(drvdata->ahbix_clk)) {
-		dev_err(dev, "error getting ahbix-clk: %ld\n",
-			PTR_ERR(drvdata->ahbix_clk));
-		return PTR_ERR(drvdata->ahbix_clk);
-	}
-
-	ret = clk_set_rate(drvdata->ahbix_clk, LPASS_AHBIX_CLOCK_FREQUENCY);
-	if (ret) {
-		dev_err(dev, "error setting rate on ahbix_clk: %d\n", ret);
-		return ret;
-	}
-	dev_dbg(dev, "set ahbix_clk rate to %lu\n",
-		clk_get_rate(drvdata->ahbix_clk));
-
-	ret = clk_prepare_enable(drvdata->ahbix_clk);
-	if (ret) {
-		dev_err(dev, "error enabling ahbix_clk: %d\n", ret);
-		return ret;
-	}
-
 	ret = devm_snd_soc_register_component(dev,
 					      &lpass_cpu_comp_driver,
 					      variant->dai_driver,
 					      variant->num_dai);
 	if (ret) {
 		dev_err(dev, "error registering cpu driver: %d\n", ret);
-		goto err_clk;
+		goto err;
 	}
 
 	ret = asoc_qcom_lpass_platform_register(pdev);
 	if (ret) {
 		dev_err(dev, "error registering platform driver: %d\n", ret);
-		goto err_clk;
+		goto err;
 	}
 
-	return 0;
-
-err_clk:
-	clk_disable_unprepare(drvdata->ahbix_clk);
+err:
 	return ret;
 }
 EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_platform_probe);
@@ -645,7 +626,6 @@ int asoc_qcom_lpass_cpu_platform_remove(struct platform_device *pdev)
 	if (drvdata->variant->exit)
 		drvdata->variant->exit(pdev);
 
-	clk_disable_unprepare(drvdata->ahbix_clk);
 
 	return 0;
 }
diff --git a/sound/soc/qcom/lpass-ipq806x.c b/sound/soc/qcom/lpass-ipq806x.c
index 1987605..b7c0586 100644
--- a/sound/soc/qcom/lpass-ipq806x.c
+++ b/sound/soc/qcom/lpass-ipq806x.c
@@ -55,6 +55,47 @@ static struct snd_soc_dai_driver ipq806x_lpass_cpu_dai_driver = {
 	.ops    = &asoc_qcom_lpass_cpu_dai_ops,
 };
 
+static int ipq806x_lpass_init(struct platform_device *pdev)
+{
+	struct lpass_data *drvdata = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	drvdata->ahbix_clk = devm_clk_get(dev, "ahbix-clk");
+	if (IS_ERR(drvdata->ahbix_clk)) {
+		dev_err(dev, "error getting ahbix-clk: %ld\n",
+				PTR_ERR(drvdata->ahbix_clk));
+		ret = PTR_ERR(drvdata->ahbix_clk);
+		goto err_ahbix_clk;
+	}
+
+	ret = clk_set_rate(drvdata->ahbix_clk, LPASS_AHBIX_CLOCK_FREQUENCY);
+	if (ret) {
+		dev_err(dev, "error setting rate on ahbix_clk: %d\n", ret);
+		goto err_ahbix_clk;
+	}
+	dev_dbg(dev, "set ahbix_clk rate to %lu\n",
+			clk_get_rate(drvdata->ahbix_clk));
+
+	ret = clk_prepare_enable(drvdata->ahbix_clk);
+	if (ret) {
+		dev_err(dev, "error enabling ahbix_clk: %d\n", ret);
+		goto err_ahbix_clk;
+	}
+
+err_ahbix_clk:
+	return ret;
+}
+
+static int ipq806x_lpass_exit(struct platform_device *pdev)
+{
+	struct lpass_data *drvdata = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(drvdata->ahbix_clk);
+
+	return 0;
+}
+
 static int ipq806x_lpass_alloc_dma_channel(struct lpass_data *drvdata, int dir)
 {
 	if (dir == SNDRV_PCM_STREAM_PLAYBACK)
@@ -90,6 +131,8 @@ static struct lpass_variant ipq806x_data = {
 	.dai_bit_clk_names	= (const char *[]) {
 				"mi2s-bit-clk",
 				},
+	.init			= ipq806x_lpass_init,
+	.exit			= ipq806x_lpass_exit,
 	.alloc_dma_channel	= ipq806x_lpass_alloc_dma_channel,
 	.free_dma_channel	= ipq806x_lpass_free_dma_channel,
 };
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH v5 03/12] ASoC: qcom: lpass-platform: Replace card->dev with component->dev

[Rohit kumar]

From: Ajit Pandey <ajitp@codeaurora.org>

We are allocating dma memory for component->dev but trying to mmap
such memory for substream->pcm->card->dev. Replace device argument
in mmap with component->dev to fix this.

Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/lpass-platform.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
index 01179bc..3697f4e 100644
--- a/sound/soc/qcom/lpass-platform.c
+++ b/sound/soc/qcom/lpass-platform.c
@@ -400,9 +400,8 @@ static int lpass_platform_pcmops_mmap(struct snd_soc_component *component,
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 
-	return dma_mmap_coherent(substream->pcm->card->dev, vma,
-			runtime->dma_area, runtime->dma_addr,
-			runtime->dma_bytes);
+	return dma_mmap_coherent(component->dev, vma, runtime->dma_area,
+				 runtime->dma_addr, runtime->dma_bytes);
 }
 
 static irqreturn_t lpass_dma_interrupt_handler(
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH v5 04/12] ASoC: qcom: lpass-platform: fix memory leak

[Rohit kumar]

lpass_pcm_data is never freed. Free it in close
ops to avoid memory leak.

Fixes: 022d00ee0b55 ("ASoC: lpass-platform: Fix broken pcm data usage")
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/lpass-platform.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
index 3697f4e..315feda 100644
--- a/sound/soc/qcom/lpass-platform.c
+++ b/sound/soc/qcom/lpass-platform.c
@@ -61,7 +61,7 @@ static int lpass_platform_pcmops_open(struct snd_soc_component *component,
 	int ret, dma_ch, dir = substream->stream;
 	struct lpass_pcm_data *data;
 
-	data = devm_kzalloc(soc_runtime->dev, sizeof(*data), GFP_KERNEL);
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
@@ -118,6 +118,7 @@ static int lpass_platform_pcmops_close(struct snd_soc_component *component,
 	if (v->free_dma_channel)
 		v->free_dma_channel(drvdata, data->dma_ch);
 
+	kfree(data);
 	return 0;
 }
 
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH v5 05/12] ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers

[Rohit kumar]

I2SCTL and DMACTL registers has different bits alignment for newer
LPASS variants of SC7180 soc. Use REG_FIELD_ID() to define the
reg_fields in platform specific file and removed shifts and mask
macros for such registers from header file.

Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
---
 sound/soc/qcom/lpass-apq8016.c   |  24 ++++++
 sound/soc/qcom/lpass-cpu.c       | 156 ++++++++++++++++++++++++++------------
 sound/soc/qcom/lpass-ipq806x.c   |  24 ++++++
 sound/soc/qcom/lpass-lpaif-reg.h | 157 +++++++++++++++++++++------------------
 sound/soc/qcom/lpass-platform.c  | 145 ++++++++++++++++++++++++++++--------
 sound/soc/qcom/lpass.h           |  53 +++++++++++++
 6 files changed, 407 insertions(+), 152 deletions(-)

diff --git a/sound/soc/qcom/lpass-apq8016.c b/sound/soc/qcom/lpass-apq8016.c
index fe4c258..dd9e3dd 100644
--- a/sound/soc/qcom/lpass-apq8016.c
+++ b/sound/soc/qcom/lpass-apq8016.c
@@ -240,6 +240,30 @@ static struct lpass_variant apq8016_data = {
 	.wrdma_reg_stride	= 0x1000,
 	.wrdma_channel_start	= 5,
 	.wrdma_channels		= 2,
+	.loopback		= REG_FIELD_ID(0x1000, 15, 15, 4, 0x1000),
+	.spken			= REG_FIELD_ID(0x1000, 14, 14, 4, 0x1000),
+	.spkmode		= REG_FIELD_ID(0x1000, 10, 13, 4, 0x1000),
+	.spkmono		= REG_FIELD_ID(0x1000, 9, 9, 4, 0x1000),
+	.micen			= REG_FIELD_ID(0x1000, 8, 8, 4, 0x1000),
+	.micmode		= REG_FIELD_ID(0x1000, 4, 7, 4, 0x1000),
+	.micmono		= REG_FIELD_ID(0x1000, 3, 3, 4, 0x1000),
+	.wssrc			= REG_FIELD_ID(0x1000, 2, 2, 4, 0x1000),
+	.bitwidth		= REG_FIELD_ID(0x1000, 0, 0, 4, 0x1000),
+
+	.rdma_dyncclk		= REG_FIELD_ID(0x8400, 12, 12, 2, 0x1000),
+	.rdma_bursten		= REG_FIELD_ID(0x8400, 11, 11, 2, 0x1000),
+	.rdma_wpscnt		= REG_FIELD_ID(0x8400, 8, 10, 2, 0x1000),
+	.rdma_intf		= REG_FIELD_ID(0x8400, 4, 7, 2, 0x1000),
+	.rdma_fifowm		= REG_FIELD_ID(0x8400, 1, 3, 2, 0x1000),
+	.rdma_enable		= REG_FIELD_ID(0x8400, 0, 0, 2, 0x1000),
+
+	.wrdma_dyncclk		= REG_FIELD_ID(0xB000, 12, 12, 2, 0x1000),
+	.wrdma_bursten		= REG_FIELD_ID(0xB000, 11, 11, 2, 0x1000),
+	.wrdma_wpscnt		= REG_FIELD_ID(0xB000, 8, 10, 2, 0x1000),
+	.wrdma_intf		= REG_FIELD_ID(0xB000, 4, 7, 2, 0x1000),
+	.wrdma_fifowm		= REG_FIELD_ID(0xB000, 1, 3, 2, 0x1000),
+	.wrdma_enable		= REG_FIELD_ID(0xB000, 0, 0, 2, 0x1000),
+
 	.clk_name		= (const char*[]) {
 				   "pcnoc-mport-clk",
 				   "pcnoc-sway-clk",
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index f0c7e93..6b86f16 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -29,6 +29,32 @@
 #define LPASS_CPU_I2S_SD0_1_2_MASK	GENMASK(2, 0)
 #define LPASS_CPU_I2S_SD0_1_2_3_MASK	GENMASK(3, 0)
 
+static int lpass_cpu_init_i2sctl_bitfields(struct device *dev,
+			struct lpaif_i2sctl *i2sctl, struct regmap *map)
+{
+	struct lpass_data *drvdata = dev_get_drvdata(dev);
+	struct lpass_variant *v = drvdata->variant;
+
+	i2sctl->loopback = devm_regmap_field_alloc(dev, map, v->loopback);
+	i2sctl->spken = devm_regmap_field_alloc(dev, map, v->spken);
+	i2sctl->spkmode = devm_regmap_field_alloc(dev, map, v->spkmode);
+	i2sctl->spkmono = devm_regmap_field_alloc(dev, map, v->spkmono);
+	i2sctl->micen = devm_regmap_field_alloc(dev, map, v->micen);
+	i2sctl->micmode = devm_regmap_field_alloc(dev, map, v->micmode);
+	i2sctl->micmono = devm_regmap_field_alloc(dev, map, v->micmono);
+	i2sctl->wssrc = devm_regmap_field_alloc(dev, map, v->wssrc);
+	i2sctl->bitwidth = devm_regmap_field_alloc(dev, map, v->bitwidth);
+
+	if (IS_ERR(i2sctl->loopback) || IS_ERR(i2sctl->spken) ||
+	    IS_ERR(i2sctl->spkmode) || IS_ERR(i2sctl->spkmono) ||
+	    IS_ERR(i2sctl->micen) || IS_ERR(i2sctl->micmode) ||
+	    IS_ERR(i2sctl->micmono) || IS_ERR(i2sctl->wssrc) ||
+	    IS_ERR(i2sctl->bitwidth))
+		return -EINVAL;
+
+	return 0;
+}
+
 static int lpass_cpu_daiops_set_sysclk(struct snd_soc_dai *dai, int clk_id,
 		unsigned int freq, int dir)
 {
@@ -79,6 +105,8 @@ static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream,
 		struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
 {
 	struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
+	struct lpaif_i2sctl *i2sctl = drvdata->i2sctl;
+	unsigned int id = dai->driver->id;
 	snd_pcm_format_t format = params_format(params);
 	unsigned int channels = params_channels(params);
 	unsigned int rate = params_rate(params);
@@ -92,28 +120,45 @@ static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream,
 		return bitwidth;
 	}
 
-	regval = LPAIF_I2SCTL_LOOPBACK_DISABLE |
-			LPAIF_I2SCTL_WSSRC_INTERNAL;
+	ret = regmap_fields_write(i2sctl->loopback, id,
+				 LPAIF_I2SCTL_LOOPBACK_DISABLE);
+	if (ret) {
+		dev_err(dai->dev, "error updating loopback field: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_fields_write(i2sctl->wssrc, id,
+				 LPAIF_I2SCTL_WSSRC_INTERNAL);
+	if (ret) {
+		dev_err(dai->dev, "error updating wssrc field: %d\n", ret);
+		return ret;
+	}
 
 	switch (bitwidth) {
 	case 16:
-		regval |= LPAIF_I2SCTL_BITWIDTH_16;
+		regval = LPAIF_I2SCTL_BITWIDTH_16;
 		break;
 	case 24:
-		regval |= LPAIF_I2SCTL_BITWIDTH_24;
+		regval = LPAIF_I2SCTL_BITWIDTH_24;
 		break;
 	case 32:
-		regval |= LPAIF_I2SCTL_BITWIDTH_32;
+		regval = LPAIF_I2SCTL_BITWIDTH_32;
 		break;
 	default:
 		dev_err(dai->dev, "invalid bitwidth given: %d\n", bitwidth);
 		return -EINVAL;
 	}
 
+	ret = regmap_fields_write(i2sctl->bitwidth, id, regval);
+	if (ret) {
+		dev_err(dai->dev, "error updating bitwidth field: %d\n", ret);
+		return ret;
+	}
+
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		mode = drvdata->mi2s_playback_sd_mode[dai->driver->id];
+		mode = drvdata->mi2s_playback_sd_mode[id];
 	else
-		mode = drvdata->mi2s_capture_sd_mode[dai->driver->id];
+		mode = drvdata->mi2s_capture_sd_mode[id];
 
 	if (!mode) {
 		dev_err(dai->dev, "no line is assigned\n");
@@ -175,30 +220,42 @@ static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		regval |= LPAIF_I2SCTL_SPKMODE(mode);
-
+		ret = regmap_fields_write(i2sctl->spkmode, id,
+					 LPAIF_I2SCTL_SPKMODE(mode));
+		if (ret) {
+			dev_err(dai->dev, "error writing to i2sctl spkr mode: %d\n",
+				ret);
+			return ret;
+		}
 		if (channels >= 2)
-			regval |= LPAIF_I2SCTL_SPKMONO_STEREO;
+			ret = regmap_fields_write(i2sctl->spkmono, id,
+						 LPAIF_I2SCTL_SPKMONO_STEREO);
 		else
-			regval |= LPAIF_I2SCTL_SPKMONO_MONO;
+			ret = regmap_fields_write(i2sctl->spkmono, id,
+						 LPAIF_I2SCTL_SPKMONO_MONO);
 	} else {
-		regval |= LPAIF_I2SCTL_MICMODE(mode);
-
+		ret = regmap_fields_write(i2sctl->micmode, id,
+					 LPAIF_I2SCTL_MICMODE(mode));
+		if (ret) {
+			dev_err(dai->dev, "error writing to i2sctl mic mode: %d\n",
+				ret);
+			return ret;
+		}
 		if (channels >= 2)
-			regval |= LPAIF_I2SCTL_MICMONO_STEREO;
+			ret = regmap_fields_write(i2sctl->micmono, id,
+						 LPAIF_I2SCTL_MICMONO_STEREO);
 		else
-			regval |= LPAIF_I2SCTL_MICMONO_MONO;
+			ret = regmap_fields_write(i2sctl->micmono, id,
+						 LPAIF_I2SCTL_MICMONO_MONO);
 	}
 
-	ret = regmap_write(drvdata->lpaif_map,
-			   LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
-			   regval);
 	if (ret) {
-		dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret);
+		dev_err(dai->dev, "error writing to i2sctl channels mode: %d\n",
+			ret);
 		return ret;
 	}
 
-	ret = clk_set_rate(drvdata->mi2s_bit_clk[dai->driver->id],
+	ret = clk_set_rate(drvdata->mi2s_bit_clk[id],
 			   rate * bitwidth * 2);
 	if (ret) {
 		dev_err(dai->dev, "error setting mi2s bitclk to %u: %d\n",
@@ -228,22 +285,20 @@ static int lpass_cpu_daiops_prepare(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {
 	struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
+	struct lpaif_i2sctl *i2sctl = drvdata->i2sctl;
+	unsigned int id = dai->driver->id;
 	int ret;
-	unsigned int val, mask;
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		val = LPAIF_I2SCTL_SPKEN_ENABLE;
-		mask = LPAIF_I2SCTL_SPKEN_MASK;
-	} else  {
-		val = LPAIF_I2SCTL_MICEN_ENABLE;
-		mask = LPAIF_I2SCTL_MICEN_MASK;
+		ret = regmap_fields_write(i2sctl->spken, id,
+					 LPAIF_I2SCTL_SPKEN_ENABLE);
+	} else {
+		ret = regmap_fields_write(i2sctl->micen, id,
+					 LPAIF_I2SCTL_MICEN_ENABLE);
 	}
 
-	ret = regmap_update_bits(drvdata->lpaif_map,
-			LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
-			mask, val);
 	if (ret)
-		dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret);
+		dev_err(dai->dev, "error writing to i2sctl enable: %d\n", ret);
 
 	return ret;
 }
@@ -252,25 +307,21 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
 		int cmd, struct snd_soc_dai *dai)
 {
 	struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
+	struct lpaif_i2sctl *i2sctl = drvdata->i2sctl;
+	unsigned int id = dai->driver->id;
 	int ret = -EINVAL;
-	unsigned int val, mask;
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-			val = LPAIF_I2SCTL_SPKEN_ENABLE;
-			mask = LPAIF_I2SCTL_SPKEN_MASK;
+			ret = regmap_fields_write(i2sctl->spken, id,
+						 LPAIF_I2SCTL_SPKEN_ENABLE);
 		} else  {
-			val = LPAIF_I2SCTL_MICEN_ENABLE;
-			mask = LPAIF_I2SCTL_MICEN_MASK;
+			ret = regmap_fields_write(i2sctl->micen, id,
+						 LPAIF_I2SCTL_MICEN_ENABLE);
 		}
-
-		ret = regmap_update_bits(drvdata->lpaif_map,
-				LPAIF_I2SCTL_REG(drvdata->variant,
-						dai->driver->id),
-				mask, val);
 		if (ret)
 			dev_err(dai->dev, "error writing to i2sctl reg: %d\n",
 				ret);
@@ -279,17 +330,12 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-			val = LPAIF_I2SCTL_SPKEN_DISABLE;
-			mask = LPAIF_I2SCTL_SPKEN_MASK;
+			ret = regmap_fields_write(i2sctl->spken, id,
+						 LPAIF_I2SCTL_SPKEN_DISABLE);
 		} else  {
-			val = LPAIF_I2SCTL_MICEN_DISABLE;
-			mask = LPAIF_I2SCTL_MICEN_MASK;
+			ret = regmap_fields_write(i2sctl->micen, id,
+						 LPAIF_I2SCTL_MICEN_DISABLE);
 		}
-
-		ret = regmap_update_bits(drvdata->lpaif_map,
-				LPAIF_I2SCTL_REG(drvdata->variant,
-						dai->driver->id),
-				mask, val);
 		if (ret)
 			dev_err(dai->dev, "error writing to i2sctl reg: %d\n",
 				ret);
@@ -599,6 +645,18 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
 		}
 	}
 
+	/* Allocation for i2sctl regmap fields */
+	drvdata->i2sctl = devm_kzalloc(&pdev->dev, sizeof(struct lpaif_i2sctl),
+					GFP_KERNEL);
+
+	/* Initialize bitfields for dai I2SCTL register */
+	ret = lpass_cpu_init_i2sctl_bitfields(dev, drvdata->i2sctl,
+						drvdata->lpaif_map);
+	if (ret) {
+		dev_err(dev, "error init i2sctl field: %d\n", ret);
+		return ret;
+	}
+
 	ret = devm_snd_soc_register_component(dev,
 					      &lpass_cpu_comp_driver,
 					      variant->dai_driver,
diff --git a/sound/soc/qcom/lpass-ipq806x.c b/sound/soc/qcom/lpass-ipq806x.c
index b7c0586..72f09b3 100644
--- a/sound/soc/qcom/lpass-ipq806x.c
+++ b/sound/soc/qcom/lpass-ipq806x.c
@@ -123,6 +123,30 @@ static struct lpass_variant ipq806x_data = {
 	.wrdma_reg_stride	= 0x1000,
 	.wrdma_channel_start	= 5,
 	.wrdma_channels		= 4,
+	.loopback		= REG_FIELD_ID(0x0010, 15, 15, 5, 0x4),
+	.spken			= REG_FIELD_ID(0x0010, 14, 14, 5, 0x4),
+	.spkmode		= REG_FIELD_ID(0x0010, 10, 13, 5, 0x4),
+	.spkmono		= REG_FIELD_ID(0x0010, 9, 9, 5, 0x4),
+	.micen			= REG_FIELD_ID(0x0010, 8, 8, 5, 0x4),
+	.micmode		= REG_FIELD_ID(0x0010, 4, 7, 5, 0x4),
+	.micmono		= REG_FIELD_ID(0x0010, 3, 3, 5, 0x4),
+	.wssrc			= REG_FIELD_ID(0x0010, 2, 2, 5, 0x4),
+	.bitwidth		= REG_FIELD_ID(0x0010, 0, 0, 5, 0x4),
+
+	.rdma_dyncclk		= REG_FIELD_ID(0x6000, 12, 12, 4, 0x1000),
+	.rdma_bursten		= REG_FIELD_ID(0x6000, 11, 11, 4, 0x1000),
+	.rdma_wpscnt		= REG_FIELD_ID(0x6000, 8, 10, 4, 0x1000),
+	.rdma_intf		= REG_FIELD_ID(0x6000, 4, 7, 4, 0x1000),
+	.rdma_fifowm		= REG_FIELD_ID(0x6000, 1, 3, 4, 0x1000),
+	.rdma_enable		= REG_FIELD_ID(0x6000, 0, 0, 4, 0x1000),
+
+	.wrdma_dyncclk		= REG_FIELD_ID(0xB000, 12, 12, 4, 0x1000),
+	.wrdma_bursten		= REG_FIELD_ID(0xB000, 11, 11, 4, 0x1000),
+	.wrdma_wpscnt		= REG_FIELD_ID(0xB000, 8, 10, 4, 0x1000),
+	.wrdma_intf		= REG_FIELD_ID(0xB000, 4, 7, 4, 0x1000),
+	.wrdma_fifowm		= REG_FIELD_ID(0xB000, 1, 3, 4, 0x1000),
+	.wrdma_enable		= REG_FIELD_ID(0xB000, 0, 0, 4, 0x1000),
+
 	.dai_driver		= &ipq806x_lpass_cpu_dai_driver,
 	.num_dai		= 1,
 	.dai_osr_clk_names	= (const char *[]) {
diff --git a/sound/soc/qcom/lpass-lpaif-reg.h b/sound/soc/qcom/lpass-lpaif-reg.h
index 72a3e2f..5258e60 100644
--- a/sound/soc/qcom/lpass-lpaif-reg.h
+++ b/sound/soc/qcom/lpass-lpaif-reg.h
@@ -12,15 +12,12 @@
 	(v->i2sctrl_reg_base + (addr) + v->i2sctrl_reg_stride * (port))
 
 #define LPAIF_I2SCTL_REG(v, port)	LPAIF_I2SCTL_REG_ADDR(v, 0x0, (port))
-#define LPAIF_I2SCTL_LOOPBACK_MASK	0x8000
-#define LPAIF_I2SCTL_LOOPBACK_SHIFT	15
-#define LPAIF_I2SCTL_LOOPBACK_DISABLE	(0 << LPAIF_I2SCTL_LOOPBACK_SHIFT)
-#define LPAIF_I2SCTL_LOOPBACK_ENABLE	(1 << LPAIF_I2SCTL_LOOPBACK_SHIFT)
 
-#define LPAIF_I2SCTL_SPKEN_MASK		0x4000
-#define LPAIF_I2SCTL_SPKEN_SHIFT	14
-#define LPAIF_I2SCTL_SPKEN_DISABLE	(0 << LPAIF_I2SCTL_SPKEN_SHIFT)
-#define LPAIF_I2SCTL_SPKEN_ENABLE	(1 << LPAIF_I2SCTL_SPKEN_SHIFT)
+#define LPAIF_I2SCTL_LOOPBACK_DISABLE	0
+#define LPAIF_I2SCTL_LOOPBACK_ENABLE	1
+
+#define LPAIF_I2SCTL_SPKEN_DISABLE	0
+#define LPAIF_I2SCTL_SPKEN_ENABLE	1
 
 #define LPAIF_I2SCTL_MODE_NONE		0
 #define LPAIF_I2SCTL_MODE_SD0		1
@@ -31,40 +28,37 @@
 #define LPAIF_I2SCTL_MODE_QUAD23	6
 #define LPAIF_I2SCTL_MODE_6CH		7
 #define LPAIF_I2SCTL_MODE_8CH		8
+#define LPAIF_I2SCTL_MODE_10CH		9
+#define LPAIF_I2SCTL_MODE_12CH		10
+#define LPAIF_I2SCTL_MODE_14CH		11
+#define LPAIF_I2SCTL_MODE_16CH		12
+#define LPAIF_I2SCTL_MODE_SD4		13
+#define LPAIF_I2SCTL_MODE_SD5		14
+#define LPAIF_I2SCTL_MODE_SD6		15
+#define LPAIF_I2SCTL_MODE_SD7		16
+#define LPAIF_I2SCTL_MODE_QUAD45	17
+#define LPAIF_I2SCTL_MODE_QUAD47	18
+#define LPAIF_I2SCTL_MODE_8CH_2		19
 
-#define LPAIF_I2SCTL_SPKMODE_MASK	0x3C00
-#define LPAIF_I2SCTL_SPKMODE_SHIFT	10
-#define LPAIF_I2SCTL_SPKMODE(mode)	((mode) << LPAIF_I2SCTL_SPKMODE_SHIFT)
+#define LPAIF_I2SCTL_SPKMODE(mode)	mode
 
-#define LPAIF_I2SCTL_SPKMONO_MASK	0x0200
-#define LPAIF_I2SCTL_SPKMONO_SHIFT	9
-#define LPAIF_I2SCTL_SPKMONO_STEREO	(0 << LPAIF_I2SCTL_SPKMONO_SHIFT)
-#define LPAIF_I2SCTL_SPKMONO_MONO	(1 << LPAIF_I2SCTL_SPKMONO_SHIFT)
+#define LPAIF_I2SCTL_SPKMONO_STEREO	0
+#define LPAIF_I2SCTL_SPKMONO_MONO	1
 
-#define LPAIF_I2SCTL_MICEN_MASK		GENMASK(8, 8)
-#define LPAIF_I2SCTL_MICEN_SHIFT	8
-#define LPAIF_I2SCTL_MICEN_DISABLE	(0 << LPAIF_I2SCTL_MICEN_SHIFT)
-#define LPAIF_I2SCTL_MICEN_ENABLE	(1 << LPAIF_I2SCTL_MICEN_SHIFT)
+#define LPAIF_I2SCTL_MICEN_DISABLE	0
+#define LPAIF_I2SCTL_MICEN_ENABLE	1
 
-#define LPAIF_I2SCTL_MICMODE_MASK	GENMASK(7, 4)
-#define LPAIF_I2SCTL_MICMODE_SHIFT	4
-#define LPAIF_I2SCTL_MICMODE(mode)	((mode) << LPAIF_I2SCTL_MICMODE_SHIFT)
+#define LPAIF_I2SCTL_MICMODE(mode)	mode
 
-#define LPAIF_I2SCTL_MIMONO_MASK	GENMASK(3, 3)
-#define LPAIF_I2SCTL_MICMONO_SHIFT	3
-#define LPAIF_I2SCTL_MICMONO_STEREO	(0 << LPAIF_I2SCTL_MICMONO_SHIFT)
-#define LPAIF_I2SCTL_MICMONO_MONO	(1 << LPAIF_I2SCTL_MICMONO_SHIFT)
+#define LPAIF_I2SCTL_MICMONO_STEREO	0
+#define LPAIF_I2SCTL_MICMONO_MONO	1
 
-#define LPAIF_I2SCTL_WSSRC_MASK		0x0004
-#define LPAIF_I2SCTL_WSSRC_SHIFT	2
-#define LPAIF_I2SCTL_WSSRC_INTERNAL	(0 << LPAIF_I2SCTL_WSSRC_SHIFT)
-#define LPAIF_I2SCTL_WSSRC_EXTERNAL	(1 << LPAIF_I2SCTL_WSSRC_SHIFT)
+#define LPAIF_I2SCTL_WSSRC_INTERNAL	0
+#define LPAIF_I2SCTL_WSSRC_EXTERNAL	1
 
-#define LPAIF_I2SCTL_BITWIDTH_MASK	0x0003
-#define LPAIF_I2SCTL_BITWIDTH_SHIFT	0
-#define LPAIF_I2SCTL_BITWIDTH_16	(0 << LPAIF_I2SCTL_BITWIDTH_SHIFT)
-#define LPAIF_I2SCTL_BITWIDTH_24	(1 << LPAIF_I2SCTL_BITWIDTH_SHIFT)
-#define LPAIF_I2SCTL_BITWIDTH_32	(2 << LPAIF_I2SCTL_BITWIDTH_SHIFT)
+#define LPAIF_I2SCTL_BITWIDTH_16	0
+#define LPAIF_I2SCTL_BITWIDTH_24	1
+#define LPAIF_I2SCTL_BITWIDTH_32	2
 
 /* LPAIF IRQ */
 #define LPAIF_IRQ_REG_ADDR(v, addr, port) \
@@ -121,42 +115,59 @@
 #define	LPAIF_DMAPER_REG(v, chan, dir) __LPAIF_DMA_REG(v, chan, dir, PER)
 #define	LPAIF_DMAPERCNT_REG(v, chan, dir) __LPAIF_DMA_REG(v, chan, dir, PERCNT)
 
-#define LPAIF_DMACTL_BURSTEN_MASK	0x800
-#define LPAIF_DMACTL_BURSTEN_SHIFT	11
-#define LPAIF_DMACTL_BURSTEN_SINGLE	(0 << LPAIF_DMACTL_BURSTEN_SHIFT)
-#define LPAIF_DMACTL_BURSTEN_INCR4	(1 << LPAIF_DMACTL_BURSTEN_SHIFT)
-
-#define LPAIF_DMACTL_WPSCNT_MASK	0x700
-#define LPAIF_DMACTL_WPSCNT_SHIFT	8
-#define LPAIF_DMACTL_WPSCNT_ONE	(0 << LPAIF_DMACTL_WPSCNT_SHIFT)
-#define LPAIF_DMACTL_WPSCNT_TWO	(1 << LPAIF_DMACTL_WPSCNT_SHIFT)
-#define LPAIF_DMACTL_WPSCNT_THREE	(2 << LPAIF_DMACTL_WPSCNT_SHIFT)
-#define LPAIF_DMACTL_WPSCNT_FOUR	(3 << LPAIF_DMACTL_WPSCNT_SHIFT)
-#define LPAIF_DMACTL_WPSCNT_SIX	(5 << LPAIF_DMACTL_WPSCNT_SHIFT)
-#define LPAIF_DMACTL_WPSCNT_EIGHT	(7 << LPAIF_DMACTL_WPSCNT_SHIFT)
-
-#define LPAIF_DMACTL_AUDINTF_MASK	0x0F0
-#define LPAIF_DMACTL_AUDINTF_SHIFT	4
-#define LPAIF_DMACTL_AUDINTF(id)	(id << LPAIF_DMACTL_AUDINTF_SHIFT)
-
-#define LPAIF_DMACTL_FIFOWM_MASK	0x00E
-#define LPAIF_DMACTL_FIFOWM_SHIFT	1
-#define LPAIF_DMACTL_FIFOWM_1		(0 << LPAIF_DMACTL_FIFOWM_SHIFT)
-#define LPAIF_DMACTL_FIFOWM_2		(1 << LPAIF_DMACTL_FIFOWM_SHIFT)
-#define LPAIF_DMACTL_FIFOWM_3		(2 << LPAIF_DMACTL_FIFOWM_SHIFT)
-#define LPAIF_DMACTL_FIFOWM_4		(3 << LPAIF_DMACTL_FIFOWM_SHIFT)
-#define LPAIF_DMACTL_FIFOWM_5		(4 << LPAIF_DMACTL_FIFOWM_SHIFT)
-#define LPAIF_DMACTL_FIFOWM_6		(5 << LPAIF_DMACTL_FIFOWM_SHIFT)
-#define LPAIF_DMACTL_FIFOWM_7		(6 << LPAIF_DMACTL_FIFOWM_SHIFT)
-#define LPAIF_DMACTL_FIFOWM_8		(7 << LPAIF_DMACTL_FIFOWM_SHIFT)
-
-#define LPAIF_DMACTL_ENABLE_MASK	0x1
-#define LPAIF_DMACTL_ENABLE_SHIFT	0
-#define LPAIF_DMACTL_ENABLE_OFF	(0 << LPAIF_DMACTL_ENABLE_SHIFT)
-#define LPAIF_DMACTL_ENABLE_ON		(1 << LPAIF_DMACTL_ENABLE_SHIFT)
-
-#define LPAIF_DMACTL_DYNCLK_MASK	BIT(12)
-#define LPAIF_DMACTL_DYNCLK_SHIFT	12
-#define LPAIF_DMACTL_DYNCLK_OFF	(0 << LPAIF_DMACTL_DYNCLK_SHIFT)
-#define LPAIF_DMACTL_DYNCLK_ON		(1 << LPAIF_DMACTL_DYNCLK_SHIFT)
+#define LPAIF_DMACTL_BURSTEN_SINGLE	0
+#define LPAIF_DMACTL_BURSTEN_INCR4	1
+
+#define LPAIF_DMACTL_WPSCNT_ONE		0
+#define LPAIF_DMACTL_WPSCNT_TWO		1
+#define LPAIF_DMACTL_WPSCNT_THREE	2
+#define LPAIF_DMACTL_WPSCNT_FOUR	3
+#define LPAIF_DMACTL_WPSCNT_SIX		5
+#define LPAIF_DMACTL_WPSCNT_EIGHT	7
+#define LPAIF_DMACTL_WPSCNT_TEN		9
+#define LPAIF_DMACTL_WPSCNT_TWELVE	11
+#define LPAIF_DMACTL_WPSCNT_FOURTEEN	13
+#define LPAIF_DMACTL_WPSCNT_SIXTEEN	15
+
+#define LPAIF_DMACTL_AUDINTF(id)	id
+
+#define LPAIF_DMACTL_FIFOWM_1		0
+#define LPAIF_DMACTL_FIFOWM_2		1
+#define LPAIF_DMACTL_FIFOWM_3		2
+#define LPAIF_DMACTL_FIFOWM_4		3
+#define LPAIF_DMACTL_FIFOWM_5		4
+#define LPAIF_DMACTL_FIFOWM_6		5
+#define LPAIF_DMACTL_FIFOWM_7		6
+#define LPAIF_DMACTL_FIFOWM_8		7
+#define LPAIF_DMACTL_FIFOWM_9		8
+#define LPAIF_DMACTL_FIFOWM_10		9
+#define LPAIF_DMACTL_FIFOWM_11		10
+#define LPAIF_DMACTL_FIFOWM_12		11
+#define LPAIF_DMACTL_FIFOWM_13		12
+#define LPAIF_DMACTL_FIFOWM_14		13
+#define LPAIF_DMACTL_FIFOWM_15		14
+#define LPAIF_DMACTL_FIFOWM_16		15
+#define LPAIF_DMACTL_FIFOWM_17		16
+#define LPAIF_DMACTL_FIFOWM_18		17
+#define LPAIF_DMACTL_FIFOWM_19		18
+#define LPAIF_DMACTL_FIFOWM_20		19
+#define LPAIF_DMACTL_FIFOWM_21		20
+#define LPAIF_DMACTL_FIFOWM_22		21
+#define LPAIF_DMACTL_FIFOWM_23		22
+#define LPAIF_DMACTL_FIFOWM_24		23
+#define LPAIF_DMACTL_FIFOWM_25		24
+#define LPAIF_DMACTL_FIFOWM_26		25
+#define LPAIF_DMACTL_FIFOWM_27		26
+#define LPAIF_DMACTL_FIFOWM_28		27
+#define LPAIF_DMACTL_FIFOWM_29		28
+#define LPAIF_DMACTL_FIFOWM_30		29
+#define LPAIF_DMACTL_FIFOWM_31		30
+#define LPAIF_DMACTL_FIFOWM_32		31
+
+#define LPAIF_DMACTL_ENABLE_OFF		0
+#define LPAIF_DMACTL_ENABLE_ON		1
+
+#define LPAIF_DMACTL_DYNCLK_OFF		0
+#define LPAIF_DMACTL_DYNCLK_ON		1
+
 #endif /* __LPASS_LPAIF_REG_H__ */
diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
index 315feda..35aead1 100644
--- a/sound/soc/qcom/lpass-platform.c
+++ b/sound/soc/qcom/lpass-platform.c
@@ -50,6 +50,53 @@ static const struct snd_pcm_hardware lpass_platform_pcm_hardware = {
 	.fifo_size		=	0,
 };
 
+static int lpass_platform_alloc_dmactl_fields(struct device *dev,
+					 struct regmap *map)
+{
+	struct lpass_data *drvdata = dev_get_drvdata(dev);
+	struct lpass_variant *v = drvdata->variant;
+	struct lpaif_dmactl *rd_dmactl, *wr_dmactl;
+
+	drvdata->rd_dmactl = devm_kzalloc(dev, sizeof(struct lpaif_dmactl),
+					  GFP_KERNEL);
+	if (drvdata->rd_dmactl == NULL)
+		return -ENOMEM;
+
+	drvdata->wr_dmactl = devm_kzalloc(dev, sizeof(struct lpaif_dmactl),
+					  GFP_KERNEL);
+	if (drvdata->wr_dmactl == NULL)
+		return -ENOMEM;
+
+	rd_dmactl = drvdata->rd_dmactl;
+	wr_dmactl = drvdata->wr_dmactl;
+
+	rd_dmactl->bursten = devm_regmap_field_alloc(dev, map, v->rdma_bursten);
+	rd_dmactl->wpscnt = devm_regmap_field_alloc(dev, map, v->rdma_wpscnt);
+	rd_dmactl->fifowm = devm_regmap_field_alloc(dev, map, v->rdma_fifowm);
+	rd_dmactl->intf = devm_regmap_field_alloc(dev, map, v->rdma_intf);
+	rd_dmactl->enable = devm_regmap_field_alloc(dev, map, v->rdma_enable);
+	rd_dmactl->dyncclk = devm_regmap_field_alloc(dev, map, v->rdma_dyncclk);
+
+	if (IS_ERR(rd_dmactl->bursten) || IS_ERR(rd_dmactl->wpscnt) ||
+	    IS_ERR(rd_dmactl->fifowm) || IS_ERR(rd_dmactl->intf) ||
+	    IS_ERR(rd_dmactl->enable) || IS_ERR(rd_dmactl->dyncclk))
+		return -EINVAL;
+
+	wr_dmactl->bursten = devm_regmap_field_alloc(dev, map, v->wrdma_bursten);
+	wr_dmactl->wpscnt = devm_regmap_field_alloc(dev, map, v->wrdma_wpscnt);
+	wr_dmactl->fifowm = devm_regmap_field_alloc(dev, map, v->wrdma_fifowm);
+	wr_dmactl->intf = devm_regmap_field_alloc(dev, map, v->wrdma_intf);
+	wr_dmactl->enable = devm_regmap_field_alloc(dev, map, v->wrdma_enable);
+	wr_dmactl->dyncclk = devm_regmap_field_alloc(dev, map, v->wrdma_dyncclk);
+
+	if (IS_ERR(wr_dmactl->bursten) || IS_ERR(wr_dmactl->wpscnt) ||
+	    IS_ERR(wr_dmactl->fifowm) || IS_ERR(wr_dmactl->intf) ||
+	    IS_ERR(wr_dmactl->enable) || IS_ERR(wr_dmactl->dyncclk))
+		return -EINVAL;
+
+	return 0;
+}
+
 static int lpass_platform_pcmops_open(struct snd_soc_component *component,
 				      struct snd_pcm_substream *substream)
 {
@@ -134,11 +181,18 @@ static int lpass_platform_pcmops_hw_params(struct snd_soc_component *component,
 	snd_pcm_format_t format = params_format(params);
 	unsigned int channels = params_channels(params);
 	unsigned int regval;
-	int ch, dir = substream->stream;
+	struct lpaif_dmactl *dmactl;
+	int id, dir = substream->stream;
 	int bitwidth;
 	int ret, dma_port = pcm_data->i2s_port + v->dmactl_audif_start;
 
-	ch = pcm_data->dma_ch;
+	if (dir ==  SNDRV_PCM_STREAM_PLAYBACK) {
+		dmactl = drvdata->rd_dmactl;
+		id = pcm_data->dma_ch;
+	} else {
+		dmactl = drvdata->wr_dmactl;
+		id = pcm_data->dma_ch - v->wrdma_channel_start;
+	}
 
 	bitwidth = snd_pcm_format_width(format);
 	if (bitwidth < 0) {
@@ -147,25 +201,39 @@ static int lpass_platform_pcmops_hw_params(struct snd_soc_component *component,
 		return bitwidth;
 	}
 
-	regval = LPAIF_DMACTL_BURSTEN_INCR4 |
-			LPAIF_DMACTL_AUDINTF(dma_port) |
-			LPAIF_DMACTL_FIFOWM_8;
+	ret = regmap_fields_write(dmactl->bursten, id, LPAIF_DMACTL_BURSTEN_INCR4);
+	if (ret) {
+		dev_err(soc_runtime->dev, "error updating bursten field: %d\n", ret);
+		return ret;
+	}
+
+	regmap_fields_write(dmactl->fifowm, id, LPAIF_DMACTL_FIFOWM_8);
+	if (ret) {
+		dev_err(soc_runtime->dev, "error updating fifowm field: %d\n", ret);
+		return ret;
+	}
+
+	regmap_fields_write(dmactl->intf, id, LPAIF_DMACTL_AUDINTF(dma_port));
+	if (ret) {
+		dev_err(soc_runtime->dev, "error updating audintf field: %d\n", ret);
+		return ret;
+	}
 
 	switch (bitwidth) {
 	case 16:
 		switch (channels) {
 		case 1:
 		case 2:
-			regval |= LPAIF_DMACTL_WPSCNT_ONE;
+			regval = LPAIF_DMACTL_WPSCNT_ONE;
 			break;
 		case 4:
-			regval |= LPAIF_DMACTL_WPSCNT_TWO;
+			regval = LPAIF_DMACTL_WPSCNT_TWO;
 			break;
 		case 6:
-			regval |= LPAIF_DMACTL_WPSCNT_THREE;
+			regval = LPAIF_DMACTL_WPSCNT_THREE;
 			break;
 		case 8:
-			regval |= LPAIF_DMACTL_WPSCNT_FOUR;
+			regval = LPAIF_DMACTL_WPSCNT_FOUR;
 			break;
 		default:
 			dev_err(soc_runtime->dev,
@@ -178,19 +246,19 @@ static int lpass_platform_pcmops_hw_params(struct snd_soc_component *component,
 	case 32:
 		switch (channels) {
 		case 1:
-			regval |= LPAIF_DMACTL_WPSCNT_ONE;
+			regval = LPAIF_DMACTL_WPSCNT_ONE;
 			break;
 		case 2:
-			regval |= LPAIF_DMACTL_WPSCNT_TWO;
+			regval = LPAIF_DMACTL_WPSCNT_TWO;
 			break;
 		case 4:
-			regval |= LPAIF_DMACTL_WPSCNT_FOUR;
+			regval = LPAIF_DMACTL_WPSCNT_FOUR;
 			break;
 		case 6:
-			regval |= LPAIF_DMACTL_WPSCNT_SIX;
+			regval = LPAIF_DMACTL_WPSCNT_SIX;
 			break;
 		case 8:
-			regval |= LPAIF_DMACTL_WPSCNT_EIGHT;
+			regval = LPAIF_DMACTL_WPSCNT_EIGHT;
 			break;
 		default:
 			dev_err(soc_runtime->dev,
@@ -205,10 +273,9 @@ static int lpass_platform_pcmops_hw_params(struct snd_soc_component *component,
 		return -EINVAL;
 	}
 
-	ret = regmap_write(drvdata->lpaif_map,
-			LPAIF_DMACTL_REG(v, ch, dir), regval);
+	ret = regmap_fields_write(dmactl->wpscnt, id, regval);
 	if (ret) {
-		dev_err(soc_runtime->dev, "error writing to rdmactl reg: %d\n",
+		dev_err(soc_runtime->dev, "error writing to dmactl reg: %d\n",
 			ret);
 		return ret;
 	}
@@ -245,9 +312,17 @@ static int lpass_platform_pcmops_prepare(struct snd_soc_component *component,
 	struct snd_pcm_runtime *rt = substream->runtime;
 	struct lpass_pcm_data *pcm_data = rt->private_data;
 	struct lpass_variant *v = drvdata->variant;
-	int ret, ch, dir = substream->stream;
+	struct lpaif_dmactl *dmactl;
+	int ret, id, ch, dir = substream->stream;
 
 	ch = pcm_data->dma_ch;
+	if (dir ==  SNDRV_PCM_STREAM_PLAYBACK) {
+		dmactl = drvdata->rd_dmactl;
+		id = pcm_data->dma_ch;
+	} else {
+		dmactl = drvdata->wr_dmactl;
+		id = pcm_data->dma_ch - v->wrdma_channel_start;
+	}
 
 	ret = regmap_write(drvdata->lpaif_map,
 			LPAIF_DMABASE_REG(v, ch, dir),
@@ -276,9 +351,7 @@ static int lpass_platform_pcmops_prepare(struct snd_soc_component *component,
 		return ret;
 	}
 
-	ret = regmap_update_bits(drvdata->lpaif_map,
-			LPAIF_DMACTL_REG(v, ch, dir),
-			LPAIF_DMACTL_ENABLE_MASK, LPAIF_DMACTL_ENABLE_ON);
+	ret = regmap_fields_write(dmactl->enable, id, LPAIF_DMACTL_ENABLE_ON);
 	if (ret) {
 		dev_err(soc_runtime->dev, "error writing to rdmactl reg: %d\n",
 			ret);
@@ -297,9 +370,18 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component,
 	struct snd_pcm_runtime *rt = substream->runtime;
 	struct lpass_pcm_data *pcm_data = rt->private_data;
 	struct lpass_variant *v = drvdata->variant;
-	int ret, ch, dir = substream->stream;
+	struct lpaif_dmactl *dmactl;
+	int ret, ch, id;
+	int dir = substream->stream;
 
 	ch = pcm_data->dma_ch;
+	if (dir ==  SNDRV_PCM_STREAM_PLAYBACK) {
+		dmactl = drvdata->rd_dmactl;
+		id = pcm_data->dma_ch;
+	} else {
+		dmactl = drvdata->wr_dmactl;
+		id = pcm_data->dma_ch - v->wrdma_channel_start;
+	}
 
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
@@ -325,10 +407,8 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component,
 			return ret;
 		}
 
-		ret = regmap_update_bits(drvdata->lpaif_map,
-				LPAIF_DMACTL_REG(v, ch, dir),
-				LPAIF_DMACTL_ENABLE_MASK,
-				LPAIF_DMACTL_ENABLE_ON);
+		ret = regmap_fields_write(dmactl->enable, id,
+					 LPAIF_DMACTL_ENABLE_ON);
 		if (ret) {
 			dev_err(soc_runtime->dev,
 				"error writing to rdmactl reg: %d\n", ret);
@@ -338,10 +418,8 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component,
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		ret = regmap_update_bits(drvdata->lpaif_map,
-				LPAIF_DMACTL_REG(v, ch, dir),
-				LPAIF_DMACTL_ENABLE_MASK,
-				LPAIF_DMACTL_ENABLE_OFF);
+		ret = regmap_fields_write(dmactl->enable, id,
+					 LPAIF_DMACTL_ENABLE_OFF);
 		if (ret) {
 			dev_err(soc_runtime->dev,
 				"error writing to rdmactl reg: %d\n", ret);
@@ -580,6 +658,13 @@ int asoc_qcom_lpass_platform_register(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = lpass_platform_alloc_dmactl_fields(&pdev->dev,
+						 drvdata->lpaif_map);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"error initializing dmactl fields: %d\n", ret);
+		return ret;
+	}
 
 	return devm_snd_soc_register_component(&pdev->dev,
 			&lpass_component_driver, NULL, 0);
diff --git a/sound/soc/qcom/lpass.h b/sound/soc/qcom/lpass.h
index 450020e..51c9991 100644
--- a/sound/soc/qcom/lpass.h
+++ b/sound/soc/qcom/lpass.h
@@ -17,6 +17,28 @@
 #define LPASS_MAX_MI2S_PORTS			(8)
 #define LPASS_MAX_DMA_CHANNELS			(8)
 
+struct lpaif_i2sctl {
+	struct regmap_field *loopback;
+	struct regmap_field *spken;
+	struct regmap_field *spkmode;
+	struct regmap_field *spkmono;
+	struct regmap_field *micen;
+	struct regmap_field *micmode;
+	struct regmap_field *micmono;
+	struct regmap_field *wssrc;
+	struct regmap_field *bitwidth;
+};
+
+
+struct lpaif_dmactl {
+	struct regmap_field *bursten;
+	struct regmap_field *wpscnt;
+	struct regmap_field *intf;
+	struct regmap_field *fifowm;
+	struct regmap_field *enable;
+	struct regmap_field *dyncclk;
+};
+
 /* Both the CPU DAI and platform drivers will access this data */
 struct lpass_data {
 
@@ -55,6 +77,10 @@ struct lpass_data {
 	struct clk_bulk_data *clks;
 	int num_clks;
 
+	/* Regmap fields of I2SCTL & DMACTL registers bitfields */
+	struct lpaif_i2sctl *i2sctl;
+	struct lpaif_dmactl *rd_dmactl;
+	struct lpaif_dmactl *wr_dmactl;
 };
 
 /* Vairant data per each SOC */
@@ -72,6 +98,33 @@ struct lpass_variant {
 	u32	wrdma_reg_stride;
 	u32	wrdma_channels;
 
+	/* I2SCTL Register fields */
+	struct reg_field loopback;
+	struct reg_field spken;
+	struct reg_field spkmode;
+	struct reg_field spkmono;
+	struct reg_field micen;
+	struct reg_field micmode;
+	struct reg_field micmono;
+	struct reg_field wssrc;
+	struct reg_field bitwidth;
+
+	/* RD_DMA Register fields */
+	struct reg_field rdma_bursten;
+	struct reg_field rdma_wpscnt;
+	struct reg_field rdma_intf;
+	struct reg_field rdma_fifowm;
+	struct reg_field rdma_enable;
+	struct reg_field rdma_dyncclk;
+
+	/* WR_DMA Register fields */
+	struct reg_field wrdma_bursten;
+	struct reg_field wrdma_wpscnt;
+	struct reg_field wrdma_intf;
+	struct reg_field wrdma_fifowm;
+	struct reg_field wrdma_enable;
+	struct reg_field wrdma_dyncclk;
+
 	/**
 	 * on SOCs like APQ8016 the channel control bits start
 	 * at different offset to ipq806x
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH v5 06/12] ASoC: qcom: lpass-cpu: fix concurrency issue

[Rohit kumar]

i2sctl register value is set to 0 during hw_free(). This
impacts any ongoing concurrent session on the same i2s
port. As trigger() stop already resets enable bit to 0,
there is no need of explicit hw_free. Removing it to
fix the issue.

Fixes: 80beab8e1d86 ("ASoC: qcom: Add LPASS CPU DAI driver")
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/lpass-cpu.c | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index 6b86f16..5d84f63 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -266,21 +266,6 @@ static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static int lpass_cpu_daiops_hw_free(struct snd_pcm_substream *substream,
-		struct snd_soc_dai *dai)
-{
-	struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
-	int ret;
-
-	ret = regmap_write(drvdata->lpaif_map,
-			   LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
-			   0);
-	if (ret)
-		dev_err(dai->dev, "error writing to i2sctl reg: %d\n", ret);
-
-	return ret;
-}
-
 static int lpass_cpu_daiops_prepare(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {
@@ -350,7 +335,6 @@ const struct snd_soc_dai_ops asoc_qcom_lpass_cpu_dai_ops = {
 	.startup	= lpass_cpu_daiops_startup,
 	.shutdown	= lpass_cpu_daiops_shutdown,
 	.hw_params	= lpass_cpu_daiops_hw_params,
-	.hw_free	= lpass_cpu_daiops_hw_free,
 	.prepare	= lpass_cpu_daiops_prepare,
 	.trigger	= lpass_cpu_daiops_trigger,
 };
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH v5 07/12] dt-bindings: sound: lpass-cpu: Add sc7180 lpass cpu node

[Rohit kumar]

Add dt-bindings to support "qcom,lpass-cpu-sc7180" node.

Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
---
 .../devicetree/bindings/sound/qcom,lpass-cpu.txt   | 55 +++++++++++++++++++++-
 1 file changed, 53 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
index 32c2cdb..c07202c 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
@@ -4,7 +4,8 @@ This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
 
 Required properties:
 
-- compatible		: "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu"
+- compatible		: "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
+			  "qcom,sc7180-lpass-cpu"
 - clocks		: Must contain an entry for each entry in clock-names.
 - clock-names		: A list which must include the following entries:
 				* "ahbix-clk"
@@ -18,6 +19,13 @@ Required properties:
 				* "mi2s-bit-clk3"
 				* "pcnoc-mport-clk"
 				* "pcnoc-sway-clk"
+			: required clocks for "qcom,lpass-cpu-sc7180"
+				* "audio-core"
+				* "mclk0"
+				* "mi2s-bit-clk0"
+				* "mi2s-bit-clk1"
+				* "pcnoc-sway-clk"
+				* "pcnoc-mport-clk"
 
 - interrupts		: Must contain an entry for each entry in
 			  interrupt-names.
@@ -53,7 +61,8 @@ Required properties for each DAI (represented by a subnode):
 Note that adding a subnode changes the default to "no lines configured",
 so both playback and capture lines should be configured when a subnode is added.
 
-Example:
+Examples:
+1)
 
 lpass@28100000 {
 	compatible = "qcom,lpass-cpu";
@@ -77,3 +86,45 @@ lpass@28100000 {
 		qcom,playback-sd-lines = <0 1>;
 	};
 };
+
+2)
+
+#include <dt-bindings/sound/sc7180-lpass.h>
+
+lpass_cpu: lpass {
+	compatible = "qcom,sc7180-lpass-cpu";
+
+	reg = <0 0x62F00000 0 0x29000>;
+
+	iommus = <&apps_smmu 0x1020 0>;
+
+	power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+	clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
+		<&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>,
+		<&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
+		<&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
+		<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
+		<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
+	clock-names = "pcnoc-sway-clk", "audio-core",
+			"mclk0", "pcnoc-mport-clk",
+			"mi2s-bit-clk0", "mi2s-bit-clk1";
+	interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "lpass-irq-lpaif";
+
+
+	#sound-dai-cells = <1>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	mi2s-primary@0 {
+		reg = <MI2S_PRIMARY>;
+		qcom,playback-sd-lines = <1>;
+		qcom,capture-sd-lines = <0>;
+	};
+
+	mi2s-secondary@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+};
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

Re: [PATCH v5 07/12] dt-bindings: sound: lpass-cpu: Add sc7180 lpass cpu node

[Rob Herring]

On Tue, 04 Aug 2020 13:37:28 +0530, Rohit kumar wrote:
> Add dt-bindings to support "qcom,lpass-cpu-sc7180" node.
> 
> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
> ---
>  .../devicetree/bindings/sound/qcom,lpass-cpu.txt   | 55 +++++++++++++++++++++-
>  1 file changed, 53 insertions(+), 2 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH v5 08/12] include: dt-bindings: sound: Add sc7180-lpass bindings header

[Rohit kumar]

From: Ajit Pandey <ajitp@codeaurora.org>

Add header defining dai-id and mclk id for SC7180 lpass soc.

Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 include/dt-bindings/sound/sc7180-lpass.h | 10 ++++++++++
 1 file changed, 10 insertions(+)
 create mode 100644 include/dt-bindings/sound/sc7180-lpass.h

diff --git a/include/dt-bindings/sound/sc7180-lpass.h b/include/dt-bindings/sound/sc7180-lpass.h
new file mode 100644
index 00000000..7d988f6
--- /dev/null
+++ b/include/dt-bindings/sound/sc7180-lpass.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_SC7180_LPASS_H
+#define __DT_SC7180_LPASS_H
+
+#define MI2S_PRIMARY	0
+#define MI2S_SECONDARY	1
+
+#define LPASS_MCLK0	0
+
+#endif /* __DT_APQ8016_LPASS_H */
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH v5 09/12] ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio

[Rohit kumar]

From: Ajit Pandey <ajitp@codeaurora.org>

Add platform driver for configuring sc7180 lpass core I2S and
DMA configuration to support playback & capture to external codecs
connected over primary & secondary MI2S interfaces.

Signed-off-by: Ajit Pandey <ajitp@codeaurora.org>
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/Kconfig        |   5 +
 sound/soc/qcom/Makefile       |   2 +
 sound/soc/qcom/lpass-sc7180.c | 216 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 223 insertions(+)
 create mode 100644 sound/soc/qcom/lpass-sc7180.c

diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 5d6b246..b47d2bdd 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -24,6 +24,11 @@ config SND_SOC_LPASS_APQ8016
 	select SND_SOC_LPASS_CPU
 	select SND_SOC_LPASS_PLATFORM
 
+config SND_SOC_LPASS_SC7180
+	tristate
+	select SND_SOC_LPASS_CPU
+	select SND_SOC_LPASS_PLATFORM
+
 config SND_SOC_STORM
 	tristate "ASoC I2S support for Storm boards"
 	depends on SND_SOC_QCOM
diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
index 41b2c7a..7972c94 100644
--- a/sound/soc/qcom/Makefile
+++ b/sound/soc/qcom/Makefile
@@ -4,11 +4,13 @@ snd-soc-lpass-cpu-objs := lpass-cpu.o
 snd-soc-lpass-platform-objs := lpass-platform.o
 snd-soc-lpass-ipq806x-objs := lpass-ipq806x.o
 snd-soc-lpass-apq8016-objs := lpass-apq8016.o
+snd-soc-lpass-sc7180-objs := lpass-sc7180.o
 
 obj-$(CONFIG_SND_SOC_LPASS_CPU) += snd-soc-lpass-cpu.o
 obj-$(CONFIG_SND_SOC_LPASS_PLATFORM) += snd-soc-lpass-platform.o
 obj-$(CONFIG_SND_SOC_LPASS_IPQ806X) += snd-soc-lpass-ipq806x.o
 obj-$(CONFIG_SND_SOC_LPASS_APQ8016) += snd-soc-lpass-apq8016.o
+obj-$(CONFIG_SND_SOC_LPASS_SC7180) += snd-soc-lpass-sc7180.o
 
 # Machine
 snd-soc-storm-objs := storm.o
diff --git a/sound/soc/qcom/lpass-sc7180.c b/sound/soc/qcom/lpass-sc7180.c
new file mode 100644
index 00000000..b4c6a04
--- /dev/null
+++ b/sound/soc/qcom/lpass-sc7180.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ *
+ * lpass-sc7180.c -- ALSA SoC platform-machine driver for QTi LPASS
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/sound/sc7180-lpass.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+
+#include "lpass-lpaif-reg.h"
+#include "lpass.h"
+
+static struct snd_soc_dai_driver sc7180_lpass_cpu_dai_driver[] = {
+	[MI2S_PRIMARY] = {
+		.id = MI2S_PRIMARY,
+		.name = "Primary MI2S",
+		.playback = {
+			.stream_name = "Primary Playback",
+			.formats	= SNDRV_PCM_FMTBIT_S16,
+			.rates = SNDRV_PCM_RATE_48000,
+			.rate_min	= 48000,
+			.rate_max	= 48000,
+			.channels_min	= 2,
+			.channels_max	= 2,
+		},
+		.capture = {
+			.stream_name = "Primary Capture",
+			.formats = SNDRV_PCM_FMTBIT_S16,
+			.rates = SNDRV_PCM_RATE_48000,
+			.rate_min	= 48000,
+			.rate_max	= 48000,
+			.channels_min	= 2,
+			.channels_max	= 2,
+		},
+		.probe	= &asoc_qcom_lpass_cpu_dai_probe,
+		.ops    = &asoc_qcom_lpass_cpu_dai_ops,
+	},
+
+	[MI2S_SECONDARY] = {
+		.id = MI2S_SECONDARY,
+		.name = "Secondary MI2S",
+		.playback = {
+			.stream_name = "Secondary Playback",
+			.formats	= SNDRV_PCM_FMTBIT_S16,
+			.rates = SNDRV_PCM_RATE_48000,
+			.rate_min	= 48000,
+			.rate_max	= 48000,
+			.channels_min	= 2,
+			.channels_max	= 2,
+		},
+		.probe	= &asoc_qcom_lpass_cpu_dai_probe,
+		.ops    = &asoc_qcom_lpass_cpu_dai_ops,
+	},
+};
+
+static int sc7180_lpass_alloc_dma_channel(struct lpass_data *drvdata,
+					   int direction)
+{
+	struct lpass_variant *v = drvdata->variant;
+	int chan = 0;
+
+	if (direction == SNDRV_PCM_STREAM_PLAYBACK) {
+		chan = find_first_zero_bit(&drvdata->dma_ch_bit_map,
+					v->rdma_channels);
+
+		if (chan >= v->rdma_channels)
+			return -EBUSY;
+	} else {
+		chan = find_next_zero_bit(&drvdata->dma_ch_bit_map,
+					v->wrdma_channel_start +
+					v->wrdma_channels,
+					v->wrdma_channel_start);
+
+		if (chan >=  v->wrdma_channel_start + v->wrdma_channels)
+			return -EBUSY;
+	}
+
+	set_bit(chan, &drvdata->dma_ch_bit_map);
+
+	return chan;
+}
+
+static int sc7180_lpass_free_dma_channel(struct lpass_data *drvdata, int chan)
+{
+	clear_bit(chan, &drvdata->dma_ch_bit_map);
+
+	return 0;
+}
+
+static int sc7180_lpass_init(struct platform_device *pdev)
+{
+	struct lpass_data *drvdata = platform_get_drvdata(pdev);
+	struct lpass_variant *variant = drvdata->variant;
+	struct device *dev = &pdev->dev;
+	int ret, i;
+
+	drvdata->clks = devm_kcalloc(dev, variant->num_clks,
+				     sizeof(*drvdata->clks), GFP_KERNEL);
+	drvdata->num_clks = variant->num_clks;
+
+	for (i = 0; i < drvdata->num_clks; i++)
+		drvdata->clks[i].id = variant->clk_name[i];
+
+	ret = devm_clk_bulk_get(dev, drvdata->num_clks, drvdata->clks);
+	if (ret) {
+		dev_err(dev, "Failed to get clocks %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_bulk_prepare_enable(drvdata->num_clks, drvdata->clks);
+	if (ret) {
+		dev_err(dev, "sc7180 clk_enable failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sc7180_lpass_exit(struct platform_device *pdev)
+{
+	struct lpass_data *drvdata = platform_get_drvdata(pdev);
+
+	clk_bulk_disable_unprepare(drvdata->num_clks, drvdata->clks);
+
+	return 0;
+}
+
+static struct lpass_variant sc7180_data = {
+	.i2sctrl_reg_base	= 0x1000,
+	.i2sctrl_reg_stride	= 0x1000,
+	.i2s_ports		= 3,
+	.irq_reg_base		= 0x9000,
+	.irq_reg_stride		= 0x1000,
+	.irq_ports		= 3,
+	.rdma_reg_base		= 0xC000,
+	.rdma_reg_stride	= 0x1000,
+	.rdma_channels		= 5,
+	.dmactl_audif_start	= 1,
+	.wrdma_reg_base		= 0x18000,
+	.wrdma_reg_stride	= 0x1000,
+	.wrdma_channel_start	= 5,
+	.wrdma_channels		= 4,
+
+	.loopback		= REG_FIELD_ID(0x1000, 17, 17, 3, 0x1000),
+	.spken			= REG_FIELD_ID(0x1000, 16, 16, 3, 0x1000),
+	.spkmode		= REG_FIELD_ID(0x1000, 11, 15, 3, 0x1000),
+	.spkmono		= REG_FIELD_ID(0x1000, 10, 10, 3, 0x1000),
+	.micen			= REG_FIELD_ID(0x1000, 9, 9, 3, 0x1000),
+	.micmode		= REG_FIELD_ID(0x1000, 4, 8, 3, 0x1000),
+	.micmono		= REG_FIELD_ID(0x1000, 3, 3, 3, 0x1000),
+	.wssrc			= REG_FIELD_ID(0x1000, 2, 2, 3, 0x1000),
+	.bitwidth		= REG_FIELD_ID(0x1000, 0, 0, 3, 0x1000),
+
+	.rdma_dyncclk		= REG_FIELD_ID(0xC000, 21, 21, 5, 0x1000),
+	.rdma_bursten		= REG_FIELD_ID(0xC000, 20, 20, 5, 0x1000),
+	.rdma_wpscnt		= REG_FIELD_ID(0xC000, 16, 19, 5, 0x1000),
+	.rdma_intf		= REG_FIELD_ID(0xC000, 12, 15, 5, 0x1000),
+	.rdma_fifowm		= REG_FIELD_ID(0xC000, 1, 5, 5, 0x1000),
+	.rdma_enable		= REG_FIELD_ID(0xC000, 0, 0, 5, 0x1000),
+
+	.wrdma_dyncclk		= REG_FIELD_ID(0x18000, 22, 22, 4, 0x1000),
+	.wrdma_bursten		= REG_FIELD_ID(0x18000, 21, 21, 4, 0x1000),
+	.wrdma_wpscnt		= REG_FIELD_ID(0x18000, 17, 20, 4, 0x1000),
+	.wrdma_intf		= REG_FIELD_ID(0x18000, 12, 16, 4, 0x1000),
+	.wrdma_fifowm		= REG_FIELD_ID(0x18000, 1, 5, 4, 0x1000),
+	.wrdma_enable		= REG_FIELD_ID(0x18000, 0, 0, 4, 0x1000),
+
+	.clk_name		= (const char*[]) {
+				   "pcnoc-sway-clk",
+				   "audio-core",
+				   "pcnoc-mport-clk",
+				},
+	.num_clks		= 3,
+	.dai_driver		= sc7180_lpass_cpu_dai_driver,
+	.num_dai		= ARRAY_SIZE(sc7180_lpass_cpu_dai_driver),
+	.dai_osr_clk_names      = (const char *[]) {
+				   "mclk0",
+				   "null",
+				},
+	.dai_bit_clk_names      = (const char *[]) {
+				   "mi2s-bit-clk0",
+				   "mi2s-bit-clk1",
+				},
+	.init			= sc7180_lpass_init,
+	.exit			= sc7180_lpass_exit,
+	.alloc_dma_channel	= sc7180_lpass_alloc_dma_channel,
+	.free_dma_channel	= sc7180_lpass_free_dma_channel,
+};
+
+static const struct of_device_id sc7180_lpass_cpu_device_id[] = {
+	{.compatible = "qcom,sc7180-lpass-cpu", .data = &sc7180_data},
+	{}
+};
+
+static struct platform_driver sc7180_lpass_cpu_platform_driver = {
+	.driver = {
+		.name = "sc7180-lpass-cpu",
+		.of_match_table = of_match_ptr(sc7180_lpass_cpu_device_id),
+	},
+	.probe = asoc_qcom_lpass_cpu_platform_probe,
+	.remove = asoc_qcom_lpass_cpu_platform_probe,
+};
+
+module_platform_driver(sc7180_lpass_cpu_platform_driver);
+
+MODULE_DESCRIPTION("SC7180 LPASS CPU DRIVER");
+MODULE_LICENSE("GPL v2");
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH v5 10/12] ASoC: qcom: lpass-cpu: Use platform_get_resource

[Rohit kumar]

platform_get_resource_byname() is used when there
is list of reg entries. As lpass-cpu node has only
one reg entry, use platform_get_resource() instead.

Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/lpass-cpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index 5d84f63..1ee6d8b 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -575,7 +575,7 @@ int asoc_qcom_lpass_cpu_platform_probe(struct platform_device *pdev)
 
 	of_lpass_cpu_parse_dai_data(dev, drvdata);
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lpass-lpaif");
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
 	drvdata->lpaif = devm_ioremap_resource(dev, res);
 	if (IS_ERR((void const __force *)drvdata->lpaif)) {
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH v5 11/12] ASoC: qcom: lpass-platform: Use platform_get_irq

[Rohit kumar]

platform_get_irq_byname() is used when there is list
of interrupts in the device node. As lpass-platform
has only one interrupt entry, use platform_get_irq()
instead.

Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
---
 sound/soc/qcom/lpass-platform.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
index 35aead1..df692ed 100644
--- a/sound/soc/qcom/lpass-platform.c
+++ b/sound/soc/qcom/lpass-platform.c
@@ -638,7 +638,7 @@ int asoc_qcom_lpass_platform_register(struct platform_device *pdev)
 	struct lpass_variant *v = drvdata->variant;
 	int ret;
 
-	drvdata->lpaif_irq = platform_get_irq_byname(pdev, "lpass-irq-lpaif");
+	drvdata->lpaif_irq = platform_get_irq(pdev, 0);
 	if (drvdata->lpaif_irq < 0)
 		return -ENODEV;
 
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

[PATCH v5 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format

[Rohit kumar]

Update lpass-cpu binding with yaml formats.

Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
---
 .../devicetree/bindings/sound/qcom,lpass-cpu.txt   | 130 ---------------
 .../devicetree/bindings/sound/qcom,lpass-cpu.yaml  | 179 +++++++++++++++++++++
 2 files changed, 179 insertions(+), 130 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml

diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
deleted file mode 100644
index c07202c..00000000
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-* Qualcomm Technologies LPASS CPU DAI
-
-This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
-
-Required properties:
-
-- compatible		: "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
-			  "qcom,sc7180-lpass-cpu"
-- clocks		: Must contain an entry for each entry in clock-names.
-- clock-names		: A list which must include the following entries:
-				* "ahbix-clk"
-				* "mi2s-osr-clk"
-				* "mi2s-bit-clk"
-			: required clocks for "qcom,lpass-cpu-apq8016"
-				* "ahbix-clk"
-				* "mi2s-bit-clk0"
-				* "mi2s-bit-clk1"
-				* "mi2s-bit-clk2"
-				* "mi2s-bit-clk3"
-				* "pcnoc-mport-clk"
-				* "pcnoc-sway-clk"
-			: required clocks for "qcom,lpass-cpu-sc7180"
-				* "audio-core"
-				* "mclk0"
-				* "mi2s-bit-clk0"
-				* "mi2s-bit-clk1"
-				* "pcnoc-sway-clk"
-				* "pcnoc-mport-clk"
-
-- interrupts		: Must contain an entry for each entry in
-			  interrupt-names.
-- interrupt-names	: A list which must include the following entries:
-				* "lpass-irq-lpaif"
-- pinctrl-N		: One property must exist for each entry in
-			  pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
-			  for details of the property values.
-- pinctrl-names		: Must contain a "default" entry.
-- reg			: Must contain an address for each entry in reg-names.
-- reg-names		: A list which must include the following entries:
-				* "lpass-lpaif"
-- #address-cells	: Must be 1
-- #size-cells		: Must be 0
-
-
-
-Optional properties:
-
-- qcom,adsp		: Phandle for the audio DSP node
-
-By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
-The SD lines to use can be configured by adding subnodes for each of the DAIs.
-
-Required properties for each DAI (represented by a subnode):
-- reg			: Must be one of the DAI IDs
-			  (usually part of dt-bindings header)
-- qcom,playback-sd-lines: List of serial data lines to use for playback
-			  Each SD line should be represented by a number from 0-3.
-- qcom,capture-sd-lines	: List of serial data lines to use for capture
-			  Each SD line should be represented by a number from 0-3.
-
-Note that adding a subnode changes the default to "no lines configured",
-so both playback and capture lines should be configured when a subnode is added.
-
-Examples:
-1)
-
-lpass@28100000 {
-	compatible = "qcom,lpass-cpu";
-	clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
-	clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
-	interrupts = <0 85 1>;
-	interrupt-names = "lpass-irq-lpaif";
-	pinctrl-names = "default", "idle";
-	pinctrl-0 = <&mi2s_default>;
-	pinctrl-1 = <&mi2s_idle>;
-	reg = <0x28100000 0x10000>;
-	reg-names = "lpass-lpaif";
-	qcom,adsp = <&adsp>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	/* Optional to set different MI2S SD lines */
-	dai@3 {
-		reg = <MI2S_QUATERNARY>;
-		qcom,playback-sd-lines = <0 1>;
-	};
-};
-
-2)
-
-#include <dt-bindings/sound/sc7180-lpass.h>
-
-lpass_cpu: lpass {
-	compatible = "qcom,sc7180-lpass-cpu";
-
-	reg = <0 0x62F00000 0 0x29000>;
-
-	iommus = <&apps_smmu 0x1020 0>;
-
-	power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
-	clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
-		<&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>,
-		<&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
-		<&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
-		<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
-		<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
-	clock-names = "pcnoc-sway-clk", "audio-core",
-			"mclk0", "pcnoc-mport-clk",
-			"mi2s-bit-clk0", "mi2s-bit-clk1";
-	interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "lpass-irq-lpaif";
-
-
-	#sound-dai-cells = <1>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	mi2s-primary@0 {
-		reg = <MI2S_PRIMARY>;
-		qcom,playback-sd-lines = <1>;
-		qcom,capture-sd-lines = <0>;
-	};
-
-	mi2s-secondary@1 {
-		reg = <MI2S_SECONDARY>;
-		qcom,playback-sd-lines = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
new file mode 100644
index 00000000..5c1881d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Rohit kumar <rohitkr@codeaurora.org>
+
+description: |
+  Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist
+  of MI2S interface for audio data transfer on external codecs. LPASS cpu driver
+  is a module to configure Low-Power Audio Interface(LPAIF) core registers
+  across different IP versions.
+
+properties:
+  compatible:
+    enum:
+      - qcom,lpass-cpu
+      - qcom,apq8016-lpass-cpu
+      - qcom,sc7180-lpass-cpu
+
+  reg:
+    maxItems: 1
+    description: LPAIF core registers
+
+  clocks:
+    minItems: 3
+    maxItems: 6
+
+  clock-names:
+    minItems: 3
+    maxItems: 6
+
+  interrupts:
+    maxItems: 1
+    description: LPAIF DMA buffer interrupt
+
+  qcom,adsp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle for the audio DSP node
+
+  iommus:
+    maxItems: 1
+    description: Phandle to apps_smmu node with sid mask
+
+  power-domains:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "(^mi2s-[0-9a-f]$|mi2s)":
+    type: object
+    description: Required properties for each DAI
+
+    properties:
+      reg:
+        maxItems: 1
+        description: Must be one of the DAI ID
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: ahbix-clk
+            - const: mi2s-osr-clk
+            - const: mi2s-bit-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,apq8016-lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: ahbix-clk
+            - const: mi2s-bit-clk0
+            - const: mi2s-bit-clk1
+            - const: mi2s-bit-clk2
+            - const: mi2s-bit-clk3
+            - const: pcnoc-mport-clk
+            - const: pcnoc-sway-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7180-lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pcnoc-sway-clk
+            - const: audio-core
+            - const: mclk0
+            - const: pcnoc-mport-clk
+            - const: mi2s-bit-clk0
+            - const: mi2s-bit-clk1
+      required:
+        - iommus
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/sound/sc7180-lpass.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        lpass@62f00000 {
+            compatible = "qcom,sc7180-lpass-cpu";
+
+            reg = <0 0x62f00000  0 0x29000>;
+
+            iommus = <&apps_smmu 0x1020 0>;
+            power-domains = <&lpass_hm 0>;
+
+            clocks = <&gcc 131>,
+                 <&lpasscorecc 6>,
+                 <&lpasscorecc 7>,
+                 <&lpasscorecc 10>,
+                 <&lpasscorecc 8>,
+                 <&lpasscorecc 9>;
+
+            clock-names = "pcnoc-sway-clk", "audio-core",
+                          "mclk0", "pcnoc-mport-clk",
+                          "mi2s-bit-clk0", "mi2s-bit-clk1";
+
+            interrupts = <0 160 1>;
+
+            #sound-dai-cells = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+            /* Optional to set different MI2S SD lines */
+            mi2s-primary@0 {
+                reg = <MI2S_PRIMARY>;
+                qcom,playback-sd-lines = <1>;
+                qcom,capture-sd-lines = <0>;
+            };
+        };
+    };
+
+...
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

Re: [PATCH v5 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format

[Rob Herring]

On Tue, Aug 04, 2020 at 01:37:33PM +0530, Rohit kumar wrote:
> Update lpass-cpu binding with yaml formats.
> 
> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
> ---
>  .../devicetree/bindings/sound/qcom,lpass-cpu.txt   | 130 ---------------
>  .../devicetree/bindings/sound/qcom,lpass-cpu.yaml  | 179 +++++++++++++++++++++
>  2 files changed, 179 insertions(+), 130 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
> deleted file mode 100644
> index c07202c..00000000
> --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
> +++ /dev/null
> @@ -1,130 +0,0 @@
> -* Qualcomm Technologies LPASS CPU DAI
> -
> -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
> -
> -Required properties:
> -
> -- compatible		: "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
> -			  "qcom,sc7180-lpass-cpu"
> -- clocks		: Must contain an entry for each entry in clock-names.
> -- clock-names		: A list which must include the following entries:
> -				* "ahbix-clk"
> -				* "mi2s-osr-clk"
> -				* "mi2s-bit-clk"
> -			: required clocks for "qcom,lpass-cpu-apq8016"
> -				* "ahbix-clk"
> -				* "mi2s-bit-clk0"
> -				* "mi2s-bit-clk1"
> -				* "mi2s-bit-clk2"
> -				* "mi2s-bit-clk3"
> -				* "pcnoc-mport-clk"
> -				* "pcnoc-sway-clk"
> -			: required clocks for "qcom,lpass-cpu-sc7180"
> -				* "audio-core"
> -				* "mclk0"
> -				* "mi2s-bit-clk0"
> -				* "mi2s-bit-clk1"
> -				* "pcnoc-sway-clk"
> -				* "pcnoc-mport-clk"
> -
> -- interrupts		: Must contain an entry for each entry in
> -			  interrupt-names.
> -- interrupt-names	: A list which must include the following entries:
> -				* "lpass-irq-lpaif"
> -- pinctrl-N		: One property must exist for each entry in
> -			  pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
> -			  for details of the property values.
> -- pinctrl-names		: Must contain a "default" entry.
> -- reg			: Must contain an address for each entry in reg-names.
> -- reg-names		: A list which must include the following entries:
> -				* "lpass-lpaif"
> -- #address-cells	: Must be 1
> -- #size-cells		: Must be 0
> -
> -
> -
> -Optional properties:
> -
> -- qcom,adsp		: Phandle for the audio DSP node
> -
> -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
> -The SD lines to use can be configured by adding subnodes for each of the DAIs.
> -
> -Required properties for each DAI (represented by a subnode):
> -- reg			: Must be one of the DAI IDs
> -			  (usually part of dt-bindings header)
> -- qcom,playback-sd-lines: List of serial data lines to use for playback
> -			  Each SD line should be represented by a number from 0-3.
> -- qcom,capture-sd-lines	: List of serial data lines to use for capture
> -			  Each SD line should be represented by a number from 0-3.
> -
> -Note that adding a subnode changes the default to "no lines configured",
> -so both playback and capture lines should be configured when a subnode is added.
> -
> -Examples:
> -1)
> -
> -lpass@28100000 {
> -	compatible = "qcom,lpass-cpu";
> -	clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
> -	clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
> -	interrupts = <0 85 1>;
> -	interrupt-names = "lpass-irq-lpaif";
> -	pinctrl-names = "default", "idle";
> -	pinctrl-0 = <&mi2s_default>;
> -	pinctrl-1 = <&mi2s_idle>;
> -	reg = <0x28100000 0x10000>;
> -	reg-names = "lpass-lpaif";
> -	qcom,adsp = <&adsp>;
> -
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -
> -	/* Optional to set different MI2S SD lines */
> -	dai@3 {
> -		reg = <MI2S_QUATERNARY>;
> -		qcom,playback-sd-lines = <0 1>;
> -	};
> -};
> -
> -2)
> -
> -#include <dt-bindings/sound/sc7180-lpass.h>
> -
> -lpass_cpu: lpass {
> -	compatible = "qcom,sc7180-lpass-cpu";
> -
> -	reg = <0 0x62F00000 0 0x29000>;
> -
> -	iommus = <&apps_smmu 0x1020 0>;
> -
> -	power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
> -	clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
> -		<&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>,
> -		<&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
> -		<&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
> -		<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
> -		<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
> -	clock-names = "pcnoc-sway-clk", "audio-core",
> -			"mclk0", "pcnoc-mport-clk",
> -			"mi2s-bit-clk0", "mi2s-bit-clk1";
> -	interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
> -	interrupt-names = "lpass-irq-lpaif";
> -
> -
> -	#sound-dai-cells = <1>;
> -
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -
> -	mi2s-primary@0 {
> -		reg = <MI2S_PRIMARY>;
> -		qcom,playback-sd-lines = <1>;
> -		qcom,capture-sd-lines = <0>;
> -	};
> -
> -	mi2s-secondary@1 {
> -		reg = <MI2S_SECONDARY>;
> -		qcom,playback-sd-lines = <0>;
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
> new file mode 100644
> index 00000000..5c1881d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
> @@ -0,0 +1,179 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings
> +
> +maintainers:
> +  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> +  - Rohit kumar <rohitkr@codeaurora.org>
> +
> +description: |
> +  Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist
> +  of MI2S interface for audio data transfer on external codecs. LPASS cpu driver
> +  is a module to configure Low-Power Audio Interface(LPAIF) core registers
> +  across different IP versions.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,lpass-cpu
> +      - qcom,apq8016-lpass-cpu
> +      - qcom,sc7180-lpass-cpu
> +
> +  reg:
> +    maxItems: 1
> +    description: LPAIF core registers
> +
> +  clocks:
> +    minItems: 3
> +    maxItems: 6
> +
> +  clock-names:
> +    minItems: 3
> +    maxItems: 6
> +
> +  interrupts:
> +    maxItems: 1
> +    description: LPAIF DMA buffer interrupt
> +
> +  qcom,adsp:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Phandle for the audio DSP node
> +
> +  iommus:
> +    maxItems: 1
> +    description: Phandle to apps_smmu node with sid mask
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  '#sound-dai-cells':
> +    const: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +patternProperties:
> +  "(^mi2s-[0-9a-f]$|mi2s)":

I believe this will work:

"^mi2s(-[0-9a-f])?$"

> +    type: object
> +    description: Required properties for each DAI
> +
> +    properties:
> +      reg:
> +        maxItems: 1
> +        description: Must be one of the DAI ID
> +
> +    required:
> +      - reg

       additionalProperties: false

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - '#sound-dai-cells'
> +
> +additionalProperties: false
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,lpass-cpu
> +
> +    then:
> +      properties:
> +        clock-names:
> +          items:
> +            - const: ahbix-clk
> +            - const: mi2s-osr-clk
> +            - const: mi2s-bit-clk
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,apq8016-lpass-cpu
> +
> +    then:
> +      properties:
> +        clock-names:
> +          items:
> +            - const: ahbix-clk
> +            - const: mi2s-bit-clk0
> +            - const: mi2s-bit-clk1
> +            - const: mi2s-bit-clk2
> +            - const: mi2s-bit-clk3
> +            - const: pcnoc-mport-clk
> +            - const: pcnoc-sway-clk
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,sc7180-lpass-cpu
> +
> +    then:
> +      properties:
> +        clock-names:
> +          items:
> +            - const: pcnoc-sway-clk
> +            - const: audio-core
> +            - const: mclk0
> +            - const: pcnoc-mport-clk
> +            - const: mi2s-bit-clk0
> +            - const: mi2s-bit-clk1
> +      required:
> +        - iommus
> +        - power-domains
> +
> +examples:
> +  - |
> +    #include <dt-bindings/sound/sc7180-lpass.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        lpass@62f00000 {
> +            compatible = "qcom,sc7180-lpass-cpu";
> +
> +            reg = <0 0x62f00000  0 0x29000>;
> +
> +            iommus = <&apps_smmu 0x1020 0>;
> +            power-domains = <&lpass_hm 0>;
> +
> +            clocks = <&gcc 131>,
> +                 <&lpasscorecc 6>,
> +                 <&lpasscorecc 7>,
> +                 <&lpasscorecc 10>,
> +                 <&lpasscorecc 8>,
> +                 <&lpasscorecc 9>;
> +
> +            clock-names = "pcnoc-sway-clk", "audio-core",
> +                          "mclk0", "pcnoc-mport-clk",
> +                          "mi2s-bit-clk0", "mi2s-bit-clk1";
> +
> +            interrupts = <0 160 1>;
> +
> +            #sound-dai-cells = <1>;
> +
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            /* Optional to set different MI2S SD lines */
> +            mi2s-primary@0 {
> +                reg = <MI2S_PRIMARY>;
> +                qcom,playback-sd-lines = <1>;
> +                qcom,capture-sd-lines = <0>;

These 2 aren't documented.

Rob

Re: [PATCH v5 00/12] ASoC: qcom: Add support for SC7180 lpass variant

[Rohit Kumar]

Hello Mark,

Other than patch 12, there is no comment on other patches from anyone as 
of now.

[PATCH v5 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format

I will plan to post patch12 only with comments addressed if other
changes does not have any comment. Please let me know your inputs.

Thanks,
Rohit
On 8/4/2020 1:37 PM, Rohit kumar wrote:
> This patch chain add audio support for SC7180 soc by doing the required
> modification in existing common lpass-cpu/lpass-platform driver.
> This also fixes some concurrency issue.
>
> This patch series is already tested by Srinivas on Dragon Board 410c.
> Changes since v4:
>          - Updated compatible string for sc7180 lpass cpu as suggested by Rob
>          - Addressed comments by Rob in yaml Documentation.
>
> Ajit Pandey (4):
>    ASoC: qcom: Add common array to initialize soc based core clocks
>    ASoC: qcom: lpass-platform: Replace card->dev with component->dev
>    include: dt-bindings: sound: Add sc7180-lpass bindings header
>    ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio
>
> Rohit kumar (8):
>    ASoC: qcom: lpass-cpu: Move ahbix clk to platform specific function
>    ASoC: qcom: lpass-platform: fix memory leak
>    ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers
>    ASoC: qcom: lpass-cpu: fix concurrency issue
>    dt-bindings: sound: lpass-cpu: Add sc7180 lpass cpu node
>    ASoC: qcom: lpass-cpu: Use platform_get_resource
>    ASoC: qcom: lpass-platform: Use platform_get_irq
>    dt-bindings: sound: lpass-cpu: Move to yaml format
>
>   .../devicetree/bindings/sound/qcom,lpass-cpu.txt   |  79 --------
>   .../devicetree/bindings/sound/qcom,lpass-cpu.yaml  | 179 +++++++++++++++++
>   include/dt-bindings/sound/sc7180-lpass.h           |  10 +
>   sound/soc/qcom/Kconfig                             |   5 +
>   sound/soc/qcom/Makefile                            |   2 +
>   sound/soc/qcom/lpass-apq8016.c                     |  86 ++++++--
>   sound/soc/qcom/lpass-cpu.c                         | 204 ++++++++++---------
>   sound/soc/qcom/lpass-ipq806x.c                     |  67 +++++++
>   sound/soc/qcom/lpass-lpaif-reg.h                   | 157 ++++++++-------
>   sound/soc/qcom/lpass-platform.c                    | 155 +++++++++++----
>   sound/soc/qcom/lpass-sc7180.c                      | 216 +++++++++++++++++++++
>   sound/soc/qcom/lpass.h                             |  63 +++++-
>   12 files changed, 924 insertions(+), 299 deletions(-)
>   delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>   create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
>   create mode 100644 include/dt-bindings/sound/sc7180-lpass.h
>   create mode 100644 sound/soc/qcom/lpass-sc7180.c
>
-- 
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.