devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v1 0/2] Add device nodes for SC7280 SoCs
@ 2021-04-10  2:04 Taniya Das
  2021-04-10  2:04 ` [PATCH v1 1/2] arm64: dts: qcom: sc7280: Add cpufreq hw node Taniya Das
  2021-04-10  2:04 ` [PATCH v1 2/2] arm64: dts: qcom: sc7280: Add clock controller nodes Taniya Das
  0 siblings, 2 replies; 5+ messages in thread
From: Taniya Das @ 2021-04-10  2:04 UTC (permalink / raw)
  To: Rob Herring, Bjorn Andersson
  Cc: Douglas Anderson, Stephen Boyd, Andy Gross, devicetree,
	linux-arm-msm, linux-kernel, Taniya Das

Add device node for cpufreq HW and clock controllers of GPU, DISP, VIDEO, LPASS.
The clock controller nodes are dependent on the following

VIDEO/DISP/GPU: https://lkml.org/lkml/2021/3/16/1624
LPASS: https://lkml.org/lkml/2021/4/9/812

Taniya Das (2):
  arm64: dts: qcom: sc7280: Add cpufreq hw node
  arm64: dts: qcom: sc7280: Add clock controller nodes

 arch/arm64/boot/dts/qcom/sc7280.dtsi | 78 ++++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v1 1/2] arm64: dts: qcom: sc7280: Add cpufreq hw node
  2021-04-10  2:04 [PATCH v1 0/2] Add device nodes for SC7280 SoCs Taniya Das
@ 2021-04-10  2:04 ` Taniya Das
  2021-04-10  2:13   ` Stephen Boyd
  2021-04-20 21:34   ` Matthias Kaehlcke
  2021-04-10  2:04 ` [PATCH v1 2/2] arm64: dts: qcom: sc7280: Add clock controller nodes Taniya Das
  1 sibling, 2 replies; 5+ messages in thread
From: Taniya Das @ 2021-04-10  2:04 UTC (permalink / raw)
  To: Rob Herring, Bjorn Andersson
  Cc: Douglas Anderson, Stephen Boyd, Andy Gross, devicetree,
	linux-arm-msm, linux-kernel, Taniya Das

Add cpufreq HW device node to scale 4-Silver/3-Gold/1-Gold+
cores on SC7280 SoCs.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 2cc4785..cda3f2a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -70,6 +70,7 @@
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_0: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -88,6 +89,7 @@
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_100: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -103,6 +105,7 @@
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_200: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -118,6 +121,7 @@
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_300: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -133,6 +137,7 @@
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_400: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -148,6 +153,7 @@
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_500: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -163,6 +169,7 @@
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_600: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -178,6 +185,7 @@
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
 			L2_700: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -1116,6 +1124,17 @@
 				#clock-cells = <1>;
 			};
 		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,cpufreq-epss";
+			reg = <0 0x18591000 0 0x1000>,
+			      <0 0x18592000 0 0x1000>,
+			      <0 0x18593000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#freq-domain-cells = <1>;
+		};
 	};

 	timer {
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v1 2/2] arm64: dts: qcom: sc7280: Add clock controller nodes
  2021-04-10  2:04 [PATCH v1 0/2] Add device nodes for SC7280 SoCs Taniya Das
  2021-04-10  2:04 ` [PATCH v1 1/2] arm64: dts: qcom: sc7280: Add cpufreq hw node Taniya Das
@ 2021-04-10  2:04 ` Taniya Das
  1 sibling, 0 replies; 5+ messages in thread
From: Taniya Das @ 2021-04-10  2:04 UTC (permalink / raw)
  To: Rob Herring, Bjorn Andersson
  Cc: Douglas Anderson, Stephen Boyd, Andy Gross, devicetree,
	linux-arm-msm, linux-kernel, Taniya Das

Add support for the video, gpu, display, lpass clock controller
device nodes for SC7280 SoC.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 58 ++++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index cda3f2a..b59ffff 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -5,8 +5,12 @@
  * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
  */

+#include <dt-bindings/clock/qcom,dispcc-sc7280.h>
 #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+#include <dt-bindings/clock/qcom,gpucc-sc7280.h>
+#include <dt-bindings/clock/qcom,lpass-sc7280.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,videocc-sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-aoss-qmp.h>
@@ -324,6 +328,31 @@
 			};
 		};

+		lpasscc: lpasscc@3000000 {
+			compatible = "qcom,sc7280-lpasscc";
+			reg = <0 0x03000000 0 0x40>,
+			      <0 0x03c04000 0 0x4>,
+			      <0 0x03389000 0 0x24>;
+			reg-names = "qdsp6ss", "top_cc", "cc";
+			clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
+			clock-names = "iface";
+			#clock-cells = <1>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sc7280-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		stm@6002000 {
 			compatible = "arm,coresight-stm", "arm,primecell";
 			reg = <0 0x06002000 0 0x1000>,
@@ -820,6 +849,35 @@
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};

+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,sc7280-videocc";
+			reg = <0 0xaaf0000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				<&rpmhcc RPMH_CXO_CLK_A>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sc7280-dispcc";
+			reg = <0 0xaf00000 0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <0>, <0>, <0>, <0>, <0>, <0>;
+			clock-names = "bi_tcxo", "gcc_disp_gpll0_clk",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk",
+				      "edp_phy_pll_link_clk",
+				      "edp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sc7280-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>;
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v1 1/2] arm64: dts: qcom: sc7280: Add cpufreq hw node
  2021-04-10  2:04 ` [PATCH v1 1/2] arm64: dts: qcom: sc7280: Add cpufreq hw node Taniya Das
@ 2021-04-10  2:13   ` Stephen Boyd
  2021-04-20 21:34   ` Matthias Kaehlcke
  1 sibling, 0 replies; 5+ messages in thread
From: Stephen Boyd @ 2021-04-10  2:13 UTC (permalink / raw)
  To: Bjorn Andersson, Rob Herring, Taniya Das
  Cc: Douglas Anderson, Andy Gross, devicetree, linux-arm-msm,
	linux-kernel, Taniya Das

Quoting Taniya Das (2021-04-09 19:04:39)
> @@ -1116,6 +1124,17 @@
>                                 #clock-cells = <1>;
>                         };
>                 };
> +
> +               cpufreq_hw: cpufreq@18591000 {
> +                       compatible = "qcom,cpufreq-epss";
> +                       reg = <0 0x18591000 0 0x1000>,
> +                             <0 0x18592000 0 0x1000>,
> +                             <0 0x18593000 0 0x1000>;
> +                       reg-names = "freq-domain0", "freq-domain1", "freq-domain2";

The reg-names provides practically no value. Can you drop it?

> +                       clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> +                       clock-names = "xo", "alternate";
> +                       #freq-domain-cells = <1>;
> +               };
>         };
>

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v1 1/2] arm64: dts: qcom: sc7280: Add cpufreq hw node
  2021-04-10  2:04 ` [PATCH v1 1/2] arm64: dts: qcom: sc7280: Add cpufreq hw node Taniya Das
  2021-04-10  2:13   ` Stephen Boyd
@ 2021-04-20 21:34   ` Matthias Kaehlcke
  1 sibling, 0 replies; 5+ messages in thread
From: Matthias Kaehlcke @ 2021-04-20 21:34 UTC (permalink / raw)
  To: Taniya Das
  Cc: Rob Herring, Bjorn Andersson, Douglas Anderson, Stephen Boyd,
	Andy Gross, devicetree, linux-arm-msm, linux-kernel

On Sat, Apr 10, 2021 at 07:34:39AM +0530, Taniya Das wrote:
> Add cpufreq HW device node to scale 4-Silver/3-Gold/1-Gold+
> cores on SC7280 SoCs.
> 
> Signed-off-by: Taniya Das <tdas@codeaurora.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-04-20 21:34 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-10  2:04 [PATCH v1 0/2] Add device nodes for SC7280 SoCs Taniya Das
2021-04-10  2:04 ` [PATCH v1 1/2] arm64: dts: qcom: sc7280: Add cpufreq hw node Taniya Das
2021-04-10  2:13   ` Stephen Boyd
2021-04-20 21:34   ` Matthias Kaehlcke
2021-04-10  2:04 ` [PATCH v1 2/2] arm64: dts: qcom: sc7280: Add clock controller nodes Taniya Das

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).