From: Michal Simek <michal.simek@xilinx.com>
To: Michael Tretter <m.tretter@pengutronix.de>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<dmaengine@vger.kernel.org>
Cc: <robh+dt@kernel.org>, <michal.simek@xilinx.com>, <kernel@pengutronix.de>
Subject: Re: [PATCH 3/3] arm64: zynqmp: Rename dma to dma-controller
Date: Mon, 24 Jan 2022 13:18:16 +0100 [thread overview]
Message-ID: <1ec5717e-114e-8694-4ba9-43f0407a7288@xilinx.com> (raw)
In-Reply-To: <20220112151541.1328732-4-m.tretter@pengutronix.de>
On 1/12/22 16:15, Michael Tretter wrote:
> The ZynqMP dma engines are actually dma-controllers as specified by the
> device tree binding. Rename the device tree nodes accordingly.
>
> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
> ---
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 32 +++++++++++++-------------
> 1 file changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 6d96b6b99f84..3e15391e5b37 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -254,7 +254,7 @@ pmu@9000 {
> };
>
> /* GDMA */
> - fpd_dma_chan1: dma@fd500000 {
> + fpd_dma_chan1: dma-controller@fd500000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xfd500000 0x0 0x1000>;
> @@ -267,7 +267,7 @@ fpd_dma_chan1: dma@fd500000 {
> power-domains = <&zynqmp_firmware PD_GDMA>;
> };
>
> - fpd_dma_chan2: dma@fd510000 {
> + fpd_dma_chan2: dma-controller@fd510000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xfd510000 0x0 0x1000>;
> @@ -280,7 +280,7 @@ fpd_dma_chan2: dma@fd510000 {
> power-domains = <&zynqmp_firmware PD_GDMA>;
> };
>
> - fpd_dma_chan3: dma@fd520000 {
> + fpd_dma_chan3: dma-controller@fd520000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xfd520000 0x0 0x1000>;
> @@ -293,7 +293,7 @@ fpd_dma_chan3: dma@fd520000 {
> power-domains = <&zynqmp_firmware PD_GDMA>;
> };
>
> - fpd_dma_chan4: dma@fd530000 {
> + fpd_dma_chan4: dma-controller@fd530000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xfd530000 0x0 0x1000>;
> @@ -306,7 +306,7 @@ fpd_dma_chan4: dma@fd530000 {
> power-domains = <&zynqmp_firmware PD_GDMA>;
> };
>
> - fpd_dma_chan5: dma@fd540000 {
> + fpd_dma_chan5: dma-controller@fd540000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xfd540000 0x0 0x1000>;
> @@ -319,7 +319,7 @@ fpd_dma_chan5: dma@fd540000 {
> power-domains = <&zynqmp_firmware PD_GDMA>;
> };
>
> - fpd_dma_chan6: dma@fd550000 {
> + fpd_dma_chan6: dma-controller@fd550000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xfd550000 0x0 0x1000>;
> @@ -332,7 +332,7 @@ fpd_dma_chan6: dma@fd550000 {
> power-domains = <&zynqmp_firmware PD_GDMA>;
> };
>
> - fpd_dma_chan7: dma@fd560000 {
> + fpd_dma_chan7: dma-controller@fd560000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xfd560000 0x0 0x1000>;
> @@ -345,7 +345,7 @@ fpd_dma_chan7: dma@fd560000 {
> power-domains = <&zynqmp_firmware PD_GDMA>;
> };
>
> - fpd_dma_chan8: dma@fd570000 {
> + fpd_dma_chan8: dma-controller@fd570000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xfd570000 0x0 0x1000>;
> @@ -375,7 +375,7 @@ gic: interrupt-controller@f9010000 {
> * These dma channels, Users should ensure that these dma
> * Channels are allowed for non secure access.
> */
> - lpd_dma_chan1: dma@ffa80000 {
> + lpd_dma_chan1: dma-controller@ffa80000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xffa80000 0x0 0x1000>;
> @@ -388,7 +388,7 @@ lpd_dma_chan1: dma@ffa80000 {
> power-domains = <&zynqmp_firmware PD_ADMA>;
> };
>
> - lpd_dma_chan2: dma@ffa90000 {
> + lpd_dma_chan2: dma-controller@ffa90000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xffa90000 0x0 0x1000>;
> @@ -401,7 +401,7 @@ lpd_dma_chan2: dma@ffa90000 {
> power-domains = <&zynqmp_firmware PD_ADMA>;
> };
>
> - lpd_dma_chan3: dma@ffaa0000 {
> + lpd_dma_chan3: dma-controller@ffaa0000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xffaa0000 0x0 0x1000>;
> @@ -414,7 +414,7 @@ lpd_dma_chan3: dma@ffaa0000 {
> power-domains = <&zynqmp_firmware PD_ADMA>;
> };
>
> - lpd_dma_chan4: dma@ffab0000 {
> + lpd_dma_chan4: dma-controller@ffab0000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xffab0000 0x0 0x1000>;
> @@ -427,7 +427,7 @@ lpd_dma_chan4: dma@ffab0000 {
> power-domains = <&zynqmp_firmware PD_ADMA>;
> };
>
> - lpd_dma_chan5: dma@ffac0000 {
> + lpd_dma_chan5: dma-controller@ffac0000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xffac0000 0x0 0x1000>;
> @@ -440,7 +440,7 @@ lpd_dma_chan5: dma@ffac0000 {
> power-domains = <&zynqmp_firmware PD_ADMA>;
> };
>
> - lpd_dma_chan6: dma@ffad0000 {
> + lpd_dma_chan6: dma-controller@ffad0000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xffad0000 0x0 0x1000>;
> @@ -453,7 +453,7 @@ lpd_dma_chan6: dma@ffad0000 {
> power-domains = <&zynqmp_firmware PD_ADMA>;
> };
>
> - lpd_dma_chan7: dma@ffae0000 {
> + lpd_dma_chan7: dma-controller@ffae0000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xffae0000 0x0 0x1000>;
> @@ -466,7 +466,7 @@ lpd_dma_chan7: dma@ffae0000 {
> power-domains = <&zynqmp_firmware PD_ADMA>;
> };
>
> - lpd_dma_chan8: dma@ffaf0000 {
> + lpd_dma_chan8: dma-controller@ffaf0000 {
> status = "disabled";
> compatible = "xlnx,zynqmp-dma-1.0";
> reg = <0x0 0xffaf0000 0x0 0x1000>;
Applied.
M
next prev parent reply other threads:[~2022-01-24 12:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-12 15:15 [PATCH 0/3] dt-bindings: dmaengine: zynqmp_dma: Convert binding to YAML Michael Tretter
2022-01-12 15:15 ` [PATCH 1/3] dt-bindings: dmaengine: zynqmp_dma: convert to yaml Michael Tretter
2022-01-22 0:59 ` Rob Herring
2022-01-12 15:15 ` [PATCH 2/3] arm64: zynqmp: Add missing #dma-cells property Michael Tretter
2022-01-24 12:18 ` Michal Simek
2022-01-12 15:15 ` [PATCH 3/3] arm64: zynqmp: Rename dma to dma-controller Michael Tretter
2022-01-24 12:18 ` Michal Simek [this message]
2022-01-21 10:16 ` [PATCH 0/3] dt-bindings: dmaengine: zynqmp_dma: Convert binding to YAML Harini Katakam
2022-01-21 11:58 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1ec5717e-114e-8694-4ba9-43f0407a7288@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=m.tretter@pengutronix.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).