[PATCH 0/3] ARM: bcm2835: Include VC4 GPU in the DT

[PATCH 0/3] ARM: bcm2835: Include VC4 GPU in the DT

[Eric Anholt]

This has been floating around out of tree, and the Pi Foundation is
including a variant of it in the device tree overlay in its firmware
update system.

Eric Anholt (3):
  dt-bindings: Add binding docs for V3D.
  drm/vc4: Recognize a more specific compatible string for V3D.
  ARM: bcm2835: Add VC4 to the device tree.

 .../devicetree/bindings/display/brcm,bcm-vc4.txt   | 12 ++++++
 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts           |  4 ++
 arch/arm/boot/dts/bcm2835-rpi-a.dts                |  4 ++
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts           |  4 ++
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts           |  4 ++
 arch/arm/boot/dts/bcm2835-rpi-b.dts                |  4 ++
 arch/arm/boot/dts/bcm2835-rpi.dtsi                 |  9 +++++
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts              |  4 ++
 arch/arm/boot/dts/bcm283x.dtsi                     | 47 ++++++++++++++++++++++
 drivers/gpu/drm/vc4/vc4_v3d.c                      |  1 +
 10 files changed, 93 insertions(+)

-- 
2.7.0

[PATCH 1/3] dt-bindings: Add binding docs for V3D.

[Eric Anholt]

This was missed in the upstreaming process.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
index 56a961a..9f97df4 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
+++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
@@ -35,6 +35,12 @@ Optional properties for HDMI:
 		  as an interrupt/status bit in the HDMI controller
 		  itself).  See bindings/pinctrl/brcm,bcm2835-gpio.txt
 
+Required properties for V3D:
+- compatible:	Should be "brcm,bcm2835-v3d"
+- reg:		Physical base address and length of the V3D's registers
+- interrupts:	The interrupt number
+		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+
 Example:
 pixelvalve@7e807000 {
 	compatible = "brcm,bcm2835-pixelvalve2";
@@ -60,6 +66,12 @@ hdmi: hdmi@7e902000 {
 	clock-names = "pixel", "hdmi";
 };
 
+v3d: v3d@7ec00000 {
+	compatible = "brcm,bcm2835-v3d";
+	reg = <0x7ec00000 0x1000>;
+	interrupts = <1 10>;
+};
+
 vc4: gpu {
 	compatible = "brcm,bcm2835-vc4";
 };
-- 
2.7.0

[PATCH 2/3] drm/vc4: Recognize a more specific compatible string for V3D.

[Eric Anholt]

The Raspberry Pi Foundation's firmware updates are shipping device
trees using the old string, so we'll keep recognizing that as this rev
of V3D.  Still, we should use a more specific name in the upstream DT
to clarify which board is being supported, in case we do other revs of
V3D in the future.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/vc4/vc4_v3d.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/vc4/vc4_v3d.c b/drivers/gpu/drm/vc4/vc4_v3d.c
index 31de5d1..e6d3c60 100644
--- a/drivers/gpu/drm/vc4/vc4_v3d.c
+++ b/drivers/gpu/drm/vc4/vc4_v3d.c
@@ -268,6 +268,7 @@ static int vc4_v3d_dev_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id vc4_v3d_dt_match[] = {
+	{ .compatible = "brcm,bcm2835-v3d" },
 	{ .compatible = "brcm,vc4-v3d" },
 	{}
 };
-- 
2.7.0

[PATCH 3/3] ARM: bcm2835: Add VC4 to the device tree.

[Eric Anholt]

VC4 is the GPU (display and 3D) present on the 283x.

Signed-off-by: Eric Anholt <eric@anholt.net>
---

v2: Sort by register address, mark HDMI as disabled by default in the
    SoC file and enable it from -rpi.
v3: Add references to the pixel/HSM clocks for HDMI.  Rename
    compatibility strings and clean up node names.
v4: Fix comment marking pv0's interrupt as pwa2 instead of pwa0.
    Rename hpd-gpio to hpd-gpios.
v5: Rebase on bcm283x.dtsi change, add v3d.
v6: Make HDMI reference the power domain.
v7: Fix the HDMI HPD gpios active value and HDMI enable for each RPI
    board.  Change V3D compatible string to 2835.

 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts |  4 +++
 arch/arm/boot/dts/bcm2835-rpi-a.dts      |  4 +++
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts |  4 +++
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts |  4 +++
 arch/arm/boot/dts/bcm2835-rpi-b.dts      |  4 +++
 arch/arm/boot/dts/bcm2835-rpi.dtsi       |  9 ++++++
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts    |  4 +++
 arch/arm/boot/dts/bcm283x.dtsi           | 47 ++++++++++++++++++++++++++++++++
 8 files changed, 80 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 228614f..35ff4e7a 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -29,3 +29,7 @@
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
 };
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index ddbbbbd..306a84e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -22,3 +22,7 @@
 		brcm,function = <BCM2835_FSEL_ALT2>;
 	};
 };
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index ef54050..57d313b 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -29,3 +29,7 @@
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
 };
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 86f1f2f..cf2774e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -22,3 +22,7 @@
 		brcm,function = <BCM2835_FSEL_ALT2>;
 	};
 };
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 4859e9d..8b15f9c 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -16,3 +16,7 @@
 &gpio {
 	pinctrl-0 = <&gpioout &alt0 &alt3>;
 };
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 76bdbca..caf2707 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -74,3 +74,12 @@
 &usb {
 	power-domains = <&power RPI_POWER_DOMAIN_USB>;
 };
+
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
+
+&hdmi {
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index ff94666..c4743f4 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -33,3 +33,7 @@
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
 };
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 8aaf193..31cc2f2 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -1,6 +1,7 @@
 #include <dt-bindings/pinctrl/bcm2835.h>
 #include <dt-bindings/clock/bcm2835.h>
 #include <dt-bindings/clock/bcm2835-aux.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "skeleton.dtsi"
 
 /* This include file covers the common peripherals and configuration between
@@ -153,6 +154,18 @@
 			status = "disabled";
 		};
 
+		pixelvalve@7e206000 {
+			compatible = "brcm,bcm2835-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <2 13>; /* pwa0 */
+		};
+
+		pixelvalve@7e207000 {
+			compatible = "brcm,bcm2835-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <2 14>; /* pwa1 */
+		};
+
 		aux: aux@0x7e215000 {
 			compatible = "brcm,bcm2835-aux";
 			#clock-cells = <1>;
@@ -206,6 +219,12 @@
 			status = "disabled";
 		};
 
+		hvs@7e400000 {
+			compatible = "brcm,bcm2835-hvs";
+			reg = <0x7e400000 0x6000>;
+			interrupts = <2 1>;
+		};
+
 		i2c1: i2c@7e804000 {
 			compatible = "brcm,bcm2835-i2c";
 			reg = <0x7e804000 0x1000>;
@@ -226,11 +245,39 @@
 			status = "disabled";
 		};
 
+		pixelvalve@7e807000 {
+			compatible = "brcm,bcm2835-pixelvalve2";
+			reg = <0x7e807000 0x100>;
+			interrupts = <2 10>; /* pixelvalve */
+		};
+
+		hdmi: hdmi@7e902000 {
+			compatible = "brcm,bcm2835-hdmi";
+			reg = <0x7e902000 0x600>,
+			      <0x7e808000 0x100>;
+			interrupts = <2 8>, <2 9>;
+			ddc = <&i2c2>;
+			clocks = <&clocks BCM2835_PLLH_PIX>,
+				 <&clocks BCM2835_CLOCK_HSM>;
+			clock-names = "pixel", "hdmi";
+			status = "disabled";
+		};
+
 		usb: usb@7e980000 {
 			compatible = "brcm,bcm2835-usb";
 			reg = <0x7e980000 0x10000>;
 			interrupts = <1 9>;
 		};
+
+		v3d: v3d@7ec00000 {
+			compatible = "brcm,bcm2835-v3d";
+			reg = <0x7ec00000 0x1000>;
+			interrupts = <1 10>;
+		};
+
+		vc4: gpu {
+			compatible = "brcm,bcm2835-vc4";
+		};
 	};
 
 	clocks {
-- 
2.7.0

Re: [PATCH 3/3] ARM: bcm2835: Add VC4 to the device tree.

[Stephen Warren]

On 03/04/2016 01:32 PM, Eric Anholt wrote:
> VC4 is the GPU (display and 3D) present on the 283x.

> diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts

> +&hdmi {
> +	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
> +};

Isn't that the same everywhere? If so, adding it to bcm2835-rpi.dtsi 
seems like a better idea; it'd avoid duplicating it everywhere.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/3] ARM: bcm2835: Add VC4 to the device tree.

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 589 bytes --]

Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> writes:

> On 03/04/2016 01:32 PM, Eric Anholt wrote:
>> VC4 is the GPU (display and 3D) present on the 283x.
>
>> diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
>
>> +&hdmi {
>> +	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
>> +};
>
> Isn't that the same everywhere? If so, adding it to bcm2835-rpi.dtsi 
> seems like a better idea; it'd avoid duplicating it everywhere.

It's not the same everywhere (_HIGH vs _LOW), which is why it's in the
individual files.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]

Re: [PATCH 3/3] ARM: bcm2835: Add VC4 to the device tree.

[Stephen Warren]

On 03/08/2016 11:04 AM, Eric Anholt wrote:
> Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> writes:
>
>> On 03/04/2016 01:32 PM, Eric Anholt wrote:
>>> VC4 is the GPU (display and 3D) present on the 283x.
>>
>>> diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
>>
>>> +&hdmi {
>>> +	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
>>> +};
>>
>> Isn't that the same everywhere? If so, adding it to bcm2835-rpi.dtsi
>> seems like a better idea; it'd avoid duplicating it everywhere.
>
> It's not the same everywhere (_HIGH vs _LOW), which is why it's in the
> individual files.

Oh right, it looks OK then. The series,
Acked-by: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>

One could reduce the duplication by moving the common block into the 
common .dtsi file, but using a board-defined #define for the polarity:

bcm2835-rpi-a-plus.dts:

#define RPI_HDMI_HPD_POLARITY
#include "bcm2835-rpi.dtsi"

bcm2835-rpi.dtsi:

&hdmi {
	hpd-gpios = <&gpio 46 RPI_HDMI_HPD_POLARITY>;
};

... although this case is so tiny I'm not sure there's any benefit 
trying to unify it like that right now.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] dt-bindings: Add binding docs for V3D.

[Rob Herring]

On Fri, Mar 04, 2016 at 12:32:06PM -0800, Eric Anholt wrote:
> This was missed in the upstreaming process.
> 
> Signed-off-by: Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 12 ++++++++++++
>  1 file changed, 12 insertions(+)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html