From: megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org
To: dev-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Ondrej Jirman <megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
open list <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH v2 12/14] ARM: dts: sun8i: Setup CPU operating points for Onrage PI PC
Date: Sat, 25 Jun 2016 05:45:09 +0200 [thread overview]
Message-ID: <20160625034511.7966-13-megous@megous.com> (raw)
In-Reply-To: <20160625034511.7966-1-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
From: Ondrej Jirman <megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
Orange PI PC uses SY8106A regulator for fine grained CPUX voltage
regulation. Setup appropriate operating points for the board.
---
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 48 ++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index 79f0b49..1b029e9 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -90,6 +90,54 @@
};
};
+&cpu0 {
+ operating-points = <
+ /* kHz uV */
+ 1512000 1400000
+ 1440000 1400000
+ 1368000 1340000
+ 1344000 1340000
+ 1296000 1340000
+ 1248000 1300000
+ 1224000 1300000
+ 1200000 1300000
+ 1104000 1200000
+ 1008000 1140000
+ 960000 1100000
+ 648000 1100000
+ 480000 1100000
+ 240000 1100000
+ 120000 1100000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <14>;
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&cpu_thermal {
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 (-1) (-1)>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+};
+
&r_twi {
status = "okay";
--
2.9.0
next prev parent reply other threads:[~2016-06-25 3:45 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20160625034511.7966-1-megous@megous.com>
[not found] ` <20160625034511.7966-1-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-25 3:44 ` [PATCH v2 01/14] ARM: clk: sunxi: Add driver for the H3 THS clock megous-5qf/QAjKc83QT0dZR+AlfA
[not found] ` <20160625034511.7966-2-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-25 7:13 ` Maxime Ripard
2016-06-25 15:23 ` Ondřej Jirman
[not found] ` <6a37450f-35fe-3296-da4b-10f7d645e2b9-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-28 11:52 ` Maxime Ripard
2016-06-25 3:45 ` [PATCH v2 03/14] dt-bindings: document sun8i_ths - H3 thermal sensor driver megous-5qf/QAjKc83QT0dZR+AlfA
[not found] ` <20160625034511.7966-4-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-28 20:56 ` Rob Herring
2016-06-25 3:45 ` [PATCH v2 05/14] dt-bindings: document SY8106A regulator driver megous-5qf/QAjKc83QT0dZR+AlfA
[not found] ` <20160625034511.7966-6-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-26 11:27 ` Mark Brown
[not found] ` <20160626112720.GL28202-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2016-06-26 15:10 ` Ondřej Jirman
[not found] ` <e8508fa7-bd98-9171-0c9a-59e059573692-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-26 18:52 ` Mark Brown
2016-06-25 3:45 ` [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method megous-5qf/QAjKc83QT0dZR+AlfA
[not found] ` <20160625034511.7966-7-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-30 20:40 ` Maxime Ripard
2016-07-01 0:50 ` Ondřej Jirman
2016-07-01 5:37 ` Jean-Francois Moine
[not found] ` <20160701073710.1a1fc684ae448577bad5b0db-GANU6spQydw@public.gmane.org>
2016-07-01 6:34 ` Ondřej Jirman
[not found] ` <643c2648-ddd6-700a-68c0-2981134965c0-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-07-01 7:47 ` Jean-Francois Moine
[not found] ` <0b71ed7e-98c9-109e-85e6-ceb95131d88a-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-07-15 8:53 ` Maxime Ripard
2016-07-15 10:38 ` Ondřej Jirman
2016-07-15 13:27 ` Jean-Francois Moine
[not found] ` <20160715152756.db7375a7109fed18c2fbf43a-GANU6spQydw@public.gmane.org>
2016-07-15 13:48 ` Ondřej Jirman
2016-07-15 14:22 ` [linux-sunxi] " Michal Suchanek
2016-07-15 16:33 ` Ondřej Jirman
2016-07-21 9:51 ` Maxime Ripard
[not found] ` <085e185a-ac76-dd3f-9b0e-a7dc9c0c09f3-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-07-21 9:48 ` Maxime Ripard
2016-07-21 9:52 ` Ondřej Jirman
2016-07-26 6:32 ` Maxime Ripard
2016-07-28 11:27 ` Changed: sunxi-ng clock code - NKMP clock implementation is wrong Ondřej Jirman
2016-07-28 11:38 ` [linux-sunxi] " Chen-Yu Tsai
[not found] ` <e1b8127f-c422-46ab-384b-aeee85aa940b-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-07-28 21:00 ` Maxime Ripard
2016-07-28 22:01 ` Ondřej Jirman
[not found] ` <7c5f2835-f044-7c18-def9-52af5ce4afc3-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-07-31 10:31 ` Maxime Ripard
2016-07-31 22:01 ` Ondřej Jirman
[not found] ` <9175af7e-e1b1-df88-de2b-16f0e8d719c1-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-08-31 20:25 ` Maxime Ripard
2016-07-01 0:53 ` [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method Ondřej Jirman
[not found] ` <64d0c1e2-d818-0806-7c92-c10603b4f6f5-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-07-15 8:19 ` Maxime Ripard
2016-06-25 3:45 ` [PATCH v2 07/14] ARM: dts: sun8i: Use sun8i-h3-pll1-clk for pll1 in H3 megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25 3:45 ` [PATCH v2 08/14] ARM: dts: sun8i: Add thermal sensor node to the sun8i-h3.dtsi megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25 3:45 ` [PATCH v2 09/14] ARM: dts: sun8i: Add cpu0 label to sun8i-h3.dtsi megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25 3:45 ` [PATCH v2 10/14] ARM: dts: sun8i: Add r_twi I2C controller megous-5qf/QAjKc83QT0dZR+AlfA
[not found] ` <20160625034511.7966-11-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-25 7:16 ` Maxime Ripard
2016-06-25 3:45 ` [PATCH v2 11/14] ARM: dts: sun8i: Add sy8106a regulator to Orange Pi PC megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25 3:45 ` megous-5qf/QAjKc83QT0dZR+AlfA [this message]
2016-06-25 3:45 ` [PATCH v2 13/14] ARM: dts: sun8i: Add gpio-regulator used on Orange Pi One megous-5qf/QAjKc83QT0dZR+AlfA
[not found] ` <20160625034511.7966-14-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-25 7:18 ` Maxime Ripard
2016-06-25 3:45 ` [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS " megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-30 11:13 ` [linux-sunxi] " Michal Suchanek
[not found] ` <CAOMqctTe==M1SXxbdR8y33yh51fiFGn+oSaKJXhbnpLVTn-New-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-06-30 14:19 ` Ondřej Jirman
[not found] ` <834b8045-d99f-74a3-0353-aa84b897351d-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-30 15:16 ` Michal Suchanek
[not found] ` <CAOMqctSbJOB67a=LiCZVUb-wUMCpeJPd81OL5epYkC2p5X1T-g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-06-30 15:32 ` Ondřej Jirman
2016-06-30 15:50 ` Michal Suchanek
[not found] ` <CAOMqctR+SBfo9UZxXuACz858ehXpa2jGHZw_-70dbUFX3Q_0CQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-06-30 15:53 ` Ondřej Jirman
2016-07-01 10:54 ` Michal Suchanek
2016-06-30 14:23 ` Siarhei Siamashka
2016-07-01 1:17 ` Ondřej Jirman
2016-07-22 0:41 ` Ondřej Jirman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160625034511.7966-13-megous@megous.com \
--to=megous-5qf/qajkc83qt0dzr+alfa@public.gmane.org \
--cc=dev-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).