devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Ondřej Jirman" <megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
To: Michal Suchanek <hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: dev <dev-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org>,
	"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
	<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	open list <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS on Orange Pi One
Date: Thu, 30 Jun 2016 16:19:34 +0200	[thread overview]
Message-ID: <834b8045-d99f-74a3-0353-aa84b897351d@megous.com> (raw)
In-Reply-To: <CAOMqctTe==M1SXxbdR8y33yh51fiFGn+oSaKJXhbnpLVTn-New-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>


[-- Attachment #1.1: Type: text/plain, Size: 1897 bytes --]

Hello,

On 30.6.2016 13:13, Michal Suchanek wrote:
> Hello,
> 
> On 25 June 2016 at 05:45,  <megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org> wrote:
>> From: Ondrej Jirman <megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
>>
>> Use Xulong Orange Pi One GPIO based regulator for
>> passive cooling and thermal management.
>>
>> Signed-off-by: Ondrej Jirman <megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
>> ---
>>  arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 39 +++++++++++++++++++++++++++++
>>  1 file changed, 39 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
>> index b1bd6b0..a38d871 100644
>> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
>> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
>> @@ -109,6 +109,45 @@
>>         };
>>  };
>>
>> +&cpu0 {
>> +       operating-points = <
>> +               /* kHz    uV */
>> +               1296000 1300000
>> +               1200000 1300000
> 
> First problem is that the board boots at 1008000 which is not listed
> and the kernel complains.
> 
> Second problem is that the board locks up during boot with this enabled.
> 
> Do you have some suggestion for alternate configuration to test?

Just to verify, did you test with the entire series applied? (especially
the PLL1 clk application changes)

You may try dropping the highest operating point, it's probably overly
optimistic for Orange Pi One.

Is the power supply/cable you're using hard enough?

Where during the boot process does it lock up?

regards,
  Ondrej

> Thanks
> 
> Michal
> 

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  parent reply	other threads:[~2016-06-30 14:19 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20160625034511.7966-1-megous@megous.com>
     [not found] ` <20160625034511.7966-1-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-25  3:44   ` [PATCH v2 01/14] ARM: clk: sunxi: Add driver for the H3 THS clock megous-5qf/QAjKc83QT0dZR+AlfA
     [not found]     ` <20160625034511.7966-2-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-25  7:13       ` Maxime Ripard
2016-06-25 15:23         ` Ondřej Jirman
     [not found]           ` <6a37450f-35fe-3296-da4b-10f7d645e2b9-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-28 11:52             ` Maxime Ripard
2016-06-25  3:45   ` [PATCH v2 03/14] dt-bindings: document sun8i_ths - H3 thermal sensor driver megous-5qf/QAjKc83QT0dZR+AlfA
     [not found]     ` <20160625034511.7966-4-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-28 20:56       ` Rob Herring
2016-06-25  3:45   ` [PATCH v2 05/14] dt-bindings: document SY8106A regulator driver megous-5qf/QAjKc83QT0dZR+AlfA
     [not found]     ` <20160625034511.7966-6-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-26 11:27       ` Mark Brown
     [not found]         ` <20160626112720.GL28202-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2016-06-26 15:10           ` Ondřej Jirman
     [not found]             ` <e8508fa7-bd98-9171-0c9a-59e059573692-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-26 18:52               ` Mark Brown
2016-06-25  3:45   ` [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method megous-5qf/QAjKc83QT0dZR+AlfA
     [not found]     ` <20160625034511.7966-7-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-30 20:40       ` Maxime Ripard
2016-07-01  0:50         ` Ondřej Jirman
2016-07-01  5:37           ` Jean-Francois Moine
     [not found]             ` <20160701073710.1a1fc684ae448577bad5b0db-GANU6spQydw@public.gmane.org>
2016-07-01  6:34               ` Ondřej Jirman
     [not found]                 ` <643c2648-ddd6-700a-68c0-2981134965c0-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-07-01  7:47                   ` Jean-Francois Moine
     [not found]           ` <0b71ed7e-98c9-109e-85e6-ceb95131d88a-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-07-15  8:53             ` Maxime Ripard
2016-07-15 10:38               ` Ondřej Jirman
2016-07-15 13:27                 ` Jean-Francois Moine
     [not found]                   ` <20160715152756.db7375a7109fed18c2fbf43a-GANU6spQydw@public.gmane.org>
2016-07-15 13:48                     ` Ondřej Jirman
2016-07-15 14:22                       ` [linux-sunxi] " Michal Suchanek
2016-07-15 16:33                         ` Ondřej Jirman
2016-07-21  9:51                     ` Maxime Ripard
     [not found]                 ` <085e185a-ac76-dd3f-9b0e-a7dc9c0c09f3-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-07-21  9:48                   ` Maxime Ripard
2016-07-21  9:52                     ` Ondřej Jirman
2016-07-26  6:32                       ` Maxime Ripard
2016-07-28 11:27                         ` Changed: sunxi-ng clock code - NKMP clock implementation is wrong Ondřej Jirman
2016-07-28 11:38                           ` [linux-sunxi] " Chen-Yu Tsai
     [not found]                           ` <e1b8127f-c422-46ab-384b-aeee85aa940b-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-07-28 21:00                             ` Maxime Ripard
2016-07-28 22:01                               ` Ondřej Jirman
     [not found]                                 ` <7c5f2835-f044-7c18-def9-52af5ce4afc3-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-07-31 10:31                                   ` Maxime Ripard
2016-07-31 22:01                                     ` Ondřej Jirman
     [not found]                                       ` <9175af7e-e1b1-df88-de2b-16f0e8d719c1-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-08-31 20:25                                         ` Maxime Ripard
2016-07-01  0:53         ` [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method Ondřej Jirman
     [not found]           ` <64d0c1e2-d818-0806-7c92-c10603b4f6f5-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-07-15  8:19             ` Maxime Ripard
2016-06-25  3:45   ` [PATCH v2 07/14] ARM: dts: sun8i: Use sun8i-h3-pll1-clk for pll1 in H3 megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  3:45   ` [PATCH v2 08/14] ARM: dts: sun8i: Add thermal sensor node to the sun8i-h3.dtsi megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  3:45   ` [PATCH v2 09/14] ARM: dts: sun8i: Add cpu0 label to sun8i-h3.dtsi megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  3:45   ` [PATCH v2 10/14] ARM: dts: sun8i: Add r_twi I2C controller megous-5qf/QAjKc83QT0dZR+AlfA
     [not found]     ` <20160625034511.7966-11-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-25  7:16       ` Maxime Ripard
2016-06-25  3:45   ` [PATCH v2 11/14] ARM: dts: sun8i: Add sy8106a regulator to Orange Pi PC megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  3:45   ` [PATCH v2 12/14] ARM: dts: sun8i: Setup CPU operating points for Onrage PI PC megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-25  3:45   ` [PATCH v2 13/14] ARM: dts: sun8i: Add gpio-regulator used on Orange Pi One megous-5qf/QAjKc83QT0dZR+AlfA
     [not found]     ` <20160625034511.7966-14-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-25  7:18       ` Maxime Ripard
2016-06-25  3:45   ` [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS " megous-5qf/QAjKc83QT0dZR+AlfA
2016-06-30 11:13     ` [linux-sunxi] " Michal Suchanek
     [not found]       ` <CAOMqctTe==M1SXxbdR8y33yh51fiFGn+oSaKJXhbnpLVTn-New-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-06-30 14:19         ` Ondřej Jirman [this message]
     [not found]           ` <834b8045-d99f-74a3-0353-aa84b897351d-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>
2016-06-30 15:16             ` Michal Suchanek
     [not found]               ` <CAOMqctSbJOB67a=LiCZVUb-wUMCpeJPd81OL5epYkC2p5X1T-g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-06-30 15:32                 ` Ondřej Jirman
2016-06-30 15:50                 ` Michal Suchanek
     [not found]                   ` <CAOMqctR+SBfo9UZxXuACz858ehXpa2jGHZw_-70dbUFX3Q_0CQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-06-30 15:53                     ` Ondřej Jirman
2016-07-01 10:54                     ` Michal Suchanek
2016-06-30 14:23         ` Siarhei Siamashka
2016-07-01  1:17           ` Ondřej Jirman
2016-07-22  0:41         ` Ondřej Jirman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=834b8045-d99f-74a3-0353-aa84b897351d@megous.com \
    --to=megous-5qf/qajkc83qt0dzr+alfa@public.gmane.org \
    --cc=dev-3kdeTeqwOZ9EV1b7eY7vFQ@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=hramrach-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=wens-jdAy2FN1RRM@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).