* [PATCH 01/10] Documentation: dt-bindings: mailbox: tegra: Add binding for HSP mailbox
2016-06-27 9:02 [PATCH 00/10] arm64: tegra: add BPMP support Joseph Lo
@ 2016-06-27 9:02 ` Joseph Lo
[not found] ` <20160627090248.23621-2-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-06-27 9:02 ` [PATCH 02/10] mailbox: tegra-hsp: Add HSP(Hardware Synchronization Primitives) driver Joseph Lo
` (6 subsequent siblings)
7 siblings, 1 reply; 21+ messages in thread
From: Joseph Lo @ 2016-06-27 9:02 UTC (permalink / raw)
To: Stephen Warren, Thierry Reding, Alexandre Courbot
Cc: linux-tegra, linux-arm-kernel, Rob Herring, Mark Rutland,
Peter De Schrijver, Matthew Longnecker, devicetree, Jassi Brar,
linux-kernel, Catalin Marinas, Will Deacon, Joseph Lo
Add DT binding for the Hardware Synchronization Primitives (HSP). The
HSP is designed for the processors to share resources and communicate
together. It provides a set of hardware synchronization primitives for
interprocessor communication. So the interprocessor communication (IPC)
protocols can use hardware synchronization primitive, when operating
between two processors not in an SMP relationship.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
---
.../bindings/mailbox/nvidia,tegra186-hsp.txt | 42 ++++++++++++++++++++++
include/dt-bindings/mailbox/tegra-hsp.h | 20 +++++++++++
2 files changed, 62 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
create mode 100644 include/dt-bindings/mailbox/tegra-hsp.h
diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
new file mode 100644
index 000000000000..ca07af2d951e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
@@ -0,0 +1,42 @@
+NVIDIA Tegra Hardware Synchronization Primitives (HSP)
+
+The HSP modules are used for the processors to share resources and communicate
+together. It provides a set of hardware synchronization primitives for
+interprocessor communication. So the interprocessor communication (IPC)
+protocols can use hardware synchronization primitives, when operating between
+two processors not in an SMP relationship.
+
+The features that HSP supported are shared mailboxes, shared semaphores,
+arbitrated semaphores and doorbells.
+
+Required properties:
+- name : Should be hsp
+- compatible : Should be "nvidia,tegra<chip>-hsp"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain the HSP interrupts
+- interrupt-names: Should contain the names of the HSP interrupts that the
+ client are using.
+ "doorbell"
+- nvidia,hsp-function : Specifies one of the HSP functions that the HSP unit
+ will be supported. The function ID can be found in the
+ header file <dt-bindings/mailbox/tegra-hsp.h>.
+- #mbox-cells : Should be 1. Specifies the HSP master that will be enabled of
+ the HSP client. The master ID constants can be found in the
+ header file <dt-bindings/mailbox/tegra-hsp.h>.
+
+Example:
+
+hsp_top: hsp@3c00000 {
+ compatible = "nvidia,tegra186-hsp";
+ reg = <0x0 0x03c00000 0x0 0xa0000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "doorbell";
+ nvidia,hsp-function = <HSP_DOORBELL>;
+ #mbox-cells = <1>;
+};
+
+bpmp@d0000000 {
+ ...
+ mboxes = <&hsp_top HSP_DB_MASTER_BPMP>;
+ ...
+};
diff --git a/include/dt-bindings/mailbox/tegra-hsp.h b/include/dt-bindings/mailbox/tegra-hsp.h
new file mode 100644
index 000000000000..720c66784b72
--- /dev/null
+++ b/include/dt-bindings/mailbox/tegra-hsp.h
@@ -0,0 +1,20 @@
+/*
+ * This header provides constants for binding nvidia,tegra<chip>-hsp.
+ *
+ * The number with HSP_DB_MASTER prefix indicates the bit that is
+ * associated with a master ID in the doorbell registers.
+ */
+
+
+#ifndef _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H
+#define _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H
+
+#define HSP_SHARED_MAILBOX 0
+#define HSP_SHARED_SEMAPHORE 1
+#define HSP_ARBITRATED_SEMAPHORE 2
+#define HSP_DOORBELL 3
+
+#define HSP_DB_MASTER_CCPLEX 17
+#define HSP_DB_MASTER_BPMP 19
+
+#endif /* _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H */
--
2.9.0
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH 02/10] mailbox: tegra-hsp: Add HSP(Hardware Synchronization Primitives) driver
2016-06-27 9:02 [PATCH 00/10] arm64: tegra: add BPMP support Joseph Lo
2016-06-27 9:02 ` [PATCH 01/10] Documentation: dt-bindings: mailbox: tegra: Add binding for HSP mailbox Joseph Lo
@ 2016-06-27 9:02 ` Joseph Lo
2016-06-27 9:02 ` [PATCH 03/10] Documentation: dt-bindings: firmware: tegra: add bindings of the BPMP Joseph Lo
` (5 subsequent siblings)
7 siblings, 0 replies; 21+ messages in thread
From: Joseph Lo @ 2016-06-27 9:02 UTC (permalink / raw)
To: Stephen Warren, Thierry Reding, Alexandre Courbot
Cc: linux-tegra, linux-arm-kernel, Rob Herring, Mark Rutland,
Peter De Schrijver, Matthew Longnecker, devicetree, Jassi Brar,
linux-kernel, Catalin Marinas, Will Deacon, Joseph Lo
The Tegra HSP mailbox driver implements the signaling doorbell-based
interprocessor communication (IPC) for remote processors currently. The
HSP HW modules support some different features for that, which are
shared mailboxes, shared semaphores, arbitrated semaphores, and
doorbells. And there are multiple HSP HW instances on the chip. So the
driver is extendable to support more features for different IPC
requirement.
The driver of remote processor can use it as a mailbox client and deal
with the IPC protocol to synchronize the data communications.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
---
drivers/mailbox/Kconfig | 9 ++
drivers/mailbox/Makefile | 2 +
drivers/mailbox/tegra-hsp.c | 306 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 317 insertions(+)
create mode 100644 drivers/mailbox/tegra-hsp.c
diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
index 5305923752d2..fe584cb54720 100644
--- a/drivers/mailbox/Kconfig
+++ b/drivers/mailbox/Kconfig
@@ -114,6 +114,15 @@ config MAILBOX_TEST
Test client to help with testing new Controller driver
implementations.
+config TEGRA_HSP_MBOX
+ bool "Tegra HSP(Hardware Synchronization Primitives) Driver"
+ depends on ARCH_TEGRA_186_SOC
+ help
+ The Tegra HSP driver is used for the interprocessor communication
+ between different remote processors and host processors on Tegra186
+ and later SoCs. Say Y here if you want to have this support.
+ If unsure say N.
+
config XGENE_SLIMPRO_MBOX
tristate "APM SoC X-Gene SLIMpro Mailbox Controller"
depends on ARCH_XGENE
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 0be3e742bb7d..26d8f91c7fea 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -25,3 +25,5 @@ obj-$(CONFIG_TI_MESSAGE_MANAGER) += ti-msgmgr.o
obj-$(CONFIG_XGENE_SLIMPRO_MBOX) += mailbox-xgene-slimpro.o
obj-$(CONFIG_HI6220_MBOX) += hi6220-mailbox.o
+
+obj-${CONFIG_TEGRA_HSP_MBOX} += tegra-hsp.o
diff --git a/drivers/mailbox/tegra-hsp.c b/drivers/mailbox/tegra-hsp.c
new file mode 100644
index 000000000000..85bf5372681d
--- /dev/null
+++ b/drivers/mailbox/tegra-hsp.c
@@ -0,0 +1,306 @@
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mailbox_controller.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/mailbox/tegra-hsp.h>
+
+#define HSP_INT_DIMENSIONING 0x380
+#define HSP_nSM_OFFSET 0
+#define HSP_nSS_OFFSET 4
+#define HSP_nAS_OFFSET 8
+#define HSP_nDB_OFFSET 12
+#define HSP_nSI_OFFSET 16
+#define HSP_nINT_MASK 0xf
+
+#define HSP_DB_REG_TRIGGER 0x0
+#define HSP_DB_REG_ENABLE 0x4
+#define HSP_DB_REG_RAW 0x8
+#define HSP_DB_REG_PENDING 0xc
+
+#define HSP_DB_CCPLEX 1
+#define HSP_DB_BPMP 3
+
+#define MAX_NUM_HSP_CHAN 32
+#define MAX_NUM_HSP_DB 7
+
+#define hsp_db_offset(i, d) \
+ (d->base + ((1 + (d->nr_sm >> 1) + d->nr_ss + d->nr_as) << 16) + \
+ (i) * 0x100)
+
+struct tegra_hsp_db_chan {
+ int master_id;
+ int db_id;
+};
+
+struct tegra_hsp_mbox {
+ struct mbox_controller *db_mbox;
+ void __iomem *base;
+ void __iomem *db_base[MAX_NUM_HSP_DB];
+ int nr_sm;
+ int nr_as;
+ int nr_ss;
+ int nr_db;
+ int nr_si;
+ spinlock_t lock;
+};
+
+static inline u32 hsp_readl(void __iomem *base, int reg)
+{
+ return readl(base + reg);
+}
+
+static inline void hsp_writel(void __iomem *base, int reg, u32 val)
+{
+ writel(val, base + reg);
+ readl(base + reg);
+}
+
+static int hsp_db_can_ring(void __iomem *db_base)
+{
+ u32 reg;
+
+ reg = hsp_readl(db_base, HSP_DB_REG_ENABLE);
+
+ return !!(reg & BIT(HSP_DB_MASTER_CCPLEX));
+}
+
+static irqreturn_t hsp_db_irq(int irq, void *p)
+{
+ struct tegra_hsp_mbox *hsp_mbox = p;
+ ulong val;
+ int master_id;
+
+ val = (ulong)hsp_readl(hsp_mbox->db_base[HSP_DB_CCPLEX],
+ HSP_DB_REG_PENDING);
+ hsp_writel(hsp_mbox->db_base[HSP_DB_CCPLEX], HSP_DB_REG_PENDING, val);
+
+ spin_lock(&hsp_mbox->lock);
+ for_each_set_bit(master_id, &val, MAX_NUM_HSP_CHAN) {
+ struct mbox_chan *chan = &hsp_mbox->db_mbox->chans[master_id];
+ struct tegra_hsp_db_chan *db_chan = chan->con_priv;
+
+ if (master_id == db_chan->master_id)
+ mbox_chan_received_data(chan, NULL);
+ }
+ spin_unlock(&hsp_mbox->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int hsp_db_send_data(struct mbox_chan *chan, void *data)
+{
+ struct tegra_hsp_db_chan *db_chan = chan->con_priv;
+ struct tegra_hsp_mbox *hsp_mbox = dev_get_drvdata(chan->mbox->dev);
+
+ hsp_writel(hsp_mbox->db_base[db_chan->db_id], HSP_DB_REG_TRIGGER, 1);
+
+ return 0;
+}
+
+static int hsp_db_startup(struct mbox_chan *chan)
+{
+ struct tegra_hsp_db_chan *db_chan = chan->con_priv;
+ struct tegra_hsp_mbox *hsp_mbox = dev_get_drvdata(chan->mbox->dev);
+ u32 val;
+ unsigned long flag;
+
+ if (db_chan->master_id >= MAX_NUM_HSP_CHAN) {
+ dev_err(chan->mbox->dev, "invalid HSP chan: master ID: %d\n",
+ db_chan->master_id);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&hsp_mbox->lock, flag);
+ val = hsp_readl(hsp_mbox->db_base[HSP_DB_CCPLEX], HSP_DB_REG_ENABLE);
+ val |= BIT(db_chan->master_id);
+ hsp_writel(hsp_mbox->db_base[HSP_DB_CCPLEX], HSP_DB_REG_ENABLE, val);
+ spin_unlock_irqrestore(&hsp_mbox->lock, flag);
+
+ if (!hsp_db_can_ring(hsp_mbox->db_base[db_chan->db_id]))
+ return -ENODEV;
+
+ return 0;
+}
+
+static void hsp_db_shutdown(struct mbox_chan *chan)
+{
+ struct tegra_hsp_db_chan *db_chan = chan->con_priv;
+ struct tegra_hsp_mbox *hsp_mbox = dev_get_drvdata(chan->mbox->dev);
+ u32 val;
+ unsigned long flag;
+
+ spin_lock_irqsave(&hsp_mbox->lock, flag);
+ val = hsp_readl(hsp_mbox->db_base[HSP_DB_CCPLEX], HSP_DB_REG_ENABLE);
+ val &= ~BIT(db_chan->master_id);
+ hsp_writel(hsp_mbox->db_base[HSP_DB_CCPLEX], HSP_DB_REG_ENABLE, val);
+ spin_unlock_irqrestore(&hsp_mbox->lock, flag);
+}
+
+static bool hsp_db_last_tx_done(struct mbox_chan *chan)
+{
+ return true;
+}
+
+static const struct mbox_chan_ops tegra_hsp_db_ops = {
+ .send_data = hsp_db_send_data,
+ .startup = hsp_db_startup,
+ .shutdown = hsp_db_shutdown,
+ .last_tx_done = hsp_db_last_tx_done,
+};
+
+static int tegra_hsp_db_init(struct platform_device *pdev,
+ struct tegra_hsp_mbox *hsp_mbox)
+{
+ int i, irq, ret;
+
+ if (hsp_mbox->db_mbox == NULL) {
+ hsp_mbox->db_mbox = devm_kzalloc(&pdev->dev,
+ sizeof(*hsp_mbox->db_mbox),
+ GFP_KERNEL);
+ if (!hsp_mbox->db_mbox)
+ return -ENOMEM;
+ }
+
+ irq = platform_get_irq_byname(pdev, "doorbell");
+ ret = devm_request_irq(&pdev->dev, irq, hsp_db_irq,
+ IRQF_NO_SUSPEND, dev_name(&pdev->dev), hsp_mbox);
+ if (ret)
+ return ret;
+
+ hsp_mbox->db_mbox->chans =
+ devm_kcalloc(&pdev->dev, MAX_NUM_HSP_CHAN,
+ sizeof(*hsp_mbox->db_mbox->chans), GFP_KERNEL);
+ if (!hsp_mbox->db_mbox->chans)
+ return -ENOMEM;
+
+ for (i = 0; i < MAX_NUM_HSP_CHAN; i++) {
+ struct tegra_hsp_db_chan *db_chan;
+
+ db_chan = devm_kzalloc(&pdev->dev,
+ sizeof(*db_chan), GFP_KERNEL);
+ if (!db_chan)
+ return -ENOMEM;
+
+ db_chan->master_id = i;
+ switch (i) {
+ case HSP_DB_MASTER_BPMP:
+ db_chan->db_id = HSP_DB_BPMP;
+ break;
+ default:
+ db_chan->db_id = MAX_NUM_HSP_DB;
+ break;
+ }
+
+ hsp_mbox->db_mbox->chans[i].con_priv = db_chan;
+ }
+
+ hsp_mbox->db_mbox->num_chans = MAX_NUM_HSP_CHAN;
+ hsp_mbox->db_mbox->dev = &pdev->dev;
+ hsp_mbox->db_mbox->txdone_irq = false;
+ hsp_mbox->db_mbox->txdone_poll = false;
+ hsp_mbox->db_mbox->ops = &tegra_hsp_db_ops;
+ platform_set_drvdata(pdev, hsp_mbox);
+
+ for (i = 0; i < MAX_NUM_HSP_DB; i++)
+ hsp_mbox->db_base[i] = hsp_db_offset(i, hsp_mbox);
+
+ ret = mbox_controller_register(hsp_mbox->db_mbox);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct of_device_id tegra_hsp_match[] = {
+ { .compatible = "nvidia,tegra186-hsp", },
+ { }
+};
+
+static int tegra_hsp_probe(struct platform_device *pdev)
+{
+ struct tegra_hsp_mbox *hsp_mbox;
+ struct device_node *np;
+ struct resource *res;
+ int hsp_func_id;
+ int ret = 0;
+ u32 reg;
+
+ hsp_mbox = devm_kzalloc(&pdev->dev, sizeof(*hsp_mbox), GFP_KERNEL);
+ if (!hsp_mbox)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ hsp_mbox->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(hsp_mbox->base))
+ return PTR_ERR(hsp_mbox->base);
+
+ reg = hsp_readl(hsp_mbox->base, HSP_INT_DIMENSIONING);
+ hsp_mbox->nr_sm = (reg >> HSP_nSM_OFFSET) & HSP_nINT_MASK;
+ hsp_mbox->nr_ss = (reg >> HSP_nSS_OFFSET) & HSP_nINT_MASK;
+ hsp_mbox->nr_as = (reg >> HSP_nAS_OFFSET) & HSP_nINT_MASK;
+ hsp_mbox->nr_db = (reg >> HSP_nDB_OFFSET) & HSP_nINT_MASK;
+ hsp_mbox->nr_si = (reg >> HSP_nSI_OFFSET) & HSP_nINT_MASK;
+
+ np = pdev->dev.of_node;
+ ret = of_property_read_u32(np, "nvidia,hsp-function", &hsp_func_id);
+ if (ret) {
+ pr_err("tegra-hsp mbox: fail to parse DT configuration.\n");
+ return -EINVAL;
+ }
+
+ switch (hsp_func_id) {
+ case HSP_DOORBELL:
+ ret = tegra_hsp_db_init(pdev, hsp_mbox);
+ break;
+ default:
+ break;
+ }
+
+ if (ret) {
+ pr_err("tegra-hsp mbox: fail to register mailbox %d.\n", ret);
+ return ret;
+ }
+
+ spin_lock_init(&hsp_mbox->lock);
+
+ return 0;
+}
+
+static int tegra_hsp_remove(struct platform_device *pdev)
+{
+ struct tegra_hsp_mbox *hsp_mbox = platform_get_drvdata(pdev);
+
+ if (hsp_mbox->db_mbox)
+ mbox_controller_unregister(hsp_mbox->db_mbox);
+
+ return 0;
+}
+
+static struct platform_driver tegra_hsp_driver = {
+ .driver = {
+ .name = "tegra-hsp",
+ .of_match_table = tegra_hsp_match,
+ },
+ .probe = tegra_hsp_probe,
+ .remove = tegra_hsp_remove,
+};
+
+static int __init tegra_hsp_init(void)
+{
+ return platform_driver_register(&tegra_hsp_driver);
+}
+core_initcall(tegra_hsp_init);
--
2.9.0
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH 03/10] Documentation: dt-bindings: firmware: tegra: add bindings of the BPMP
2016-06-27 9:02 [PATCH 00/10] arm64: tegra: add BPMP support Joseph Lo
2016-06-27 9:02 ` [PATCH 01/10] Documentation: dt-bindings: mailbox: tegra: Add binding for HSP mailbox Joseph Lo
2016-06-27 9:02 ` [PATCH 02/10] mailbox: tegra-hsp: Add HSP(Hardware Synchronization Primitives) driver Joseph Lo
@ 2016-06-27 9:02 ` Joseph Lo
[not found] ` <20160627090248.23621-4-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-06-27 9:02 ` [PATCH 04/10] firmware: tegra: add IVC library Joseph Lo
` (4 subsequent siblings)
7 siblings, 1 reply; 21+ messages in thread
From: Joseph Lo @ 2016-06-27 9:02 UTC (permalink / raw)
To: Stephen Warren, Thierry Reding, Alexandre Courbot
Cc: linux-tegra, linux-arm-kernel, Rob Herring, Mark Rutland,
Peter De Schrijver, Matthew Longnecker, devicetree, Jassi Brar,
linux-kernel, Catalin Marinas, Will Deacon, Joseph Lo
The BPMP is a specific processor in Tegra chip, which is designed for
booting process handling and offloading the power management tasks
from the CPU. The binding document defines the resources that would be
used by the BPMP firmware driver, which can create the interprocessor
communication (IPC) between the CPU and BPMP.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
---
.../bindings/firmware/nvidia,tegra186-bpmp.txt | 61 ++++++++++++++++++++++
1 file changed, 61 insertions(+)
create mode 100644 Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
new file mode 100644
index 000000000000..34a252d87e17
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
@@ -0,0 +1,61 @@
+NVIDIA Tegra Boot and Power Management Processor (BPMP)
+
+The BPMP is a specific processor in Tegra chip, which is designed for
+booting process handling and offloading the power management tasks from
+the CPU. The binding document defines the resources that would be used by
+the BPMP firmware driver, which can create the interprocessor
+communication (IPC) between the CPU and BPMP.
+
+Required properties:
+- name : Should be bpmp
+- compatible : Should be "nvidia,tegra<chip>-bpmp"
+- mboxes : The phandle of mailbox controller and the channel ID
+ See "Documentation/devicetree/bindings/mailbox/
+ nvidia,tegra186-hsp.txt" and "Documentation/devicetree/
+ bindings/mailbox/mailbox.txt" for more details about the generic
+ mailbox controller and mailbox client driver bindings.
+- shmem : List of the phandle of the TX and RX shared memory area that
+ the IPC between CPU and BPMP is based on.
+- #clock-cells : Should be 1.
+- #reset-cells : Should be 1.
+
+The shared memory bindings for BPMP
+-----------------------------------
+
+The shared memory area for the IPC TX and RX between CPU and BPMP are
+predefined and work on top of sysram, which is a sram inside the chip.
+
+See "Documentation/devicetree/bindings/sram/sram.txt" for the bindings.
+
+Example:
+
+hsp_top: hsp@03c00000 {
+ ...
+ #mbox-cells = <1>;
+};
+
+bpmp@d0000000 {
+ compatible = "nvidia,tegra186-bpmp";
+ mboxes = <&hsp_mbox HSP_DB_MASTER_BPMP>;
+ shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
+
+sysram@30000000 {
+ compatible = "nvidia,tegra186-sysram", "mmio-ram";
+ reg = <0x0 0x30000000 0x0 0x50000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
+
+ cpu_bpmp_tx: bpmp_shmem@4e000 {
+ compatible = "nvidia,tegra186-bpmp-shmem";
+ reg = <0x0 0x4e000 0x0 0x1000>;
+ };
+
+ cpu_bpmp_rx: bpmp_shmem@4f000 {
+ compatible = "nvidia,tegra186-bpmp-shmem";
+ reg = <0x0 0x4f000 0x0 0x1000>;
+ };
+};
--
2.9.0
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH 04/10] firmware: tegra: add IVC library
2016-06-27 9:02 [PATCH 00/10] arm64: tegra: add BPMP support Joseph Lo
` (2 preceding siblings ...)
2016-06-27 9:02 ` [PATCH 03/10] Documentation: dt-bindings: firmware: tegra: add bindings of the BPMP Joseph Lo
@ 2016-06-27 9:02 ` Joseph Lo
2016-06-27 9:02 ` [PATCH 05/10] firmware: tegra: add BPMP support Joseph Lo
` (3 subsequent siblings)
7 siblings, 0 replies; 21+ messages in thread
From: Joseph Lo @ 2016-06-27 9:02 UTC (permalink / raw)
To: Stephen Warren, Thierry Reding, Alexandre Courbot
Cc: linux-tegra, linux-arm-kernel, Rob Herring, Mark Rutland,
Peter De Schrijver, Matthew Longnecker, devicetree, Jassi Brar,
linux-kernel, Catalin Marinas, Will Deacon, Joseph Lo
The Inter-VM communication (IVC) is a communication protocol, which is
designed for interprocessor communication (IPC) or the communication
between the hypervisor and the virtual machine with a guest OS on it. So
it can be translated as inter-virtual memory or inter-virtual machine
communication. The message channels are maintained on the DRAM or SRAM
and the data coherency should be considered. Or the data could be
corrupted or out of date when the remote client checking it.
Inside the IVC, it maintains memory-based descriptors for the TX/RX
channels and the coherency issue of the counter and payloads. So the
clients can use it to send/receive messages to/from remote ones.
We introduce it as a library for the firmware drivers, which can use it
for IPC.
Based-on-the-work-by:
Peter Newman <pnewman@nvidia.com>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
---
drivers/firmware/Kconfig | 1 +
drivers/firmware/Makefile | 1 +
drivers/firmware/tegra/Kconfig | 13 +
drivers/firmware/tegra/Makefile | 1 +
drivers/firmware/tegra/ivc.c | 659 ++++++++++++++++++++++++++++++++++++++++
include/soc/tegra/ivc.h | 102 +++++++
6 files changed, 777 insertions(+)
create mode 100644 drivers/firmware/tegra/Kconfig
create mode 100644 drivers/firmware/tegra/Makefile
create mode 100644 drivers/firmware/tegra/ivc.c
create mode 100644 include/soc/tegra/ivc.h
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 6664f1108c7c..8602d81a6072 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -199,5 +199,6 @@ config HAVE_ARM_SMCCC
source "drivers/firmware/broadcom/Kconfig"
source "drivers/firmware/google/Kconfig"
source "drivers/firmware/efi/Kconfig"
+source "drivers/firmware/tegra/Kconfig"
endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 474bada56fcd..9a4df8171cc4 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -24,3 +24,4 @@ obj-y += broadcom/
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
obj-$(CONFIG_EFI) += efi/
obj-$(CONFIG_UEFI_CPER) += efi/
+obj-y += tegra/
diff --git a/drivers/firmware/tegra/Kconfig b/drivers/firmware/tegra/Kconfig
new file mode 100644
index 000000000000..1fa3e4e136a5
--- /dev/null
+++ b/drivers/firmware/tegra/Kconfig
@@ -0,0 +1,13 @@
+menu "Tegra firmware driver"
+
+config TEGRA_IVC
+ bool "Tegra IVC protocol"
+ depends on ARCH_TEGRA
+ help
+ IVC (Inter-VM Communication) protocol is part of the IPC
+ (Inter Processor Communication) framework on Tegra. It maintains the
+ data and the different commuication channels in SysRAM or RAM and
+ keeps the content is synchronization between host CPU and remote
+ processors.
+
+endmenu
diff --git a/drivers/firmware/tegra/Makefile b/drivers/firmware/tegra/Makefile
new file mode 100644
index 000000000000..92e2153e8173
--- /dev/null
+++ b/drivers/firmware/tegra/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_TEGRA_IVC) += ivc.o
diff --git a/drivers/firmware/tegra/ivc.c b/drivers/firmware/tegra/ivc.c
new file mode 100644
index 000000000000..3e736bb9915a
--- /dev/null
+++ b/drivers/firmware/tegra/ivc.c
@@ -0,0 +1,659 @@
+/*
+ * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+
+#include <soc/tegra/ivc.h>
+
+#define IVC_ALIGN 64
+
+#ifdef CONFIG_SMP
+
+static inline void ivc_rmb(void)
+{
+ smp_rmb();
+}
+
+static inline void ivc_wmb(void)
+{
+ smp_wmb();
+}
+
+static inline void ivc_mb(void)
+{
+ smp_mb();
+}
+
+#else
+
+static inline void ivc_rmb(void)
+{
+ rmb();
+}
+
+static inline void ivc_wmb(void)
+{
+ wmb();
+}
+
+static inline void ivc_mb(void)
+{
+ mb();
+}
+
+#endif
+
+/*
+ * IVC channel reset protocol.
+ *
+ * Each end uses its tx_channel.state to indicate its synchronization state.
+ */
+enum ivc_state {
+ /*
+ * This value is zero for backwards compatibility with services that
+ * assume channels to be initially zeroed. Such channels are in an
+ * initially valid state, but cannot be asynchronously reset, and must
+ * maintain a valid state at all times.
+ *
+ * The transmitting end can enter the established state from the sync or
+ * ack state when it observes the receiving endpoint in the ack or
+ * established state, indicating that has cleared the counters in our
+ * rx_channel.
+ */
+ ivc_state_established = 0,
+
+ /*
+ * If an endpoint is observed in the sync state, the remote endpoint is
+ * allowed to clear the counters it owns asynchronously with respect to
+ * the current endpoint. Therefore, the current endpoint is no longer
+ * allowed to communicate.
+ */
+ ivc_state_sync,
+
+ /*
+ * When the transmitting end observes the receiving end in the sync
+ * state, it can clear the w_count and r_count and transition to the ack
+ * state. If the remote endpoint observes us in the ack state, it can
+ * return to the established state once it has cleared its counters.
+ */
+ ivc_state_ack
+};
+
+/*
+ * This structure is divided into two-cache aligned parts, the first is only
+ * written through the tx_channel pointer, while the second is only written
+ * through the rx_channel pointer. This delineates ownership of the cache lines,
+ * which is critical to performance and necessary in non-cache coherent
+ * implementations.
+ */
+struct ivc_channel_header {
+ union {
+ struct {
+ /* fields owned by the transmitting end */
+ uint32_t w_count;
+ uint32_t state;
+ };
+ uint8_t w_align[IVC_ALIGN];
+ };
+ union {
+ /* fields owned by the receiving end */
+ uint32_t r_count;
+ uint8_t r_align[IVC_ALIGN];
+ };
+};
+
+static inline void ivc_invalidate_counter(struct ivc *ivc,
+ dma_addr_t handle)
+{
+ if (!ivc->peer_device)
+ return;
+ dma_sync_single_for_cpu(ivc->peer_device, handle, IVC_ALIGN,
+ DMA_FROM_DEVICE);
+}
+
+static inline void ivc_flush_counter(struct ivc *ivc, dma_addr_t handle)
+{
+ if (!ivc->peer_device)
+ return;
+ dma_sync_single_for_device(ivc->peer_device, handle, IVC_ALIGN,
+ DMA_TO_DEVICE);
+}
+
+static inline int ivc_channel_empty(struct ivc *ivc,
+ struct ivc_channel_header *ch)
+{
+ /*
+ * This function performs multiple checks on the same values with
+ * security implications, so create snapshots with ACCESS_ONCE() to
+ * ensure that these checks use the same values.
+ */
+ uint32_t w_count = ACCESS_ONCE(ch->w_count);
+ uint32_t r_count = ACCESS_ONCE(ch->r_count);
+
+ /*
+ * Perform an over-full check to prevent denial of service attacks where
+ * a server could be easily fooled into believing that there's an
+ * extremely large number of frames ready, since receivers are not
+ * expected to check for full or over-full conditions.
+ *
+ * Although the channel isn't empty, this is an invalid case caused by
+ * a potentially malicious peer, so returning empty is safer, because it
+ * gives the impression that the channel has gone silent.
+ */
+ if (w_count - r_count > ivc->nframes)
+ return 1;
+
+ return w_count == r_count;
+}
+
+static inline int ivc_channel_full(struct ivc *ivc,
+ struct ivc_channel_header *ch)
+{
+ /*
+ * Invalid cases where the counters indicate that the queue is over
+ * capacity also appear full.
+ */
+ return ACCESS_ONCE(ch->w_count) - ACCESS_ONCE(ch->r_count)
+ >= ivc->nframes;
+}
+
+static inline uint32_t ivc_channel_avail_count(struct ivc *ivc,
+ struct ivc_channel_header *ch)
+{
+ /*
+ * This function isn't expected to be used in scenarios where an
+ * over-full situation can lead to denial of service attacks. See the
+ * comment in ivc_channel_empty() for an explanation about special
+ * over-full considerations.
+ */
+ return ACCESS_ONCE(ch->w_count) - ACCESS_ONCE(ch->r_count);
+}
+
+static inline void ivc_advance_tx(struct ivc *ivc)
+{
+ ACCESS_ONCE(ivc->tx_channel->w_count) =
+ ACCESS_ONCE(ivc->tx_channel->w_count) + 1;
+
+ if (ivc->w_pos == ivc->nframes - 1)
+ ivc->w_pos = 0;
+ else
+ ivc->w_pos++;
+}
+
+static inline void ivc_advance_rx(struct ivc *ivc)
+{
+ ACCESS_ONCE(ivc->rx_channel->r_count) =
+ ACCESS_ONCE(ivc->rx_channel->r_count) + 1;
+
+ if (ivc->r_pos == ivc->nframes - 1)
+ ivc->r_pos = 0;
+ else
+ ivc->r_pos++;
+}
+
+static inline int ivc_check_read(struct ivc *ivc)
+{
+ /*
+ * tx_channel->state is set locally, so it is not synchronized with
+ * state from the remote peer. The remote peer cannot reset its
+ * transmit counters until we've acknowledged its synchronization
+ * request, so no additional synchronization is required because an
+ * asynchronous transition of rx_channel->state to ivc_state_ack is not
+ * allowed.
+ */
+ if (ivc->tx_channel->state != ivc_state_established)
+ return -ECONNRESET;
+
+ /*
+ * Avoid unnecessary invalidations when performing repeated accesses to
+ * an IVC channel by checking the old queue pointers first.
+ * Synchronization is only necessary when these pointers indicate empty
+ * or full.
+ */
+ if (!ivc_channel_empty(ivc, ivc->rx_channel))
+ return 0;
+
+ ivc_invalidate_counter(ivc, ivc->rx_handle +
+ offsetof(struct ivc_channel_header, w_count));
+ return ivc_channel_empty(ivc, ivc->rx_channel) ? -ENOMEM : 0;
+}
+
+static inline int ivc_check_write(struct ivc *ivc)
+{
+ if (ivc->tx_channel->state != ivc_state_established)
+ return -ECONNRESET;
+
+ if (!ivc_channel_full(ivc, ivc->tx_channel))
+ return 0;
+
+ ivc_invalidate_counter(ivc, ivc->tx_handle +
+ offsetof(struct ivc_channel_header, r_count));
+ return ivc_channel_full(ivc, ivc->tx_channel) ? -ENOMEM : 0;
+}
+
+static void *ivc_frame_pointer(struct ivc *ivc, struct ivc_channel_header *ch,
+ uint32_t frame)
+{
+ BUG_ON(frame >= ivc->nframes);
+ return (void *)((uintptr_t)(ch + 1) + ivc->frame_size * frame);
+}
+
+static inline dma_addr_t ivc_frame_handle(struct ivc *ivc,
+ dma_addr_t channel_handle, uint32_t frame)
+{
+ BUG_ON(!ivc->peer_device);
+ BUG_ON(frame >= ivc->nframes);
+ return channel_handle + sizeof(struct ivc_channel_header) +
+ ivc->frame_size * frame;
+}
+
+static inline void ivc_invalidate_frame(struct ivc *ivc,
+ dma_addr_t channel_handle, unsigned frame, int offset, int len)
+{
+ if (!ivc->peer_device)
+ return;
+ dma_sync_single_for_cpu(ivc->peer_device,
+ ivc_frame_handle(ivc, channel_handle, frame) + offset,
+ len, DMA_FROM_DEVICE);
+}
+
+static inline void ivc_flush_frame(struct ivc *ivc, dma_addr_t channel_handle,
+ unsigned frame, int offset, int len)
+{
+ if (!ivc->peer_device)
+ return;
+ dma_sync_single_for_device(ivc->peer_device,
+ ivc_frame_handle(ivc, channel_handle, frame) + offset,
+ len, DMA_TO_DEVICE);
+}
+
+/* directly peek at the next frame rx'ed */
+void *tegra_ivc_read_get_next_frame(struct ivc *ivc)
+{
+ int result = ivc_check_read(ivc);
+ if (result)
+ return ERR_PTR(result);
+
+ /*
+ * Order observation of w_pos potentially indicating new data before
+ * data read.
+ */
+ ivc_rmb();
+
+ ivc_invalidate_frame(ivc, ivc->rx_handle, ivc->r_pos, 0,
+ ivc->frame_size);
+ return ivc_frame_pointer(ivc, ivc->rx_channel, ivc->r_pos);
+}
+EXPORT_SYMBOL(tegra_ivc_read_get_next_frame);
+
+int tegra_ivc_read_advance(struct ivc *ivc)
+{
+ /*
+ * No read barriers or synchronization here: the caller is expected to
+ * have already observed the channel non-empty. This check is just to
+ * catch programming errors.
+ */
+ int result = ivc_check_read(ivc);
+ if (result)
+ return result;
+
+ ivc_advance_rx(ivc);
+ ivc_flush_counter(ivc, ivc->rx_handle +
+ offsetof(struct ivc_channel_header, r_count));
+
+ /*
+ * Ensure our write to r_pos occurs before our read from w_pos.
+ */
+ ivc_mb();
+
+ /*
+ * Notify only upon transition from full to non-full.
+ * The available count can only asynchronously increase, so the
+ * worst possible side-effect will be a spurious notification.
+ */
+ ivc_invalidate_counter(ivc, ivc->rx_handle +
+ offsetof(struct ivc_channel_header, w_count));
+
+ if (ivc_channel_avail_count(ivc, ivc->rx_channel) == ivc->nframes - 1)
+ ivc->notify(ivc);
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra_ivc_read_advance);
+
+/* directly poke at the next frame to be tx'ed */
+void *tegra_ivc_write_get_next_frame(struct ivc *ivc)
+{
+ int result = ivc_check_write(ivc);
+ if (result)
+ return ERR_PTR(result);
+
+ return ivc_frame_pointer(ivc, ivc->tx_channel, ivc->w_pos);
+}
+EXPORT_SYMBOL(tegra_ivc_write_get_next_frame);
+
+/* advance the tx buffer */
+int tegra_ivc_write_advance(struct ivc *ivc)
+{
+ int result = ivc_check_write(ivc);
+ if (result)
+ return result;
+
+ ivc_flush_frame(ivc, ivc->tx_handle, ivc->w_pos, 0, ivc->frame_size);
+
+ /*
+ * Order any possible stores to the frame before update of w_pos.
+ */
+ ivc_wmb();
+
+ ivc_advance_tx(ivc);
+ ivc_flush_counter(ivc, ivc->tx_handle +
+ offsetof(struct ivc_channel_header, w_count));
+
+ /*
+ * Ensure our write to w_pos occurs before our read from r_pos.
+ */
+ ivc_mb();
+
+ /*
+ * Notify only upon transition from empty to non-empty.
+ * The available count can only asynchronously decrease, so the
+ * worst possible side-effect will be a spurious notification.
+ */
+ ivc_invalidate_counter(ivc, ivc->tx_handle +
+ offsetof(struct ivc_channel_header, r_count));
+
+ if (ivc_channel_avail_count(ivc, ivc->tx_channel) == 1)
+ ivc->notify(ivc);
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra_ivc_write_advance);
+
+void tegra_ivc_channel_reset(struct ivc *ivc)
+{
+ ivc->tx_channel->state = ivc_state_sync;
+ ivc_flush_counter(ivc, ivc->tx_handle +
+ offsetof(struct ivc_channel_header, w_count));
+ ivc->notify(ivc);
+}
+EXPORT_SYMBOL(tegra_ivc_channel_reset);
+
+/*
+ * ===============================================================
+ * IVC State Transition Table - see tegra_ivc_channel_notified()
+ * ===============================================================
+ *
+ * local remote action
+ * ----- ------ -----------------------------------
+ * SYNC EST <none>
+ * SYNC ACK reset counters; move to EST; notify
+ * SYNC SYNC reset counters; move to ACK; notify
+ * ACK EST move to EST; notify
+ * ACK ACK move to EST; notify
+ * ACK SYNC reset counters; move to ACK; notify
+ * EST EST <none>
+ * EST ACK <none>
+ * EST SYNC reset counters; move to ACK; notify
+ *
+ * ===============================================================
+ */
+
+int tegra_ivc_channel_notified(struct ivc *ivc)
+{
+ enum ivc_state peer_state;
+
+ /* Copy the receiver's state out of shared memory. */
+ ivc_invalidate_counter(ivc, ivc->rx_handle +
+ offsetof(struct ivc_channel_header, w_count));
+ peer_state = ACCESS_ONCE(ivc->rx_channel->state);
+
+ if (peer_state == ivc_state_sync) {
+ /*
+ * Order observation of ivc_state_sync before stores clearing
+ * tx_channel.
+ */
+ ivc_rmb();
+
+ /*
+ * Reset tx_channel counters. The remote end is in the SYNC
+ * state and won't make progress until we change our state,
+ * so the counters are not in use at this time.
+ */
+ ivc->tx_channel->w_count = 0;
+ ivc->rx_channel->r_count = 0;
+
+ ivc->w_pos = 0;
+ ivc->r_pos = 0;
+
+ /*
+ * Ensure that counters appear cleared before new state can be
+ * observed.
+ */
+ ivc_wmb();
+
+ /*
+ * Move to ACK state. We have just cleared our counters, so it
+ * is now safe for the remote end to start using these values.
+ */
+ ivc->tx_channel->state = ivc_state_ack;
+ ivc_flush_counter(ivc, ivc->tx_handle +
+ offsetof(struct ivc_channel_header, w_count));
+
+ /*
+ * Notify remote end to observe state transition.
+ */
+ ivc->notify(ivc);
+
+ } else if (ivc->tx_channel->state == ivc_state_sync &&
+ peer_state == ivc_state_ack) {
+ /*
+ * Order observation of ivc_state_sync before stores clearing
+ * tx_channel.
+ */
+ ivc_rmb();
+
+ /*
+ * Reset tx_channel counters. The remote end is in the ACK
+ * state and won't make progress until we change our state,
+ * so the counters are not in use at this time.
+ */
+ ivc->tx_channel->w_count = 0;
+ ivc->rx_channel->r_count = 0;
+
+ ivc->w_pos = 0;
+ ivc->r_pos = 0;
+
+ /*
+ * Ensure that counters appear cleared before new state can be
+ * observed.
+ */
+ ivc_wmb();
+
+ /*
+ * Move to ESTABLISHED state. We know that the remote end has
+ * already cleared its counters, so it is safe to start
+ * writing/reading on this channel.
+ */
+ ivc->tx_channel->state = ivc_state_established;
+ ivc_flush_counter(ivc, ivc->tx_handle +
+ offsetof(struct ivc_channel_header, w_count));
+
+ /*
+ * Notify remote end to observe state transition.
+ */
+ ivc->notify(ivc);
+
+ } else if (ivc->tx_channel->state == ivc_state_ack) {
+ /*
+ * At this point, we have observed the peer to be in either
+ * the ACK or ESTABLISHED state. Next, order observation of
+ * peer state before storing to tx_channel.
+ */
+ ivc_rmb();
+
+ /*
+ * Move to ESTABLISHED state. We know that we have previously
+ * cleared our counters, and we know that the remote end has
+ * cleared its counters, so it is safe to start writing/reading
+ * on this channel.
+ */
+ ivc->tx_channel->state = ivc_state_established;
+ ivc_flush_counter(ivc, ivc->tx_handle +
+ offsetof(struct ivc_channel_header, w_count));
+
+ /*
+ * Notify remote end to observe state transition.
+ */
+ ivc->notify(ivc);
+
+ } else {
+ /*
+ * There is no need to handle any further action. Either the
+ * channel is already fully established, or we are waiting for
+ * the remote end to catch up with our current state. Refer
+ * to the diagram in "IVC State Transition Table" above.
+ */
+ }
+
+ return ivc->tx_channel->state == ivc_state_established ? 0 : -EAGAIN;
+}
+EXPORT_SYMBOL(tegra_ivc_channel_notified);
+
+size_t tegra_ivc_align(size_t size)
+{
+ return (size + (IVC_ALIGN - 1)) & ~(IVC_ALIGN - 1);
+}
+EXPORT_SYMBOL(tegra_ivc_align);
+
+unsigned tegra_ivc_total_queue_size(unsigned queue_size)
+{
+ if (queue_size & (IVC_ALIGN - 1)) {
+ pr_err("%s: queue_size (%u) must be %u-byte aligned\n",
+ __func__, queue_size, IVC_ALIGN);
+ return 0;
+ }
+ return queue_size + sizeof(struct ivc_channel_header);
+}
+EXPORT_SYMBOL(tegra_ivc_total_queue_size);
+
+static int check_ivc_params(uintptr_t queue_base1, uintptr_t queue_base2,
+ unsigned nframes, unsigned frame_size)
+{
+ BUG_ON(offsetof(struct ivc_channel_header, w_count) & (IVC_ALIGN - 1));
+ BUG_ON(offsetof(struct ivc_channel_header, r_count) & (IVC_ALIGN - 1));
+ BUG_ON(sizeof(struct ivc_channel_header) & (IVC_ALIGN - 1));
+
+ if ((uint64_t)nframes * (uint64_t)frame_size >= 0x100000000) {
+ pr_err("nframes * frame_size overflows\n");
+ return -EINVAL;
+ }
+
+ /*
+ * The headers must at least be aligned enough for counters
+ * to be accessed atomically.
+ */
+ if (queue_base1 & (IVC_ALIGN - 1)) {
+ pr_err("ivc channel start not aligned: %lx\n", queue_base1);
+ return -EINVAL;
+ }
+ if (queue_base2 & (IVC_ALIGN - 1)) {
+ pr_err("ivc channel start not aligned: %lx\n", queue_base2);
+ return -EINVAL;
+ }
+
+ if (frame_size & (IVC_ALIGN - 1)) {
+ pr_err("frame size not adequately aligned: %u\n", frame_size);
+ return -EINVAL;
+ }
+
+ if (queue_base1 < queue_base2) {
+ if (queue_base1 + frame_size * nframes > queue_base2) {
+ pr_err("queue regions overlap: %lx + %x, %x\n",
+ queue_base1, frame_size,
+ frame_size * nframes);
+ return -EINVAL;
+ }
+ } else {
+ if (queue_base2 + frame_size * nframes > queue_base1) {
+ pr_err("queue regions overlap: %lx + %x, %x\n",
+ queue_base2, frame_size,
+ frame_size * nframes);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+int tegra_ivc_init(struct ivc *ivc, uintptr_t rx_base, dma_addr_t rx_handle,
+ uintptr_t tx_base, dma_addr_t tx_handle, unsigned nframes,
+ unsigned frame_size, struct device *peer_device,
+ void (*notify)(struct ivc *))
+{
+ size_t queue_size;
+
+ int result = check_ivc_params(rx_base, tx_base, nframes, frame_size);
+ if (result)
+ return result;
+
+ BUG_ON(!ivc);
+ BUG_ON(!notify);
+
+ queue_size = tegra_ivc_total_queue_size(nframes * frame_size);
+
+ /*
+ * All sizes that can be returned by communication functions should
+ * fit in an int.
+ */
+ if (frame_size > INT_MAX)
+ return -E2BIG;
+
+ ivc->rx_channel = (struct ivc_channel_header *)rx_base;
+ ivc->tx_channel = (struct ivc_channel_header *)tx_base;
+
+ if (peer_device) {
+ if (rx_handle != DMA_ERROR_CODE) {
+ ivc->rx_handle = rx_handle;
+ ivc->tx_handle = tx_handle;
+ } else {
+ ivc->rx_handle = dma_map_single(peer_device,
+ ivc->rx_channel, queue_size, DMA_BIDIRECTIONAL);
+ if (ivc->rx_handle == DMA_ERROR_CODE)
+ return -ENOMEM;
+
+ ivc->tx_handle = dma_map_single(peer_device,
+ ivc->tx_channel, queue_size, DMA_BIDIRECTIONAL);
+ if (ivc->tx_handle == DMA_ERROR_CODE) {
+ dma_unmap_single(peer_device, ivc->rx_handle,
+ queue_size, DMA_BIDIRECTIONAL);
+ return -ENOMEM;
+ }
+ }
+ }
+
+ ivc->notify = notify;
+ ivc->frame_size = frame_size;
+ ivc->nframes = nframes;
+ ivc->peer_device = peer_device;
+
+ /*
+ * These values aren't necessarily correct until the channel has been
+ * reset.
+ */
+ ivc->w_pos = 0;
+ ivc->r_pos = 0;
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra_ivc_init);
diff --git a/include/soc/tegra/ivc.h b/include/soc/tegra/ivc.h
new file mode 100644
index 000000000000..1762fbee3fa2
--- /dev/null
+++ b/include/soc/tegra/ivc.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __TEGRA_IVC_H
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/types.h>
+
+struct ivc_channel_header;
+
+struct ivc {
+ struct ivc_channel_header *rx_channel, *tx_channel;
+ uint32_t w_pos, r_pos;
+
+ void (*notify)(struct ivc *);
+ uint32_t nframes, frame_size;
+
+ struct device *peer_device;
+ dma_addr_t rx_handle, tx_handle;
+};
+
+/**
+ * tegra_ivc_read_get_next_frame - Peek at the next frame to receive
+ * @ivc pointer of the IVC channel
+ *
+ * Peek at the next frame to be received, without removing it from
+ * the queue.
+ *
+ * Returns a pointer to the frame, or an error encoded pointer.
+ */
+void *tegra_ivc_read_get_next_frame(struct ivc *ivc);
+
+/**
+ * tegra_ivc_read_advance - Advance the read queue
+ * @ivc pointer of the IVC channel
+ *
+ * Advance the read queue
+ *
+ * Returns 0, or a negative error value if failed.
+ */
+int tegra_ivc_read_advance(struct ivc *ivc);
+
+/**
+ * tegra_ivc_write_get_next_frame - Poke at the next frame to transmit
+ * @ivc pointer of the IVC channel
+ *
+ * Get access to the next frame.
+ *
+ * Returns a pointer to the frame, or an error encoded pointer.
+ */
+void *tegra_ivc_write_get_next_frame(struct ivc *ivc);
+
+/**
+ * tegra_ivc_write_advance - Advance the write queue
+ * @ivc pointer of the IVC channel
+ *
+ * Advance the write queue
+ *
+ * Returns 0, or a negative error value if failed.
+ */
+int tegra_ivc_write_advance(struct ivc *ivc);
+
+/**
+ * tegra_ivc_channel_notified - handle internal messages
+ * @ivc pointer of the IVC channel
+ *
+ * This function must be called following every notification.
+ *
+ * Returns 0 if the channel is ready for communication, or -EAGAIN if a channel
+ * reset is in progress.
+ */
+int tegra_ivc_channel_notified(struct ivc *ivc);
+
+/**
+ * tegra_ivc_channel_reset - initiates a reset of the shared memory state
+ * @ivc pointer of the IVC channel
+ *
+ * This function must be called after a channel is reserved before it is used
+ * for communication. The channel will be ready for use when a subsequent call
+ * to notify the remote of the channel reset.
+ */
+void tegra_ivc_channel_reset(struct ivc *ivc);
+
+size_t tegra_ivc_align(size_t size);
+unsigned tegra_ivc_total_queue_size(unsigned queue_size);
+int tegra_ivc_init(struct ivc *ivc, uintptr_t rx_base, dma_addr_t rx_handle,
+ uintptr_t tx_base, dma_addr_t tx_handle, unsigned nframes,
+ unsigned frame_size, struct device *peer_device,
+ void (*notify)(struct ivc *));
+
+#endif /* __TEGRA_IVC_H */
--
2.9.0
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH 05/10] firmware: tegra: add BPMP support
2016-06-27 9:02 [PATCH 00/10] arm64: tegra: add BPMP support Joseph Lo
` (3 preceding siblings ...)
2016-06-27 9:02 ` [PATCH 04/10] firmware: tegra: add IVC library Joseph Lo
@ 2016-06-27 9:02 ` Joseph Lo
2016-06-27 9:02 ` [PATCH 06/10] soc/tegra: Add Tegra186 support Joseph Lo
` (2 subsequent siblings)
7 siblings, 0 replies; 21+ messages in thread
From: Joseph Lo @ 2016-06-27 9:02 UTC (permalink / raw)
To: Stephen Warren, Thierry Reding, Alexandre Courbot
Cc: linux-tegra, linux-arm-kernel, Rob Herring, Mark Rutland,
Peter De Schrijver, Matthew Longnecker, devicetree, Jassi Brar,
linux-kernel, Catalin Marinas, Will Deacon, Joseph Lo
The Tegra BPMP (Boot and Power Management Processor) is designed for the
booting process handling, offloading the power management tasks and
some system control services from the CPU. It can be clock, DVFS,
thermal/EDP, power gating operation and system suspend/resume handling.
So the CPU and the drivers of these modules can base on the service that
the BPMP firmware driver provided to signal the event for the specific PM
action to BPMP and receive the status update from BPMP.
Comparing to the ARM SCPI, the service provided by BPMP is message-based
communication but not method-based. The BPMP firmware driver provides the
send/receive service for the users, when the user concerns the response
time. If the user needs to get the event or update from the firmware, it
can request the MRQ service as well. The user needs to take care of the
message format, which we call BPMP ABI.
The BPMP ABI defines the message format for different modules or usages.
For example, the clock operation needs an MRQ service code called
MRQ_CLK with specific message format which includes different sub
commands for various clock operations. This is the message format that
BPMP can recognize.
So the user needs two things to initiate IPC between BPMP. Get the
service from the bpmp_ops structure and maintain the message format as
the BPMP ABI defined.
Based-on-the-work-by:
Sivaram Nair <sivaramn@nvidia.com>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
---
drivers/firmware/tegra/Kconfig | 12 +
drivers/firmware/tegra/Makefile | 1 +
drivers/firmware/tegra/bpmp.c | 713 +++++++++++++++++
include/soc/tegra/bpmp.h | 29 +
include/soc/tegra/bpmp_abi.h | 1601 +++++++++++++++++++++++++++++++++++++++
5 files changed, 2356 insertions(+)
create mode 100644 drivers/firmware/tegra/bpmp.c
create mode 100644 include/soc/tegra/bpmp.h
create mode 100644 include/soc/tegra/bpmp_abi.h
diff --git a/drivers/firmware/tegra/Kconfig b/drivers/firmware/tegra/Kconfig
index 1fa3e4e136a5..ff2730d5c468 100644
--- a/drivers/firmware/tegra/Kconfig
+++ b/drivers/firmware/tegra/Kconfig
@@ -10,4 +10,16 @@ config TEGRA_IVC
keeps the content is synchronization between host CPU and remote
processors.
+config TEGRA_BPMP
+ bool "Tegra BPMP driver"
+ depends on ARCH_TEGRA && TEGRA_HSP_MBOX && TEGRA_IVC
+ help
+ BPMP (Boot and Power Management Processor) is designed to off-loading
+ the PM functions which include clock/DVFS/thermal/power from the CPU.
+ It needs HSP as the HW synchronization and notification module and
+ IVC module as the message communication protocol.
+
+ This driver manages the IPC interface between host CPU and the
+ firmware running on BPMP.
+
endmenu
diff --git a/drivers/firmware/tegra/Makefile b/drivers/firmware/tegra/Makefile
index 92e2153e8173..e34a2f79e1ad 100644
--- a/drivers/firmware/tegra/Makefile
+++ b/drivers/firmware/tegra/Makefile
@@ -1 +1,2 @@
+obj-$(CONFIG_TEGRA_BPMP) += bpmp.o
obj-$(CONFIG_TEGRA_IVC) += ivc.o
diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c
new file mode 100644
index 000000000000..24fda626610e
--- /dev/null
+++ b/drivers/firmware/tegra/bpmp.c
@@ -0,0 +1,713 @@
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/mailbox_client.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/semaphore.h>
+
+#include <soc/tegra/bpmp.h>
+#include <soc/tegra/bpmp_abi.h>
+#include <soc/tegra/ivc.h>
+
+#define BPMP_MSG_SZ 128
+#define BPMP_MSG_DATA_SZ 120
+
+#define __MRQ_ATTRS 0xff000000
+#define __MRQ_INDEX(id) ((id) & ~__MRQ_ATTRS)
+
+#define DO_ACK BIT(0)
+#define RING_DOORBELL BIT(1)
+
+struct tegra_bpmp_soc_data {
+ u32 ch_index; /* channel index */
+ u32 thread_ch_index; /* thread channel index */
+ u32 cpu_rx_ch_index; /* CPU Rx channel index */
+ u32 nr_ch; /* number of total channels */
+ u32 nr_thread_ch; /* number of thread channels */
+ u32 ch_timeout; /* channel timeout */
+ u32 thread_ch_timeout; /* thread channel timeout */
+};
+
+struct channel_info {
+ u32 tch_free;
+ u32 tch_to_complete;
+ struct semaphore tch_sem;
+};
+
+struct mb_data {
+ s32 code;
+ s32 flags;
+ u8 data[BPMP_MSG_DATA_SZ];
+} __packed;
+
+struct channel_data {
+ struct mb_data *ib;
+ struct mb_data *ob;
+};
+
+struct mrq {
+ struct list_head list;
+ u32 mrq_code;
+ bpmp_mrq_handler handler;
+ void *data;
+};
+
+struct tegra_bpmp {
+ struct device *dev;
+ const struct tegra_bpmp_soc_data *soc_data;
+ void __iomem *tx_base;
+ void __iomem *rx_base;
+ struct mbox_client cl;
+ struct mbox_chan *chan;
+ struct ivc *ivc_channels;
+ struct channel_data *ch_area;
+ struct channel_info ch_info;
+ struct completion *ch_completion;
+ struct list_head mrq_list;
+ struct tegra_bpmp_ops *ops;
+ spinlock_t lock;
+ bool init_done;
+};
+
+static struct tegra_bpmp *bpmp;
+
+static int bpmp_get_thread_ch(int idx)
+{
+ return bpmp->soc_data->thread_ch_index + idx;
+}
+
+static int bpmp_get_thread_ch_index(int ch)
+{
+ if (ch < bpmp->soc_data->thread_ch_index ||
+ ch >= bpmp->soc_data->cpu_rx_ch_index)
+ return -1;
+ return ch - bpmp->soc_data->thread_ch_index;
+}
+
+static int bpmp_get_ob_channel(void)
+{
+ return smp_processor_id() + bpmp->soc_data->ch_index;
+}
+
+static struct completion *bpmp_get_completion_obj(int ch)
+{
+ int i = bpmp_get_thread_ch_index(ch);
+
+ return i < 0 ? NULL : bpmp->ch_completion + i;
+}
+
+static int bpmp_valid_txfer(void *ob_data, int ob_sz, void *ib_data, int ib_sz)
+{
+ return ob_sz >= 0 && ob_sz <= BPMP_MSG_DATA_SZ &&
+ ib_sz >= 0 && ib_sz <= BPMP_MSG_DATA_SZ &&
+ (!ob_sz || ob_data) && (!ib_sz || ib_data);
+}
+
+static bool bpmp_master_acked(int ch)
+{
+ struct ivc *ivc_chan;
+ void *frame;
+ bool ready;
+
+ ivc_chan = bpmp->ivc_channels + ch;
+ frame = tegra_ivc_read_get_next_frame(ivc_chan);
+ ready = !IS_ERR_OR_NULL(frame);
+ bpmp->ch_area[ch].ib = ready ? frame : NULL;
+
+ return ready;
+}
+
+static int bpmp_wait_ack(int ch)
+{
+ ktime_t t;
+
+ t = ns_to_ktime(local_clock());
+
+ do {
+ if (bpmp_master_acked(ch))
+ return 0;
+ } while (ktime_us_delta(ns_to_ktime(local_clock()), t) <
+ bpmp->soc_data->ch_timeout);
+
+ return -ETIMEDOUT;
+}
+
+static bool bpmp_master_free(int ch)
+{
+ struct ivc *ivc_chan;
+ void *frame;
+ bool ready;
+
+ ivc_chan = bpmp->ivc_channels + ch;
+ frame = tegra_ivc_write_get_next_frame(ivc_chan);
+ ready = !IS_ERR_OR_NULL(frame);
+ bpmp->ch_area[ch].ob = ready ? frame : NULL;
+
+ return ready;
+}
+
+static int bpmp_wait_master_free(int ch)
+{
+ ktime_t t;
+
+ t = ns_to_ktime(local_clock());
+
+ do {
+ if (bpmp_master_free(ch))
+ return 0;
+ } while (ktime_us_delta(ns_to_ktime(local_clock()), t)
+ < bpmp->soc_data->ch_timeout);
+
+ return -ETIMEDOUT;
+}
+
+static int __read_ch(int ch, void *data, int sz)
+{
+ struct ivc *ivc_chan;
+ struct mb_data *p;
+
+ ivc_chan = bpmp->ivc_channels + ch;
+ p = bpmp->ch_area[ch].ib;
+ if (data)
+ memcpy_fromio(data, p->data, sz);
+
+ return tegra_ivc_read_advance(ivc_chan);
+}
+
+static int bpmp_read_ch(int ch, void *data, int sz)
+{
+ unsigned long flags;
+ int i, ret;
+
+ i = bpmp_get_thread_ch_index(ch);
+
+ spin_lock_irqsave(&bpmp->lock, flags);
+ ret = __read_ch(ch, data, sz);
+ bpmp->ch_info.tch_free |= (1 << i);
+ spin_unlock_irqrestore(&bpmp->lock, flags);
+
+ up(&bpmp->ch_info.tch_sem);
+
+ return ret;
+}
+
+static int __write_ch(int ch, int mrq_code, int flags, void *data, int sz)
+{
+ struct ivc *ivc_chan;
+ struct mb_data *p;
+
+ ivc_chan = bpmp->ivc_channels + ch;
+ p = bpmp->ch_area[ch].ob;
+
+ p->code = mrq_code;
+ p->flags = flags;
+ if (data)
+ memcpy_toio(p->data, data, sz);
+
+ return tegra_ivc_write_advance(ivc_chan);
+}
+
+static int bpmp_write_threaded_ch(int *ch, int mrq_code, void *data, int sz)
+{
+ unsigned long flags;
+ int ret, i;
+
+ ret = down_timeout(&bpmp->ch_info.tch_sem,
+ usecs_to_jiffies(bpmp->soc_data->thread_ch_timeout));
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&bpmp->lock, flags);
+
+ i = __ffs(bpmp->ch_info.tch_free);
+ *ch = bpmp_get_thread_ch(i);
+ ret = bpmp_master_free(*ch) ? 0 : -EFAULT;
+ if (!ret) {
+ bpmp->ch_info.tch_free &= ~(1 << i);
+ __write_ch(*ch, mrq_code, DO_ACK | RING_DOORBELL, data, sz);
+ bpmp->ch_info.tch_to_complete |= (1 << *ch);
+ }
+
+ spin_unlock_irqrestore(&bpmp->lock, flags);
+
+ return ret;
+}
+
+static int bpmp_write_ch(int ch, int mrq_code, int flags, void *data, int sz)
+{
+ int ret;
+
+ ret = bpmp_wait_master_free(ch);
+ if (ret)
+ return ret;
+
+ return __write_ch(ch, mrq_code, flags, data, sz);
+}
+
+static int bpmp_send_receive_atomic(int mrq_code, void *ob_data, int ob_sz,
+ void *ib_data, int ib_sz)
+{
+ int ch, ret;
+
+ if (WARN_ON(!irqs_disabled()))
+ return -EPERM;
+
+ if (!bpmp_valid_txfer(ob_data, ob_sz, ib_data, ib_sz))
+ return -EINVAL;
+
+ if (!bpmp->init_done)
+ return -ENODEV;
+
+ ch = bpmp_get_ob_channel();
+ ret = bpmp_write_ch(ch, mrq_code, DO_ACK, ob_data, ob_sz);
+ if (ret)
+ return ret;
+
+ ret = mbox_send_message(bpmp->chan, NULL);
+ if (ret < 0)
+ return ret;
+ mbox_client_txdone(bpmp->chan, 0);
+
+ ret = bpmp_wait_ack(ch);
+ if (ret)
+ return ret;
+
+ return __read_ch(ch, ib_data, ib_sz);
+}
+
+static int bpmp_send_receive(int mrq_code, void *ob_data, int ob_sz,
+ void *ib_data, int ib_sz)
+{
+ struct completion *comp_obj;
+ unsigned long timeout;
+ int ch, ret;
+
+ if (WARN_ON(irqs_disabled()))
+ return -EPERM;
+
+ if (!bpmp_valid_txfer(ob_data, ob_sz, ib_data, ib_sz))
+ return -EINVAL;
+
+ if (!bpmp->init_done)
+ return -ENODEV;
+
+ ret = bpmp_write_threaded_ch(&ch, mrq_code, ob_data, ob_sz);
+ if (ret)
+ return ret;
+
+ ret = mbox_send_message(bpmp->chan, NULL);
+ if (ret < 0)
+ return ret;
+ mbox_client_txdone(bpmp->chan, 0);
+
+ comp_obj = bpmp_get_completion_obj(ch);
+ timeout = usecs_to_jiffies(bpmp->soc_data->thread_ch_timeout);
+ if (!wait_for_completion_timeout(comp_obj, timeout))
+ return -ETIMEDOUT;
+
+ return bpmp_read_ch(ch, ib_data, ib_sz);
+}
+
+static struct mrq *bpmp_find_mrq(u32 mrq_code)
+{
+ struct mrq *mrq;
+
+ list_for_each_entry(mrq, &bpmp->mrq_list, list) {
+ if (mrq_code == mrq->mrq_code)
+ return mrq;
+ }
+
+ return NULL;
+}
+
+static void bpmp_mrq_return_data(int ch, int code, void *data, int sz)
+{
+ int flags = bpmp->ch_area[ch].ib->flags;
+ struct ivc *ivc_chan;
+ struct mb_data *frame;
+ int ret;
+
+ if (WARN_ON(sz > BPMP_MSG_DATA_SZ))
+ return;
+
+ ivc_chan = bpmp->ivc_channels + ch;
+ ret = tegra_ivc_read_advance(ivc_chan);
+ WARN_ON(ret);
+
+ if (!(flags & DO_ACK))
+ return;
+
+ frame = tegra_ivc_write_get_next_frame(ivc_chan);
+ if (IS_ERR_OR_NULL(frame)) {
+ WARN_ON(1);
+ return;
+ }
+
+ frame->code = code;
+ if (data != NULL)
+ memcpy_toio(frame->data, data, sz);
+ ret = tegra_ivc_write_advance(ivc_chan);
+ WARN_ON(ret);
+
+ if (flags & RING_DOORBELL) {
+ ret = mbox_send_message(bpmp->chan, NULL);
+ if (ret < 0) {
+ WARN_ON(1);
+ return;
+ }
+ mbox_client_txdone(bpmp->chan, 0);
+ }
+}
+
+static void bpmp_mail_return(int ch, int ret_code, int val)
+{
+ bpmp_mrq_return_data(ch, ret_code, &val, sizeof(val));
+}
+
+static void bpmp_handle_mrq(int mrq_code, int ch)
+{
+ struct mrq *mrq;
+
+ spin_lock(&bpmp->lock);
+
+ mrq = bpmp_find_mrq(mrq_code);
+ if (!mrq) {
+ spin_unlock(&bpmp->lock);
+ bpmp_mail_return(ch, -EINVAL, 0);
+ return;
+ }
+
+ mrq->handler(mrq_code, mrq->data, ch);
+
+ spin_unlock(&bpmp->lock);
+}
+
+static int bpmp_request_mrq(int mrq_code, bpmp_mrq_handler handler, void *data)
+{
+ struct mrq *mrq;
+ unsigned long flags;
+
+ if (!handler)
+ return -EINVAL;
+
+ mrq = devm_kzalloc(bpmp->dev, sizeof(*mrq), GFP_KERNEL);
+ if (!mrq)
+ return -ENOMEM;
+
+ spin_lock_irqsave(&bpmp->lock, flags);
+
+ mrq->mrq_code = __MRQ_INDEX(mrq_code);
+ mrq->handler = handler;
+ mrq->data = data;
+ list_add(&mrq->list, &bpmp->mrq_list);
+
+ spin_unlock_irqrestore(&bpmp->lock, flags);
+
+ return 0;
+}
+
+static void bpmp_mrq_handle_ping(int mrq_code, void *data, int ch)
+{
+ int challenge;
+ int reply;
+
+ challenge = *(int *)bpmp->ch_area[ch].ib->data;
+ reply = challenge << (smp_processor_id() + 1);
+ bpmp_mail_return(ch, 0, reply);
+}
+
+static int bpmp_mailman_init(void)
+{
+ return bpmp_request_mrq(MRQ_PING, bpmp_mrq_handle_ping, NULL);
+}
+
+static int bpmp_ping(void)
+{
+ unsigned long flags;
+ ktime_t t;
+ int challenge = 1;
+ int reply = 0;
+ int ret;
+
+ t = ktime_get();
+ local_irq_save(flags);
+ ret = bpmp_send_receive_atomic(MRQ_PING, &challenge, sizeof(challenge),
+ &reply, sizeof(reply));
+ local_irq_restore(flags);
+ t = ktime_sub(ktime_get(), t);
+
+ if (!ret)
+ dev_info(bpmp->dev,
+ "ping ok: challenge: %d, reply: %d, time: %lld\n",
+ challenge, reply, ktime_to_us(t));
+
+ return ret;
+}
+
+static int bpmp_get_fwtag(void)
+{
+ unsigned long flags;
+ void *vaddr;
+ dma_addr_t paddr;
+ u32 addr;
+ int ret;
+
+ vaddr = dma_alloc_coherent(bpmp->dev, BPMP_MSG_DATA_SZ, &paddr,
+ GFP_KERNEL);
+ if (!vaddr)
+ return -ENOMEM;
+ addr = paddr;
+
+ local_irq_save(flags);
+ ret = bpmp_send_receive_atomic(MRQ_QUERY_TAG, &addr, sizeof(addr),
+ NULL, 0);
+ local_irq_restore(flags);
+
+ if (!ret)
+ dev_info(bpmp->dev, "fwtag: %s\n", (char *)vaddr);
+
+ dma_free_coherent(bpmp->dev, BPMP_MSG_DATA_SZ, vaddr, paddr);
+
+ return ret;
+}
+
+static void bpmp_signal_thread(int ch)
+{
+ int flags = bpmp->ch_area[ch].ob->flags;
+ struct completion *comp_obj;
+
+ if (!(flags & RING_DOORBELL))
+ return;
+
+ comp_obj = bpmp_get_completion_obj(ch);
+ if (!comp_obj) {
+ WARN_ON(1);
+ return;
+ }
+
+ complete(comp_obj);
+}
+
+static void bpmp_handle_rx(struct mbox_client *cl, void *data)
+{
+ int i, rx_ch;
+
+ rx_ch = bpmp->soc_data->cpu_rx_ch_index;
+
+ if (bpmp_master_acked(rx_ch))
+ bpmp_handle_mrq(bpmp->ch_area[rx_ch].ib->code, rx_ch);
+
+ spin_lock(&bpmp->lock);
+
+ for (i = 0; i < bpmp->soc_data->nr_thread_ch &&
+ bpmp->ch_info.tch_to_complete; i++) {
+ int ch = bpmp_get_thread_ch(i);
+
+ if ((bpmp->ch_info.tch_to_complete & (1 << ch)) &&
+ bpmp_master_acked(ch)) {
+ bpmp->ch_info.tch_to_complete &= ~(1 << ch);
+ bpmp_signal_thread(ch);
+ }
+ }
+
+ spin_unlock(&bpmp->lock);
+}
+
+static void bpmp_ivc_notify(struct ivc *ivc)
+{
+ int ret;
+
+ ret = mbox_send_message(bpmp->chan, NULL);
+ if (ret < 0)
+ return;
+
+ mbox_send_message(bpmp->chan, NULL);
+}
+
+static int bpmp_msg_chan_init(int ch)
+{
+ struct ivc *ivc_chan;
+ u32 hdr_sz, msg_sz, que_sz;
+ uintptr_t rx_base, tx_base;
+ int ret;
+
+ msg_sz = tegra_ivc_align(BPMP_MSG_SZ);
+ hdr_sz = tegra_ivc_total_queue_size(0);
+ que_sz = tegra_ivc_total_queue_size(msg_sz);
+
+ rx_base = (uintptr_t)(bpmp->rx_base + que_sz * ch);
+ tx_base = (uintptr_t)(bpmp->tx_base + que_sz * ch);
+
+ ivc_chan = bpmp->ivc_channels + ch;
+ ret = tegra_ivc_init(ivc_chan, rx_base, DMA_ERROR_CODE, tx_base,
+ DMA_ERROR_CODE, 1, msg_sz, bpmp->dev,
+ bpmp_ivc_notify);
+ if (ret) {
+ dev_err(bpmp->dev, "%s fail: ch %d returned %d\n",
+ __func__, ch, ret);
+ return ret;
+ }
+
+ /* reset the channel state */
+ tegra_ivc_channel_reset(ivc_chan);
+
+ /* sync the channel state with BPMP */
+ while (tegra_ivc_channel_notified(ivc_chan))
+ ;
+
+ return 0;
+}
+
+struct tegra_bpmp_ops *tegra_bpmp_get_ops(void)
+{
+ if (bpmp->init_done && bpmp->ops)
+ return bpmp->ops;
+ return NULL;
+}
+EXPORT_SYMBOL(tegra_bpmp_get_ops);
+
+static struct tegra_bpmp_ops bpmp_ops = {
+ .send_receive = bpmp_send_receive,
+ .send_receive_atomic = bpmp_send_receive_atomic,
+ .request_mrq = bpmp_request_mrq,
+ .mrq_return = bpmp_mail_return,
+};
+
+static const struct tegra_bpmp_soc_data soc_data_tegra186 = {
+ .ch_index = 0,
+ .thread_ch_index = 6,
+ .cpu_rx_ch_index = 13,
+ .nr_ch = 14,
+ .nr_thread_ch = 7,
+ .ch_timeout = 60 * USEC_PER_SEC,
+ .thread_ch_timeout = 600 * USEC_PER_SEC,
+};
+
+static const struct of_device_id tegra_bpmp_match[] = {
+ { .compatible = "nvidia,tegra186-bpmp", .data = &soc_data_tegra186 },
+ { }
+};
+
+static int tegra_bpmp_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct resource shmem_res;
+ struct device_node *shmem_np;
+ int i, ret;
+
+ bpmp = devm_kzalloc(&pdev->dev, sizeof(*bpmp), GFP_KERNEL);
+ if (!bpmp)
+ return -ENOMEM;
+ bpmp->dev = &pdev->dev;
+
+ match = of_match_device(tegra_bpmp_match, &pdev->dev);
+ if (!match)
+ return -EINVAL;
+ bpmp->soc_data = match->data;
+
+ shmem_np = of_parse_phandle(pdev->dev.of_node, "shmem", 0);
+ of_address_to_resource(shmem_np, 0, &shmem_res);
+ bpmp->tx_base = devm_ioremap_resource(&pdev->dev, &shmem_res);
+ if (IS_ERR(bpmp->tx_base))
+ return PTR_ERR(bpmp->tx_base);
+
+ shmem_np = of_parse_phandle(pdev->dev.of_node, "shmem", 1);
+ of_address_to_resource(shmem_np, 0, &shmem_res);
+ bpmp->rx_base = devm_ioremap_resource(&pdev->dev, &shmem_res);
+ if (IS_ERR(bpmp->rx_base))
+ return PTR_ERR(bpmp->rx_base);
+
+ bpmp->ivc_channels = devm_kcalloc(&pdev->dev, bpmp->soc_data->nr_ch,
+ sizeof(*bpmp->ivc_channels),
+ GFP_KERNEL);
+ if (!bpmp->ivc_channels)
+ return -ENOMEM;
+
+ bpmp->ch_area = devm_kcalloc(&pdev->dev, bpmp->soc_data->nr_ch,
+ sizeof(*bpmp->ch_area), GFP_KERNEL);
+ if (!bpmp->ch_area)
+ return -ENOMEM;
+
+ bpmp->ch_completion = devm_kcalloc(&pdev->dev,
+ bpmp->soc_data->nr_thread_ch,
+ sizeof(*bpmp->ch_completion),
+ GFP_KERNEL);
+ if (!bpmp->ch_completion)
+ return -ENOMEM;
+
+ /* mbox registration */
+ bpmp->cl.dev = &pdev->dev;
+ bpmp->cl.rx_callback = bpmp_handle_rx;
+ bpmp->cl.tx_block = false;
+ bpmp->cl.knows_txdone = false;
+ bpmp->chan = mbox_request_channel(&bpmp->cl, 0);
+ if (IS_ERR(bpmp->chan)) {
+ if (PTR_ERR(bpmp->chan) != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "fail to get HSP mailbox, bpmp init fail.\n");
+ return PTR_ERR(bpmp->chan);
+ }
+
+ /* message channel initialization */
+ for (i = 0; i < bpmp->soc_data->nr_ch; i++) {
+ struct completion *comp_obj;
+
+ ret = bpmp_msg_chan_init(i);
+ if (ret)
+ return ret;
+
+ comp_obj = bpmp_get_completion_obj(i);
+ if (comp_obj)
+ init_completion(comp_obj);
+ }
+
+ bpmp->ch_info.tch_free = (1 << bpmp->soc_data->nr_thread_ch) - 1;
+ sema_init(&bpmp->ch_info.tch_sem, bpmp->soc_data->nr_thread_ch);
+
+ spin_lock_init(&bpmp->lock);
+ INIT_LIST_HEAD(&bpmp->mrq_list);
+ if (bpmp_mailman_init())
+ return -ENODEV;
+
+ bpmp->init_done = true;
+
+ ret = bpmp_ping();
+ if (ret)
+ dev_err(&pdev->dev, "ping failed: %d\n", ret);
+
+ ret = bpmp_get_fwtag();
+ if (ret)
+ dev_err(&pdev->dev, "get fwtag failed: %d\n", ret);
+
+ /* BPMP is ready now. */
+ bpmp->ops = &bpmp_ops;
+
+ return 0;
+}
+
+static struct platform_driver tegra_bpmp_driver = {
+ .driver = {
+ .name = "tegra-bpmp",
+ .of_match_table = tegra_bpmp_match,
+ },
+ .probe = tegra_bpmp_probe,
+};
+
+static int __init tegra_bpmp_init(void)
+{
+ return platform_driver_register(&tegra_bpmp_driver);
+}
+core_initcall(tegra_bpmp_init);
diff --git a/include/soc/tegra/bpmp.h b/include/soc/tegra/bpmp.h
new file mode 100644
index 000000000000..aaa0ef34ad7b
--- /dev/null
+++ b/include/soc/tegra/bpmp.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __TEGRA_BPMP_H
+
+typedef void (*bpmp_mrq_handler)(int mrq_code, void *data, int ch);
+
+struct tegra_bpmp_ops {
+ int (*send_receive)(int mrq_code, void *ob_data, int ob_sz,
+ void *ib_data, int ib_sz);
+ int (*send_receive_atomic)(int mrq_code, void *ob_data, int ob_sz,
+ void *ib_data, int ib_sz);
+ int (*request_mrq)(int mrq_code, bpmp_mrq_handler handler, void *data);
+ void (*mrq_return)(int ch, int ret_code, int val);
+};
+
+struct tegra_bpmp_ops *tegra_bpmp_get_ops(void);
+
+#endif /* __TEGRA_BPMP_H */
diff --git a/include/soc/tegra/bpmp_abi.h b/include/soc/tegra/bpmp_abi.h
new file mode 100644
index 000000000000..0aaef5960e29
--- /dev/null
+++ b/include/soc/tegra/bpmp_abi.h
@@ -0,0 +1,1601 @@
+/*
+ * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ABI_BPMP_ABI_H_
+#define _ABI_BPMP_ABI_H_
+
+#ifdef LK
+#include <stdint.h>
+#endif
+
+#ifndef __ABI_PACKED
+#define __ABI_PACKED __attribute__((packed))
+#endif
+
+#ifdef NO_GCC_EXTENSIONS
+#define EMPTY char empty;
+#define EMPTY_ARRAY 1
+#else
+#define EMPTY
+#define EMPTY_ARRAY 0
+#endif
+
+#ifndef __UNION_ANON
+#define __UNION_ANON
+#endif
+/**
+ * @file
+ */
+
+
+/**
+ * @defgroup MRQ MRQ Messages
+ * @brief Messages sent to/from BPMP via IPC
+ * @{
+ * @defgroup MRQ_Format Message Format
+ * @defgroup MRQ_Codes Message Request (MRQ) Codes
+ * @defgroup MRQ_Payloads Message Payloads
+ * @defgroup Error_Codes Error Codes
+ * @}
+ */
+
+/**
+ * @addtogroup MRQ_Format Message Format
+ * @{
+ * The CPU requests the BPMP to perform a particular service by
+ * sending it an IVC frame containing a single MRQ message. An MRQ
+ * message consists of a @ref mrq_request followed by a payload whose
+ * format depends on mrq_request::mrq.
+ *
+ * The BPMP processes the data and replies with an IVC frame (on the
+ * same IVC channel) containing and MRQ response. An MRQ response
+ * consists of a @ref mrq_response followed by a payload whose format
+ * depends on the associated mrq_request::mrq.
+ *
+ * A well-defined subset of the MRQ messages that the CPU sends to the
+ * BPMP can lead to BPMP eventually sending an MRQ message to the
+ * CPU. For example, when the CPU uses an #MRQ_THERMAL message to set
+ * a thermal trip point, the BPMP may eventually send a single
+ * #MRQ_THERMAL message of its own to the CPU indicating that the trip
+ * point has been crossed.
+ * @}
+ */
+
+/**
+ * @ingroup MRQ_Format
+ * @brief header for an MRQ message
+ *
+ * Provides the MRQ number for the MRQ message: #mrq. The remainder of
+ * the MRQ message is a payload (immediately following the
+ * mrq_request) whose format depends on mrq.
+ *
+ * @todo document the flags
+ */
+struct mrq_request {
+ /** @brief MRQ number of the request */
+ uint32_t mrq;
+ /** @brief flags for the request */
+ uint32_t flags;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Format
+ * @brief header for an MRQ response
+ *
+ * Provides an error code for the associated MRQ message. The
+ * remainder of the MRQ response is a payload (immediately following
+ * the mrq_response) whose format depends on the associated
+ * mrq_request::mrq
+ *
+ * @todo document the flags
+ */
+struct mrq_response {
+ /** @brief error code for the MRQ request itself */
+ int32_t err;
+ /** @brief flags for the response */
+ uint32_t flags;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Format
+ * Minimum needed size for an IPC message buffer
+ */
+#define MSG_MIN_SZ 128
+/**
+ * @ingroup MRQ_Format
+ * Minimum size guaranteed for data in an IPC message buffer
+ */
+#define MSG_DATA_MIN_SZ 120
+
+/**
+ * @ingroup MRQ_Codes
+ * @name Legal MRQ codes
+ * These are the legal values for mrq_request::mrq
+ * @{
+ */
+
+#define MRQ_PING 0
+#define MRQ_QUERY_TAG 1
+#define MRQ_MODULE_LOAD 4
+#define MRQ_MODULE_UNLOAD 5
+#define MRQ_TRACE_MODIFY 7
+#define MRQ_WRITE_TRACE 8
+#define MRQ_THREADED_PING 9
+#define MRQ_MODULE_MAIL 11
+#define MRQ_DEBUGFS 19
+#define MRQ_RESET 20
+#define MRQ_I2C 21
+#define MRQ_CLK 22
+#define MRQ_QUERY_ABI 23
+#define MRQ_PG_READ_STATE 25
+#define MRQ_PG_UPDATE_STATE 26
+#define MRQ_THERMAL 27
+#define MRQ_CPU_VHINT 28
+#define MRQ_ABI_RATCHET 29
+#define MRQ_EMC_DVFS_LATENCY 31
+#define MRQ_TRACE_ITER 64
+
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @brief Maximum MRQ code to be sent by CPU software to
+ * BPMP. Subject to change in future
+ */
+#define MAX_CPU_MRQ_ID 64
+
+/**
+ * @addtogroup MRQ_Payloads Message Payloads
+ * @{
+ * @defgroup Ping
+ * @defgroup Query_Tag Query Tag
+ * @defgroup Module Loadable Modules
+ * @defgroup Trace
+ * @defgroup Debugfs
+ * @defgroup Reset
+ * @defgroup I2C
+ * @defgroup Clocks
+ * @defgroup ABI_info ABI Info
+ * @defgroup MC_Flush MC Flush
+ * @defgroup Powergating
+ * @defgroup Thermal
+ * @defgroup Vhint CPU Voltage hint
+ * @defgroup MRQ_Deprecated Deprecated MRQ messages
+ * @defgroup EMC
+ * @}
+ */
+
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_PING
+ * @brief A simple ping
+ *
+ * * Platforms: All
+ * * Initiators: Any
+ * * Targets: Any
+ * * Request Payload: @ref mrq_ping_request
+ * * Response Payload: @ref mrq_ping_response
+ *
+ * @ingroup MRQ_Codes
+ * @def MRQ_THREADED_PING
+ * @brief A deeper ping
+ *
+ * * Platforms: All
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_ping_request
+ * * Response Payload: @ref mrq_ping_response
+ *
+ * Behavior is equivalent to a simple #MRQ_PING except that BPMP
+ * responds from a thread context (providing a slightly more robust
+ * sign of life).
+ *
+ */
+
+/**
+ * @ingroup Ping
+ * @brief request with #MRQ_PING
+ *
+ * Used by the sender of an #MRQ_PING message to request a pong from
+ * recipient. The response from the recipient is computed based on
+ * #challenge.
+ */
+struct mrq_ping_request {
+/** @brief arbitrarily chosen value */
+ uint32_t challenge;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Ping
+ * @brief response to #MRQ_PING
+ *
+ * Sent in response to an #MRQ_PING message. #reply should be the
+ * mrq_ping_request challenge left shifted by 1 with the carry-bit
+ * dropped.
+ *
+ */
+struct mrq_ping_response {
+ /** @brief response to the MRQ_PING challege */
+ uint32_t reply;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_QUERY_TAG
+ * @brief Query BPMP firmware's tag (i.e. version information)
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_query_tag_request
+ * * Response Payload: N/A
+ *
+ */
+
+/**
+ * @ingroup Query_Tag
+ * @brief request with #MRQ_QUERY_TAG
+ *
+ * Used by #MRQ_QUERY_TAG call to ask BPMP to fill in the memory
+ * pointed by #addr with BPMP firmware header.
+ *
+ * The sender is reponsible for ensuring that #addr is mapped in to
+ * the recipient's address map.
+ */
+struct mrq_query_tag_request {
+ /** @brief base address to store the firmware header */
+ uint32_t addr;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_MODULE_LOAD
+ * @brief dynamically load a BPMP code module
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_module_load_request
+ * * Response Payload: @ref mrq_module_load_response
+ *
+ * @note This MRQ is disabled on production systems
+ *
+ */
+
+/**
+ * @ingroup Module
+ * @brief request with #MRQ_MODULE_LOAD
+ *
+ * Used by #MRQ_MODULE_LOAD calls to ask the recipient to dynamically
+ * load the code located at #phys_addr and having size #size
+ * bytes. #phys_addr is treated as a void pointer.
+ *
+ * The recipient copies the code from #phys_addr to locally allocated
+ * memory prior to responding to this message.
+ *
+ * @todo document the module header format
+ *
+ * The sender is responsible for ensuring that the code is mapped in
+ * the recipient's address map.
+ *
+ */
+struct mrq_module_load_request {
+ /** @brief base address of the code to load. Treated as (void *) */
+ uint32_t phys_addr; /* (void *) */
+ /** @brief size in bytes of code to load */
+ uint32_t size;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Module
+ * @brief response to #MRQ_MODULE_LOAD
+ *
+ * @todo document mrq_response::err
+ */
+struct mrq_module_load_response {
+ /** @brief handle to the loaded module */
+ uint32_t base;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_MODULE_UNLOAD
+ * @brief unload a previously loaded code module
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_module_unload_request
+ * * Response Payload: N/A
+ *
+ * @note This MRQ is disabled on production systems
+ */
+
+/**
+ * @ingroup Module
+ * @brief request with #MRQ_MODULE_UNLOAD
+ *
+ * Used by #MRQ_MODULE_UNLOAD calls to request that a previously loaded
+ * module be unloaded.
+ */
+struct mrq_module_unload_request {
+ /** @brief handle of the module to unload */
+ uint32_t base;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_TRACE_MODIFY
+ * @brief modify the set of enabled trace events
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_trace_modify_request
+ * * Response Payload: @ref mrq_trace_modify_response
+ *
+ * @note This MRQ is disabled on production systems
+ */
+
+/**
+ * @ingroup Trace
+ * @brief request with #MRQ_TRACE_MODIFY
+ *
+ * Used by %MRQ_TRACE_MODIFY calls to enable or disable specify trace
+ * events. #set takes precedence for any bit set in both #set and
+ * #clr.
+ */
+struct mrq_trace_modify_request {
+ /** @brief bit mask of trace events to disable */
+ uint32_t clr;
+ /** @brief bit mask of trace events to enable */
+ uint32_t set;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Trace
+ * @brief response to #MRQ_TRACE_MODIFY
+ *
+ * Sent in repsonse to an #MRQ_TRACE_MODIFY message. #mask reflects the
+ * state of which events are enabled after the recipient acted on the
+ * message.
+ *
+ */
+struct mrq_trace_modify_response {
+ /** @brief bit mask of trace event enable states */
+ uint32_t mask;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_WRITE_TRACE
+ * @brief Write trace data to a buffer
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_write_trace_request
+ * * Response Payload: @ref mrq_write_trace_response
+ *
+ * mrq_response::err depends on the @ref mrq_write_trace_request field
+ * values. err is -#BPMP_EINVAL if size is zero or area is NULL or
+ * area is in an illegal range. A positive value for err indicates the
+ * number of bytes written to area.
+ *
+ * @note This MRQ is disabled on production systems
+ */
+
+/**
+ * @ingroup Trace
+ * @brief request with #MRQ_WRITE_TRACE
+ *
+ * Used by MRQ_WRITE_TRACE calls to ask the recipient to copy trace
+ * data from the recipient's local buffer to the output buffer. #area
+ * is treated as a byte-aligned pointer in the recipient's address
+ * space.
+ *
+ * The sender is responsible for ensuring that the output
+ * buffer is mapped in the recipient's address map. The recipient is
+ * responsible for protecting its own code and data from accidental
+ * overwrites.
+ */
+struct mrq_write_trace_request {
+ /** @brief base address of output buffer */
+ uint32_t area;
+ /** @brief size in bytes of the output buffer */
+ uint32_t size;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Trace
+ * @brief response to #MRQ_WRITE_TRACE
+ *
+ * Once this response is sent, the respondent will not access the
+ * output buffer further.
+ */
+struct mrq_write_trace_response {
+ /**
+ * @brief flag whether more data remains in local buffer
+ *
+ * Value is 1 if the entire local trace buffer has been
+ * drained to the outputbuffer. Value is 0 otherwise.
+ */
+ uint32_t eof;
+} __ABI_PACKED;
+
+/** @private */
+struct mrq_threaded_ping_request {
+ uint32_t challenge;
+} __ABI_PACKED;
+
+/** @private */
+struct mrq_threaded_ping_response {
+ uint32_t reply;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_MODULE_MAIL
+ * @brief send a message to a loadable module
+ *
+ * * Platforms: All
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_module_mail_request
+ * * Response Payload: @ref mrq_module_mail_response
+ *
+ * @note This MRQ is disabled on production systems
+ */
+
+/**
+ * @ingroup Module
+ * @brief request with #MRQ_MODULE_MAIL
+ */
+struct mrq_module_mail_request {
+ /** @brief handle to the previously loaded module */
+ uint32_t base;
+ /** @brief module-specific mail payload
+ *
+ * The length of data[ ] is unknown to the BPMP core firmware
+ * but it is limited to the size of an IPC message.
+ */
+ uint8_t data[EMPTY_ARRAY];
+} __ABI_PACKED;
+
+/**
+ * @ingroup Module
+ * @brief response to #MRQ_MODULE_MAIL
+ */
+struct mrq_module_mail_response {
+ /** @brief module-specific mail payload
+ *
+ * The length of data[ ] is unknown to the BPMP core firmware
+ * but it is limited to the size of an IPC message.
+ */
+ uint8_t data[EMPTY_ARRAY];
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_DEBUGFS
+ * @brief Interact with BPMP's debugfs file nodes
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_debugfs_request
+ * * Response Payload: @ref mrq_debugfs_response
+ */
+
+/**
+ * @addtogroup Debugfs
+ * @{
+ *
+ * The BPMP firmware implements a pseudo-filesystem called
+ * debugfs. Any driver within the firmware may register with debugfs
+ * to expose an arbitrary set of "files" in the filesystem. When
+ * software on the CPU writes to a debugfs file, debugfs passes the
+ * written data to a callback provided by the driver. When software on
+ * the CPU reads a debugfs file, debugfs queries the driver for the
+ * data to return to the CPU. The intention of the debugfs filesystem
+ * is to provide information useful for debugging the system at
+ * runtime.
+ *
+ * @note The files exposed via debugfs are not part of the
+ * BPMP firmware's ABI. debugfs files may be added or removed in any
+ * given version of the firmware. Typically the semantics of a debugfs
+ * file are consistent from version to version but even that is not
+ * guaranteed.
+ *
+ * @}
+ */
+/** @ingroup Debugfs */
+enum mrq_debugfs_commands {
+ CMD_DEBUGFS_READ = 1,
+ CMD_DEBUGFS_WRITE = 2,
+ CMD_DEBUGFS_DUMPDIR = 3,
+ CMD_DEBUGFS_MAX
+};
+
+/**
+ * @ingroup Debugfs
+ * @brief parameters for CMD_DEBUGFS_READ/WRITE command
+ */
+struct cmd_debugfs_fileop_request {
+ /** @brief physical address pointing at filename */
+ uint32_t fnameaddr;
+ /** @brief length in bytes of filename buffer */
+ uint32_t fnamelen;
+ /** @brief physical address pointing to data buffer */
+ uint32_t dataaddr;
+ /** @brief length in bytes of data buffer */
+ uint32_t datalen;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ * @brief parameters for CMD_DEBUGFS_READ/WRITE command
+ */
+struct cmd_debugfs_dumpdir_request {
+ /** @brief physical address pointing to data buffer */
+ uint32_t dataaddr;
+ /** @brief length in bytes of data buffer */
+ uint32_t datalen;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ * @brief response data for CMD_DEBUGFS_READ/WRITE command
+ */
+struct cmd_debugfs_fileop_response {
+ /** @brief always 0 */
+ uint32_t reserved;
+ /** @brief number of bytes read from or written to data buffer */
+ uint32_t nbytes;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ * @brief response data for CMD_DEBUGFS_DUMPDIR command
+ */
+struct cmd_debugfs_dumpdir_response {
+ /** @brief always 0 */
+ uint32_t reserved;
+ /** @brief number of bytes read from or written to data buffer */
+ uint32_t nbytes;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ * @brief request with #MRQ_DEBUGFS.
+ *
+ * The sender of an MRQ_DEBUGFS message uses #cmd to specify a debugfs
+ * command to execute. Legal commands are the values of @ref
+ * mrq_debugfs_commands. Each command requires a specific additional
+ * payload of data.
+ *
+ * |command |payload|
+ * |-------------------|-------|
+ * |CMD_DEBUGFS_READ |fop |
+ * |CMD_DEBUGFS_WRITE |fop |
+ * |CMD_DEBUGFS_DUMPDIR|dumpdir|
+ */
+struct mrq_debugfs_request {
+ uint32_t cmd;
+ union {
+ struct cmd_debugfs_fileop_request fop;
+ struct cmd_debugfs_dumpdir_request dumpdir;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ */
+struct mrq_debugfs_response {
+ /** @brief always 0 */
+ int32_t reserved;
+ union {
+ /** @brief response data for CMD_DEBUGFS_READ OR
+ * CMD_DEBUGFS_WRITE command
+ */
+ struct cmd_debugfs_fileop_response fop;
+ /** @brief response data for CMD_DEBUGFS_DUMPDIR command */
+ struct cmd_debugfs_dumpdir_response dumpdir;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @addtogroup Debugfs
+ * @{
+ */
+#define DEBUGFS_S_ISDIR (1 << 9)
+#define DEBUGFS_S_IRUSR (1 << 8)
+#define DEBUGFS_S_IWUSR (1 << 7)
+/** @} */
+
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_RESET
+ * @brief reset an IP block
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_reset_request
+ * * Response Payload: N/A
+ */
+
+/**
+ * @ingroup Reset
+ */
+enum mrq_reset_commands {
+ CMD_RESET_ASSERT = 1,
+ CMD_RESET_DEASSERT = 2,
+ CMD_RESET_MODULE = 3,
+ CMD_RESET_MAX, /* not part of ABI and subject to change */
+};
+
+/**
+ * @ingroup Reset
+ * @brief request with MRQ_RESET
+ *
+ * Used by the sender of an #MRQ_RESET message to request BPMP to
+ * assert or or deassert a given reset line.
+ */
+struct mrq_reset_request {
+ /** @brief reset action to perform (@enum mrq_reset_commands) */
+ uint32_t cmd;
+ /** @brief id of the reset to affected */
+ uint32_t reset_id;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_I2C
+ * @brief issue an i2c transaction
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_i2c_request
+ * * Response Payload: @ref mrq_i2c_response
+ */
+
+/**
+ * @addtogroup I2C
+ * @{
+ */
+#define TEGRA_I2C_IPC_MAX_IN_BUF_SIZE (MSG_DATA_MIN_SZ - 12)
+#define TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE (MSG_DATA_MIN_SZ - 4)
+/** @} */
+
+/**
+ * @ingroup I2C
+ * @name Serial I2C flags
+ * Use these flags with serial_i2c_request::flags
+ * @{
+ */
+#define SERIALI2C_TEN 0x0010
+#define SERIALI2C_RD 0x0001
+#define SERIALI2C_STOP 0x8000
+#define SERIALI2C_NOSTART 0x4000
+#define SERIALI2C_REV_DIR_ADDR 0x2000
+#define SERIALI2C_IGNORE_NAK 0x1000
+#define SERIALI2C_NO_RD_ACK 0x0800
+#define SERIALI2C_RECV_LEN 0x0400
+/** @} */
+/** @ingroup I2C */
+enum {
+ CMD_I2C_XFER = 1
+};
+
+/**
+ * @ingroup I2C
+ * @brief serializable i2c request
+ *
+ * Instances of this structure are packed (little-endian) into
+ * cmd_i2c_xfer_request::data_buf. Each instance represents a single
+ * transaction (or a portion of a transaction with repeated starts) on
+ * an i2c bus.
+ *
+ * Because these structures are packed, some instances are likely to
+ * be misaligned. Additionally because #data is variable length, it is
+ * not possible to iterate through a serialized list of these
+ * structures without inspecting #len in each instance. It may be
+ * easier to serialize or deserialize cmd_i2c_xfer_request::data_buf
+ * manually rather than using this structure definition.
+*/
+struct serial_i2c_request {
+ /** @brief I2C slave address */
+ uint16_t addr;
+ /** @brief bitmask of SERIALI2C_ flags */
+ uint16_t flags;
+ /** @brief length of I2C transaction in bytes */
+ uint16_t len;
+ /** @brief for write transactions only, #len bytes of data */
+ uint8_t data[];
+} __ABI_PACKED;
+
+/**
+ * @ingroup I2C
+ * @brief trigger one or more i2c transactions
+ */
+struct cmd_i2c_xfer_request {
+ /** @brief valid bus number from mach-t186/i2c-t186.h*/
+ uint32_t bus_id;
+
+ /** @brief count of valid bytes in #data_buf*/
+ uint32_t data_size;
+
+ /** @brief serialized packed instances of @ref serial_i2c_request*/
+ uint8_t data_buf[TEGRA_I2C_IPC_MAX_IN_BUF_SIZE];
+} __ABI_PACKED;
+
+/**
+ * @ingroup I2C
+ * @brief container for data read from the i2c bus
+ *
+ * Processing an cmd_i2c_xfer_request::data_buf causes BPMP to execute
+ * zero or more I2C reads. The data read from the bus is serialized
+ * into #data_buf.
+ */
+struct cmd_i2c_xfer_response {
+ /** @brief count of valid bytes in #data_buf*/
+ uint32_t data_size;
+ /** @brief i2c read data */
+ uint8_t data_buf[TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE];
+} __ABI_PACKED;
+
+/**
+ * @ingroup I2C
+ * @brief request with #MRQ_I2C
+ */
+struct mrq_i2c_request {
+ /** @brief always CMD_I2C_XFER (i.e. 1) */
+ uint32_t cmd;
+ /** @brief parameters of the transfer request */
+ struct cmd_i2c_xfer_request xfer;
+} __ABI_PACKED;
+
+/**
+ * @ingroup I2C
+ * @brief response to #MRQ_I2C
+ */
+struct mrq_i2c_response {
+ struct cmd_i2c_xfer_response xfer;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_CLK
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_clk_request
+ * * Response Payload: @ref mrq_clk_response
+ * @addtogroup Clocks
+ * @{
+ */
+
+/**
+ * @name MRQ_CLK sub-commands
+ * @{
+ */
+enum {
+ CMD_CLK_GET_RATE = 1,
+ CMD_CLK_SET_RATE = 2,
+ CMD_CLK_ROUND_RATE = 3,
+ CMD_CLK_GET_PARENT = 4,
+ CMD_CLK_SET_PARENT = 5,
+ CMD_CLK_IS_ENABLED = 6,
+ CMD_CLK_ENABLE = 7,
+ CMD_CLK_DISABLE = 8,
+ CMD_CLK_GET_ALL_INFO = 14,
+ CMD_CLK_GET_MAX_CLK_ID = 15,
+ CMD_CLK_MAX,
+};
+/** @} */
+
+#define MRQ_CLK_NAME_MAXLEN 40
+#define MRQ_CLK_MAX_PARENTS 16
+
+/** @private */
+struct cmd_clk_get_rate_request {
+ EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_get_rate_response {
+ int64_t rate;
+} __ABI_PACKED;
+
+struct cmd_clk_set_rate_request {
+ int32_t unused;
+ int64_t rate;
+} __ABI_PACKED;
+
+struct cmd_clk_set_rate_response {
+ int64_t rate;
+} __ABI_PACKED;
+
+struct cmd_clk_round_rate_request {
+ int32_t unused;
+ int64_t rate;
+} __ABI_PACKED;
+
+struct cmd_clk_round_rate_response {
+ int64_t rate;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_get_parent_request {
+ EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_get_parent_response {
+ uint32_t parent_id;
+} __ABI_PACKED;
+
+struct cmd_clk_set_parent_request {
+ uint32_t parent_id;
+} __ABI_PACKED;
+
+struct cmd_clk_set_parent_response {
+ uint32_t parent_id;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_is_enabled_request {
+ EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_is_enabled_response {
+ int32_t state;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_enable_request {
+ EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_enable_response {
+ EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_disable_request {
+ EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_disable_response {
+ EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_get_all_info_request {
+ EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_get_all_info_response {
+ uint32_t flags;
+ uint32_t parent;
+ uint32_t parents[MRQ_CLK_MAX_PARENTS];
+ uint8_t num_parents;
+ uint8_t name[MRQ_CLK_NAME_MAXLEN];
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_get_max_clk_id_request {
+ EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_get_max_clk_id_response {
+ uint32_t max_id;
+} __ABI_PACKED;
+/** @} */
+
+/**
+ * @ingroup Clocks
+ * @brief request with #MRQ_CLK
+ *
+ * Used by the sender of an #MRQ_CLK message to control clocks. The
+ * clk_request is split into several sub-commands. Some sub-commands
+ * require no additional data. Others have a sub-command specific
+ * payload
+ *
+ * |sub-command |payload |
+ * |----------------------------|-----------------------|
+ * |CMD_CLK_GET_RATE |- |
+ * |CMD_CLK_SET_RATE |clk_set_rate |
+ * |CMD_CLK_ROUND_RATE |clk_round_rate |
+ * |CMD_CLK_GET_PARENT |- |
+ * |CMD_CLK_SET_PARENT |clk_set_parent |
+ * |CMD_CLK_IS_ENABLED |- |
+ * |CMD_CLK_ENABLE |- |
+ * |CMD_CLK_DISABLE |- |
+ * |CMD_CLK_GET_ALL_INFO |- |
+ * |CMD_CLK_GET_MAX_CLK_ID |- |
+ *
+ */
+
+struct mrq_clk_request {
+ /** @brief sub-command and clock id concatenated to 32-bit word.
+ * - bits[31..24] is the sub-cmd.
+ * - bits[23..0] is the clock id
+ */
+ uint32_t cmd_and_id;
+
+ union {
+ /** @private */
+ struct cmd_clk_get_rate_request clk_get_rate;
+ struct cmd_clk_set_rate_request clk_set_rate;
+ struct cmd_clk_round_rate_request clk_round_rate;
+ /** @private */
+ struct cmd_clk_get_parent_request clk_get_parent;
+ struct cmd_clk_set_parent_request clk_set_parent;
+ /** @private */
+ struct cmd_clk_enable_request clk_enable;
+ /** @private */
+ struct cmd_clk_disable_request clk_disable;
+ /** @private */
+ struct cmd_clk_is_enabled_request clk_is_enabled;
+ /** @private */
+ struct cmd_clk_get_all_info_request clk_get_all_info;
+ /** @private */
+ struct cmd_clk_get_max_clk_id_request clk_get_max_clk_id;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Clocks
+ * @brief response to MRQ_CLK
+ *
+ * Each sub-command supported by @ref mrq_clk_request may return
+ * sub-command-specific data. Some do and some do not as indicated in
+ * the following table
+ *
+ * |sub-command |payload |
+ * |----------------------------|------------------------|
+ * |CMD_CLK_GET_RATE |clk_get_rate |
+ * |CMD_CLK_SET_RATE |clk_set_rate |
+ * |CMD_CLK_ROUND_RATE |clk_round_rate |
+ * |CMD_CLK_GET_PARENT |clk_get_parent |
+ * |CMD_CLK_SET_PARENT |clk_set_parent |
+ * |CMD_CLK_IS_ENABLED |clk_is_enabled |
+ * |CMD_CLK_ENABLE |- |
+ * |CMD_CLK_DISABLE |- |
+ * |CMD_CLK_GET_ALL_INFO |clk_get_all_info |
+ * |CMD_CLK_GET_MAX_CLK_ID |clk_get_max_id |
+ *
+ */
+
+struct mrq_clk_response {
+ union {
+ struct cmd_clk_get_rate_response clk_get_rate;
+ struct cmd_clk_set_rate_response clk_set_rate;
+ struct cmd_clk_round_rate_response clk_round_rate;
+ struct cmd_clk_get_parent_response clk_get_parent;
+ struct cmd_clk_set_parent_response clk_set_parent;
+ /** @private */
+ struct cmd_clk_enable_response clk_enable;
+ /** @private */
+ struct cmd_clk_disable_response clk_disable;
+ struct cmd_clk_is_enabled_response clk_is_enabled;
+ struct cmd_clk_get_all_info_response clk_get_all_info;
+ struct cmd_clk_get_max_clk_id_response clk_get_max_clk_id;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_QUERY_ABI
+ * @brief check if an MRQ is implemented
+ *
+ * * Platforms: All
+ * * Initiators: Any
+ * * Targets: Any
+ * * Request Payload: @ref mrq_query_abi_request
+ * * Response Payload: @ref mrq_query_abi_response
+ */
+
+/**
+ * @ingroup ABI_info
+ * @brief request with MRQ_QUERY_ABI
+ *
+ * Used by #MRQ_QUERY_ABI call to check if MRQ code #mrq is supported
+ * by the recipient.
+ */
+struct mrq_query_abi_request {
+ /** @brief MRQ code to query */
+ uint32_t mrq;
+} __ABI_PACKED;
+
+/**
+ * @ingroup ABI_info
+ * @brief response to MRQ_QUERY_ABI
+ */
+struct mrq_query_abi_response {
+ /** @brief 0 if queried MRQ is supported. Else, -#BPMP_ENODEV */
+ int32_t status;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_PG_READ_STATE
+ * @brief read the power-gating state of a partition
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_pg_read_state_request
+ * * Response Payload: @ref mrq_pg_read_state_response
+ * @addtogroup Powergating
+ * @{
+ */
+
+/**
+ * @brief request with #MRQ_PG_READ_STATE
+ *
+ * Used by MRQ_PG_READ_STATE call to read the current state of a
+ * partition.
+ */
+struct mrq_pg_read_state_request {
+ /** @brief ID of partition */
+ uint32_t partition_id;
+} __ABI_PACKED;
+
+/**
+ * @brief response to MRQ_PG_READ_STATE
+ * @todo define possible errors.
+ */
+struct mrq_pg_read_state_response {
+ /** @brief read as don't care */
+ uint32_t sram_state;
+ /** @brief state of power partition
+ * * 0 : off
+ * * 1 : on
+ */
+ uint32_t logic_state;
+} __ABI_PACKED;
+
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_PG_UPDATE_STATE
+ * @brief modify the power-gating state of a partition
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_pg_update_state_request
+ * * Response Payload: N/A
+ * @addtogroup Powergating
+ * @{
+ */
+
+/**
+ * @brief request with mrq_pg_update_state_request
+ *
+ * Used by #MRQ_PG_UPDATE_STATE call to request BPMP to change the
+ * state of a power partition #partition_id.
+ */
+struct mrq_pg_update_state_request {
+ /** @brief ID of partition */
+ uint32_t partition_id;
+ /** @brief secondary control of power partition
+ * @details Ignored by many versions of the BPMP
+ * firmware. For maximum compatibility, set the value
+ * according to @logic_state
+ * * 0x1: power ON partition (@ref logic_state == 0x3)
+ * * 0x3: power OFF partition (@ref logic_state == 0x1)
+ */
+ uint32_t sram_state;
+ /** @brief controls state of power partition, legal values are
+ * * 0x1 : power OFF partition
+ * * 0x3 : power ON partition
+ */
+ uint32_t logic_state;
+ /** @brief change state of clocks of the power partition, legal values
+ * * 0x0 : do not change clock state
+ * * 0x1 : disable partition clocks (only applicable when
+ * @ref logic_state == 0x1)
+ * * 0x3 : enable partition clocks (only applicable when
+ * @ref logic_state == 0x3)
+ */
+ uint32_t clock_state;
+} __ABI_PACKED;
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_THERMAL
+ * @brief interact with BPMP thermal framework
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: Any
+ * * Request Payload: TODO
+ * * Response Payload: TODO
+ *
+ * @addtogroup Thermal
+ *
+ * The BPMP firmware includes a thermal framework. Drivers within the
+ * bpmp firmware register with the framework to provide thermal
+ * zones. Each thermal zone corresponds to an entity whose temperature
+ * can be measured. The framework also has a notion of trip points. A
+ * trip point consists of a thermal zone id, a temperature, and a
+ * callback routine. The framework invokes the callback when the zone
+ * hits the indicated temperature. The BPMP firmware uses this thermal
+ * framework interally to implement various temperature-dependent
+ * functions.
+ *
+ * Software on the CPU can use #MRQ_THERMAL (with payload @ref
+ * mrq_thermal_host_to_bpmp_request) to interact with the BPMP thermal
+ * framework. The CPU must It can query the number of supported zones,
+ * query zone temperatures, and set trip points.
+ *
+ * When a trip point set by the CPU gets crossed, BPMP firmware issues
+ * an IPC to the CPU having mrq_request::mrq = #MRQ_THERMAL and a
+ * payload of @ref mrq_thermal_bpmp_to_host_request.
+ * @{
+ */
+enum mrq_thermal_host_to_bpmp_cmd {
+ /**
+ * @brief Check whether the BPMP driver supports the specified
+ * request type.
+ *
+ * Host needs to supply request parameters.
+ *
+ * mrq_response::err is 0 if the specified request is
+ * supported and -#BPMP_ENODEV otherwise.
+ */
+ CMD_THERMAL_QUERY_ABI = 0,
+
+ /**
+ * @brief Get the current temperature of the specified zone.
+ *
+ * Host needs to supply request parameters.
+ *
+ * mrq_response::err is
+ * * 0: Temperature query succeeded.
+ * * -#BPMP_EINVAL: Invalid request parameters.
+ * * -#BPMP_ENOENT: No driver registered for thermal zone..
+ * * -#BPMP_EFAULT: Problem reading temperature measurement.
+ */
+ CMD_THERMAL_GET_TEMP = 1,
+
+ /**
+ * @brief Enable or disable and set the lower and upper
+ * thermal limits for a thermal trip point. Each zone has
+ * one trip point.
+ *
+ * Host needs to supply request parameters. Once the
+ * temperature hits a trip point, the BPMP will send a message
+ * to the CPU having MRQ=MRQ_THERMAL and
+ * type=CMD_THERMAL_HOST_TRIP_REACHED
+ *
+ * mrq_response::err is
+ * * 0: Trip successfully set.
+ * * -#BPMP_EINVAL: Invalid request parameters.
+ * * -#BPMP_ENOENT: No driver registered for thermal zone.
+ * * -#BPMP_EFAULT: Problem setting trip point.
+ */
+ CMD_THERMAL_SET_TRIP = 2,
+
+ /**
+ * @brief Get the number of supported thermal zones.
+ *
+ * No request parameters required.
+ *
+ * mrq_response::err is always 0, indicating success.
+ */
+ CMD_THERMAL_GET_NUM_ZONES = 3,
+
+ /** @brief: number of supported host-to-bpmp commands. May
+ * increase in future
+ */
+ CMD_THERMAL_HOST_TO_BPMP_NUM
+};
+
+enum mrq_thermal_bpmp_to_host_cmd {
+ /**
+ * @brief Indication that the temperature for a zone has
+ * exceeded the range indicated in the thermal trip point
+ * for the zone.
+ *
+ * BPMP needs to supply request parameters. Host only needs to
+ * acknowledge.
+ */
+ CMD_THERMAL_HOST_TRIP_REACHED = 100,
+
+ /** @brief: number of supported bpmp-to-host commands. May
+ * increase in future
+ */
+ CMD_THERMAL_BPMP_TO_HOST_NUM
+};
+
+/*
+ * Host->BPMP request data for request type CMD_THERMAL_QUERY_ABI
+ *
+ * zone: Request type for which to check existence.
+ */
+struct cmd_thermal_query_abi_request {
+ uint32_t type;
+} __ABI_PACKED;
+
+/*
+ * Host->BPMP request data for request type CMD_THERMAL_GET_TEMP
+ *
+ * zone: Number of thermal zone.
+ */
+struct cmd_thermal_get_temp_request {
+ uint32_t zone;
+} __ABI_PACKED;
+
+/*
+ * BPMP->Host reply data for request CMD_THERMAL_GET_TEMP
+ *
+ * error: 0 if request succeeded.
+ * -BPMP_EINVAL if request parameters were invalid.
+ * -BPMP_ENOENT if no driver was registered for the specified thermal zone.
+ * -BPMP_EFAULT for other thermal zone driver errors.
+ * temp: Current temperature in millicelsius.
+ */
+struct cmd_thermal_get_temp_response {
+ int32_t temp;
+} __ABI_PACKED;
+
+/*
+ * Host->BPMP request data for request type CMD_THERMAL_SET_TRIP
+ *
+ * zone: Number of thermal zone.
+ * low: Temperature of lower trip point in millicelsius
+ * high: Temperature of upper trip point in millicelsius
+ * enabled: 1 to enable trip point, 0 to disable trip point
+ */
+struct cmd_thermal_set_trip_request {
+ uint32_t zone;
+ int32_t low;
+ int32_t high;
+ uint32_t enabled;
+} __ABI_PACKED;
+
+/*
+ * BPMP->Host request data for request type CMD_THERMAL_HOST_TRIP_REACHED
+ *
+ * zone: Number of thermal zone where trip point was reached.
+ */
+struct cmd_thermal_host_trip_reached_request {
+ uint32_t zone;
+} __ABI_PACKED;
+
+/*
+ * BPMP->Host reply data for request type CMD_THERMAL_GET_NUM_ZONES
+ *
+ * num: Number of supported thermal zones. The thermal zones are indexed
+ * starting from zero.
+ */
+struct cmd_thermal_get_num_zones_response {
+ uint32_t num;
+} __ABI_PACKED;
+
+/*
+ * Host->BPMP request data.
+ *
+ * Reply type is union mrq_thermal_bpmp_to_host_response.
+ *
+ * type: Type of request. Values listed in enum mrq_thermal_type.
+ * data: Request type specific parameters.
+ */
+struct mrq_thermal_host_to_bpmp_request {
+ uint32_t type;
+ union {
+ struct cmd_thermal_query_abi_request query_abi;
+ struct cmd_thermal_get_temp_request get_temp;
+ struct cmd_thermal_set_trip_request set_trip;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/*
+ * BPMP->Host request data.
+ *
+ * type: Type of request. Values listed in enum mrq_thermal_type.
+ * data: Request type specific parameters.
+ */
+struct mrq_thermal_bpmp_to_host_request {
+ uint32_t type;
+ union {
+ struct cmd_thermal_host_trip_reached_request host_trip_reached;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/*
+ * Data in reply to a Host->BPMP request.
+ */
+union mrq_thermal_bpmp_to_host_response {
+ struct cmd_thermal_get_temp_response get_temp;
+ struct cmd_thermal_get_num_zones_response get_num_zones;
+} __ABI_PACKED;
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_CPU_VHINT
+ * @brief Query CPU voltage hint data
+ *
+ * * Platforms: T186
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_cpu_vhint_request
+ * * Response Payload: N/A
+ *
+ * @addtogroup Vhint CPU Voltage hint
+ * @{
+ */
+
+/**
+ * @brief request with #MRQ_CPU_VHINT
+ *
+ * Used by #MRQ_CPU_VHINT call by CCPLEX to retrieve voltage hint data
+ * from BPMP to memory space pointed by #addr. CCPLEX is responsible
+ * to allocate sizeof(cpu_vhint_data) sized block of memory and
+ * appropriately map it for BPMP before sending the request.
+ */
+struct mrq_cpu_vhint_request {
+ /** @brief IOVA address for the #cpu_vhint_data */
+ uint32_t addr; /* struct cpu_vhint_data * */
+ /** @brief ID of the cluster whose data is requested */
+ uint32_t cluster_id; /* enum cluster_id */
+} __ABI_PACKED;
+
+/**
+ * @brief description of the CPU v/f relation
+ *
+ * Used by #MRQ_CPU_VHINT call to carry data pointed by #addr of
+ * struct mrq_cpu_vhint_request
+ */
+struct cpu_vhint_data {
+ uint32_t ref_clk_hz; /**< reference frequency in Hz */
+ uint16_t pdiv; /**< post divider value */
+ uint16_t mdiv; /**< input divider value */
+ uint16_t ndiv_max; /**< fMAX expressed with max NDIV value */
+ /** table of ndiv values as a function of vINDEX (voltage index) */
+ uint16_t ndiv[80];
+ /** minimum allowed NDIV value */
+ uint16_t ndiv_min;
+ /** minimum allowed voltage hint value (as in vINDEX) */
+ uint16_t vfloor;
+ /** maximum allowed voltage hint value (as in vINDEX) */
+ uint16_t vceil;
+ /** post-multiplier for vindex value */
+ uint16_t vindex_mult;
+ /** post-divider for vindex value */
+ uint16_t vindex_div;
+ /** reserved for future use */
+ uint16_t reserved[328];
+} __ABI_PACKED;
+
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_ABI_RATCHET
+ * @brief ABI ratchet value query
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_abi_ratchet_request
+ * * Response Payload: @ref mrq_abi_ratchet_response
+ * @addtogroup ABI_info
+ * @{
+ */
+
+/**
+ * @brief an ABI compatibility mechanism
+ *
+ * BPMP_ABI_RATCHET_VALUE may increase for various reasons in a future
+ * revision of this header file.
+ * 1. That future revision deprecates some MRQ
+ * 2. That future revision introduces a breaking change to an existing
+ * MRQ or
+ * 3. A bug is discovered in an existing implementation of the BPMP-FW
+ * (or possibly one of its clients) which warrants deprecating that
+ * implementation.
+ */
+#define BPMP_ABI_RATCHET_VALUE 3
+
+/**
+ * @brief request with #MRQ_ABI_RATCHET.
+ *
+ * #ratchet should be #BPMP_ABI_RATCHET_VALUE from the ABI header
+ * against which the requester was compiled.
+ *
+ * If ratchet is less than BPMP's #BPMP_ABI_RATCHET_VALUE, BPMP may
+ * reply with mrq_response::err = -#BPMP_ERANGE to indicate that
+ * BPMP-FW cannot interoperate correctly with the requester. Requester
+ * should cease further communication with BPMP.
+ *
+ * Otherwise, err shall be 0.
+ */
+struct mrq_abi_ratchet_request {
+ /** @brief requester's ratchet value */
+ uint16_t ratchet;
+};
+
+/**
+ * @brief response to #MRQ_ABI_RATCHET
+ *
+ * #ratchet shall be #BPMP_ABI_RATCHET_VALUE from the ABI header
+ * against which BPMP firwmare was compiled.
+ *
+ * If #ratchet is less than the requester's #BPMP_ABI_RATCHET_VALUE,
+ * the requster must either interoperate with BPMP according to an ABI
+ * header version with BPMP_ABI_RATCHET_VALUE = ratchet or cease
+ * communication with BPMP.
+ *
+ * If mrq_response::err is 0 and ratchet is greater than or equal to the
+ * requester's BPMP_ABI_RATCHET_VALUE, the requester should continue
+ * normal operation.
+ */
+struct mrq_abi_ratchet_response {
+ /** @brief BPMP's ratchet value */
+ uint16_t ratchet;
+};
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_EMC_DVFS_LATENCY
+ * @brief query frequency dependent EMC DVFS latency
+ *
+ * * Platforms: T186
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: N/A
+ * * Response Payload: @ref mrq_emc_dvfs_latency_response
+ * @addtogroup EMC
+ * @{
+ */
+
+/**
+ * @brief used by @ref mrq_emc_dvfs_latency_response
+ */
+struct emc_dvfs_latency {
+ /** @brief EMC frequency in kHz */
+ uint32_t freq;
+ /** @brief EMC DVFS latency in nanoseconds */
+ uint32_t latency;
+} __ABI_PACKED;
+
+#define EMC_DVFS_LATENCY_MAX_SIZE 14
+/**
+ * @brief response to #MRQ_EMC_DVFS_LATENCY
+ */
+struct mrq_emc_dvfs_latency_response {
+ /** @brief the number valid entries in #pairs */
+ uint32_t num_pairs;
+ /** @brief EMC <frequency, latency> information */
+ struct emc_dvfs_latency pairs[EMC_DVFS_LATENCY_MAX_SIZE];
+} __ABI_PACKED;
+
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_TRACE_ITER
+ * @brief manage the trace iterator
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: N/A
+ * * Response Payload: @ref mrq_trace_iter_request
+ * @addtogroup Trace
+ * @{
+ */
+enum {
+ /** @brief (re)start the tracing now. Ignore older events */
+ TRACE_ITER_INIT = 0,
+ /** @brief clobber all events in the trace buffer */
+ TRACE_ITER_CLEAN = 1
+};
+
+/**
+ * @brief request with #MRQ_TRACE_ITER
+ */
+struct mrq_trace_iter_request {
+ /** @brief TRACE_ITER_INIT or TRACE_ITER_CLEAN */
+ uint32_t cmd;
+} __ABI_PACKED;
+
+/** @} */
+
+/*
+ * 4. Enumerations
+ */
+
+/*
+ * 4.1 CPU enumerations
+ *
+ * See <mach-t186/system-t186.h>
+ *
+ * 4.2 CPU Cluster enumerations
+ *
+ * See <mach-t186/system-t186.h>
+ *
+ * 4.3 System low power state enumerations
+ *
+ * See <mach-t186/system-t186.h>
+ */
+
+/*
+ * 4.4 Clock enumerations
+ *
+ * For clock enumerations, see <mach-t186/clk-t186.h>
+ */
+
+/*
+ * 4.5 Reset enumerations
+ *
+ * For reset enumerations, see <mach-t186/reset-t186.h>
+ */
+
+/*
+ * 4.6 Thermal sensor enumerations
+ *
+ * For thermal sensor enumerations, see <mach-t186/thermal-t186.h>
+ */
+
+/**
+ * @defgroup Error_Codes
+ * Negative values for mrq_response::err generally indicate some
+ * error. The ABI defines the following error codes. Negating these
+ * defines is an exercise left to the user.
+ * @{
+ */
+/** @brief No such file or directory */
+#define BPMP_ENOENT 2
+/** @brief No MRQ handler */
+#define BPMP_ENOHANDLER 3
+/** @brief I/O error */
+#define BPMP_EIO 5
+/** @brief Bad sub-MRQ command */
+#define BPMP_EBADCMD 6
+/** @brief Not enough memory */
+#define BPMP_ENOMEM 12
+/** @brief Permission denied */
+#define BPMP_EACCES 13
+/** @brief Bad address */
+#define BPMP_EFAULT 14
+/** @brief No such device */
+#define BPMP_ENODEV 19
+/** @brief Argument is a directory */
+#define BPMP_EISDIR 21
+/** @brief Invalid argument */
+#define BPMP_EINVAL 22
+/** @brief Timeout during operation */
+#define BPMP_ETIMEDOUT 23
+/** @brief Out of range */
+#define BPMP_ERANGE 34
+/** @} */
+/** @} */
+#endif
--
2.9.0
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH 06/10] soc/tegra: Add Tegra186 support
2016-06-27 9:02 [PATCH 00/10] arm64: tegra: add BPMP support Joseph Lo
` (4 preceding siblings ...)
2016-06-27 9:02 ` [PATCH 05/10] firmware: tegra: add BPMP support Joseph Lo
@ 2016-06-27 9:02 ` Joseph Lo
[not found] ` <20160627090248.23621-1-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-06-27 9:02 ` [PATCH 09/10] arm64: dts: tegra: Add NVIDIA Tegra186 P3310 main " Joseph Lo
7 siblings, 0 replies; 21+ messages in thread
From: Joseph Lo @ 2016-06-27 9:02 UTC (permalink / raw)
To: Stephen Warren, Thierry Reding, Alexandre Courbot
Cc: Mark Rutland, devicetree, Catalin Marinas, Peter De Schrijver,
Jassi Brar, Will Deacon, linux-kernel, Rob Herring,
linux-arm-kernel, Joseph Lo, linux-tegra, Matthew Longnecker
The Tegra186 has a combination of Denver and Cortex-A57 CPU cores and
GPUs with Pascal architecture on it. It features with ADSP with
Cortex-A9 CPU for audio processing, hardware video encoder/decoder with
multi-format support, ISP for image capture processing and BPMP for the
power managements.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
---
drivers/soc/tegra/Kconfig | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/soc/tegra/Kconfig b/drivers/soc/tegra/Kconfig
index 03089ad2fc65..88a71dfd466c 100644
--- a/drivers/soc/tegra/Kconfig
+++ b/drivers/soc/tegra/Kconfig
@@ -61,6 +61,20 @@ config ARCH_TEGRA_132_SOC
but contains an NVIDIA Denver CPU complex in place of
Tegra124's "4+1" Cortex-A15 CPU complex.
+config ARCH_TEGRA_186_SOC
+ bool "NVIDIA Tegra186 SoC"
+ select MAILBOX
+ select TEGRA_BPMP
+ select TEGRA_HSP_MBOX
+ select TEGRA_IVC
+ help
+ Enable support for the NVIDIA Tegar186 SoC. The Tegra186 has a
+ combination of Denver and Cortex-A57 CPU cores and GPUs with Pascal
+ architecture on it. It features with ADSP with Cortex-A9 CPU for
+ audio processing, hardware video encoder/decoder with multi-format
+ support, ISP for image capture processing and BPMP for the power
+ managements.
+
config ARCH_TEGRA_210_SOC
bool "NVIDIA Tegra210 SoC"
select PINCTRL_TEGRA210
--
2.9.0
^ permalink raw reply related [flat|nested] 21+ messages in thread[parent not found: <20160627090248.23621-1-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]
* [PATCH 07/10] arm64: defconfig: Enable Tegra186 SoC
[not found] ` <20160627090248.23621-1-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
@ 2016-06-27 9:02 ` Joseph Lo
2016-06-27 9:02 ` [PATCH 08/10] arm64: dts: tegra: Add Tegra186 support Joseph Lo
2016-06-27 9:02 ` [PATCH 10/10] arm64: dts: tegra: Add NVIDIA P2771 board support Joseph Lo
2 siblings, 0 replies; 21+ messages in thread
From: Joseph Lo @ 2016-06-27 9:02 UTC (permalink / raw)
To: Stephen Warren, Thierry Reding, Alexandre Courbot
Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Rob Herring,
Mark Rutland, Peter De Schrijver, Matthew Longnecker,
devicetree-u79uwXL29TY76Z2rM5mHXA, Jassi Brar,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Catalin Marinas,
Will Deacon, Joseph Lo
Enable Tegra186 SoC.
Signed-off-by: Joseph Lo <josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index f267eea101a7..033d9cb1e983 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -312,6 +312,7 @@ CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD=y
CONFIG_QCOM_SMD_RPM=y
CONFIG_ARCH_TEGRA_132_SOC=y
+CONFIG_ARCH_TEGRA_186_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_PWM=y
--
2.9.0
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH 08/10] arm64: dts: tegra: Add Tegra186 support
[not found] ` <20160627090248.23621-1-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-06-27 9:02 ` [PATCH 07/10] arm64: defconfig: Enable Tegra186 SoC Joseph Lo
@ 2016-06-27 9:02 ` Joseph Lo
2016-06-27 9:02 ` [PATCH 10/10] arm64: dts: tegra: Add NVIDIA P2771 board support Joseph Lo
2 siblings, 0 replies; 21+ messages in thread
From: Joseph Lo @ 2016-06-27 9:02 UTC (permalink / raw)
To: Stephen Warren, Thierry Reding, Alexandre Courbot
Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Rob Herring,
Mark Rutland, Peter De Schrijver, Matthew Longnecker,
devicetree-u79uwXL29TY76Z2rM5mHXA, Jassi Brar,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Catalin Marinas,
Will Deacon, Joseph Lo
This adds the initial support of Tegra186 SoC, which can help to bring
up the debug console and initrd for further developing.
Signed-off-by: Joseph Lo <josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 77 ++++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra186.dtsi
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
new file mode 100644
index 000000000000..bed30f30bb0b
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -0,0 +1,77 @@
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra-hsp.h>
+
+/ {
+ compatible = "nvidia,tegra186";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ uarta: serial@03100000 {
+ compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+ reg = <0x0 0x03100000 0x0 0x40>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@03881000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x03881000 0x0 0x1000>,
+ <0x0 0x03882000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-parent = <&gic>;
+ };
+
+ hsp_top: hsp@03c00000 {
+ compatible = "nvidia,tegra186-hsp";
+ reg = <0x0 0x03c00000 0x0 0xa0000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "doorbell";
+ nvidia,hsp-function = <HSP_DOORBELL>;
+ #mbox-cells = <1>;
+ };
+
+ bpmp@d0000000 {
+ compatible = "nvidia,tegra186-bpmp";
+ mboxes = <&hsp_top HSP_DB_MASTER_BPMP>;
+ shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ status = "disabled";
+ };
+
+ sysram@30000000 {
+ compatible = "nvidia,tegra186-sysram", "mmio-ram";
+ reg = <0x0 0x30000000 0x0 0x4ffff>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0x0 0x0 0x30000000 0x0 0x4ffff>;
+
+ cpu_bpmp_tx: bpmp_shmem@4e000 {
+ compatible = "nvidia,tegra186-bpmp-shmem";
+ reg = <0x0 0x4e000 0x0 0x1000>;
+ };
+
+ cpu_bpmp_rx: bpmp_shmem@4f000 {
+ compatible = "nvidia,tegra186-bpmp-shmem";
+ reg = <0x0 0x4f000 0x0 0x1000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
+ };
+};
--
2.9.0
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH 10/10] arm64: dts: tegra: Add NVIDIA P2771 board support
[not found] ` <20160627090248.23621-1-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2016-06-27 9:02 ` [PATCH 07/10] arm64: defconfig: Enable Tegra186 SoC Joseph Lo
2016-06-27 9:02 ` [PATCH 08/10] arm64: dts: tegra: Add Tegra186 support Joseph Lo
@ 2016-06-27 9:02 ` Joseph Lo
2 siblings, 0 replies; 21+ messages in thread
From: Joseph Lo @ 2016-06-27 9:02 UTC (permalink / raw)
To: Stephen Warren, Thierry Reding, Alexandre Courbot
Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Rob Herring,
Mark Rutland, Peter De Schrijver, Matthew Longnecker,
devicetree-u79uwXL29TY76Z2rM5mHXA, Jassi Brar,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Catalin Marinas,
Will Deacon, Joseph Lo
Add NVIDIA Tegra186 P2771 board support, which is a reference
development board with P2597 I/O board and P3310 chip module on it.
Signed-off-by: Joseph Lo <josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm64/boot/dts/nvidia/Makefile | 1 +
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 8 ++++++++
2 files changed, 9 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index 0f7cdf3e05c1..67234f3dc795 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -1,4 +1,5 @@
dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
+dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
new file mode 100644
index 000000000000..66b936389fa7
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "tegra186-p3310.dtsi"
+
+/ {
+ model = "NVIDIA Tegra186 P2771-0000 Board";
+ compatible = "nvidia,p2771-0000", "nvidia,tegra186";
+};
--
2.9.0
^ permalink raw reply related [flat|nested] 21+ messages in thread
* [PATCH 09/10] arm64: dts: tegra: Add NVIDIA Tegra186 P3310 main board support
2016-06-27 9:02 [PATCH 00/10] arm64: tegra: add BPMP support Joseph Lo
` (6 preceding siblings ...)
[not found] ` <20160627090248.23621-1-josephl-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
@ 2016-06-27 9:02 ` Joseph Lo
7 siblings, 0 replies; 21+ messages in thread
From: Joseph Lo @ 2016-06-27 9:02 UTC (permalink / raw)
To: Stephen Warren, Thierry Reding, Alexandre Courbot
Cc: linux-tegra, linux-arm-kernel, Rob Herring, Mark Rutland,
Peter De Schrijver, Matthew Longnecker, devicetree, Jassi Brar,
linux-kernel, Catalin Marinas, Will Deacon, Joseph Lo
Add NVIDIA Tegra186 P3310 main board support, which is a chip module
with DRAM, nonvolatile storage, WiFi, ethernet and PMIC chips on it. It
also needs an IO board and hooks on it to represent as an application
platform.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 30 ++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
new file mode 100644
index 000000000000..5258ec0d6eef
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -0,0 +1,30 @@
+#include "tegra186.dtsi"
+
+/ {
+ model = "NVIDIA Tegra186 P3310 main Board";
+ compatible = "nvidia,p3301", "nvidia,tegra186";
+
+ aliases {
+ serial0 = &uarta;
+ };
+
+ chosen {
+ bootargs = "earlycon console=ttyS0,115200n8";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x2 0x00000000>;
+ };
+
+ serial@03100000 {
+ // HACK: before clk driver ready
+ clock-frequency = <408000000>;
+ status = "okay";
+ };
+
+ bpmp@d0000000 {
+ status = "okay";
+ };
+};
--
2.9.0
^ permalink raw reply related [flat|nested] 21+ messages in thread