* [PATCH 1/5] dt: bindings: lp8860: Update DT label binding
[not found] ` <20171204212026.14214-1-dmurphy-l0cyMroinI0@public.gmane.org>
@ 2017-12-04 21:20 ` Dan Murphy
2017-12-04 21:20 ` [PATCH 3/5] dt: bindings: lp8860: Add trigger binding to the lp8860 Dan Murphy
1 sibling, 0 replies; 2+ messages in thread
From: Dan Murphy @ 2017-12-04 21:20 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
rpurdie-Fm38FmjxZ/leoWH0uzbU5w,
jacek.anaszewski-Re5JQEeQqe8AvxtiuMwx3w, pavel-+ZI9xUNit7I
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-leds-u79uwXL29TY76Z2rM5mHXA, Dan Murphy,
devicetree-u79uwXL29TY76Z2rM5mHXA
Update the lp8860 label binding to the LED
standard as documented in
Documentation/devicetree/bindings/leds/common.txt
Signed-off-by: Dan Murphy <dmurphy-l0cyMroinI0@public.gmane.org>
cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
Documentation/devicetree/bindings/leds/leds-lp8860.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
index aad38dd94d4b..e3a5e91f965b 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -9,9 +9,9 @@ Required properties:
- compatible:
"ti,lp8860"
- reg - I2C slave address
- - label - Used for naming LEDs
Optional properties:
+ - label : see Documentation/devicetree/bindings/leds/common.txt
- enable-gpio - gpio pin to enable/disable the device.
- supply - "vled" - LED supply
@@ -20,9 +20,12 @@ Example:
leds: leds@6 {
compatible = "ti,lp8860";
reg = <0x2d>;
- label = "display_cluster";
enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
vled-supply = <&vbatt>;
+
+ display_cluster: display_cluster@0 {
+ label = "display_cluster";
+ };
}
For more product information please see the link below:
--
2.15.0.124.g7668cbc60
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 3/5] dt: bindings: lp8860: Add trigger binding to the lp8860
[not found] ` <20171204212026.14214-1-dmurphy-l0cyMroinI0@public.gmane.org>
2017-12-04 21:20 ` [PATCH 1/5] dt: bindings: lp8860: Update DT label binding Dan Murphy
@ 2017-12-04 21:20 ` Dan Murphy
1 sibling, 0 replies; 2+ messages in thread
From: Dan Murphy @ 2017-12-04 21:20 UTC (permalink / raw)
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A, mark.rutland-5wv7dgnIgG8,
rpurdie-Fm38FmjxZ/leoWH0uzbU5w,
jacek.anaszewski-Re5JQEeQqe8AvxtiuMwx3w, pavel-+ZI9xUNit7I
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-leds-u79uwXL29TY76Z2rM5mHXA, Dan Murphy,
devicetree-u79uwXL29TY76Z2rM5mHXA
Add a default trigger optional node to the child node.
This will allow the driver to set the trigger for a backlight.
Signed-off-by: Dan Murphy <dmurphy-l0cyMroinI0@public.gmane.org>
cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
Documentation/devicetree/bindings/leds/leds-lp8860.txt | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
index e3a5e91f965b..40543e62da48 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -6,25 +6,28 @@ current sinks that can be controlled by a PWM input
signal, a SPI/I2C master, or both.
Required properties:
- - compatible:
+ - compatible :
"ti,lp8860"
- - reg - I2C slave address
+ - reg : I2C slave address
Optional properties:
- label : see Documentation/devicetree/bindings/leds/common.txt
- - enable-gpio - gpio pin to enable/disable the device.
- - supply - "vled" - LED supply
+ - enable-gpios : gpio pin to enable/disable the device.
+ - supply : "vled" - LED supply
+ - linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
Example:
leds: leds@6 {
compatible = "ti,lp8860";
reg = <0x2d>;
- enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
vled-supply = <&vbatt>;
display_cluster: display_cluster@0 {
label = "display_cluster";
+ linux,default-trigger = "backlight";
};
}
--
2.15.0.124.g7668cbc60
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-12-04 21:20 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20171204212026.14214-1-dmurphy@ti.com>
[not found] ` <20171204212026.14214-1-dmurphy-l0cyMroinI0@public.gmane.org>
2017-12-04 21:20 ` [PATCH 1/5] dt: bindings: lp8860: Update DT label binding Dan Murphy
2017-12-04 21:20 ` [PATCH 3/5] dt: bindings: lp8860: Add trigger binding to the lp8860 Dan Murphy
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).