[PATCH] Add support for bq27521 battery monitor

[PATCH] Add support for bq27521 battery monitor

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 4915 bytes --]


This adds basic support for BQ27521 battery monitor, used in Nokia N9
and N950. In particular, battery voltage is important to be able to
tell when the battery is almost empty. Emptying battery on N950 is
pretty painful, as flasher needs to be used to recover phone in such case.

Signed-off-by: Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>

diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
index 6858e1a..615c1cb 100644
--- a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt
@@ -15,6 +15,7 @@ Required properties:
  * "ti,bq27520g2" - BQ27520-g2
  * "ti,bq27520g3" - BQ27520-g3
  * "ti,bq27520g4" - BQ27520-g4
+ * "ti,bq27521" - BQ27521
  * "ti,bq27530" - BQ27530
  * "ti,bq27531" - BQ27531
  * "ti,bq27541" - BQ27541
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index ed44439..ee2851a 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -381,6 +381,30 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
 		BQ27XXX_DM_REG_ROWS,
 	},
+	[BQ27521] = {				/* FIXME */
+		[BQ27XXX_REG_CTRL] = 0x02,
+		[BQ27XXX_REG_TEMP] = 0x0a,
+		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_VOLT] = 0x0c,
+		[BQ27XXX_REG_AI] = 0x0e,
+		[BQ27XXX_REG_FLAGS] = 0x08,
+		[BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
+	},
 	[BQ27530] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
@@ -700,6 +724,15 @@ static enum power_supply_property bq27520g4_battery_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
+static enum power_supply_property bq27521_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+};
+
 static enum power_supply_property bq27530_battery_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
@@ -792,6 +825,7 @@ static struct {
 	BQ27XXX_PROP(BQ27520G2, bq27520g2_battery_props),
 	BQ27XXX_PROP(BQ27520G3, bq27520g3_battery_props),
 	BQ27XXX_PROP(BQ27520G4, bq27520g4_battery_props),
+	BQ27XXX_PROP(BQ27521, bq27521_battery_props),
 	BQ27XXX_PROP(BQ27530, bq27530_battery_props),
 	BQ27XXX_PROP(BQ27541, bq27541_battery_props),
 	BQ27XXX_PROP(BQ27545, bq27545_battery_props),
@@ -1529,6 +1563,7 @@ static bool bq27xxx_battery_overtemp(struct bq27xxx_device_info *di, u16 flags)
 	case BQ27520G2:
 	case BQ27520G3:
 	case BQ27520G4:
+	case BQ27521:
 	case BQ27541:
 	case BQ27545:
 		return flags & (BQ27XXX_FLAG_OTC | BQ27XXX_FLAG_OTD);
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index a597221..fd9b989 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -239,6 +239,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27520g2", BQ27520G2 },
 	{ "bq27520g3", BQ27520G3 },
 	{ "bq27520g4", BQ27520G4 },
+	{ "bq27521", BQ27521 },
 	{ "bq27530", BQ27530 },
 	{ "bq27531", BQ27530 },
 	{ "bq27541", BQ27541 },
@@ -269,6 +270,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
 	{ .compatible = "ti,bq27520g2" },
 	{ .compatible = "ti,bq27520g3" },
 	{ .compatible = "ti,bq27520g4" },
+	{ .compatible = "ti,bq27521" },
 	{ .compatible = "ti,bq27530" },
 	{ .compatible = "ti,bq27531" },
 	{ .compatible = "ti,bq27541" },
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index 11e1168..1e80931 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -14,6 +14,7 @@ enum bq27xxx_chip {
 	BQ27520G2, /* bq27520G2 */
 	BQ27520G3, /* bq27520G3 */
 	BQ27520G4, /* bq27520G4 */
+	BQ27521, /* bq27521 */	
 	BQ27530, /* bq27530, bq27531 */
 	BQ27541, /* bq27541, bq27542, bq27546, bq27742 */
 	BQ27545, /* bq27545 */

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH] Add support for bq27521 battery monitor

[Pali Rohár]

On Thursday 09 November 2017 22:06:15 Pavel Machek wrote:
> diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
> index ed44439..ee2851a 100644
> --- a/drivers/power/supply/bq27xxx_battery.c
> +++ b/drivers/power/supply/bq27xxx_battery.c
> @@ -381,6 +381,30 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
>  		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
>  		BQ27XXX_DM_REG_ROWS,
>  	},
> +	[BQ27521] = {				/* FIXME */
> +		[BQ27XXX_REG_CTRL] = 0x02,
> +		[BQ27XXX_REG_TEMP] = 0x0a,
> +		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_VOLT] = 0x0c,
> +		[BQ27XXX_REG_AI] = 0x0e,
> +		[BQ27XXX_REG_FLAGS] = 0x08,
> +		[BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
> +	},
>  	[BQ27530] = {
>  		[BQ27XXX_REG_CTRL] = 0x00,
>  		[BQ27XXX_REG_TEMP] = 0x06,

Hi! IIRC those registers are valid only for sn27521 chip in revision 14
(or new). For older revision is used different register map. And
detection of chip revision is somehow possible via some registers.

-- 
Pali Rohár
pali.rohar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] Add support for bq27521 battery monitor

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 2771 bytes --]

On Thu 2017-11-09 22:29:45, Pali Rohár wrote:
> On Thursday 09 November 2017 22:06:15 Pavel Machek wrote:
> > diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
> > index ed44439..ee2851a 100644
> > --- a/drivers/power/supply/bq27xxx_battery.c
> > +++ b/drivers/power/supply/bq27xxx_battery.c
> > @@ -381,6 +381,30 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
> >  		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
> >  		BQ27XXX_DM_REG_ROWS,
> >  	},
> > +	[BQ27521] = {				/* FIXME */
> > +		[BQ27XXX_REG_CTRL] = 0x02,
> > +		[BQ27XXX_REG_TEMP] = 0x0a,
> > +		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
> > +		[BQ27XXX_REG_VOLT] = 0x0c,
> > +		[BQ27XXX_REG_AI] = 0x0e,
> > +		[BQ27XXX_REG_FLAGS] = 0x08,
> > +		[BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
> > +		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
> > +		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
> > +		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
> > +		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
> > +		[BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
> > +		[BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
> > +		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
> > +		[BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
> > +		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
> > +		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
> > +		[BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
> > +		[BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
> > +		[BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
> > +		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
> > +		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
> > +	},
> >  	[BQ27530] = {
> >  		[BQ27XXX_REG_CTRL] = 0x00,
> >  		[BQ27XXX_REG_TEMP] = 0x06,
> 
> Hi! IIRC those registers are valid only for sn27521 chip in revision 14
> (or new). For older revision is used different register map. And
> detection of chip revision is somehow possible via some registers.

Yes, I know.. I even had this, but as I can't test it, and early N950
samples should be very very rare, I'd prefer the patch as is.

@@ -1905,6 +1940,23 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
 
 	dev_info(di->dev, "support ver. %s enabled\n", DRIVER_VERSION);
 
+	if (di->chip == BQ27521) {
+		int val;
+		val = di->bus.read(di, 0x32, false);
+		if (val == 0x2100) {
+			printk("rev. 13 chip detected; add support\n");
+			/* https://elinux.org/N950 has details */
+			return PTR_ERR(ENODEV);
+		}
+
+		val = di->bus.read(di, 0x34, false);
+		if ((val & 0xff00) != 0x2100) {
+			printk("rev. 14 chip not detected?!\n");
+			return PTR_ERR(EINVAL);
+		}
+		printk("verified chip rev. 14\n");
+	}
+
 	bq27xxx_battery_settings(di);
 	bq27xxx_battery_update(di);
 

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH] Add support for bq27521 battery monitor

[Pali Rohár]

On Thursday 09 November 2017 22:45:40 Pavel Machek wrote:
> On Thu 2017-11-09 22:29:45, Pali Rohár wrote:
> > On Thursday 09 November 2017 22:06:15 Pavel Machek wrote:
> > > diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
> > > index ed44439..ee2851a 100644
> > > --- a/drivers/power/supply/bq27xxx_battery.c
> > > +++ b/drivers/power/supply/bq27xxx_battery.c
> > > @@ -381,6 +381,30 @@ static u8 bq27xxx_regs[][BQ27XXX_REG_MAX] = {
> > >  		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
> > >  		BQ27XXX_DM_REG_ROWS,
> > >  	},
> > > +	[BQ27521] = {				/* FIXME */
> > > +		[BQ27XXX_REG_CTRL] = 0x02,
> > > +		[BQ27XXX_REG_TEMP] = 0x0a,
> > > +		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_REG_VOLT] = 0x0c,
> > > +		[BQ27XXX_REG_AI] = 0x0e,
> > > +		[BQ27XXX_REG_FLAGS] = 0x08,
> > > +		[BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
> > > +		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
> > > +	},
> > >  	[BQ27530] = {
> > >  		[BQ27XXX_REG_CTRL] = 0x00,
> > >  		[BQ27XXX_REG_TEMP] = 0x06,
> > 
> > Hi! IIRC those registers are valid only for sn27521 chip in revision 14
> > (or new). For older revision is used different register map. And
> > detection of chip revision is somehow possible via some registers.
> 
> Yes, I know.. I even had this, but as I can't test it, and early N950
> samples should be very very rare, I'd prefer the patch as is.
> 
> @@ -1905,6 +1940,23 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
>  
>  	dev_info(di->dev, "support ver. %s enabled\n", DRIVER_VERSION);
>  
> +	if (di->chip == BQ27521) {
> +		int val;
> +		val = di->bus.read(di, 0x32, false);
> +		if (val == 0x2100) {
> +			printk("rev. 13 chip detected; add support\n");
> +			/* https://elinux.org/N950 has details */
> +			return PTR_ERR(ENODEV);
> +		}
> +
> +		val = di->bus.read(di, 0x34, false);
> +		if ((val & 0xff00) != 0x2100) {
> +			printk("rev. 14 chip not detected?!\n");
> +			return PTR_ERR(EINVAL);
> +		}
> +		printk("verified chip rev. 14\n");
> +	}
> +
>  	bq27xxx_battery_settings(di);
>  	bq27xxx_battery_update(di);

This change could be useful, specially if somebody got device with
sn27521 chip which is not in revision 14 (no idea if in world are those
chips used) -- at least would get message that current driver does not
support it.

-- 
Pali Rohár
pali.rohar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4.14] Add support for bq27521 battery monitor

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 5198 bytes --]

 
This adds basic support for BQ27521 battery monitor, used in Nokia N9
and N950. In particular, battery voltage is important to be able to
tell when the battery is almost empty. Emptying battery on N950 is
pretty painful, as flasher needs to be used to recover phone in such case.

Signed-off-by: Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>

diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 51f0961..f684288 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -323,6 +323,30 @@ static u8
 		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
 		BQ27XXX_DM_REG_ROWS,
 	},
+	bq27521_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x02,
+		[BQ27XXX_REG_TEMP] = 0x0a,
+		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_VOLT] = 0x0c,
+		[BQ27XXX_REG_AI] = 0x0e,
+		[BQ27XXX_REG_FLAGS] = 0x08,
+		[BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
+		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
+	},
 	bq27530_regs[BQ27XXX_REG_MAX] = {
 		[BQ27XXX_REG_CTRL] = 0x00,
 		[BQ27XXX_REG_TEMP] = 0x06,
@@ -557,6 +581,15 @@ static enum power_supply_property bq27520g4_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
+static enum power_supply_property bq27521_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+};
+
 static enum power_supply_property bq27530_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_PRESENT,
@@ -671,6 +704,7 @@ static struct bq27xxx_dm_reg bq27500_dm_regs[] = {
 #define bq27520g2_dm_regs 0
 #define bq27520g3_dm_regs 0
 #define bq27520g4_dm_regs 0
+#define bq27521_dm_regs 0
 #define bq27530_dm_regs 0
 #define bq27531_dm_regs 0
 #define bq27541_dm_regs 0
@@ -717,8 +751,8 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
 #endif
 
 #define BQ27XXX_O_ZERO	0x00000001
-#define BQ27XXX_O_OTDC	0x00000002
-#define BQ27XXX_O_UTOT  0x00000004
+#define BQ27XXX_O_OTDC	0x00000002 /* has OTC/OTD overtemperature flags */
+#define BQ27XXX_O_UTOT  0x00000004 /* has OT overtemperature flag */
 #define BQ27XXX_O_CFGUP	0x00000008
 #define BQ27XXX_O_RAM	0x00000010
 
@@ -751,6 +785,7 @@ static struct {
 	[BQ27520G2] = BQ27XXX_DATA(bq27520g2, 0         , BQ27XXX_O_OTDC),
 	[BQ27520G3] = BQ27XXX_DATA(bq27520g3, 0         , BQ27XXX_O_OTDC),
 	[BQ27520G4] = BQ27XXX_DATA(bq27520g4, 0         , BQ27XXX_O_OTDC),
+	[BQ27521]   = BQ27XXX_DATA(bq27521,   0         , 0),
 	[BQ27530]   = BQ27XXX_DATA(bq27530,   0         , BQ27XXX_O_UTOT),
 	[BQ27531]   = BQ27XXX_DATA(bq27531,   0         , BQ27XXX_O_UTOT),
 	[BQ27541]   = BQ27XXX_DATA(bq27541,   0         , BQ27XXX_O_OTDC),
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index 0b11ed4..6b25e5f 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -239,6 +239,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27520g2", BQ27520G2 },
 	{ "bq27520g3", BQ27520G3 },
 	{ "bq27520g4", BQ27520G4 },
+	{ "bq27521", BQ27521 },
 	{ "bq27530", BQ27530 },
 	{ "bq27531", BQ27531 },
 	{ "bq27541", BQ27541 },
@@ -269,6 +270,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
 	{ .compatible = "ti,bq27520g2" },
 	{ .compatible = "ti,bq27520g3" },
 	{ .compatible = "ti,bq27520g4" },
+	{ .compatible = "ti,bq27521" },
 	{ .compatible = "ti,bq27530" },
 	{ .compatible = "ti,bq27531" },
 	{ .compatible = "ti,bq27541" },
diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
index 9ad7828..6547d30 100644
--- a/include/linux/mfd/twl.h
+++ b/include/linux/mfd/twl.h
@@ -70,6 +70,7 @@ enum twl4030_module_ids {
 	TWL4030_MODULE_INT,
 
 	TWL5031_MODULE_ACCESSORY,
+	TWL5031_MODULE_BCC,
 	TWL5031_MODULE_INTERRUPTS,
 
 	TWL4030_MODULE_LAST,
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index 43194e0..d8d127a 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -15,6 +15,7 @@ enum bq27xxx_chip {
 	BQ27520G2, /* bq27520G2 */
 	BQ27520G3, /* bq27520G3 */
 	BQ27520G4, /* bq27520G4 */
+	BQ27521, /* bq27521 */	
 	BQ27530, /* bq27530, bq27531 */
 	BQ27531,
 	BQ27541, /* bq27541, bq27542, bq27546, bq27742 */

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH v4.14] Add support for bq27521 battery monitor

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 5642 bytes --]

Hi!

> This adds basic support for BQ27521 battery monitor, used in Nokia N9
> and N950. In particular, battery voltage is important to be able to
> tell when the battery is almost empty. Emptying battery on N950 is
> pretty painful, as flasher needs to be used to recover phone in such
> case.

Sebastian, ping? This one should not be too controversial.

If you could also apply the "shut down when battery is low", that
would be nice.

Thanks,
								Pavel

> Signed-off-by: Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>
> 
> diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
> index 51f0961..f684288 100644
> --- a/drivers/power/supply/bq27xxx_battery.c
> +++ b/drivers/power/supply/bq27xxx_battery.c
> @@ -323,6 +323,30 @@ static u8
>  		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
>  		BQ27XXX_DM_REG_ROWS,
>  	},
> +	bq27521_regs[BQ27XXX_REG_MAX] = {
> +		[BQ27XXX_REG_CTRL] = 0x02,
> +		[BQ27XXX_REG_TEMP] = 0x0a,
> +		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_VOLT] = 0x0c,
> +		[BQ27XXX_REG_AI] = 0x0e,
> +		[BQ27XXX_REG_FLAGS] = 0x08,
> +		[BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
> +		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
> +		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
> +	},
>  	bq27530_regs[BQ27XXX_REG_MAX] = {
>  		[BQ27XXX_REG_CTRL] = 0x00,
>  		[BQ27XXX_REG_TEMP] = 0x06,
> @@ -557,6 +581,15 @@ static enum power_supply_property bq27520g4_props[] = {
>  	POWER_SUPPLY_PROP_MANUFACTURER,
>  };
>  
> +static enum power_supply_property bq27521_props[] = {
> +	POWER_SUPPLY_PROP_STATUS,
> +	POWER_SUPPLY_PROP_PRESENT,
> +	POWER_SUPPLY_PROP_VOLTAGE_NOW,
> +	POWER_SUPPLY_PROP_CURRENT_NOW,
> +	POWER_SUPPLY_PROP_TEMP,
> +	POWER_SUPPLY_PROP_TECHNOLOGY,
> +};
> +
>  static enum power_supply_property bq27530_props[] = {
>  	POWER_SUPPLY_PROP_STATUS,
>  	POWER_SUPPLY_PROP_PRESENT,
> @@ -671,6 +704,7 @@ static struct bq27xxx_dm_reg bq27500_dm_regs[] = {
>  #define bq27520g2_dm_regs 0
>  #define bq27520g3_dm_regs 0
>  #define bq27520g4_dm_regs 0
> +#define bq27521_dm_regs 0
>  #define bq27530_dm_regs 0
>  #define bq27531_dm_regs 0
>  #define bq27541_dm_regs 0
> @@ -717,8 +751,8 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
>  #endif
>  
>  #define BQ27XXX_O_ZERO	0x00000001
> -#define BQ27XXX_O_OTDC	0x00000002
> -#define BQ27XXX_O_UTOT  0x00000004
> +#define BQ27XXX_O_OTDC	0x00000002 /* has OTC/OTD overtemperature flags */
> +#define BQ27XXX_O_UTOT  0x00000004 /* has OT overtemperature flag */
>  #define BQ27XXX_O_CFGUP	0x00000008
>  #define BQ27XXX_O_RAM	0x00000010
>  
> @@ -751,6 +785,7 @@ static struct {
>  	[BQ27520G2] = BQ27XXX_DATA(bq27520g2, 0         , BQ27XXX_O_OTDC),
>  	[BQ27520G3] = BQ27XXX_DATA(bq27520g3, 0         , BQ27XXX_O_OTDC),
>  	[BQ27520G4] = BQ27XXX_DATA(bq27520g4, 0         , BQ27XXX_O_OTDC),
> +	[BQ27521]   = BQ27XXX_DATA(bq27521,   0         , 0),
>  	[BQ27530]   = BQ27XXX_DATA(bq27530,   0         , BQ27XXX_O_UTOT),
>  	[BQ27531]   = BQ27XXX_DATA(bq27531,   0         , BQ27XXX_O_UTOT),
>  	[BQ27541]   = BQ27XXX_DATA(bq27541,   0         , BQ27XXX_O_OTDC),
> diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
> index 0b11ed4..6b25e5f 100644
> --- a/drivers/power/supply/bq27xxx_battery_i2c.c
> +++ b/drivers/power/supply/bq27xxx_battery_i2c.c
> @@ -239,6 +239,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
>  	{ "bq27520g2", BQ27520G2 },
>  	{ "bq27520g3", BQ27520G3 },
>  	{ "bq27520g4", BQ27520G4 },
> +	{ "bq27521", BQ27521 },
>  	{ "bq27530", BQ27530 },
>  	{ "bq27531", BQ27531 },
>  	{ "bq27541", BQ27541 },
> @@ -269,6 +270,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
>  	{ .compatible = "ti,bq27520g2" },
>  	{ .compatible = "ti,bq27520g3" },
>  	{ .compatible = "ti,bq27520g4" },
> +	{ .compatible = "ti,bq27521" },
>  	{ .compatible = "ti,bq27530" },
>  	{ .compatible = "ti,bq27531" },
>  	{ .compatible = "ti,bq27541" },
> diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
> index 9ad7828..6547d30 100644
> --- a/include/linux/mfd/twl.h
> +++ b/include/linux/mfd/twl.h
> @@ -70,6 +70,7 @@ enum twl4030_module_ids {
>  	TWL4030_MODULE_INT,
>  
>  	TWL5031_MODULE_ACCESSORY,
> +	TWL5031_MODULE_BCC,
>  	TWL5031_MODULE_INTERRUPTS,
>  
>  	TWL4030_MODULE_LAST,
> diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
> index 43194e0..d8d127a 100644
> --- a/include/linux/power/bq27xxx_battery.h
> +++ b/include/linux/power/bq27xxx_battery.h
> @@ -15,6 +15,7 @@ enum bq27xxx_chip {
>  	BQ27520G2, /* bq27520G2 */
>  	BQ27520G3, /* bq27520G3 */
>  	BQ27520G4, /* bq27520G4 */
> +	BQ27521, /* bq27521 */	
>  	BQ27530, /* bq27530, bq27531 */
>  	BQ27531,
>  	BQ27541, /* bq27541, bq27542, bq27546, bq27742 */
> 



-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH v4.14] Add support for bq27521 battery monitor

[Andrew F. Davis]

On 12/01/2017 05:06 PM, Pavel Machek wrote:
> Hi!
> 
>> This adds basic support for BQ27521 battery monitor, used in Nokia N9
>> and N950. In particular, battery voltage is important to be able to
>> tell when the battery is almost empty. Emptying battery on N950 is
>> pretty painful, as flasher needs to be used to recover phone in such
>> case.
> 
> Sebastian, ping? This one should not be too controversial.
> 
> If you could also apply the "shut down when battery is low", that
> would be nice.
> 
> Thanks,
> 								Pavel
> 
>> Signed-off-by: Pavel Machek <pavel@ucw.cz>
>>
>> diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
>> index 51f0961..f684288 100644
>> --- a/drivers/power/supply/bq27xxx_battery.c
>> +++ b/drivers/power/supply/bq27xxx_battery.c
>> @@ -323,6 +323,30 @@ static u8
>>  		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
>>  		BQ27XXX_DM_REG_ROWS,
>>  	},
>> +	bq27521_regs[BQ27XXX_REG_MAX] = {
>> +		[BQ27XXX_REG_CTRL] = 0x02,
>> +		[BQ27XXX_REG_TEMP] = 0x0a,
>> +		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_VOLT] = 0x0c,
>> +		[BQ27XXX_REG_AI] = 0x0e,
>> +		[BQ27XXX_REG_FLAGS] = 0x08,
>> +		[BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
>> +		[BQ27XXX_REG_AP] = INVALID_REG_ADDR,
>> +		[BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
>> +		[BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
>> +		[BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
>> +		[BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
>> +		[BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
>> +	},
>>  	bq27530_regs[BQ27XXX_REG_MAX] = {
>>  		[BQ27XXX_REG_CTRL] = 0x00,
>>  		[BQ27XXX_REG_TEMP] = 0x06,
>> @@ -557,6 +581,15 @@ static enum power_supply_property bq27520g4_props[] = {
>>  	POWER_SUPPLY_PROP_MANUFACTURER,
>>  };
>>  
>> +static enum power_supply_property bq27521_props[] = {
>> +	POWER_SUPPLY_PROP_STATUS,
>> +	POWER_SUPPLY_PROP_PRESENT,
>> +	POWER_SUPPLY_PROP_VOLTAGE_NOW,
>> +	POWER_SUPPLY_PROP_CURRENT_NOW,
>> +	POWER_SUPPLY_PROP_TEMP,
>> +	POWER_SUPPLY_PROP_TECHNOLOGY,
>> +};
>> +
>>  static enum power_supply_property bq27530_props[] = {
>>  	POWER_SUPPLY_PROP_STATUS,
>>  	POWER_SUPPLY_PROP_PRESENT,
>> @@ -671,6 +704,7 @@ static struct bq27xxx_dm_reg bq27500_dm_regs[] = {
>>  #define bq27520g2_dm_regs 0
>>  #define bq27520g3_dm_regs 0
>>  #define bq27520g4_dm_regs 0
>> +#define bq27521_dm_regs 0
>>  #define bq27530_dm_regs 0
>>  #define bq27531_dm_regs 0
>>  #define bq27541_dm_regs 0
>> @@ -717,8 +751,8 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
>>  #endif
>>  
>>  #define BQ27XXX_O_ZERO	0x00000001
>> -#define BQ27XXX_O_OTDC	0x00000002
>> -#define BQ27XXX_O_UTOT  0x00000004
>> +#define BQ27XXX_O_OTDC	0x00000002 /* has OTC/OTD overtemperature flags */
>> +#define BQ27XXX_O_UTOT  0x00000004 /* has OT overtemperature flag */

These should get turned into BIT() macros, but that's not your problem
for this patch,


Acked-by: Andrew F. Davis <afd@ti.com>


>>  #define BQ27XXX_O_CFGUP	0x00000008
>>  #define BQ27XXX_O_RAM	0x00000010
>>  
>> @@ -751,6 +785,7 @@ static struct {
>>  	[BQ27520G2] = BQ27XXX_DATA(bq27520g2, 0         , BQ27XXX_O_OTDC),
>>  	[BQ27520G3] = BQ27XXX_DATA(bq27520g3, 0         , BQ27XXX_O_OTDC),
>>  	[BQ27520G4] = BQ27XXX_DATA(bq27520g4, 0         , BQ27XXX_O_OTDC),
>> +	[BQ27521]   = BQ27XXX_DATA(bq27521,   0         , 0),
>>  	[BQ27530]   = BQ27XXX_DATA(bq27530,   0         , BQ27XXX_O_UTOT),
>>  	[BQ27531]   = BQ27XXX_DATA(bq27531,   0         , BQ27XXX_O_UTOT),
>>  	[BQ27541]   = BQ27XXX_DATA(bq27541,   0         , BQ27XXX_O_OTDC),
>> diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
>> index 0b11ed4..6b25e5f 100644
>> --- a/drivers/power/supply/bq27xxx_battery_i2c.c
>> +++ b/drivers/power/supply/bq27xxx_battery_i2c.c
>> @@ -239,6 +239,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
>>  	{ "bq27520g2", BQ27520G2 },
>>  	{ "bq27520g3", BQ27520G3 },
>>  	{ "bq27520g4", BQ27520G4 },
>> +	{ "bq27521", BQ27521 },
>>  	{ "bq27530", BQ27530 },
>>  	{ "bq27531", BQ27531 },
>>  	{ "bq27541", BQ27541 },
>> @@ -269,6 +270,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
>>  	{ .compatible = "ti,bq27520g2" },
>>  	{ .compatible = "ti,bq27520g3" },
>>  	{ .compatible = "ti,bq27520g4" },
>> +	{ .compatible = "ti,bq27521" },
>>  	{ .compatible = "ti,bq27530" },
>>  	{ .compatible = "ti,bq27531" },
>>  	{ .compatible = "ti,bq27541" },
>> diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
>> index 9ad7828..6547d30 100644
>> --- a/include/linux/mfd/twl.h
>> +++ b/include/linux/mfd/twl.h
>> @@ -70,6 +70,7 @@ enum twl4030_module_ids {
>>  	TWL4030_MODULE_INT,
>>  
>>  	TWL5031_MODULE_ACCESSORY,
>> +	TWL5031_MODULE_BCC,
>>  	TWL5031_MODULE_INTERRUPTS,
>>  
>>  	TWL4030_MODULE_LAST,
>> diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
>> index 43194e0..d8d127a 100644
>> --- a/include/linux/power/bq27xxx_battery.h
>> +++ b/include/linux/power/bq27xxx_battery.h
>> @@ -15,6 +15,7 @@ enum bq27xxx_chip {
>>  	BQ27520G2, /* bq27520G2 */
>>  	BQ27520G3, /* bq27520G3 */
>>  	BQ27520G4, /* bq27520G4 */
>> +	BQ27521, /* bq27521 */	
>>  	BQ27530, /* bq27530, bq27531 */
>>  	BQ27531,
>>  	BQ27541, /* bq27541, bq27542, bq27546, bq27742 */
>>
> 
> 
> 

Re: [PATCH v4.14] Add support for bq27521 battery monitor

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 952 bytes --]

Hi,

On Mon, Dec 04, 2017 at 09:20:33AM -0600, Andrew F. Davis wrote:
> On 12/01/2017 05:06 PM, Pavel Machek wrote:
> > Hi!
> > 
> >> This adds basic support for BQ27521 battery monitor, used in Nokia N9
> >> and N950. In particular, battery voltage is important to be able to
> >> tell when the battery is almost empty. Emptying battery on N950 is
> >> pretty painful, as flasher needs to be used to recover phone in such
> >> case.
> > 
> > Sebastian, ping? This one should not be too controversial.
>
> Acked-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>

Thanks, queued, I dropped the spurious change in twl.h and added the
dt-binding from the previous patch version, that was lost somehow.

> > If you could also apply the "shut down when battery is low", that
> > would be nice.

I only have one with values specific to N900 hardcoded in the
driver. That one can't be applied for obvious reasons.

-- Sebastian

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Lithium battery protection was Re: [PATCH v4.14] Add support for bq27521 battery monitor

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1355 bytes --]

Hi!

> > >> This adds basic support for BQ27521 battery monitor, used in Nokia N9
> > >> and N950. In particular, battery voltage is important to be able to
> > >> tell when the battery is almost empty. Emptying battery on N950 is
> > >> pretty painful, as flasher needs to be used to recover phone in such
> > >> case.
> > > 
> > > Sebastian, ping? This one should not be too controversial.
> >
> > Acked-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>
> 
> Thanks, queued, I dropped the spurious change in twl.h and added the
> dt-binding from the previous patch version, that was lost somehow.

Thanks!

> > > If you could also apply the "shut down when battery is low", that
> > > would be nice.
> 
> I only have one with values specific to N900 hardcoded in the
> driver. That one can't be applied for obvious reasons.

Well... the values are not really N900-specific. They should work well
on anything with lithium battery, because they basically depend only
on battery chemistry.

I guess I can simplify patch to work with battery voltage only --
that's what hardware battery protection does -- and make shutdown
voltage configurable ...?

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH] Add support for bq27521 battery monitor

[Rob Herring]

On Thu, Nov 09, 2017 at 10:06:15PM +0100, Pavel Machek wrote:
> 
> This adds basic support for BQ27521 battery monitor, used in Nokia N9
> and N950. In particular, battery voltage is important to be able to
> tell when the battery is almost empty. Emptying battery on N950 is
> pretty painful, as flasher needs to be used to recover phone in such case.
> 
> Signed-off-by: Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>

For the binding,

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html