* [PATCH] ARM: dts: am43xx: Fix inverted DS0_PULL_UP_DOWN_EN macro
@ 2017-12-13 21:24 Dave Gerlach
[not found] ` <20171213212443.22632-1-d-gerlach-l0cyMroinI0@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Dave Gerlach @ 2017-12-13 21:24 UTC (permalink / raw)
To: Tony Lindgren
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, Dave Gerlach
Due to a mistake in documentation the DS0_PULL_UP_DOWN_EN macro was
mistakenly defined as an active high bit, however setting the bit
actually disables the internal pull resistor on the pin, so correct this
macro and introduce a new DS0_PULL_UP_DOWN_DIS macro with the proper bit
value set now that the documentation has been updated.
Change based on AM437x Techninal Reference Manual SPRUHL7G Revised June
2017 Section 7.2.1.
Signed-off-by: Dave Gerlach <d-gerlach-l0cyMroinI0@public.gmane.org>
---
include/dt-bindings/pinctrl/am43xx.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
index a69e310789c5..6ce4a32f77d4 100644
--- a/include/dt-bindings/pinctrl/am43xx.h
+++ b/include/dt-bindings/pinctrl/am43xx.h
@@ -25,7 +25,8 @@
#define DS0_FORCE_OFF_MODE (1 << 24)
#define DS0_INPUT (1 << 25)
#define DS0_FORCE_OUT_HIGH (1 << 26)
-#define DS0_PULL_UP_DOWN_EN (1 << 27)
+#define DS0_PULL_UP_DOWN_EN (0 << 27)
+#define DS0_PULL_UP_DOWN_DIS (1 << 27)
#define DS0_PULL_UP_SEL (1 << 28)
#define WAKEUP_ENABLE (1 << 29)
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ARM: dts: am43xx: Fix inverted DS0_PULL_UP_DOWN_EN macro
[not found] ` <20171213212443.22632-1-d-gerlach-l0cyMroinI0@public.gmane.org>
@ 2017-12-15 16:44 ` Tony Lindgren
0 siblings, 0 replies; 2+ messages in thread
From: Tony Lindgren @ 2017-12-15 16:44 UTC (permalink / raw)
To: Dave Gerlach
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA
* Dave Gerlach <d-gerlach-l0cyMroinI0@public.gmane.org> [171213 13:27]:
> Due to a mistake in documentation the DS0_PULL_UP_DOWN_EN macro was
> mistakenly defined as an active high bit, however setting the bit
> actually disables the internal pull resistor on the pin, so correct this
> macro and introduce a new DS0_PULL_UP_DOWN_DIS macro with the proper bit
> value set now that the documentation has been updated.
>
> Change based on AM437x Techninal Reference Manual SPRUHL7G Revised June
> 2017 Section 7.2.1.
Applying into omap-for-v4.16/dt thanks,
Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-12-15 16:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-12-13 21:24 [PATCH] ARM: dts: am43xx: Fix inverted DS0_PULL_UP_DOWN_EN macro Dave Gerlach
[not found] ` <20171213212443.22632-1-d-gerlach-l0cyMroinI0@public.gmane.org>
2017-12-15 16:44 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).