[PATCH v3 00/19] ARM: dts: aspeed: updates and new machines

[PATCH v3 00/19] ARM: dts: aspeed: updates and new machines

[Joel Stanley]

This series of device tree patches for the ASPEED BMC machines
moves all systems to use the soon to be merged clk driver, and
updates machines to use all of the drivers we have upstream.

 v3: Address review from Rob and Cedric
  - Move aspeed-gpio.h usage out into the patches where use of the GPIO
    is added
  - Clarify that the aspeed-clock.h patch will be merged as part of
    the device tree tree. This is to ensure we don't depend on the clk
    tree for building.
  - Fix duplicate flash controller nodes in Romulus
 v2: Address review from Arnd
  - Remove NUM_CLKS from dt header
  - Send VUART patch as a fix, drop it from this series
  - Add reasoning for breaking old kernel in the 'proper clock
    references' patch

In addition it adds three new OpenBMC systems that have been developed
in the OpenBMC kernel tree over the past year: two Power9 OpenPower
systems, and a port by Google to a Quanta x86 server.

I have boot tested these on Romulus and Palmetto, as well as boot tested
all device trees in Qemu.

Please review the boards you are familiar with. I will merge these in to
the ASPEED ARM SoC tree for inclusion in 4.16.

Andrew Jeffery (1):
  ARM: dts: aspeed: Add LPC and child devices

Joel Stanley (16):
  dt-bindings: clock: Add ASPEED constants
  dt-bindings: gpio: Add ASPEED constants
  ARM: dts: aspeed: Add proper clock references
  ARM: dts: aspeed: Add MAC clocks
  ARM: dts: aspeed: Add watchdog clocks
  ARM: dts: aspeed: Add flash controller clocks
  ARM: dts: aspeed: Add clock phandle to GPIO
  ARM: dts: aspeed: Add PWM and tachometer node
  ARM: dts: aspeed: Add LPC Snoop device
  ARM: dts: aspeed: Remove skeleton.dtsi
  ARM: dts: aspeed: Update license headers
  ARM: dts: Add OpenBMC flash layout
  ARM: dts: aspeed: Sort ASPEED entries in makefile
  ARM: dts: aspeed: Add Witherspoon BMC machine
  ARM: dts: aspeed-romulus: Update Romulus system
  ARM: dts: aspeed-plametto: Add flash layout

Rick Altherr (1):
  ARM: dts: aspeed: Add Qanta Q71L BMC machine

Xo Wang (1):
  ARM: dts: aspeed: Add Ingrasys Zaius BMC machine

 arch/arm/boot/dts/Makefile                       |   8 +-
 arch/arm/boot/dts/aspeed-ast2500-evb.dts         |   2 +-
 arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts    |   3 +-
 arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts     | 157 ++++++-
 arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts | 548 +++++++++++++++++++++++
 arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts       | 426 ++++++++++++++++++
 arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts     | 458 +++++++++++++++++++
 arch/arm/boot/dts/aspeed-g4.dtsi                 | 163 ++++---
 arch/arm/boot/dts/aspeed-g5.dtsi                 | 154 ++++---
 arch/arm/boot/dts/openbmc-flash-layout.dtsi      |  32 ++
 include/dt-bindings/clock/aspeed-clock.h         |  52 +++
 include/dt-bindings/gpio/aspeed-gpio.h           |  49 ++
 12 files changed, 1905 insertions(+), 147 deletions(-)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
 create mode 100644 arch/arm/boot/dts/openbmc-flash-layout.dtsi
 create mode 100644 include/dt-bindings/clock/aspeed-clock.h
 create mode 100644 include/dt-bindings/gpio/aspeed-gpio.h

-- 
2.15.1

[PATCH v3 01/20] dt-bindings: clock: Add ASPEED constants

[Joel Stanley]

These will be used by the clock driver. This commit is included so
the tree will build without the clock series being applied.

Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
 v3:
  - Clarify that the clock defines will be merged as part of the dt
  changes, so that the device tree merge will not depend on the clock
  tree
 v2:
  - remove NUM_CLKS define. There's no need for it to be part of ABI
---
 include/dt-bindings/clock/aspeed-clock.h | 52 ++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 include/dt-bindings/clock/aspeed-clock.h

diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h
new file mode 100644
index 000000000000..d3558d897a4d
--- /dev/null
+++ b/include/dt-bindings/clock/aspeed-clock.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+#ifndef DT_BINDINGS_ASPEED_CLOCK_H
+#define DT_BINDINGS_ASPEED_CLOCK_H
+
+#define ASPEED_CLK_GATE_ECLK		0
+#define ASPEED_CLK_GATE_GCLK		1
+#define ASPEED_CLK_GATE_MCLK		2
+#define ASPEED_CLK_GATE_VCLK		3
+#define ASPEED_CLK_GATE_BCLK		4
+#define ASPEED_CLK_GATE_DCLK		5
+#define ASPEED_CLK_GATE_REFCLK		6
+#define ASPEED_CLK_GATE_USBPORT2CLK	7
+#define ASPEED_CLK_GATE_LCLK		8
+#define ASPEED_CLK_GATE_USBUHCICLK	9
+#define ASPEED_CLK_GATE_D1CLK		10
+#define ASPEED_CLK_GATE_YCLK		11
+#define ASPEED_CLK_GATE_USBPORT1CLK	12
+#define ASPEED_CLK_GATE_UART1CLK	13
+#define ASPEED_CLK_GATE_UART2CLK	14
+#define ASPEED_CLK_GATE_UART5CLK	15
+#define ASPEED_CLK_GATE_ESPICLK		16
+#define ASPEED_CLK_GATE_MAC1CLK		17
+#define ASPEED_CLK_GATE_MAC2CLK		18
+#define ASPEED_CLK_GATE_RSACLK		19
+#define ASPEED_CLK_GATE_UART3CLK	20
+#define ASPEED_CLK_GATE_UART4CLK	21
+#define ASPEED_CLK_GATE_SDCLKCLK	22
+#define ASPEED_CLK_GATE_LHCCLK		23
+#define ASPEED_CLK_HPLL			24
+#define ASPEED_CLK_AHB			25
+#define ASPEED_CLK_APB			26
+#define ASPEED_CLK_UART			27
+#define ASPEED_CLK_SDIO			28
+#define ASPEED_CLK_ECLK			29
+#define ASPEED_CLK_ECLK_MUX		30
+#define ASPEED_CLK_LHCLK		31
+#define ASPEED_CLK_MAC			32
+#define ASPEED_CLK_BCLK			33
+#define ASPEED_CLK_MPLL			34
+
+#define ASPEED_RESET_XDMA		0
+#define ASPEED_RESET_MCTP		1
+#define ASPEED_RESET_ADC		2
+#define ASPEED_RESET_JTAG_MASTER	3
+#define ASPEED_RESET_MIC		4
+#define ASPEED_RESET_PWM		5
+#define ASPEED_RESET_PCIVGA		6
+#define ASPEED_RESET_I2C		7
+#define ASPEED_RESET_AHB		8
+
+#endif
-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 03/20] ARM: dts: aspeed: Add LPC and child devices

[Joel Stanley]

From: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>

Ensure the ordering is correct and add all of the children in the SoC
device trees for the ast2400 and ast2500.

Signed-off-by: Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>
Reviewed-by: Cédric Le Goater <clg-Bxea+6Xhats@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
v3:
 - Fix ast2400 compatible string
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 35 +++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 27 +++++++++++++++++----------
 2 files changed, 52 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 45d815a86d42..9422f9cb1e11 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -225,6 +225,41 @@
 				status = "disabled";
 			};
 
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2400-lpc", "simple-mfd";
+				reg = <0x1e789000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				lpc_bmc: lpc-bmc@0 {
+					compatible = "aspeed,ast2400-lpc-bmc";
+					reg = <0x0 0x80>;
+				};
+
+				lpc_host: lpc-host@80 {
+					compatible = "aspeed,ast2400-lpc-host", "simple-mfd", "syscon";
+					reg = <0x80 0x1e0>;
+					reg-io-width = <4>;
+
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x80 0x1e0>;
+
+					lpc_ctrl: lpc-ctrl@0 {
+						compatible = "aspeed,ast2400-lpc-ctrl";
+						reg = <0x0 0x80>;
+						status = "disabled";
+					};
+
+					lhc: lhc@20 {
+						compatible = "aspeed,ast2400-lhc";
+						reg = <0x20 0x24 0x48 0x8>;
+					};
+				};
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5c4ecdba3a6b..069f13df19d1 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -265,6 +265,16 @@
 				status = "disabled";
 			};
 
+			vuart: serial@1e787000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&clk_uart>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2500-lpc", "simple-mfd";
 				reg = <0x1e789000 0x1000>;
@@ -288,6 +298,13 @@
 
 					reg-io-width = <4>;
 
+					lpc_ctrl: lpc-ctrl@0 {
+						compatible = "aspeed,ast2500-lpc-ctrl";
+						reg = <0x0 0x80>;
+						status = "disabled";
+					};
+
+
 					lhc: lhc@20 {
 						compatible = "aspeed,ast2500-lhc";
 						reg = <0x20 0x24 0x48 0x8>;
@@ -295,16 +312,6 @@
 				};
 			};
 
-			vuart: serial@1e787000 {
-				compatible = "aspeed,ast2500-vuart";
-				reg = <0x1e787000 0x40>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&clk_uart>;
-				no-loopback-test;
-				status = "disabled";
-			};
-
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 04/20] ARM: dts: aspeed: Add proper clock references

[Joel Stanley]

This device tree will break existing kernels that do not have the clk
patches applied (no clocksource, as we don't know the speed of the APB
clock.  You can boot if you pass a lpj value on the command line, but
won't have a uart).

Older device trees running with the newer kernel will function as well
as pre-4.16 kernels. That is, that some IP blocks (i2c, pwm/tach, adc)
will not work as the kernel lacks reset controller and clock enabling.

This is being changed as existing device trees use fixed-clocks in order
to boot without a clk driver. The newly added clk driver provides proper
clock support, including gating, so we move the device trees over to
properly request clocks.

The SCU compatible string is updated as the g4-scu string made it into
the tree before we decided on aspeed,astX000-<ip> as the format for the
strings. The old string will be removed from the bindings in a future
patch.

Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
 v3:
  - Add reset phandle to ADC node
 v2:
  - Add more detail to the commit message

adc reset

Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 103 ++++++++++++++++----------------------
 arch/arm/boot/dts/aspeed-g5.dtsi | 105 ++++++++++++++++-----------------------
 2 files changed, 84 insertions(+), 124 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 9422f9cb1e11..b938759f799e 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "skeleton.dtsi"
+#include <dt-bindings/clock/aspeed-clock.h>
 
 / {
 	model = "Aspeed BMC";
@@ -106,47 +107,12 @@
 			ranges;
 
 			syscon: syscon@1e6e2000 {
-				compatible = "aspeed,g4-scu", "syscon", "simple-mfd";
+				compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-
-                                clk_clkin: clk_clkin {
-                                        #clock-cells = <0>;
-                                        compatible = "fixed-clock";
-                                        clock-frequency = <48000000>;
-                                };
-
-                                clk_hpll: clk_hpll@70 {
-                                        #clock-cells = <0>;
-                                        compatible = "aspeed,g4-hpll-clock", "fixed-clock";
-                                        reg = <0x70>;
-                                        clocks = <&clk_clkin>;
-                                        clock-frequency = <384000000>;
-                                };
-
-                                clk_ahb: clk_ahb@70 {
-                                        #clock-cells = <0>;
-                                        compatible = "aspeed,g4-ahb-clock", "fixed-clock";
-                                        reg = <0x70>;
-                                        clocks = <&clk_hpll>;
-                                        clock-frequency = <192000000>;
-                                };
-
-                                clk_apb: clk_apb@8 {
-                                        #clock-cells = <0>;
-                                        compatible = "aspeed,g4-apb-clock", "fixed-clock";
-                                        reg = <0x08>;
-                                        clocks = <&clk_hpll>;
-                                        clock-frequency = <48000000>;
-                                };
-
-                                clk_uart: clk_uart@2c{
-                                        #clock-cells = <0>;
-                                        compatible = "aspeed,g4-uart-clock", "fixed-clock";
-                                        reg = <0x2c>;
-                                        clock-frequency = <24000000>;
-                                };
+				#clock-cells = <1>;
+				#reset-cells = <1>;
 
 				pinctrl: pinctrl {
 					compatible = "aspeed,g4-pinctrl";
@@ -156,7 +122,8 @@
 			adc: adc@1e6e9000 {
 				compatible = "aspeed,ast2400-adc";
 				reg = <0x1e6e9000 0xb0>;
-				clocks = <&clk_apb>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				resets = <&syscon ASPEED_RESET_ADC>;
 				#io-channel-cells = <1>;
 				status = "disabled";
 			};
@@ -181,7 +148,7 @@
 				compatible = "aspeed,ast2400-timer";
 				reg = <0x1e782000 0x90>;
 				interrupts = <16 17 18 35 36 37 38 39>;
-				clocks = <&clk_apb>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 				clock-names = "PCLK";
 			};
 
@@ -190,7 +157,7 @@
 				reg = <0x1e783000 0x20>;
 				reg-shift = <2>;
 				interrupts = <9>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -200,7 +167,7 @@
 				reg = <0x1e784000 0x20>;
 				reg-shift = <2>;
 				interrupts = <10>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -219,8 +186,8 @@
 				compatible = "aspeed,ast2400-vuart";
 				reg = <0x1e787000 0x40>;
 				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&clk_uart>;
+				interrupts = <8>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -265,7 +232,7 @@
 				reg = <0x1e78d000 0x20>;
 				reg-shift = <2>;
 				interrupts = <32>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -275,7 +242,7 @@
 				reg = <0x1e78e000 0x20>;
 				reg-shift = <2>;
 				interrupts = <33>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -285,7 +252,7 @@
 				reg = <0x1e78f000 0x20>;
 				reg-shift = <2>;
 				interrupts = <34>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -316,7 +283,8 @@
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <0>;
 		interrupt-parent = <&i2c_ic>;
@@ -331,7 +299,8 @@
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <1>;
 		interrupt-parent = <&i2c_ic>;
@@ -346,7 +315,8 @@
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <2>;
 		interrupt-parent = <&i2c_ic>;
@@ -362,7 +332,8 @@
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <3>;
 		interrupt-parent = <&i2c_ic>;
@@ -378,7 +349,8 @@
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <4>;
 		interrupt-parent = <&i2c_ic>;
@@ -394,7 +366,8 @@
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <5>;
 		interrupt-parent = <&i2c_ic>;
@@ -410,7 +383,8 @@
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <6>;
 		interrupt-parent = <&i2c_ic>;
@@ -426,7 +400,8 @@
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <7>;
 		interrupt-parent = <&i2c_ic>;
@@ -442,7 +417,8 @@
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <8>;
 		interrupt-parent = <&i2c_ic>;
@@ -458,7 +434,8 @@
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <9>;
 		interrupt-parent = <&i2c_ic>;
@@ -474,7 +451,8 @@
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <10>;
 		interrupt-parent = <&i2c_ic>;
@@ -490,7 +468,8 @@
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <11>;
 		interrupt-parent = <&i2c_ic>;
@@ -506,7 +485,8 @@
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <12>;
 		interrupt-parent = <&i2c_ic>;
@@ -522,7 +502,8 @@
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <13>;
 		interrupt-parent = <&i2c_ic>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 069f13df19d1..1af600b48475 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "skeleton.dtsi"
+#include <dt-bindings/clock/aspeed-clock.h>
 
 / {
 	model = "Aspeed BMC";
@@ -140,55 +141,18 @@
 			ranges;
 
 			syscon: syscon@1e6e2000 {
-				compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
+				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-
-				clk_clkin: clk_clkin@70 {
-					#clock-cells = <0>;
-					compatible = "aspeed,g5-clkin-clock", "fixed-clock";
-					reg = <0x70>;
-					clock-frequency = <24000000>;
-				};
-
-				clk_hpll: clk_hpll@24 {
-					#clock-cells = <0>;
-					compatible = "aspeed,g5-hpll-clock", "fixed-clock";
-					reg = <0x24>;
-					clocks = <&clk_clkin>;
-					clock-frequency = <792000000>;
-				};
-
-				clk_ahb: clk_ahb@70 {
-					#clock-cells = <0>;
-					compatible = "aspeed,g5-ahb-clock", "fixed-clock";
-					reg = <0x70>;
-					clocks = <&clk_hpll>;
-					clock-frequency = <198000000>;
-				};
-
-				clk_apb: clk_apb@8 {
-					#clock-cells = <0>;
-					compatible = "aspeed,g5-apb-clock", "fixed-clock";
-					reg = <0x08>;
-					clocks = <&clk_hpll>;
-					clock-frequency = <24750000>;
-				};
-
-				clk_uart: clk_uart@2c {
-					#clock-cells = <0>;
-					compatible = "aspeed,uart-clock", "fixed-clock";
-					reg = <0x2c>;
-					clock-frequency = <24000000>;
-				};
+				#clock-cells = <1>;
+				#reset-cells = <1>;
 
 				pinctrl: pinctrl {
 					compatible = "aspeed,g5-pinctrl";
 					aspeed,external-nodes = <&gfx &lhc>;
 
 				};
-
 			};
 
 			gfx: display@1e6e6000 {
@@ -200,7 +164,8 @@
 			adc: adc@1e6e9000 {
 				compatible = "aspeed,ast2500-adc";
 				reg = <0x1e6e9000 0xb0>;
-				clocks = <&clk_apb>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				resets = <&syscon ASPEED_RESET_ADC>;
 				#io-channel-cells = <1>;
 				status = "disabled";
 			};
@@ -225,7 +190,7 @@
 				compatible = "aspeed,ast2400-timer";
 				reg = <0x1e782000 0x90>;
 				interrupts = <16 17 18 35 36 37 38 39>;
-				clocks = <&clk_apb>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 				clock-names = "PCLK";
 			};
 
@@ -234,7 +199,7 @@
 				reg = <0x1e783000 0x20>;
 				reg-shift = <2>;
 				interrupts = <9>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -244,7 +209,7 @@
 				reg = <0x1e784000 0x20>;
 				reg-shift = <2>;
 				interrupts = <10>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -269,8 +234,8 @@
 				compatible = "aspeed,ast2500-vuart";
 				reg = <0x1e787000 0x40>;
 				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&clk_uart>;
+				interrupts = <8>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -317,7 +282,7 @@
 				reg = <0x1e78d000 0x20>;
 				reg-shift = <2>;
 				interrupts = <32>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -327,7 +292,7 @@
 				reg = <0x1e78e000 0x20>;
 				reg-shift = <2>;
 				interrupts = <33>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -337,7 +302,7 @@
 				reg = <0x1e78f000 0x20>;
 				reg-shift = <2>;
 				interrupts = <34>;
-				clocks = <&clk_uart>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
 				no-loopback-test;
 				status = "disabled";
 			};
@@ -368,7 +333,8 @@
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <0>;
 		interrupt-parent = <&i2c_ic>;
@@ -383,7 +349,8 @@
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <1>;
 		interrupt-parent = <&i2c_ic>;
@@ -398,7 +365,8 @@
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <2>;
 		interrupt-parent = <&i2c_ic>;
@@ -414,7 +382,8 @@
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <3>;
 		interrupt-parent = <&i2c_ic>;
@@ -430,7 +399,8 @@
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <4>;
 		interrupt-parent = <&i2c_ic>;
@@ -446,7 +416,8 @@
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <5>;
 		interrupt-parent = <&i2c_ic>;
@@ -462,7 +433,8 @@
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <6>;
 		interrupt-parent = <&i2c_ic>;
@@ -478,7 +450,8 @@
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <7>;
 		interrupt-parent = <&i2c_ic>;
@@ -494,7 +467,8 @@
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <8>;
 		interrupt-parent = <&i2c_ic>;
@@ -510,7 +484,8 @@
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <9>;
 		interrupt-parent = <&i2c_ic>;
@@ -526,7 +501,8 @@
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <10>;
 		interrupt-parent = <&i2c_ic>;
@@ -542,7 +518,8 @@
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <11>;
 		interrupt-parent = <&i2c_ic>;
@@ -558,7 +535,8 @@
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <12>;
 		interrupt-parent = <&i2c_ic>;
@@ -574,7 +552,8 @@
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <13>;
 		interrupt-parent = <&i2c_ic>;
-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 19/20] ARM: dts: aspeed-plametto: Add flash layout and fix memory node

[Joel Stanley]

The OpenBMC flash layout is used by Palmetto systems.

Add the unit name to the memory node to fix a warning with W=1.

Reviewed-by: Cédric Le Goater <clg-Bxea+6Xhats@public.gmane.org>
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
v3:
 - Added memory node unit name
---
 arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index a8f0c046e83e..4379d09a261f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -12,7 +12,7 @@
 		bootargs = "console=ttyS4,115200 earlyprintk";
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x20000000>;
 	};
 
@@ -34,6 +34,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
 	};
 };
 
-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 20/20] ARM: dts: aspeed-evb: Add unit name to memory node

[Joel Stanley]

Fixes a warning when building with W=1.

All of the ASPEED device trees build without warnings now.

Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
 arch/arm/boot/dts/aspeed-ast2500-evb.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 3e6f38e5d5d0..91a36c1f029b 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -16,7 +16,7 @@
 		bootargs = "console=ttyS4,115200 earlyprintk";
 	};
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x20000000>;
 	};
 };
-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 00/19] ARM: dts: aspeed: updates and new machines

[Joel Stanley]

On Wed, Dec 20, 2017 at 1:53 PM, Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org> wrote:
> This series of device tree patches for the ASPEED BMC machines
> moves all systems to use the soon to be merged clk driver, and
> updates machines to use all of the drivers we have upstream.
>
>  v3: Address review from Rob and Cedric
>   - Move aspeed-gpio.h usage out into the patches where use of the GPIO
>     is added
>   - Clarify that the aspeed-clock.h patch will be merged as part of
>     the device tree tree. This is to ensure we don't depend on the clk
>     tree for building.

Arnd, Michael, Stephen; how do we resolve this? We need the
dt-bindings header to be present for both the clk driver and the
device tree to build.

The clk driver is not (yet - soon I hope?) merged by Michael and
Stephen. I am about to commit the device tree changes that will go
through the ARM SoC tree.

Cheers,

Joel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 00/19] ARM: dts: aspeed: updates and new machines

[Arnd Bergmann]

On Wed, Dec 20, 2017 at 4:37 AM, Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org> wrote:
> On Wed, Dec 20, 2017 at 1:53 PM, Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org> wrote:
>> This series of device tree patches for the ASPEED BMC machines
>> moves all systems to use the soon to be merged clk driver, and
>> updates machines to use all of the drivers we have upstream.
>>
>>  v3: Address review from Rob and Cedric
>>   - Move aspeed-gpio.h usage out into the patches where use of the GPIO
>>     is added
>>   - Clarify that the aspeed-clock.h patch will be merged as part of
>>     the device tree tree. This is to ensure we don't depend on the clk
>>     tree for building.
>
> Arnd, Michael, Stephen; how do we resolve this? We need the
> dt-bindings header to be present for both the clk driver and the
> device tree to build.
>
> The clk driver is not (yet - soon I hope?) merged by Michael and
> Stephen. I am about to commit the device tree changes that will go
> through the ARM SoC tree.

There are several options:

- avoid the use of the header and redefine the binding to have a
  clear mapping between hardware clock lines and the numeric
  representation. This works better for some SoCs than others,
  YMMV.
- Don't use the constants in the dts files for now, but use the
  numbers directly, and update the dts files for the next merge window
- merge only one side for 4.16, either the driver or the dts files,
  and follow up with the other one in 4.17
- make one shared git branch that contains only the headers
  and base both the driver and the dts files on that branch so you
  get a single shared commit ID.

I'm fine with any of the above, please pick whatever suits you best.

       Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 02/20] dt-bindings: gpio: Add ASPEED constants

[Joel Stanley]

These are used to by the device tree to map pin numbers to constants
required by the GPIO bindings.

Signed-off-by: Joel Stanley <joel@jms.id.au>
--
v3:
 - Remove dtsi includes from this patch, they will come later
---
 include/dt-bindings/gpio/aspeed-gpio.h | 49 ++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 include/dt-bindings/gpio/aspeed-gpio.h

diff --git a/include/dt-bindings/gpio/aspeed-gpio.h b/include/dt-bindings/gpio/aspeed-gpio.h
new file mode 100644
index 000000000000..56fc4889b2c4
--- /dev/null
+++ b/include/dt-bindings/gpio/aspeed-gpio.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * This header provides constants for binding aspeed,*-gpio.
+ *
+ * The first cell in Aspeed's GPIO specifier is the GPIO ID. The macros below
+ * provide names for this.
+ *
+ * The second cell contains standard flag values specified in gpio.h.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_ASPEED_GPIO_H
+#define _DT_BINDINGS_GPIO_ASPEED_GPIO_H
+
+#include <dt-bindings/gpio/gpio.h>
+
+#define ASPEED_GPIO_PORT_A 0
+#define ASPEED_GPIO_PORT_B 1
+#define ASPEED_GPIO_PORT_C 2
+#define ASPEED_GPIO_PORT_D 3
+#define ASPEED_GPIO_PORT_E 4
+#define ASPEED_GPIO_PORT_F 5
+#define ASPEED_GPIO_PORT_G 6
+#define ASPEED_GPIO_PORT_H 7
+#define ASPEED_GPIO_PORT_I 8
+#define ASPEED_GPIO_PORT_J 9
+#define ASPEED_GPIO_PORT_K 10
+#define ASPEED_GPIO_PORT_L 11
+#define ASPEED_GPIO_PORT_M 12
+#define ASPEED_GPIO_PORT_N 13
+#define ASPEED_GPIO_PORT_O 14
+#define ASPEED_GPIO_PORT_P 15
+#define ASPEED_GPIO_PORT_Q 16
+#define ASPEED_GPIO_PORT_R 17
+#define ASPEED_GPIO_PORT_S 18
+#define ASPEED_GPIO_PORT_T 19
+#define ASPEED_GPIO_PORT_U 20
+#define ASPEED_GPIO_PORT_V 21
+#define ASPEED_GPIO_PORT_W 22
+#define ASPEED_GPIO_PORT_X 23
+#define ASPEED_GPIO_PORT_Y 24
+#define ASPEED_GPIO_PORT_Z 25
+#define ASPEED_GPIO_PORT_AA 26
+#define ASPEED_GPIO_PORT_AB 27
+#define ASPEED_GPIO_PORT_AC 28
+
+#define ASPEED_GPIO(port, offset) \
+	((ASPEED_GPIO_PORT_##port * 8) + offset)
+
+#endif
-- 
2.15.1

Re: [PATCH v3 02/20] dt-bindings: gpio: Add ASPEED constants

[Rob Herring]

On Wed, Dec 20, 2017 at 01:53:10PM +1030, Joel Stanley wrote:
> These are used to by the device tree to map pin numbers to constants
> required by the GPIO bindings.
> 
> Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
> --
> v3:
>  - Remove dtsi includes from this patch, they will come later
> ---
>  include/dt-bindings/gpio/aspeed-gpio.h | 49 ++++++++++++++++++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 include/dt-bindings/gpio/aspeed-gpio.h

Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 05/20] ARM: dts: aspeed: Add MAC clocks

[Joel Stanley]

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 2 ++
 arch/arm/boot/dts/aspeed-g5.dtsi | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b938759f799e..57194d804051 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -90,6 +90,7 @@
 			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
 			reg = <0x1e660000 0x180>;
 			interrupts = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
 			status = "disabled";
 		};
 
@@ -97,6 +98,7 @@
 			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
 			reg = <0x1e680000 0x180>;
 			interrupts = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 1af600b48475..b6faaef2b1a7 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -124,6 +124,7 @@
 			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
 			reg = <0x1e660000 0x180>;
 			interrupts = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
 			status = "disabled";
 		};
 
@@ -131,6 +132,7 @@
 			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
 			reg = <0x1e680000 0x180>;
 			interrupts = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
 			status = "disabled";
 		};
 
-- 
2.15.1

[PATCH v3 06/20] ARM: dts: aspeed: Add watchdog clocks

[Joel Stanley]

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 2 ++
 arch/arm/boot/dts/aspeed-g5.dtsi | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 57194d804051..2b1bb31ce390 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -177,11 +177,13 @@
 			wdt1: watchdog@1e785000 {
 				compatible = "aspeed,ast2400-wdt";
 				reg = <0x1e785000 0x1c>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 			};
 
 			wdt2: watchdog@1e785020 {
 				compatible = "aspeed,ast2400-wdt";
 				reg = <0x1e785020 0x1c>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 			};
 
 			vuart: serial@1e787000 {
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index b6faaef2b1a7..95bb04e4cee2 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -219,16 +219,19 @@
 			wdt1: watchdog@1e785000 {
 				compatible = "aspeed,ast2500-wdt";
 				reg = <0x1e785000 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 			};
 
 			wdt2: watchdog@1e785020 {
 				compatible = "aspeed,ast2500-wdt";
 				reg = <0x1e785020 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 			};
 
 			wdt3: watchdog@1e785040 {
 				compatible = "aspeed,ast2500-wdt";
 				reg = <0x1e785040 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 				status = "disabled";
 			};
 
-- 
2.15.1

[PATCH v3 07/20] ARM: dts: aspeed: Add flash controller clocks

[Joel Stanley]

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 2 ++
 arch/arm/boot/dts/aspeed-g5.dtsi | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 2b1bb31ce390..36cb66d8cc10 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -55,6 +55,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2400-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
 			status = "disabled";
 			interrupts = <19>;
 			flash@0 {
@@ -70,6 +71,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2400-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
 			status = "disabled";
 			flash@0 {
 				reg = < 0 >;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 95bb04e4cee2..156b345ff20d 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -55,6 +55,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
 			status = "disabled";
 			interrupts = <19>;
 			flash@0 {
@@ -80,6 +81,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
 			status = "disabled";
 			flash@0 {
 				reg = < 0 >;
@@ -99,6 +101,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
 			status = "disabled";
 			flash@0 {
 				reg = < 0 >;
-- 
2.15.1

[PATCH v3 08/20] ARM: dts: aspeed: Add clock phandle to GPIO

[Joel Stanley]

This enables a feature where the driver can debounce inputs.

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 1 +
 arch/arm/boot/dts/aspeed-g5.dtsi | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 36cb66d8cc10..d2a82850b05b 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -144,6 +144,7 @@
 				reg = <0x1e780000 0x1000>;
 				interrupts = <20>;
 				gpio-ranges = <&pinctrl 0 0 220>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 				interrupt-controller;
 			};
 
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 156b345ff20d..3a25fa48d4f6 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -187,6 +187,7 @@
 				reg = <0x1e780000 0x1000>;
 				interrupts = <20>;
 				gpio-ranges = <&pinctrl 0 0 220>;
+				clocks = <&syscon ASPEED_CLK_APB>;
 				interrupt-controller;
 			};
 
-- 
2.15.1

[PATCH v3 09/20] ARM: dts: aspeed: Add PWM and tachometer node

[Joel Stanley]

The PWM/tach unit has a clock and reset phandle. It needs both in order
to function correctly.

Signed-off-by: Joel Stanley <joel@jms.id.au>
--
v3:
 Add the pwm reset phandle
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 10 ++++++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 10 ++++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index d2a82850b05b..91aea96c10c8 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -189,6 +189,16 @@
 				clocks = <&syscon ASPEED_CLK_APB>;
 			};
 
+			pwm_tacho: pwm-tacho-controller@1e786000 {
+				compatible = "aspeed,ast2400-pwm-tacho";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1e786000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				resets = <&syscon ASPEED_RESET_PWM>;
+				status = "disabled";
+			};
+
 			vuart: serial@1e787000 {
 				compatible = "aspeed,ast2400-vuart";
 				reg = <0x1e787000 0x40>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 3a25fa48d4f6..af3869ec87bb 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -239,6 +239,16 @@
 				status = "disabled";
 			};
 
+			pwm_tacho: pwm-tacho-controller@1e786000 {
+				compatible = "aspeed,ast2500-pwm-tacho";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1e786000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				resets = <&syscon ASPEED_RESET_PWM>;
+				status = "disabled";
+			};
+
 			vuart: serial@1e787000 {
 				compatible = "aspeed,ast2500-vuart";
 				reg = <0x1e787000 0x40>;
-- 
2.15.1

[PATCH v3 10/20] ARM: dts: aspeed: Add LPC Snoop device

[Joel Stanley]

LPC snoop hardware on the ASPEED BMC, used for monitoring
host I/O port activity.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 7 +++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 6 ++++++
 2 files changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 91aea96c10c8..e8a61fc3956d 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -237,6 +237,13 @@
 						status = "disabled";
 					};
 
+					lpc_snoop: lpc-snoop@0 {
+						compatible = "aspeed,ast2400-lpc-snoop";
+						reg = <0x0 0x80>;
+						interrupts = <8>;
+						status = "disabled";
+					};
+
 					lhc: lhc@20 {
 						compatible = "aspeed,ast2400-lhc";
 						reg = <0x20 0x24 0x48 0x8>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index af3869ec87bb..d558091aa92b 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -288,6 +288,12 @@
 						status = "disabled";
 					};
 
+					lpc_snoop: lpc-snoop@0 {
+						compatible = "aspeed,ast2500-lpc-snoop";
+						reg = <0x0 0x80>;
+						interrupts = <8>;
+						status = "disabled";
+					};
 
 					lhc: lhc@20 {
 						compatible = "aspeed,ast2500-lhc";
-- 
2.15.1

[PATCH v3 11/20] ARM: dts: aspeed: Remove skeleton.dtsi

[Joel Stanley]

We don't require it for any of the ASPEED systems.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 1 -
 arch/arm/boot/dts/aspeed-g5.dtsi | 1 -
 2 files changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index e8a61fc3956d..1186fe55e2d8 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,5 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/aspeed-clock.h>
 
 / {
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index d558091aa92b..6043876ad85f 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/aspeed-clock.h>
 
 / {
-- 
2.15.1

[PATCH v3 12/20] ARM: dts: aspeed: Update license headers

[Joel Stanley]

In b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier
to files with no license") these files had the GPL-2.0 licence added
automatically. Update them to be GPL 2.0+ in line with other IBM kernel
contributions.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/boot/dts/aspeed-ast2500-evb.dts      | 2 +-
 arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 2 +-
 arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts  | 2 +-
 arch/arm/boot/dts/aspeed-g4.dtsi              | 2 +-
 arch/arm/boot/dts/aspeed-g5.dtsi              | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 602bc10fdaf4..3e6f38e5d5d0 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
 /dts-v1/;
 
 #include "aspeed-g5.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index c786bc2f2919..a8f0c046e83e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
 /dts-v1/;
 
 #include "aspeed-g4.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 8067793129ea..a7a9386f964d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
 /dts-v1/;
 
 #include "aspeed-g5.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 1186fe55e2d8..b0d8431a3700 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
 #include <dt-bindings/clock/aspeed-clock.h>
 
 / {
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 6043876ad85f..40de3b66c33f 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0+
 #include <dt-bindings/clock/aspeed-clock.h>
 
 / {
-- 
2.15.1

[PATCH v3 13/20] ARM: dts: Add OpenBMC flash layout

[Joel Stanley]

This is a layout used by OpenBMC systems. It describes the fixed flash
layout of a 32MB mtd device.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v3:
  - Remove leading zeros to fix warning
---
 arch/arm/boot/dts/openbmc-flash-layout.dtsi | 32 +++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 arch/arm/boot/dts/openbmc-flash-layout.dtsi

diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
new file mode 100644
index 000000000000..6c26524e93e1
--- /dev/null
+++ b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0x60000>;
+		label = "u-boot";
+	};
+
+	u-boot-env@60000 {
+		reg = <0x60000 0x20000>;
+		label = "u-boot-env";
+	};
+
+	kernel@80000 {
+		reg = <0x80000 0x440000>;
+		label = "kernel";
+	};
+
+	rofs@c0000 {
+		reg = <0x4c0000 0x1740000>;
+		label = "rofs";
+	};
+
+	rwfs@1c00000 {
+		reg = <0x1c00000 0x400000>;
+		label = "rwfs";
+	};
+};
-- 
2.15.1

[PATCH v3 14/20] ARM: dts: aspeed: Sort ASPEED entries in makefile

[Joel Stanley]

In preperation for adding more boards.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/boot/dts/Makefile | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9caf21..5d1e9d37bf3a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1101,7 +1101,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
 dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
-dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
-	aspeed-bmc-opp-romulus.dtb \
-	aspeed-ast2500-evb.dtb
+dtb-$(CONFIG_ARCH_ASPEED) += \
+	aspeed-ast2500-evb.dtb \
+	aspeed-bmc-opp-palmetto.dtb \
+	aspeed-bmc-opp-romulus.dtb
 endif
-- 
2.15.1

[PATCH v3 15/20] ARM: dts: aspeed: Add Witherspoon BMC machine

[Joel Stanley]

The Witherspoon BMC is an ASPEED ast2500 based BMC that is part of an
OpenPower Power9 server.

This adds the device tree description for most upstream components. It
is a squashed commit from the OpenBMC kernel tree.

Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 v2:
  - Add Brandon's reviewed-by tag
 v3:
  - Add GPIO include
  - Add unit name for memory node to fix warning
---
 arch/arm/boot/dts/Makefile                       |   4 +-
 arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts | 548 +++++++++++++++++++++++
 2 files changed, 551 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5d1e9d37bf3a..15a9207319c1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1104,5 +1104,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
 dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-ast2500-evb.dtb \
 	aspeed-bmc-opp-palmetto.dtb \
-	aspeed-bmc-opp-romulus.dtb
+	aspeed-bmc-opp-romulus.dtb \
+	aspeed-bmc-opp-witherspoon.dtb
+
 endif
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
new file mode 100644
index 000000000000..5f9049d2c4c3
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Witherspoon BMC";
+	compatible = "ibm,witherspoon-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		front-power {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rear-fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-id {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-power {
+			gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+	iio-hwmon-bmp280 {
+		compatible = "iio-hwmon";
+		io-channels = <&bmp 1>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		label = "alt";
+		m25p,fast-read;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* MUX ->
+	 *    Samtec 1
+	 *    Samtec 2
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	/* MUX
+	 *   -> PCIe Slot 3
+	 *   -> PCIe Slot 4
+	 */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
-- 
2.15.1

[PATCH v3 16/20] ARM: dts: aspeed: Add Ingrasys Zaius BMC machine

[Joel Stanley]

From: Xo Wang <xow@google.com>

Zaius is a POWER9 platform announced at OpenPOWER Summit 2016. This adds
basic DTS support for its AST2500 BMC.

This adds the device tree description for most upstream components. It
is a squashed commit of all of the patches from the OpenBMC kernel tree.

Signed-off-by: Xo Wang <xow@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Robert Lippert <rlippert@google.com>
Signed-off-by: Peter Hanson <peterh@google.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Rick Altherr <raltherr@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 v3:
  - Add GPIO include
  - Add unit name for memory node to fix warning
---
 arch/arm/boot/dts/Makefile                 |   4 +-
 arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 426 +++++++++++++++++++++++++++++
 2 files changed, 428 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 15a9207319c1..48c55f307aa9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1105,6 +1105,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-ast2500-evb.dtb \
 	aspeed-bmc-opp-palmetto.dtb \
 	aspeed-bmc-opp-romulus.dtb \
-	aspeed-bmc-opp-witherspoon.dtb
-
+	aspeed-bmc-opp-witherspoon.dtb \
+	aspeed-bmc-opp-zaius.dtb
 endif
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
new file mode 100644
index 000000000000..c881484a85cf
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Zaius BMC";
+	compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+	};
+
+	onewire0 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire1 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire2 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire3 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_boot_status {
+			label = "System boot status";
+			gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		attention {
+			label = "Attention";
+			gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		plt_fault {
+			label = "Platform fault";
+			gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		hdd_fault {
+			label = "Onboard drive fault";
+			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+		     &pinctrl_spi2cs0_default
+		     &pinctrl_spi2cs1_default
+		     &pinctrl_spi2miso_default
+		     &pinctrl_spi2mosi_default>;
+
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+
+	/* Power sequencer UCD90160 PMBUS @64h
+	 * FRU AT24C64D @50h
+	 * RTC PCF8523 @68h
+	 * Clock buffer 9DBL04 @6dh
+	 */
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	/* MUX1 PCA9546A @71h
+	 *   PCIe 0
+	 *   PCIe 1
+	 *   PCIe 2
+	 *   TPM header
+	 */
+};
+
+&i2c2 {
+	status = "disabled";
+
+	/* OCP Mezz Connector A (OOB SMBUS) */
+};
+
+&i2c3 {
+	status = "disabled";
+
+	/* OCP Mezz Connector A (PCIe slot SMBUS) */
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	/* MUX1 PCA9546A @71h
+	 *   PCIe 3
+	 *   PCIe 4
+	 */
+};
+
+
+&i2c5 {
+	status = "disabled";
+
+	/* CPU0 PRM 0.7V */
+	/* CPU0 PRM 1.2V CH03 */
+	/* CPU0 PRM 0.8V */
+	/* CPU0 PRM 1.2V CH47 */
+};
+
+&i2c6 {
+	status = "disabled";
+
+	/* CPU1 PRM 0.7V */
+	/* CPU1 PRM 1.2V CH03 */
+	/* CPU1 PRM 0.8V */
+	/* CPU1 PRM 1.2V CH47 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	pca9541a@70 {
+		compatible = "nxp,pca9541";
+		reg = <0x70>;
+
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hotswap@54 {
+				compatible = "ti,lm5066i";
+				reg = <0x54>;
+			};
+		};
+	};
+
+	/* Master selector PCA9541A @70h (other master: CPU0)
+	 *   LM5066I PMBUS @10h
+	 */
+
+	/* 12V Quarter Brick DC/DC Converter Q54SJ12050 @61h */
+	power-brick@61 {
+		compatible = "delta,dps800";
+		reg = <0x61>;
+	};
+
+	/* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+	/* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
+	/* CPU0 VR ISL68137 0.8V PMBUS @60h */
+	/* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @41h */
+	/* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @65h */
+	/* CPU1 VR ISL68137 1.2V CH03 PMBUS @44h */
+	/* CPU1 VR ISL68137 0.8V PMBUS @61h */
+	/* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
+	/* CPU0 VR ISL68137 1.2V CH47 PMBUS @45h */
+};
+
+
+&i2c9 {
+	status = "disabled";
+
+	/* Fan board */
+};
+
+&i2c10 {
+	status = "disabled";
+};
+
+&i2c11 {
+	status = "disabled";
+
+	/* GPU sideband */
+};
+
+&i2c12 {
+	status = "disabled";
+};
+
+&i2c13 {
+	status = "disabled";
+
+	/* MUX PI3USB102
+	 *   CPU0 debug
+	 *   CPU1 debug
+	 */
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+
+	pinctrl_gpioh_unbiased: gpioi_unbiased {
+		pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
+		bias-disable;
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpioh_unbiased>;
+
+	line_iso_u146_en {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "iso_u164_en";
+	};
+
+	ncsi_mux_en_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "ncsi_mux_en_n";
+	};
+
+	line_bmc_i2c2_sw_rst_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "bmc_i2c2_sw_rst_n";
+	};
+
+	line_bmc_i2c5_sw_rst_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "bmc_i2c5_sw_rst_n";
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+};
-- 
2.15.1

[PATCH v3 17/20] ARM: dts: aspeed: Add Qanta Q71L BMC machine

[Joel Stanley]

From: Rick Altherr <raltherr@google.com>

The Qanta Q71L BMC is an ASPEED ast2400 based BMC that is part of a
Qanta x86 server.

This adds the device tree description for most upstream components. It
is a squashed commit from the OpenBMC kernel tree.

Signed-off-by: Peter Hanson <peterh@google.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Rick Altherr <raltherr@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 v3:
  - Add GPIO include
  - Add unit name to memory node to fix warning
---
 arch/arm/boot/dts/Makefile                   |   3 +-
 arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts | 458 +++++++++++++++++++++++++++
 2 files changed, 460 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 48c55f307aa9..5ab5d9169511 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1106,5 +1106,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-opp-palmetto.dtb \
 	aspeed-bmc-opp-romulus.dtb \
 	aspeed-bmc-opp-witherspoon.dtb \
-	aspeed-bmc-opp-zaius.dtb
+	aspeed-bmc-opp-zaius.dtb \
+	aspeed-bmc-quanta-q71l.dtb
 endif
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
new file mode 100644
index 000000000000..76aa6ea1f988
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Quanta Q71L BMC";
+	compatible = "quanta,q71l-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x8000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@47800000 {
+			no-map;
+			reg = <0x47800000 0x00800000>; /* 8MB */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 11>;
+	};
+
+	i2c1mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* mux-gpios = <&sgpio 10 GPIO_ACTIVE_HIGH> */
+		i2c-parent = <&i2c1>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default
+			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* temp2 inlet */
+	tmp75@4c {
+		compatible = "ti,tmp75";
+		reg = <0x4c>;
+	};
+
+	/* temp3 */
+	tmp75@4e {
+		compatible = "ti,tmp75";
+		reg = <0x4e>;
+	};
+
+	/* temp1 */
+	tmp75@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	/* Baseboard FRU */
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+
+	/* FP FRU */
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* 0: PCIe Slot 2,
+	 *    Slot 3,
+	 *    Slot 6,
+	 *    Slot 7
+	 */
+	i2c-switch@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;  /* may use mux@77 next. */
+
+		i2c_pcie2: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie3: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_pcie6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_pcie7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	/* 0: PCIe Slot 1,
+	 *    Slot 4,
+	 *    Slot 5,
+	 *    Slot 8,
+	 *    Slot 9,
+	 *    Slot 10,
+	 *    SSD 1,
+	 *    SSD 2
+	 */
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;  /* may use mux@74 next. */
+
+		i2c_pcie1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_pcie5: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_pcie8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c_pcie9: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c_pcie10: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c_ssd1: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c_ssd2: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* BIOS FRU */
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* 0: PSU4
+	 *    PSU1
+	 *    PSU3
+	 *    PSU2
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c_psu4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_psu1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_psu3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_psu2: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	/* PDB FRU */
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* BMC FRU */
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c1mux {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Memory Riser 1 FRU */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+		};
+
+		/* Memory Riser 2 FRU */
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+		};
+
+		/* Memory Riser 3 FRU */
+		eeprom@52 {
+			compatible = "atmel,24c02";
+			reg = <0x52>;
+		};
+
+		/* Memory Riser 4 FRU */
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+		};
+	};
+
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Memory Riser 5 FRU */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+		};
+
+		/* Memory Riser 6 FRU */
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+		};
+
+		/* Memory Riser 7 FRU */
+		eeprom@52 {
+			compatible = "atmel,24c02";
+			reg = <0x52>;
+		};
+
+		/* Memory Riser 8 FRU */
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+		};
+	};
+};
-- 
2.15.1

[PATCH v3 18/20] ARM: dts: aspeed-romulus: Update Romulus system

[Joel Stanley]

 - Fix incorrect RAM size
 - Remove alias; these are now specified in the dtsi
 - Add newly upstreamed devices
 - Include OpenBMC flash layout

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 v3:
  - Add GPIO include
  - Fix duplicate fmc and spi nodes
  - Add unit name for memory node to fix warning
---
 arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 133 +++++++++++++++++++++++++--
 1 file changed, 126 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index a7a9386f964d..623b6ab42021 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -1,23 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0+
 /dts-v1/;
-
 #include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
 
 / {
 	model = "Romulus BMC";
 	compatible = "ibm,romulus-bmc", "aspeed,ast2500";
 
-	aliases {
-		serial4 = &uart5;
-	};
-
 	chosen {
 		stdout-path = &uart5;
 		bootargs = "console=ttyS4,115200 earlyprintk";
 	};
 
-	memory {
-		reg = <0x80000000 0x40000000>;
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
 	};
 
 	reserved-memory {
@@ -29,6 +25,49 @@
 			no-map;
 			reg = <0xbf000000 0x01000000>; /* 16M */
 		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
 	};
 };
 
@@ -38,6 +77,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
 	};
 };
 
@@ -53,6 +93,12 @@
 	};
 };
 
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
 &uart1 {
 	/* Rear RS-232 connector */
 	status = "okay";
@@ -81,6 +127,10 @@
 	pinctrl-0 = <&pinctrl_rmii1_default>;
 };
 
+&i2c1 {
+	status = "okay";
+};
+
 &i2c2 {
 	status = "okay";
 };
@@ -133,8 +183,77 @@
 
 &i2c12 {
 	status = "okay";
+
+	max31785@52 {
+		compatible = "maxim,max31785";
+		reg = <0x52>;
+	};
+};
+
+&gpio {
+	nic_func_mode0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "nic_func_mode0";
+	};
+	nic_func_mode1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "nic_func_mode1";
+	};
 };
 
 &vuart {
 	status = "okay";
 };
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+};
-- 
2.15.1

Re: [PATCH v3 18/20] ARM: dts: aspeed-romulus: Update Romulus system

[Cédric Le Goater]

On 12/20/2017 04:23 AM, Joel Stanley wrote:
>  - Fix incorrect RAM size
>  - Remove alias; these are now specified in the dtsi
>  - Add newly upstreamed devices
>  - Include OpenBMC flash layout
> 
> Signed-off-by: Joel Stanley <joel@jms.id.au>

Reviewed-by: Cédric Le Goater <clg@kaod.org>

> ---
>  v3:
>   - Add GPIO include
>   - Fix duplicate fmc and spi nodes
>   - Add unit name for memory node to fix warning
> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 133 +++++++++++++++++++++++++--
>  1 file changed, 126 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> index a7a9386f964d..623b6ab42021 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> @@ -1,23 +1,19 @@
>  // SPDX-License-Identifier: GPL-2.0+
>  /dts-v1/;
> -
>  #include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
>  
>  / {
>  	model = "Romulus BMC";
>  	compatible = "ibm,romulus-bmc", "aspeed,ast2500";
>  
> -	aliases {
> -		serial4 = &uart5;
> -	};
> -
>  	chosen {
>  		stdout-path = &uart5;
>  		bootargs = "console=ttyS4,115200 earlyprintk";
>  	};
>  
> -	memory {
> -		reg = <0x80000000 0x40000000>;
> +	memory@80000000 {
> +		reg = <0x80000000 0x20000000>;
>  	};
>  
>  	reserved-memory {
> @@ -29,6 +25,49 @@
>  			no-map;
>  			reg = <0xbf000000 0x01000000>; /* 16M */
>  		};
> +
> +		flash_memory: region@98000000 {
> +			no-map;
> +			reg = <0x98000000 0x04000000>; /* 64M */
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		fault {
> +			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
> +		};
> +
> +		identify {
> +			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		power {
> +			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> +	fsi: gpio-fsi {
> +		compatible = "fsi-master-gpio", "fsi-master";
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
> +		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
> +		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
> +		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
> +		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		checkstop {
> +			label = "checkstop";
> +			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
> +			linux,code = <ASPEED_GPIO(J, 2)>;
> +		};
>  	};
>  };
>  
> @@ -38,6 +77,7 @@
>  		status = "okay";
>  		m25p,fast-read;
>  		label = "bmc";
> +#include "openbmc-flash-layout.dtsi"
>  	};
>  };
>  
> @@ -53,6 +93,12 @@
>  	};
>  };
>  
> +&lpc_ctrl {
> +	status = "okay";
> +	memory-region = <&flash_memory>;
> +	flash = <&spi1>;
> +};
> +
>  &uart1 {
>  	/* Rear RS-232 connector */
>  	status = "okay";
> @@ -81,6 +127,10 @@
>  	pinctrl-0 = <&pinctrl_rmii1_default>;
>  };
>  
> +&i2c1 {
> +	status = "okay";
> +};
> +
>  &i2c2 {
>  	status = "okay";
>  };
> @@ -133,8 +183,77 @@
>  
>  &i2c12 {
>  	status = "okay";
> +
> +	max31785@52 {
> +		compatible = "maxim,max31785";
> +		reg = <0x52>;
> +	};
> +};
> +
> +&gpio {
> +	nic_func_mode0 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
> +		output-low;
> +		line-name = "nic_func_mode0";
> +	};
> +	nic_func_mode1 {
> +		gpio-hog;
> +		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
> +		output-low;
> +		line-name = "nic_func_mode1";
> +	};
>  };
>  
>  &vuart {
>  	status = "okay";
>  };
> +
> +&gfx {
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	aspeed,external-nodes = <&gfx &lhc>;
> +};
> +
> +&pwm_tacho {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
> +
> +	fan@0 {
> +		reg = <0x00>;
> +		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
> +	};
> +
> +	fan@1 {
> +		reg = <0x00>;
> +		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
> +	};
> +
> +	fan@2 {
> +		reg = <0x01>;
> +		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
> +	};
> +
> +	fan@3 {
> +		reg = <0x01>;
> +		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
> +	};
> +
> +	fan@4 {
> +		reg = <0x00>;
> +		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
> +	};
> +
> +	fan@5 {
> +		reg = <0x00>;
> +		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
> +	};
> +
> +	fan@6 {
> +		reg = <0x01>;
> +		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
> +	};
> +};
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel