[PATCH v4 0/3] usb: renesas_usbhs: Add RZ/A1 support

[PATCH v4 0/3] usb: renesas_usbhs: Add RZ/A1 support

[Chris Brandt]

This series adds RZ/A1 gadget support to the renesas_usbhs driver.
Basically, it's almost the same HW as the R-Car (and SH) parts.
The only real difference is the some extra registers for the PHY.

This was tested on an RSK board by connecting to a PC as an
Ethernet CDC gadget.

v4:
 * Re-added "renesas,usbhs-r7s72100" to doc
 * Changed to "renesas,usbhs-r7s72100", "renesas,rza1-usbhs" for DTS
v3:
 * Changed from "renesas,usbhs-r7s72100" to "renesas,rza1-usbhs"
 * Removed "renesas,usbhs-r7s72100"
 * Changed License of rza.c
v2:
 * Node name is now generic 'usb@'
 * GIC_SPI (73-32) is now just GIC_SPI 41
 * All hex number are lower case
 * Added Reviewed-by


Chris Brandt (3):
  usb: renesas_usbhs: Add support for RZ/A1
  dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
  ARM: dts: r7s72100: add USB device to device tree

 .../devicetree/bindings/usb/renesas_usbhs.txt      |  2 +
 arch/arm/boot/dts/r7s72100.dtsi                    | 20 +++++++++
 drivers/usb/renesas_usbhs/Makefile                 |  2 +-
 drivers/usb/renesas_usbhs/common.c                 | 13 ++++++
 drivers/usb/renesas_usbhs/common.h                 |  6 +++
 drivers/usb/renesas_usbhs/rza.c                    | 52 ++++++++++++++++++++++
 drivers/usb/renesas_usbhs/rza.h                    |  4 ++
 include/linux/usb/renesas_usbhs.h                  |  1 +
 8 files changed, 99 insertions(+), 1 deletion(-)
 create mode 100644 drivers/usb/renesas_usbhs/rza.c
 create mode 100644 drivers/usb/renesas_usbhs/rza.h

-- 
2.15.1


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 1/3] usb: renesas_usbhs: Add support for RZ/A1

[Chris Brandt]

This patch adds the capability to support RZ/A1 SoCs.

Signed-off-by: Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
---
v2:
 * Removed "renesas,usbhs-r7s72100"
 * Changed license of rza.c
---
 drivers/usb/renesas_usbhs/Makefile |  2 +-
 drivers/usb/renesas_usbhs/common.c | 13 ++++++++++
 drivers/usb/renesas_usbhs/common.h |  6 +++++
 drivers/usb/renesas_usbhs/rza.c    | 52 ++++++++++++++++++++++++++++++++++++++
 drivers/usb/renesas_usbhs/rza.h    |  4 +++
 include/linux/usb/renesas_usbhs.h  |  1 +
 6 files changed, 77 insertions(+), 1 deletion(-)
 create mode 100644 drivers/usb/renesas_usbhs/rza.c
 create mode 100644 drivers/usb/renesas_usbhs/rza.h

diff --git a/drivers/usb/renesas_usbhs/Makefile b/drivers/usb/renesas_usbhs/Makefile
index fac147a3ad23..5c5b51bb48ef 100644
--- a/drivers/usb/renesas_usbhs/Makefile
+++ b/drivers/usb/renesas_usbhs/Makefile
@@ -5,7 +5,7 @@
 
 obj-$(CONFIG_USB_RENESAS_USBHS)	+= renesas_usbhs.o
 
-renesas_usbhs-y			:= common.o mod.o pipe.o fifo.o rcar2.o rcar3.o
+renesas_usbhs-y			:= common.o mod.o pipe.o fifo.o rcar2.o rcar3.o rza.o
 
 ifneq ($(CONFIG_USB_RENESAS_USBHS_HCD),)
 	renesas_usbhs-y		+= mod_host.o
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index c5289b3ecf8d..4310df46639d 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -17,6 +17,7 @@
 #include "common.h"
 #include "rcar2.h"
 #include "rcar3.h"
+#include "rza.h"
 
 /*
  *		image of renesas_usbhs
@@ -488,6 +489,10 @@ static const struct of_device_id usbhs_of_match[] = {
 		.compatible = "renesas,rcar-gen3-usbhs",
 		.data = (void *)USBHS_TYPE_RCAR_GEN3,
 	},
+	{
+		.compatible = "renesas,rza1-usbhs",
+		.data = (void *)USBHS_TYPE_RZA1,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, usbhs_of_match);
@@ -520,6 +525,11 @@ static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
 		dparam->pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
 	}
 
+	if (dparam->type == USBHS_TYPE_RZA1) {
+		dparam->pipe_configs = usbhsc_new_pipe;
+		dparam->pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
+	}
+
 	return info;
 }
 
@@ -591,6 +601,9 @@ static int usbhs_probe(struct platform_device *pdev)
 				dev_err(&pdev->dev, "no notifier registered\n");
 		}
 		break;
+	case USBHS_TYPE_RZA1:
+		priv->pfunc = usbhs_rza1_ops;
+		break;
 	default:
 		if (!info->platform_callback.get_id) {
 			dev_err(&pdev->dev, "no platform callbacks");
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index c9747f064601..f619afeae2b8 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -98,6 +98,7 @@ struct usbhs_priv;
 #define D2FIFOCTR	0x00F2	/* for R-Car Gen2 */
 #define D3FIFOSEL	0x00F4	/* for R-Car Gen2 */
 #define D3FIFOCTR	0x00F6	/* for R-Car Gen2 */
+#define SUSPMODE	0x0102	/* for RZ/A */
 
 /* SYSCFG */
 #define SCKE	(1 << 10)	/* USB Module Clock Enable */
@@ -106,6 +107,8 @@ struct usbhs_priv;
 #define DRPD	(1 << 5)	/* D+ Line/D- Line Resistance Control */
 #define DPRPU	(1 << 4)	/* D+ Line Resistance Control */
 #define USBE	(1 << 0)	/* USB Module Operation Enable */
+#define UCKSEL	(1 << 2)	/* Clock Select for RZ/A1 */
+#define UPLLE	(1 << 1)	/* USB PLL Enable for RZ/A1 */
 
 /* DVSTCTR */
 #define EXTLP	(1 << 10)	/* Controls the EXTLP pin output state */
@@ -233,6 +236,9 @@ struct usbhs_priv;
 #define USBSPD_SPEED_FULL	0x2
 #define USBSPD_SPEED_HIGH	0x3
 
+/* SUSPMODE */
+#define SUSPM		(1 << 14)	/* SuspendM Control */
+
 /*
  *		struct
  */
diff --git a/drivers/usb/renesas_usbhs/rza.c b/drivers/usb/renesas_usbhs/rza.c
new file mode 100644
index 000000000000..5b287257ec11
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/rza.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas USB driver RZ/A initialization and power control
+ *
+ * Copyright (C) 2018 Chris Brandt
+ * Copyright (C) 2018 Renesas Electronics Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include "common.h"
+#include "rza.h"
+
+static int usbhs_rza1_hardware_init(struct platform_device *pdev)
+{
+	struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
+	struct device_node *usb_x1_clk, *extal_clk;
+	u32 freq_usb = 0, freq_extal = 0;
+
+	/* Input Clock Selection (NOTE: ch0 controls both ch0 and ch1) */
+	usb_x1_clk = of_find_node_by_name(NULL, "usb_x1");
+	extal_clk = of_find_node_by_name(NULL, "extal");
+	of_property_read_u32(usb_x1_clk, "clock-frequency", &freq_usb);
+	of_property_read_u32(extal_clk, "clock-frequency", &freq_extal);
+	if (freq_usb == 0) {
+		if (freq_extal == 12000000) {
+			/* Select 12MHz XTAL */
+			usbhs_bset(priv, SYSCFG, UCKSEL, UCKSEL);
+		} else {
+			dev_err(usbhs_priv_to_dev(priv), "A 48MHz USB clock or 12MHz main clock is required.\n");
+			return -EIO;
+		}
+	}
+
+	/* Enable USB PLL (NOTE: ch0 controls both ch0 and ch1) */
+	usbhs_bset(priv, SYSCFG, UPLLE, UPLLE);
+	udelay(1000);
+	usbhs_bset(priv, SUSPMODE, SUSPM, SUSPM);
+
+	return 0;
+}
+
+static int usbhs_rza_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+const struct renesas_usbhs_platform_callback usbhs_rza1_ops = {
+	.hardware_init = usbhs_rza1_hardware_init,
+	.get_id = usbhs_rza_get_id,
+};
diff --git a/drivers/usb/renesas_usbhs/rza.h b/drivers/usb/renesas_usbhs/rza.h
new file mode 100644
index 000000000000..ca917ca54f6d
--- /dev/null
+++ b/drivers/usb/renesas_usbhs/rza.h
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "common.h"
+
+extern const struct renesas_usbhs_platform_callback usbhs_rza1_ops;
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index 9482735d4ca5..53924f8e840c 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -195,6 +195,7 @@ struct renesas_usbhs_driver_param {
 #define USBHS_TYPE_RCAR_GEN2		1
 #define USBHS_TYPE_RCAR_GEN3		2
 #define USBHS_TYPE_RCAR_GEN3_WITH_PLL	3
+#define USBHS_TYPE_RZA1			4
 
 /*
  * option:
-- 
2.15.1


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1

[Chris Brandt]

Document support for RZ/A1 SoCs

Signed-off-by: Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
v4:
 * Re-added "renesas,usbhs-r7s72100"
v3:
 * Removed "renesas,usbhs-r7s72100"
v2:
 * Added Reviewed-by
---
 Documentation/devicetree/bindings/usb/renesas_usbhs.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index 47394ab788e3..d060172f1529 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -13,8 +13,10 @@ Required properties:
 	- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
 	- "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device
 	- "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device
+	- "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device
 	- "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices
 	- "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device
+	- "renesas,rza1-usbhs" for RZ/A1 compatible device
 
 	When compatible with the generic version, nodes must list the
 	SoC-specific version corresponding to the platform first followed
-- 
2.15.1


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v4 3/3] ARM: dts: r7s72100: add USB device to device tree

[Chris Brandt]

Add USB device support.

Signed-off-by: Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
v4:
 * Changed to "renesas,usbhs-r7s72100", "renesas,rza1-usbhs"
v3:
 * Changed from "renesas,usbhs-r7s72100" to "renesas,rza1-usbhs"
v2:
 * Node name is now generic 'usb@'
 * GIC_SPI (73-32) is now just GIC_SPI 41
 * All hex number are lower case
 * Added Reviewed-by
---
 arch/arm/boot/dts/r7s72100.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index ab9645a42eca..bd6366d1800b 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -667,4 +667,24 @@
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
+
+	usbhs0: usb@e8010000 {
+		compatible = "renesas,usbhs-r7s72100", "renesas,rza1-usbhs";
+		reg = <0xe8010000 0x1a0>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R7S72100_CLK_USB0>;
+		renesas,buswait = <4>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	usbhs1: usb@e8207000 {
+		compatible = "renesas,usbhs-r7s72100", "renesas,rza1-usbhs";
+		reg = <0xe8207000 0x1a0>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R7S72100_CLK_USB1>;
+		renesas,buswait = <4>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
 };
-- 
2.15.1


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1

[Simon Horman]

On Mon, Jan 08, 2018 at 07:30:54AM -0500, Chris Brandt wrote:
> Document support for RZ/A1 SoCs
> 
> Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

> ---
> v4:
>  * Re-added "renesas,usbhs-r7s72100"
> v3:
>  * Removed "renesas,usbhs-r7s72100"
> v2:
>  * Added Reviewed-by
> ---
>  Documentation/devicetree/bindings/usb/renesas_usbhs.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
> index 47394ab788e3..d060172f1529 100644
> --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
> +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
> @@ -13,8 +13,10 @@ Required properties:
>  	- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
>  	- "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device
>  	- "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device
> +	- "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device
>  	- "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices
>  	- "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device
> +	- "renesas,rza1-usbhs" for RZ/A1 compatible device
>  
>  	When compatible with the generic version, nodes must list the
>  	SoC-specific version corresponding to the platform first followed
> -- 
> 2.15.1
> 
> 

RE: [PATCH v4 1/3] usb: renesas_usbhs: Add support for RZ/A1

[Yoshihiro Shimoda]

Hi Chris-san,

> From: Chris Brandt, Sent: Monday, January 8, 2018 9:31 PM
> 
> This patch adds the capability to support RZ/A1 SoCs.
> 
> Signed-off-by: Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>

Thank you for the patch!

Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>

Best regards,
Yoshihiro Shimoda

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH v4 1/3] usb: renesas_usbhs: Add support for RZ/A1

[Yoshihiro Shimoda]

+Felipe

> -----Original Message-----
> From: Yoshihiro Shimoda, Sent: Wednesday, January 10, 2018 5:27 PM
> 
> Hi Chris-san,
> 
> > From: Chris Brandt, Sent: Monday, January 8, 2018 9:31 PM
> >
> > This patch adds the capability to support RZ/A1 SoCs.
> >
> > Signed-off-by: Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> 
> Thank you for the patch!
> 
> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> 
> Best regards,
> Yoshihiro Shimoda

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH v4 2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1

[Yoshihiro Shimoda]

Hi Chris-san,
(And I added Felipe's email as To)

> From: Chris Brandt, Sent: Monday, January 8, 2018 9:31 PM
> 
> Document support for RZ/A1 SoCs
> 
> Signed-off-by: Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
> ---

Thank you for the patch!

Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>

Best regards,
Yoshihiro Shimoda

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v4 2/3] dt-bindings: usb: renesas_usbhs: Add support for RZ/A1

[Rob Herring]

On Mon, Jan 08, 2018 at 07:30:54AM -0500, Chris Brandt wrote:
> Document support for RZ/A1 SoCs
> 
> Signed-off-by: Chris Brandt <chris.brandt-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
> Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
> ---
> v4:
>  * Re-added "renesas,usbhs-r7s72100"
> v3:
>  * Removed "renesas,usbhs-r7s72100"
> v2:
>  * Added Reviewed-by
> ---
>  Documentation/devicetree/bindings/usb/renesas_usbhs.txt | 2 ++
>  1 file changed, 2 insertions(+)

Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html