* [PATCH v1] arm: dts: ls1021a: Add configure-gfladj property to USB3 node
@ 2018-01-22 8:44 yinbo.zhu
0 siblings, 0 replies; only message in thread
From: yinbo.zhu @ 2018-01-22 8:44 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Russell King
Cc: xiaobo.xie, jerry.huang, ran.wang_1,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM PORT, open list, yinbo . zhu
From: yinbo.zhu <yinbo.zhu@nxp.com>
Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustent is required
or not
Signed-off-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
---
arch/arm/boot/dts/ls1021a.dtsi | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index f81fad2..a5ccf7a 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -707,6 +707,7 @@
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
+ configure-gfladj;
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
};
--
1.7.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2018-01-22 8:44 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-22 8:44 [PATCH v1] arm: dts: ls1021a: Add configure-gfladj property to USB3 node yinbo.zhu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).