Re: [PATCHv1] dt-bindings: misc: add Intel Stratix10 service layer binding

[Rob Herring <robh@kernel.org>]

On Tue, Jan 23, 2018 at 01:25:02PM -0600, richard.gong@linux.intel.com wrote:
> From: Richard Gong <richard.gong@intel.com>
> 
> Add a device tree binding for the Intel Stratix10 service layer driver
> 
> Signed-off-by: Richard Gong <richard.gong@intel.com>
> ---
>  .../devicetree/bindings/misc/intel-service.txt     | 56 ++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/misc/intel-service.txt
> 
> diff --git a/Documentation/devicetree/bindings/misc/intel-service.txt b/Documentation/devicetree/bindings/misc/intel-service.txt
> new file mode 100644
> index 0000000..254e4a1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/misc/intel-service.txt
> @@ -0,0 +1,56 @@
> +Intel Service Layer Driver for Stratix10 SoC
> +============================================
> +Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard
> +processor system (HPS) and Secure Device Manager (SDM). When the FPGA is
> +configured from HPS, there needs to be a way for HPS to notify SDM the
> +location and size of the configuration data. Then SDM will get the
> +configuration data from that location and perform the FPGA configuration.
> +
> +To meet the whole system security needs and support virtual machine requesting
> +communication with SDM, only the secure world of software (EL3, Exception
> +Layer 3) can interface with SDM. All software entities running on other
> +exception layers must channel through the EL3 software whenever it needs
> +service from SDM.
> +
> +Intel Stratix10 service layer driver, running at privileged exception level
> +(EL1, Exception Layer 1), interfaces with the service providers and provides
> +the services for FPGA configuration, QSPI, Crypto and warm reset. Service layer
> +driver also manages secure monitor call (SMC) to communicate with secure monitor
> +code running in EL3.
> +
> +Required properties:
> +--------------------
> +The following are the mandatory properties:
> +
> +- compatible:
> +		"intc,svc-1.0"
> +- method:
> +		smc or hvc
> +			smc - Secure Monitor Call
> +			hvc - Hypervisor Call

Do you really need to support hvc or you are just copying and pasting 
from other implementations?

> +- memory-region:
> +		phandle to the reserved memory node. See
> +		Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
> +		for details

Please also put the svc node under the /firmware node and state that in 
the binding.

> +
> +Example:
> +--------
> +
> +	reserved-memory {
> +                #address-cells = <2>;
> +                #size-cells = <2>;
> +                ranges;
> +
> +                service_reserved: svcbuffer@0 {
> +                        compatible = "shared-dma-pool";
> +                        reg = <0x0 0x0 0x0 0x1000000>;
> +                        alignment = <0x1000>;
> +                        no-map;
> +                };
> +        };
> +
> +	svc {
> +		compatible = "intc,svc-1.0";
> +		method = "smc";
> +		memory-region = <&service_reserved>
> +	};
> -- 
> 2.7.4
>