[PATCH v2 0/5] arm64: dts: renesas: r8a77970: enable HDMI output

[PATCH v2 0/5] arm64: dts: renesas: r8a77970: enable HDMI output

[Niklas Söderlund]

Hi,

This series enables the HDMI out put on V3M. It is based on top of the
latest renesas-drivers release and depends on patches from both Laurent
and Sergei.

- [PATCH v2 00/12] R-Car DU: Convert LVDS code to bridge driver
- [PATCH v2 0/2] Add R-Car V3M (R8A77970) support to the DU driver
- [PATCH 0/3] Add R-Car V3M (R8A77970) support to the R-Car LVDS driver

It is tested on V3M by connecting the HDMI output to a monitor and
booting the board. To console will eventually show up on the screen.

* Changes since v1.
- Replace patches 1-3 by patches posted by Sergei which I had missed.
- Fixed comment on 4/5 by adding reset and power-domain properties.

Niklas Söderlund (2):
  arm64: dts: renesas: r8a77970: add the LVDS instance
  arm64: dts: renesas: eagle: add HDMI output using the ADV7511W

Sergei Shtylyov (3):
  arm64: dts: renesass: r8a77970: add FCPVD support
  arm64: dts: renesass: r8a77970: add VSPD support
  arm64: dts: renesas: r8a77970: add DU support

 arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 66 +++++++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a77970.dtsi      | 73 ++++++++++++++++++++++++++
 2 files changed, 139 insertions(+)

-- 
2.16.1

[PATCH v2 2/5] arm64: dts: renesass: r8a77970: add VSPD support

[Niklas Söderlund]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Describe VSPD0 in the R8A77970 device tree; it will be used by DU in
the next patch...

Based on the original (and large) patch by Daisuke Matsushita
<daisuke.matsushita.ns@hitachi.com>.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 arch/arm64/boot/dts/renesas/r8a77970.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 2567e68fe0c6cf7b..5eb5d4b26f955671 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -620,6 +620,16 @@
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
 			resets = <&cpg 603>;
 		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x4000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
 	};
 
 	timer {
-- 
2.16.1

Re: [PATCH v2 2/5] arm64: dts: renesass: r8a77970: add VSPD support

[Kieran Bingham]

Hi Niklas, and Sergei,

On 08/02/18 15:47, Niklas Söderlund wrote:
> From: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> 
> Describe VSPD0 in the R8A77970 device tree; it will be used by DU in
> the next patch...
> 
> Based on the original (and large) patch by Daisuke Matsushita
> <daisuke.matsushita.ns-FCd8Q96Dh0JBDgjK7y7TUQ@public.gmane.org>.
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>

Seems odd that the interrupts here are so distant on the V3M platform vs the
others ... but the data sheets agree.

Registers, interrupt, CPG values reviewed.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>

> ---
>  arch/arm64/boot/dts/renesas/r8a77970.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> index 2567e68fe0c6cf7b..5eb5d4b26f955671 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> @@ -620,6 +620,16 @@
>  			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
>  			resets = <&cpg 603>;
>  		};
> +
> +		vspd0: vsp@fea20000 {
> +			compatible = "renesas,vsp2";
> +			reg = <0 0xfea20000 0 0x4000>;
> +			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 623>;
> +			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
> +			resets = <&cpg 623>;
> +			renesas,fcp = <&fcpvd0>;
> +		};
>  	};
>  
>  	timer {
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/5] arm64: dts: renesass: r8a77970: add FCPVD support

[Niklas Söderlund]

From: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>

Describe FCPVD0 in the R8A77970 device tree; it will be used by VSPD0 in
the next patch...

Based on the original (and large) patch by Daisuke Matsushita
<daisuke.matsushita.ns-FCd8Q96Dh0JBDgjK7y7TUQ@public.gmane.org>.

Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
---
 arch/arm64/boot/dts/renesas/r8a77970.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 13c88414cb432b1a..2567e68fe0c6cf7b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -612,6 +612,14 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
 	};
 
 	timer {
-- 
2.16.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 1/5] arm64: dts: renesass: r8a77970: add FCPVD support

[Kieran Bingham]

Hi Niklas, and Sergei,

On 08/02/18 15:47, Niklas Söderlund wrote:
> From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> Describe FCPVD0 in the R8A77970 device tree; it will be used by VSPD0 in
> the next patch...
> 
> Based on the original (and large) patch by Daisuke Matsushita
> <daisuke.matsushita.ns@hitachi.com>.
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Register address and CPG verified:

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

> ---
>  arch/arm64/boot/dts/renesas/r8a77970.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> index 13c88414cb432b1a..2567e68fe0c6cf7b 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> @@ -612,6 +612,14 @@
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  		};
> +
> +		fcpvd0: fcp@fea27000 {
> +			compatible = "renesas,fcpv";
> +			reg = <0 0xfea27000 0 0x200>;
> +			clocks = <&cpg CPG_MOD 603>;
> +			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
> +			resets = <&cpg 603>;
> +		};
>  	};
>  
>  	timer {
> 

Re: [PATCH v2 1/5] arm64: dts: renesass: r8a77970: add FCPVD support

[Simon Horman]

On Thu, Feb 08, 2018 at 04:47:16PM +0100, Niklas Söderlund wrote:
> From: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> 
> Describe FCPVD0 in the R8A77970 device tree; it will be used by VSPD0 in
> the next patch...
> 
> Based on the original (and large) patch by Daisuke Matsushita
> <daisuke.matsushita.ns-FCd8Q96Dh0JBDgjK7y7TUQ@public.gmane.org>.
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
> ---
>  arch/arm64/boot/dts/renesas/r8a77970.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> index 13c88414cb432b1a..2567e68fe0c6cf7b 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> @@ -612,6 +612,14 @@
>  			#address-cells = <1>;
>  			#size-cells = <0>;
>  		};
> +
> +		fcpvd0: fcp@fea27000 {
> +			compatible = "renesas,fcpv";
> +			reg = <0 0xfea27000 0 0x200>;
> +			clocks = <&cpg CPG_MOD 603>;
> +			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
> +			resets = <&cpg 603>;

Any reason the following is omitted?

			iommus = <&ipmmu_vi0 8>;

> +		};
>  	};
>  
>  	timer {
> -- 
> 2.16.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/5] arm64: dts: renesas: r8a77970: add DU support

[Niklas Söderlund]

From: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>

Define the generic R8A77970 part of the DU device node.

Based on the original (and large) patch by Daisuke Matsushita
<daisuke.matsushita.ns-FCd8Q96Dh0JBDgjK7y7TUQ@public.gmane.org>.

Signed-off-by: Vladimir Barinov <vladimir.barinov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
---
 arch/arm64/boot/dts/renesas/r8a77970.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 5eb5d4b26f955671..c6056635bd372ce3 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -630,6 +630,34 @@
 			resets = <&cpg 623>;
 			renesas,fcp = <&fcpvd0>;
 		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77970";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			vsps = <&vspd0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds: endpoint {
+					};
+				};
+			};
+		};
 	};
 
 	timer {
-- 
2.16.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 3/5] arm64: dts: renesas: r8a77970: add DU support

[Kieran Bingham]

Hi Sergei, Niklas

On 08/02/18 15:47, Niklas Söderlund wrote:
> From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> Define the generic R8A77970 part of the DU device node.
> 
> Based on the original (and large) patch by Daisuke Matsushita
> <daisuke.matsushita.ns@hitachi.com>.
> 
> Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

I almost got this wrong ... thinking there was only a single output ... but
there are indeed two outputs, just a single DU channel.

LGTM...

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

> ---
>  arch/arm64/boot/dts/renesas/r8a77970.dtsi | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> index 5eb5d4b26f955671..c6056635bd372ce3 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> @@ -630,6 +630,34 @@
>  			resets = <&cpg 623>;
>  			renesas,fcp = <&fcpvd0>;
>  		};
> +
> +		du: display@feb00000 {
> +			compatible = "renesas,du-r8a77970";
> +			reg = <0 0xfeb00000 0 0x80000>;
> +			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 724>;
> +			clock-names = "du.0";
> +			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
> +			vsps = <&vspd0>;
> +			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +					du_out_rgb: endpoint {
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +					du_out_lvds: endpoint {
> +					};
> +				};
> +			};
> +		};
>  	};
>  
>  	timer {
> 

[PATCH v2 4/5] arm64: dts: renesas: r8a77970: add the LVDS instance

[Niklas Söderlund]

Add the LVDS device to r8a77970.dtsi in a disabled state. Also connect
the it to the LVDS output of the DU. While at it align the endpoint name
of the du to du_out_lvds0 which is used in other Renesas DTS files to
describe this link.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
---
 arch/arm64/boot/dts/renesas/r8a77970.dtsi | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index c6056635bd372ce3..9c65884cc384952d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -653,7 +653,34 @@
 
 				port@1 {
 					reg = <1>;
-					du_out_lvds: endpoint {
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a77970-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
 					};
 				};
 			};
-- 
2.16.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/5] arm64: dts: renesas: r8a77970: add the LVDS instance

[Sergei Shtylyov]

Hello!

On 02/08/2018 06:47 PM, Niklas Söderlund wrote:

> Add the LVDS device to r8a77970.dtsi in a disabled state. Also connect
> the it to the LVDS output of the DU. While at it align the endpoint name
> of the du to du_out_lvds0 which is used in other Renesas DTS files to
> describe this link.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
>  arch/arm64/boot/dts/renesas/r8a77970.dtsi | 29 ++++++++++++++++++++++++++++-
>  1 file changed, 28 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> index c6056635bd372ce3..9c65884cc384952d 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> @@ -653,7 +653,34 @@
>  
>  				port@1 {
>  					reg = <1>;
> -					du_out_lvds: endpoint {
> +					du_out_lvds0: endpoint {
> +						remote-endpoint = <&lvds0_in>;
> +					};
> +				};
> +			};
> +		};
> +
> +		lvds0: lvds@feb90000 {
> +			compatible = "renesas,r8a77970-lvds";
> +			reg = <0 0xfeb90000 0 0x14>;
> +			clocks = <&cpg CPG_MOD 727>;
> +			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
> +			resets = <&cpg 727>;
> +			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +					lvds0_in: endpoint {
> +						remote-endpoint = <&du_out_lvds0>;
> +					};
> +				};
> +				port@1 {
> +					reg = <1>;
> +					lvds0_out: endpoint {
>  					};
>  				};
>  			};


   That's basically my patch modulo the added "power-domains" and "resets" props, and the node/endpoint rename (of a dubious value, if you ask me ;-)).

MBSR, Sergei

Re: [PATCH v2 4/5] arm64: dts: renesas: r8a77970: add the LVDS instance

[Simon Horman]

On Thu, Feb 08, 2018 at 07:05:53PM +0300, Sergei Shtylyov wrote:
> Hello!
> 
> On 02/08/2018 06:47 PM, Niklas Söderlund wrote:
> 
> > Add the LVDS device to r8a77970.dtsi in a disabled state. Also connect
> > the it to the LVDS output of the DU. While at it align the endpoint name
> > of the du to du_out_lvds0 which is used in other Renesas DTS files to
> > describe this link.
> > 
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > ---
> >  arch/arm64/boot/dts/renesas/r8a77970.dtsi | 29 ++++++++++++++++++++++++++++-
> >  1 file changed, 28 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> > index c6056635bd372ce3..9c65884cc384952d 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> > @@ -653,7 +653,34 @@
> >  
> >  				port@1 {
> >  					reg = <1>;
> > -					du_out_lvds: endpoint {
> > +					du_out_lvds0: endpoint {
> > +						remote-endpoint = <&lvds0_in>;
> > +					};
> > +				};
> > +			};
> > +		};
> > +
> > +		lvds0: lvds@feb90000 {
> > +			compatible = "renesas,r8a77970-lvds";
> > +			reg = <0 0xfeb90000 0 0x14>;
> > +			clocks = <&cpg CPG_MOD 727>;
> > +			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
> > +			resets = <&cpg 727>;
> > +			status = "disabled";
> > +
> > +			ports {
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +
> > +				port@0 {
> > +					reg = <0>;
> > +					lvds0_in: endpoint {
> > +						remote-endpoint = <&du_out_lvds0>;
> > +					};
> > +				};
> > +				port@1 {
> > +					reg = <1>;
> > +					lvds0_out: endpoint {
> >  					};
> >  				};
> >  			};
> 
> 
>    That's basically my patch modulo the added "power-domains" and "resets" props, and the node/endpoint rename (of a dubious value, if you ask me ;-)).

Hi Sergei,

after speaking with yourself and Niklas - who I think also spoke with you -
I'd be most grateful if you could repost this series at your convenience,
with the author and other outstanding review addressed.

Thanks.

[PATCH v2 5/5] arm64: dts: renesas: eagle: add HDMI output using the ADV7511W

[Niklas Söderlund]

Add the HDMI connector and the ADV7511W, also connect it to LVDS. Enable
the DU and LVDS to be able to use the HDMI output.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
---
 arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 66 ++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 359e835cca9876fe..c0fd144970c55fa2 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -31,6 +31,17 @@
 		/* first 128MB is reserved for secure area. */
 		reg = <0x0 0x48000000 0x0 0x38000000>;
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
 };
 
 &avb {
@@ -67,9 +78,46 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
 };
 
 &pfc {
+	du_pins: du {
+		groups = "du_rgb666", "du_sync", "du_oddf", "du_clk_out";
+		function = "du";
+	};
+
 	i2c0_pins: i2c0 {
 		groups = "i2c0";
 		function = "i2c0";
@@ -92,3 +140,21 @@
 
 	status = "okay";
 };
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};
-- 
2.16.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html