* [PATCH] drm/panel: simple: Add Sharp LQ035Q7DB03 panel support
@ 2018-05-21 23:23 Vladimir Zapolskiy
2018-05-23 18:39 ` Rob Herring
0 siblings, 1 reply; 2+ messages in thread
From: Vladimir Zapolskiy @ 2018-05-21 23:23 UTC (permalink / raw)
To: Thierry Reding, Rob Herring; +Cc: David Airlie, devicetree, dri-devel
The change adds support for Sharp LQ035Q7DB03 3.5" QVGA panel.
Note that this aged panel is already found in the kernel sources,
for instance in board mach files mach-mx21ads.c, mach-mx27ads.c,
mach-pcm043.c, lpd270.c and imx27-phytec-phycore-rdk.dts.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
---
.../bindings/display/panel/sharp,lq035q7db03.txt | 7 ++++++
drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
2 files changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt
new file mode 100644
index 0000000..42027e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt
@@ -0,0 +1,7 @@
+Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,lq035q7db03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index cbf1ab4..8970261 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1764,6 +1764,30 @@ static const struct panel_desc samsung_ltn140at29_301 = {
},
};
+static const struct drm_display_mode sharp_lq035q7db03_mode = {
+ .clock = 5500,
+ .hdisplay = 240,
+ .hsync_start = 240 + 16,
+ .hsync_end = 240 + 16 + 7,
+ .htotal = 240 + 16 + 7 + 5,
+ .vdisplay = 320,
+ .vsync_start = 320 + 9,
+ .vsync_end = 320 + 9 + 1,
+ .vtotal = 320 + 9 + 1 + 7,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc sharp_lq035q7db03 = {
+ .modes = &sharp_lq035q7db03_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 54,
+ .height = 72,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+};
+
static const struct display_timing sharp_lq101k1ly04_timing = {
.pixelclock = { 60000000, 65000000, 80000000 },
.hactive = { 1280, 1280, 1280 },
@@ -2236,6 +2260,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "samsung,ltn140at29-301",
.data = &samsung_ltn140at29_301,
}, {
+ .compatible = "sharp,lq035q7db03",
+ .data = &sharp_lq035q7db03,
+ }, {
.compatible = "sharp,lq101k1ly04",
.data = &sharp_lq101k1ly04,
}, {
--
2.10.2
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] drm/panel: simple: Add Sharp LQ035Q7DB03 panel support
2018-05-21 23:23 [PATCH] drm/panel: simple: Add Sharp LQ035Q7DB03 panel support Vladimir Zapolskiy
@ 2018-05-23 18:39 ` Rob Herring
0 siblings, 0 replies; 2+ messages in thread
From: Rob Herring @ 2018-05-23 18:39 UTC (permalink / raw)
To: Vladimir Zapolskiy; +Cc: David Airlie, devicetree, Thierry Reding, dri-devel
On Tue, May 22, 2018 at 02:23:14AM +0300, Vladimir Zapolskiy wrote:
> The change adds support for Sharp LQ035Q7DB03 3.5" QVGA panel.
>
> Note that this aged panel is already found in the kernel sources,
> for instance in board mach files mach-mx21ads.c, mach-mx27ads.c,
> mach-pcm043.c, lpd270.c and imx27-phytec-phycore-rdk.dts.
>
> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
> ---
> .../bindings/display/panel/sharp,lq035q7db03.txt | 7 ++++++
> drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
> 2 files changed, 34 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt
> new file mode 100644
> index 0000000..42027e5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq035q7db03.txt
> @@ -0,0 +1,7 @@
> +Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "sharp,lq035q7db03"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
You need to state which properties from there this panel actually uses.
Rob
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-05-23 18:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-21 23:23 [PATCH] drm/panel: simple: Add Sharp LQ035Q7DB03 panel support Vladimir Zapolskiy
2018-05-23 18:39 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).