[PATCH v4 0/3] thermal: add support for r8a77995

[PATCH v4 0/3] thermal: add support for r8a77995

[Yoshihiro Kaneko]

This series adds thermal support for r8a77995.
R-Car D3 (r8a77995) have a thermal sensor module which is similar to Gen2.
Therefore this series adds r8a77995 support to rcar_thermal driver not
rcar_gen3_thermal driver.

This series is based on the next branch of Zhang Rui's linux tree.

v4 [Yoshihiro Kaneko]
rcar_thermal.c:
- add Tested-by tag
* As suggested by Simon Horman
- add comment to ".nirqs = 2" of rcar_gen3_thermal

rcar-thermal.txt:
* As suggested by Simon Horman
- update the explanation of the interrupts

r8a77995.dtsi:
- repositioned the thermal subnode by bus address order


v3 [Yoshihiro Kaneko]
* As suggested by Geert Uytterhoeven
rcar_thermal.c:
- make use_of_thermal in structure rcar_thermal_chip a single bit
- add feature bits to rcar_thermal_chip
- add the number of interrupts to rcar_thermal_chip
- remove rcar_thermal_type in rcar_thermal_cip
- make variable chip in rcar_thermal_probe() a const

rcar-thermal.txt:
* No change

r8a77995.dtsi:
* No change


v2 [Yoshihiro Kaneko]
* As suggested by Geert Uytterhoeven
rcar_thermal.c:
- remove rcar_of_data macro
- store a pointer to rcar_thermal_chip in rcar_thermal_priv
- remove unnecessary cast in rcar_thermal_dt_ids

rcar-thermal.txt:
- drop the fallback for D3
- update the paragraph about interrupts

r8a77995.dtsi:
- fix the base address and the register addresses
- drop the fallback

Yoshihiro Kaneko (3):
  thermal: rcar_thermal: add r8a77995 support
  dt-bindings: thermal: rcar-thermal: add R8A77995 support
  arm64: dts: renesas: r8a77995: add thermal device support

 .../devicetree/bindings/thermal/rcar-thermal.txt   |   7 +-
 arch/arm64/boot/dts/renesas/r8a77995.dtsi          |  31 ++++
 drivers/thermal/rcar_thermal.c                     | 158 ++++++++++++++++-----
 3 files changed, 162 insertions(+), 34 deletions(-)

-- 
1.9.1

[PATCH v4 1/3] thermal: rcar_thermal: add r8a77995 support

[Yoshihiro Kaneko]

Add support for R-Car D3 (r8a77995) thermal sensor.

Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
 drivers/thermal/rcar_thermal.c | 158 ++++++++++++++++++++++++++++++++---------
 1 file changed, 126 insertions(+), 32 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 73e5fee..45fb284 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -58,10 +58,47 @@ struct rcar_thermal_common {
 	spinlock_t lock;
 };
 
+struct rcar_thermal_chip {
+	unsigned int use_of_thermal : 1;
+	unsigned int has_filonoff : 1;
+	unsigned int irq_per_ch : 1;
+	unsigned int needs_suspend_resume : 1;
+	unsigned int nirqs;
+};
+
+static const struct rcar_thermal_chip rcar_thermal = {
+	.use_of_thermal = 0,
+	.has_filonoff = 1,
+	.irq_per_ch = 0,
+	.needs_suspend_resume = 0,
+	.nirqs = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen2_thermal = {
+	.use_of_thermal = 1,
+	.has_filonoff = 1,
+	.irq_per_ch = 0,
+	.needs_suspend_resume = 0,
+	.nirqs = 1,
+};
+
+static const struct rcar_thermal_chip rcar_gen3_thermal = {
+	.use_of_thermal = 1,
+	.has_filonoff = 0,
+	.irq_per_ch = 1,
+	.needs_suspend_resume = 1,
+	/*
+	 * The Gen3 chip has 3 interrupts, but this driver uses only 2
+	 * interrupts to detect a temperature change, rise or fall.
+	 */
+	.nirqs = 2,
+};
+
 struct rcar_thermal_priv {
 	void __iomem *base;
 	struct rcar_thermal_common *common;
 	struct thermal_zone_device *zone;
+	const struct rcar_thermal_chip *chip;
 	struct delayed_work work;
 	struct mutex lock;
 	struct list_head list;
@@ -77,13 +114,20 @@ struct rcar_thermal_priv {
 #define rcar_priv_to_dev(priv)		((priv)->common->dev)
 #define rcar_has_irq_support(priv)	((priv)->common->base)
 #define rcar_id_to_shift(priv)		((priv)->id * 8)
-#define rcar_of_data(dev)		((unsigned long)of_device_get_match_data(dev))
-#define rcar_use_of_thermal(dev)	(rcar_of_data(dev) == USE_OF_THERMAL)
 
-#define USE_OF_THERMAL	1
 static const struct of_device_id rcar_thermal_dt_ids[] = {
-	{ .compatible = "renesas,rcar-thermal", },
-	{ .compatible = "renesas,rcar-gen2-thermal", .data = (void *)USE_OF_THERMAL },
+	{
+		.compatible = "renesas,rcar-thermal",
+		.data = &rcar_thermal,
+	},
+	{
+		.compatible = "renesas,rcar-gen2-thermal",
+		 .data = &rcar_gen2_thermal,
+	},
+	{
+		.compatible = "renesas,thermal-r8a77995",
+		.data = &rcar_gen3_thermal,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
@@ -190,7 +234,8 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv)
 	 * enable IRQ
 	 */
 	if (rcar_has_irq_support(priv)) {
-		rcar_thermal_write(priv, FILONOFF, 0);
+		if (priv->chip->has_filonoff)
+			rcar_thermal_write(priv, FILONOFF, 0);
 
 		/* enable Rising/Falling edge interrupt */
 		rcar_thermal_write(priv, POSNEG,  0x1);
@@ -420,7 +465,7 @@ static int rcar_thermal_remove(struct platform_device *pdev)
 
 	rcar_thermal_for_each_priv(priv, common) {
 		rcar_thermal_irq_disable(priv);
-		if (rcar_use_of_thermal(dev))
+		if (priv->chip->use_of_thermal)
 			thermal_remove_hwmon_sysfs(priv->zone);
 		else
 			thermal_zone_device_unregister(priv->zone);
@@ -438,6 +483,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	struct rcar_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
 	struct resource *res, *irq;
+	const struct rcar_thermal_chip *chip = of_device_get_match_data(dev);
 	int mres = 0;
 	int i;
 	int ret = -ENODEV;
@@ -457,19 +503,35 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
-	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (irq) {
-		/*
-		 * platform has IRQ support.
-		 * Then, driver uses common registers
-		 * rcar_has_irq_support() will be enabled
-		 */
-		res = platform_get_resource(pdev, IORESOURCE_MEM, mres++);
-		common->base = devm_ioremap_resource(dev, res);
-		if (IS_ERR(common->base))
-			return PTR_ERR(common->base);
+	for (i = 0; i < chip->nirqs; i++) {
+		irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+		if (!irq)
+			continue;
+		if (!common->base) {
+			/*
+			 * platform has IRQ support.
+			 * Then, driver uses common registers
+			 * rcar_has_irq_support() will be enabled
+			 */
+			res = platform_get_resource(pdev, IORESOURCE_MEM,
+						    mres++);
+			common->base = devm_ioremap_resource(dev, res);
+			if (IS_ERR(common->base))
+				return PTR_ERR(common->base);
+
+			idle = 0; /* polling delay is not needed */
+		}
 
-		idle = 0; /* polling delay is not needed */
+		ret = devm_request_irq(dev, irq->start, rcar_thermal_irq,
+				       IRQF_SHARED, dev_name(dev), common);
+		if (ret) {
+			dev_err(dev, "irq request failed\n ");
+			goto error_unregister;
+		}
+
+		/* update ENR bits */
+		if (chip->irq_per_ch)
+			enr_bits |= 1 << i;
 	}
 
 	for (i = 0;; i++) {
@@ -491,6 +553,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 
 		priv->common = common;
 		priv->id = i;
+		priv->chip = chip;
 		mutex_init(&priv->lock);
 		INIT_LIST_HEAD(&priv->list);
 		INIT_DELAYED_WORK(&priv->work, rcar_thermal_work);
@@ -498,7 +561,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		if (ret < 0)
 			goto error_unregister;
 
-		if (rcar_use_of_thermal(dev))
+		if (chip->use_of_thermal)
 			priv->zone = devm_thermal_zone_of_sensor_register(
 						dev, i, priv,
 						&rcar_thermal_zone_of_ops);
@@ -515,7 +578,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 			goto error_unregister;
 		}
 
-		if (rcar_use_of_thermal(dev)) {
+		if (chip->use_of_thermal) {
 			/*
 			 * thermal_zone doesn't enable hwmon as default,
 			 * but, enable it here to keep compatible
@@ -531,20 +594,12 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		list_move_tail(&priv->list, &common->head);
 
 		/* update ENR bits */
-		enr_bits |= 3 << (i * 8);
+		if (!chip->irq_per_ch)
+			enr_bits |= 3 << (i * 8);
 	}
 
-	/* enable temperature comparation */
-	if (irq) {
-		ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, 0,
-				       dev_name(dev), common);
-		if (ret) {
-			dev_err(dev, "irq request failed\n ");
-			goto error_unregister;
-		}
-
+	if (enr_bits)
 		rcar_thermal_common_write(common, ENR, enr_bits);
-	}
 
 	dev_info(dev, "%d sensor probed\n", i);
 
@@ -556,9 +611,48 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	return ret;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int rcar_thermal_suspend(struct device *dev)
+{
+	struct rcar_thermal_common *common = dev_get_drvdata(dev);
+	struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+							  typeof(*priv), list);
+
+	if (priv->chip->needs_suspend_resume) {
+		rcar_thermal_common_write(common, ENR, 0);
+		rcar_thermal_irq_disable(priv);
+		rcar_thermal_bset(priv, THSCR, CPCTL, 0);
+	}
+
+	return 0;
+}
+
+static int rcar_thermal_resume(struct device *dev)
+{
+	struct rcar_thermal_common *common = dev_get_drvdata(dev);
+	struct rcar_thermal_priv *priv = list_first_entry(&common->head,
+							  typeof(*priv), list);
+	int ret;
+
+	if (priv->chip->needs_suspend_resume) {
+		ret = rcar_thermal_update_temp(priv);
+		if (ret < 0)
+			return ret;
+		rcar_thermal_irq_enable(priv);
+		rcar_thermal_common_write(common, ENR, 0x03);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(rcar_thermal_pm_ops, rcar_thermal_suspend,
+			 rcar_thermal_resume);
+
 static struct platform_driver rcar_thermal_driver = {
 	.driver	= {
 		.name	= "rcar_thermal",
+		.pm = &rcar_thermal_pm_ops,
 		.of_match_table = rcar_thermal_dt_ids,
 	},
 	.probe		= rcar_thermal_probe,
-- 
1.9.1

[PATCH v4 2/3] dt-bindings: thermal: rcar-thermal: add R8A77995 support

[Yoshihiro Kaneko]

Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 Documentation/devicetree/bindings/thermal/rcar-thermal.txt | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 349e635..67c563f 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -3,7 +3,8 @@
 Required properties:
 - compatible		: "renesas,thermal-<soctype>",
 			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
-			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
+			   "renesas,rcar-thermal" (without thermal-zone) as
+                           fallback except R-Car D3.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7743" (RZ/G1M)
@@ -12,13 +13,15 @@ Required properties:
 			    - "renesas,thermal-r8a7791" (R-Car M2-W)
 			    - "renesas,thermal-r8a7792" (R-Car V2H)
 			    - "renesas,thermal-r8a7793" (R-Car M2-N)
+			    - "renesas,thermal-r8a77995" (R-Car D3)
 - reg			: Address range of the thermal registers.
 			  The 1st reg will be recognized as common register
 			  if it has "interrupts".
 
 Option properties:
 
-- interrupts		: use interrupt
+- interrupts		: If present should contain 3 interrupts for
+                          R-Car D3 or 1 interrupt otherwise.
 
 Example (non interrupt support):
 
-- 
1.9.1

[PATCH v4 3/3] arm64: dts: renesas: r8a77995: add thermal device support

[Yoshihiro Kaneko]

Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm64/boot/dts/renesas/r8a77995.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 82aed7e..d4884e3 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -216,6 +216,18 @@
 			#power-domain-cells = <1>;
 		};
 
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77995";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		intc_ex: interrupt-controller@e61c0000 {
 			compatible = "renesas,intc-ex-r8a77995", "renesas,irqc";
 			#interrupt-cells = <2>;
@@ -785,6 +797,25 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-- 
1.9.1

Re: [PATCH v4 2/3] dt-bindings: thermal: rcar-thermal: add R8A77995 support

[Rob Herring]

On Sun, May 20, 2018 at 06:26:18PM +0900, Yoshihiro Kaneko wrote:
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>  Documentation/devicetree/bindings/thermal/rcar-thermal.txt | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 2/3] dt-bindings: thermal: rcar-thermal: add R8A77995 support

[Simon Horman]

On Sun, May 20, 2018 at 06:26:18PM +0900, Yoshihiro Kaneko wrote:
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

> ---
>  Documentation/devicetree/bindings/thermal/rcar-thermal.txt | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
> index 349e635..67c563f 100644
> --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
> @@ -3,7 +3,8 @@
>  Required properties:
>  - compatible		: "renesas,thermal-<soctype>",
>  			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
> -			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
> +			   "renesas,rcar-thermal" (without thermal-zone) as
> +                           fallback except R-Car D3.
>  			  Examples with soctypes are:
>  			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
>  			    - "renesas,thermal-r8a7743" (RZ/G1M)
> @@ -12,13 +13,15 @@ Required properties:
>  			    - "renesas,thermal-r8a7791" (R-Car M2-W)
>  			    - "renesas,thermal-r8a7792" (R-Car V2H)
>  			    - "renesas,thermal-r8a7793" (R-Car M2-N)
> +			    - "renesas,thermal-r8a77995" (R-Car D3)
>  - reg			: Address range of the thermal registers.
>  			  The 1st reg will be recognized as common register
>  			  if it has "interrupts".
>  
>  Option properties:
>  
> -- interrupts		: use interrupt
> +- interrupts		: If present should contain 3 interrupts for
> +                          R-Car D3 or 1 interrupt otherwise.
>  
>  Example (non interrupt support):
>  
> -- 
> 1.9.1
> 

Re: [PATCH v4 1/3] thermal: rcar_thermal: add r8a77995 support

[Simon Horman]

On Sun, May 20, 2018 at 06:26:17PM +0900, Yoshihiro Kaneko wrote:
> Add support for R-Car D3 (r8a77995) thermal sensor.
> 
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH v4 3/3] arm64: dts: renesas: r8a77995: add thermal device support

[Simon Horman]

On Sun, May 20, 2018 at 06:26:19PM +0900, Yoshihiro Kaneko wrote:
> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Thanks, applied.