[PATCHv2 0/2] arm64: dts: add basic DTS for imx8qm-rom7720 board

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCHv2 0/2] arm64: dts: add basic DTS for imx8qm-rom7720 board
@ 2019-07-01 11:42 Oliver Graute
  2019-07-01 11:42 ` [PATCHv2 1/2] arm64: add gpio4 and gpio5 to basic DTS for i.MX8MQ Oliver Graute
  2019-07-01 11:42 ` [PATCHv2 2/2] arm64: dts: add basic DTS for imx8qm-rom7720-a1 board Oliver Graute
  0 siblings, 2 replies; 3+ messages in thread
From: Oliver Graute @ 2019-07-01 11:42 UTC (permalink / raw)
  To: aisheng.dong
  Cc: sboyd, mturquette, Oliver Graute, Rob Herring, Mark Rutland,
	Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Li Yang, Sriram Dash, Pramod Kumar,
	Pankaj Bansal, Vabhav Sharma, Lucas Stach, Bhaskar Upadhaya,
	Manivannan Sadhasivam, Ulf Hansson, devicetree, linux-k

This patchset is ontop of Aisheng Dongs clock driver changes for the imx8qm

https://patchwork.kernel.org/cover/10824537/

This patchset is based on next-20190222

I need information about the status of the integration of the imx8qm clock
driver into mainline. Is this ongoing?

I need some hints why the imx8qm-rom7720 do NOT boot with the following
changes. It stops at "Starting kernel ..."

Oliver Graute (2):
  arm64: add gpio4 and gpio5 to basic DTS for i.MX8MQ
  arm64: dts: add basic DTS for imx8qm-rom7720-a1 board

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8qm-rom7720-a1.dts  | 221 ++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8qm.dtsi     |  19 ++
 3 files changed, 241 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts

-- 
2.17.1

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCHv2 1/2] arm64: add gpio4 and gpio5 to basic DTS for i.MX8MQ
  2019-07-01 11:42 [PATCHv2 0/2] arm64: dts: add basic DTS for imx8qm-rom7720 board Oliver Graute
@ 2019-07-01 11:42 ` Oliver Graute
  2019-07-01 11:42 ` [PATCHv2 2/2] arm64: dts: add basic DTS for imx8qm-rom7720-a1 board Oliver Graute
  1 sibling, 0 replies; 3+ messages in thread
From: Oliver Graute @ 2019-07-01 11:42 UTC (permalink / raw)
  To: aisheng.dong
  Cc: sboyd, mturquette, Oliver Graute, Rob Herring, Mark Rutland,
	Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Li Yang, Sriram Dash, Pramod Kumar,
	Vabhav Sharma, Manivannan Sadhasivam, Lucas Stach,
	Bhaskar Upadhaya, Anson Huang, Daniel Baluta, Ulf Hansson

add gpio4 to imx8qm.dtsi
add gpio5 to imx8qm.dtsi

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
 arch/arm64/boot/dts/freescale/imx8qm.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 526cbbddc202..fe4c584625cf 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -121,6 +121,25 @@
 		interrupt-parent = <&gic>;
 	};
 
+	gpio4: gpio@5d0c0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+};
+	gpio5: gpio@5d0d0000 {
+		compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+		reg = <0x0 0x5d0d0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+		 gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCHv2 2/2] arm64: dts: add basic DTS for imx8qm-rom7720-a1 board
  2019-07-01 11:42 [PATCHv2 0/2] arm64: dts: add basic DTS for imx8qm-rom7720 board Oliver Graute
  2019-07-01 11:42 ` [PATCHv2 1/2] arm64: add gpio4 and gpio5 to basic DTS for i.MX8MQ Oliver Graute
@ 2019-07-01 11:42 ` Oliver Graute
  1 sibling, 0 replies; 3+ messages in thread
From: Oliver Graute @ 2019-07-01 11:42 UTC (permalink / raw)
  To: aisheng.dong
  Cc: sboyd, mturquette, Oliver Graute, Rob Herring, Mark Rutland,
	Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Li Yang, Sriram Dash, Manivannan Sadhasivam,
	Vabhav Sharma, Pankaj Bansal, Bhaskar Upadhaya, Lucas Stach,
	Ulf Hansson, devicetree, linux-kernel, linux-arm-kernel

Add basic dts support for a Advantech iMX8QM Qseven Board

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8qm-rom7720-a1.dts  | 221 ++++++++++++++++++
 2 files changed, 222 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index b8e5e3bd72c5..b013715c5be1 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -23,3 +23,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-rom7720-a1.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts b/arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts
new file mode 100644
index 000000000000..229853f4097b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/dts-v1/;
+
+#include "imx8qm.dtsi"
+
+/ {
+	model = "Advantech iMX8QM Qseven series";
+	compatible = "fsl,imx8qm";
+
+	board {
+		compatible = "proc-board";
+		board-type = "ROM-7720_A1";
+		board-cpu  = "iMX8QM";
+	};
+
+	chosen {
+		bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200";
+		stdout-path = &dma_lpuart0;
+	};
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+		/delete-node/ cpu@101;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reg_usdhc2_vmmc: usdhc2_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "sw-3p3-sd1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+		off-on-delay = <3000>;
+		enable-active-high;
+	};
+};
+
+&dma_lpuart0 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	fsl,rgmii_rxc_dly;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			at803x,eee-disabled;
+			at803x,vddio-1p8v;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_hog_1: hoggrp-1 {
+		fsl,pins = <
+			IMX8QM_USB_SS3_TC0_LSIO_GPIO4_IO03	  0x06000048
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD	0x000014a0
+			IMX8QM_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+			IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO		0x06000020
+			IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000060
+			IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000060
+			IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000060
+			IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000060
+			IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000060
+			IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000060
+			IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000060
+			IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000060
+			IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000060
+			IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000060
+			IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000060
+			IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000060
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8QM_UART0_RX_DMA_UART0_RX		0x06000020
+			IMX8QM_UART0_TX_DMA_UART0_TX		0x06000020
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
+			IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
+			IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+			IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+			IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+			IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+			IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+			IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+			IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+			IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+			IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+			IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000021
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040
+			IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020
+			IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+			IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+			IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+			IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+			IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+			IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+			IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+			IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+			IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+			IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000020
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040
+				IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020
+			IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+			IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+			IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+			IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+			IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+			IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+			IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+			IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+			IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+			IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000020
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+		fsl,pins = <
+			IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x00000021
+			IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021
+			IMX8QM_USDHC1_RESET_B_LSIO_GPIO4_IO07	0x00000021
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK	0x06000041
+			IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD	0x00000021
+			IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021
+			IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021
+			IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021
+			IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021
+			IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK	0x06000040
+			IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD	0x00000020
+			IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020
+			IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020
+			IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020
+			IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020
+			IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK	0x06000040
+			IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD	0x00000020
+			IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020
+			IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020
+			IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020
+			IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020
+			IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020
+		>;
+	};
+};
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-07-01 11:42 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-01 11:42 [PATCHv2 0/2] arm64: dts: add basic DTS for imx8qm-rom7720 board Oliver Graute
2019-07-01 11:42 ` [PATCHv2 1/2] arm64: add gpio4 and gpio5 to basic DTS for i.MX8MQ Oliver Graute
2019-07-01 11:42 ` [PATCHv2 2/2] arm64: dts: add basic DTS for imx8qm-rom7720-a1 board Oliver Graute

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).