* [PATCH 0/2] add support to STM LSM6DS3TR-C 6-axis Mems sensor @ 2019-06-29 10:13 Lorenzo Bianconi 2019-06-29 10:13 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C Lorenzo Bianconi 2019-06-29 10:13 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds3tr-c device bindings Lorenzo Bianconi 0 siblings, 2 replies; 5+ messages in thread From: Lorenzo Bianconi @ 2019-06-29 10:13 UTC (permalink / raw) To: jic23; +Cc: linux-iio, devicetree, lorenzo.bianconi Add support to STM LSM6DS3TR-C 6-axis sensor https://www.st.com/resource/en/datasheet/lsm6ds3tr-c.pdf Lorenzo Bianconi (2): iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds3tr-c device bindings Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 8 ++++---- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 7 files changed, 22 insertions(+), 6 deletions(-) -- 2.21.0 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C 2019-06-29 10:13 [PATCH 0/2] add support to STM LSM6DS3TR-C 6-axis Mems sensor Lorenzo Bianconi @ 2019-06-29 10:13 ` Lorenzo Bianconi 2019-07-14 16:27 ` Jonathan Cameron 2019-06-29 10:13 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds3tr-c device bindings Lorenzo Bianconi 1 sibling, 1 reply; 5+ messages in thread From: Lorenzo Bianconi @ 2019-06-29 10:13 UTC (permalink / raw) To: jic23; +Cc: linux-iio, devicetree, lorenzo.bianconi Add support to STM LSM6DS3TR-C 6-axis (acc + gyro) Mems sensor https://www.st.com/resource/en/datasheet/lsm6ds3tr-c.pdf Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> --- drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 8 ++++---- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 6 files changed, 21 insertions(+), 6 deletions(-) diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index 9e592973a8a6..b254d03e2043 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -9,7 +9,7 @@ config IIO_ST_LSM6DSX help Say yes here to build support for STMicroelectronics LSM6DSx imu sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, - ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr + ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c To compile this driver as a module, choose M here: the module will be called st_lsm6dsx. diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index cd1642bb4ec0..ffa8402763c5 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -23,6 +23,7 @@ #define ST_ASM330LHH_DEV_NAME "asm330lhh" #define ST_LSM6DSOX_DEV_NAME "lsm6dsox" #define ST_LSM6DSR_DEV_NAME "lsm6dsr" +#define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c" enum st_lsm6dsx_hw_id { ST_LSM6DS3_ID, @@ -34,6 +35,7 @@ enum st_lsm6dsx_hw_id { ST_ASM330LHH_ID, ST_LSM6DSOX_ID, ST_LSM6DSR_ID, + ST_LSM6DS3TRC_ID, ST_LSM6DSX_MAX_ID, }; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index 793598ee960a..61b20fa64108 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -1,10 +1,10 @@ /* * STMicroelectronics st_lsm6dsx FIFO buffer library driver * - * LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC: The FIFO buffer can be - * configured to store data from gyroscope and accelerometer. Samples are - * queued without any tag according to a specific pattern based on - * 'FIFO data sets' (6 bytes each): + * LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C: + * The FIFO buffer can be configured to store data from gyroscope and + * accelerometer. Samples are queued without any tag according to a + * specific pattern based on 'FIFO data sets' (6 bytes each): * - 1st data set is reserved for gyroscope data * - 2nd data set is reserved for accelerometer data * The FIFO pattern changes depending on the ODRs and decimation factors diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index 04233928d23e..dc479e139cfc 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -17,7 +17,7 @@ * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 * - FIFO size: 8KB * - * - LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC: + * - LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C: * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416 * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 @@ -234,6 +234,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { }, { .hw_id = ST_ISM330DLC_ID, .name = ST_ISM330DLC_DEV_NAME, + }, { + .hw_id = ST_LSM6DS3TRC_ID, + .name = ST_LSM6DS3TRC_DEV_NAME, }, }, .decimator = { diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c index 47581a4e456e..0542f64fb673 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c @@ -76,6 +76,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { .compatible = "st,lsm6dsr", .data = (void *)ST_LSM6DSR_ID, }, + { + .compatible = "st,lsm6ds3tr-c", + .data = (void *)ST_LSM6DS3TRC_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); @@ -90,6 +94,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { { ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID }, { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID }, { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, + { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, {}, }; MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c index facf66978a4b..4e160dcb0d7d 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c @@ -76,6 +76,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { .compatible = "st,lsm6dsr", .data = (void *)ST_LSM6DSR_ID, }, + { + .compatible = "st,lsm6ds3tr-c", + .data = (void *)ST_LSM6DS3TRC_ID, + }, {}, }; MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); @@ -90,6 +94,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { { ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID }, { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID }, { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, + { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, {}, }; MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); -- 2.21.0 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C 2019-06-29 10:13 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C Lorenzo Bianconi @ 2019-07-14 16:27 ` Jonathan Cameron 0 siblings, 0 replies; 5+ messages in thread From: Jonathan Cameron @ 2019-07-14 16:27 UTC (permalink / raw) To: Lorenzo Bianconi; +Cc: linux-iio, devicetree, lorenzo.bianconi On Sat, 29 Jun 2019 12:13:53 +0200 Lorenzo Bianconi <lorenzo@kernel.org> wrote: > Add support to STM LSM6DS3TR-C 6-axis (acc + gyro) Mems sensor > https://www.st.com/resource/en/datasheet/lsm6ds3tr-c.pdf > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to poke at it. Thanks, Jonathan > --- > drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 8 ++++---- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ > 6 files changed, 21 insertions(+), 6 deletions(-) > > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig > index 9e592973a8a6..b254d03e2043 100644 > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig > @@ -9,7 +9,7 @@ config IIO_ST_LSM6DSX > help > Say yes here to build support for STMicroelectronics LSM6DSx imu > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, > - ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr > + ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c > > To compile this driver as a module, choose M here: the module > will be called st_lsm6dsx. > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > index cd1642bb4ec0..ffa8402763c5 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > @@ -23,6 +23,7 @@ > #define ST_ASM330LHH_DEV_NAME "asm330lhh" > #define ST_LSM6DSOX_DEV_NAME "lsm6dsox" > #define ST_LSM6DSR_DEV_NAME "lsm6dsr" > +#define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c" > > enum st_lsm6dsx_hw_id { > ST_LSM6DS3_ID, > @@ -34,6 +35,7 @@ enum st_lsm6dsx_hw_id { > ST_ASM330LHH_ID, > ST_LSM6DSOX_ID, > ST_LSM6DSR_ID, > + ST_LSM6DS3TRC_ID, > ST_LSM6DSX_MAX_ID, > }; > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > index 793598ee960a..61b20fa64108 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > @@ -1,10 +1,10 @@ > /* > * STMicroelectronics st_lsm6dsx FIFO buffer library driver > * > - * LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC: The FIFO buffer can be > - * configured to store data from gyroscope and accelerometer. Samples are > - * queued without any tag according to a specific pattern based on > - * 'FIFO data sets' (6 bytes each): > + * LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C: > + * The FIFO buffer can be configured to store data from gyroscope and > + * accelerometer. Samples are queued without any tag according to a > + * specific pattern based on 'FIFO data sets' (6 bytes each): > * - 1st data set is reserved for gyroscope data > * - 2nd data set is reserved for accelerometer data > * The FIFO pattern changes depending on the ODRs and decimation factors > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > index 04233928d23e..dc479e139cfc 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > @@ -17,7 +17,7 @@ > * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 > * - FIFO size: 8KB > * > - * - LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC: > + * - LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C: > * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416 > * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 > * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 > @@ -234,6 +234,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { > }, { > .hw_id = ST_ISM330DLC_ID, > .name = ST_ISM330DLC_DEV_NAME, > + }, { > + .hw_id = ST_LSM6DS3TRC_ID, > + .name = ST_LSM6DS3TRC_DEV_NAME, > }, > }, > .decimator = { > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c > index 47581a4e456e..0542f64fb673 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c > @@ -76,6 +76,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { > .compatible = "st,lsm6dsr", > .data = (void *)ST_LSM6DSR_ID, > }, > + { > + .compatible = "st,lsm6ds3tr-c", > + .data = (void *)ST_LSM6DS3TRC_ID, > + }, > {}, > }; > MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); > @@ -90,6 +94,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { > { ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID }, > { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID }, > { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, > + { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, > {}, > }; > MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c > index facf66978a4b..4e160dcb0d7d 100644 > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c > @@ -76,6 +76,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { > .compatible = "st,lsm6dsr", > .data = (void *)ST_LSM6DSR_ID, > }, > + { > + .compatible = "st,lsm6ds3tr-c", > + .data = (void *)ST_LSM6DS3TRC_ID, > + }, > {}, > }; > MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); > @@ -90,6 +94,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { > { ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID }, > { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID }, > { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, > + { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, > {}, > }; > MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds3tr-c device bindings 2019-06-29 10:13 [PATCH 0/2] add support to STM LSM6DS3TR-C 6-axis Mems sensor Lorenzo Bianconi 2019-06-29 10:13 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C Lorenzo Bianconi @ 2019-06-29 10:13 ` Lorenzo Bianconi 2019-07-14 16:28 ` Jonathan Cameron 1 sibling, 1 reply; 5+ messages in thread From: Lorenzo Bianconi @ 2019-06-29 10:13 UTC (permalink / raw) To: jic23; +Cc: linux-iio, devicetree, lorenzo.bianconi Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> --- Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt index efec9ece034a..92b48f242356 100644 --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -11,6 +11,7 @@ Required properties: "st,asm330lhh" "st,lsm6dsox" "st,lsm6dsr" + "st,lsm6ds3tr-c" - reg: i2c address of the sensor / spi cs line Optional properties: -- 2.21.0 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds3tr-c device bindings 2019-06-29 10:13 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds3tr-c device bindings Lorenzo Bianconi @ 2019-07-14 16:28 ` Jonathan Cameron 0 siblings, 0 replies; 5+ messages in thread From: Jonathan Cameron @ 2019-07-14 16:28 UTC (permalink / raw) To: Lorenzo Bianconi; +Cc: linux-iio, devicetree, lorenzo.bianconi On Sat, 29 Jun 2019 12:13:54 +0200 Lorenzo Bianconi <lorenzo@kernel.org> wrote: > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> applied. Thanks, Jonathan > --- > Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > index efec9ece034a..92b48f242356 100644 > --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt > @@ -11,6 +11,7 @@ Required properties: > "st,asm330lhh" > "st,lsm6dsox" > "st,lsm6dsr" > + "st,lsm6ds3tr-c" > - reg: i2c address of the sensor / spi cs line > > Optional properties: ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-07-14 16:28 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-06-29 10:13 [PATCH 0/2] add support to STM LSM6DS3TR-C 6-axis Mems sensor Lorenzo Bianconi 2019-06-29 10:13 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C Lorenzo Bianconi 2019-07-14 16:27 ` Jonathan Cameron 2019-06-29 10:13 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds3tr-c device bindings Lorenzo Bianconi 2019-07-14 16:28 ` Jonathan Cameron
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).