* [v2 2/3] dt/bindings: display: Add optional property node defined for Mali DP500
@ 2019-07-19 9:58 Wen He
2019-07-19 11:47 ` Liviu Dudau
2019-08-12 23:19 ` Rob Herring
0 siblings, 2 replies; 4+ messages in thread
From: Wen He @ 2019-07-19 9:58 UTC (permalink / raw)
To: linux-kernel, dri-devel, devicetree, mark.rutland, liviu.dudau,
brian.starkey, airlied, daniel, robh+dt
Cc: leoyang.li, Wen He
Add optional property node 'arm,malidp-arqos-value' for the Mali DP500.
This property describe the ARQoS levels of DP500's QoS signaling.
Signed-off-by: Wen He <wen.he_1@nxp.com>
---
Documentation/devicetree/bindings/display/arm,malidp.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
index 2f7870983ef1..76a0e7251251 100644
--- a/Documentation/devicetree/bindings/display/arm,malidp.txt
+++ b/Documentation/devicetree/bindings/display/arm,malidp.txt
@@ -37,6 +37,8 @@ Optional properties:
Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
to be used for the framebuffer; if not present, the framebuffer may
be located anywhere in memory.
+ - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS
+ levels of DP500's QoS signaling.
Example:
@@ -54,6 +56,7 @@ Example:
clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
clock-names = "pxlclk", "mclk", "aclk", "pclk";
arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+ arm,malidp-arqos-high-level = <&rqosvalue>;
port {
dp0_output: endpoint {
remote-endpoint = <&tda998x_2_input>;
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [v2 2/3] dt/bindings: display: Add optional property node defined for Mali DP500
2019-07-19 9:58 [v2 2/3] dt/bindings: display: Add optional property node defined for Mali DP500 Wen He
@ 2019-07-19 11:47 ` Liviu Dudau
2019-08-12 23:19 ` Rob Herring
1 sibling, 0 replies; 4+ messages in thread
From: Liviu Dudau @ 2019-07-19 11:47 UTC (permalink / raw)
To: Wen He
Cc: mark.rutland, devicetree, airlied, linux-kernel, dri-devel,
leoyang.li, robh+dt
On Fri, Jul 19, 2019 at 05:58:42PM +0800, Wen He wrote:
> Add optional property node 'arm,malidp-arqos-value' for the Mali DP500.
> This property describe the ARQoS levels of DP500's QoS signaling.
>
> Signed-off-by: Wen He <wen.he_1@nxp.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Thanks for the patch!
Best regards,
Liviu
> ---
> Documentation/devicetree/bindings/display/arm,malidp.txt | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
> index 2f7870983ef1..76a0e7251251 100644
> --- a/Documentation/devicetree/bindings/display/arm,malidp.txt
> +++ b/Documentation/devicetree/bindings/display/arm,malidp.txt
> @@ -37,6 +37,8 @@ Optional properties:
> Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
> to be used for the framebuffer; if not present, the framebuffer may
> be located anywhere in memory.
> + - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS
> + levels of DP500's QoS signaling.
>
>
> Example:
> @@ -54,6 +56,7 @@ Example:
> clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
> clock-names = "pxlclk", "mclk", "aclk", "pclk";
> arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> + arm,malidp-arqos-high-level = <&rqosvalue>;
> port {
> dp0_output: endpoint {
> remote-endpoint = <&tda998x_2_input>;
> --
> 2.17.1
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [v2 2/3] dt/bindings: display: Add optional property node defined for Mali DP500
2019-07-19 9:58 [v2 2/3] dt/bindings: display: Add optional property node defined for Mali DP500 Wen He
2019-07-19 11:47 ` Liviu Dudau
@ 2019-08-12 23:19 ` Rob Herring
2019-08-14 6:35 ` [EXT] " Wen He
1 sibling, 1 reply; 4+ messages in thread
From: Rob Herring @ 2019-08-12 23:19 UTC (permalink / raw)
To: Wen He
Cc: linux-kernel, dri-devel, devicetree, mark.rutland, liviu.dudau,
brian.starkey, airlied, daniel, leoyang.li
On Fri, Jul 19, 2019 at 05:58:42PM +0800, Wen He wrote:
> Add optional property node 'arm,malidp-arqos-value' for the Mali DP500.
> This property describe the ARQoS levels of DP500's QoS signaling.
>
> Signed-off-by: Wen He <wen.he_1@nxp.com>
> ---
> Documentation/devicetree/bindings/display/arm,malidp.txt | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
> index 2f7870983ef1..76a0e7251251 100644
> --- a/Documentation/devicetree/bindings/display/arm,malidp.txt
> +++ b/Documentation/devicetree/bindings/display/arm,malidp.txt
> @@ -37,6 +37,8 @@ Optional properties:
> Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
> to be used for the framebuffer; if not present, the framebuffer may
> be located anywhere in memory.
> + - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS
> + levels of DP500's QoS signaling.
u32 here, and...
>
>
> Example:
> @@ -54,6 +56,7 @@ Example:
> clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
> clock-names = "pxlclk", "mclk", "aclk", "pclk";
> arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> + arm,malidp-arqos-high-level = <&rqosvalue>;
phandle here?
> port {
> dp0_output: endpoint {
> remote-endpoint = <&tda998x_2_input>;
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [EXT] Re: [v2 2/3] dt/bindings: display: Add optional property node defined for Mali DP500
2019-08-12 23:19 ` Rob Herring
@ 2019-08-14 6:35 ` Wen He
0 siblings, 0 replies; 4+ messages in thread
From: Wen He @ 2019-08-14 6:35 UTC (permalink / raw)
To: Rob Herring
Cc: linux-kernel, dri-devel, devicetree, mark.rutland, liviu.dudau,
brian.starkey, airlied, daniel, Leo Li
> -----Original Message-----
> From: Rob Herring <robh@kernel.org>
> Sent: 2019年8月13日 7:20
> To: Wen He <wen.he_1@nxp.com>
> Cc: linux-kernel@vger.kernel.org; dri-devel@lists.freedesktop.org;
> devicetree@vger.kernel.org; mark.rutland@arm.com; liviu.dudau@arm.com;
> brian.starkey@arm.com; airlied@linux.ie; daniel@ffwll.ch; Leo Li
> <leoyang.li@nxp.com>
> Subject: [EXT] Re: [v2 2/3] dt/bindings: display: Add optional property node
> defined for Mali DP500
>
>
> On Fri, Jul 19, 2019 at 05:58:42PM +0800, Wen He wrote:
> > Add optional property node 'arm,malidp-arqos-value' for the Mali DP500.
> > This property describe the ARQoS levels of DP500's QoS signaling.
> >
> > Signed-off-by: Wen He <wen.he_1@nxp.com>
> > ---
> > Documentation/devicetree/bindings/display/arm,malidp.txt | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt
> b/Documentation/devicetree/bindings/display/arm,malidp.txt
> > index 2f7870983ef1..76a0e7251251 100644
> > --- a/Documentation/devicetree/bindings/display/arm,malidp.txt
> > +++ b/Documentation/devicetree/bindings/display/arm,malidp.txt
> > @@ -37,6 +37,8 @@ Optional properties:
> >
> Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
> > to be used for the framebuffer; if not present, the framebuffer may
> > be located anywhere in memory.
> > + - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS
> > + levels of DP500's QoS signaling.
>
> u32 here, and...
Hi Rob,
Sorry, should be written as" phandle to a node describing the AQRoS levels of DP500's QoS signaling"..
Is that ok?
Best Regards,
Wen
>
> >
> >
> > Example:
> > @@ -54,6 +56,7 @@ Example:
> > clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>,
> <&fpgaosc1>;
> > clock-names = "pxlclk", "mclk", "aclk", "pclk";
> > arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
> > + arm,malidp-arqos-high-level = <&rqosvalue>;
>
> phandle here?
>
> > port {
> > dp0_output: endpoint {
> > remote-endpoint = <&tda998x_2_input>;
> > --
> > 2.17.1
> >
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-08-14 6:35 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-19 9:58 [v2 2/3] dt/bindings: display: Add optional property node defined for Mali DP500 Wen He
2019-07-19 11:47 ` Liviu Dudau
2019-08-12 23:19 ` Rob Herring
2019-08-14 6:35 ` [EXT] " Wen He
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).