* [RFC PATCH V2 0/6] media: platform: Add support for Digital Image Processing (DIP) on mt8183 SoC
@ 2019-07-08 11:04 frederic.chen-NuS5LvNUpcJWk0Htik3J/w
[not found] ` <20190708110500.7242-1-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
0 siblings, 1 reply; 12+ messages in thread
From: frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-08 11:04 UTC (permalink / raw)
To: hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w,
laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw,
tfiga-F7+t8E8rja9g9hUCZPvPmw,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w,
mchehab-DgEjT+Ai2ygdnm+yROfE0A
Cc: shik-F7+t8E8rja9g9hUCZPvPmw, devicetree-u79uwXL29TY76Z2rM5mHXA,
Sean.Cheng-NuS5LvNUpcJWk0Htik3J/w,
Rynn.Wu-NuS5LvNUpcJWk0Htik3J/w,
Allan.Yang-NuS5LvNUpcJWk0Htik3J/w,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w,
holmes.chiou-NuS5LvNUpcJWk0Htik3J/w,
suleiman-F7+t8E8rja9g9hUCZPvPmw,
Jerry-ch.Chen-NuS5LvNUpcJWk0Htik3J/w,
jungo.lin-NuS5LvNUpcJWk0Htik3J/w,
sj.huang-NuS5LvNUpcJWk0Htik3J/w, yuzhao-F7+t8E8rja9g9hUCZPvPmw,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
zwisler-F7+t8E8rja9g9hUCZPvPmw,
christie.yu-NuS5LvNUpcJWk0Htik3J/w,
frederic.chen-NuS5LvNUpcJWk0Htik3J/w,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-media-u79uwXL29TY76Z2rM5mHXA
Hello,
This RFC patch series added Digital Image Processing (DIP) driver on Mediatek
mt8183 SoC. It belongs to the Mediatek's ISP driver series based on V4L2 and
media controller framework. I posted the main part of the DIP driver as RFC to
discuss first and would like some review comments.
I appreciate the helpful comment of Tomasz, Rob and Shik in RFC V1. The RFC V2
patch addressed on the review issues in V1. There are 2 V4L2 compliance test
issues still under discussion and I will do the corresponding modification in
the next patch after we come to the conclusion.
1. Request API test doesn't know which buffers of the video devices are
required so we got failed in testRequests()
2. V4L2 compliance test check if the driver return error when passing an
invalid image size, but in vb2_create_bufs() case, we don't know if the
size check is required or not.
Please see the following URL for the detail.
http://lists.infradead.org/pipermail/linux-mediatek/2019-June/020884.html
==============
Introduction
==============
Digital Image Processing (DIP) unit can accept the tuning parameters and
adjust the image content in Mediatek ISP system. Furthermore, it performs
demosaicing and noise reduction on the image to support the advanced camera
features of the application. The DIP driver also support image format
conversion, resizing and rotation with its hardware path.
The driver is implemented with V4L2 and media controller framework. We
have the following entities describing the DIP path. Since a DIP frame has
multiple buffers, the driver uses Request API to control the multiple
buffer's enqueue flow.
1. Meta (output video device): connects to DIP sub device. It accepts the
input tuning buffer from userspace. The metadata interface used currently
is only a temporary solution to kick off driver development and is not
ready for reviewed yet.
2. RAW (output video device): connects to DIP sub device. It accepts input
image buffer from userspace.
3. DIP (sub device): connects to MDP-0 and MDP-1. When processing an image,
DIP hardware support multiple output images with different size and format
so it needs two capture video devices to return the streaming data to the
user.
4. MDP-0 (capture video device): return the processed image data.
5. MDP-1 (capture video device): return the processed image data, the
image size and format can be different from the ones of MDP-0.
The overall file structure of the DIP driver is as following:
* mtk_dip-v4l2.c: implements DIP platform driver, V4L2 and vb2 operations.
* mtk_dip-sys.c: implements the hardware job handling flow including the part of
interaction with the SCP and MDP.
* mtk_dip-dev.c: implements dip pipe utilities. DIP driver supports 3 software
pipes (preview, capture and reprocessing) at the same time. All
the pipes share the same DIP hardware to process the images.
==================
Changes in v2
==================
* mtk_dip-smem.c
1. Removed mtk_dip-smem.c and the custom code of SCP and DIP's share memory
operation, and uses SCP device as the allocation device instead. (SCP creates
the shared DMA pool of DMA buffers and can hook to DMA mapping APIs)
* mtk_dip-ctrl.c
1. Merged mtk_dip-ctrl.c into mtk_dip-v4l2.c since we only have a HW ctrl.
(V4L2_CID_ROTATE)
* mtk_dip-sys.c:
1. Removed struct mtk_dip_hw_work, mtk_dip_hw_submit_work and the related memory
management flow (use mtk_dip_request instead)
2. Uses workqueue mdp_wq instead of dip_runner_thread kthread to simplify the
design
3. Removed dip_gcejoblist and use mtk_dip_job_info list instead
4. Removed framejob and mtk_dip_hw_mdpcb_work and the related alloc and free
since it already embedded in the new struct mtk_dip_request
5. Integrated struct mtk_dip_hw_user_id and struct with mtk_dip_pipe, and
removed dip_hw->dip_useridlist
6. Pass mtk_dip_request to mdp_cmdq_sendtask() as cb data
7. Use spinlock instead of mutex as struct mtk_dip_hw_queue's queuelock so that
we can use direct function call instead of mdpcb_workqueue works
8. Removed dip_send() and use scp_ipi_send() directly
9. Removed composing_wq and the related macro, we use semaphore instead
10. Use array to keep constant number of working buffer pointers in dip_hw
instead a list
11. Allocates the SCP working buffer before scheduling the job into SCP. When
there is no free buffer, we hold the job until there are any working buffers
available.
12. Re-designed the request handling flow. We implement
mtk_dip_vb2_request_validate() to collect the job data including buffers and
check if we got minimum required buffers. mtk_dip_pipe_try_enqueue() is added to
simplify the job scheduling flow in both streamon() case with buffers already in
queues and .buf_queue() during streaming. In streamon() function, we call
mtk_dip_pipe_try_enqueue() to execute as many as jobs in the pending list
13. Fixed the issue about passing the kernel pointer to SCP
14. Re-designed mtk_dip_hw_flush_by_id() to remove the unnecessary loop and
interrupt abort
15. Added codes to wait for pending jobs already in SCP during suspend flow. In
mtk_dip_suspend() and dip_submit_worker(), we get mutex hw_op_lock before read
and update the SCP job number to avoid the race condition when system suspend
happens and DIP driver is sending ipi command to trigger the firmware job.
16. Removed struct mtk_dip_hw's dip_user_cnt and dip_state, and uses
dip_stream_cnt instead
17. Uses dma_alloc_coherent() instead of scp_get_reserve_mem_phys()/
scp_get_reserve_mem_size() to allocate DIP working buffers
* mtk_dip-v4l2.c:
1. Call mtk_dip_hw_stream{on, off} in mtk_dip_subdev_s_stream() directly instead
mtk_dip_pipe_stream_on and mtk_dip_pipe_stream_off
2. Removed buf usage HW ctrl and uses dma port configured in node's description
instead
3. Moved platform driver ops to mtk_dip-v4l2.c (which includes the V4L2/media
ops implementation)
4. Moved hardware related operation in sub-device open/close to
streamon()/streamoff() ops
5. Uses dip_pipe->lock to synchronize streamon, streamoff and link setup flow
6. Added a counter dip_pipe->cnt_nodes_not_streaming to check if the pipe can be
streamon or not (instead of the mtk_dip_all_nodes_streaming())
7. Moved the buffer size checking code from .queue_setup() to .buf_prepare()
8. Added multiple-plane formats support
9. Created interfaces and interface links for input and output video nodes
10. Added error handling and improved the cleanup codes in
mtk_dip_dev_v4l2_init() and mtk_dip_pipe_v4l2_register()
11. Added mtk_dip_video_device_v4l2_register() to simplify
mtk_dip_pipe_v4l2_register()'s implementation
12. Added mtk_dip_video_device.flags instead of enable, dynamic and immutable
fields in struct mtk_dip_video_device.
13. Added a list to mtk_dip_video_device to hold queued buffers instead of
accessing vbq.bufs directly.
14. Merged struct mtk_dip_dev_meta_format and struct mtk_dip_dev_mdp_format into
struct mtk_dip_dev_format
15. Changed the try_fmt() implementation. If the pixelformat is not supported,
we use the default one but keep the valid fields.
16. Moved the mtk_dip_hw_connect()/mtk_dip_hw_disconnect() call from
mtk_dip_subdev_s_stream() to mtk_dip_hw_streamon()/mtk_dip_hw_streamoff() and
removed some redundant check about stream count.
17. Re-implemented dev_pm_ops
* mtk_dip-dev.c:
1. Added mtk_dip_request extending media_request and embedded pipe_job_info in
it.
2. Removed mtk_dip_pipe_stream{on, off} and move the content to
mtk_dip_hw_stream{on, off}
3. Removed fill_ipi_img_param() and extends fill_ipi_img_param_mp() so that it
can support both multiple non-contiguous and multiple contiguous planes buffers.
4. Added mtk_dip_pipe_get_stride() to reduce redundant codes.
5. Removed call_mtk_dip_pipe_finish() and merged its content into its callers
6. Removed unused ctrl handler from struct mtk_dip_pipe.
==================
Changes in v1
==================
1. Uses Request API instead of DIP's buffer collection design
2. Removed unnecessary abstraction structurally, including mtk_dip_ctx and
related ops
3. Removed the dip_smem node from device tree
4. Improved the dip_work list's management flow
5. Fixed the common issues Tomasz commented on Mediatek ISP Pass 1's RFC v0
patch series
==================
Dependent patch
==================
DIP driver depends on MDP 3 driver and SCP driver. The patches are as
following:
[1]. support mdp3 on mt8183 platform
https://patchwork.kernel.org/cover/10945585/
[2]. Add support for mt8183 SCP
https://patchwork.kernel.org/cover/11027245/
==================
Compliance test
==================
* Test command: v4l2-compliance -m /dev/media0
* test output:
v4l2-compliance SHA: not available, 32 bits
Compliance test for camera-dip device /dev/media0:
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Required ioctls:
test MEDIA_IOC_DEVICE_INFO: OK
Allow for multiple opens:
test second /dev/media0 open: OK
test MEDIA_IOC_DEVICE_INFO: OK
test for unlimited opens: OK
Media Controller ioctls:
test MEDIA_IOC_G_TOPOLOGY: OK
Entities: 15 Interfaces: 27 Pads: 24 Links: 39
test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK
test MEDIA_IOC_SETUP_LINK: OK
Total for camera-dip device /dev/media0: 7, Succeeded: 7, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for camera-dip device /dev/v4l-subdev0:
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000006
Type : V4L Sub-Device
Entity Info:
ID : 0x00000001 (1)
Name : MTK-ISP-DIP-V4L2
Function : Video Pixel Formatter
Pad 0x01000002 : 0: Sink
Link 0x0200000c: from remote pad 0x1000009 of entity 'MTK-ISP-DIP-V4L2 Raw Input': Data, Enabled
Pad 0x01000003 : 1: Sink
Link 0x02000014: from remote pad 0x1000011 of entity 'MTK-ISP-DIP-V4L2 Tuning': Data
Pad 0x01000004 : 2: Source
Link 0x0200001c: to remote pad 0x1000019 of entity 'MTK-ISP-DIP-V4L2 MDP0': Data, Enabled, Dynamic
Pad 0x01000005 : 3: Source
Link 0x02000024: to remote pad 0x1000021 of entity 'MTK-ISP-DIP-V4L2 MDP1': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
Allow for multiple opens:
test second /dev/v4l-subdev0 open: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Sub-Device ioctls (Sink Pad 0):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Sink Pad 1):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 2):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 3):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
Total for camera-dip device /dev/v4l-subdev0: 69, Succeeded: 69, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-V4L device /dev/video0:
Driver Info:
Driver name : MTK-ISP-DIP-V4L
Card type : MTK-ISP-DIP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84202000
Video Output Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04202000
Video Output Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x0300000a
Type : V4L Video
Entity Info:
ID : 0x00000008 (8)
Name : MTK-ISP-DIP-V4L2 Raw Input
Function : V4L2 I/O
Pad 0x01000009 : 0: Source
Link 0x0200000c: to remote pad 0x1000002 of entity 'MTK-ISP-DIP-V4L2': Data, Enabled
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-V4L device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-V4L device /dev/video0:
Driver Info:
Driver name : MTK-ISP-DIP-V4L
Card type : MTK-ISP-DIP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84202000
Video Output Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04202000
Video Output Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x0300000a
Type : V4L Video
Entity Info:
ID : 0x00000008 (8)
Name : MTK-ISP-DIP-V4L2 Raw Input
Function : V4L2 I/O
Pad 0x01000009 : 0: Source
Link 0x0200000c: to remote pad 0x1000002 of entity 'MTK-ISP-DIP-V4L2': Data, Enabled
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-V4L device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-V4L device /dev/video1:
Driver Info:
Driver name : MTK-ISP-DIP-V4L
Card type : MTK-ISP-DIP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x8c200000
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x0c200000
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000012
Type : V4L Video
Entity Info:
ID : 0x00000010 (16)
Name : MTK-ISP-DIP-V4L2 Tuning
Function : V4L2 I/O
Pad 0x01000011 : 0: Source
Link 0x02000014: to remote pad 0x1000003 of entity 'MTK-ISP-DIP-V4L2': Data
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video1 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-V4L device /dev/video1: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-V4L device /dev/video1:
Driver Info:
Driver name : MTK-ISP-DIP-V4L
Card type : MTK-ISP-DIP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x8c200000
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x0c200000
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000012
Type : V4L Video
Entity Info:
ID : 0x00000010 (16)
Name : MTK-ISP-DIP-V4L2 Tuning
Function : V4L2 I/O
Pad 0x01000011 : 0: Source
Link 0x02000014: to remote pad 0x1000003 of entity 'MTK-ISP-DIP-V4L2': Data
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video1 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-V4L device /dev/video1: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-V4L device /dev/video2:
Driver Info:
Driver name : MTK-ISP-DIP-V4L
Card type : MTK-ISP-DIP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x0300001a
Type : V4L Video
Entity Info:
ID : 0x00000018 (24)
Name : MTK-ISP-DIP-V4L2 MDP0
Function : V4L2 I/O
Pad 0x01000019 : 0: Sink
Link 0x0200001c: from remote pad 0x1000004 of entity 'MTK-ISP-DIP-V4L2': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video2 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-V4L device /dev/video2: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-V4L device /dev/video2:
Driver Info:
Driver name : MTK-ISP-DIP-V4L
Card type : MTK-ISP-DIP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x0300001a
Type : V4L Video
Entity Info:
ID : 0x00000018 (24)
Name : MTK-ISP-DIP-V4L2 MDP0
Function : V4L2 I/O
Pad 0x01000019 : 0: Sink
Link 0x0200001c: from remote pad 0x1000004 of entity 'MTK-ISP-DIP-V4L2': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video2 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-V4L device /dev/video2: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-V4L device /dev/video3:
Driver Info:
Driver name : MTK-ISP-DIP-V4L
Card type : MTK-ISP-DIP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000022
Type : V4L Video
Entity Info:
ID : 0x00000020 (32)
Name : MTK-ISP-DIP-V4L2 MDP1
Function : V4L2 I/O
Pad 0x01000021 : 0: Sink
Link 0x02000024: from remote pad 0x1000005 of entity 'MTK-ISP-DIP-V4L2': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video3 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-V4L device /dev/video3: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-V4L device /dev/video3:
Driver Info:
Driver name : MTK-ISP-DIP-V4L
Card type : MTK-ISP-DIP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000022
Type : V4L Video
Entity Info:
ID : 0x00000020 (32)
Name : MTK-ISP-DIP-V4L2 MDP1
Function : V4L2 I/O
Pad 0x01000021 : 0: Sink
Link 0x02000024: from remote pad 0x1000005 of entity 'MTK-ISP-DIP-V4L2': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video3 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-V4L device /dev/video3: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for camera-dip device /dev/v4l-subdev1:
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x0300002d
Type : V4L Sub-Device
Entity Info:
ID : 0x00000028 (40)
Name : MTK-ISP-DIP-CAP-V4L2
Function : Video Pixel Formatter
Pad 0x01000029 : 0: Sink
Link 0x02000033: from remote pad 0x1000030 of entity 'MTK-ISP-DIP-CAP-V4L2 Raw Input': Data, Enabled
Pad 0x0100002a : 1: Sink
Link 0x0200003b: from remote pad 0x1000038 of entity 'MTK-ISP-DIP-CAP-V4L2 Tuning': Data
Pad 0x0100002b : 2: Source
Link 0x02000043: to remote pad 0x1000040 of entity 'MTK-ISP-DIP-CAP-V4L2 MDP0': Data, Enabled, Dynamic
Pad 0x0100002c : 3: Source
Link 0x0200004b: to remote pad 0x1000048 of entity 'MTK-ISP-DIP-CAP-V4L2 MDP1': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
Allow for multiple opens:
test second /dev/v4l-subdev1 open: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Sub-Device ioctls (Sink Pad 0):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Sink Pad 1):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 2):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 3):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
Total for camera-dip device /dev/v4l-subdev1: 69, Succeeded: 69, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-CAP device /dev/video4:
Driver Info:
Driver name : MTK-ISP-DIP-CAP
Card type : MTK-ISP-DIP-CAP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84202000
Video Output Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04202000
Video Output Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000031
Type : V4L Video
Entity Info:
ID : 0x0000002f (47)
Name : MTK-ISP-DIP-CAP-V4L2 Raw Input
Function : V4L2 I/O
Pad 0x01000030 : 0: Source
Link 0x02000033: to remote pad 0x1000029 of entity 'MTK-ISP-DIP-CAP-V4L2': Data, Enabled
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video4 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-CAP device /dev/video4: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-CAP device /dev/video4:
Driver Info:
Driver name : MTK-ISP-DIP-CAP
Card type : MTK-ISP-DIP-CAP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84202000
Video Output Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04202000
Video Output Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000031
Type : V4L Video
Entity Info:
ID : 0x0000002f (47)
Name : MTK-ISP-DIP-CAP-V4L2 Raw Input
Function : V4L2 I/O
Pad 0x01000030 : 0: Source
Link 0x02000033: to remote pad 0x1000029 of entity 'MTK-ISP-DIP-CAP-V4L2': Data, Enabled
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video4 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-CAP device /dev/video4: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-CAP device /dev/video5:
Driver Info:
Driver name : MTK-ISP-DIP-CAP
Card type : MTK-ISP-DIP-CAP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x8c200000
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x0c200000
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000039
Type : V4L Video
Entity Info:
ID : 0x00000037 (55)
Name : MTK-ISP-DIP-CAP-V4L2 Tuning
Function : V4L2 I/O
Pad 0x01000038 : 0: Source
Link 0x0200003b: to remote pad 0x100002a of entity 'MTK-ISP-DIP-CAP-V4L2': Data
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video5 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-CAP device /dev/video5: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-CAP device /dev/video5:
Driver Info:
Driver name : MTK-ISP-DIP-CAP
Card type : MTK-ISP-DIP-CAP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x8c200000
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x0c200000
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000039
Type : V4L Video
Entity Info:
ID : 0x00000037 (55)
Name : MTK-ISP-DIP-CAP-V4L2 Tuning
Function : V4L2 I/O
Pad 0x01000038 : 0: Source
Link 0x0200003b: to remote pad 0x100002a of entity 'MTK-ISP-DIP-CAP-V4L2': Data
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video5 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-CAP device /dev/video5: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-CAP device /dev/video6:
Driver Info:
Driver name : MTK-ISP-DIP-CAP
Card type : MTK-ISP-DIP-CAP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000041
Type : V4L Video
Entity Info:
ID : 0x0000003f (63)
Name : MTK-ISP-DIP-CAP-V4L2 MDP0
Function : V4L2 I/O
Pad 0x01000040 : 0: Sink
Link 0x02000043: from remote pad 0x100002b of entity 'MTK-ISP-DIP-CAP-V4L2': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video6 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-CAP device /dev/video6: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-CAP device /dev/video6:
Driver Info:
Driver name : MTK-ISP-DIP-CAP
Card type : MTK-ISP-DIP-CAP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000041
Type : V4L Video
Entity Info:
ID : 0x0000003f (63)
Name : MTK-ISP-DIP-CAP-V4L2 MDP0
Function : V4L2 I/O
Pad 0x01000040 : 0: Sink
Link 0x02000043: from remote pad 0x100002b of entity 'MTK-ISP-DIP-CAP-V4L2': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video6 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-CAP device /dev/video6: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-CAP device /dev/video7:
Driver Info:
Driver name : MTK-ISP-DIP-CAP
Card type : MTK-ISP-DIP-CAP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000049
Type : V4L Video
Entity Info:
ID : 0x00000047 (71)
Name : MTK-ISP-DIP-CAP-V4L2 MDP1
Function : V4L2 I/O
Pad 0x01000048 : 0: Sink
Link 0x0200004b: from remote pad 0x100002c of entity 'MTK-ISP-DIP-CAP-V4L2': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video7 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-CAP device /dev/video7: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-CAP device /dev/video7:
Driver Info:
Driver name : MTK-ISP-DIP-CAP
Card type : MTK-ISP-DIP-CAP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000049
Type : V4L Video
Entity Info:
ID : 0x00000047 (71)
Name : MTK-ISP-DIP-CAP-V4L2 MDP1
Function : V4L2 I/O
Pad 0x01000048 : 0: Sink
Link 0x0200004b: from remote pad 0x100002c of entity 'MTK-ISP-DIP-CAP-V4L2': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video7 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-CAP device /dev/video7: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for camera-dip device /dev/v4l-subdev2:
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000054
Type : V4L Sub-Device
Entity Info:
ID : 0x0000004f (79)
Name : MTK-ISP-DIP-REP-V4L2
Function : Video Pixel Formatter
Pad 0x01000050 : 0: Sink
Link 0x0200005a: from remote pad 0x1000057 of entity 'MTK-ISP-DIP-REP-V4L2 Raw Input': Data, Enabled
Pad 0x01000051 : 1: Sink
Link 0x02000062: from remote pad 0x100005f of entity 'MTK-ISP-DIP-REP-V4L2 Tuning': Data
Pad 0x01000052 : 2: Source
Link 0x0200006a: to remote pad 0x1000067 of entity 'MTK-ISP-DIP-REP-V4L2 MDP0': Data, Enabled, Dynamic
Pad 0x01000053 : 3: Source
Link 0x02000072: to remote pad 0x100006f of entity 'MTK-ISP-DIP-REP-V4L2 MDP1': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
Allow for multiple opens:
test second /dev/v4l-subdev2 open: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Sub-Device ioctls (Sink Pad 0):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Sink Pad 1):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 2):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Sub-Device ioctls (Source Pad 3):
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported)
test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported)
test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
Total for camera-dip device /dev/v4l-subdev2: 69, Succeeded: 69, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-REP device /dev/video8:
Driver Info:
Driver name : MTK-ISP-DIP-REP
Card type : MTK-ISP-DIP-REP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84202000
Video Output Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04202000
Video Output Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000058
Type : V4L Video
Entity Info:
ID : 0x00000056 (86)
Name : MTK-ISP-DIP-REP-V4L2 Raw Input
Function : V4L2 I/O
Pad 0x01000057 : 0: Source
Link 0x0200005a: to remote pad 0x1000050 of entity 'MTK-ISP-DIP-REP-V4L2': Data, Enabled
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video8 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-REP device /dev/video8: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-REP device /dev/video8:
Driver Info:
Driver name : MTK-ISP-DIP-REP
Card type : MTK-ISP-DIP-REP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84202000
Video Output Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04202000
Video Output Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000058
Type : V4L Video
Entity Info:
ID : 0x00000056 (86)
Name : MTK-ISP-DIP-REP-V4L2 Raw Input
Function : V4L2 I/O
Pad 0x01000057 : 0: Source
Link 0x0200005a: to remote pad 0x1000050 of entity 'MTK-ISP-DIP-REP-V4L2': Data, Enabled
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video8 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-REP device /dev/video8: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-REP device /dev/video9:
Driver Info:
Driver name : MTK-ISP-DIP-REP
Card type : MTK-ISP-DIP-REP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x8c200000
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x0c200000
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000060
Type : V4L Video
Entity Info:
ID : 0x0000005e (94)
Name : MTK-ISP-DIP-REP-V4L2 Tuning
Function : V4L2 I/O
Pad 0x0100005f : 0: Source
Link 0x02000062: to remote pad 0x1000051 of entity 'MTK-ISP-DIP-REP-V4L2': Data
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video9 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-REP device /dev/video9: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-REP device /dev/video9:
Driver Info:
Driver name : MTK-ISP-DIP-REP
Card type : MTK-ISP-DIP-REP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x8c200000
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x0c200000
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000060
Type : V4L Video
Entity Info:
ID : 0x0000005e (94)
Name : MTK-ISP-DIP-REP-V4L2 Tuning
Function : V4L2 I/O
Pad 0x0100005f : 0: Source
Link 0x02000062: to remote pad 0x1000051 of entity 'MTK-ISP-DIP-REP-V4L2': Data
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video9 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-REP device /dev/video9: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-REP device /dev/video10:
Driver Info:
Driver name : MTK-ISP-DIP-REP
Card type : MTK-ISP-DIP-REP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000068
Type : V4L Video
Entity Info:
ID : 0x00000066 (102)
Name : MTK-ISP-DIP-REP-V4L2 MDP0
Function : V4L2 I/O
Pad 0x01000067 : 0: Sink
Link 0x0200006a: from remote pad 0x1000052 of entity 'MTK-ISP-DIP-REP-V4L2': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video10 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-REP device /dev/video10: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-REP device /dev/video10:
Driver Info:
Driver name : MTK-ISP-DIP-REP
Card type : MTK-ISP-DIP-REP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000068
Type : V4L Video
Entity Info:
ID : 0x00000066 (102)
Name : MTK-ISP-DIP-REP-V4L2 MDP0
Function : V4L2 I/O
Pad 0x01000067 : 0: Sink
Link 0x0200006a: from remote pad 0x1000052 of entity 'MTK-ISP-DIP-REP-V4L2': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video10 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-REP device /dev/video10: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-REP device /dev/video11:
Driver Info:
Driver name : MTK-ISP-DIP-REP
Card type : MTK-ISP-DIP-REP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000070
Type : V4L Video
Entity Info:
ID : 0x0000006e (110)
Name : MTK-ISP-DIP-REP-V4L2 MDP1
Function : V4L2 I/O
Pad 0x0100006f : 0: Sink
Link 0x02000072: from remote pad 0x1000053 of entity 'MTK-ISP-DIP-REP-V4L2': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video11 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-REP device /dev/video11: 45, Succeeded: 45, Failed: 0, Warnings: 0
--------------------------------------------------------------------------------
Compliance test for MTK-ISP-DIP-REP device /dev/video11:
Driver Info:
Driver name : MTK-ISP-DIP-REP
Card type : MTK-ISP-DIP-REP-V4L2
Bus info : platform:15022000.dip
Driver version : 4.19.56
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Media Driver Info:
Driver name : camera-dip
Model : MTK-ISP-DIP-V4L2
Serial :
Bus info : platform:15022000.dip
Media version : 4.19.56
Hardware revision: 0x00000000 (0)
Driver version : 4.19.56
Interface Info:
ID : 0x03000070
Type : V4L Video
Entity Info:
ID : 0x0000006e (110)
Name : MTK-ISP-DIP-REP-V4L2 MDP1
Function : V4L2 I/O
Pad 0x0100006f : 0: Sink
Link 0x02000072: from remote pad 0x1000053 of entity 'MTK-ISP-DIP-REP-V4L2': Data, Enabled, Dynamic
Required ioctls:
test MC information (see 'Media Driver Info' above): OK
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video11 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK
Total for MTK-ISP-DIP-REP device /dev/video11: 45, Succeeded: 45, Failed: 0, Warnings: 0
Grand Total for camera-dip device /dev/media0: 1294, Succeeded: 1294, Failed: 0, Warnings: 0
Frederic Chen (6):
dt-bindings: mt8183: Added DIP dt-bindings
dts: arm64: mt8183: Add DIP nodes
media: platform: Add Mediatek DIP driver KConfig
platform: mtk-isp: Add Mediatek DIP driver
remoteproc/mediatek: add SCP's shared dma pool support for mt8183
media: platform: mtk-mdp3: Added struct tuning_addr
.../bindings/media/mediatek,mt8183-dip.txt | 40 +
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 16 +
drivers/media/platform/Kconfig | 2 +
drivers/media/platform/mtk-isp/Kconfig | 21 +
drivers/media/platform/mtk-isp/Makefile | 18 +
.../media/platform/mtk-isp/isp_50/Makefile | 4 +
.../platform/mtk-isp/isp_50/dip/Makefile | 18 +
.../platform/mtk-isp/isp_50/dip/mtk_dip-dev.c | 769 +++++++
.../platform/mtk-isp/isp_50/dip/mtk_dip-dev.h | 337 ++++
.../platform/mtk-isp/isp_50/dip/mtk_dip-hw.h | 155 ++
.../platform/mtk-isp/isp_50/dip/mtk_dip-sys.c | 794 ++++++++
.../mtk-isp/isp_50/dip/mtk_dip-v4l2.c | 1786 +++++++++++++++++
drivers/media/platform/mtk-mdp3/mtk-img-ipi.h | 8 +-
drivers/remoteproc/mtk_scp.c | 54 +-
14 files changed, 4000 insertions(+), 22 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8183-dip.txt
create mode 100644 drivers/media/platform/mtk-isp/Kconfig
create mode 100644 drivers/media/platform/mtk-isp/Makefile
create mode 100644 drivers/media/platform/mtk-isp/isp_50/Makefile
create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/Makefile
create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c
create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h
create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h
create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c
create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c
--
2.18.0
^ permalink raw reply [flat|nested] 12+ messages in thread[parent not found: <20190708110500.7242-1-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>]
* [RFC PATCH V2 1/6] dt-bindings: mt8183: Added DIP dt-bindings [not found] ` <20190708110500.7242-1-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> @ 2019-07-08 11:04 ` frederic.chen-NuS5LvNUpcJWk0Htik3J/w 2019-07-24 16:49 ` Rob Herring 2019-07-08 11:04 ` [RFC PATCH V2 2/6] dts: arm64: mt8183: Add DIP nodes frederic.chen-NuS5LvNUpcJWk0Htik3J/w ` (5 subsequent siblings) 6 siblings, 1 reply; 12+ messages in thread From: frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-08 11:04 UTC (permalink / raw) To: hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w, laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw, tfiga-F7+t8E8rja9g9hUCZPvPmw, matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mchehab-DgEjT+Ai2ygdnm+yROfE0A Cc: shik-F7+t8E8rja9g9hUCZPvPmw, devicetree-u79uwXL29TY76Z2rM5mHXA, Sean.Cheng-NuS5LvNUpcJWk0Htik3J/w, Rynn.Wu-NuS5LvNUpcJWk0Htik3J/w, Allan.Yang-NuS5LvNUpcJWk0Htik3J/w, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, holmes.chiou-NuS5LvNUpcJWk0Htik3J/w, suleiman-F7+t8E8rja9g9hUCZPvPmw, Jerry-ch.Chen-NuS5LvNUpcJWk0Htik3J/w, jungo.lin-NuS5LvNUpcJWk0Htik3J/w, sj.huang-NuS5LvNUpcJWk0Htik3J/w, yuzhao-F7+t8E8rja9g9hUCZPvPmw, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, zwisler-F7+t8E8rja9g9hUCZPvPmw, christie.yu-NuS5LvNUpcJWk0Htik3J/w, frederic.chen-NuS5LvNUpcJWk0Htik3J/w, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-media-u79uwXL29TY76Z2rM5mHXA From: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> This patch adds DT binding documentation for the Digital Image Processing (DIP) unit of camera ISP system on Mediatek's SoCs. It depends on the SCP and MDP 3 patch as following: 1. dt-bindings: Add a binding for Mediatek SCP https://patchwork.kernel.org/patch/11027247/ 2. dt-binding: mt8183: Add Mediatek MDP3 dt-bindings https://patchwork.kernel.org/patch/10945603/ Signed-off-by: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- .../bindings/media/mediatek,mt8183-dip.txt | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8183-dip.txt diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8183-dip.txt b/Documentation/devicetree/bindings/media/mediatek,mt8183-dip.txt new file mode 100644 index 000000000000..3a0435513089 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mt8183-dip.txt @@ -0,0 +1,40 @@ +* Mediatek Digital Image Processor (DIP) + +Digital Image Processor (DIP) unit in Mediatek ISP system is responsible for +image content adjustment according to the tuning parameters. DIP can process +the image form memory buffer and output the processed image to multiple output +buffers. Furthermore, it can support demosaicing and noise reduction on the +images. + +Required properties: +- compatible: "mediatek,mt8183-dip" +- reg: Physical base address and length of the function block register space +- interrupts: interrupt number to the cpu +- iommus: should point to the respective IOMMU block with master port as + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt + for details. +- mediatek,mdp3: should point to the respective mdp block. DIP hardware + connects to MDP and we can get the processed image with both effect of the + two blocks. +- mediatek,larb: must contain the local arbiters in the current SoCs, see + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + for details. +- mediatek,scp: should point to the scp node since the we use SCP + coprocessor to control DIP hardware +- clocks: must contain the local arbiters 5 (LARB5) and DIP clock +- clock-names: must contain "larb5" and "dip" + +Example: + dip: dip@15022000 { + compatible = "mediatek,mt8183-dip"; + mediatek,larb = <&larb5>; + mediatek,mdp3 = <&mdp_rdma0>; + mediatek,scp = <&scp>; + iommus = <&iommu M4U_PORT_CAM_IMGI>; + reg = <0 0x15022000 0 0x6000>; + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_LARB5>, + <&imgsys CLK_IMG_DIP>; + clock-names = "larb5", + "dip"; + }; -- 2.18.0 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [RFC PATCH V2 1/6] dt-bindings: mt8183: Added DIP dt-bindings 2019-07-08 11:04 ` [RFC PATCH V2 1/6] dt-bindings: mt8183: Added DIP dt-bindings frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-24 16:49 ` Rob Herring 0 siblings, 0 replies; 12+ messages in thread From: Rob Herring @ 2019-07-24 16:49 UTC (permalink / raw) Cc: laurent.pinchart+renesas, Rynn.Wu, Allan.Yang, suleiman, Jerry-ch.Chen, jungo.lin, hans.verkuil, frederic.chen, linux-media, devicetree, holmes.chiou, shik, yuzhao, linux-mediatek, matthias.bgg, mchehab, linux-arm-kernel, Sean.Cheng, srv_heupstream, sj.huang, tfiga, christie.yu, zwisler On Mon, 8 Jul 2019 19:04:55 +0800, <frederic.chen@mediatek.com> wrote: > From: Frederic Chen <frederic.chen@mediatek.com> > > This patch adds DT binding documentation for the Digital Image > Processing (DIP) unit of camera ISP system on Mediatek's SoCs. > > It depends on the SCP and MDP 3 patch as following: > > 1. dt-bindings: Add a binding for Mediatek SCP > https://patchwork.kernel.org/patch/11027247/ > 2. dt-binding: mt8183: Add Mediatek MDP3 dt-bindings > https://patchwork.kernel.org/patch/10945603/ > > Signed-off-by: Frederic Chen <frederic.chen@mediatek.com> > --- > .../bindings/media/mediatek,mt8183-dip.txt | 40 +++++++++++++++++++ > 1 file changed, 40 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8183-dip.txt > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 12+ messages in thread
* [RFC PATCH V2 2/6] dts: arm64: mt8183: Add DIP nodes [not found] ` <20190708110500.7242-1-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> 2019-07-08 11:04 ` [RFC PATCH V2 1/6] dt-bindings: mt8183: Added DIP dt-bindings frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-08 11:04 ` frederic.chen-NuS5LvNUpcJWk0Htik3J/w 2019-07-08 11:04 ` [RFC PATCH V2 3/6] media: platform: Add Mediatek DIP driver KConfig frederic.chen-NuS5LvNUpcJWk0Htik3J/w ` (4 subsequent siblings) 6 siblings, 0 replies; 12+ messages in thread From: frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-08 11:04 UTC (permalink / raw) To: hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w, laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw, tfiga-F7+t8E8rja9g9hUCZPvPmw, matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mchehab-DgEjT+Ai2ygdnm+yROfE0A Cc: shik-F7+t8E8rja9g9hUCZPvPmw, devicetree-u79uwXL29TY76Z2rM5mHXA, Sean.Cheng-NuS5LvNUpcJWk0Htik3J/w, Rynn.Wu-NuS5LvNUpcJWk0Htik3J/w, Allan.Yang-NuS5LvNUpcJWk0Htik3J/w, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, holmes.chiou-NuS5LvNUpcJWk0Htik3J/w, suleiman-F7+t8E8rja9g9hUCZPvPmw, Jerry-ch.Chen-NuS5LvNUpcJWk0Htik3J/w, jungo.lin-NuS5LvNUpcJWk0Htik3J/w, sj.huang-NuS5LvNUpcJWk0Htik3J/w, yuzhao-F7+t8E8rja9g9hUCZPvPmw, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, zwisler-F7+t8E8rja9g9hUCZPvPmw, christie.yu-NuS5LvNUpcJWk0Htik3J/w, frederic.chen-NuS5LvNUpcJWk0Htik3J/w, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-media-u79uwXL29TY76Z2rM5mHXA From: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> This patch adds nodes for Digital Image Processing (DIP). DIP is embedded in Mediatek SoCs and works with the co-processor to adjust image content according to tuning input data. It also provides image format conversion, resizing, and rotation features. Signed-off-by: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 0f2646c9eb65..d7b0fb8230f0 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -513,6 +513,22 @@ #clock-cells = <1>; }; + dip: dip@15022000 { + compatible = "mediatek,mt8183-dip"; + mediatek,larb = <&larb5>; + mediatek,mdp3 = <&mdp_rdma0>; + mediatek,scp = <&scp>; + iommus = <&iommu M4U_PORT_CAM_IMGI>; + reg = <0 0x15022000 0 0x6000>; + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_LOW>; + clocks = + <&imgsys CLK_IMG_LARB5>, + <&imgsys CLK_IMG_DIP>; + clock-names = + "larb5", + "dip"; + }; + vdecsys: syscon@16000000 { compatible = "mediatek,mt8183-vdecsys", "syscon"; reg = <0 0x16000000 0 0x1000>; -- 2.18.0 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RFC PATCH V2 3/6] media: platform: Add Mediatek DIP driver KConfig [not found] ` <20190708110500.7242-1-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> 2019-07-08 11:04 ` [RFC PATCH V2 1/6] dt-bindings: mt8183: Added DIP dt-bindings frederic.chen-NuS5LvNUpcJWk0Htik3J/w 2019-07-08 11:04 ` [RFC PATCH V2 2/6] dts: arm64: mt8183: Add DIP nodes frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-08 11:04 ` frederic.chen-NuS5LvNUpcJWk0Htik3J/w 2019-07-08 11:04 ` [RFC PATCH V2 4/6] platform: mtk-isp: Add Mediatek DIP driver frederic.chen-NuS5LvNUpcJWk0Htik3J/w ` (3 subsequent siblings) 6 siblings, 0 replies; 12+ messages in thread From: frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-08 11:04 UTC (permalink / raw) To: hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w, laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw, tfiga-F7+t8E8rja9g9hUCZPvPmw, matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mchehab-DgEjT+Ai2ygdnm+yROfE0A Cc: shik-F7+t8E8rja9g9hUCZPvPmw, devicetree-u79uwXL29TY76Z2rM5mHXA, Sean.Cheng-NuS5LvNUpcJWk0Htik3J/w, Rynn.Wu-NuS5LvNUpcJWk0Htik3J/w, Allan.Yang-NuS5LvNUpcJWk0Htik3J/w, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, holmes.chiou-NuS5LvNUpcJWk0Htik3J/w, suleiman-F7+t8E8rja9g9hUCZPvPmw, Jerry-ch.Chen-NuS5LvNUpcJWk0Htik3J/w, jungo.lin-NuS5LvNUpcJWk0Htik3J/w, sj.huang-NuS5LvNUpcJWk0Htik3J/w, yuzhao-F7+t8E8rja9g9hUCZPvPmw, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, zwisler-F7+t8E8rja9g9hUCZPvPmw, christie.yu-NuS5LvNUpcJWk0Htik3J/w, frederic.chen-NuS5LvNUpcJWk0Htik3J/w, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-media-u79uwXL29TY76Z2rM5mHXA From: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> This patch adds KConfig for Mediatek Digital Image Processing driver(DIP). DIP is embedded in Mediatek SoCs. It provides image format conversion, resizing, and rotation function. Signed-off-by: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- drivers/media/platform/Kconfig | 2 ++ drivers/media/platform/mtk-isp/Kconfig | 21 +++++++++++++++++++++ 2 files changed, 23 insertions(+) create mode 100644 drivers/media/platform/mtk-isp/Kconfig diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 0c725d4dcf80..b8501e1b134f 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -32,6 +32,8 @@ source "drivers/media/platform/davinci/Kconfig" source "drivers/media/platform/omap/Kconfig" +source "drivers/media/platform/mtk-isp/Kconfig" + config VIDEO_ASPEED tristate "Aspeed AST2400 and AST2500 Video Engine driver" depends on VIDEO_V4L2 diff --git a/drivers/media/platform/mtk-isp/Kconfig b/drivers/media/platform/mtk-isp/Kconfig new file mode 100644 index 000000000000..24a592022dd5 --- /dev/null +++ b/drivers/media/platform/mtk-isp/Kconfig @@ -0,0 +1,21 @@ +config VIDEO_MEDIATEK_ISP_DIP + bool "Mediatek Digital Image Processing function" + select DMA_SHARED_BUFFER + select VIDEO_V4L2_SUBDEV_API + select VIDEOBUF2_DMA_CONTIG + select VIDEOBUF2_CORE + select VIDEOBUF2_V4L2 + select VIDEOBUF2_MEMOPS + select VIDEOBUF2_VMALLOC + select MEDIA_CONTROLLER + + default n + help + Support the basic Digital Image Processing (DIP) driver. + + DIP driver provides image format conversion, resizing, + and rotation function through the low power hardware. + DIP also supports multiple output feature. It can + generate two or more output image with different effect + based on a single input image at the same time. + -- 2.18.0 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RFC PATCH V2 4/6] platform: mtk-isp: Add Mediatek DIP driver [not found] ` <20190708110500.7242-1-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> ` (2 preceding siblings ...) 2019-07-08 11:04 ` [RFC PATCH V2 3/6] media: platform: Add Mediatek DIP driver KConfig frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-08 11:04 ` frederic.chen-NuS5LvNUpcJWk0Htik3J/w [not found] ` <20190708110500.7242-5-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> 2019-07-08 11:04 ` [RFC PATCH V2 5/6] remoteproc/mediatek: add SCP's shared dma pool support for mt8183 frederic.chen-NuS5LvNUpcJWk0Htik3J/w ` (2 subsequent siblings) 6 siblings, 1 reply; 12+ messages in thread From: frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-08 11:04 UTC (permalink / raw) To: hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w, laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw, tfiga-F7+t8E8rja9g9hUCZPvPmw, matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mchehab-DgEjT+Ai2ygdnm+yROfE0A Cc: shik-F7+t8E8rja9g9hUCZPvPmw, devicetree-u79uwXL29TY76Z2rM5mHXA, Sean.Cheng-NuS5LvNUpcJWk0Htik3J/w, Rynn.Wu-NuS5LvNUpcJWk0Htik3J/w, Allan.Yang-NuS5LvNUpcJWk0Htik3J/w, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, holmes.chiou-NuS5LvNUpcJWk0Htik3J/w, suleiman-F7+t8E8rja9g9hUCZPvPmw, Jerry-ch.Chen-NuS5LvNUpcJWk0Htik3J/w, jungo.lin-NuS5LvNUpcJWk0Htik3J/w, sj.huang-NuS5LvNUpcJWk0Htik3J/w, yuzhao-F7+t8E8rja9g9hUCZPvPmw, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, zwisler-F7+t8E8rja9g9hUCZPvPmw, christie.yu-NuS5LvNUpcJWk0Htik3J/w, frederic.chen-NuS5LvNUpcJWk0Htik3J/w, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-media-u79uwXL29TY76Z2rM5mHXA From: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> This patch adds the driver of Digital Image Processing (DIP) unit in Mediatek ISP system, providing image format conversion, resizing, and rotation features. The mtk-isp directory will contain drivers for multiple IP blocks found in Mediatek ISP system. It will include ISP Pass 1 driver(CAM), sensor interface driver, DIP driver and face detection driver. Signed-off-by: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- drivers/media/platform/mtk-isp/Makefile | 7 + .../media/platform/mtk-isp/isp_50/Makefile | 7 + .../platform/mtk-isp/isp_50/dip/Makefile | 18 + .../platform/mtk-isp/isp_50/dip/mtk_dip-dev.c | 769 +++++++ .../platform/mtk-isp/isp_50/dip/mtk_dip-dev.h | 337 ++++ .../platform/mtk-isp/isp_50/dip/mtk_dip-hw.h | 155 ++ .../platform/mtk-isp/isp_50/dip/mtk_dip-sys.c | 794 ++++++++ .../mtk-isp/isp_50/dip/mtk_dip-v4l2.c | 1786 +++++++++++++++++ 8 files changed, 3873 insertions(+) create mode 100644 drivers/media/platform/mtk-isp/Makefile create mode 100644 drivers/media/platform/mtk-isp/isp_50/Makefile create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/Makefile create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c diff --git a/drivers/media/platform/mtk-isp/Makefile b/drivers/media/platform/mtk-isp/Makefile new file mode 100644 index 000000000000..b08d3bdf2800 --- /dev/null +++ b/drivers/media/platform/mtk-isp/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2019 MediaTek Inc. +# + +obj-y += isp_50/ + diff --git a/drivers/media/platform/mtk-isp/isp_50/Makefile b/drivers/media/platform/mtk-isp/isp_50/Makefile new file mode 100644 index 000000000000..564c3889c34c --- /dev/null +++ b/drivers/media/platform/mtk-isp/isp_50/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2019 MediaTek Inc. +# + +obj-$(CONFIG_VIDEO_MEDIATEK_ISP_DIP) += dip/ + diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/Makefile b/drivers/media/platform/mtk-isp/isp_50/dip/Makefile new file mode 100644 index 000000000000..99e760d7d5a9 --- /dev/null +++ b/drivers/media/platform/mtk-isp/isp_50/dip/Makefile @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2019 MediaTek Inc. +# + +$(info $(srctree)) +ccflags-y += -I$(srctree)/drivers/media/platform/mtk-mdp3 + +obj-$(CONFIG_VIDEO_MEDIATEK_ISP_DIP) += mtk_dip-v4l2.o + +# Utilities to provide frame-based streaming model +# with v4l2 user interfaces and alloc context managing +# memory shared between ISP and coprocessor +mtk_dip_util-objs := \ +mtk_dip-dev.o \ +mtk_dip-sys.o + +obj-$(CONFIG_VIDEO_MEDIATEK_ISP_DIP) += mtk_dip_util.o diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c new file mode 100644 index 000000000000..63256fa27428 --- /dev/null +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c @@ -0,0 +1,769 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 MediaTek Inc. + * + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> + * + */ + +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <media/videobuf2-dma-contig.h> +#include <media/v4l2-event.h> +#include "mtk_dip-dev.h" +#include "mtk-mdp3-regs.h" +#include "mtk-img-ipi.h" + +int mtk_dip_pipe_init(struct mtk_dip_pipe *pipe, + struct mtk_dip_dev *dip_dev, + const struct mtk_dip_pipe_desc *setting, + struct media_device *media_dev, + struct v4l2_device *v4l2_dev) +{ + int ret, i, count = 0; + + pipe->dip_dev = dip_dev; + pipe->desc = setting; + pipe->num_nodes = MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; + + atomic_set(&pipe->pipe_job_sequence, 0); + INIT_LIST_HEAD(&pipe->pipe_job_running_list); + INIT_LIST_HEAD(&pipe->pipe_job_pending_list); + spin_lock_init(&pipe->job_lock); + mutex_init(&pipe->lock); + + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) { + if (i < MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM) { + pipe->nodes[i].desc = + &pipe->desc->output_queue_descs[i]; + } else { + int cap_idx = i - MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM; + + pipe->nodes[i].desc = + &pipe->desc->capture_queue_descs[cap_idx]; + } + + pipe->nodes[i].flags = + pipe->nodes[i].desc->flags; + atomic_set(&pipe->nodes[i].sequence, 0); + spin_lock_init(&pipe->nodes[i].buf_list_lock); + INIT_LIST_HEAD(&pipe->nodes[i].buf_list); + + if (pipe->nodes[i].flags & MEDIA_LNK_FL_ENABLED) + count++; + } + + if (pipe->desc->master >= 0 && + pipe->desc->master < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM) { + if (!(pipe->nodes[pipe->desc->master].flags & + MEDIA_LNK_FL_ENABLED)) + count++; + + pipe->nodes[pipe->desc->master].flags |= + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE; + } + + atomic_set(&pipe->cnt_nodes_not_streaming, count); + + ret = mtk_dip_pipe_v4l2_register(pipe, media_dev, v4l2_dev); + if (ret) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s: failed(%d) to create V4L2 devices\n", + pipe->desc->name, ret); + + goto err_destroy_pipe_lock; + } + + return 0; + +err_destroy_pipe_lock: + mutex_destroy(&pipe->lock); + + return ret; +} + +int mtk_dip_pipe_release(struct mtk_dip_pipe *pipe) +{ + mtk_dip_pipe_v4l2_unregister(pipe); + mutex_destroy(&pipe->lock); + + return 0; +} + +int mtk_dip_pipe_next_job_id(struct mtk_dip_pipe *pipe) +{ + int global_job_id = atomic_inc_return(&pipe->pipe_job_sequence); + + return (global_job_id & 0x0000FFFF) | (pipe->desc->id << 16); +} + +struct mtk_dip_pipe_job_info* +mtk_dip_pipe_get_running_job_info(struct mtk_dip_pipe *pipe, int pipe_job_id) +{ + struct mtk_dip_pipe_job_info *job_info; + + spin_lock(&pipe->job_lock); + list_for_each_entry(job_info, + &pipe->pipe_job_running_list, list) { + if (job_info->id == pipe_job_id) { + spin_unlock(&pipe->job_lock); + return job_info; + } + } + spin_unlock(&pipe->job_lock); + + return NULL; +} + +void mtk_dip_pipe_debug_job(struct mtk_dip_pipe *pipe, + struct mtk_dip_pipe_job_info *job_info) +{ + int i; + + dev_dbg(&pipe->dip_dev->pdev->dev, "%s: pipe-job(%p),id(%d)\n", + pipe->desc->name, job_info, job_info->id); + + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM ; i++) { + if (job_info->buf_map[i]) + dev_dbg(&pipe->dip_dev->pdev->dev, "%s:%s:buf(%p)\n", + pipe->desc->name, pipe->nodes[i].desc->name, i, + job_info->buf_map[i]); + } +} + +int mtk_dip_pipe_job_finish(struct mtk_dip_pipe *pipe, + unsigned int pipe_job_info_id, + enum vb2_buffer_state vbf_state) +{ + struct mtk_dip_pipe_job_info *job_info; + struct mtk_dip_dev_buffer *in_buf; + int i, num_running_jobs; + + job_info = mtk_dip_pipe_get_running_job_info(pipe, pipe_job_info_id); + in_buf = job_info->buf_map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT]; + + spin_lock(&pipe->job_lock); + list_del(&job_info->list); + num_running_jobs = --pipe->num_jobs; + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s: num of running jobs(%d)\n", + __func__, pipe->desc->name, pipe->num_jobs); + spin_unlock(&pipe->job_lock); + + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) { + struct mtk_dip_dev_buffer *dev_buf = job_info->buf_map[i]; + struct mtk_dip_video_device *node; + + if (!dev_buf) + continue; + + if (in_buf && dev_buf != in_buf) + dev_buf->vbb.vb2_buf.timestamp = + in_buf->vbb.vb2_buf.timestamp; + + vb2_buffer_done(&dev_buf->vbb.vb2_buf, vbf_state); + + node = mtk_dip_vbq_to_node(dev_buf->vbb.vb2_buf.vb2_queue); + spin_lock(&node->buf_list_lock); + list_del(&dev_buf->list); + spin_unlock(&node->buf_list_lock); + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s: return buf, idx(%d), state(%d)\n", + pipe->desc->name, node->desc->name, + dev_buf->vbb.vb2_buf.index, vbf_state); + } + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s: finished job id(%d), vbf_state(%d), running jobs(%d)\n", + __func__, pipe->desc->name, pipe_job_info_id, vbf_state, + num_running_jobs); + + return 0; +} + +static __u32 get_pixel_byte_by_fmt(__u32 pix_fmt) +{ + switch (pix_fmt) { + case V4L2_PIX_FMT_MTISP_B8: + case V4L2_PIX_FMT_MTISP_F8: + return 8; + case V4L2_PIX_FMT_MTISP_B10: + case V4L2_PIX_FMT_MTISP_F10: + return 10; + case V4L2_PIX_FMT_MTISP_B12: + case V4L2_PIX_FMT_MTISP_F12: + return 12; + case V4L2_PIX_FMT_MTISP_B14: + case V4L2_PIX_FMT_MTISP_F14: + return 14; + case V4L2_PIX_FMT_MTISP_U8: + case V4L2_PIX_FMT_MTISP_U10: + case V4L2_PIX_FMT_MTISP_U12: + case V4L2_PIX_FMT_MTISP_U14: + return 16; + default: + return 0; + } +} + +static __u32 +mtk_dip_pass1_cal_main_stride(__u32 width, __u32 pix_fmt) +{ + __u32 stride; + __u32 pixel_byte = get_pixel_byte_by_fmt(pix_fmt); + + width = ALIGN(width, 4); + stride = ALIGN(DIV_ROUND_UP(width * pixel_byte, 8), 2); + + return ALIGN(stride, 4); +} + +static __u32 +mtk_dip_pass1_cal_pack_stride(__u32 width, __u32 pix_fmt) +{ + __u32 stride; + __u32 pixel_byte = get_pixel_byte_by_fmt(pix_fmt); + + width = ALIGN(width, 4); + stride = DIV_ROUND_UP(width * 3, 2); + stride = DIV_ROUND_UP(stride * pixel_byte, 8); + + if (pix_fmt == V4L2_PIX_FMT_MTISP_F10) + stride = ALIGN(stride, 4); + else + stride = ALIGN(stride, 8); + + return stride; +} + +static int is_stride_need_to_align(u32 format, u32 *need_aligned_fmts, + int length) +{ + int i; + + for (i = 0; i < length; i++) { + if (format == need_aligned_fmts[i]) + return true; + } + + return false; +} + +/* Stride that is accepted by MDP HW */ +static u32 dip_mdp_fmt_get_stride(struct v4l2_pix_format_mplane *mfmt, + const struct mtk_dip_dev_format *fmt, + unsigned int plane) +{ + enum mdp_color c = fmt->mdp_color; + u32 bytesperline = (mfmt->width * fmt->row_depth[plane]) / 8; + u32 stride = (bytesperline * MDP_COLOR_BITS_PER_PIXEL(c)) + / fmt->row_depth[0]; + + if (plane == 0) + return stride; + + if (plane < MDP_COLOR_GET_PLANE_COUNT(c)) { + if (MDP_COLOR_IS_BLOCK_MODE(c)) + stride = stride / 2; + return stride; + } + + return 0; +} + +/* Stride that is accepted by MDP HW of format with contiguous planes */ +static u32 +dip_mdp_fmt_get_stride_contig(const struct mtk_dip_dev_format *fmt, + u32 pix_stride, + unsigned int plane) +{ + enum mdp_color c = fmt->mdp_color; + u32 stride = pix_stride; + + if (plane == 0) + return stride; + + if (plane < MDP_COLOR_GET_PLANE_COUNT(c)) { + stride = stride >> MDP_COLOR_GET_H_SUBSAMPLE(c); + if (MDP_COLOR_IS_UV_COPLANE(c) && !MDP_COLOR_IS_BLOCK_MODE(c)) + stride = stride * 2; + return stride; + } + + return 0; +} + +/* Plane size that is accepted by MDP HW */ +static u32 +dip_mdp_fmt_get_plane_size(const struct mtk_dip_dev_format *fmt, + u32 stride, u32 height, + unsigned int plane) +{ + enum mdp_color c = fmt->mdp_color; + u32 bytesperline; + + bytesperline = (stride * fmt->row_depth[0]) + / MDP_COLOR_BITS_PER_PIXEL(c); + if (plane == 0) + return bytesperline * height; + if (plane < MDP_COLOR_GET_PLANE_COUNT(c)) { + height = height >> MDP_COLOR_GET_V_SUBSAMPLE(c); + if (MDP_COLOR_IS_BLOCK_MODE(c)) + bytesperline = bytesperline * 2; + return bytesperline * height; + } + + return 0; +} + +static int mtk_dip_pipe_get_stride(struct mtk_dip_pipe *pipe, + struct v4l2_pix_format_mplane *mfmt, + const struct mtk_dip_dev_format *dfmt, + int plane, + char *buf_name) +{ + int bpl; + u32 fmts_pass1_main[] = { + V4L2_PIX_FMT_MTISP_B8, + V4L2_PIX_FMT_MTISP_B10 + }; + u32 fmts_pass1_pack[] = { + V4L2_PIX_FMT_MTISP_F8, + V4L2_PIX_FMT_MTISP_F10 + }; + + if (is_stride_need_to_align(mfmt->pixelformat, fmts_pass1_main, + ARRAY_SIZE(fmts_pass1_main))) + bpl = mtk_dip_pass1_cal_main_stride(mfmt->width, + mfmt->pixelformat); + else if (is_stride_need_to_align(mfmt->pixelformat, fmts_pass1_pack, + ARRAY_SIZE(fmts_pass1_pack))) + bpl = mtk_dip_pass1_cal_pack_stride(mfmt->width, + mfmt->pixelformat); + else + bpl = dip_mdp_fmt_get_stride(mfmt, dfmt, plane); + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s:%s: plane(%d), pixelformat(%x) width(%d), stride(%d)", + __func__, pipe->desc->name, buf_name, plane, + mfmt->pixelformat, mfmt->width, bpl); + + return bpl; +} + +void mtk_dip_pipe_set_img_fmt(struct mtk_dip_pipe *pipe, + struct mtk_dip_video_device *node, + struct v4l2_pix_format_mplane *mfmt_to_fill, + const struct mtk_dip_dev_format *dev_fmt) +{ + int i; + + mfmt_to_fill->pixelformat = dev_fmt->format; + mfmt_to_fill->num_planes = dev_fmt->num_planes; + mfmt_to_fill->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + mfmt_to_fill->quantization = V4L2_QUANTIZATION_DEFAULT; + mfmt_to_fill->colorspace = dev_fmt->colorspace; + mfmt_to_fill->field = V4L2_FIELD_NONE; + + memset(mfmt_to_fill->reserved, 0, sizeof(mfmt_to_fill->reserved)); + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s:%s: Fmt(%c%c%c%c), w(%d),h(%d), f(%d)\n", + __func__, pipe->desc->name, node->desc->name, + mfmt_to_fill->pixelformat & 0xff, + mfmt_to_fill->pixelformat >> 8 & 0xff, + mfmt_to_fill->pixelformat >> 16 & 0xff, + mfmt_to_fill->pixelformat >> 24 & 0xff, + mfmt_to_fill->width, mfmt_to_fill->height, + mfmt_to_fill->field); + + for (i = 0; i < mfmt_to_fill->num_planes; ++i) { + u32 min_bpl = (mfmt_to_fill->width * dev_fmt->row_depth[i]) / 8; + u32 bpl = mfmt_to_fill->plane_fmt[i].bytesperline; + u32 sizeimage; + + if (bpl < min_bpl) + bpl = min_bpl; + + sizeimage = (bpl * mfmt_to_fill->height * dev_fmt->depth[i]) + / dev_fmt->row_depth[i]; + mfmt_to_fill->plane_fmt[i].bytesperline = bpl; + if (mfmt_to_fill->plane_fmt[i].sizeimage < sizeimage) + mfmt_to_fill->plane_fmt[i].sizeimage = sizeimage; + + memset(mfmt_to_fill->plane_fmt[i].reserved, + 0, sizeof(mfmt_to_fill->plane_fmt[i].reserved)); + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s:%s: plane(%d): bpl(%u), min_bpl(%u), s(%u)\n", + __func__, pipe->desc->name, node->desc->name, + i, bpl, min_bpl, mfmt_to_fill->plane_fmt[i].sizeimage); + } +} + +static void set_meta_fmt(struct mtk_dip_pipe *pipe, + struct v4l2_meta_format *metafmt_to_fill, + const struct mtk_dip_dev_format *dev_fmt) +{ + metafmt_to_fill->dataformat = dev_fmt->format; + + if (dev_fmt->buffer_size <= 0) { + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s: Invalid meta buf size(%u), use default(%u)\n", + pipe->desc->name, dev_fmt->buffer_size, + MTK_DIP_DEV_META_BUF_DEFAULT_SIZE); + + metafmt_to_fill->buffersize = + MTK_DIP_DEV_META_BUF_DEFAULT_SIZE; + } else { + metafmt_to_fill->buffersize = dev_fmt->buffer_size; + } +} + +void mtk_dip_pipe_load_default_fmt(struct mtk_dip_pipe *pipe, + struct mtk_dip_video_device *node, + struct v4l2_format *fmt_to_fill) +{ + int idx = node->desc->default_fmt_idx; + + if (node->desc->num_fmts == 0) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s:%s: desc->num_fmts is 0, no format support list\n", + __func__, node->desc->name); + + return; + } + + if (idx >= node->desc->num_fmts) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s:%s: invalid idx(%d), must < num_fmts(%d)\n", + __func__, node->desc->name, idx, node->desc->num_fmts); + + idx = 0; + } + + fmt_to_fill->type = node->desc->buf_type; + if (mtk_dip_buf_is_meta(node->desc->buf_type)) { + set_meta_fmt(pipe, &fmt_to_fill->fmt.meta, + &node->desc->fmts[idx]); + } else { + fmt_to_fill->fmt.pix_mp.width = node->desc->default_width; + fmt_to_fill->fmt.pix_mp.height = node->desc->default_height; + mtk_dip_pipe_set_img_fmt(pipe, node, &fmt_to_fill->fmt.pix_mp, + &node->desc->fmts[idx]); + } +} + +const struct mtk_dip_dev_format* +mtk_dip_pipe_find_fmt(struct mtk_dip_pipe *pipe, + struct mtk_dip_video_device *node, + u32 format) +{ + int i; + + for (i = 0; i < node->desc->num_fmts; i++) { + if (node->desc->fmts[i].format == format) + return &node->desc->fmts[i]; + } + + return NULL; +} + +static enum mdp_ycbcr_profile +map_ycbcr_prof_mplane(struct v4l2_pix_format_mplane *pix_mp, u32 mdp_color) +{ + if (MDP_COLOR_IS_RGB(mdp_color)) + return MDP_YCBCR_PROFILE_FULL_BT601; + + switch (pix_mp->colorspace) { + case V4L2_COLORSPACE_JPEG: + return MDP_YCBCR_PROFILE_JPEG; + case V4L2_COLORSPACE_REC709: + case V4L2_COLORSPACE_DCI_P3: + if (pix_mp->quantization == V4L2_QUANTIZATION_FULL_RANGE) + return MDP_YCBCR_PROFILE_FULL_BT709; + return MDP_YCBCR_PROFILE_BT709; + case V4L2_COLORSPACE_BT2020: + if (pix_mp->quantization == V4L2_QUANTIZATION_FULL_RANGE) + return MDP_YCBCR_PROFILE_FULL_BT2020; + return MDP_YCBCR_PROFILE_BT2020; + } + /* V4L2_COLORSPACE_SRGB or else */ + if (pix_mp->quantization == V4L2_QUANTIZATION_FULL_RANGE) + return MDP_YCBCR_PROFILE_FULL_BT601; + + return MDP_YCBCR_PROFILE_BT601; +} + +static inline int is_contig_mp_buffer(struct mtk_dip_dev_buffer *dev_buf) +{ + return !(MDP_COLOR_GET_PLANE_COUNT(dev_buf->dev_fmt->mdp_color) == 1); +} + +static int fill_ipi_img_param_mp(struct mtk_dip_pipe *pipe, + struct img_image_buffer *b, + struct mtk_dip_dev_buffer *dev_buf, + char *buf_name) +{ + struct v4l2_pix_format_mplane *pix_mp; + const struct mtk_dip_dev_format *mdp_fmt; + unsigned int i; + unsigned int total_plane_size = 0; + + if (!dev_buf->dev_fmt) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s: %s's dev format not set\n", + __func__, buf_name); + return -EINVAL; + } + + pix_mp = &dev_buf->fmt.fmt.pix_mp; + mdp_fmt = dev_buf->dev_fmt; + + b->usage = dev_buf->dma_port; + b->format.colorformat = dev_buf->dev_fmt->mdp_color; + b->format.width = dev_buf->fmt.fmt.pix_mp.width; + b->format.height = dev_buf->fmt.fmt.pix_mp.height; + b->format.ycbcr_prof = + map_ycbcr_prof_mplane(pix_mp, + dev_buf->dev_fmt->mdp_color); + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s: buf(%s), IPI: w(%d),h(%d),c(0x%x)\n", + pipe->desc->name, + buf_name, + b->format.width, + b->format.height, + b->format.colorformat); + + for (i = 0; i < pix_mp->num_planes; ++i) { + u32 stride = mtk_dip_pipe_get_stride(pipe, pix_mp, mdp_fmt, + i, buf_name); + + b->format.plane_fmt[i].stride = stride; + b->format.plane_fmt[i].size = + dip_mdp_fmt_get_plane_size(mdp_fmt, stride, + pix_mp->height, i); + b->iova[i] = dev_buf->isp_daddr[i]; + dev_dbg(&pipe->dip_dev->pdev->dev, + "Non-contiguous-mp-buf:plane(%i),stride(%d),size(%d),iova(%lx)", + i, + b->format.plane_fmt[i].stride, + b->format.plane_fmt[i].size, + b->iova[i]); + total_plane_size += b->format.plane_fmt[i].size; + } + + if (!is_contig_mp_buffer(dev_buf)) { + dev_dbg(&pipe->dip_dev->pdev->dev, + "Non-contiguous-mp-buf(%s),total-plane-size(%d),dma_port(%d)\n", + buf_name, + total_plane_size, + b->usage); + return 0; + } + + for (; i < MDP_COLOR_GET_PLANE_COUNT(b->format.colorformat); ++i) { + u32 stride = dip_mdp_fmt_get_stride_contig + (mdp_fmt, b->format.plane_fmt[0].stride, i); + + b->format.plane_fmt[i].stride = stride; + b->format.plane_fmt[i].size = + dip_mdp_fmt_get_plane_size(mdp_fmt, stride, + pix_mp->height, i); + b->iova[i] = b->iova[i - 1] + b->format.plane_fmt[i - 1].size; + dev_dbg(&pipe->dip_dev->pdev->dev, + "Contiguous-mp-buf:plane(%i),stride(%d),size(%d),iova(%lx)", + i, + b->format.plane_fmt[i].stride, + b->format.plane_fmt[i].size, + b->iova[i]); + total_plane_size += b->format.plane_fmt[i].size; + } + + dev_dbg(&pipe->dip_dev->pdev->dev, + "Contiguous-mp-buf(%s),v4l2-sizeimage(%d),total-plane-size(%d)\n", + buf_name, + pix_mp->plane_fmt[0].sizeimage, + total_plane_size); + + return 0; +} + +static int fill_input_ipi_param(struct mtk_dip_pipe *pipe, + struct img_input *iin, + struct mtk_dip_dev_buffer *dev_buf, + char *buf_name) +{ + struct img_image_buffer *img = &iin->buffer; + + return fill_ipi_img_param_mp(pipe, img, dev_buf, + buf_name); +} + +static int fill_output_ipi_param(struct mtk_dip_pipe *pipe, + struct img_output *iout, + struct mtk_dip_dev_buffer *dev_buf_out, + struct mtk_dip_dev_buffer *dev_buf_in, + char *buf_name) +{ + int ret; + struct img_image_buffer *img = &iout->buffer; + + ret = fill_ipi_img_param_mp(pipe, img, dev_buf_out, + buf_name); + iout->crop.left = 0; + iout->crop.top = 0; + iout->crop.width = dev_buf_in->fmt.fmt.pix_mp.width; + iout->crop.height = dev_buf_in->fmt.fmt.pix_mp.height; + iout->crop.left_subpix = 0; + iout->crop.top_subpix = 0; + iout->crop.width_subpix = 0; + iout->crop.height_subpix = 0; + iout->rotation = dev_buf_out->rotation; + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s: buf(%s) IPI-ext:c_l(%d),c_t(%d),c_w(%d),c_h(%d)\n", + pipe->desc->name, + buf_name, + iout->crop.left, + iout->crop.top, + iout->crop.width, + iout->crop.height); + + dev_dbg(&pipe->dip_dev->pdev->dev, + "c_ls(%d),c_ts(%d),c_ws(%d),c_hs(%d),rot(%d)\n", + iout->crop.left_subpix, + iout->crop.top_subpix, + iout->crop.width_subpix, + iout->crop.height_subpix, + iout->rotation); + + return ret; +} + +void mtk_dip_pipe_ipi_params_config(struct mtk_dip_request *req) +{ + struct mtk_dip_pipe *pipe = req->dip_pipe; + struct platform_device *pdev = pipe->dip_dev->pdev; + struct mtk_dip_pipe_job_info *pipe_job_info = &req->job_info; + int out_img_buf_idx; + int in_img_buf_idx; + struct img_ipi_frameparam *dip_param = &req->img_fparam.frameparam; + struct mtk_dip_dev_buffer *dev_buf_in; + struct mtk_dip_dev_buffer *dev_buf_out; + struct mtk_dip_dev_buffer *dev_buf_tuning; + int i = 0; + int mdp_ids[2] = {MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE, + MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE}; + char *mdp_names[2] = {"mdp0", "mdp1"}; + + dev_dbg(&pdev->dev, + "%s:%s: pipe-job id(%d)\n", + __func__, pipe->desc->name, + pipe_job_info->id); + + /* Fill ipi params for DIP driver */ + memset(dip_param, 0, sizeof(*dip_param)); + dip_param->index = pipe_job_info->id; + dip_param->type = STREAM_ISP_IC; + + /* Tuning buffer */ + dev_buf_tuning = + pipe_job_info->buf_map[MTK_DIP_VIDEO_NODE_ID_TUNING_OUT]; + if (dev_buf_tuning) { + dev_dbg(&pdev->dev, + "Tuning buf queued: scp_daddr(%pad),isp_daddr(%pad)\n", + &dev_buf_tuning->scp_daddr[0], + &dev_buf_tuning->isp_daddr[0]); + dip_param->tuning_data.pa = + (uint32_t)dev_buf_tuning->scp_daddr[0]; + dip_param->tuning_data.present = true; + dip_param->tuning_data.iova = + (uint32_t)dev_buf_tuning->isp_daddr[0]; + } else { + dev_dbg(&pdev->dev, + "No enqueued tuning buffer: scp_daddr(%llx),present(%llx),isp_daddr(%llx\n", + dip_param->tuning_data.pa, + dip_param->tuning_data.present, + dip_param->tuning_data.iova); + } + + in_img_buf_idx = 0; + + /* Raw-in buffer */ + dev_buf_in = + pipe_job_info->buf_map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT]; + if (dev_buf_in) { + struct img_input *iin = &dip_param->inputs[in_img_buf_idx]; + + fill_input_ipi_param(pipe, iin, dev_buf_in, "RAW"); + in_img_buf_idx++; + } + + /* Array of MDP buffers */ + out_img_buf_idx = 0; + + for (i = 0; i < ARRAY_SIZE(mdp_ids); i++) { + dev_buf_out = + pipe_job_info->buf_map[mdp_ids[i]]; + if (dev_buf_out) { + struct img_output *iout = + &dip_param->outputs[out_img_buf_idx]; + + fill_output_ipi_param(pipe, iout, dev_buf_out, + dev_buf_in, mdp_names[i]); + out_img_buf_idx++; + } + } + + dip_param->num_outputs = out_img_buf_idx; + dip_param->num_inputs = in_img_buf_idx; +} + +void mtk_dip_pipe_try_enqueue(struct mtk_dip_pipe *pipe) +{ + struct mtk_dip_pipe_job_info *job_info; + struct mtk_dip_pipe_job_info *tmp_job_info; + struct list_head enqueue_job_list; + + INIT_LIST_HEAD(&enqueue_job_list); + if (!pipe->streaming) + return; + + spin_lock(&pipe->job_lock); + list_for_each_entry_safe(job_info, tmp_job_info, + &pipe->pipe_job_pending_list, + list) { + list_del(&job_info->list); + pipe->num_pending_jobs--; + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s: current num of pending jobs(%d)\n", + __func__, pipe->desc->name, + pipe->num_pending_jobs); + list_add_tail(&job_info->list, + &enqueue_job_list); + } + spin_unlock(&pipe->job_lock); + + list_for_each_entry_safe(job_info, tmp_job_info, + &enqueue_job_list, + list) { + struct mtk_dip_request *req = + mtk_dip_pipe_job_info_to_req(job_info); + + list_del(&job_info->list); + + spin_lock(&pipe->job_lock); + list_add_tail(&job_info->list, + &pipe->pipe_job_running_list); + pipe->num_jobs++; + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s: current num of running jobs(%d)\n", + __func__, pipe->desc->name, + pipe->num_jobs); + spin_unlock(&pipe->job_lock); + + mtk_dip_hw_enqueue(&pipe->dip_dev->dip_hw, req); + } +} diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h new file mode 100644 index 000000000000..e3372c291f9a --- /dev/null +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h @@ -0,0 +1,337 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018 MediaTek Inc. + * + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> + * + */ + +#ifndef _MTK_DIP_DEV_H_ +#define _MTK_DIP_DEV_H_ + +#include <linux/types.h> +#include <linux/platform_device.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> +#include <media/v4l2-device.h> +#include <linux/videodev2.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-v4l2.h> + +#include "mtk_dip-hw.h" + +#define MTK_DIP_PIPE_ID_PREVIEW 0 +#define MTK_DIP_PIPE_ID_CAPTURE 1 +#define MTK_DIP_PIPE_ID_REPROCESS 2 +#define MTK_DIP_PIPE_ID_TOTAL_NUM 3 + +#define MTK_DIP_VIDEO_NODE_ID_RAW_OUT 0 +#define MTK_DIP_VIDEO_NODE_ID_TUNING_OUT 1 +#define MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM 2 +#define MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE 2 +#define MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE 3 +#define MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM 2 +#define MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM \ + (MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM + \ + MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM) + +#define MTK_DIP_VIDEO_NODE_ID_NO_MASTER -1 + +#define MTK_DIP_OUTPUT_MIN_WIDTH 2U +#define MTK_DIP_OUTPUT_MIN_HEIGHT 2U +#define MTK_DIP_OUTPUT_MAX_WIDTH 5376U +#define MTK_DIP_OUTPUT_MAX_HEIGHT 4032U +#define MTK_DIP_CAPTURE_MIN_WIDTH 2U +#define MTK_DIP_CAPTURE_MIN_HEIGHT 2U +#define MTK_DIP_CAPTURE_MAX_WIDTH 5376U +#define MTK_DIP_CAPTURE_MAX_HEIGHT 4032U + +#define MTK_DIP_DEV_DIP_MEDIA_MODEL_NAME "MTK-ISP-DIP-V4L2" +#define MTK_DIP_DEV_DIP_PREVIEW_NAME \ + MTK_DIP_DEV_DIP_MEDIA_MODEL_NAME +#define MTK_DIP_DEV_DIP_CAPTURE_NAME "MTK-ISP-DIP-CAP-V4L2" +#define MTK_DIP_DEV_DIP_REPROCESS_NAME "MTK-ISP-DIP-REP-V4L2" + +#define MTK_DIP_DEV_META_BUF_DEFAULT_SIZE (1024 * 128) +#define MTK_DIP_DEV_META_BUF_POOL_MAX_SIZE (1024 * 1024 * 6) + +#define V4L2_CID_MTK_DIP_MAX 100 + +enum mtk_dip_pixel_mode { + mtk_dip_pixel_mode_default = 0, + mtk_dip_pixel_mode_1, + mtk_dip_pixel_mode_2, + mtk_dip_pixel_mode_4, + mtk_dip_pixel_mode_num, +}; + +struct mtk_dip_dev_format { + u32 format; + u32 mdp_color; + u32 colorspace; + u8 depth[VIDEO_MAX_PLANES]; + u8 row_depth[VIDEO_MAX_PLANES]; + u8 num_planes; + u8 walign; + u8 halign; + u8 salign; + u32 flags; + u32 buffer_size; +}; + +struct mtk_dip_pipe_job_info { + int id; + struct mtk_dip_dev_buffer* + buf_map[MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM]; + struct list_head list; +}; + +struct mtk_dip_dev_buffer { + struct vb2_v4l2_buffer vbb; + struct v4l2_format fmt; + const struct mtk_dip_dev_format *dev_fmt; + int pipe_job_id; + dma_addr_t isp_daddr[VB2_MAX_PLANES]; + dma_addr_t scp_daddr[VB2_MAX_PLANES]; + unsigned int dma_port; + int rotation; + struct list_head list; +}; + +struct mtk_dip_pipe_desc { + char *name; + int master; + int id; + const struct mtk_dip_video_device_desc *output_queue_descs; + int total_output_queues; + const struct mtk_dip_video_device_desc *capture_queue_descs; + int total_capture_queues; +}; + +struct mtk_dip_video_device_desc { + int id; + char *name; + u32 buf_type; + u32 cap; + int smem_alloc; + const struct mtk_dip_dev_format *fmts; + int num_fmts; + char *description; + int default_width; + int default_height; + unsigned int dma_port; + const struct v4l2_frmsizeenum *frmsizeenum; + const struct v4l2_ioctl_ops *ops; + u32 flags; + int default_fmt_idx; +}; + +struct mtk_dip_dev_queue { + struct vb2_queue vbq; + /* Serializes vb2 queue and video device operations */ + struct mutex lock; + const struct mtk_dip_dev_format *dev_fmt; + int rotation; +}; + +struct mtk_dip_video_device { + struct video_device vdev; + struct mtk_dip_dev_queue dev_q; + struct v4l2_format vdev_fmt; + struct media_pad vdev_pad; + struct v4l2_mbus_framefmt pad_fmt; + struct v4l2_ctrl_handler ctrl_handler; + u32 flags; + const struct mtk_dip_video_device_desc *desc; + atomic_t sequence; + struct list_head buf_list; + /* protect the in-device buffer list */ + spinlock_t buf_list_lock; +}; + +struct mtk_dip_pipe { + struct mtk_dip_dev *dip_dev; + struct mtk_dip_video_device nodes[MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM]; + int num_nodes; + atomic_t cnt_nodes_not_streaming; + int streaming; + struct media_pad *subdev_pads; + struct media_pipeline pipeline; + struct v4l2_subdev subdev; + struct v4l2_subdev_fh *fh; + atomic_t pipe_job_sequence; + struct list_head pipe_job_pending_list; + int num_pending_jobs; + struct list_head pipe_job_running_list; + int num_jobs; + /* Serializes pipe's stream on/off and buffers enqueue operations */ + struct mutex lock; + spinlock_t job_lock; /* protect the pipe job list */ + const struct mtk_dip_pipe_desc *desc; +}; + +struct mtk_dip_dev { + struct platform_device *pdev; + struct media_device mdev; + struct v4l2_device v4l2_dev; + struct mtk_dip_pipe dip_pipe[MTK_DIP_PIPE_ID_TOTAL_NUM]; + struct mtk_dip_hw dip_hw; +}; + +struct mtk_dip_request { + struct media_request req; + struct mtk_dip_pipe *dip_pipe; + struct mtk_dip_pipe_job_info job_info; + struct img_frameparam img_fparam; + struct work_struct fw_work; + struct work_struct mdp_work; + /* It is used only in timeout handling flow */ + struct work_struct mdpcb_work; + struct mtk_dip_hw_subframe *working_buf; + atomic_t buf_count; +}; + +int mtk_dip_dev_media_register(struct device *dev, + struct media_device *media_dev, + const char *model); + +void mtk_dip_dev_v4l2_release(struct mtk_dip_dev *dip_dev); + +int mtk_dip_dev_v4l2_register(struct device *dev, + struct media_device *media_dev, + struct v4l2_device *v4l2_dev); + +int mtk_dip_pipe_v4l2_register(struct mtk_dip_pipe *pipe, + struct media_device *media_dev, + struct v4l2_device *v4l2_dev); + +void mtk_dip_pipe_v4l2_unregister(struct mtk_dip_pipe *pipe); + +int mtk_dip_pipe_queue_buffers(struct media_request *req, int initial); + +int mtk_dip_pipe_init(struct mtk_dip_pipe *pipe, + struct mtk_dip_dev *dip_dev, + const struct mtk_dip_pipe_desc *setting, + struct media_device *media_dev, + struct v4l2_device *v4l2_dev); + +void mtk_dip_pipe_ipi_params_config(struct mtk_dip_request *req); + +int mtk_dip_pipe_release(struct mtk_dip_pipe *pipe); + +struct mtk_dip_pipe_job_info * +mtk_dip_pipe_get_running_job_info(struct mtk_dip_pipe *pipe, + int pipe_job_id); + +int mtk_dip_pipe_next_job_id(struct mtk_dip_pipe *pipe); + +void mtk_dip_pipe_debug_job(struct mtk_dip_pipe *pipe, + struct mtk_dip_pipe_job_info *pipe_job_info); + +int mtk_dip_pipe_job_finish(struct mtk_dip_pipe *pipe, + unsigned int pipe_job_info_id, + enum vb2_buffer_state state); + +const struct mtk_dip_dev_format * +mtk_dip_pipe_find_fmt(struct mtk_dip_pipe *pipe, + struct mtk_dip_video_device *node, + u32 format); + +void mtk_dip_pipe_set_img_fmt(struct mtk_dip_pipe *pipe, + struct mtk_dip_video_device *node, + struct v4l2_pix_format_mplane *mfmt_to_fill, + const struct mtk_dip_dev_format *dev_fmt); + +void mtk_dip_pipe_load_default_fmt(struct mtk_dip_pipe *pipe, + struct mtk_dip_video_device *node, + struct v4l2_format *fmt_to_fill); + +void mtk_dip_pipe_try_enqueue(struct mtk_dip_pipe *pipe); + +void mtk_dip_hw_enqueue(struct mtk_dip_hw *dip_hw, struct mtk_dip_request *req); + +int mtk_dip_hw_streamoff(struct mtk_dip_pipe *pipe); + +int mtk_dip_hw_streamon(struct mtk_dip_pipe *pipe); + +static inline struct mtk_dip_pipe* +mtk_dip_dev_get_pipe(struct mtk_dip_dev *dip_dev, unsigned int pipe_id) +{ + if (pipe_id < 0 && pipe_id >= MTK_DIP_PIPE_ID_TOTAL_NUM) + return NULL; + + return &dip_dev->dip_pipe[pipe_id]; +} + +static inline struct mtk_dip_video_device* +mtk_dip_file_to_node(struct file *file) +{ + return container_of(video_devdata(file), + struct mtk_dip_video_device, vdev); +} + +static inline struct mtk_dip_pipe* +mtk_dip_subdev_to_pipe(struct v4l2_subdev *sd) +{ + return container_of(sd, struct mtk_dip_pipe, subdev); +} + +static inline struct mtk_dip_dev* +mtk_dip_mdev_to_dev(struct media_device *mdev) +{ + return container_of(mdev, struct mtk_dip_dev, mdev); +} + +static inline struct mtk_dip_video_device* +mtk_dip_vbq_to_node(struct vb2_queue *vq) +{ + return container_of(vq, struct mtk_dip_video_device, dev_q.vbq); +} + +static inline struct mtk_dip_dev_buffer* +mtk_dip_vb2_buf_to_dev_buf(struct vb2_buffer *vb) +{ + return container_of(vb, struct mtk_dip_dev_buffer, vbb.vb2_buf); +} + +static inline struct mtk_dip_dev *mtk_dip_hw_to_dev(struct mtk_dip_hw *dip_hw) +{ + return container_of(dip_hw, struct mtk_dip_dev, dip_hw); +} + +static inline struct mtk_dip_request* +mtk_dip_pipe_job_info_to_req(struct mtk_dip_pipe_job_info *job_info) +{ + return container_of(job_info, struct mtk_dip_request, job_info); +} + +static inline struct mtk_dip_request* +mtk_dip_hw_fw_work_to_req(struct work_struct *fw_work) +{ + return container_of(fw_work, struct mtk_dip_request, fw_work); +} + +static inline struct mtk_dip_request* +mtk_dip_hw_mdp_work_to_req(struct work_struct *mdp_work) +{ + return container_of(mdp_work, struct mtk_dip_request, mdp_work); +} + +static inline struct mtk_dip_request * +mtk_dip_hw_mdpcb_work_to_req(struct work_struct *mdpcb_work) +{ + return container_of(mdpcb_work, struct mtk_dip_request, mdpcb_work); +} + +static inline int mtk_dip_buf_is_meta(u32 type) +{ + return type == V4L2_BUF_TYPE_META_CAPTURE || + type == V4L2_BUF_TYPE_META_OUTPUT; +} + +static inline int mtk_dip_pipe_get_pipe_from_job_id(int pipe_job_id) +{ + return (pipe_job_id >> 16) & 0x0000FFFF; +} + +#endif /* _MTK_DIP_DEV_H_ */ diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h new file mode 100644 index 000000000000..2dd4dae4336c --- /dev/null +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h @@ -0,0 +1,155 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018 MediaTek Inc. + * + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> + * Holmes Chiou <holmes.chiou-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> + * + */ + +#ifndef _MTK_DIP_HW_H_ +#define _MTK_DIP_HW_H_ + +#include <linux/clk.h> +#include "mtk-img-ipi.h" + +#define DIP_COMPOSER_THREAD_TIMEOUT 16U +#define DIP_COMPOSING_MAX_NUM 3 +#define DIP_MAX_ERR_COUNT 188U +#define DIP_FLUSHING_WQ_TIMEOUT (16U * DIP_MAX_ERR_COUNT) + +#define DIP_FRM_SZ (76 * 1024) +#define DIP_SUB_FRM_SZ (16 * 1024) +#define DIP_TUNING_SZ (32 * 1024) +#define DIP_COMP_SZ (24 * 1024) +#define DIP_FRAMEPARAM_SZ (4 * 1024) + +#define DIP_TUNING_OFFSET DIP_SUB_FRM_SZ +#define DIP_COMP_OFFSET (DIP_TUNING_OFFSET + DIP_TUNING_SZ) +#define DIP_FRAMEPARAM_OFFSET (DIP_COMP_OFFSET + DIP_COMP_SZ) +#define DIP_SUB_FRM_DATA_NUM 32 +#define DIP_SCP_WORKINGBUF_OFFSET (5 * 1024 * 1024) +#define DIP_V4l2_META_BUF_OFFSET (DIP_SCP_WORKINGBUF_OFFSET + \ + DIP_SUB_FRM_DATA_NUM * DIP_FRM_SZ) + +#define MTK_DIP_CLK_NUM 2 + +enum STREAM_TYPE_ENUM { + STREAM_UNKNOWN, + STREAM_BITBLT, + STREAM_GPU_BITBLT, + STREAM_DUAL_BITBLT, + STREAM_2ND_BITBLT, + STREAM_ISP_IC, + STREAM_ISP_VR, + STREAM_ISP_ZSD, + STREAM_ISP_IP, + STREAM_ISP_VSS, + STREAM_ISP_ZSD_SLOW, + STREAM_WPE, + STREAM_WPE2, +}; + +enum mtk_dip_hw_user_state { + DIP_STATE_INIT = 0, + DIP_STATE_OPENED, + DIP_STATE_STREAMON, + DIP_STATE_STREAMOFF +}; + +struct mtk_dip_hw_working_buf { + dma_addr_t scp_daddr; + void *vaddr; + dma_addr_t isp_daddr; +}; + +struct mtk_dip_hw_subframe { + struct mtk_dip_hw_working_buf buffer; + int size; + struct mtk_dip_hw_working_buf config_data; + struct mtk_dip_hw_working_buf tuning_buf; + struct mtk_dip_hw_working_buf frameparam; + struct list_head list_entry; +}; + +enum frame_state { + FRAME_STATE_INIT = 0, + FRAME_STATE_COMPOSING, + FRAME_STATE_RUNNING, + FRAME_STATE_DONE, + FRAME_STATE_STREAMOFF, + FRAME_STATE_ERROR, + FRAME_STATE_HW_TIMEOUT +}; + +struct mtk_dip_hw_working_buf_list { + struct list_head list; + u32 cnt; + spinlock_t lock; /* protect the list and cnt */ + +}; + +struct mtk_dip_hw { + struct clk_bulk_data clks[MTK_DIP_CLK_NUM]; + struct workqueue_struct *composer_wq; + struct workqueue_struct *mdp_wq; + wait_queue_head_t working_buf_wq; + wait_queue_head_t flushing_wq; + wait_queue_head_t flushing_hw_wq; + atomic_t num_composing; /* increase after ipi */ + /* increase after calling MDP driver */ + atomic_t num_running; + /*MDP/GCE callback workqueue */ + struct workqueue_struct *mdpcb_workqueue; + /* for MDP driver */ + struct platform_device *mdp_pdev; + /* for SCP driver */ + struct platform_device *scp_pdev; + struct rproc *rproc_handle; + struct mtk_dip_hw_working_buf_list dip_freebufferlist; + struct mtk_dip_hw_working_buf_list dip_usedbufferlist; + dma_addr_t working_buf_mem_scp_daddr; + void *working_buf_mem_vaddr; + dma_addr_t working_buf_mem_isp_daddr; + int working_buf_mem_size; + struct mtk_dip_hw_subframe working_buf[DIP_SUB_FRM_DATA_NUM]; + /* increase after enqueue */ + atomic_t dip_enque_cnt; + /* increase after stream on, decrease when stream off */ + atomic_t dip_stream_cnt; + /* To serialize request opertion to DIP co-procrosser and hadrware */ + struct mutex hw_op_lock; + /* To restrict the max number of request be send to SCP */ + struct semaphore sem; +}; + +static inline void +mtk_dip_wbuf_to_ipi_img_sw_addr(struct img_sw_addr *ipi_addr, + struct mtk_dip_hw_working_buf *wbuf) +{ + ipi_addr->va = (u64)wbuf->vaddr; + ipi_addr->pa = (u32)wbuf->scp_daddr; +} + +static inline void +mtk_dip_wbuf_to_ipi_img_addr(struct img_addr *ipi_addr, + struct mtk_dip_hw_working_buf *wbuf) +{ + ipi_addr->va = (u64)wbuf->vaddr; + ipi_addr->pa = (u32)wbuf->scp_daddr; + ipi_addr->iova = (u32)wbuf->isp_daddr; +} + +static inline void +mtk_dip_wbuf_to_ipi_tuning_addr(struct tuning_addr *ipi_addr, + struct mtk_dip_hw_working_buf *wbuf) +{ + ipi_addr->pa = (u32)wbuf->scp_daddr; + ipi_addr->iova = (u32)wbuf->isp_daddr; +} + +int mtk_dip_hw_working_buf_pool_init(struct mtk_dip_hw *dip_hw); +void mtk_dip_hw_working_buf_pool_release(struct mtk_dip_hw *dip_hw); + +#endif /* _MTK_DIP_HW_H_ */ + diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c new file mode 100644 index 000000000000..603be116b03f --- /dev/null +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c @@ -0,0 +1,794 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 MediaTek Inc. + * + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> + * Holmes Chiou <holmes.chiou-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> + * + */ + +#include <linux/device.h> +#include <linux/dma-iommu.h> +#include <linux/freezer.h> +#include <linux/platform_data/mtk_scp.h> +#include <linux/pm_runtime.h> +#include <linux/remoteproc.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/wait.h> +#include "mtk-mdp3-cmdq.h" +#include "mtk_dip-dev.h" +#include "mtk_dip-hw.h" + +int mtk_dip_hw_working_buf_pool_init(struct mtk_dip_hw *dip_hw) +{ + int i; + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); + const int working_buf_size = round_up(DIP_FRM_SZ, PAGE_SIZE); + phys_addr_t working_buf_paddr; + + INIT_LIST_HEAD(&dip_hw->dip_freebufferlist.list); + spin_lock_init(&dip_hw->dip_freebufferlist.lock); + dip_hw->dip_freebufferlist.cnt = 0; + + INIT_LIST_HEAD(&dip_hw->dip_usedbufferlist.list); + spin_lock_init(&dip_hw->dip_usedbufferlist.lock); + dip_hw->dip_usedbufferlist.cnt = 0; + + init_waitqueue_head(&dip_hw->working_buf_wq); + + dip_hw->working_buf_mem_size = DIP_SUB_FRM_DATA_NUM * working_buf_size + + DIP_SCP_WORKINGBUF_OFFSET; + dip_hw->working_buf_mem_vaddr = + dma_alloc_coherent(&dip_hw->scp_pdev->dev, + dip_hw->working_buf_mem_size, + &dip_hw->working_buf_mem_scp_daddr, + GFP_KERNEL); + if (!dip_hw->working_buf_mem_vaddr) { + dev_err(&dip_dev->pdev->dev, + "memory alloc size %ld failed\n", + dip_hw->working_buf_mem_size); + return -ENOMEM; + } + + /* + * We got the incorrect physical address mapped when + * using dma_map_single() so I used dma_map_page_attrs() + * directly to workaround here. + * + * When I use dma_map_single() to map the address, the + * physical address retrieved back with iommu_get_domain_for_dev() + * and iommu_iova_to_phys() was not equal to the + * SCP dma address (it should be the same as the physical address + * since we don't have iommu), and was shifted by 0x4000000. + */ + working_buf_paddr = dip_hw->working_buf_mem_scp_daddr; + dip_hw->working_buf_mem_isp_daddr = + dma_map_page_attrs(&dip_dev->pdev->dev, + phys_to_page(working_buf_paddr), + 0, dip_hw->working_buf_mem_size, + DMA_BIDIRECTIONAL, + DMA_ATTR_SKIP_CPU_SYNC); + if (dma_mapping_error(&dip_dev->pdev->dev, + dip_hw->working_buf_mem_isp_daddr)) { + dev_err(&dip_dev->pdev->dev, + "failed to map buffer: s_daddr(%pad)\n", + &dip_hw->working_buf_mem_scp_daddr); + dma_free_coherent(&dip_hw->scp_pdev->dev, + dip_hw->working_buf_mem_size, + dip_hw->working_buf_mem_vaddr, + dip_hw->working_buf_mem_scp_daddr); + + return -ENOMEM; + } + + dev_dbg(&dip_dev->pdev->dev, + "%s: working_buf_mem: vaddr(%p), scp_daddr(%pad)\n", + __func__, + dip_hw->working_buf_mem_vaddr, + &dip_hw->working_buf_mem_scp_daddr); + + for (i = 0; i < DIP_SUB_FRM_DATA_NUM; i++) { + struct mtk_dip_hw_subframe *buf = &dip_hw->working_buf[i]; + + /* + * Total: 0 ~ 72 KB + * SubFrame: 0 ~ 16 KB + */ + buf->buffer.scp_daddr = dip_hw->working_buf_mem_scp_daddr + + DIP_SCP_WORKINGBUF_OFFSET + i * working_buf_size; + buf->buffer.vaddr = dip_hw->working_buf_mem_vaddr + + DIP_SCP_WORKINGBUF_OFFSET + i * working_buf_size; + buf->buffer.isp_daddr = dip_hw->working_buf_mem_isp_daddr + + DIP_SCP_WORKINGBUF_OFFSET + i * working_buf_size; + buf->size = working_buf_size; + + dev_dbg(&dip_dev->pdev->dev, + "%s: buf(%d), scp_daddr(%pad), isp_daddr(%pad)\n", + __func__, i, &buf->buffer.scp_daddr, + &buf->buffer.isp_daddr); + + /* Tuning: 16 ~ 48 KB */ + buf->tuning_buf.scp_daddr = + buf->buffer.scp_daddr + DIP_TUNING_OFFSET; + buf->tuning_buf.vaddr = + buf->buffer.vaddr + DIP_TUNING_OFFSET; + buf->tuning_buf.isp_daddr = + buf->buffer.isp_daddr + DIP_TUNING_OFFSET; + + dev_dbg(&dip_dev->pdev->dev, + "%s: tuning_buf(%d), scp_daddr(%pad), isp_daddr(%pad)\n", + __func__, i, &buf->tuning_buf.scp_daddr, + &buf->tuning_buf.isp_daddr); + + /* Config_data: 48 ~ 72 KB */ + buf->config_data.scp_daddr = + buf->buffer.scp_daddr + DIP_COMP_OFFSET; + buf->config_data.vaddr = buf->buffer.vaddr + DIP_COMP_OFFSET; + + dev_dbg(&dip_dev->pdev->dev, + "%s: config_data(%d), scp_daddr(%pad), vaddr(%p)\n", + __func__, i, &buf->config_data.scp_daddr, + buf->config_data.vaddr); + + /* Frame parameters: 72 ~ 76 KB */ + buf->frameparam.scp_daddr = + buf->buffer.scp_daddr + DIP_FRAMEPARAM_OFFSET; + buf->frameparam.vaddr = + buf->buffer.vaddr + DIP_FRAMEPARAM_OFFSET; + + dev_dbg(&dip_dev->pdev->dev, + "%s: frameparam(%d), scp_daddr(%pad), vaddr(%p)\n", + __func__, i, &buf->frameparam.scp_daddr, + buf->frameparam.vaddr); + + list_add_tail(&buf->list_entry, + &dip_hw->dip_freebufferlist.list); + dip_hw->dip_freebufferlist.cnt++; + } + + return 0; +} + +void mtk_dip_hw_working_buf_pool_release(struct mtk_dip_hw *dip_hw) +{ + /* All the buffer should be in the freebufferlist when release */ + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); + u32 i; + + if (dip_hw->dip_usedbufferlist.cnt) + dev_warn(&dip_dev->pdev->dev, + "%s: dip_usedbufferlist is not empty (%d/%d)\n", + __func__, dip_hw->dip_usedbufferlist.cnt, i); + + dma_unmap_page_attrs(&dip_dev->pdev->dev, + dip_hw->working_buf_mem_isp_daddr, + dip_hw->working_buf_mem_size, DMA_BIDIRECTIONAL, + DMA_ATTR_SKIP_CPU_SYNC); + + dma_free_coherent(&dip_hw->scp_pdev->dev, dip_hw->working_buf_mem_size, + dip_hw->working_buf_mem_vaddr, + dip_hw->working_buf_mem_scp_daddr); +} + +static void mtk_dip_hw_working_buf_free(struct mtk_dip_hw *dip_hw, + struct mtk_dip_hw_subframe *working_buf) +{ + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); + + if (!working_buf) + return; + + spin_lock(&dip_hw->dip_usedbufferlist.lock); + list_del(&working_buf->list_entry); + dip_hw->dip_usedbufferlist.cnt--; + dev_dbg(&dip_dev->pdev->dev, + "%s: Free used buffer(%pad)\n", + __func__, &working_buf->buffer.scp_daddr); + spin_unlock(&dip_hw->dip_usedbufferlist.lock); + + spin_lock(&dip_hw->dip_freebufferlist.lock); + list_add_tail(&working_buf->list_entry, + &dip_hw->dip_freebufferlist.list); + dip_hw->dip_freebufferlist.cnt++; + spin_unlock(&dip_hw->dip_freebufferlist.lock); +} + +static struct mtk_dip_hw_subframe* +mtk_dip_hw_working_buf_alloc(struct mtk_dip_hw *dip_hw) +{ + struct mtk_dip_hw_subframe *working_buf; + + spin_lock(&dip_hw->dip_freebufferlist.lock); + if (list_empty(&dip_hw->dip_freebufferlist.list)) { + spin_unlock(&dip_hw->dip_freebufferlist.lock); + return NULL; + } + + working_buf = list_first_entry(&dip_hw->dip_freebufferlist.list, + struct mtk_dip_hw_subframe, list_entry); + list_del(&working_buf->list_entry); + dip_hw->dip_freebufferlist.cnt--; + spin_unlock(&dip_hw->dip_freebufferlist.lock); + + spin_lock(&dip_hw->dip_usedbufferlist.lock); + list_add_tail(&working_buf->list_entry, + &dip_hw->dip_usedbufferlist.list); + dip_hw->dip_usedbufferlist.cnt++; + spin_unlock(&dip_hw->dip_usedbufferlist.lock); + + return working_buf; +} + +static void mtk_dip_notify(struct mtk_dip_request *req) +{ + struct mtk_dip_hw *dip_hw = &req->dip_pipe->dip_dev->dip_hw; + struct mtk_dip_dev *dip_dev = req->dip_pipe->dip_dev; + struct mtk_dip_pipe *pipe = req->dip_pipe; + struct img_ipi_frameparam *iparam = &req->img_fparam.frameparam; + enum vb2_buffer_state vbf_state; + int ret; + + if (iparam->state != FRAME_STATE_HW_TIMEOUT) + vbf_state = VB2_BUF_STATE_DONE; + else + vbf_state = VB2_BUF_STATE_ERROR; + + ret = mtk_dip_pipe_job_finish(pipe, iparam->index, vbf_state); + if (ret) + dev_dbg(&dip_dev->pdev->dev, "%s: finish CB failed(%d)\n", + __func__, ret); + + pm_runtime_put_autosuspend(&pipe->dip_dev->pdev->dev); + + mtk_dip_hw_working_buf_free(dip_hw, req->working_buf); + req->working_buf = NULL; + wake_up(&dip_hw->working_buf_wq); + wake_up(&dip_hw->flushing_wq); + + dev_dbg(&dip_dev->pdev->dev, + "%s:%s: job id(%d), frame_no(%d) finished\n", + __func__, pipe->desc->name, iparam->index, iparam->frame_no); +} + +static void mdp_cb_timeout_worker(struct work_struct *work) +{ + struct mtk_dip_request *req = mtk_dip_hw_mdpcb_work_to_req(work); + struct img_ipi_param ipi_param; + + dev_dbg(&req->dip_pipe->dip_dev->pdev->dev, + "%s: send frame no(%d) HW timeout dbg IPI\n", + __func__, req->img_fparam.frameparam.frame_no); + + ipi_param.usage = IMG_IPI_DEBUG; + scp_ipi_send(req->dip_pipe->dip_dev->dip_hw.scp_pdev, SCP_IPI_DIP, + (void *)&ipi_param, sizeof(ipi_param), 0); + mtk_dip_notify(req); +} + +/* Maybe in IRQ context of cmdq */ +static void dip_mdp_cb_func(struct cmdq_cb_data data) +{ + struct mtk_dip_request *req; + struct mtk_dip_dev *dip_dev; + + if (!data.data) { + pr_err("%s: data->data is NULL\n", + __func__); + return; + } + + req = data.data; + dip_dev = req->dip_pipe->dip_dev; + + dev_dbg(&dip_dev->pdev->dev, "%s: req(%p), idx(%d), no(%d), s(%d), n_in(%d), n_out(%d)\n", + __func__, + req, + req->img_fparam.frameparam.index, + req->img_fparam.frameparam.frame_no, + req->img_fparam.frameparam.state, + req->img_fparam.frameparam.num_inputs, + req->img_fparam.frameparam.num_outputs); + + if (data.sta != CMDQ_CB_NORMAL) { + dev_err(&dip_dev->pdev->dev, "%s: frame no(%d) HW timeout\n", + __func__, req->img_fparam.frameparam.frame_no); + req->img_fparam.frameparam.state = FRAME_STATE_HW_TIMEOUT; + INIT_WORK(&req->mdpcb_work, mdp_cb_timeout_worker); + queue_work(req->dip_pipe->dip_dev->dip_hw.mdpcb_workqueue, + &req->mdpcb_work); + } else { + mtk_dip_notify(req); + } +} + +static void dip_runner_func(struct work_struct *work) +{ + struct mtk_dip_request *req = mtk_dip_hw_mdp_work_to_req(work); + struct mtk_dip_dev *dip_dev = req->dip_pipe->dip_dev; + struct img_config *config_data = + (struct img_config *)req->img_fparam.frameparam.config_data.va; + u32 num; + + /* + * Call MDP/GCE API to do HW excecution + * Pass the framejob to MDP driver + */ + req->img_fparam.frameparam.state = FRAME_STATE_COMPOSING; + num = atomic_inc_return(&dip_dev->dip_hw.num_running); + dev_dbg(&dip_dev->pdev->dev, + "%s,MDP running num(%d)\n", __func__, num); + mdp_cmdq_sendtask(dip_dev->dip_hw.mdp_pdev, + config_data, + &req->img_fparam.frameparam, + NULL, + false, + dip_mdp_cb_func, + req); +} + +static void dip_scp_handler(void *data, unsigned int len, void *priv) +{ + struct mtk_dip_pipe_job_info *pipe_job_info; + struct mtk_dip_pipe *pipe; + int pipe_id; + struct mtk_dip_request *req; + struct img_ipi_frameparam *frameparam; + struct mtk_dip_dev *dip_dev = (struct mtk_dip_dev *)priv; + struct mtk_dip_hw *dip_hw = &dip_dev->dip_hw; + struct img_ipi_param *ipi_param; + u32 num; + int ret; + + if (WARN_ONCE(!data, "%s: failed due to NULL data\n", __func__)) + return; + + ipi_param = (struct img_ipi_param *)data; + + if (ipi_param->usage != IMG_IPI_FRAME) { + dev_dbg(&dip_dev->pdev->dev, + "%s: recevied SCP_IPI_DIP ACK, ipi_param.usage(%d)\n", + __func__, ipi_param->usage); + return; + } + + frameparam = (struct img_ipi_frameparam *)ipi_param->frm_param.va; + pipe_id = mtk_dip_pipe_get_pipe_from_job_id(frameparam->index); + pipe = mtk_dip_dev_get_pipe(dip_dev, pipe_id); + + if (!pipe) { + dev_warn(&dip_dev->pdev->dev, + "%s: get invalid img_ipi_frameparam index(%d) from firmware\n", + __func__, frameparam->frame_no); + return; + } + + pipe_job_info = mtk_dip_pipe_get_running_job_info(pipe, + frameparam->index); + + if (WARN_ONCE(!pipe_job_info, "%s: frame_no(%d) is lost\n", + __func__, frameparam->frame_no)) + return; + + req = mtk_dip_pipe_job_info_to_req(pipe_job_info); + memcpy(&req->img_fparam.frameparam, frameparam, + sizeof(req->img_fparam.frameparam)); + num = atomic_dec_return(&dip_hw->num_composing); + down(&dip_hw->sem); + + dev_dbg(&dip_dev->pdev->dev, + "%s: frame_no(%d) is back, composing num(%d)\n", + __func__, frameparam->frame_no, num); + + wake_up(&dip_dev->dip_hw.flushing_hw_wq); + + INIT_WORK(&req->mdp_work, dip_runner_func); + ret = queue_work(dip_hw->mdp_wq, &req->mdp_work); + if (!ret) { + dev_dbg(&dip_dev->pdev->dev, + "frame_no(%d) queue_work failed to mdp_wq: %d\n", + frameparam->frame_no, ret); + } +} + +static bool +mtk_dip_hw_is_working_buf_allocated(struct mtk_dip_request *req) +{ + req->working_buf = + mtk_dip_hw_working_buf_alloc(&req->dip_pipe->dip_dev->dip_hw); + + if (!req->working_buf) { + dev_dbg(&req->dip_pipe->dip_dev->pdev->dev, + "%s:%s:req(%p): no free working buffer available\n", + __func__, req->dip_pipe->desc->name, req); + return false; + } + + return true; +} + +static void dip_submit_worker(struct work_struct *work) +{ + struct mtk_dip_request *req = mtk_dip_hw_fw_work_to_req(work); + struct mtk_dip_hw *dip_hw = &req->dip_pipe->dip_dev->dip_hw; + struct mtk_dip_dev *dip_dev = req->dip_pipe->dip_dev; + struct img_ipi_param ipi_param; + struct mtk_dip_hw_subframe *buf; + int ret; + + dev_dbg(&dip_dev->pdev->dev, + "%s: to send frame_no(%d),num(%d)\n", + __func__, req->img_fparam.frameparam.frame_no, + atomic_read(&dip_hw->num_composing)); + + wait_event_freezable(dip_hw->working_buf_wq, + mtk_dip_hw_is_working_buf_allocated(req)); + up(&dip_hw->sem); + + dev_dbg(&dip_dev->pdev->dev, + "%s: wakeup frame_no(%d),num(%d)\n", + __func__, req->img_fparam.frameparam.frame_no, + atomic_read(&dip_hw->num_composing)); + + buf = req->working_buf; + mtk_dip_wbuf_to_ipi_img_addr(&req->img_fparam.frameparam.subfrm_data, + &buf->buffer); + memset(buf->buffer.vaddr, 0, DIP_SUB_FRM_SZ); + mtk_dip_wbuf_to_ipi_img_sw_addr(&req->img_fparam.frameparam.config_data, + &buf->config_data); + memset(buf->config_data.vaddr, 0, DIP_COMP_SZ); + + if (!req->img_fparam.frameparam.tuning_data.present) { + /* + * When user enqueued without tuning buffer, + * it would use driver internal buffer. + */ + dev_dbg(&dip_dev->pdev->dev, + "%s: frame_no(%d) has no tuning_data\n", + __func__, req->img_fparam.frameparam.frame_no); + + mtk_dip_wbuf_to_ipi_tuning_addr + (&req->img_fparam.frameparam.tuning_data, + &buf->tuning_buf); + memset(buf->tuning_buf.vaddr, 0, DIP_TUNING_SZ); + } + + req->img_fparam.frameparam.state = FRAME_STATE_COMPOSING; + mtk_dip_wbuf_to_ipi_img_sw_addr(&req->img_fparam.frameparam.self_data, + &buf->frameparam); + memcpy(buf->frameparam.vaddr, &req->img_fparam.frameparam, + sizeof(req->img_fparam.frameparam)); + + ipi_param.usage = IMG_IPI_FRAME; + mtk_dip_wbuf_to_ipi_img_sw_addr(&ipi_param.frm_param, + &buf->frameparam); + + mutex_lock(&dip_hw->hw_op_lock); + atomic_inc(&dip_hw->num_composing); + ret = scp_ipi_send(dip_hw->scp_pdev, SCP_IPI_DIP, &ipi_param, + sizeof(ipi_param), 0); + if (ret) + dev_dbg(&dip_dev->pdev->dev, "%s: send SCP_IPI_DIP_FRAME failed %d\n", + __func__, ret); + mutex_unlock(&dip_hw->hw_op_lock); + + dev_dbg(&dip_dev->pdev->dev, + "%s: frame_no(%d),idx(0x%x), composing num(%d)\n", + __func__, req->img_fparam.frameparam.frame_no, + req->img_fparam.frameparam.index, + atomic_read(&dip_hw->num_composing)); +} + +static int mtk_dip_hw_res_init(struct mtk_dip_hw *dip_hw) +{ + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); + int ret; + + dip_hw->mdp_pdev = mdp_get_plat_device(dip_dev->pdev); + if (!dip_hw->mdp_pdev) { + dev_dbg(&dip_dev->pdev->dev, + "%s: failed to get MDP device\n", + __func__); + return -EINVAL; + } + + dip_hw->mdpcb_workqueue = + alloc_ordered_workqueue("%s", + __WQ_LEGACY | WQ_MEM_RECLAIM | + WQ_FREEZABLE, + "mdp_callback"); + if (!dip_hw->mdpcb_workqueue) { + dev_err(&dip_dev->pdev->dev, + "%s: unable to alloc mdpcb workqueue\n", __func__); + ret = -ENOMEM; + goto destroy_mdpcb_wq; + } + + dip_hw->composer_wq = + alloc_ordered_workqueue("%s", + __WQ_LEGACY | WQ_MEM_RECLAIM | + WQ_FREEZABLE, + "dip_composer"); + if (!dip_hw->composer_wq) { + dev_err(&dip_dev->pdev->dev, + "%s: unable to alloc composer workqueue\n", __func__); + ret = -ENOMEM; + goto destroy_dip_composer_wq; + } + + dip_hw->mdp_wq = + alloc_ordered_workqueue("%s", + __WQ_LEGACY | WQ_MEM_RECLAIM | + WQ_FREEZABLE, + "dip_runner"); + if (!dip_hw->mdp_wq) { + dev_err(&dip_dev->pdev->dev, + "%s: unable to alloc dip_runner\n", __func__); + ret = -ENOMEM; + goto destroy_dip_runner_wq; + } + + init_waitqueue_head(&dip_hw->flushing_wq); + init_waitqueue_head(&dip_hw->flushing_hw_wq); + + return 0; + +destroy_dip_runner_wq: + destroy_workqueue(dip_hw->mdp_wq); + +destroy_dip_composer_wq: + destroy_workqueue(dip_hw->composer_wq); + +destroy_mdpcb_wq: + destroy_workqueue(dip_hw->mdpcb_workqueue); + + return ret; +} + +static int mtk_dip_hw_res_release(struct mtk_dip_dev *dip_dev) +{ + flush_workqueue(dip_dev->dip_hw.mdp_wq); + destroy_workqueue(dip_dev->dip_hw.mdp_wq); + dip_dev->dip_hw.mdp_wq = NULL; + + flush_workqueue(dip_dev->dip_hw.mdpcb_workqueue); + destroy_workqueue(dip_dev->dip_hw.mdpcb_workqueue); + dip_dev->dip_hw.mdpcb_workqueue = NULL; + + flush_workqueue(dip_dev->dip_hw.composer_wq); + destroy_workqueue(dip_dev->dip_hw.composer_wq); + dip_dev->dip_hw.composer_wq = NULL; + + atomic_set(&dip_dev->dip_hw.num_composing, 0); + atomic_set(&dip_dev->dip_hw.num_running, 0); + atomic_set(&dip_dev->dip_hw.dip_enque_cnt, 0); + + return 0; +} + +static bool mtk_dip_pipe_running_job_list_empty(struct mtk_dip_pipe *pipe, + int *num) +{ + spin_lock(&pipe->job_lock); + *num = pipe->num_jobs; + spin_unlock(&pipe->job_lock); + + return !(*num); +} + +static int mtk_dip_hw_flush_pipe_jobs(struct mtk_dip_pipe *pipe) +{ + int num; + int ret = wait_event_freezable_timeout + (pipe->dip_dev->dip_hw.flushing_wq, + mtk_dip_pipe_running_job_list_empty(pipe, &num), + msecs_to_jiffies(DIP_FLUSHING_WQ_TIMEOUT)); + + if (!ret && num) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s: flushing is aborted, num(%d)\n", + __func__, num); + return -EINVAL; + } + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s: wakeup num(%d)\n", __func__, num); + return 0; +} + +static int mtk_dip_hw_connect(struct mtk_dip_dev *dip_dev) +{ + int ret; + struct img_ipi_param ipi_param; + + pm_runtime_get_sync(&dip_dev->pdev->dev); + + scp_ipi_register(dip_dev->dip_hw.scp_pdev, SCP_IPI_DIP, dip_scp_handler, + dip_dev); + memset(&ipi_param, 0, sizeof(ipi_param)); + ipi_param.usage = IMG_IPI_INIT; + ret = scp_ipi_send(dip_dev->dip_hw.scp_pdev, SCP_IPI_DIP, &ipi_param, + sizeof(ipi_param), 200); + if (ret) { + dev_dbg(&dip_dev->pdev->dev, "%s: send SCP_IPI_DIP_FRAME failed %d\n", + __func__, ret); + return -EBUSY; + } + + pm_runtime_put_autosuspend(&dip_dev->pdev->dev); + + ret = mtk_dip_hw_res_init(&dip_dev->dip_hw); + if (ret) { + dev_err(&dip_dev->pdev->dev, + "%s: mtk_dip_hw_res_init failed(%d)\n", __func__, ret); + + return -EBUSY; + } + + return 0; +} + +static void mtk_dip_hw_disconnect(struct mtk_dip_dev *dip_dev) +{ + int ret; + + ret = mtk_dip_hw_res_release(dip_dev); + if (ret) + dev_err(&dip_dev->pdev->dev, + "%s: mtk_dip_hw_res_release failed ret(%d)\n", + __func__, ret); +} + +int mtk_dip_hw_streamon(struct mtk_dip_pipe *pipe) +{ + struct mtk_dip_dev *dip_dev = pipe->dip_dev; + int count, ret; + + mutex_lock(&dip_dev->dip_hw.hw_op_lock); + count = atomic_read(&dip_dev->dip_hw.dip_stream_cnt); + if (!count) { + ret = mtk_dip_hw_connect(pipe->dip_dev); + if (ret) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s:%s: pipe(%d) connect to dip_hw failed\n", + __func__, pipe->desc->name, pipe->desc->id); + + mutex_unlock(&dip_dev->dip_hw.hw_op_lock); + + return ret; + } + + count = atomic_inc_return(&dip_dev->dip_hw.dip_stream_cnt); + } + mutex_unlock(&dip_dev->dip_hw.hw_op_lock); + + mutex_lock(&pipe->lock); + pipe->streaming = 1; + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s: started stream, id(%d), stream cnt(%d)\n", + __func__, pipe->desc->name, pipe->desc->id, count); + mtk_dip_pipe_try_enqueue(pipe); + mutex_unlock(&pipe->lock); + + return 0; +} + +int mtk_dip_hw_streamoff(struct mtk_dip_pipe *pipe) +{ + struct mtk_dip_dev *dip_dev = pipe->dip_dev; + struct mtk_dip_pipe_job_info *job_info; + struct mtk_dip_pipe_job_info *tmp_job_info; + s32 count; + int ret; + + mutex_lock(&pipe->lock); + dev_dbg(&dip_dev->pdev->dev, + "%s:%s: streamoff, removing all running jobs\n", + __func__, pipe->desc->name); + + spin_lock(&pipe->job_lock); + list_for_each_entry_safe(job_info, tmp_job_info, + &pipe->pipe_job_running_list, list) { + struct mtk_dip_request *req = + mtk_dip_pipe_job_info_to_req(job_info); + int i; + + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) { + struct mtk_dip_dev_buffer *dev_buf = + job_info->buf_map[i]; + struct mtk_dip_video_device *node; + + if (!dev_buf) + continue; + + node = mtk_dip_vbq_to_node + (dev_buf->vbb.vb2_buf.vb2_queue); + vb2_buffer_done(&dev_buf->vbb.vb2_buf, + VB2_BUF_STATE_ERROR); + dev_dbg(&dip_dev->pdev->dev, + "%s:%s: return buf, idx(%d), state(%d)\n", + pipe->desc->name, node->desc->name, + dev_buf->vbb.vb2_buf.index, + VB2_BUF_STATE_ERROR); + } + + pipe->num_jobs--; + list_del(&job_info->list); + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s: not run job, id(%d), no(%d), state(%d), job cnt(%d)\n", + __func__, pipe->desc->name, job_info->id, + req->img_fparam.frameparam.frame_no, + VB2_BUF_STATE_ERROR, pipe->num_jobs); + } + spin_unlock(&pipe->job_lock); + + ret = mtk_dip_hw_flush_pipe_jobs(pipe); + if (WARN_ON(ret != 0)) { + dev_err(&dip_dev->pdev->dev, + "%s:%s: mtk_dip_hw_flush_pipe_jobs, ret(%d)\n", + __func__, pipe->desc->name, ret); + } + + pipe->streaming = 0; + mutex_unlock(&pipe->lock); + + mutex_lock(&dip_dev->dip_hw.hw_op_lock); + count = atomic_read(&dip_dev->dip_hw.dip_stream_cnt); + if (count > 0 && atomic_dec_and_test(&dip_dev->dip_hw.dip_stream_cnt)) { + mtk_dip_hw_disconnect(dip_dev); + + dev_dbg(&dip_dev->pdev->dev, "%s: dip_hw disconnected, stream cnt(%d)\n", + __func__, atomic_read(&dip_dev->dip_hw.dip_stream_cnt)); + } + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s: stopped stream id(%d), stream cnt(%d)\n", + __func__, pipe->desc->name, pipe->desc->id, count); + + mutex_unlock(&dip_dev->dip_hw.hw_op_lock); + + return 0; +} + +void mtk_dip_hw_enqueue(struct mtk_dip_hw *dip_hw, + struct mtk_dip_request *req) +{ + struct img_ipi_frameparam *frameparams = &req->img_fparam.frameparam; + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); + int ret; + struct mtk_dip_dev_buffer **map = req->job_info.buf_map; + + /* + * Workaround to pass v4l2 compliance test when it pass only one buffer + * to DIP. The check is already done in request_validate(). + */ + if (!map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT] || + (!map[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE] && + !map[MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE])){ + dev_dbg(&dip_dev->pdev->dev, + "won't trigger hw job: raw(%p), mdp0(%p), mdp1(%p)\n", + map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT], + map[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE], + map[MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE]); + + mtk_dip_pipe_job_finish(req->dip_pipe, req->job_info.id, + VB2_BUF_STATE_DONE); + return; + } + + mtk_dip_pipe_ipi_params_config(req); + frameparams->state = FRAME_STATE_INIT; + frameparams->frame_no = atomic_inc_return(&dip_hw->dip_enque_cnt); + + dev_dbg(&dip_dev->pdev->dev, + "%s: hw job id(%d), frame_no(%d) into worklist\n", + __func__, frameparams->index, frameparams->frame_no); + + INIT_WORK(&req->fw_work, dip_submit_worker); + pm_runtime_get_sync(&dip_dev->pdev->dev); + ret = queue_work(dip_hw->composer_wq, &req->fw_work); + if (!ret) + dev_dbg(&dip_dev->pdev->dev, + "frame_no(%d) queue_work failed, already on a queue\n", + frameparams->frame_no, ret); +} diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c new file mode 100644 index 000000000000..7b454952566f --- /dev/null +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c @@ -0,0 +1,1786 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 MediaTek Inc. + * + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> + * + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_data/mtk_scp.h> +#include <linux/pm_runtime.h> +#include <linux/remoteproc.h> +#include <linux/videodev2.h> +#include <media/videobuf2-dma-contig.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-subdev.h> +#include <media/v4l2-event.h> +#include "mtk_dip-dev.h" +#include "mtk_dip-hw.h" +#include "mtk-mdp3-regs.h" + +static int mtk_dip_subdev_open(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh) +{ + struct mtk_dip_pipe *pipe = mtk_dip_subdev_to_pipe(sd); + + dev_dbg(&pipe->dip_dev->pdev->dev, "%s:%s: pipe(%d) open\n", + __func__, pipe->desc->name, pipe->desc->id); + + pipe->fh = fh; + + return 0; +} + +static int mtk_dip_subdev_close(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh) +{ + struct mtk_dip_pipe *pipe = mtk_dip_subdev_to_pipe(sd); + + dev_dbg(&pipe->dip_dev->pdev->dev, "%s:%s: pipe(%d) close\n", + __func__, pipe->desc->name, pipe->desc->id); + + return 0; +} + +static int mtk_dip_subdev_s_stream(struct v4l2_subdev *sd, + int enable) +{ + struct mtk_dip_pipe *pipe = mtk_dip_subdev_to_pipe(sd); + int ret; + + if (enable) { + ret = mtk_dip_hw_streamon(pipe); + if (ret) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s:%s: pipe(%d) streamon failed\n", + __func__, pipe->desc->name, pipe->desc->id); + } + + return ret; + } + + ret = mtk_dip_hw_streamoff(pipe); + if (ret) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s:%s: pipe(%d) streamon off with errors\n", + __func__, pipe->desc->name, pipe->desc->id); + } + + return ret; +} + +static int mtk_dip_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, + u32 flags) +{ + struct mtk_dip_pipe *pipe = + container_of(entity, struct mtk_dip_pipe, subdev.entity); + u32 pad = local->index; + int count; + + WARN_ON(entity->obj_type != MEDIA_ENTITY_TYPE_V4L2_SUBDEV); + WARN_ON(pad >= pipe->num_nodes); + + mutex_lock(&pipe->lock); + if (!vb2_start_streaming_called(&pipe->nodes[pad].dev_q.vbq)) { + int enable = flags & MEDIA_LNK_FL_ENABLED; + int node_enabled = + pipe->nodes[pad].flags & MEDIA_LNK_FL_ENABLED; + + if (enable && !node_enabled) + atomic_inc_return(&pipe->cnt_nodes_not_streaming); + + if (!enable && node_enabled) + atomic_dec_return(&pipe->cnt_nodes_not_streaming); + } + pipe->nodes[pad].flags &= ~(MEDIA_LNK_FL_ENABLED); + pipe->nodes[pad].flags |= MEDIA_LNK_FL_ENABLED & flags; + count = atomic_read(&pipe->cnt_nodes_not_streaming); + mutex_unlock(&pipe->lock); + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s: link setup, flags(0x%x), (%s)%d -->(%s)%d, cnt_nodes_ns(%d)\n", + pipe->desc->name, flags, local->entity->name, local->index, + remote->entity->name, remote->index, count); + + return 0; +} + +static int mtk_dip_vb2_buf_prepare(struct vb2_buffer *vb) +{ + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vb->vb2_queue); + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vb->vb2_queue); + struct device *dev = &pipe->dip_dev->pdev->dev; + const struct v4l2_format *fmt = &node->vdev_fmt; + unsigned int size; + int i; + + if (vb->vb2_queue->type == V4L2_BUF_TYPE_META_CAPTURE || + vb->vb2_queue->type == V4L2_BUF_TYPE_META_OUTPUT){ + if (vb->planes[0].length < fmt->fmt.meta.buffersize) { + dev_dbg(dev, + "%s:%s:%s: size error(user:%d, required:%d)\n", + __func__, pipe->desc->name, node->desc->name, + vb->planes[0].length, fmt->fmt.meta.buffersize); + return -EINVAL; + } else { + return 0; + } + } + + for (i = 0; i < vb->num_planes; i++) { + size = fmt->fmt.pix_mp.plane_fmt[i].sizeimage; + if (vb->planes[i].length < size) { + dev_dbg(dev, + "%s:%s:%s: size error(user:%d, max:%d)\n", + __func__, pipe->desc->name, node->desc->name, + vb->planes[i].length, size); + return -EINVAL; + } + } + + return 0; +} + +static int mtk_dip_vb2_buf_out_validate(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *v4l2_buf = to_vb2_v4l2_buffer(vb); + + if (v4l2_buf->field == V4L2_FIELD_ANY) + v4l2_buf->field = V4L2_FIELD_NONE; + + if (v4l2_buf->field != V4L2_FIELD_NONE) + return -EINVAL; + + return 0; +} + +static int mtk_dip_vb2_queue_buf_init(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *b = to_vb2_v4l2_buffer(vb); + struct mtk_dip_dev_buffer *dev_buf = mtk_dip_vb2_buf_to_dev_buf(vb); + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vb->vb2_queue); + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vb->vb2_queue); + int i; + + for (i = 0; i < vb->num_planes; i++) { + if (node->desc->smem_alloc) { + void *cpu_addr; + phys_addr_t buf_paddr; + + dev_buf->scp_daddr[i] = + vb2_dma_contig_plane_dma_addr(vb, i); + cpu_addr = vb2_plane_vaddr(vb, i); + if (!cpu_addr) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s:%s: vb2_plane_vaddr NULL: s_daddr(%pad)\n", + pipe->desc->name, node->desc->name, + &dev_buf->scp_daddr[i]); + return -EINVAL; + } + + /* + * We got the incorrect physical address mapped when + * using dma_map_single() so I used dma_map_page_attrs() + * directly to workaround here. Please see the detail in + * mtk_dip-sys.c + */ + buf_paddr = dev_buf->scp_daddr[i]; + dev_buf->isp_daddr[i] = + dma_map_page_attrs(&pipe->dip_dev->pdev->dev, + phys_to_page(buf_paddr), + 0, vb->planes[i].length, + DMA_BIDIRECTIONAL, + DMA_ATTR_SKIP_CPU_SYNC); + if (dma_mapping_error(&pipe->dip_dev->pdev->dev, + dev_buf->isp_daddr[i])) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s:%s: failed to map buffer: s_daddr(%pad)\n", + pipe->desc->name, node->desc->name, + &dev_buf->scp_daddr[i]); + return -EINVAL; + } + } else { + dev_buf->scp_daddr[i] = 0; + dev_buf->isp_daddr[i] = + vb2_dma_contig_plane_dma_addr(vb, i); + } + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s: buf type(%d), idx(%d), mem(%d), p(%d) i_daddr(%pad), s_daddr(%pad)\n", + pipe->desc->name, node->desc->name, b->vb2_buf.type, + b->vb2_buf.index, b->vb2_buf.memory, i, + &dev_buf->isp_daddr[i], &dev_buf->scp_daddr[i]); + } + + return 0; +} + +static void mtk_dip_vb2_queue_buf_cleanup(struct vb2_buffer *vb) +{ + struct mtk_dip_dev_buffer *dev_buf = mtk_dip_vb2_buf_to_dev_buf(vb); + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vb->vb2_queue); + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vb->vb2_queue); + int i; + + if (!node->desc->smem_alloc) + return; + + for (i = 0; i < vb->num_planes; i++) { + if (node->desc->smem_alloc) + dma_unmap_page_attrs(&pipe->dip_dev->pdev->dev, + dev_buf->isp_daddr[i], + vb->planes[i].length, + DMA_BIDIRECTIONAL, + DMA_ATTR_SKIP_CPU_SYNC); + } +} + +static void mtk_dip_vb2_buf_queue(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *b = to_vb2_v4l2_buffer(vb); + struct mtk_dip_dev_buffer *dev_buf = mtk_dip_vb2_buf_to_dev_buf(vb); + struct mtk_dip_request *req = (struct mtk_dip_request *)vb->request; + struct mtk_dip_video_device *node = + mtk_dip_vbq_to_node(vb->vb2_queue); + int buf_count; + + dev_buf->fmt = node->vdev_fmt; + dev_buf->dev_fmt = node->dev_q.dev_fmt; + dev_buf->dma_port = node->desc->dma_port; + dev_buf->rotation = node->dev_q.rotation; + + dev_dbg(&req->dip_pipe->dip_dev->pdev->dev, + "%s:%s: buf type(%d), idx(%d), mem(%d), i_daddr(%pad), s_daddr(%pad)\n", + req->dip_pipe->desc->name, node->desc->name, b->vb2_buf.type, + b->vb2_buf.index, b->vb2_buf.memory, &dev_buf->isp_daddr, + &dev_buf->scp_daddr); + + spin_lock(&node->buf_list_lock); + list_add_tail(&dev_buf->list, &node->buf_list); + spin_unlock(&node->buf_list_lock); + + buf_count = atomic_dec_return(&req->buf_count); + if (!buf_count) { + mutex_lock(&req->dip_pipe->lock); + mtk_dip_pipe_try_enqueue(req->dip_pipe); + mutex_unlock(&req->dip_pipe->lock); + } + + dev_dbg(&req->dip_pipe->dip_dev->pdev->dev, + "%s:%s:%s:%s:buf_count(%d)\n", + __func__, req->dip_pipe->desc->name, node->desc->name, + req->req.debug_str, buf_count); +} + +static int mtk_dip_vb2_queue_setup(struct vb2_queue *vq, + unsigned int *num_buffers, + unsigned int *num_planes, + unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vq); + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vq); + const struct v4l2_format *fmt = &node->vdev_fmt; + unsigned int size; + int i; + + vq->dma_attrs |= DMA_ATTR_NON_CONSISTENT; + + if (!*num_planes) { + *num_planes = 1; + sizes[0] = fmt->fmt.pix_mp.plane_fmt[0].sizeimage; + } + + if (node->desc->id == MTK_DIP_VIDEO_NODE_ID_TUNING_OUT) { + int max_meta_bufs_per_pipe; + + size = fmt->fmt.meta.buffersize; + max_meta_bufs_per_pipe = + MTK_DIP_DEV_META_BUF_POOL_MAX_SIZE / + round_up(size, PAGE_SIZE) / MTK_DIP_PIPE_ID_TOTAL_NUM; + *num_buffers = clamp_val(*num_buffers, 1, + max_meta_bufs_per_pipe); + sizes[0] = size; + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s:%s: n_p(%d), n_b(%d), s[%d](%u)\n", + __func__, pipe->desc->name, node->desc->name, + *num_planes, *num_buffers, 0, sizes[0]); + + } else { + for (i = 0; i < *num_planes; i++) { + if (sizes[i] < fmt->fmt.pix_mp.plane_fmt[i].sizeimage) { + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s:%s: invalid buf: %u < %u\n", + __func__, pipe->desc->name, + node->desc->name, sizes[0], size); + return -EINVAL; + } + sizes[i] = fmt->fmt.pix_mp.plane_fmt[i].sizeimage; + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s:%s: n_p(%d), n_b(%d), s[%d](%u)\n", + __func__, pipe->desc->name, node->desc->name, + *num_planes, *num_buffers, i, sizes[i]); + } + } + + return 0; +} + +static void mtk_dip_return_all_buffers(struct mtk_dip_pipe *pipe, + struct mtk_dip_video_device *node, + enum vb2_buffer_state state) +{ + struct mtk_dip_dev_buffer *b, *b0; + + spin_lock(&node->buf_list_lock); + list_for_each_entry_safe(b, b0, &node->buf_list, list) { + list_del(&b->list); + if (b->vbb.vb2_buf.state == VB2_BUF_STATE_ACTIVE) + vb2_buffer_done(&b->vbb.vb2_buf, state); + } + spin_unlock(&node->buf_list_lock); +} + +static int mtk_dip_vb2_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vq); + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vq); + int cnt_node_ns; + int ret; + + if (!(node->flags & MEDIA_LNK_FL_ENABLED)) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s:%s: stream on failed, node is not enabled\n", + pipe->desc->name, node->desc->name); + + ret = -ENOLINK; + goto fail_return_bufs; + } + + mutex_lock(&pipe->lock); + cnt_node_ns = atomic_dec_return(&pipe->cnt_nodes_not_streaming); + mutex_unlock(&pipe->lock); + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s:%s cnt_nodes_not_streaming(%d)\n", + __func__, pipe->desc->name, node->desc->name, cnt_node_ns); + + if (cnt_node_ns) + return 0; + + ret = media_pipeline_start(&node->vdev.entity, &pipe->pipeline); + if (ret < 0) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s:%s: media_pipeline_start failed(%d)\n", + pipe->desc->name, node->desc->name, ret); + + goto fail_return_bufs; + } + + /* Start streaming of the whole pipeline */ + ret = v4l2_subdev_call(&pipe->subdev, video, s_stream, 1); + if (ret < 0) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s:%s: sub dev s_stream(1) failed(%d)\n", + pipe->desc->name, node->desc->name, ret); + + goto fail_stop_pipeline; + } + + return 0; + +fail_stop_pipeline: + media_pipeline_stop(&node->vdev.entity); + +fail_return_bufs: + mtk_dip_return_all_buffers(pipe, node, VB2_BUF_STATE_QUEUED); + + return ret; +} + +static void mtk_dip_vb2_stop_streaming(struct vb2_queue *vq) +{ + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vq); + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vq); + int ret; + int count; + int is_pipe_streamon; + + WARN_ON(!(node->flags & MEDIA_LNK_FL_ENABLED)); + + mutex_lock(&pipe->lock); + count = atomic_inc_return(&pipe->cnt_nodes_not_streaming); + is_pipe_streamon = pipe->streaming; + mutex_unlock(&pipe->lock); + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s:%s cnt_nodes_not_streaming(%d), is_pipe_streamon(%d)\n", + __func__, pipe->desc->name, node->desc->name, count, + is_pipe_streamon); + + if (count && is_pipe_streamon) { + ret = v4l2_subdev_call(&pipe->subdev, video, s_stream, 0); + if (ret) + dev_err(&pipe->dip_dev->pdev->dev, + "%s:%s: sub dev s_stream(0) failed(%d)\n", + pipe->desc->name, node->desc->name, ret); + media_pipeline_stop(&node->vdev.entity); + } + + mtk_dip_return_all_buffers(pipe, node, VB2_BUF_STATE_ERROR); +} + +static int mtk_dip_videoc_querycap(struct file *file, void *fh, + struct v4l2_capability *cap) +{ + struct mtk_dip_pipe *pipe = video_drvdata(file); + + strlcpy(cap->driver, pipe->desc->name, + sizeof(cap->driver)); + strlcpy(cap->card, pipe->desc->name, + sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "platform:%s", dev_name(pipe->dip_dev->mdev.dev)); + + return 0; +} + +static int mtk_dip_videoc_try_fmt(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct mtk_dip_pipe *pipe = video_drvdata(file); + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); + const struct mtk_dip_dev_format *dev_fmt; + struct v4l2_format try_fmt; + + memset(&try_fmt, 0, sizeof(try_fmt)); + try_fmt.type = node->dev_q.vbq.type; + dev_fmt = mtk_dip_pipe_find_fmt(pipe, node, + f->fmt.pix_mp.pixelformat); + + if (!dev_fmt) { + dev_fmt = &node->desc->fmts[node->desc->default_fmt_idx]; + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s:%s: dev_fmt(%d) not found, use default(%d)\n", + __func__, pipe->desc->name, node->desc->name, + f->fmt.pix_mp.pixelformat, dev_fmt->format); + } + + if (V4L2_TYPE_IS_OUTPUT(node->desc->buf_type)) { + try_fmt.fmt.pix_mp.width = clamp_val(f->fmt.pix_mp.width, + MTK_DIP_OUTPUT_MIN_WIDTH, + MTK_DIP_OUTPUT_MAX_WIDTH); + try_fmt.fmt.pix_mp.height = + clamp_val(f->fmt.pix_mp.height, + MTK_DIP_OUTPUT_MIN_HEIGHT, + MTK_DIP_OUTPUT_MAX_HEIGHT); + } else { + try_fmt.fmt.pix_mp.width = clamp_val(f->fmt.pix_mp.width, + MTK_DIP_CAPTURE_MIN_WIDTH, + MTK_DIP_CAPTURE_MAX_WIDTH); + try_fmt.fmt.pix_mp.height = + clamp_val(f->fmt.pix_mp.height, + MTK_DIP_CAPTURE_MIN_HEIGHT, + MTK_DIP_CAPTURE_MAX_HEIGHT); + } + + node->dev_q.dev_fmt = dev_fmt; + try_fmt.fmt.pix_mp.field = V4L2_FIELD_NONE; + mtk_dip_pipe_set_img_fmt(pipe, node, &try_fmt.fmt.pix_mp, dev_fmt); + + *f = try_fmt; + + return 0; +} + +static int mtk_dip_videoc_g_fmt(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); + + *f = node->vdev_fmt; + + return 0; +} + +static int mtk_dip_videoc_s_fmt(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); + struct mtk_dip_pipe *pipe = video_drvdata(file); + int ret; + + if (pipe->streaming) + return -EBUSY; + + ret = mtk_dip_videoc_try_fmt(file, fh, f); + if (!ret) + node->vdev_fmt = *f; + + return ret; +} + +static int mtk_dip_videoc_enum_framesizes(struct file *file, void *priv, + struct v4l2_frmsizeenum *sizes) +{ + struct mtk_dip_pipe *pipe = video_drvdata(file); + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); + const struct mtk_dip_dev_format *dev_fmt; + + dev_fmt = mtk_dip_pipe_find_fmt(pipe, node, sizes->pixel_format); + + if (!dev_fmt || sizes->index) + return -EINVAL; + + sizes->type = node->desc->frmsizeenum->type; + sizes->stepwise.max_width = + node->desc->frmsizeenum->stepwise.max_width; + sizes->stepwise.min_width = + node->desc->frmsizeenum->stepwise.min_width; + sizes->stepwise.max_height = + node->desc->frmsizeenum->stepwise.max_height; + sizes->stepwise.min_height = + node->desc->frmsizeenum->stepwise.min_height; + sizes->stepwise.step_height = + node->desc->frmsizeenum->stepwise.step_height; + sizes->stepwise.step_width = + node->desc->frmsizeenum->stepwise.step_width; + + return 0; +} + +static int mtk_dip_videoc_enum_fmt(struct file *file, void *fh, + struct v4l2_fmtdesc *f) +{ + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); + + if (f->index >= node->desc->num_fmts) + return -EINVAL; + + strscpy(f->description, node->desc->description, + sizeof(f->description)); + f->pixelformat = node->desc->fmts[f->index].format; + f->flags = 0; + + return 0; +} + +static int mtk_dip_meta_enum_format(struct file *file, void *fh, + struct v4l2_fmtdesc *f) +{ + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); + + if (f->index > 0) + return -EINVAL; + + strscpy(f->description, node->desc->description, + sizeof(f->description)); + + f->pixelformat = node->vdev_fmt.fmt.meta.dataformat; + f->flags = 0; + + return 0; +} + +static int mtk_dip_videoc_g_meta_fmt(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); + *f = node->vdev_fmt; + + return 0; +} + +static int handle_buf_rotate_config(struct v4l2_ctrl *ctrl) +{ + struct mtk_dip_video_device *node = + container_of(ctrl->handler, struct mtk_dip_video_device, + ctrl_handler); + + if (ctrl->val != 0 && ctrl->val != 90 && + ctrl->val != 180 && ctrl->val != 270) { + pr_err("%s: Invalid buffer rotation %d", node->desc->name, + ctrl->val); + return -EINVAL; + } + + node->dev_q.rotation = ctrl->val; + + return 0; +} + +static int mtk_dip_video_device_s_ctrl(struct v4l2_ctrl *ctrl) +{ + int ret = 0; + + switch (ctrl->id) { + case V4L2_CID_ROTATE: + ret = handle_buf_rotate_config(ctrl); + break; + default: + break; + } + + return ret; +} + +/******************** function pointers ********************/ + +static const struct v4l2_subdev_internal_ops mtk_dip_subdev_internal_ops = { + .open = mtk_dip_subdev_open, + .close = mtk_dip_subdev_close, +}; + +static const struct v4l2_subdev_video_ops mtk_dip_subdev_video_ops = { + .s_stream = mtk_dip_subdev_s_stream, +}; + +static const struct v4l2_subdev_ops mtk_dip_subdev_ops = { + .video = &mtk_dip_subdev_video_ops, +}; + +static const struct media_entity_operations mtk_dip_media_ops = { + .link_setup = mtk_dip_link_setup, + .link_validate = v4l2_subdev_link_validate, +}; + +static struct media_request *mtk_dip_request_alloc(struct media_device *mdev) +{ + return kzalloc(sizeof(struct mtk_dip_request), GFP_KERNEL); +} + +static void mtk_dip_request_free(struct media_request *req) +{ + kfree(req); +} + +static int mtk_dip_vb2_request_validate(struct media_request *req) +{ + struct media_request_object *obj; + struct mtk_dip_dev *dip_dev = mtk_dip_mdev_to_dev(req->mdev); + struct mtk_dip_request *dip_req = (struct mtk_dip_request *)req; + struct mtk_dip_pipe *pipe = NULL; + struct mtk_dip_pipe *pipe_prev = NULL; + struct mtk_dip_dev_buffer **map = dip_req->job_info.buf_map; + int buf_count = 0; + + memset(map, 0, sizeof(dip_req->job_info.buf_map)); + + list_for_each_entry(obj, &req->objects, list) { + struct vb2_buffer *vb; + struct mtk_dip_dev_buffer *dev_buf; + struct mtk_dip_video_device *node; + + if (!vb2_request_object_is_buffer(obj)) + continue; + + vb = container_of(obj, struct vb2_buffer, req_obj); + node = mtk_dip_vbq_to_node(vb->vb2_queue); + pipe = vb2_get_drv_priv(vb->vb2_queue); + if (pipe_prev && pipe != pipe_prev) { + dev_warn(&dip_dev->pdev->dev, + "%s:%s:%s:found buf of different pipes(%p,%p)\n", + __func__, node->desc->name, + req->debug_str, pipe, pipe_prev); + return -EINVAL; + } + + pipe_prev = pipe; + dev_buf = mtk_dip_vb2_buf_to_dev_buf(vb); + dip_req->job_info.buf_map[node->desc->id] = dev_buf; + buf_count++; + + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s: added buf(%p) to pipe-job(%p), buf_count(%d)\n", + pipe->desc->name, node->desc->name, dev_buf, + dip_req->job_info, buf_count); + } + + if (!pipe) { + dev_warn(&dip_dev->pdev->dev, + "%s: no buffer in the request(%p)\n", + req->debug_str, req); + + return vb2_request_validate(req); + } + + /* + * Workaround to pass V4L2 comliance test since it can't know + * which buffer is required and may enqueue only 1 buffer. + * It seems that we should return an error here and let the + * user to enqueue required buffer instead of showing a debug + * message only. + */ + if (!map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT] || + (!map[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE] && + !map[MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE])) + dev_dbg(&dip_dev->pdev->dev, + "won't trigger hw job: raw(%p), mdp0(%p), mdp1(%p)\n", + map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT], + map[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE], + map[MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE]); + + atomic_set(&dip_req->buf_count, buf_count); + dip_req->job_info.id = mtk_dip_pipe_next_job_id(pipe); + dip_req->dip_pipe = pipe; + mtk_dip_pipe_debug_job(pipe, &dip_req->job_info); + + spin_lock(&pipe->job_lock); + list_add_tail(&dip_req->job_info.list, &pipe->pipe_job_pending_list); + pipe->num_pending_jobs++; + dev_dbg(&dip_dev->pdev->dev, + "%s:%s: current num of pending jobs(%d)\n", + __func__, pipe->desc->name, pipe->num_pending_jobs); + spin_unlock(&pipe->job_lock); + + return vb2_request_validate(req); +} + +static const struct media_device_ops mtk_dip_media_req_ops = { + .req_validate = mtk_dip_vb2_request_validate, + .req_queue = vb2_request_queue, + .req_alloc = mtk_dip_request_alloc, + .req_free = mtk_dip_request_free, +}; + +static const struct v4l2_ctrl_ops mtk_dip_video_device_ctrl_ops = { + .s_ctrl = mtk_dip_video_device_s_ctrl, +}; + +static const struct vb2_ops mtk_dip_vb2_ops = { + .buf_queue = mtk_dip_vb2_buf_queue, + .queue_setup = mtk_dip_vb2_queue_setup, + .buf_init = mtk_dip_vb2_queue_buf_init, + .buf_prepare = mtk_dip_vb2_buf_prepare, + .buf_out_validate = mtk_dip_vb2_buf_out_validate, + .buf_cleanup = mtk_dip_vb2_queue_buf_cleanup, + .start_streaming = mtk_dip_vb2_start_streaming, + .stop_streaming = mtk_dip_vb2_stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +static const struct v4l2_file_operations mtk_dip_v4l2_fops = { + .unlocked_ioctl = video_ioctl2, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, +#ifdef CONFIG_COMPAT + .compat_ioctl32 = v4l2_compat_ioctl32, +#endif +}; + +int mtk_dip_dev_media_register(struct device *dev, + struct media_device *media_dev, + const char *model) +{ + int ret; + + media_dev->dev = dev; + strlcpy(media_dev->model, model, sizeof(media_dev->model)); + snprintf(media_dev->bus_info, sizeof(media_dev->bus_info), + "platform:%s", dev_name(dev)); + media_dev->hw_revision = 0; + media_dev->ops = &mtk_dip_media_req_ops; + media_device_init(media_dev); + + ret = media_device_register(media_dev); + if (ret) { + dev_err(dev, "failed to register media device (%d)\n", ret); + media_device_unregister(media_dev); + media_device_cleanup(media_dev); + } + + dev_dbg(dev, "Registered media device: %s, %p", media_dev->model, + media_dev); + + return ret; +} + +int mtk_dip_dev_v4l2_register(struct device *dev, + struct media_device *media_dev, + struct v4l2_device *v4l2_dev) +{ + int ret; + + v4l2_dev->mdev = media_dev; + v4l2_dev->ctrl_handler = NULL; + + ret = v4l2_device_register(dev, v4l2_dev); + if (ret) { + dev_err(dev, "failed to register V4L2 device (%d)\n", ret); + v4l2_device_unregister(v4l2_dev); + } + + dev_dbg(dev, "Registered v4l2 device: %p", v4l2_dev); + + return ret; +} + +static int mtk_dip_video_device_v4l2_register(struct mtk_dip_pipe *pipe, + struct mtk_dip_video_device *node) +{ + struct vb2_queue *vbq = &node->dev_q.vbq; + struct video_device *vdev = &node->vdev; + struct media_link *link; + int ret; + + /* Initialize miscellaneous variables */ + mutex_init(&node->dev_q.lock); + + /* Initialize formats to default values */ + vdev->device_caps = node->desc->cap; + vdev->ioctl_ops = node->desc->ops; + node->vdev_fmt.type = node->desc->buf_type; + mtk_dip_pipe_load_default_fmt(pipe, node, &node->vdev_fmt); + + /* Initialize media entities */ + ret = media_entity_pads_init(&vdev->entity, 1, &node->vdev_pad); + if (ret) { + dev_err(&pipe->dip_dev->pdev->dev, + "failed initialize media entity (%d)\n", ret); + goto err_mutex_destroy; + } + + node->vdev_pad.flags = V4L2_TYPE_IS_OUTPUT(node->desc->buf_type) ? + MEDIA_PAD_FL_SOURCE : MEDIA_PAD_FL_SINK; + + /* Initialize vbq */ + vbq->type = node->vdev_fmt.type; + vbq->io_modes = VB2_MMAP | VB2_DMABUF; + vbq->ops = &mtk_dip_vb2_ops; + vbq->mem_ops = &vb2_dma_contig_memops; + vbq->supports_requests = true; + vbq->buf_struct_size = sizeof(struct mtk_dip_dev_buffer); + vbq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + vbq->min_buffers_needed = 0; + vbq->drv_priv = pipe; + vbq->lock = &node->dev_q.lock; + + ret = vb2_queue_init(vbq); + if (ret) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s:%s:%s: failed to init vb2 queue(%d)\n", + __func__, pipe->desc->name, node->desc->name, + ret); + goto err_media_entity_cleanup; + } + + /* Initialize vdev */ + snprintf(vdev->name, sizeof(vdev->name), "%s %s", pipe->desc->name, + node->desc->name); + vdev->entity.name = vdev->name; + vdev->entity.function = MEDIA_ENT_F_IO_V4L; + vdev->entity.ops = NULL; + vdev->release = video_device_release_empty; + vdev->fops = &mtk_dip_v4l2_fops; + vdev->lock = &node->dev_q.lock; + vdev->ctrl_handler = &node->ctrl_handler; + vdev->v4l2_dev = &pipe->dip_dev->v4l2_dev; + vdev->queue = &node->dev_q.vbq; + vdev->vfl_dir = V4L2_TYPE_IS_OUTPUT(node->desc->buf_type) ? + VFL_DIR_TX : VFL_DIR_RX; + + if (node->desc->smem_alloc) { + vdev->queue->dev = &pipe->dip_dev->dip_hw.scp_pdev->dev; + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s: select smem_vb2_alloc_ctx(%p)\n", + pipe->desc->name, node->desc->name, + vdev->queue->dev); + } else { + vdev->queue->dev = &pipe->dip_dev->pdev->dev; + dev_dbg(&pipe->dip_dev->pdev->dev, + "%s:%s: select default_vb2_alloc_ctx(%p)\n", + pipe->desc->name, node->desc->name, + &pipe->dip_dev->pdev->dev); + } + + video_set_drvdata(vdev, pipe); + + ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); + if (ret) { + dev_err(&pipe->dip_dev->pdev->dev, + "failed to register video device (%d)\n", ret); + goto err_vb2_queue_release; + } + dev_dbg(&pipe->dip_dev->pdev->dev, "registered vdev: %s\n", + vdev->name); + + /* Create link between video node and the subdev pad */ + if (V4L2_TYPE_IS_OUTPUT(node->desc->buf_type)) + ret = media_create_pad_link(&vdev->entity, 0, + &pipe->subdev.entity, + node->desc->id, node->flags); + else + ret = media_create_pad_link(&pipe->subdev.entity, + node->desc->id, &vdev->entity, + 0, node->flags); + if (ret) + goto err_video_unregister_device; + + vdev->intf_devnode = media_devnode_create(&pipe->dip_dev->mdev, + MEDIA_INTF_T_V4L_VIDEO, 0, + VIDEO_MAJOR, vdev->minor); + if (!vdev->intf_devnode) { + ret = -ENOMEM; + goto err_rm_links; + } + + link = media_create_intf_link(&vdev->entity, + &vdev->intf_devnode->intf, + node->flags); + if (!link) { + ret = -ENOMEM; + goto err_rm_devnode; + } + + return 0; + +err_rm_devnode: + media_devnode_remove(vdev->intf_devnode); + +err_rm_links: + media_entity_remove_links(&vdev->entity); + +err_video_unregister_device: + video_unregister_device(vdev); + +err_vb2_queue_release: + vb2_queue_release(&node->dev_q.vbq); + +err_media_entity_cleanup: + media_entity_cleanup(&node->vdev.entity); + +err_mutex_destroy: + mutex_destroy(&node->dev_q.lock); + + return ret; +} + +static int mtk_dip_pipe_v4l2_ctrl_init(struct mtk_dip_pipe *dip_pipe) +{ + struct mtk_dip_video_device *node; + int i; + + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) + v4l2_ctrl_handler_init(&dip_pipe->nodes[i].ctrl_handler, + V4L2_CID_MTK_DIP_MAX); + + /* Only MDP 0 support rotate in MT8183 */ + node = &dip_pipe->nodes[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE]; + if (v4l2_ctrl_new_std(&node->ctrl_handler, + &mtk_dip_video_device_ctrl_ops, + V4L2_CID_ROTATE, 0, 270, 90, 0) == NULL) { + dev_err(&dip_pipe->dip_dev->pdev->dev, + "%s create rotate ctrl failed:(%d)", + node->desc->name, node->ctrl_handler.error); + + return -EPROBE_DEFER; + } + + return 0; +} + +static void mtk_dip_pipe_v4l2_ctrl_release(struct mtk_dip_pipe *dip_pipe) +{ + int i; + + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) + v4l2_ctrl_handler_free(&dip_pipe->nodes[i].ctrl_handler); +} + +int mtk_dip_pipe_v4l2_register(struct mtk_dip_pipe *pipe, + struct media_device *media_dev, + struct v4l2_device *v4l2_dev) +{ + int i, ret; + + ret = mtk_dip_pipe_v4l2_ctrl_init(pipe); + if (ret) { + dev_err(&pipe->dip_dev->pdev->dev, + "%s: failed(%d) to initialize ctrls\n", + pipe->desc->name, ret); + + return ret; + } + + pipe->streaming = 0; + + /* Initialize subdev media entity */ + pipe->subdev_pads = devm_kcalloc(&pipe->dip_dev->pdev->dev, + pipe->num_nodes, + sizeof(*pipe->subdev_pads), + GFP_KERNEL); + if (!pipe->subdev_pads) { + dev_err(&pipe->dip_dev->pdev->dev, + "failed to alloc pipe->subdev_pads (%d)\n", ret); + ret = -ENOMEM; + goto err_release_ctrl; + } + ret = media_entity_pads_init(&pipe->subdev.entity, + pipe->num_nodes, + pipe->subdev_pads); + if (ret) { + dev_err(&pipe->dip_dev->pdev->dev, + "failed initialize subdev media entity (%d)\n", ret); + goto err_free_subdev_pads; + } + + /* Initialize subdev */ + v4l2_subdev_init(&pipe->subdev, &mtk_dip_subdev_ops); + + pipe->subdev.entity.function = + MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER; + pipe->subdev.entity.ops = &mtk_dip_media_ops; + pipe->subdev.flags = + V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; + pipe->subdev.ctrl_handler = NULL; + pipe->subdev.internal_ops = &mtk_dip_subdev_internal_ops; + + for (i = 0; i < pipe->num_nodes; i++) + pipe->subdev_pads[i].flags = + V4L2_TYPE_IS_OUTPUT(pipe->nodes[i].desc->buf_type) ? + MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE; + + snprintf(pipe->subdev.name, sizeof(pipe->subdev.name), + "%s", pipe->desc->name); + v4l2_set_subdevdata(&pipe->subdev, pipe); + + ret = v4l2_device_register_subdev(&pipe->dip_dev->v4l2_dev, + &pipe->subdev); + if (ret) { + dev_err(&pipe->dip_dev->pdev->dev, + "failed initialize subdev (%d)\n", ret); + goto err_media_entity_cleanup; + } + + dev_dbg(&pipe->dip_dev->pdev->dev, + "register subdev: %s, ctrl_handler %p\n", + pipe->subdev.name, pipe->subdev.ctrl_handler); + + ret = v4l2_device_register_subdev_nodes(&pipe->dip_dev->v4l2_dev); + if (ret) { + dev_err(&pipe->dip_dev->pdev->dev, + "failed to register subdevs (%d)\n", ret); + goto err_unregister_subdev; + } + + /* Create video nodes and links */ + for (i = 0; i < pipe->num_nodes; i++) { + ret = mtk_dip_video_device_v4l2_register(pipe, + &pipe->nodes[i]); + if (ret) + goto err_unregister_subdev; + } + + return 0; + +err_unregister_subdev: + v4l2_device_unregister_subdev(&pipe->subdev); + +err_media_entity_cleanup: + media_entity_cleanup(&pipe->subdev.entity); + +err_free_subdev_pads: + devm_kfree(&pipe->dip_dev->pdev->dev, pipe->subdev_pads); + +err_release_ctrl: + mtk_dip_pipe_v4l2_ctrl_release(pipe); + + return ret; +} + +void mtk_dip_pipe_v4l2_unregister(struct mtk_dip_pipe *pipe) +{ + unsigned int i; + + for (i = 0; i < pipe->num_nodes; i++) { + video_unregister_device(&pipe->nodes[i].vdev); + vb2_queue_release(&pipe->nodes[i].dev_q.vbq); + media_entity_cleanup(&pipe->nodes[i].vdev.entity); + mutex_destroy(&pipe->nodes[i].dev_q.lock); + } + + v4l2_device_unregister_subdev(&pipe->subdev); + media_entity_cleanup(&pipe->subdev.entity); + v4l2_device_unregister(&pipe->dip_dev->v4l2_dev); + media_device_unregister(&pipe->dip_dev->mdev); + media_device_cleanup(&pipe->dip_dev->mdev); + mtk_dip_pipe_v4l2_ctrl_release(pipe); +} + +/******************************************** + * MTK DIP V4L2 Settings * + ********************************************/ + +static const struct v4l2_ioctl_ops mtk_dip_v4l2_video_out_ioctl_ops = { + .vidioc_querycap = mtk_dip_videoc_querycap, + + .vidioc_enum_framesizes = mtk_dip_videoc_enum_framesizes, + .vidioc_enum_fmt_vid_cap_mplane = mtk_dip_videoc_enum_fmt, + .vidioc_g_fmt_vid_cap_mplane = mtk_dip_videoc_g_fmt, + .vidioc_s_fmt_vid_cap_mplane = mtk_dip_videoc_s_fmt, + .vidioc_try_fmt_vid_cap_mplane = mtk_dip_videoc_try_fmt, + + .vidioc_enum_fmt_vid_out_mplane = mtk_dip_videoc_enum_fmt, + .vidioc_g_fmt_vid_out_mplane = mtk_dip_videoc_g_fmt, + .vidioc_s_fmt_vid_out_mplane = mtk_dip_videoc_s_fmt, + .vidioc_try_fmt_vid_out_mplane = mtk_dip_videoc_try_fmt, + + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + .vidioc_expbuf = vb2_ioctl_expbuf, + + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static const struct v4l2_ioctl_ops mtk_dip_v4l2_video_cap_ioctl_ops = { + .vidioc_querycap = mtk_dip_videoc_querycap, + + .vidioc_enum_framesizes = mtk_dip_videoc_enum_framesizes, + .vidioc_enum_fmt_vid_cap_mplane = mtk_dip_videoc_enum_fmt, + .vidioc_g_fmt_vid_cap_mplane = mtk_dip_videoc_g_fmt, + .vidioc_s_fmt_vid_cap_mplane = mtk_dip_videoc_s_fmt, + .vidioc_try_fmt_vid_cap_mplane = mtk_dip_videoc_try_fmt, + + .vidioc_enum_fmt_vid_out_mplane = mtk_dip_videoc_enum_fmt, + .vidioc_g_fmt_vid_out_mplane = mtk_dip_videoc_g_fmt, + .vidioc_s_fmt_vid_out_mplane = mtk_dip_videoc_s_fmt, + .vidioc_try_fmt_vid_out_mplane = mtk_dip_videoc_try_fmt, + + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + .vidioc_expbuf = vb2_ioctl_expbuf, + + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static const struct v4l2_ioctl_ops mtk_dip_v4l2_meta_out_ioctl_ops = { + .vidioc_querycap = mtk_dip_videoc_querycap, + + .vidioc_enum_fmt_meta_cap = mtk_dip_meta_enum_format, + .vidioc_g_fmt_meta_cap = mtk_dip_videoc_g_meta_fmt, + .vidioc_s_fmt_meta_cap = mtk_dip_videoc_g_meta_fmt, + .vidioc_try_fmt_meta_cap = mtk_dip_videoc_g_meta_fmt, + + .vidioc_enum_fmt_meta_out = mtk_dip_meta_enum_format, + .vidioc_g_fmt_meta_out = mtk_dip_videoc_g_meta_fmt, + .vidioc_s_fmt_meta_out = mtk_dip_videoc_g_meta_fmt, + .vidioc_try_fmt_meta_out = mtk_dip_videoc_g_meta_fmt, + + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + .vidioc_expbuf = vb2_ioctl_expbuf, +}; + +static const struct mtk_dip_dev_format fw_param_fmts[] = { + { + .format = V4L2_META_FMT_MTISP_PARAMS, + .buffer_size = 1024 * 128, + }, +}; + +static const struct mtk_dip_dev_format in_fmts[] = { + { + .format = V4L2_PIX_FMT_MTISP_B10, + .mdp_color = MDP_COLOR_BAYER10, + .colorspace = V4L2_COLORSPACE_SRGB, + .depth = { 10 }, + .row_depth = { 10 }, + .num_planes = 1, + }, + { + .format = V4L2_PIX_FMT_MTISP_F10, + .mdp_color = MDP_COLOR_FULLG10, + .colorspace = V4L2_COLORSPACE_RAW, + .depth = { 15 }, + .row_depth = { 15 }, + .num_planes = 1, + }, + { + .format = V4L2_PIX_FMT_VYUY, + .mdp_color = MDP_COLOR_VYUY, + .colorspace = V4L2_COLORSPACE_BT2020, + .depth = { 16 }, + .row_depth = { 16 }, + .num_planes = 1, + }, + { + .format = V4L2_PIX_FMT_YUYV, + .mdp_color = MDP_COLOR_YUYV, + .colorspace = V4L2_COLORSPACE_BT2020, + .depth = { 16 }, + .row_depth = { 16 }, + .num_planes = 1, + }, + { + .format = V4L2_PIX_FMT_YVYU, + .mdp_color = MDP_COLOR_YVYU, + .colorspace = V4L2_COLORSPACE_BT2020, + .depth = { 16 }, + .row_depth = { 16 }, + .num_planes = 1, + }, + { + .format = V4L2_PIX_FMT_NV12, + .mdp_color = MDP_COLOR_NV12, + .colorspace = V4L2_COLORSPACE_BT2020, + .depth = { 12 }, + .row_depth = { 8 }, + .num_planes = 1, + }, + { + .format = V4L2_PIX_FMT_YUV420M, + .mdp_color = MDP_COLOR_I420, + .colorspace = V4L2_COLORSPACE_BT2020, + .depth = { 8, 2, 2 }, + .row_depth = { 8, 4, 4 }, + .num_planes = 3, + }, + { + .format = V4L2_PIX_FMT_YVU420M, + .mdp_color = MDP_COLOR_YV12, + .colorspace = V4L2_COLORSPACE_BT2020, + .depth = { 8, 2, 2 }, + .row_depth = { 8, 4, 4 }, + .num_planes = 3, + }, + { + .format = V4L2_PIX_FMT_NV12M, + .mdp_color = MDP_COLOR_NV12, + .colorspace = V4L2_COLORSPACE_BT2020, + .depth = { 8, 4 }, + .row_depth = { 8, 8 }, + .num_planes = 2, + }, +}; + +static const struct mtk_dip_dev_format out_fmts[] = { + { + .format = V4L2_PIX_FMT_VYUY, + .mdp_color = MDP_COLOR_VYUY, + .colorspace = MDP_YCBCR_PROFILE_BT601, + .depth = { 16 }, + .row_depth = { 16 }, + .num_planes = 1, + }, + { + .format = V4L2_PIX_FMT_YUYV, + .mdp_color = MDP_COLOR_YUYV, + .colorspace = MDP_YCBCR_PROFILE_BT601, + .depth = { 16 }, + .row_depth = { 16 }, + .num_planes = 1, + }, + { + .format = V4L2_PIX_FMT_YVYU, + .mdp_color = MDP_COLOR_YVYU, + .colorspace = MDP_YCBCR_PROFILE_BT601, + .depth = { 16 }, + .row_depth = { 16 }, + .num_planes = 1, + }, + { + .format = V4L2_PIX_FMT_YVU420, + .mdp_color = MDP_COLOR_YV12, + .colorspace = MDP_YCBCR_PROFILE_BT601, + .depth = { 12 }, + .row_depth = { 8 }, + .num_planes = 1, + }, + { + .format = V4L2_PIX_FMT_NV12, + .mdp_color = MDP_COLOR_NV12, + .colorspace = MDP_YCBCR_PROFILE_BT601, + .depth = { 12 }, + .row_depth = { 8 }, + .num_planes = 1, + }, + { + .format = V4L2_PIX_FMT_YUV420M, + .mdp_color = MDP_COLOR_I420, + .colorspace = V4L2_COLORSPACE_BT2020, + .depth = { 8, 2, 2 }, + .row_depth = { 8, 4, 4 }, + .num_planes = 3, + }, + { + .format = V4L2_PIX_FMT_YVU420M, + .mdp_color = MDP_COLOR_YV12, + .colorspace = V4L2_COLORSPACE_BT2020, + .depth = { 8, 2, 2 }, + .row_depth = { 8, 4, 4 }, + .num_planes = 3, + }, + { + .format = V4L2_PIX_FMT_NV12M, + .mdp_color = MDP_COLOR_NV12, + .colorspace = V4L2_COLORSPACE_BT2020, + .depth = { 8, 4 }, + .row_depth = { 8, 8 }, + .num_planes = 2, + } +}; + +static const struct v4l2_frmsizeenum in_frmsizeenum = { + .type = V4L2_FRMSIZE_TYPE_CONTINUOUS, + .stepwise.max_width = MTK_DIP_CAPTURE_MAX_WIDTH, + .stepwise.min_width = MTK_DIP_CAPTURE_MIN_WIDTH, + .stepwise.max_height = MTK_DIP_CAPTURE_MAX_HEIGHT, + .stepwise.min_height = MTK_DIP_CAPTURE_MIN_HEIGHT, + .stepwise.step_height = 1, + .stepwise.step_width = 1, +}; + +static const struct v4l2_frmsizeenum out_frmsizeenum = { + .type = V4L2_FRMSIZE_TYPE_CONTINUOUS, + .stepwise.max_width = MTK_DIP_OUTPUT_MAX_WIDTH, + .stepwise.min_width = MTK_DIP_OUTPUT_MIN_WIDTH, + .stepwise.max_height = MTK_DIP_OUTPUT_MAX_HEIGHT, + .stepwise.min_height = MTK_DIP_OUTPUT_MIN_HEIGHT, + .stepwise.step_height = 1, + .stepwise.step_width = 1, +}; + +static const struct mtk_dip_video_device_desc +output_queues_setting[MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM] = { + { + .id = MTK_DIP_VIDEO_NODE_ID_RAW_OUT, + .name = "Raw Input", + .cap = V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING, + .buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE, + .smem_alloc = 0, + .flags = MEDIA_LNK_FL_ENABLED, + .fmts = in_fmts, + .num_fmts = ARRAY_SIZE(in_fmts), + .default_fmt_idx = 0, + .default_width = MTK_DIP_OUTPUT_MAX_WIDTH, + .default_height = MTK_DIP_OUTPUT_MAX_HEIGHT, + .dma_port = 0, + .frmsizeenum = &in_frmsizeenum, + .ops = &mtk_dip_v4l2_video_out_ioctl_ops, + .description = "Main image source", + }, + { + .id = MTK_DIP_VIDEO_NODE_ID_TUNING_OUT, + .name = "Tuning", + .cap = V4L2_CAP_META_OUTPUT | V4L2_CAP_STREAMING, + .buf_type = V4L2_BUF_TYPE_META_OUTPUT, + .smem_alloc = 1, + .flags = 0, + .fmts = fw_param_fmts, + .num_fmts = 1, + .default_fmt_idx = 0, + .dma_port = 0, + .frmsizeenum = &in_frmsizeenum, + .ops = &mtk_dip_v4l2_meta_out_ioctl_ops, + .description = "Tuning data", + }, +}; + +static const struct mtk_dip_video_device_desc +reprocess_output_queues_setting[MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM] = { + { + .id = MTK_DIP_VIDEO_NODE_ID_RAW_OUT, + .name = "Raw Input", + .cap = V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING, + .buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE, + .smem_alloc = 0, + .flags = MEDIA_LNK_FL_ENABLED, + .fmts = in_fmts, + .num_fmts = ARRAY_SIZE(in_fmts), + .default_fmt_idx = 5, + .default_width = MTK_DIP_OUTPUT_MAX_WIDTH, + .default_height = MTK_DIP_OUTPUT_MAX_HEIGHT, + .dma_port = 0, + .frmsizeenum = &in_frmsizeenum, + .ops = &mtk_dip_v4l2_video_out_ioctl_ops, + .description = "Source image to be process", + + }, + { + .id = MTK_DIP_VIDEO_NODE_ID_TUNING_OUT, + .name = "Tuning", + .cap = V4L2_CAP_META_OUTPUT | V4L2_CAP_STREAMING, + .buf_type = V4L2_BUF_TYPE_META_OUTPUT, + .smem_alloc = 1, + .flags = 0, + .fmts = fw_param_fmts, + .num_fmts = 1, + .default_fmt_idx = 0, + .dma_port = 0, + .frmsizeenum = &in_frmsizeenum, + .ops = &mtk_dip_v4l2_meta_out_ioctl_ops, + .description = "Tuning data for image enhancement", + }, +}; + +static const struct mtk_dip_video_device_desc +capture_queues_setting[MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM] = { + { + .id = MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE, + .name = "MDP0", + .cap = V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_STREAMING, + .buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, + .smem_alloc = 0, + .flags = MEDIA_LNK_FL_DYNAMIC | MEDIA_LNK_FL_ENABLED, + .fmts = out_fmts, + .num_fmts = ARRAY_SIZE(out_fmts), + .default_fmt_idx = 1, + .default_width = MTK_DIP_CAPTURE_MAX_WIDTH, + .default_height = MTK_DIP_CAPTURE_MAX_HEIGHT, + .dma_port = 0, + .frmsizeenum = &out_frmsizeenum, + .ops = &mtk_dip_v4l2_video_cap_ioctl_ops, + .description = "Output quality enhanced image", + }, + { + .id = MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE, + .name = "MDP1", + .cap = V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_STREAMING, + .buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, + .smem_alloc = 0, + .flags = MEDIA_LNK_FL_DYNAMIC | MEDIA_LNK_FL_ENABLED, + .fmts = out_fmts, + .num_fmts = ARRAY_SIZE(out_fmts), + .default_fmt_idx = 1, + .default_width = MTK_DIP_CAPTURE_MAX_WIDTH, + .default_height = MTK_DIP_CAPTURE_MAX_HEIGHT, + .dma_port = 0, + .frmsizeenum = &out_frmsizeenum, + .ops = &mtk_dip_v4l2_video_cap_ioctl_ops, + .description = "Output quality enhanced image", + + }, +}; + +static const struct mtk_dip_pipe_desc +pipe_settings[MTK_DIP_PIPE_ID_TOTAL_NUM] = { + { + .name = MTK_DIP_DEV_DIP_PREVIEW_NAME, + .id = MTK_DIP_PIPE_ID_PREVIEW, + .master = MTK_DIP_VIDEO_NODE_ID_NO_MASTER, + .output_queue_descs = output_queues_setting, + .total_output_queues = MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM, + .capture_queue_descs = capture_queues_setting, + .total_capture_queues = MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM, + }, + { + .name = MTK_DIP_DEV_DIP_CAPTURE_NAME, + .id = MTK_DIP_PIPE_ID_CAPTURE, + .master = MTK_DIP_VIDEO_NODE_ID_NO_MASTER, + .output_queue_descs = output_queues_setting, + .total_output_queues = MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM, + .capture_queue_descs = capture_queues_setting, + .total_capture_queues = MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM, + }, + { + .name = MTK_DIP_DEV_DIP_REPROCESS_NAME, + .id = MTK_DIP_PIPE_ID_REPROCESS, + .master = MTK_DIP_VIDEO_NODE_ID_NO_MASTER, + .output_queue_descs = reprocess_output_queues_setting, + .total_output_queues = MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM, + .capture_queue_descs = capture_queues_setting, + .total_capture_queues = MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM, + }, +}; + +static int mtk_dip_dev_v4l2_init(struct mtk_dip_dev *dip_dev) +{ + struct media_device *media_dev = &dip_dev->mdev; + struct v4l2_device *v4l2_dev = &dip_dev->v4l2_dev; + int i; + int ret; + + ret = mtk_dip_dev_media_register(&dip_dev->pdev->dev, + media_dev, + MTK_DIP_DEV_DIP_MEDIA_MODEL_NAME); + if (ret) { + dev_err(&dip_dev->pdev->dev, + "%s: media device register failed(%d)\n", + __func__, ret); + return ret; + } + + ret = mtk_dip_dev_v4l2_register(&dip_dev->pdev->dev, + media_dev, + v4l2_dev); + if (ret) { + dev_err(&dip_dev->pdev->dev, + "%s: v4l2 device register failed(%d)\n", + __func__, ret); + goto err_release_media_device; + } + + for (i = 0; i < MTK_DIP_PIPE_ID_TOTAL_NUM; i++) { + ret = mtk_dip_pipe_init(&dip_dev->dip_pipe[i], dip_dev, + &pipe_settings[i], media_dev, v4l2_dev); + if (ret) { + dev_err(&dip_dev->pdev->dev, + "%s: Pipe id(%d) init failed(%d)\n", + dip_dev->dip_pipe[i].desc->name, + i, ret); + goto err_release_pipe; + } + } + + return 0; + +err_release_pipe: + for (i = i - 1; i >= 0; i--) + mtk_dip_pipe_release(&dip_dev->dip_pipe[i]); + + v4l2_device_unregister(v4l2_dev); + +err_release_media_device: + media_device_unregister(media_dev); + media_device_cleanup(media_dev); + + return ret; +} + +void mtk_dip_dev_v4l2_release(struct mtk_dip_dev *dip_dev) +{ + int i; + + for (i = 0; i < MTK_DIP_PIPE_ID_TOTAL_NUM; i++) + mtk_dip_pipe_release(&dip_dev->dip_pipe[i]); + + v4l2_device_unregister(&dip_dev->v4l2_dev); + media_device_unregister(&dip_dev->mdev); + media_device_cleanup(&dip_dev->mdev); +} + +static int mtk_dip_probe(struct platform_device *pdev) +{ + struct mtk_dip_dev *dip_dev; + struct mtk_dip_hw *dip_hw; + struct device_node *node; + struct platform_device *larb_pdev; + phandle rproc_phandle; + int ret; + + dip_dev = devm_kzalloc(&pdev->dev, sizeof(*dip_dev), GFP_KERNEL); + if (!dip_dev) + return -ENOMEM; + + dip_dev->pdev = pdev; + dev_set_drvdata(&pdev->dev, dip_dev); + dip_hw = &dip_dev->dip_hw; + + node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0); + if (!node) { + dev_err(&pdev->dev, "No mediatek,larb found"); + return -EINVAL; + } + + larb_pdev = of_find_device_by_node(node); + if (!larb_pdev) { + dev_err(&pdev->dev, "No mediatek,larb device found"); + return -EINVAL; + } + + dip_hw->clks[0].id = "larb5"; + dip_hw->clks[1].id = "dip"; + + ret = devm_clk_bulk_get(&pdev->dev, MTK_DIP_CLK_NUM, + dip_hw->clks); + if (ret) { + dev_err(&pdev->dev, "Failed to get LARB5 and DIP clks:%d\n", + ret); + return ret; + } + + dip_hw->scp_pdev = scp_get_pdev(dip_dev->pdev); + if (!dip_hw->scp_pdev) { + dev_err(&dip_dev->pdev->dev, + "%s: failed to get scp device\n", + __func__); + return -EINVAL; + } + + if (of_property_read_u32(dip_dev->pdev->dev.of_node, + "mediatek,scp", + &rproc_phandle)) { + dev_err(&dip_dev->pdev->dev, + "%s: could not get scp device\n", + __func__); + return -EINVAL; + } + + dip_hw->rproc_handle = rproc_get_by_phandle(rproc_phandle); + if (!dip_hw->rproc_handle) { + dev_err(&dip_dev->pdev->dev, + "%s: could not get DIP's rproc_handle\n", + __func__); + return -EINVAL; + } + + atomic_set(&dip_hw->dip_stream_cnt, 0); + atomic_set(&dip_hw->dip_enque_cnt, 0); + atomic_set(&dip_hw->num_composing, 0); + atomic_set(&dip_hw->num_running, 0); + mutex_init(&dip_hw->hw_op_lock); + /* Limited by the co-processor side's stack size */ + sema_init(&dip_hw->sem, DIP_COMPOSING_MAX_NUM); + + ret = mtk_dip_hw_working_buf_pool_init(dip_hw); + if (ret) { + dev_err(&pdev->dev, "working buffer init failed(%d)\n", ret); + return ret; + } + + ret = mtk_dip_dev_v4l2_init(dip_dev); + if (ret) + dev_err(&pdev->dev, "v4l2 init failed(%d)\n", ret); + + pm_runtime_enable(&pdev->dev); + + return ret; +} + +static int mtk_dip_remove(struct platform_device *pdev) +{ + struct mtk_dip_dev *dip_dev = dev_get_drvdata(&pdev->dev); + + mtk_dip_hw_working_buf_pool_release(&dip_dev->dip_hw); + mtk_dip_dev_v4l2_release(dip_dev); + pm_runtime_disable(&pdev->dev); + mutex_destroy(&dip_dev->dip_hw.hw_op_lock); + + return 0; +} + +static int __maybe_unused mtk_dip_pm_suspend(struct device *dev) +{ + struct mtk_dip_dev *dip_dev = dev_get_drvdata(dev); + + clk_bulk_disable_unprepare(MTK_DIP_CLK_NUM, dip_dev->dip_hw.clks); + dev_dbg(dev, "%s: disabled dip clks\n", __func__); + + return 0; +} + +static int __maybe_unused mtk_dip_pm_resume(struct device *dev) +{ + struct mtk_dip_dev *dip_dev = dev_get_drvdata(dev); + int ret = clk_bulk_prepare_enable(MTK_DIP_CLK_NUM, + dip_dev->dip_hw.clks); + if (ret) { + dev_err(dev, "%s: failed to enable dip clks(%d)\n", + __func__, ret); + return ret; + } + dev_dbg(dev, "%s: enabled dip clks\n", __func__); + + ret = rproc_boot(dip_dev->dip_hw.rproc_handle); + if (ret) + dev_err(dev, "%s: FW load failed(rproc:%p):%d\n", + __func__, dip_dev->dip_hw.rproc_handle, ret); + else + dev_dbg(dev, "%s: FW loaded(rproc:%p)\n", + __func__, dip_dev->dip_hw.rproc_handle); + + return ret; +} + +static int mtk_dip_get_scp_job_num(struct mtk_dip_dev *dip_dev) +{ + int num; + + mutex_lock(&dip_dev->dip_hw.hw_op_lock); + num = atomic_read(&dip_dev->dip_hw.num_composing); + mutex_unlock(&dip_dev->dip_hw.hw_op_lock); + + return num; +} + +static int __maybe_unused mtk_dip_suspend(struct device *dev) +{ + struct mtk_dip_dev *dip_dev = dev_get_drvdata(dev); + int ret, num; + + if (pm_runtime_suspended(dev)) { + dev_dbg(dev, "%s: pm_runtime_suspended is true, no action\n", + __func__); + return 0; + } + + ret = wait_event_timeout(dip_dev->dip_hw.flushing_hw_wq, + !(num = mtk_dip_get_scp_job_num(dip_dev)), + msecs_to_jiffies(200)); + if (!ret && num) { + dev_err(dev, "%s: flushing SCP job timeout, num(%d)\n", + __func__, num); + + return -EBUSY; + } + + return mtk_dip_pm_suspend(dev); +} + +static int __maybe_unused mtk_dip_resume(struct device *dev) +{ + if (pm_runtime_suspended(dev)) { + dev_dbg(dev, "%s: pm_runtime_suspended is true, no action\n", + __func__); + return 0; + } + + return mtk_dip_pm_resume(dev); +} + +static const struct dev_pm_ops mtk_dip_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(mtk_dip_suspend, mtk_dip_resume) + SET_RUNTIME_PM_OPS(mtk_dip_suspend, mtk_dip_resume, NULL) +}; + +static const struct of_device_id mtk_dip_of_match[] = { + { .compatible = "mediatek,mt8183-dip", }, + {} +}; +MODULE_DEVICE_TABLE(of, mtk_dip_of_match); + +static struct platform_driver mtk_dip_driver = { + .probe = mtk_dip_probe, + .remove = mtk_dip_remove, + .driver = { + .name = "camera-dip", + .pm = &mtk_dip_pm_ops, + .of_match_table = of_match_ptr(mtk_dip_of_match), + } +}; + +module_platform_driver(mtk_dip_driver); + +MODULE_AUTHOR("Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Mediatek DIP driver"); + -- 2.18.0 ^ permalink raw reply related [flat|nested] 12+ messages in thread
[parent not found: <20190708110500.7242-5-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>]
* Re: [RFC PATCH V2 4/6] platform: mtk-isp: Add Mediatek DIP driver [not found] ` <20190708110500.7242-5-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> @ 2019-07-31 7:10 ` Tomasz Figa [not found] ` <20190731071014.GA43159-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org> 0 siblings, 1 reply; 12+ messages in thread From: Tomasz Figa @ 2019-07-31 7:10 UTC (permalink / raw) To: frederic.chen-NuS5LvNUpcJWk0Htik3J/w Cc: shik-F7+t8E8rja9g9hUCZPvPmw, devicetree-u79uwXL29TY76Z2rM5mHXA, Sean.Cheng-NuS5LvNUpcJWk0Htik3J/w, laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw, Rynn.Wu-NuS5LvNUpcJWk0Htik3J/w, christie.yu-NuS5LvNUpcJWk0Htik3J/w, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, Allan.Yang-NuS5LvNUpcJWk0Htik3J/w, holmes.chiou-NuS5LvNUpcJWk0Htik3J/w, suleiman-F7+t8E8rja9g9hUCZPvPmw, Jerry-ch.Chen-NuS5LvNUpcJWk0Htik3J/w, jungo.lin-NuS5LvNUpcJWk0Htik3J/w, sj.huang-NuS5LvNUpcJWk0Htik3J/w, yuzhao-F7+t8E8rja9g9hUCZPvPmw, hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w, zwisler-F7+t8E8rja9g9hUCZPvPmw, matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, mchehab-DgEjT+Ai2ygdnm+yROfE0A, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-media-u79uwXL29TY76Z2rM5mHXA Hi Frederic, On Mon, Jul 08, 2019 at 07:04:58PM +0800, frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote: > From: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > This patch adds the driver of Digital Image Processing (DIP) > unit in Mediatek ISP system, providing image format > conversion, resizing, and rotation features. > > The mtk-isp directory will contain drivers for multiple IP > blocks found in Mediatek ISP system. It will include ISP > Pass 1 driver(CAM), sensor interface driver, DIP driver and > face detection driver. > > Signed-off-by: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > --- > drivers/media/platform/mtk-isp/Makefile | 7 + > .../media/platform/mtk-isp/isp_50/Makefile | 7 + > .../platform/mtk-isp/isp_50/dip/Makefile | 18 + > .../platform/mtk-isp/isp_50/dip/mtk_dip-dev.c | 769 +++++++ > .../platform/mtk-isp/isp_50/dip/mtk_dip-dev.h | 337 ++++ > .../platform/mtk-isp/isp_50/dip/mtk_dip-hw.h | 155 ++ > .../platform/mtk-isp/isp_50/dip/mtk_dip-sys.c | 794 ++++++++ > .../mtk-isp/isp_50/dip/mtk_dip-v4l2.c | 1786 +++++++++++++++++ > 8 files changed, 3873 insertions(+) > create mode 100644 drivers/media/platform/mtk-isp/Makefile > create mode 100644 drivers/media/platform/mtk-isp/isp_50/Makefile > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/Makefile > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c > Thanks for v2! The code is getting better, but there are still problems. Please check my comments inline. Note that it would be really good if you could collaborate more closely with Jungo working on the P1 driver, as I noticed similar problems in both drivers, with some being addressed only in one of the drivers, but not the other. > diff --git a/drivers/media/platform/mtk-isp/Makefile b/drivers/media/platform/mtk-isp/Makefile > new file mode 100644 > index 000000000000..b08d3bdf2800 > --- /dev/null > +++ b/drivers/media/platform/mtk-isp/Makefile > @@ -0,0 +1,7 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# > +# Copyright (C) 2019 MediaTek Inc. > +# > + > +obj-y += isp_50/ > + > diff --git a/drivers/media/platform/mtk-isp/isp_50/Makefile b/drivers/media/platform/mtk-isp/isp_50/Makefile > new file mode 100644 > index 000000000000..564c3889c34c > --- /dev/null > +++ b/drivers/media/platform/mtk-isp/isp_50/Makefile > @@ -0,0 +1,7 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# > +# Copyright (C) 2019 MediaTek Inc. > +# > + > +obj-$(CONFIG_VIDEO_MEDIATEK_ISP_DIP) += dip/ > + > diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/Makefile b/drivers/media/platform/mtk-isp/isp_50/dip/Makefile > new file mode 100644 > index 000000000000..99e760d7d5a9 > --- /dev/null > +++ b/drivers/media/platform/mtk-isp/isp_50/dip/Makefile > @@ -0,0 +1,18 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# > +# Copyright (C) 2019 MediaTek Inc. > +# > + > +$(info $(srctree)) > +ccflags-y += -I$(srctree)/drivers/media/platform/mtk-mdp3 > + > +obj-$(CONFIG_VIDEO_MEDIATEK_ISP_DIP) += mtk_dip-v4l2.o > + > +# Utilities to provide frame-based streaming model > +# with v4l2 user interfaces and alloc context managing > +# memory shared between ISP and coprocessor > +mtk_dip_util-objs := \ > +mtk_dip-dev.o \ > +mtk_dip-sys.o > + > +obj-$(CONFIG_VIDEO_MEDIATEK_ISP_DIP) += mtk_dip_util.o > diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c > new file mode 100644 > index 000000000000..63256fa27428 > --- /dev/null > +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c > @@ -0,0 +1,769 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2018 MediaTek Inc. > + * > + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > + * > + */ > + > +#include <linux/dma-mapping.h> > +#include <linux/platform_device.h> > +#include <media/videobuf2-dma-contig.h> > +#include <media/v4l2-event.h> > +#include "mtk_dip-dev.h" > +#include "mtk-mdp3-regs.h" > +#include "mtk-img-ipi.h" > + > +int mtk_dip_pipe_init(struct mtk_dip_pipe *pipe, > + struct mtk_dip_dev *dip_dev, > + const struct mtk_dip_pipe_desc *setting, > + struct media_device *media_dev, > + struct v4l2_device *v4l2_dev) > +{ > + int ret, i, count = 0; > + > + pipe->dip_dev = dip_dev; > + pipe->desc = setting; > + pipe->num_nodes = MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; Rather than hardcoding the number, could we just pass ARRAY_SIZE(desc) to this function from the caller? > + > + atomic_set(&pipe->pipe_job_sequence, 0); > + INIT_LIST_HEAD(&pipe->pipe_job_running_list); > + INIT_LIST_HEAD(&pipe->pipe_job_pending_list); > + spin_lock_init(&pipe->job_lock); > + mutex_init(&pipe->lock); > + > + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) { i < pipe->num_nodes > + if (i < MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM) { > + pipe->nodes[i].desc = > + &pipe->desc->output_queue_descs[i]; > + } else { > + int cap_idx = i - MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM; > + > + pipe->nodes[i].desc = > + &pipe->desc->capture_queue_descs[cap_idx]; > + } We shouldn't need this if/else block if we put all the descriptors in one array. > + > + pipe->nodes[i].flags = > + pipe->nodes[i].desc->flags; No need to wrap the line here. > + atomic_set(&pipe->nodes[i].sequence, 0); I don't see this sequence used anywhere else in the driver. > + spin_lock_init(&pipe->nodes[i].buf_list_lock); > + INIT_LIST_HEAD(&pipe->nodes[i].buf_list); > + > + if (pipe->nodes[i].flags & MEDIA_LNK_FL_ENABLED) > + count++; > + } > + > + if (pipe->desc->master >= 0 && > + pipe->desc->master < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM) { > + if (!(pipe->nodes[pipe->desc->master].flags & > + MEDIA_LNK_FL_ENABLED)) > + count++; > + > + pipe->nodes[pipe->desc->master].flags |= > + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE; > + } All the pipes seem to have master set to MTK_DIP_VIDEO_NODE_ID_NO_MASTER, so this seems to be dead code. > + > + atomic_set(&pipe->cnt_nodes_not_streaming, count); > + > + ret = mtk_dip_pipe_v4l2_register(pipe, media_dev, v4l2_dev); > + if (ret) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s: failed(%d) to create V4L2 devices\n", > + pipe->desc->name, ret); > + > + goto err_destroy_pipe_lock; > + } > + > + return 0; > + > +err_destroy_pipe_lock: > + mutex_destroy(&pipe->lock); > + > + return ret; > +} > + > +int mtk_dip_pipe_release(struct mtk_dip_pipe *pipe) > +{ > + mtk_dip_pipe_v4l2_unregister(pipe); > + mutex_destroy(&pipe->lock); > + > + return 0; > +} > + > +int mtk_dip_pipe_next_job_id(struct mtk_dip_pipe *pipe) > +{ > + int global_job_id = atomic_inc_return(&pipe->pipe_job_sequence); > + > + return (global_job_id & 0x0000FFFF) | (pipe->desc->id << 16); > +} > + > +struct mtk_dip_pipe_job_info* > +mtk_dip_pipe_get_running_job_info(struct mtk_dip_pipe *pipe, int pipe_job_id) > +{ > + struct mtk_dip_pipe_job_info *job_info; > + > + spin_lock(&pipe->job_lock); > + list_for_each_entry(job_info, > + &pipe->pipe_job_running_list, list) { > + if (job_info->id == pipe_job_id) { > + spin_unlock(&pipe->job_lock); > + return job_info; > + } > + } > + spin_unlock(&pipe->job_lock); > + > + return NULL; > +} > + > +void mtk_dip_pipe_debug_job(struct mtk_dip_pipe *pipe, > + struct mtk_dip_pipe_job_info *job_info) > +{ > + int i; > + > + dev_dbg(&pipe->dip_dev->pdev->dev, "%s: pipe-job(%p),id(%d)\n", > + pipe->desc->name, job_info, job_info->id); > + > + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM ; i++) { > + if (job_info->buf_map[i]) > + dev_dbg(&pipe->dip_dev->pdev->dev, "%s:%s:buf(%p)\n", > + pipe->desc->name, pipe->nodes[i].desc->name, i, > + job_info->buf_map[i]); > + } > +} We should remove this kind of excessive debugging code. I'd recommend keeping it as a local test-only patch on top of the driver. > + > +int mtk_dip_pipe_job_finish(struct mtk_dip_pipe *pipe, > + unsigned int pipe_job_info_id, > + enum vb2_buffer_state vbf_state) This function only returns 0. Should it be made void? > +{ > + struct mtk_dip_pipe_job_info *job_info; > + struct mtk_dip_dev_buffer *in_buf; > + int i, num_running_jobs; > + > + job_info = mtk_dip_pipe_get_running_job_info(pipe, pipe_job_info_id); Why don't we just pass mtk_dip_request as an argument ot this function? I can see that the both callers already have them. > + in_buf = job_info->buf_map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT]; > + > + spin_lock(&pipe->job_lock); > + list_del(&job_info->list); > + num_running_jobs = --pipe->num_jobs; > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s: num of running jobs(%d)\n", > + __func__, pipe->desc->name, pipe->num_jobs); > + spin_unlock(&pipe->job_lock); > + > + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) { > + struct mtk_dip_dev_buffer *dev_buf = job_info->buf_map[i]; > + struct mtk_dip_video_device *node; > + > + if (!dev_buf) > + continue; > + > + if (in_buf && dev_buf != in_buf) Is it possible that in_buf is NULL? > + dev_buf->vbb.vb2_buf.timestamp = > + in_buf->vbb.vb2_buf.timestamp; > + > + vb2_buffer_done(&dev_buf->vbb.vb2_buf, vbf_state); > + > + node = mtk_dip_vbq_to_node(dev_buf->vbb.vb2_buf.vb2_queue); > + spin_lock(&node->buf_list_lock); > + list_del(&dev_buf->list); > + spin_unlock(&node->buf_list_lock); > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s: return buf, idx(%d), state(%d)\n", > + pipe->desc->name, node->desc->name, > + dev_buf->vbb.vb2_buf.index, vbf_state); > + } This looks almost the same as what's being done inside mtk_dip_hw_streamoff(). Could we just call this function from the loop there? > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s: finished job id(%d), vbf_state(%d), running jobs(%d)\n", > + __func__, pipe->desc->name, pipe_job_info_id, vbf_state, > + num_running_jobs); > + > + return 0; > +} > + > +static __u32 get_pixel_byte_by_fmt(__u32 pix_fmt) > +{ > + switch (pix_fmt) { > + case V4L2_PIX_FMT_MTISP_B8: > + case V4L2_PIX_FMT_MTISP_F8: > + return 8; > + case V4L2_PIX_FMT_MTISP_B10: > + case V4L2_PIX_FMT_MTISP_F10: > + return 10; > + case V4L2_PIX_FMT_MTISP_B12: > + case V4L2_PIX_FMT_MTISP_F12: > + return 12; > + case V4L2_PIX_FMT_MTISP_B14: > + case V4L2_PIX_FMT_MTISP_F14: > + return 14; > + case V4L2_PIX_FMT_MTISP_U8: > + case V4L2_PIX_FMT_MTISP_U10: > + case V4L2_PIX_FMT_MTISP_U12: > + case V4L2_PIX_FMT_MTISP_U14: >From all the formats above, we only have B10 and F10 in in_fmts[]. Are they all supported by DIP? If so, are they only missing in in_fmts[] or the driver needs more changes to support them? > + return 16; > + default: > + return 0; > + } > +} > + > +static __u32 > +mtk_dip_pass1_cal_main_stride(__u32 width, __u32 pix_fmt) > +{ > + __u32 stride; > + __u32 pixel_byte = get_pixel_byte_by_fmt(pix_fmt); > + > + width = ALIGN(width, 4); > + stride = ALIGN(DIV_ROUND_UP(width * pixel_byte, 8), 2); > + > + return ALIGN(stride, 4); > +} > + > +static __u32 > +mtk_dip_pass1_cal_pack_stride(__u32 width, __u32 pix_fmt) > +{ > + __u32 stride; > + __u32 pixel_byte = get_pixel_byte_by_fmt(pix_fmt); The __ types are only for UAPI structures. Please use the types without the prefix. > + > + width = ALIGN(width, 4); > + stride = DIV_ROUND_UP(width * 3, 2); > + stride = DIV_ROUND_UP(stride * pixel_byte, 8); > + > + if (pix_fmt == V4L2_PIX_FMT_MTISP_F10) > + stride = ALIGN(stride, 4); > + else > + stride = ALIGN(stride, 8); Could you explain all the calculations done above? > + > + return stride; > +} > + > +static int is_stride_need_to_align(u32 format, u32 *need_aligned_fmts, > + int length) > +{ > + int i; > + > + for (i = 0; i < length; i++) { > + if (format == need_aligned_fmts[i]) > + return true; > + } > + > + return false; > +} > + > +/* Stride that is accepted by MDP HW */ > +static u32 dip_mdp_fmt_get_stride(struct v4l2_pix_format_mplane *mfmt, > + const struct mtk_dip_dev_format *fmt, > + unsigned int plane) > +{ > + enum mdp_color c = fmt->mdp_color; > + u32 bytesperline = (mfmt->width * fmt->row_depth[plane]) / 8; > + u32 stride = (bytesperline * MDP_COLOR_BITS_PER_PIXEL(c)) > + / fmt->row_depth[0]; > + > + if (plane == 0) > + return stride; > + > + if (plane < MDP_COLOR_GET_PLANE_COUNT(c)) { > + if (MDP_COLOR_IS_BLOCK_MODE(c)) > + stride = stride / 2; > + return stride; > + } > + > + return 0; > +} > + > +/* Stride that is accepted by MDP HW of format with contiguous planes */ > +static u32 > +dip_mdp_fmt_get_stride_contig(const struct mtk_dip_dev_format *fmt, > + u32 pix_stride, > + unsigned int plane) > +{ > + enum mdp_color c = fmt->mdp_color; > + u32 stride = pix_stride; > + > + if (plane == 0) > + return stride; > + > + if (plane < MDP_COLOR_GET_PLANE_COUNT(c)) { > + stride = stride >> MDP_COLOR_GET_H_SUBSAMPLE(c); > + if (MDP_COLOR_IS_UV_COPLANE(c) && !MDP_COLOR_IS_BLOCK_MODE(c)) > + stride = stride * 2; > + return stride; > + } > + > + return 0; > +} > + > +/* Plane size that is accepted by MDP HW */ > +static u32 > +dip_mdp_fmt_get_plane_size(const struct mtk_dip_dev_format *fmt, > + u32 stride, u32 height, > + unsigned int plane) > +{ > + enum mdp_color c = fmt->mdp_color; > + u32 bytesperline; > + > + bytesperline = (stride * fmt->row_depth[0]) > + / MDP_COLOR_BITS_PER_PIXEL(c); Hmm, stride and bytesperline should be exactly the same thing. Could you explain what's happening here? > + if (plane == 0) > + return bytesperline * height; > + if (plane < MDP_COLOR_GET_PLANE_COUNT(c)) { > + height = height >> MDP_COLOR_GET_V_SUBSAMPLE(c); > + if (MDP_COLOR_IS_BLOCK_MODE(c)) > + bytesperline = bytesperline * 2; > + return bytesperline * height; > + } > + > + return 0; > +} > + > +static int mtk_dip_pipe_get_stride(struct mtk_dip_pipe *pipe, > + struct v4l2_pix_format_mplane *mfmt, > + const struct mtk_dip_dev_format *dfmt, > + int plane, > + char *buf_name) > +{ > + int bpl; > + u32 fmts_pass1_main[] = { > + V4L2_PIX_FMT_MTISP_B8, > + V4L2_PIX_FMT_MTISP_B10 > + }; > + u32 fmts_pass1_pack[] = { > + V4L2_PIX_FMT_MTISP_F8, > + V4L2_PIX_FMT_MTISP_F10 > + }; We don't seem to have B8 and F8 formats in in_fmts[]. Are they just missing there or there is something else missing too? > + > + if (is_stride_need_to_align(mfmt->pixelformat, fmts_pass1_main, > + ARRAY_SIZE(fmts_pass1_main))) > + bpl = mtk_dip_pass1_cal_main_stride(mfmt->width, > + mfmt->pixelformat); > + else if (is_stride_need_to_align(mfmt->pixelformat, fmts_pass1_pack, > + ARRAY_SIZE(fmts_pass1_pack))) > + bpl = mtk_dip_pass1_cal_pack_stride(mfmt->width, > + mfmt->pixelformat); > + else > + bpl = dip_mdp_fmt_get_stride(mfmt, dfmt, plane); Please add the information about necessary alignment to struct mtk_dip_dev_format instead of hardcoding in the local arrays above. > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s:%s: plane(%d), pixelformat(%x) width(%d), stride(%d)", > + __func__, pipe->desc->name, buf_name, plane, > + mfmt->pixelformat, mfmt->width, bpl); > + > + return bpl; > +} > + > +void mtk_dip_pipe_set_img_fmt(struct mtk_dip_pipe *pipe, The function name is confusing. "Set" in V4L2 sounds like changing the active format. How about mtk_dip_pipe_try_fmt()? > + struct mtk_dip_video_device *node, > + struct v4l2_pix_format_mplane *mfmt_to_fill, This is quite a long name. It should be evident that this argument is an output, so "fmt" should be good enough. > + const struct mtk_dip_dev_format *dev_fmt) > +{ > + int i; > + > + mfmt_to_fill->pixelformat = dev_fmt->format; > + mfmt_to_fill->num_planes = dev_fmt->num_planes; > + mfmt_to_fill->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; > + mfmt_to_fill->quantization = V4L2_QUANTIZATION_DEFAULT; > + mfmt_to_fill->colorspace = dev_fmt->colorspace; > + mfmt_to_fill->field = V4L2_FIELD_NONE; > + > + memset(mfmt_to_fill->reserved, 0, sizeof(mfmt_to_fill->reserved)); The core already takes care of zeroing the reserved fields. > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s:%s: Fmt(%c%c%c%c), w(%d),h(%d), f(%d)\n", > + __func__, pipe->desc->name, node->desc->name, > + mfmt_to_fill->pixelformat & 0xff, > + mfmt_to_fill->pixelformat >> 8 & 0xff, > + mfmt_to_fill->pixelformat >> 16 & 0xff, > + mfmt_to_fill->pixelformat >> 24 & 0xff, > + mfmt_to_fill->width, mfmt_to_fill->height, > + mfmt_to_fill->field); No need for this print. There is already built in printing of formats in the core when format-related ioctls are called. > + > + for (i = 0; i < mfmt_to_fill->num_planes; ++i) { > + u32 min_bpl = (mfmt_to_fill->width * dev_fmt->row_depth[i]) / 8; Shouldn't this use DIV_ROUND_UP()? I can see some row_depth not being a multiple of 8. > + u32 bpl = mfmt_to_fill->plane_fmt[i].bytesperline; In current V4L2 API, bytesperline is always set by the driver, so no need to preserve what came from the userspace. > + u32 sizeimage; > + > + if (bpl < min_bpl) > + bpl = min_bpl; > + > + sizeimage = (bpl * mfmt_to_fill->height * dev_fmt->depth[i]) > + / dev_fmt->row_depth[i]; Shouldn't this be bpl * fmt->height? > + mfmt_to_fill->plane_fmt[i].bytesperline = bpl; > + if (mfmt_to_fill->plane_fmt[i].sizeimage < sizeimage) > + mfmt_to_fill->plane_fmt[i].sizeimage = sizeimage; Same with sizeimage. It's defined to be always written by the driver. > + > + memset(mfmt_to_fill->plane_fmt[i].reserved, > + 0, sizeof(mfmt_to_fill->plane_fmt[i].reserved)); The core takes care of this already. > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s:%s: plane(%d): bpl(%u), min_bpl(%u), s(%u)\n", > + __func__, pipe->desc->name, node->desc->name, > + i, bpl, min_bpl, mfmt_to_fill->plane_fmt[i].sizeimage); The core already has an appropriate debug message. > + } > +} > + > +static void set_meta_fmt(struct mtk_dip_pipe *pipe, > + struct v4l2_meta_format *metafmt_to_fill, > + const struct mtk_dip_dev_format *dev_fmt) > +{ > + metafmt_to_fill->dataformat = dev_fmt->format; > + > + if (dev_fmt->buffer_size <= 0) { > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s: Invalid meta buf size(%u), use default(%u)\n", > + pipe->desc->name, dev_fmt->buffer_size, > + MTK_DIP_DEV_META_BUF_DEFAULT_SIZE); > + > + metafmt_to_fill->buffersize = > + MTK_DIP_DEV_META_BUF_DEFAULT_SIZE; > + } else { > + metafmt_to_fill->buffersize = dev_fmt->buffer_size; > + } > +} > + > +void mtk_dip_pipe_load_default_fmt(struct mtk_dip_pipe *pipe, > + struct mtk_dip_video_device *node, > + struct v4l2_format *fmt_to_fill) > +{ > + int idx = node->desc->default_fmt_idx; > + > + if (node->desc->num_fmts == 0) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s:%s: desc->num_fmts is 0, no format support list\n", > + __func__, node->desc->name); > + > + return; > + } Is this even possible? > + > + if (idx >= node->desc->num_fmts) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s:%s: invalid idx(%d), must < num_fmts(%d)\n", > + __func__, node->desc->name, idx, node->desc->num_fmts); > + > + idx = 0; > + } Is this possible too? > + > + fmt_to_fill->type = node->desc->buf_type; > + if (mtk_dip_buf_is_meta(node->desc->buf_type)) { > + set_meta_fmt(pipe, &fmt_to_fill->fmt.meta, > + &node->desc->fmts[idx]); > + } else { > + fmt_to_fill->fmt.pix_mp.width = node->desc->default_width; > + fmt_to_fill->fmt.pix_mp.height = node->desc->default_height; > + mtk_dip_pipe_set_img_fmt(pipe, node, &fmt_to_fill->fmt.pix_mp, > + &node->desc->fmts[idx]); > + } > +} > + > +const struct mtk_dip_dev_format* > +mtk_dip_pipe_find_fmt(struct mtk_dip_pipe *pipe, > + struct mtk_dip_video_device *node, > + u32 format) > +{ > + int i; > + > + for (i = 0; i < node->desc->num_fmts; i++) { > + if (node->desc->fmts[i].format == format) > + return &node->desc->fmts[i]; > + } > + > + return NULL; > +} > + > +static enum mdp_ycbcr_profile > +map_ycbcr_prof_mplane(struct v4l2_pix_format_mplane *pix_mp, u32 mdp_color) > +{ > + if (MDP_COLOR_IS_RGB(mdp_color)) > + return MDP_YCBCR_PROFILE_FULL_BT601; Similar comment as below. > + > + switch (pix_mp->colorspace) { > + case V4L2_COLORSPACE_JPEG: > + return MDP_YCBCR_PROFILE_JPEG; > + case V4L2_COLORSPACE_REC709: > + case V4L2_COLORSPACE_DCI_P3: > + if (pix_mp->quantization == V4L2_QUANTIZATION_FULL_RANGE) > + return MDP_YCBCR_PROFILE_FULL_BT709; > + return MDP_YCBCR_PROFILE_BT709; > + case V4L2_COLORSPACE_BT2020: > + if (pix_mp->quantization == V4L2_QUANTIZATION_FULL_RANGE) > + return MDP_YCBCR_PROFILE_FULL_BT2020; > + return MDP_YCBCR_PROFILE_BT2020; > + } > + /* V4L2_COLORSPACE_SRGB or else */ > + if (pix_mp->quantization == V4L2_QUANTIZATION_FULL_RANGE) > + return MDP_YCBCR_PROFILE_FULL_BT601; > + > + return MDP_YCBCR_PROFILE_BT601; > +} > + > +static inline int is_contig_mp_buffer(struct mtk_dip_dev_buffer *dev_buf) > +{ > + return !(MDP_COLOR_GET_PLANE_COUNT(dev_buf->dev_fmt->mdp_color) == 1); > +} > + > +static int fill_ipi_img_param_mp(struct mtk_dip_pipe *pipe, > + struct img_image_buffer *b, > + struct mtk_dip_dev_buffer *dev_buf, > + char *buf_name) Please prefix the functions with mtk_dip_. > +{ > + struct v4l2_pix_format_mplane *pix_mp; > + const struct mtk_dip_dev_format *mdp_fmt; > + unsigned int i; > + unsigned int total_plane_size = 0; > + > + if (!dev_buf->dev_fmt) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s: %s's dev format not set\n", > + __func__, buf_name); > + return -EINVAL; > + } Is this even possible? > + > + pix_mp = &dev_buf->fmt.fmt.pix_mp; > + mdp_fmt = dev_buf->dev_fmt; > + > + b->usage = dev_buf->dma_port; > + b->format.colorformat = dev_buf->dev_fmt->mdp_color; > + b->format.width = dev_buf->fmt.fmt.pix_mp.width; > + b->format.height = dev_buf->fmt.fmt.pix_mp.height; > + b->format.ycbcr_prof = > + map_ycbcr_prof_mplane(pix_mp, > + dev_buf->dev_fmt->mdp_color); > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s: buf(%s), IPI: w(%d),h(%d),c(0x%x)\n", > + pipe->desc->name, > + buf_name, > + b->format.width, > + b->format.height, > + b->format.colorformat); > + > + for (i = 0; i < pix_mp->num_planes; ++i) { > + u32 stride = mtk_dip_pipe_get_stride(pipe, pix_mp, mdp_fmt, > + i, buf_name); Shouldn't stride be just equal to pix_mp.plane[i].bytesperline? > + > + b->format.plane_fmt[i].stride = stride; > + b->format.plane_fmt[i].size = Shouldn't size be just equal to pix_mp.plane[i].sizeimage? > + dip_mdp_fmt_get_plane_size(mdp_fmt, stride, > + pix_mp->height, i); > + b->iova[i] = dev_buf->isp_daddr[i]; > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "Non-contiguous-mp-buf:plane(%i),stride(%d),size(%d),iova(%lx)", > + i, > + b->format.plane_fmt[i].stride, > + b->format.plane_fmt[i].size, > + b->iova[i]); > + total_plane_size += b->format.plane_fmt[i].size; > + } > + > + if (!is_contig_mp_buffer(dev_buf)) { Shouldn't this be just (pix_mp->num_planes > 1)? > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "Non-contiguous-mp-buf(%s),total-plane-size(%d),dma_port(%d)\n", > + buf_name, > + total_plane_size, > + b->usage); > + return 0; > + } > + > + for (; i < MDP_COLOR_GET_PLANE_COUNT(b->format.colorformat); ++i) { I don't see these MDP_ macros defined anywhere. Please don't use macros defined from other drivers. We can embed this information in the mtk_dip_dev_format struct. One would normally call it num_cplanes (color planes). However, I would just make this driver support M formats only and forget about formats with only memory planes count != color planes count. > + u32 stride = dip_mdp_fmt_get_stride_contig > + (mdp_fmt, b->format.plane_fmt[0].stride, i); > + > + b->format.plane_fmt[i].stride = stride; > + b->format.plane_fmt[i].size = > + dip_mdp_fmt_get_plane_size(mdp_fmt, stride, > + pix_mp->height, i); > + b->iova[i] = b->iova[i - 1] + b->format.plane_fmt[i - 1].size; > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "Contiguous-mp-buf:plane(%i),stride(%d),size(%d),iova(%lx)", > + i, > + b->format.plane_fmt[i].stride, > + b->format.plane_fmt[i].size, > + b->iova[i]); > + total_plane_size += b->format.plane_fmt[i].size; > + } > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "Contiguous-mp-buf(%s),v4l2-sizeimage(%d),total-plane-size(%d)\n", > + buf_name, > + pix_mp->plane_fmt[0].sizeimage, > + total_plane_size); > + > + return 0; > +} > + > +static int fill_input_ipi_param(struct mtk_dip_pipe *pipe, > + struct img_input *iin, > + struct mtk_dip_dev_buffer *dev_buf, > + char *buf_name) > +{ > + struct img_image_buffer *img = &iin->buffer; > + > + return fill_ipi_img_param_mp(pipe, img, dev_buf, > + buf_name); > +} > + > +static int fill_output_ipi_param(struct mtk_dip_pipe *pipe, > + struct img_output *iout, > + struct mtk_dip_dev_buffer *dev_buf_out, > + struct mtk_dip_dev_buffer *dev_buf_in, > + char *buf_name) > +{ > + int ret; > + struct img_image_buffer *img = &iout->buffer; > + > + ret = fill_ipi_img_param_mp(pipe, img, dev_buf_out, > + buf_name); > + iout->crop.left = 0; > + iout->crop.top = 0; > + iout->crop.width = dev_buf_in->fmt.fmt.pix_mp.width; > + iout->crop.height = dev_buf_in->fmt.fmt.pix_mp.height; > + iout->crop.left_subpix = 0; > + iout->crop.top_subpix = 0; > + iout->crop.width_subpix = 0; > + iout->crop.height_subpix = 0; So we don't support cropping? > + iout->rotation = dev_buf_out->rotation; > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s: buf(%s) IPI-ext:c_l(%d),c_t(%d),c_w(%d),c_h(%d)\n", > + pipe->desc->name, > + buf_name, > + iout->crop.left, > + iout->crop.top, > + iout->crop.width, > + iout->crop.height); > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "c_ls(%d),c_ts(%d),c_ws(%d),c_hs(%d),rot(%d)\n", > + iout->crop.left_subpix, > + iout->crop.top_subpix, > + iout->crop.width_subpix, > + iout->crop.height_subpix, > + iout->rotation); > + > + return ret; > +} > + > +void mtk_dip_pipe_ipi_params_config(struct mtk_dip_request *req) > +{ > + struct mtk_dip_pipe *pipe = req->dip_pipe; > + struct platform_device *pdev = pipe->dip_dev->pdev; > + struct mtk_dip_pipe_job_info *pipe_job_info = &req->job_info; > + int out_img_buf_idx; > + int in_img_buf_idx; > + struct img_ipi_frameparam *dip_param = &req->img_fparam.frameparam; > + struct mtk_dip_dev_buffer *dev_buf_in; > + struct mtk_dip_dev_buffer *dev_buf_out; > + struct mtk_dip_dev_buffer *dev_buf_tuning; > + int i = 0; > + int mdp_ids[2] = {MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE, > + MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE}; > + char *mdp_names[2] = {"mdp0", "mdp1"}; > + > + dev_dbg(&pdev->dev, > + "%s:%s: pipe-job id(%d)\n", > + __func__, pipe->desc->name, > + pipe_job_info->id); > + > + /* Fill ipi params for DIP driver */ > + memset(dip_param, 0, sizeof(*dip_param)); > + dip_param->index = pipe_job_info->id; > + dip_param->type = STREAM_ISP_IC; > + > + /* Tuning buffer */ > + dev_buf_tuning = > + pipe_job_info->buf_map[MTK_DIP_VIDEO_NODE_ID_TUNING_OUT]; > + if (dev_buf_tuning) { > + dev_dbg(&pdev->dev, > + "Tuning buf queued: scp_daddr(%pad),isp_daddr(%pad)\n", > + &dev_buf_tuning->scp_daddr[0], > + &dev_buf_tuning->isp_daddr[0]); > + dip_param->tuning_data.pa = > + (uint32_t)dev_buf_tuning->scp_daddr[0]; > + dip_param->tuning_data.present = true; > + dip_param->tuning_data.iova = > + (uint32_t)dev_buf_tuning->isp_daddr[0]; Why are these casts needed? > + } else { > + dev_dbg(&pdev->dev, > + "No enqueued tuning buffer: scp_daddr(%llx),present(%llx),isp_daddr(%llx\n", > + dip_param->tuning_data.pa, > + dip_param->tuning_data.present, > + dip_param->tuning_data.iova); > + } > + > + in_img_buf_idx = 0; > + > + /* Raw-in buffer */ > + dev_buf_in = > + pipe_job_info->buf_map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT]; > + if (dev_buf_in) { > + struct img_input *iin = &dip_param->inputs[in_img_buf_idx]; > + > + fill_input_ipi_param(pipe, iin, dev_buf_in, "RAW"); > + in_img_buf_idx++; > + } Is it possible that we don't have an input buffer? > + > + /* Array of MDP buffers */ > + out_img_buf_idx = 0; > + > + for (i = 0; i < ARRAY_SIZE(mdp_ids); i++) { > + dev_buf_out = > + pipe_job_info->buf_map[mdp_ids[i]]; > + if (dev_buf_out) { > + struct img_output *iout = > + &dip_param->outputs[out_img_buf_idx]; > + > + fill_output_ipi_param(pipe, iout, dev_buf_out, > + dev_buf_in, mdp_names[i]); > + out_img_buf_idx++; > + } > + } > + > + dip_param->num_outputs = out_img_buf_idx; > + dip_param->num_inputs = in_img_buf_idx; Wouldn't this be always 1? > +} > + > +void mtk_dip_pipe_try_enqueue(struct mtk_dip_pipe *pipe) > +{ > + struct mtk_dip_pipe_job_info *job_info; > + struct mtk_dip_pipe_job_info *tmp_job_info; > + struct list_head enqueue_job_list; > + > + INIT_LIST_HEAD(&enqueue_job_list); You can merge this with the declaration by using > + if (!pipe->streaming) > + return; > + > + spin_lock(&pipe->job_lock); > + list_for_each_entry_safe(job_info, tmp_job_info, > + &pipe->pipe_job_pending_list, > + list) { > + list_del(&job_info->list); > + pipe->num_pending_jobs--; > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s: current num of pending jobs(%d)\n", > + __func__, pipe->desc->name, > + pipe->num_pending_jobs); > + list_add_tail(&job_info->list, > + &enqueue_job_list); > + } > + spin_unlock(&pipe->job_lock); > + > + list_for_each_entry_safe(job_info, tmp_job_info, > + &enqueue_job_list, > + list) { > + struct mtk_dip_request *req = > + mtk_dip_pipe_job_info_to_req(job_info); > + > + list_del(&job_info->list); > + > + spin_lock(&pipe->job_lock); > + list_add_tail(&job_info->list, > + &pipe->pipe_job_running_list); > + pipe->num_jobs++; > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s: current num of running jobs(%d)\n", > + __func__, pipe->desc->name, > + pipe->num_jobs); > + spin_unlock(&pipe->job_lock); > + > + mtk_dip_hw_enqueue(&pipe->dip_dev->dip_hw, req); > + } Please check my comments to the P1 RFCv3 for a similar block of code. > +} > diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h > new file mode 100644 > index 000000000000..e3372c291f9a > --- /dev/null > +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h > @@ -0,0 +1,337 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (c) 2018 MediaTek Inc. > + * > + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > + * > + */ > + > +#ifndef _MTK_DIP_DEV_H_ > +#define _MTK_DIP_DEV_H_ > + > +#include <linux/types.h> > +#include <linux/platform_device.h> > +#include <media/v4l2-ctrls.h> > +#include <media/v4l2-subdev.h> > +#include <media/v4l2-device.h> > +#include <linux/videodev2.h> > +#include <media/videobuf2-core.h> > +#include <media/videobuf2-v4l2.h> > + > +#include "mtk_dip-hw.h" > + > +#define MTK_DIP_PIPE_ID_PREVIEW 0 > +#define MTK_DIP_PIPE_ID_CAPTURE 1 > +#define MTK_DIP_PIPE_ID_REPROCESS 2 > +#define MTK_DIP_PIPE_ID_TOTAL_NUM 3 > + > +#define MTK_DIP_VIDEO_NODE_ID_RAW_OUT 0 > +#define MTK_DIP_VIDEO_NODE_ID_TUNING_OUT 1 > +#define MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM 2 > +#define MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE 2 > +#define MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE 3 > +#define MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM 2 > +#define MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM \ > + (MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM + \ > + MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM) > + > +#define MTK_DIP_VIDEO_NODE_ID_NO_MASTER -1 > + > +#define MTK_DIP_OUTPUT_MIN_WIDTH 2U > +#define MTK_DIP_OUTPUT_MIN_HEIGHT 2U > +#define MTK_DIP_OUTPUT_MAX_WIDTH 5376U > +#define MTK_DIP_OUTPUT_MAX_HEIGHT 4032U > +#define MTK_DIP_CAPTURE_MIN_WIDTH 2U > +#define MTK_DIP_CAPTURE_MIN_HEIGHT 2U > +#define MTK_DIP_CAPTURE_MAX_WIDTH 5376U > +#define MTK_DIP_CAPTURE_MAX_HEIGHT 4032U > + > +#define MTK_DIP_DEV_DIP_MEDIA_MODEL_NAME "MTK-ISP-DIP-V4L2" > +#define MTK_DIP_DEV_DIP_PREVIEW_NAME \ > + MTK_DIP_DEV_DIP_MEDIA_MODEL_NAME > +#define MTK_DIP_DEV_DIP_CAPTURE_NAME "MTK-ISP-DIP-CAP-V4L2" > +#define MTK_DIP_DEV_DIP_REPROCESS_NAME "MTK-ISP-DIP-REP-V4L2" Could we have a bit more user friendly names here? For example: Driver name: "mtk-cam-dip" Preview pipe: "%s %s", dev_driver_string(), "preview" Capture pipe: "%s %s", dev_driver_string(), "capture" Preview pipe: "%s %s", dev_driver_string(), "reprocess" (For reference, I suggested "mtk-cam-p1" for P1, so that would be consistent with the above.) > + > +#define MTK_DIP_DEV_META_BUF_DEFAULT_SIZE (1024 * 128) > +#define MTK_DIP_DEV_META_BUF_POOL_MAX_SIZE (1024 * 1024 * 6) > + > +#define V4L2_CID_MTK_DIP_MAX 100 Why 100? I think we just have 1 rotation control. Please just use 1 explicitly in the code, without this intermediate constant. > + > +enum mtk_dip_pixel_mode { > + mtk_dip_pixel_mode_default = 0, > + mtk_dip_pixel_mode_1, > + mtk_dip_pixel_mode_2, > + mtk_dip_pixel_mode_4, > + mtk_dip_pixel_mode_num, > +}; This doesn't seem to be used anywhere. > + > +struct mtk_dip_dev_format { > + u32 format; > + u32 mdp_color; > + u32 colorspace; > + u8 depth[VIDEO_MAX_PLANES]; > + u8 row_depth[VIDEO_MAX_PLANES]; > + u8 num_planes; > + u8 walign; > + u8 halign; > + u8 salign; > + u32 flags; > + u32 buffer_size; > +}; Please document all the structures defined in the driver using kerneldoc. > + > +struct mtk_dip_pipe_job_info { > + int id; > + struct mtk_dip_dev_buffer* > + buf_map[MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM]; > + struct list_head list; > +}; Is there any reason to separate this from mtk_dip_request? > + > +struct mtk_dip_dev_buffer { > + struct vb2_v4l2_buffer vbb; > + struct v4l2_format fmt; > + const struct mtk_dip_dev_format *dev_fmt; > + int pipe_job_id; > + dma_addr_t isp_daddr[VB2_MAX_PLANES]; > + dma_addr_t scp_daddr[VB2_MAX_PLANES]; > + unsigned int dma_port; > + int rotation; > + struct list_head list; > +}; > + > +struct mtk_dip_pipe_desc { > + char *name; Shouldn't this be const char *? > + int master; > + int id; > + const struct mtk_dip_video_device_desc *output_queue_descs; > + int total_output_queues; > + const struct mtk_dip_video_device_desc *capture_queue_descs; > + int total_capture_queues; > +}; > + > +struct mtk_dip_video_device_desc { > + int id; > + char *name; Shouldn't this be const char *? > + u32 buf_type; > + u32 cap; > + int smem_alloc; > + const struct mtk_dip_dev_format *fmts; > + int num_fmts; > + char *description; Shouldn't this be const char *? > + int default_width; > + int default_height; > + unsigned int dma_port; > + const struct v4l2_frmsizeenum *frmsizeenum; > + const struct v4l2_ioctl_ops *ops; > + u32 flags; > + int default_fmt_idx; > +}; > + > +struct mtk_dip_dev_queue { > + struct vb2_queue vbq; > + /* Serializes vb2 queue and video device operations */ > + struct mutex lock; > + const struct mtk_dip_dev_format *dev_fmt; > + int rotation; > +}; > + > +struct mtk_dip_video_device { > + struct video_device vdev; > + struct mtk_dip_dev_queue dev_q; > + struct v4l2_format vdev_fmt; > + struct media_pad vdev_pad; > + struct v4l2_mbus_framefmt pad_fmt; > + struct v4l2_ctrl_handler ctrl_handler; > + u32 flags; > + const struct mtk_dip_video_device_desc *desc; > + atomic_t sequence; > + struct list_head buf_list; > + /* protect the in-device buffer list */ > + spinlock_t buf_list_lock; > +}; > + > +struct mtk_dip_pipe { > + struct mtk_dip_dev *dip_dev; > + struct mtk_dip_video_device nodes[MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM]; > + int num_nodes; > + atomic_t cnt_nodes_not_streaming; > + int streaming; > + struct media_pad *subdev_pads; > + struct media_pipeline pipeline; > + struct v4l2_subdev subdev; > + struct v4l2_subdev_fh *fh; > + atomic_t pipe_job_sequence; > + struct list_head pipe_job_pending_list; > + int num_pending_jobs; > + struct list_head pipe_job_running_list; > + int num_jobs; > + /* Serializes pipe's stream on/off and buffers enqueue operations */ > + struct mutex lock; > + spinlock_t job_lock; /* protect the pipe job list */ > + const struct mtk_dip_pipe_desc *desc; > +}; > + > +struct mtk_dip_dev { > + struct platform_device *pdev; > + struct media_device mdev; > + struct v4l2_device v4l2_dev; > + struct mtk_dip_pipe dip_pipe[MTK_DIP_PIPE_ID_TOTAL_NUM]; > + struct mtk_dip_hw dip_hw; nit: There isn't much benefit from having the separate mtk_dip_hw struct here. On the contrary it causes long dereference chains, which only clutter the code, e.g. "&pipe->dip_dev->dip_hw.scp_pdev->dev". > +}; > + > +struct mtk_dip_request { > + struct media_request req; > + struct mtk_dip_pipe *dip_pipe; > + struct mtk_dip_pipe_job_info job_info; Is there a need to have mtk_dip_pipe_job_info as a separate struct rather than just having the fields here? > + struct img_frameparam img_fparam; > + struct work_struct fw_work; > + struct work_struct mdp_work; > + /* It is used only in timeout handling flow */ > + struct work_struct mdpcb_work; > + struct mtk_dip_hw_subframe *working_buf; > + atomic_t buf_count; > +}; > + > +int mtk_dip_dev_media_register(struct device *dev, > + struct media_device *media_dev, > + const char *model); > + > +void mtk_dip_dev_v4l2_release(struct mtk_dip_dev *dip_dev); > + > +int mtk_dip_dev_v4l2_register(struct device *dev, > + struct media_device *media_dev, > + struct v4l2_device *v4l2_dev); > + > +int mtk_dip_pipe_v4l2_register(struct mtk_dip_pipe *pipe, > + struct media_device *media_dev, > + struct v4l2_device *v4l2_dev); > + > +void mtk_dip_pipe_v4l2_unregister(struct mtk_dip_pipe *pipe); > + > +int mtk_dip_pipe_queue_buffers(struct media_request *req, int initial); > + > +int mtk_dip_pipe_init(struct mtk_dip_pipe *pipe, > + struct mtk_dip_dev *dip_dev, > + const struct mtk_dip_pipe_desc *setting, > + struct media_device *media_dev, > + struct v4l2_device *v4l2_dev); > + > +void mtk_dip_pipe_ipi_params_config(struct mtk_dip_request *req); > + > +int mtk_dip_pipe_release(struct mtk_dip_pipe *pipe); > + > +struct mtk_dip_pipe_job_info * > +mtk_dip_pipe_get_running_job_info(struct mtk_dip_pipe *pipe, > + int pipe_job_id); > + > +int mtk_dip_pipe_next_job_id(struct mtk_dip_pipe *pipe); > + > +void mtk_dip_pipe_debug_job(struct mtk_dip_pipe *pipe, > + struct mtk_dip_pipe_job_info *pipe_job_info); > + > +int mtk_dip_pipe_job_finish(struct mtk_dip_pipe *pipe, > + unsigned int pipe_job_info_id, > + enum vb2_buffer_state state); > + > +const struct mtk_dip_dev_format * > +mtk_dip_pipe_find_fmt(struct mtk_dip_pipe *pipe, > + struct mtk_dip_video_device *node, > + u32 format); > + > +void mtk_dip_pipe_set_img_fmt(struct mtk_dip_pipe *pipe, > + struct mtk_dip_video_device *node, > + struct v4l2_pix_format_mplane *mfmt_to_fill, > + const struct mtk_dip_dev_format *dev_fmt); > + > +void mtk_dip_pipe_load_default_fmt(struct mtk_dip_pipe *pipe, > + struct mtk_dip_video_device *node, > + struct v4l2_format *fmt_to_fill); > + > +void mtk_dip_pipe_try_enqueue(struct mtk_dip_pipe *pipe); > + > +void mtk_dip_hw_enqueue(struct mtk_dip_hw *dip_hw, struct mtk_dip_request *req); > + > +int mtk_dip_hw_streamoff(struct mtk_dip_pipe *pipe); > + > +int mtk_dip_hw_streamon(struct mtk_dip_pipe *pipe); > + > +static inline struct mtk_dip_pipe* > +mtk_dip_dev_get_pipe(struct mtk_dip_dev *dip_dev, unsigned int pipe_id) > +{ > + if (pipe_id < 0 && pipe_id >= MTK_DIP_PIPE_ID_TOTAL_NUM) > + return NULL; > + > + return &dip_dev->dip_pipe[pipe_id]; > +} > + > +static inline struct mtk_dip_video_device* > +mtk_dip_file_to_node(struct file *file) > +{ > + return container_of(video_devdata(file), > + struct mtk_dip_video_device, vdev); > +} > + > +static inline struct mtk_dip_pipe* > +mtk_dip_subdev_to_pipe(struct v4l2_subdev *sd) > +{ > + return container_of(sd, struct mtk_dip_pipe, subdev); > +} > + > +static inline struct mtk_dip_dev* > +mtk_dip_mdev_to_dev(struct media_device *mdev) > +{ > + return container_of(mdev, struct mtk_dip_dev, mdev); > +} > + > +static inline struct mtk_dip_video_device* > +mtk_dip_vbq_to_node(struct vb2_queue *vq) > +{ > + return container_of(vq, struct mtk_dip_video_device, dev_q.vbq); > +} > + > +static inline struct mtk_dip_dev_buffer* > +mtk_dip_vb2_buf_to_dev_buf(struct vb2_buffer *vb) > +{ > + return container_of(vb, struct mtk_dip_dev_buffer, vbb.vb2_buf); > +} > + > +static inline struct mtk_dip_dev *mtk_dip_hw_to_dev(struct mtk_dip_hw *dip_hw) > +{ > + return container_of(dip_hw, struct mtk_dip_dev, dip_hw); > +} > + > +static inline struct mtk_dip_request* > +mtk_dip_pipe_job_info_to_req(struct mtk_dip_pipe_job_info *job_info) > +{ > + return container_of(job_info, struct mtk_dip_request, job_info); > +} > + > +static inline struct mtk_dip_request* > +mtk_dip_hw_fw_work_to_req(struct work_struct *fw_work) > +{ > + return container_of(fw_work, struct mtk_dip_request, fw_work); > +} > + > +static inline struct mtk_dip_request* > +mtk_dip_hw_mdp_work_to_req(struct work_struct *mdp_work) > +{ > + return container_of(mdp_work, struct mtk_dip_request, mdp_work); > +} > + > +static inline struct mtk_dip_request * > +mtk_dip_hw_mdpcb_work_to_req(struct work_struct *mdpcb_work) > +{ > + return container_of(mdpcb_work, struct mtk_dip_request, mdpcb_work); > +} > + > +static inline int mtk_dip_buf_is_meta(u32 type) > +{ > + return type == V4L2_BUF_TYPE_META_CAPTURE || > + type == V4L2_BUF_TYPE_META_OUTPUT; > +} > + > +static inline int mtk_dip_pipe_get_pipe_from_job_id(int pipe_job_id) > +{ > + return (pipe_job_id >> 16) & 0x0000FFFF; Please use lowercase for hex numbers. > +} > + > +#endif /* _MTK_DIP_DEV_H_ */ > diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h > new file mode 100644 > index 000000000000..2dd4dae4336c > --- /dev/null > +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h > @@ -0,0 +1,155 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (c) 2018 MediaTek Inc. > + * > + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > + * Holmes Chiou <holmes.chiou-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > + * > + */ > + > +#ifndef _MTK_DIP_HW_H_ > +#define _MTK_DIP_HW_H_ > + > +#include <linux/clk.h> > +#include "mtk-img-ipi.h" > + > +#define DIP_COMPOSER_THREAD_TIMEOUT 16U Unused. > +#define DIP_COMPOSING_MAX_NUM 3 > +#define DIP_MAX_ERR_COUNT 188U > +#define DIP_FLUSHING_WQ_TIMEOUT (16U * DIP_MAX_ERR_COUNT) Any rationale behind this particular numbers? Please add comments explaining them. > + > +#define DIP_FRM_SZ (76 * 1024) > +#define DIP_SUB_FRM_SZ (16 * 1024) > +#define DIP_TUNING_SZ (32 * 1024) > +#define DIP_COMP_SZ (24 * 1024) > +#define DIP_FRAMEPARAM_SZ (4 * 1024) > + > +#define DIP_TUNING_OFFSET DIP_SUB_FRM_SZ > +#define DIP_COMP_OFFSET (DIP_TUNING_OFFSET + DIP_TUNING_SZ) > +#define DIP_FRAMEPARAM_OFFSET (DIP_COMP_OFFSET + DIP_COMP_SZ) > +#define DIP_SUB_FRM_DATA_NUM 32 > +#define DIP_SCP_WORKINGBUF_OFFSET (5 * 1024 * 1024) What is this offset? It's 5 MB, which is 2x bigger than the total frame data (32 * 76 * 1024). > +#define DIP_V4l2_META_BUF_OFFSET (DIP_SCP_WORKINGBUF_OFFSET + \ Please use only uppsercase in macro names. That said, this macro isn't used anywhere. > + DIP_SUB_FRM_DATA_NUM * DIP_FRM_SZ) > + > +#define MTK_DIP_CLK_NUM 2 > + > +enum STREAM_TYPE_ENUM { > + STREAM_UNKNOWN, > + STREAM_BITBLT, > + STREAM_GPU_BITBLT, > + STREAM_DUAL_BITBLT, > + STREAM_2ND_BITBLT, > + STREAM_ISP_IC, > + STREAM_ISP_VR, > + STREAM_ISP_ZSD, > + STREAM_ISP_IP, > + STREAM_ISP_VSS, > + STREAM_ISP_ZSD_SLOW, > + STREAM_WPE, > + STREAM_WPE2, > +}; > + > +enum mtk_dip_hw_user_state { > + DIP_STATE_INIT = 0, > + DIP_STATE_OPENED, > + DIP_STATE_STREAMON, > + DIP_STATE_STREAMOFF > +}; Are these 2 enums above a part of the firmware ABI? > + > +struct mtk_dip_hw_working_buf { > + dma_addr_t scp_daddr; > + void *vaddr; > + dma_addr_t isp_daddr; > +}; > + > +struct mtk_dip_hw_subframe { > + struct mtk_dip_hw_working_buf buffer; > + int size; > + struct mtk_dip_hw_working_buf config_data; > + struct mtk_dip_hw_working_buf tuning_buf; > + struct mtk_dip_hw_working_buf frameparam; > + struct list_head list_entry; > +}; > + > +enum frame_state { > + FRAME_STATE_INIT = 0, > + FRAME_STATE_COMPOSING, > + FRAME_STATE_RUNNING, > + FRAME_STATE_DONE, > + FRAME_STATE_STREAMOFF, > + FRAME_STATE_ERROR, > + FRAME_STATE_HW_TIMEOUT > +}; Are these values a part of the firmware ABI? If so, they should be defined as macros, with explicit values assigned. > + > +struct mtk_dip_hw_working_buf_list { > + struct list_head list; > + u32 cnt; > + spinlock_t lock; /* protect the list and cnt */ > + > +}; > + > +struct mtk_dip_hw { > + struct clk_bulk_data clks[MTK_DIP_CLK_NUM]; > + struct workqueue_struct *composer_wq; > + struct workqueue_struct *mdp_wq; > + wait_queue_head_t working_buf_wq; > + wait_queue_head_t flushing_wq; > + wait_queue_head_t flushing_hw_wq; > + atomic_t num_composing; /* increase after ipi */ > + /* increase after calling MDP driver */ > + atomic_t num_running; > + /*MDP/GCE callback workqueue */ > + struct workqueue_struct *mdpcb_workqueue; > + /* for MDP driver */ > + struct platform_device *mdp_pdev; > + /* for SCP driver */ > + struct platform_device *scp_pdev; > + struct rproc *rproc_handle; > + struct mtk_dip_hw_working_buf_list dip_freebufferlist; > + struct mtk_dip_hw_working_buf_list dip_usedbufferlist; > + dma_addr_t working_buf_mem_scp_daddr; > + void *working_buf_mem_vaddr; > + dma_addr_t working_buf_mem_isp_daddr; > + int working_buf_mem_size; > + struct mtk_dip_hw_subframe working_buf[DIP_SUB_FRM_DATA_NUM]; > + /* increase after enqueue */ > + atomic_t dip_enque_cnt; > + /* increase after stream on, decrease when stream off */ > + atomic_t dip_stream_cnt; > + /* To serialize request opertion to DIP co-procrosser and hadrware */ > + struct mutex hw_op_lock; > + /* To restrict the max number of request be send to SCP */ > + struct semaphore sem; > +}; > + > +static inline void > +mtk_dip_wbuf_to_ipi_img_sw_addr(struct img_sw_addr *ipi_addr, > + struct mtk_dip_hw_working_buf *wbuf) > +{ > + ipi_addr->va = (u64)wbuf->vaddr; Why would IPI need VA? Actually, we shouldn't even pass kernel pointers to the firmware for security reasons. > + ipi_addr->pa = (u32)wbuf->scp_daddr; > +} > + > +static inline void > +mtk_dip_wbuf_to_ipi_img_addr(struct img_addr *ipi_addr, > + struct mtk_dip_hw_working_buf *wbuf) > +{ > + ipi_addr->va = (u64)wbuf->vaddr; Ditto. > + ipi_addr->pa = (u32)wbuf->scp_daddr; > + ipi_addr->iova = (u32)wbuf->isp_daddr; > +} > + > +static inline void > +mtk_dip_wbuf_to_ipi_tuning_addr(struct tuning_addr *ipi_addr, > + struct mtk_dip_hw_working_buf *wbuf) > +{ > + ipi_addr->pa = (u32)wbuf->scp_daddr; > + ipi_addr->iova = (u32)wbuf->isp_daddr; > +} > + > +int mtk_dip_hw_working_buf_pool_init(struct mtk_dip_hw *dip_hw); > +void mtk_dip_hw_working_buf_pool_release(struct mtk_dip_hw *dip_hw); > + > +#endif /* _MTK_DIP_HW_H_ */ > + > diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c > new file mode 100644 > index 000000000000..603be116b03f > --- /dev/null > +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c > @@ -0,0 +1,794 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2018 MediaTek Inc. > + * > + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > + * Holmes Chiou <holmes.chiou-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > + * > + */ > + > +#include <linux/device.h> > +#include <linux/dma-iommu.h> > +#include <linux/freezer.h> > +#include <linux/platform_data/mtk_scp.h> > +#include <linux/pm_runtime.h> > +#include <linux/remoteproc.h> > +#include <linux/slab.h> > +#include <linux/spinlock.h> > +#include <linux/wait.h> > +#include "mtk-mdp3-cmdq.h" > +#include "mtk_dip-dev.h" > +#include "mtk_dip-hw.h" > + > +int mtk_dip_hw_working_buf_pool_init(struct mtk_dip_hw *dip_hw) > +{ > + int i; > + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); > + const int working_buf_size = round_up(DIP_FRM_SZ, PAGE_SIZE); > + phys_addr_t working_buf_paddr; > + > + INIT_LIST_HEAD(&dip_hw->dip_freebufferlist.list); > + spin_lock_init(&dip_hw->dip_freebufferlist.lock); > + dip_hw->dip_freebufferlist.cnt = 0; > + > + INIT_LIST_HEAD(&dip_hw->dip_usedbufferlist.list); > + spin_lock_init(&dip_hw->dip_usedbufferlist.lock); > + dip_hw->dip_usedbufferlist.cnt = 0; > + > + init_waitqueue_head(&dip_hw->working_buf_wq); > + > + dip_hw->working_buf_mem_size = DIP_SUB_FRM_DATA_NUM * working_buf_size + > + DIP_SCP_WORKINGBUF_OFFSET; > + dip_hw->working_buf_mem_vaddr = > + dma_alloc_coherent(&dip_hw->scp_pdev->dev, > + dip_hw->working_buf_mem_size, > + &dip_hw->working_buf_mem_scp_daddr, > + GFP_KERNEL); > + if (!dip_hw->working_buf_mem_vaddr) { > + dev_err(&dip_dev->pdev->dev, > + "memory alloc size %ld failed\n", > + dip_hw->working_buf_mem_size); > + return -ENOMEM; > + } > + > + /* > + * We got the incorrect physical address mapped when > + * using dma_map_single() so I used dma_map_page_attrs() > + * directly to workaround here. > + * > + * When I use dma_map_single() to map the address, the > + * physical address retrieved back with iommu_get_domain_for_dev() > + * and iommu_iova_to_phys() was not equal to the > + * SCP dma address (it should be the same as the physical address > + * since we don't have iommu), and was shifted by 0x4000000. > + */ > + working_buf_paddr = dip_hw->working_buf_mem_scp_daddr; > + dip_hw->working_buf_mem_isp_daddr = > + dma_map_page_attrs(&dip_dev->pdev->dev, > + phys_to_page(working_buf_paddr), > + 0, dip_hw->working_buf_mem_size, > + DMA_BIDIRECTIONAL, > + DMA_ATTR_SKIP_CPU_SYNC); > + if (dma_mapping_error(&dip_dev->pdev->dev, > + dip_hw->working_buf_mem_isp_daddr)) { > + dev_err(&dip_dev->pdev->dev, > + "failed to map buffer: s_daddr(%pad)\n", > + &dip_hw->working_buf_mem_scp_daddr); > + dma_free_coherent(&dip_hw->scp_pdev->dev, > + dip_hw->working_buf_mem_size, > + dip_hw->working_buf_mem_vaddr, > + dip_hw->working_buf_mem_scp_daddr); > + > + return -ENOMEM; > + } > + > + dev_dbg(&dip_dev->pdev->dev, > + "%s: working_buf_mem: vaddr(%p), scp_daddr(%pad)\n", > + __func__, > + dip_hw->working_buf_mem_vaddr, > + &dip_hw->working_buf_mem_scp_daddr); > + > + for (i = 0; i < DIP_SUB_FRM_DATA_NUM; i++) { > + struct mtk_dip_hw_subframe *buf = &dip_hw->working_buf[i]; > + > + /* > + * Total: 0 ~ 72 KB > + * SubFrame: 0 ~ 16 KB > + */ > + buf->buffer.scp_daddr = dip_hw->working_buf_mem_scp_daddr + > + DIP_SCP_WORKINGBUF_OFFSET + i * working_buf_size; > + buf->buffer.vaddr = dip_hw->working_buf_mem_vaddr + > + DIP_SCP_WORKINGBUF_OFFSET + i * working_buf_size; > + buf->buffer.isp_daddr = dip_hw->working_buf_mem_isp_daddr + > + DIP_SCP_WORKINGBUF_OFFSET + i * working_buf_size; Could you move out the offset to a local variable so that we don't duplicate the same calculation 3 times? > + buf->size = working_buf_size; > + > + dev_dbg(&dip_dev->pdev->dev, > + "%s: buf(%d), scp_daddr(%pad), isp_daddr(%pad)\n", > + __func__, i, &buf->buffer.scp_daddr, > + &buf->buffer.isp_daddr); > + > + /* Tuning: 16 ~ 48 KB */ > + buf->tuning_buf.scp_daddr = > + buf->buffer.scp_daddr + DIP_TUNING_OFFSET; > + buf->tuning_buf.vaddr = > + buf->buffer.vaddr + DIP_TUNING_OFFSET; > + buf->tuning_buf.isp_daddr = > + buf->buffer.isp_daddr + DIP_TUNING_OFFSET; > + > + dev_dbg(&dip_dev->pdev->dev, > + "%s: tuning_buf(%d), scp_daddr(%pad), isp_daddr(%pad)\n", > + __func__, i, &buf->tuning_buf.scp_daddr, > + &buf->tuning_buf.isp_daddr); > + > + /* Config_data: 48 ~ 72 KB */ > + buf->config_data.scp_daddr = > + buf->buffer.scp_daddr + DIP_COMP_OFFSET; > + buf->config_data.vaddr = buf->buffer.vaddr + DIP_COMP_OFFSET; > + > + dev_dbg(&dip_dev->pdev->dev, > + "%s: config_data(%d), scp_daddr(%pad), vaddr(%p)\n", > + __func__, i, &buf->config_data.scp_daddr, > + buf->config_data.vaddr); > + > + /* Frame parameters: 72 ~ 76 KB */ > + buf->frameparam.scp_daddr = > + buf->buffer.scp_daddr + DIP_FRAMEPARAM_OFFSET; > + buf->frameparam.vaddr = > + buf->buffer.vaddr + DIP_FRAMEPARAM_OFFSET; > + > + dev_dbg(&dip_dev->pdev->dev, > + "%s: frameparam(%d), scp_daddr(%pad), vaddr(%p)\n", > + __func__, i, &buf->frameparam.scp_daddr, > + buf->frameparam.vaddr); > + > + list_add_tail(&buf->list_entry, > + &dip_hw->dip_freebufferlist.list); > + dip_hw->dip_freebufferlist.cnt++; > + } > + > + return 0; > +} > + > +void mtk_dip_hw_working_buf_pool_release(struct mtk_dip_hw *dip_hw) > +{ > + /* All the buffer should be in the freebufferlist when release */ > + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); > + u32 i; > + > + if (dip_hw->dip_usedbufferlist.cnt) > + dev_warn(&dip_dev->pdev->dev, > + "%s: dip_usedbufferlist is not empty (%d/%d)\n", > + __func__, dip_hw->dip_usedbufferlist.cnt, i); > + > + dma_unmap_page_attrs(&dip_dev->pdev->dev, > + dip_hw->working_buf_mem_isp_daddr, > + dip_hw->working_buf_mem_size, DMA_BIDIRECTIONAL, > + DMA_ATTR_SKIP_CPU_SYNC); > + > + dma_free_coherent(&dip_hw->scp_pdev->dev, dip_hw->working_buf_mem_size, > + dip_hw->working_buf_mem_vaddr, > + dip_hw->working_buf_mem_scp_daddr); > +} > + > +static void mtk_dip_hw_working_buf_free(struct mtk_dip_hw *dip_hw, > + struct mtk_dip_hw_subframe *working_buf) > +{ > + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); > + > + if (!working_buf) > + return; > + > + spin_lock(&dip_hw->dip_usedbufferlist.lock); > + list_del(&working_buf->list_entry); > + dip_hw->dip_usedbufferlist.cnt--; > + dev_dbg(&dip_dev->pdev->dev, > + "%s: Free used buffer(%pad)\n", > + __func__, &working_buf->buffer.scp_daddr); > + spin_unlock(&dip_hw->dip_usedbufferlist.lock); > + > + spin_lock(&dip_hw->dip_freebufferlist.lock); > + list_add_tail(&working_buf->list_entry, > + &dip_hw->dip_freebufferlist.list); > + dip_hw->dip_freebufferlist.cnt++; > + spin_unlock(&dip_hw->dip_freebufferlist.lock); > +} > + > +static struct mtk_dip_hw_subframe* > +mtk_dip_hw_working_buf_alloc(struct mtk_dip_hw *dip_hw) > +{ > + struct mtk_dip_hw_subframe *working_buf; > + > + spin_lock(&dip_hw->dip_freebufferlist.lock); > + if (list_empty(&dip_hw->dip_freebufferlist.list)) { > + spin_unlock(&dip_hw->dip_freebufferlist.lock); > + return NULL; > + } > + > + working_buf = list_first_entry(&dip_hw->dip_freebufferlist.list, > + struct mtk_dip_hw_subframe, list_entry); > + list_del(&working_buf->list_entry); > + dip_hw->dip_freebufferlist.cnt--; > + spin_unlock(&dip_hw->dip_freebufferlist.lock); > + > + spin_lock(&dip_hw->dip_usedbufferlist.lock); > + list_add_tail(&working_buf->list_entry, > + &dip_hw->dip_usedbufferlist.list); > + dip_hw->dip_usedbufferlist.cnt++; > + spin_unlock(&dip_hw->dip_usedbufferlist.lock); Do we really need this usedbufferlist? > + > + return working_buf; > +} > + > +static void mtk_dip_notify(struct mtk_dip_request *req) > +{ > + struct mtk_dip_hw *dip_hw = &req->dip_pipe->dip_dev->dip_hw; > + struct mtk_dip_dev *dip_dev = req->dip_pipe->dip_dev; > + struct mtk_dip_pipe *pipe = req->dip_pipe; > + struct img_ipi_frameparam *iparam = &req->img_fparam.frameparam; > + enum vb2_buffer_state vbf_state; > + int ret; > + > + if (iparam->state != FRAME_STATE_HW_TIMEOUT) > + vbf_state = VB2_BUF_STATE_DONE; > + else > + vbf_state = VB2_BUF_STATE_ERROR; > + > + ret = mtk_dip_pipe_job_finish(pipe, iparam->index, vbf_state); > + if (ret) > + dev_dbg(&dip_dev->pdev->dev, "%s: finish CB failed(%d)\n", > + __func__, ret); I can see that function only returns 0. > + > + pm_runtime_put_autosuspend(&pipe->dip_dev->pdev->dev); It's necessary to call pm_runtime_mask_last_busy() before this for autosuspend to work in any useful way. > + > + mtk_dip_hw_working_buf_free(dip_hw, req->working_buf); > + req->working_buf = NULL; > + wake_up(&dip_hw->working_buf_wq); > + wake_up(&dip_hw->flushing_wq); > + > + dev_dbg(&dip_dev->pdev->dev, > + "%s:%s: job id(%d), frame_no(%d) finished\n", > + __func__, pipe->desc->name, iparam->index, iparam->frame_no); > +} > + > +static void mdp_cb_timeout_worker(struct work_struct *work) > +{ > + struct mtk_dip_request *req = mtk_dip_hw_mdpcb_work_to_req(work); > + struct img_ipi_param ipi_param; > + > + dev_dbg(&req->dip_pipe->dip_dev->pdev->dev, > + "%s: send frame no(%d) HW timeout dbg IPI\n", > + __func__, req->img_fparam.frameparam.frame_no); > + > + ipi_param.usage = IMG_IPI_DEBUG; > + scp_ipi_send(req->dip_pipe->dip_dev->dip_hw.scp_pdev, SCP_IPI_DIP, > + (void *)&ipi_param, sizeof(ipi_param), 0); > + mtk_dip_notify(req); > +} > + > +/* Maybe in IRQ context of cmdq */ > +static void dip_mdp_cb_func(struct cmdq_cb_data data) > +{ > + struct mtk_dip_request *req; > + struct mtk_dip_dev *dip_dev; > + > + if (!data.data) { > + pr_err("%s: data->data is NULL\n", > + __func__); > + return; > + } I'd just make this: if (WARN_ON(!data.data)) return; > + > + req = data.data; We could just assign this in the declaration and also make the check above test for !req instead. > + dip_dev = req->dip_pipe->dip_dev; > + > + dev_dbg(&dip_dev->pdev->dev, "%s: req(%p), idx(%d), no(%d), s(%d), n_in(%d), n_out(%d)\n", > + __func__, > + req, > + req->img_fparam.frameparam.index, > + req->img_fparam.frameparam.frame_no, > + req->img_fparam.frameparam.state, > + req->img_fparam.frameparam.num_inputs, > + req->img_fparam.frameparam.num_outputs); > + > + if (data.sta != CMDQ_CB_NORMAL) { > + dev_err(&dip_dev->pdev->dev, "%s: frame no(%d) HW timeout\n", > + __func__, req->img_fparam.frameparam.frame_no); > + req->img_fparam.frameparam.state = FRAME_STATE_HW_TIMEOUT; > + INIT_WORK(&req->mdpcb_work, mdp_cb_timeout_worker); > + queue_work(req->dip_pipe->dip_dev->dip_hw.mdpcb_workqueue, > + &req->mdpcb_work); > + } else { > + mtk_dip_notify(req); > + } > +} > + > +static void dip_runner_func(struct work_struct *work) > +{ > + struct mtk_dip_request *req = mtk_dip_hw_mdp_work_to_req(work); > + struct mtk_dip_dev *dip_dev = req->dip_pipe->dip_dev; > + struct img_config *config_data = > + (struct img_config *)req->img_fparam.frameparam.config_data.va; Could we get a proper pointer from the driver (not IPI) structures? I think that should be req->working_buf->config_data? > + u32 num; > + > + /* > + * Call MDP/GCE API to do HW excecution > + * Pass the framejob to MDP driver > + */ > + req->img_fparam.frameparam.state = FRAME_STATE_COMPOSING; Should this be really composing? I thought we just finished composing at this point. > + num = atomic_inc_return(&dip_dev->dip_hw.num_running); I don't see where this counter is decremented. Could we just remove it? > + dev_dbg(&dip_dev->pdev->dev, > + "%s,MDP running num(%d)\n", __func__, num); > + mdp_cmdq_sendtask(dip_dev->dip_hw.mdp_pdev, > + config_data, > + &req->img_fparam.frameparam, > + NULL, > + false, > + dip_mdp_cb_func, > + req); It's not a regular convention in the kernel coding style to wrap the lines for each single argument. > +} > + > +static void dip_scp_handler(void *data, unsigned int len, void *priv) > +{ > + struct mtk_dip_pipe_job_info *pipe_job_info; > + struct mtk_dip_pipe *pipe; > + int pipe_id; > + struct mtk_dip_request *req; > + struct img_ipi_frameparam *frameparam; > + struct mtk_dip_dev *dip_dev = (struct mtk_dip_dev *)priv; > + struct mtk_dip_hw *dip_hw = &dip_dev->dip_hw; > + struct img_ipi_param *ipi_param; > + u32 num; > + int ret; > + > + if (WARN_ONCE(!data, "%s: failed due to NULL data\n", __func__)) > + return; > + > + ipi_param = (struct img_ipi_param *)data; > + > + if (ipi_param->usage != IMG_IPI_FRAME) { Should we check len before dereferencing the pointer? > + dev_dbg(&dip_dev->pdev->dev, > + "%s: recevied SCP_IPI_DIP ACK, ipi_param.usage(%d)\n", > + __func__, ipi_param->usage); Is this an expected situation? If not, perhaps we should at least print a warning here? > + return; > + } > + > + frameparam = (struct img_ipi_frameparam *)ipi_param->frm_param.va; Are we getting a kernel virtual address from the firmware here? That's a recipe for a disaster. What if there is a bug (or a security hole) there and the address ends up accidentally (or deliberately) pointing to some critical kernel data? We should get some kind of job identifier from the firmware and then try to find a matching request in our request list. Then any buffer addresses should be retrieved from the request struct itself. > + pipe_id = mtk_dip_pipe_get_pipe_from_job_id(frameparam->index); > + pipe = mtk_dip_dev_get_pipe(dip_dev, pipe_id); > + nit: The next line is directly related to previous, so no need for the blank line. > + if (!pipe) { > + dev_warn(&dip_dev->pdev->dev, > + "%s: get invalid img_ipi_frameparam index(%d) from firmware\n", > + __func__, frameparam->frame_no); > + return; > + } > + > + pipe_job_info = mtk_dip_pipe_get_running_job_info(pipe, > + frameparam->index); > + > + if (WARN_ONCE(!pipe_job_info, "%s: frame_no(%d) is lost\n", > + __func__, frameparam->frame_no)) > + return; > + > + req = mtk_dip_pipe_job_info_to_req(pipe_job_info); > + memcpy(&req->img_fparam.frameparam, frameparam, > + sizeof(req->img_fparam.frameparam)); > + num = atomic_dec_return(&dip_hw->num_composing); > + down(&dip_hw->sem); I think this should be up()? > + > + dev_dbg(&dip_dev->pdev->dev, > + "%s: frame_no(%d) is back, composing num(%d)\n", > + __func__, frameparam->frame_no, num); > + > + wake_up(&dip_dev->dip_hw.flushing_hw_wq); > + > + INIT_WORK(&req->mdp_work, dip_runner_func); > + ret = queue_work(dip_hw->mdp_wq, &req->mdp_work); > + if (!ret) { > + dev_dbg(&dip_dev->pdev->dev, > + "frame_no(%d) queue_work failed to mdp_wq: %d\n", > + frameparam->frame_no, ret); > + } It shouldn't be possible for this to fail given that it's a new request and the work was just initialized above. > +} > + > +static bool > +mtk_dip_hw_is_working_buf_allocated(struct mtk_dip_request *req) > +{ > + req->working_buf = > + mtk_dip_hw_working_buf_alloc(&req->dip_pipe->dip_dev->dip_hw); > + > + if (!req->working_buf) { > + dev_dbg(&req->dip_pipe->dip_dev->pdev->dev, > + "%s:%s:req(%p): no free working buffer available\n", > + __func__, req->dip_pipe->desc->name, req); > + return false; > + } > + > + return true; > +} > + > +static void dip_submit_worker(struct work_struct *work) Shouldn't this be called dip_composer_workfunc()? > +{ > + struct mtk_dip_request *req = mtk_dip_hw_fw_work_to_req(work); > + struct mtk_dip_hw *dip_hw = &req->dip_pipe->dip_dev->dip_hw; > + struct mtk_dip_dev *dip_dev = req->dip_pipe->dip_dev; > + struct img_ipi_param ipi_param; > + struct mtk_dip_hw_subframe *buf; > + int ret; > + > + dev_dbg(&dip_dev->pdev->dev, > + "%s: to send frame_no(%d),num(%d)\n", > + __func__, req->img_fparam.frameparam.frame_no, > + atomic_read(&dip_hw->num_composing)); > + > + wait_event_freezable(dip_hw->working_buf_wq, > + mtk_dip_hw_is_working_buf_allocated(req)); > + up(&dip_hw->sem); Shouldn't this be down_freezable()? The idea to use semaphores was to avoid such custom wait_event() calls like above. Basically the semaphore should be initialized with the total number of composer buffers and once down() is called that number of times, any further down() would block until some up() is called. > + > + dev_dbg(&dip_dev->pdev->dev, > + "%s: wakeup frame_no(%d),num(%d)\n", > + __func__, req->img_fparam.frameparam.frame_no, > + atomic_read(&dip_hw->num_composing)); > + > + buf = req->working_buf; > + mtk_dip_wbuf_to_ipi_img_addr(&req->img_fparam.frameparam.subfrm_data, > + &buf->buffer); > + memset(buf->buffer.vaddr, 0, DIP_SUB_FRM_SZ); > + mtk_dip_wbuf_to_ipi_img_sw_addr(&req->img_fparam.frameparam.config_data, > + &buf->config_data); > + memset(buf->config_data.vaddr, 0, DIP_COMP_SZ); > + > + if (!req->img_fparam.frameparam.tuning_data.present) { > + /* > + * When user enqueued without tuning buffer, > + * it would use driver internal buffer. > + */ > + dev_dbg(&dip_dev->pdev->dev, > + "%s: frame_no(%d) has no tuning_data\n", > + __func__, req->img_fparam.frameparam.frame_no); > + > + mtk_dip_wbuf_to_ipi_tuning_addr > + (&req->img_fparam.frameparam.tuning_data, > + &buf->tuning_buf); > + memset(buf->tuning_buf.vaddr, 0, DIP_TUNING_SZ); > + } > + > + req->img_fparam.frameparam.state = FRAME_STATE_COMPOSING; > + mtk_dip_wbuf_to_ipi_img_sw_addr(&req->img_fparam.frameparam.self_data, > + &buf->frameparam); > + memcpy(buf->frameparam.vaddr, &req->img_fparam.frameparam, > + sizeof(req->img_fparam.frameparam)); Is img_fparam really used at this stage? I can only see ipi_param passed to the IPI. > + > + ipi_param.usage = IMG_IPI_FRAME; > + mtk_dip_wbuf_to_ipi_img_sw_addr(&ipi_param.frm_param, > + &buf->frameparam); > + > + mutex_lock(&dip_hw->hw_op_lock); > + atomic_inc(&dip_hw->num_composing); Do we still need this num_composing counter once we have the semaphore? > + ret = scp_ipi_send(dip_hw->scp_pdev, SCP_IPI_DIP, &ipi_param, > + sizeof(ipi_param), 0); > + if (ret) > + dev_dbg(&dip_dev->pdev->dev, "%s: send SCP_IPI_DIP_FRAME failed %d\n", > + __func__, ret); This is an error, isn't it? We need to have proper error handling here, which at this stage would mean completing the request with buffers returned with ERROR state. > + mutex_unlock(&dip_hw->hw_op_lock); > + > + dev_dbg(&dip_dev->pdev->dev, > + "%s: frame_no(%d),idx(0x%x), composing num(%d)\n", > + __func__, req->img_fparam.frameparam.frame_no, > + req->img_fparam.frameparam.index, > + atomic_read(&dip_hw->num_composing)); > +} > + > +static int mtk_dip_hw_res_init(struct mtk_dip_hw *dip_hw) > +{ > + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); > + int ret; > + > + dip_hw->mdp_pdev = mdp_get_plat_device(dip_dev->pdev); > + if (!dip_hw->mdp_pdev) { > + dev_dbg(&dip_dev->pdev->dev, > + "%s: failed to get MDP device\n", > + __func__); > + return -EINVAL; > + } > + > + dip_hw->mdpcb_workqueue = > + alloc_ordered_workqueue("%s", > + __WQ_LEGACY | WQ_MEM_RECLAIM | > + WQ_FREEZABLE, > + "mdp_callback"); > + if (!dip_hw->mdpcb_workqueue) { > + dev_err(&dip_dev->pdev->dev, > + "%s: unable to alloc mdpcb workqueue\n", __func__); > + ret = -ENOMEM; > + goto destroy_mdpcb_wq; > + } > + > + dip_hw->composer_wq = > + alloc_ordered_workqueue("%s", > + __WQ_LEGACY | WQ_MEM_RECLAIM | > + WQ_FREEZABLE, > + "dip_composer"); > + if (!dip_hw->composer_wq) { > + dev_err(&dip_dev->pdev->dev, > + "%s: unable to alloc composer workqueue\n", __func__); > + ret = -ENOMEM; > + goto destroy_dip_composer_wq; > + } > + > + dip_hw->mdp_wq = > + alloc_ordered_workqueue("%s", > + __WQ_LEGACY | WQ_MEM_RECLAIM | > + WQ_FREEZABLE, > + "dip_runner"); > + if (!dip_hw->mdp_wq) { > + dev_err(&dip_dev->pdev->dev, > + "%s: unable to alloc dip_runner\n", __func__); > + ret = -ENOMEM; > + goto destroy_dip_runner_wq; > + } > + > + init_waitqueue_head(&dip_hw->flushing_wq); > + init_waitqueue_head(&dip_hw->flushing_hw_wq); nit: To avoid confusing workqueues with waitqueues, I'd suggest using _waitq suffix, which seems to be quite common in the kernel code. (And _workq or _workqueue for workqueues are not common at all.) > + > + return 0; > + > +destroy_dip_runner_wq: > + destroy_workqueue(dip_hw->mdp_wq); > + > +destroy_dip_composer_wq: > + destroy_workqueue(dip_hw->composer_wq); > + > +destroy_mdpcb_wq: > + destroy_workqueue(dip_hw->mdpcb_workqueue); Let's use consistent naming, i.e. mdpcb_wq. > + > + return ret; > +} > + > +static int mtk_dip_hw_res_release(struct mtk_dip_dev *dip_dev) > +{ > + flush_workqueue(dip_dev->dip_hw.mdp_wq); > + destroy_workqueue(dip_dev->dip_hw.mdp_wq); > + dip_dev->dip_hw.mdp_wq = NULL; > + > + flush_workqueue(dip_dev->dip_hw.mdpcb_workqueue); > + destroy_workqueue(dip_dev->dip_hw.mdpcb_workqueue); > + dip_dev->dip_hw.mdpcb_workqueue = NULL; > + > + flush_workqueue(dip_dev->dip_hw.composer_wq); > + destroy_workqueue(dip_dev->dip_hw.composer_wq); > + dip_dev->dip_hw.composer_wq = NULL; > + > + atomic_set(&dip_dev->dip_hw.num_composing, 0); > + atomic_set(&dip_dev->dip_hw.num_running, 0); > + atomic_set(&dip_dev->dip_hw.dip_enque_cnt, 0); > + > + return 0; > +} > + > +static bool mtk_dip_pipe_running_job_list_empty(struct mtk_dip_pipe *pipe, > + int *num) > +{ > + spin_lock(&pipe->job_lock); > + *num = pipe->num_jobs; We can just check list_empty(&pipe->pipe_job_running_list) here and remove pipe->num_jobs completely. > + spin_unlock(&pipe->job_lock); > + > + return !(*num); > +} > + > +static int mtk_dip_hw_flush_pipe_jobs(struct mtk_dip_pipe *pipe) > +{ > + int num; > + int ret = wait_event_freezable_timeout nit: Could we avoid mixing non-trivial code with declarations? > + (pipe->dip_dev->dip_hw.flushing_wq, > + mtk_dip_pipe_running_job_list_empty(pipe, &num), > + msecs_to_jiffies(DIP_FLUSHING_WQ_TIMEOUT)); We shouldn't wait here for all the jobs to complete, just those that are already queued to hardware. The stop operation should be as instant as possible. This should basically be done like this: - remove any pending jobs not queued to the hardware yet, - wait for the hardware to finish anything that can't be cancelled - possibly the same wait as done in mtk_dip_suspend(). > + > + if (!ret && num) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s: flushing is aborted, num(%d)\n", > + __func__, num); > + return -EINVAL; > + } > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s: wakeup num(%d)\n", __func__, num); > + return 0; > +} > + > +static int mtk_dip_hw_connect(struct mtk_dip_dev *dip_dev) > +{ > + int ret; > + struct img_ipi_param ipi_param; > + > + pm_runtime_get_sync(&dip_dev->pdev->dev); > + > + scp_ipi_register(dip_dev->dip_hw.scp_pdev, SCP_IPI_DIP, dip_scp_handler, > + dip_dev); > + memset(&ipi_param, 0, sizeof(ipi_param)); > + ipi_param.usage = IMG_IPI_INIT; > + ret = scp_ipi_send(dip_dev->dip_hw.scp_pdev, SCP_IPI_DIP, &ipi_param, > + sizeof(ipi_param), 200); > + if (ret) { > + dev_dbg(&dip_dev->pdev->dev, "%s: send SCP_IPI_DIP_FRAME failed %d\n", > + __func__, ret); > + return -EBUSY; > + } > + > + pm_runtime_put_autosuspend(&dip_dev->pdev->dev); > + > + ret = mtk_dip_hw_res_init(&dip_dev->dip_hw); There isn't anything in that function that couldn't be just done once in probe. Could we just move it there? > + if (ret) { > + dev_err(&dip_dev->pdev->dev, > + "%s: mtk_dip_hw_res_init failed(%d)\n", __func__, ret); > + > + return -EBUSY; > + } > + > + return 0; > +} > + > +static void mtk_dip_hw_disconnect(struct mtk_dip_dev *dip_dev) > +{ > + int ret; > + No need to send IMG_IPI_DEINIT? > + ret = mtk_dip_hw_res_release(dip_dev); > + if (ret) > + dev_err(&dip_dev->pdev->dev, > + "%s: mtk_dip_hw_res_release failed ret(%d)\n", > + __func__, ret); No need to call scp_ipi_unregister()? > +} > + > +int mtk_dip_hw_streamon(struct mtk_dip_pipe *pipe) > +{ > + struct mtk_dip_dev *dip_dev = pipe->dip_dev; > + int count, ret; > + > + mutex_lock(&dip_dev->dip_hw.hw_op_lock); > + count = atomic_read(&dip_dev->dip_hw.dip_stream_cnt); No need to use atomics if this is already protected with a mutex. > + if (!count) { > + ret = mtk_dip_hw_connect(pipe->dip_dev); > + if (ret) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s:%s: pipe(%d) connect to dip_hw failed\n", > + __func__, pipe->desc->name, pipe->desc->id); > + > + mutex_unlock(&dip_dev->dip_hw.hw_op_lock); > + > + return ret; > + } > + > + count = atomic_inc_return(&dip_dev->dip_hw.dip_stream_cnt); > + } > + mutex_unlock(&dip_dev->dip_hw.hw_op_lock); > + > + mutex_lock(&pipe->lock); > + pipe->streaming = 1; > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s: started stream, id(%d), stream cnt(%d)\n", > + __func__, pipe->desc->name, pipe->desc->id, count); > + mtk_dip_pipe_try_enqueue(pipe); > + mutex_unlock(&pipe->lock); > + > + return 0; > +} > + > +int mtk_dip_hw_streamoff(struct mtk_dip_pipe *pipe) > +{ > + struct mtk_dip_dev *dip_dev = pipe->dip_dev; > + struct mtk_dip_pipe_job_info *job_info; > + struct mtk_dip_pipe_job_info *tmp_job_info; > + s32 count; > + int ret; > + > + mutex_lock(&pipe->lock); Given that we end up calling this from mtk_dip_vb2_stop_streaming(), after the locking changes I suggested, this function will be called with this lock acquired already. > + dev_dbg(&dip_dev->pdev->dev, > + "%s:%s: streamoff, removing all running jobs\n", > + __func__, pipe->desc->name); > + > + spin_lock(&pipe->job_lock); The loop below is quite heavy weight as for something that runs under a spinlock (that by definition should only protect short critical sections). Could we just splice the list into a local list_head under the spinlock and then just iterate over the local list after releasing the spinlock? > + list_for_each_entry_safe(job_info, tmp_job_info, > + &pipe->pipe_job_running_list, list) { Don't we need to stop the hardware first? > + struct mtk_dip_request *req = > + mtk_dip_pipe_job_info_to_req(job_info); > + int i; > + > + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) { > + struct mtk_dip_dev_buffer *dev_buf = > + job_info->buf_map[i]; > + struct mtk_dip_video_device *node; > + > + if (!dev_buf) > + continue; > + > + node = mtk_dip_vbq_to_node > + (dev_buf->vbb.vb2_buf.vb2_queue); > + vb2_buffer_done(&dev_buf->vbb.vb2_buf, > + VB2_BUF_STATE_ERROR); > + dev_dbg(&dip_dev->pdev->dev, > + "%s:%s: return buf, idx(%d), state(%d)\n", > + pipe->desc->name, node->desc->name, > + dev_buf->vbb.vb2_buf.index, > + VB2_BUF_STATE_ERROR); > + } I can see that there is an existing mtk_dip_return_all_buffers() function that would return all the buffers of given video node when it's being stopped. How does this code interfere with that code? Actually, I'm not fully sure anymore what's the expected behavior here. I've asked on #v4l and will let you know once we figure out. > + > + pipe->num_jobs--; > + list_del(&job_info->list); We don't need to delete and decrement here. Just set to 0 and init list head after the loop. (The latter wouldn't be needed if we splice the list into a local list head.) > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s: not run job, id(%d), no(%d), state(%d), job cnt(%d)\n", > + __func__, pipe->desc->name, job_info->id, > + req->img_fparam.frameparam.frame_no, > + VB2_BUF_STATE_ERROR, pipe->num_jobs); > + } > + spin_unlock(&pipe->job_lock); > + > + ret = mtk_dip_hw_flush_pipe_jobs(pipe); > + if (WARN_ON(ret != 0)) { > + dev_err(&dip_dev->pdev->dev, > + "%s:%s: mtk_dip_hw_flush_pipe_jobs, ret(%d)\n", > + __func__, pipe->desc->name, ret); > + } I suppose this should be the very first thing to do in this function. > + > + pipe->streaming = 0; > + mutex_unlock(&pipe->lock); > + > + mutex_lock(&dip_dev->dip_hw.hw_op_lock); > + count = atomic_read(&dip_dev->dip_hw.dip_stream_cnt); > + if (count > 0 && atomic_dec_and_test(&dip_dev->dip_hw.dip_stream_cnt)) { It shouldn't be possible for count to be <= 0 at this point. Are you seeing cases like that when running the code? > + mtk_dip_hw_disconnect(dip_dev); > + > + dev_dbg(&dip_dev->pdev->dev, "%s: dip_hw disconnected, stream cnt(%d)\n", > + __func__, atomic_read(&dip_dev->dip_hw.dip_stream_cnt)); > + } > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s: stopped stream id(%d), stream cnt(%d)\n", > + __func__, pipe->desc->name, pipe->desc->id, count); > + > + mutex_unlock(&dip_dev->dip_hw.hw_op_lock); > + > + return 0; > +} > + > +void mtk_dip_hw_enqueue(struct mtk_dip_hw *dip_hw, > + struct mtk_dip_request *req) > +{ > + struct img_ipi_frameparam *frameparams = &req->img_fparam.frameparam; > + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); > + int ret; > + struct mtk_dip_dev_buffer **map = req->job_info.buf_map; > + > + /* > + * Workaround to pass v4l2 compliance test when it pass only one buffer > + * to DIP. The check is already done in request_validate(). > + */ > + if (!map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT] || > + (!map[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE] && > + !map[MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE])){ > + dev_dbg(&dip_dev->pdev->dev, > + "won't trigger hw job: raw(%p), mdp0(%p), mdp1(%p)\n", > + map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT], > + map[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE], > + map[MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE]); > + > + mtk_dip_pipe_job_finish(req->dip_pipe, req->job_info.id, > + VB2_BUF_STATE_DONE); > + return; > + } Please remove the workarounds. There is no value in passing the test if there is a workaround for it. If it keeps failing we at least know that we need to fix something. > + > + mtk_dip_pipe_ipi_params_config(req); > + frameparams->state = FRAME_STATE_INIT; > + frameparams->frame_no = atomic_inc_return(&dip_hw->dip_enque_cnt); typo: enqueue > + > + dev_dbg(&dip_dev->pdev->dev, > + "%s: hw job id(%d), frame_no(%d) into worklist\n", > + __func__, frameparams->index, frameparams->frame_no); > + > + INIT_WORK(&req->fw_work, dip_submit_worker); > + pm_runtime_get_sync(&dip_dev->pdev->dev); Aren't we still just only composing the job? Should we wait with this call until we actually queue the job to the ISP hardware? > + ret = queue_work(dip_hw->composer_wq, &req->fw_work); > + if (!ret) > + dev_dbg(&dip_dev->pdev->dev, > + "frame_no(%d) queue_work failed, already on a queue\n", > + frameparams->frame_no, ret); How is this possible? (I recall seeing this somewhere already. Was it the P1 driver?) > +} > diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c > new file mode 100644 > index 000000000000..7b454952566f > --- /dev/null > +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c > @@ -0,0 +1,1786 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2018 MediaTek Inc. > + * > + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > + * > + */ > + > +#include <linux/platform_device.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/platform_data/mtk_scp.h> > +#include <linux/pm_runtime.h> > +#include <linux/remoteproc.h> > +#include <linux/videodev2.h> > +#include <media/videobuf2-dma-contig.h> > +#include <media/v4l2-ioctl.h> > +#include <media/v4l2-subdev.h> > +#include <media/v4l2-event.h> > +#include "mtk_dip-dev.h" > +#include "mtk_dip-hw.h" > +#include "mtk-mdp3-regs.h" > + > +static int mtk_dip_subdev_open(struct v4l2_subdev *sd, > + struct v4l2_subdev_fh *fh) > +{ > + struct mtk_dip_pipe *pipe = mtk_dip_subdev_to_pipe(sd); > + > + dev_dbg(&pipe->dip_dev->pdev->dev, "%s:%s: pipe(%d) open\n", > + __func__, pipe->desc->name, pipe->desc->id); > + > + pipe->fh = fh; What is this needed for? > + > + return 0; > +} > + > +static int mtk_dip_subdev_close(struct v4l2_subdev *sd, > + struct v4l2_subdev_fh *fh) > +{ > + struct mtk_dip_pipe *pipe = mtk_dip_subdev_to_pipe(sd); > + > + dev_dbg(&pipe->dip_dev->pdev->dev, "%s:%s: pipe(%d) close\n", > + __func__, pipe->desc->name, pipe->desc->id); > + > + return 0; > +} Do we need to implement this? > + > +static int mtk_dip_subdev_s_stream(struct v4l2_subdev *sd, > + int enable) > +{ > + struct mtk_dip_pipe *pipe = mtk_dip_subdev_to_pipe(sd); > + int ret; > + > + if (enable) { > + ret = mtk_dip_hw_streamon(pipe); > + if (ret) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s:%s: pipe(%d) streamon failed\n", > + __func__, pipe->desc->name, pipe->desc->id); > + } CodingStyle: No brackets needed for only 1 statement. > + > + return ret; > + } nit: Since the 2 cases are symmetrical (as opposed to success and failure), I would put them in if/else. > + > + ret = mtk_dip_hw_streamoff(pipe); > + if (ret) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s:%s: pipe(%d) streamon off with errors\n", > + __func__, pipe->desc->name, pipe->desc->id); > + } CodingStyle: No brackets needed for only 1 statement. > + > + return ret; > +} > + > +static int mtk_dip_link_setup(struct media_entity *entity, > + const struct media_pad *local, > + const struct media_pad *remote, > + u32 flags) > +{ > + struct mtk_dip_pipe *pipe = > + container_of(entity, struct mtk_dip_pipe, subdev.entity); > + u32 pad = local->index; > + int count; > + > + WARN_ON(entity->obj_type != MEDIA_ENTITY_TYPE_V4L2_SUBDEV); > + WARN_ON(pad >= pipe->num_nodes); > + > + mutex_lock(&pipe->lock); > + if (!vb2_start_streaming_called(&pipe->nodes[pad].dev_q.vbq)) { > + int enable = flags & MEDIA_LNK_FL_ENABLED; > + int node_enabled = > + pipe->nodes[pad].flags & MEDIA_LNK_FL_ENABLED; > + > + if (enable && !node_enabled) > + atomic_inc_return(&pipe->cnt_nodes_not_streaming); > + > + if (!enable && node_enabled) > + atomic_dec_return(&pipe->cnt_nodes_not_streaming); Given that we need to acquire the big pipe mutex anyway, there is probably no need to be too smart here anyway. I suggested this method with counter with hope that we could simplify the locking, but apparently that didn't have such effect. Let's just make this simple: 1) serialize full link_setup, start_streaming and stop_streaming with pipe->lock, 2) keep two bitmasks, pipe->nodes_streaming and pipe->nodes_enabled, 3) use media_pipeline_start/stop() to lock the enabled state, as suggested in my comment for mtk_dip_vb2_start_streaming(), so that we don't need to think about streaming state here in this function. > + } > + pipe->nodes[pad].flags &= ~(MEDIA_LNK_FL_ENABLED); No need for the parentheses. > + pipe->nodes[pad].flags |= MEDIA_LNK_FL_ENABLED & flags; The typical convention is to have the constants on the right. > + count = atomic_read(&pipe->cnt_nodes_not_streaming); > + mutex_unlock(&pipe->lock); > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s: link setup, flags(0x%x), (%s)%d -->(%s)%d, cnt_nodes_ns(%d)\n", > + pipe->desc->name, flags, local->entity->name, local->index, > + remote->entity->name, remote->index, count); > + > + return 0; > +} > + > +static int mtk_dip_vb2_buf_prepare(struct vb2_buffer *vb) > +{ > + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vb->vb2_queue); > + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vb->vb2_queue); > + struct device *dev = &pipe->dip_dev->pdev->dev; > + const struct v4l2_format *fmt = &node->vdev_fmt; > + unsigned int size; > + int i; > + > + if (vb->vb2_queue->type == V4L2_BUF_TYPE_META_CAPTURE || > + vb->vb2_queue->type == V4L2_BUF_TYPE_META_OUTPUT){ > + if (vb->planes[0].length < fmt->fmt.meta.buffersize) { For OUTPUT we need to check bytesused and also it must be equal to the metadata size in that case. > + dev_dbg(dev, > + "%s:%s:%s: size error(user:%d, required:%d)\n", > + __func__, pipe->desc->name, node->desc->name, > + vb->planes[0].length, fmt->fmt.meta.buffersize); > + return -EINVAL; > + } else { > + return 0; > + } This comment will not apply anymore if we split to separate vb2 ops for meta queues, but normally one would put tis return 0 outside of the if block. > + } > + > + for (i = 0; i < vb->num_planes; i++) { > + size = fmt->fmt.pix_mp.plane_fmt[i].sizeimage; > + if (vb->planes[i].length < size) { > + dev_dbg(dev, > + "%s:%s:%s: size error(user:%d, max:%d)\n", > + __func__, pipe->desc->name, node->desc->name, > + vb->planes[i].length, size); > + return -EINVAL; > + } > + } > + > + return 0; > +} > + > +static int mtk_dip_vb2_buf_out_validate(struct vb2_buffer *vb) > +{ > + struct vb2_v4l2_buffer *v4l2_buf = to_vb2_v4l2_buffer(vb); > + > + if (v4l2_buf->field == V4L2_FIELD_ANY) > + v4l2_buf->field = V4L2_FIELD_NONE; > + > + if (v4l2_buf->field != V4L2_FIELD_NONE) > + return -EINVAL; > + > + return 0; > +} > + > +static int mtk_dip_vb2_queue_buf_init(struct vb2_buffer *vb) > +{ > + struct vb2_v4l2_buffer *b = to_vb2_v4l2_buffer(vb); > + struct mtk_dip_dev_buffer *dev_buf = mtk_dip_vb2_buf_to_dev_buf(vb); > + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vb->vb2_queue); > + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vb->vb2_queue); > + int i; > + > + for (i = 0; i < vb->num_planes; i++) { > + if (node->desc->smem_alloc) { Rather than having two completely different conditional blocks, could we have different vb2 ops for video and meta queues? > + void *cpu_addr; > + phys_addr_t buf_paddr; > + > + dev_buf->scp_daddr[i] = > + vb2_dma_contig_plane_dma_addr(vb, i); > + cpu_addr = vb2_plane_vaddr(vb, i); > + if (!cpu_addr) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s:%s: vb2_plane_vaddr NULL: s_daddr(%pad)\n", > + pipe->desc->name, node->desc->name, > + &dev_buf->scp_daddr[i]); > + return -EINVAL; > + } Why do we need cpu_addr here? It's not used any further. > + > + /* > + * We got the incorrect physical address mapped when > + * using dma_map_single() so I used dma_map_page_attrs() > + * directly to workaround here. Please see the detail in > + * mtk_dip-sys.c > + */ > + buf_paddr = dev_buf->scp_daddr[i]; > + dev_buf->isp_daddr[i] = > + dma_map_page_attrs(&pipe->dip_dev->pdev->dev, > + phys_to_page(buf_paddr), > + 0, vb->planes[i].length, > + DMA_BIDIRECTIONAL, Is it really bidirectional? I think this would depend on whether it's OUTPUT or CAPTURE. > + DMA_ATTR_SKIP_CPU_SYNC); > + if (dma_mapping_error(&pipe->dip_dev->pdev->dev, > + dev_buf->isp_daddr[i])) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s:%s: failed to map buffer: s_daddr(%pad)\n", > + pipe->desc->name, node->desc->name, > + &dev_buf->scp_daddr[i]); > + return -EINVAL; > + } > + } else { > + dev_buf->scp_daddr[i] = 0; > + dev_buf->isp_daddr[i] = > + vb2_dma_contig_plane_dma_addr(vb, i); > + } > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s: buf type(%d), idx(%d), mem(%d), p(%d) i_daddr(%pad), s_daddr(%pad)\n", > + pipe->desc->name, node->desc->name, b->vb2_buf.type, > + b->vb2_buf.index, b->vb2_buf.memory, i, > + &dev_buf->isp_daddr[i], &dev_buf->scp_daddr[i]); > + } > + > + return 0; > +} > + > +static void mtk_dip_vb2_queue_buf_cleanup(struct vb2_buffer *vb) > +{ > + struct mtk_dip_dev_buffer *dev_buf = mtk_dip_vb2_buf_to_dev_buf(vb); > + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vb->vb2_queue); > + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vb->vb2_queue); > + int i; > + > + if (!node->desc->smem_alloc) > + return; > + > + for (i = 0; i < vb->num_planes; i++) { > + if (node->desc->smem_alloc) This was already checked few lines above. > + dma_unmap_page_attrs(&pipe->dip_dev->pdev->dev, > + dev_buf->isp_daddr[i], > + vb->planes[i].length, > + DMA_BIDIRECTIONAL, > + DMA_ATTR_SKIP_CPU_SYNC); > + } > +} > + > +static void mtk_dip_vb2_buf_queue(struct vb2_buffer *vb) > +{ > + struct vb2_v4l2_buffer *b = to_vb2_v4l2_buffer(vb); > + struct mtk_dip_dev_buffer *dev_buf = mtk_dip_vb2_buf_to_dev_buf(vb); > + struct mtk_dip_request *req = (struct mtk_dip_request *)vb->request; > + struct mtk_dip_video_device *node = > + mtk_dip_vbq_to_node(vb->vb2_queue); > + int buf_count; > + > + dev_buf->fmt = node->vdev_fmt; > + dev_buf->dev_fmt = node->dev_q.dev_fmt; > + dev_buf->dma_port = node->desc->dma_port; > + dev_buf->rotation = node->dev_q.rotation; > + > + dev_dbg(&req->dip_pipe->dip_dev->pdev->dev, Sounds like it might be beneficial to have a local variable for dip_dev. > + "%s:%s: buf type(%d), idx(%d), mem(%d), i_daddr(%pad), s_daddr(%pad)\n", > + req->dip_pipe->desc->name, node->desc->name, b->vb2_buf.type, > + b->vb2_buf.index, b->vb2_buf.memory, &dev_buf->isp_daddr, > + &dev_buf->scp_daddr); > + > + spin_lock(&node->buf_list_lock); > + list_add_tail(&dev_buf->list, &node->buf_list); > + spin_unlock(&node->buf_list_lock); > + > + buf_count = atomic_dec_return(&req->buf_count); > + if (!buf_count) { > + mutex_lock(&req->dip_pipe->lock); > + mtk_dip_pipe_try_enqueue(req->dip_pipe); > + mutex_unlock(&req->dip_pipe->lock); > + } > + > + dev_dbg(&req->dip_pipe->dip_dev->pdev->dev, > + "%s:%s:%s:%s:buf_count(%d)\n", > + __func__, req->dip_pipe->desc->name, node->desc->name, > + req->req.debug_str, buf_count); > +} > + > +static int mtk_dip_vb2_queue_setup(struct vb2_queue *vq, > + unsigned int *num_buffers, > + unsigned int *num_planes, > + unsigned int sizes[], > + struct device *alloc_devs[]) > +{ > + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vq); > + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vq); > + const struct v4l2_format *fmt = &node->vdev_fmt; > + unsigned int size; > + int i; > + > + vq->dma_attrs |= DMA_ATTR_NON_CONSISTENT; Please keep this a downstream patch added on top of the driver patches. > + > + if (!*num_planes) { > + *num_planes = 1; > + sizes[0] = fmt->fmt.pix_mp.plane_fmt[0].sizeimage; > + } > + > + if (node->desc->id == MTK_DIP_VIDEO_NODE_ID_TUNING_OUT) { > + int max_meta_bufs_per_pipe; > + > + size = fmt->fmt.meta.buffersize; > + max_meta_bufs_per_pipe = > + MTK_DIP_DEV_META_BUF_POOL_MAX_SIZE / > + round_up(size, PAGE_SIZE) / MTK_DIP_PIPE_ID_TOTAL_NUM; > + *num_buffers = clamp_val(*num_buffers, 1, > + max_meta_bufs_per_pipe); > + sizes[0] = size; > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s:%s: n_p(%d), n_b(%d), s[%d](%u)\n", > + __func__, pipe->desc->name, node->desc->name, > + *num_planes, *num_buffers, 0, sizes[0]); > + nit: Stray blank line. > + } else { > + for (i = 0; i < *num_planes; i++) { > + if (sizes[i] < fmt->fmt.pix_mp.plane_fmt[i].sizeimage) { > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s:%s: invalid buf: %u < %u\n", > + __func__, pipe->desc->name, > + node->desc->name, sizes[0], size); > + return -EINVAL; > + } > + sizes[i] = fmt->fmt.pix_mp.plane_fmt[i].sizeimage; For VIDIOC_CREATEBUFS we also need to handle the case when *num_planes > 0 and then we need to honor the values already present in sizes[]. (Note that the code above overrides *num_planes to 1, so we lose the information. The code needs to be restructured to handle that.) > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s:%s: n_p(%d), n_b(%d), s[%d](%u)\n", > + __func__, pipe->desc->name, node->desc->name, > + *num_planes, *num_buffers, i, sizes[i]); > + } > + } > + > + return 0; > +} > + > +static void mtk_dip_return_all_buffers(struct mtk_dip_pipe *pipe, > + struct mtk_dip_video_device *node, > + enum vb2_buffer_state state) > +{ > + struct mtk_dip_dev_buffer *b, *b0; > + > + spin_lock(&node->buf_list_lock); > + list_for_each_entry_safe(b, b0, &node->buf_list, list) { > + list_del(&b->list); > + if (b->vbb.vb2_buf.state == VB2_BUF_STATE_ACTIVE) Are you seeing some buffers with state other than ACTIVE here? If so, that's a bug somewhere else in the driver, which needs to be fixed. This check shouldn't be here. > + vb2_buffer_done(&b->vbb.vb2_buf, state); > + } > + spin_unlock(&node->buf_list_lock); > +} > + > +static int mtk_dip_vb2_start_streaming(struct vb2_queue *vq, unsigned int count) > +{ > + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vq); > + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vq); > + int cnt_node_ns; > + int ret; > + > + if (!(node->flags & MEDIA_LNK_FL_ENABLED)) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s:%s: stream on failed, node is not enabled\n", > + pipe->desc->name, node->desc->name); > + > + ret = -ENOLINK; > + goto fail_return_bufs; > + } > + > + mutex_lock(&pipe->lock); > + cnt_node_ns = atomic_dec_return(&pipe->cnt_nodes_not_streaming); > + mutex_unlock(&pipe->lock); This still isn't really synchronized. One could disable the link at this point. I believe that in the previous round of the review I suggested checking the enable state after calling media_pipeline_start(), because it locks the enable status for links that don't have the DYNAMIC flag. That would solve the problem. > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s:%s cnt_nodes_not_streaming(%d)\n", > + __func__, pipe->desc->name, node->desc->name, cnt_node_ns); > + > + if (cnt_node_ns) > + return 0; > + > + ret = media_pipeline_start(&node->vdev.entity, &pipe->pipeline); > + if (ret < 0) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s:%s: media_pipeline_start failed(%d)\n", > + pipe->desc->name, node->desc->name, ret); > + > + goto fail_return_bufs; > + } > + > + /* Start streaming of the whole pipeline */ > + ret = v4l2_subdev_call(&pipe->subdev, video, s_stream, 1); > + if (ret < 0) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s:%s: sub dev s_stream(1) failed(%d)\n", > + pipe->desc->name, node->desc->name, ret); > + > + goto fail_stop_pipeline; > + } > + > + return 0; > + > +fail_stop_pipeline: > + media_pipeline_stop(&node->vdev.entity); > + > +fail_return_bufs: > + mtk_dip_return_all_buffers(pipe, node, VB2_BUF_STATE_QUEUED); > + > + return ret; > +} > + > +static void mtk_dip_vb2_stop_streaming(struct vb2_queue *vq) > +{ > + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vq); > + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vq); > + int ret; > + int count; > + int is_pipe_streamon; > + > + WARN_ON(!(node->flags & MEDIA_LNK_FL_ENABLED)); > + > + mutex_lock(&pipe->lock); > + count = atomic_inc_return(&pipe->cnt_nodes_not_streaming); > + is_pipe_streamon = pipe->streaming; > + mutex_unlock(&pipe->lock); > + We protect the access to pipe->streaming with the mutex above, but do we have any guarantee that after we release the mutex the value doesn't change? We should likely do the whole stop operation holding the pipe lock. > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s:%s cnt_nodes_not_streaming(%d), is_pipe_streamon(%d)\n", > + __func__, pipe->desc->name, node->desc->name, count, > + is_pipe_streamon); > + > + if (count && is_pipe_streamon) { For v4l2_subdev_call() shouldn't this be !count && is_pipe_streamon? > + ret = v4l2_subdev_call(&pipe->subdev, video, s_stream, 0); > + if (ret) > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s:%s: sub dev s_stream(0) failed(%d)\n", > + pipe->desc->name, node->desc->name, ret); > + media_pipeline_stop(&node->vdev.entity); We should do this one when the last node stops streaming to solve the enable state locking issue as described in my comment to _start_streaming(). > + } > + > + mtk_dip_return_all_buffers(pipe, node, VB2_BUF_STATE_ERROR); > +} > + > +static int mtk_dip_videoc_querycap(struct file *file, void *fh, > + struct v4l2_capability *cap) > +{ > + struct mtk_dip_pipe *pipe = video_drvdata(file); > + > + strlcpy(cap->driver, pipe->desc->name, > + sizeof(cap->driver)); > + strlcpy(cap->card, pipe->desc->name, > + sizeof(cap->card)); > + snprintf(cap->bus_info, sizeof(cap->bus_info), > + "platform:%s", dev_name(pipe->dip_dev->mdev.dev)); > + > + return 0; > +} > + > +static int mtk_dip_videoc_try_fmt(struct file *file, void *fh, > + struct v4l2_format *f) I don't see this function returning any error codes. Please make it void. > +{ > + struct mtk_dip_pipe *pipe = video_drvdata(file); > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > + const struct mtk_dip_dev_format *dev_fmt; > + struct v4l2_format try_fmt; > + > + memset(&try_fmt, 0, sizeof(try_fmt)); > + try_fmt.type = node->dev_q.vbq.type; This should come from f.type and should have been already validated by the core. Actually, why don't we use f directly? > + dev_fmt = mtk_dip_pipe_find_fmt(pipe, node, > + f->fmt.pix_mp.pixelformat); > + > + if (!dev_fmt) { > + dev_fmt = &node->desc->fmts[node->desc->default_fmt_idx]; > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s:%s: dev_fmt(%d) not found, use default(%d)\n", > + __func__, pipe->desc->name, node->desc->name, > + f->fmt.pix_mp.pixelformat, dev_fmt->format); > + } > + > + if (V4L2_TYPE_IS_OUTPUT(node->desc->buf_type)) { > + try_fmt.fmt.pix_mp.width = clamp_val(f->fmt.pix_mp.width, > + MTK_DIP_OUTPUT_MIN_WIDTH, > + MTK_DIP_OUTPUT_MAX_WIDTH); > + try_fmt.fmt.pix_mp.height = > + clamp_val(f->fmt.pix_mp.height, > + MTK_DIP_OUTPUT_MIN_HEIGHT, > + MTK_DIP_OUTPUT_MAX_HEIGHT); > + } else { > + try_fmt.fmt.pix_mp.width = clamp_val(f->fmt.pix_mp.width, > + MTK_DIP_CAPTURE_MIN_WIDTH, > + MTK_DIP_CAPTURE_MAX_WIDTH); > + try_fmt.fmt.pix_mp.height = > + clamp_val(f->fmt.pix_mp.height, > + MTK_DIP_CAPTURE_MIN_HEIGHT, > + MTK_DIP_CAPTURE_MAX_HEIGHT); > + } We have these limits already as a part of the frmsizeenum field of the mtk_dip_video_device_desc struct. Could we just use that and remove the conditional handling? > + > + node->dev_q.dev_fmt = dev_fmt; Why are we changing the format on the node inside TRY_FMT? > + try_fmt.fmt.pix_mp.field = V4L2_FIELD_NONE; > + mtk_dip_pipe_set_img_fmt(pipe, node, &try_fmt.fmt.pix_mp, dev_fmt); > + > + *f = try_fmt; > + > + return 0; > +} > + > +static int mtk_dip_videoc_g_fmt(struct file *file, void *fh, > + struct v4l2_format *f) > +{ > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > + > + *f = node->vdev_fmt; > + > + return 0; > +} > + > +static int mtk_dip_videoc_s_fmt(struct file *file, void *fh, > + struct v4l2_format *f) > +{ > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > + struct mtk_dip_pipe *pipe = video_drvdata(file); > + int ret; > + > + if (pipe->streaming) > + return -EBUSY; We should use vb2_is_busy() here, because it's not allowed to change formats after allocating buffers. > + > + ret = mtk_dip_videoc_try_fmt(file, fh, f); > + if (!ret) > + node->vdev_fmt = *f; > + > + return ret; > +} > + > +static int mtk_dip_videoc_enum_framesizes(struct file *file, void *priv, > + struct v4l2_frmsizeenum *sizes) > +{ > + struct mtk_dip_pipe *pipe = video_drvdata(file); > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > + const struct mtk_dip_dev_format *dev_fmt; > + > + dev_fmt = mtk_dip_pipe_find_fmt(pipe, node, sizes->pixel_format); > + > + if (!dev_fmt || sizes->index) > + return -EINVAL; > + > + sizes->type = node->desc->frmsizeenum->type; > + sizes->stepwise.max_width = > + node->desc->frmsizeenum->stepwise.max_width; > + sizes->stepwise.min_width = > + node->desc->frmsizeenum->stepwise.min_width; > + sizes->stepwise.max_height = > + node->desc->frmsizeenum->stepwise.max_height; > + sizes->stepwise.min_height = > + node->desc->frmsizeenum->stepwise.min_height; > + sizes->stepwise.step_height = > + node->desc->frmsizeenum->stepwise.step_height; > + sizes->stepwise.step_width = > + node->desc->frmsizeenum->stepwise.step_width; > + > + return 0; > +} > + > +static int mtk_dip_videoc_enum_fmt(struct file *file, void *fh, > + struct v4l2_fmtdesc *f) > +{ > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > + > + if (f->index >= node->desc->num_fmts) > + return -EINVAL; > + > + strscpy(f->description, node->desc->description, > + sizeof(f->description)); > + f->pixelformat = node->desc->fmts[f->index].format; > + f->flags = 0; > + > + return 0; > +} > + > +static int mtk_dip_meta_enum_format(struct file *file, void *fh, > + struct v4l2_fmtdesc *f) > +{ > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > + > + if (f->index > 0) > + return -EINVAL; > + > + strscpy(f->description, node->desc->description, > + sizeof(f->description)); > + > + f->pixelformat = node->vdev_fmt.fmt.meta.dataformat; > + f->flags = 0; > + > + return 0; > +} > + > +static int mtk_dip_videoc_g_meta_fmt(struct file *file, void *fh, > + struct v4l2_format *f) > +{ > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > + *f = node->vdev_fmt; > + > + return 0; > +} > + > +static int handle_buf_rotate_config(struct v4l2_ctrl *ctrl) > +{ > + struct mtk_dip_video_device *node = > + container_of(ctrl->handler, struct mtk_dip_video_device, > + ctrl_handler); > + > + if (ctrl->val != 0 && ctrl->val != 90 && > + ctrl->val != 180 && ctrl->val != 270) { > + pr_err("%s: Invalid buffer rotation %d", node->desc->name, > + ctrl->val); > + return -EINVAL; > + } There is no need to check this here, because the framework already ensures the values are valid. > + > + node->dev_q.rotation = ctrl->val; Given the above, this could be just put directly into mtk_dip_video_device_s_ctrl(). > + > + return 0; > +} > + > +static int mtk_dip_video_device_s_ctrl(struct v4l2_ctrl *ctrl) > +{ > + int ret = 0; > + > + switch (ctrl->id) { > + case V4L2_CID_ROTATE: > + ret = handle_buf_rotate_config(ctrl); nit: We can just return directly from here. > + break; > + default: > + break; There should be no need to handle default here, as the control framework will not call us with any settable controls we haven't explicitly registered. > + } > + > + return ret; > +} > + > +/******************** function pointers ********************/ > + > +static const struct v4l2_subdev_internal_ops mtk_dip_subdev_internal_ops = { > + .open = mtk_dip_subdev_open, > + .close = mtk_dip_subdev_close, > +}; > + > +static const struct v4l2_subdev_video_ops mtk_dip_subdev_video_ops = { > + .s_stream = mtk_dip_subdev_s_stream, > +}; > + > +static const struct v4l2_subdev_ops mtk_dip_subdev_ops = { > + .video = &mtk_dip_subdev_video_ops, > +}; > + > +static const struct media_entity_operations mtk_dip_media_ops = { > + .link_setup = mtk_dip_link_setup, > + .link_validate = v4l2_subdev_link_validate, > +}; > + > +static struct media_request *mtk_dip_request_alloc(struct media_device *mdev) > +{ > + return kzalloc(sizeof(struct mtk_dip_request), GFP_KERNEL); That's potentially error-prone. I'd add a properly typed local variable, let's say mtk_req, allocate with sizeof(*mtk_req) and then return &mtk_dev->req. > +} > + > +static void mtk_dip_request_free(struct media_request *req) > +{ A similar comment her. Please retrieve mtk_dip_request pointer properly using a helper (with container_of() inside) to a local variable and then free it. > + kfree(req); > +} > + > +static int mtk_dip_vb2_request_validate(struct media_request *req) > +{ > + struct media_request_object *obj; > + struct mtk_dip_dev *dip_dev = mtk_dip_mdev_to_dev(req->mdev); > + struct mtk_dip_request *dip_req = (struct mtk_dip_request *)req; Please avoid such direct casts and use properly typed helpers instead, using container_of() if needed. > + struct mtk_dip_pipe *pipe = NULL; > + struct mtk_dip_pipe *pipe_prev = NULL; > + struct mtk_dip_dev_buffer **map = dip_req->job_info.buf_map; > + int buf_count = 0; > + > + memset(map, 0, sizeof(dip_req->job_info.buf_map)); > + > + list_for_each_entry(obj, &req->objects, list) { > + struct vb2_buffer *vb; > + struct mtk_dip_dev_buffer *dev_buf; > + struct mtk_dip_video_device *node; > + > + if (!vb2_request_object_is_buffer(obj)) > + continue; > + > + vb = container_of(obj, struct vb2_buffer, req_obj); > + node = mtk_dip_vbq_to_node(vb->vb2_queue); > + pipe = vb2_get_drv_priv(vb->vb2_queue); > + if (pipe_prev && pipe != pipe_prev) { > + dev_warn(&dip_dev->pdev->dev, > + "%s:%s:%s:found buf of different pipes(%p,%p)\n", > + __func__, node->desc->name, > + req->debug_str, pipe, pipe_prev); Userspace misbehavior should not trigger kernel warnings. Please make this dev_dbg(). > + return -EINVAL; > + } > + > + pipe_prev = pipe; > + dev_buf = mtk_dip_vb2_buf_to_dev_buf(vb); > + dip_req->job_info.buf_map[node->desc->id] = dev_buf; > + buf_count++; > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s: added buf(%p) to pipe-job(%p), buf_count(%d)\n", > + pipe->desc->name, node->desc->name, dev_buf, > + dip_req->job_info, buf_count); > + } > + > + if (!pipe) { > + dev_warn(&dip_dev->pdev->dev, > + "%s: no buffer in the request(%p)\n", > + req->debug_str, req); > + > + return vb2_request_validate(req); Shouldn't this be an error? > + } > + > + /* > + * Workaround to pass V4L2 comliance test since it can't know > + * which buffer is required and may enqueue only 1 buffer. > + * It seems that we should return an error here and let the > + * user to enqueue required buffer instead of showing a debug > + * message only. > + */ > + if (!map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT] || > + (!map[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE] && > + !map[MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE])) > + dev_dbg(&dip_dev->pdev->dev, > + "won't trigger hw job: raw(%p), mdp0(%p), mdp1(%p)\n", > + map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT], > + map[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE], > + map[MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE]); > + > + atomic_set(&dip_req->buf_count, buf_count); > + dip_req->job_info.id = mtk_dip_pipe_next_job_id(pipe); > + dip_req->dip_pipe = pipe; > + mtk_dip_pipe_debug_job(pipe, &dip_req->job_info); > + > + spin_lock(&pipe->job_lock); > + list_add_tail(&dip_req->job_info.list, &pipe->pipe_job_pending_list); > + pipe->num_pending_jobs++; .req_validate() must not change any driver state (e.g. internal queues). It should only validate the request itself. The proper place do to this is .req_queue(). > + dev_dbg(&dip_dev->pdev->dev, > + "%s:%s: current num of pending jobs(%d)\n", > + __func__, pipe->desc->name, pipe->num_pending_jobs); > + spin_unlock(&pipe->job_lock); > + > + return vb2_request_validate(req); > +} > + > +static const struct media_device_ops mtk_dip_media_req_ops = { > + .req_validate = mtk_dip_vb2_request_validate, > + .req_queue = vb2_request_queue, > + .req_alloc = mtk_dip_request_alloc, > + .req_free = mtk_dip_request_free, > +}; > + > +static const struct v4l2_ctrl_ops mtk_dip_video_device_ctrl_ops = { > + .s_ctrl = mtk_dip_video_device_s_ctrl, > +}; > + > +static const struct vb2_ops mtk_dip_vb2_ops = { > + .buf_queue = mtk_dip_vb2_buf_queue, > + .queue_setup = mtk_dip_vb2_queue_setup, > + .buf_init = mtk_dip_vb2_queue_buf_init, > + .buf_prepare = mtk_dip_vb2_buf_prepare, > + .buf_out_validate = mtk_dip_vb2_buf_out_validate, > + .buf_cleanup = mtk_dip_vb2_queue_buf_cleanup, > + .start_streaming = mtk_dip_vb2_start_streaming, > + .stop_streaming = mtk_dip_vb2_stop_streaming, > + .wait_prepare = vb2_ops_wait_prepare, > + .wait_finish = vb2_ops_wait_finish, > +}; > + > +static const struct v4l2_file_operations mtk_dip_v4l2_fops = { > + .unlocked_ioctl = video_ioctl2, > + .open = v4l2_fh_open, > + .release = vb2_fop_release, > + .poll = vb2_fop_poll, > + .mmap = vb2_fop_mmap, > +#ifdef CONFIG_COMPAT > + .compat_ioctl32 = v4l2_compat_ioctl32, > +#endif > +}; > + > +int mtk_dip_dev_media_register(struct device *dev, > + struct media_device *media_dev, > + const char *model) > +{ > + int ret; > + > + media_dev->dev = dev; > + strlcpy(media_dev->model, model, sizeof(media_dev->model)); Could we just use dev_driver_string() instead? > + snprintf(media_dev->bus_info, sizeof(media_dev->bus_info), > + "platform:%s", dev_name(dev)); > + media_dev->hw_revision = 0; > + media_dev->ops = &mtk_dip_media_req_ops; > + media_device_init(media_dev); > + > + ret = media_device_register(media_dev); > + if (ret) { > + dev_err(dev, "failed to register media device (%d)\n", ret); > + media_device_unregister(media_dev); > + media_device_cleanup(media_dev); Please return from here to make it clear which code is for failure and which for success. > + } > + > + dev_dbg(dev, "Registered media device: %s, %p", media_dev->model, > + media_dev); > + > + return ret; And return 0 here. > +} > + > +int mtk_dip_dev_v4l2_register(struct device *dev, > + struct media_device *media_dev, > + struct v4l2_device *v4l2_dev) > +{ > + int ret; > + > + v4l2_dev->mdev = media_dev; > + v4l2_dev->ctrl_handler = NULL; > + > + ret = v4l2_device_register(dev, v4l2_dev); > + if (ret) { > + dev_err(dev, "failed to register V4L2 device (%d)\n", ret); > + v4l2_device_unregister(v4l2_dev); > + } > + > + dev_dbg(dev, "Registered v4l2 device: %p", v4l2_dev); > + > + return ret; > +} There is only 1 function call inside of this function, so there is not much point in having a separate function for this. Please just move back to the caller. > + > +static int mtk_dip_video_device_v4l2_register(struct mtk_dip_pipe *pipe, > + struct mtk_dip_video_device *node) > +{ > + struct vb2_queue *vbq = &node->dev_q.vbq; > + struct video_device *vdev = &node->vdev; > + struct media_link *link; > + int ret; > + > + /* Initialize miscellaneous variables */ I'd remove comments like this, because this is obvious from reading the code alone. > + mutex_init(&node->dev_q.lock); > + > + /* Initialize formats to default values */ > + vdev->device_caps = node->desc->cap; > + vdev->ioctl_ops = node->desc->ops; > + node->vdev_fmt.type = node->desc->buf_type; > + mtk_dip_pipe_load_default_fmt(pipe, node, &node->vdev_fmt); > + > + /* Initialize media entities */ > + ret = media_entity_pads_init(&vdev->entity, 1, &node->vdev_pad); > + if (ret) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "failed initialize media entity (%d)\n", ret); > + goto err_mutex_destroy; > + } > + > + node->vdev_pad.flags = V4L2_TYPE_IS_OUTPUT(node->desc->buf_type) ? > + MEDIA_PAD_FL_SOURCE : MEDIA_PAD_FL_SINK; > + > + /* Initialize vbq */ > + vbq->type = node->vdev_fmt.type; > + vbq->io_modes = VB2_MMAP | VB2_DMABUF; > + vbq->ops = &mtk_dip_vb2_ops; > + vbq->mem_ops = &vb2_dma_contig_memops; > + vbq->supports_requests = true; > + vbq->buf_struct_size = sizeof(struct mtk_dip_dev_buffer); > + vbq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; This is a memory to memory device so this should be TIMESTAMP_COPY and the driver should copy the time stamp from the input frame buffer to the output buffers. > + vbq->min_buffers_needed = 0; > + vbq->drv_priv = pipe; > + vbq->lock = &node->dev_q.lock; > + > + ret = vb2_queue_init(vbq); > + if (ret) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s:%s:%s: failed to init vb2 queue(%d)\n", > + __func__, pipe->desc->name, node->desc->name, > + ret); > + goto err_media_entity_cleanup; > + } > + > + /* Initialize vdev */ > + snprintf(vdev->name, sizeof(vdev->name), "%s %s", pipe->desc->name, > + node->desc->name); > + vdev->entity.name = vdev->name; > + vdev->entity.function = MEDIA_ENT_F_IO_V4L; > + vdev->entity.ops = NULL; > + vdev->release = video_device_release_empty; > + vdev->fops = &mtk_dip_v4l2_fops; > + vdev->lock = &node->dev_q.lock; > + vdev->ctrl_handler = &node->ctrl_handler; > + vdev->v4l2_dev = &pipe->dip_dev->v4l2_dev; > + vdev->queue = &node->dev_q.vbq; > + vdev->vfl_dir = V4L2_TYPE_IS_OUTPUT(node->desc->buf_type) ? > + VFL_DIR_TX : VFL_DIR_RX; > + > + if (node->desc->smem_alloc) { > + vdev->queue->dev = &pipe->dip_dev->dip_hw.scp_pdev->dev; > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s: select smem_vb2_alloc_ctx(%p)\n", > + pipe->desc->name, node->desc->name, > + vdev->queue->dev); > + } else { > + vdev->queue->dev = &pipe->dip_dev->pdev->dev; > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "%s:%s: select default_vb2_alloc_ctx(%p)\n", > + pipe->desc->name, node->desc->name, > + &pipe->dip_dev->pdev->dev); > + } > + > + video_set_drvdata(vdev, pipe); > + > + ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); > + if (ret) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "failed to register video device (%d)\n", ret); > + goto err_vb2_queue_release; > + } > + dev_dbg(&pipe->dip_dev->pdev->dev, "registered vdev: %s\n", > + vdev->name); > + > + /* Create link between video node and the subdev pad */ > + if (V4L2_TYPE_IS_OUTPUT(node->desc->buf_type)) > + ret = media_create_pad_link(&vdev->entity, 0, > + &pipe->subdev.entity, > + node->desc->id, node->flags); > + else > + ret = media_create_pad_link(&pipe->subdev.entity, > + node->desc->id, &vdev->entity, > + 0, node->flags); > + if (ret) > + goto err_video_unregister_device; > + > + vdev->intf_devnode = media_devnode_create(&pipe->dip_dev->mdev, > + MEDIA_INTF_T_V4L_VIDEO, 0, > + VIDEO_MAJOR, vdev->minor); > + if (!vdev->intf_devnode) { > + ret = -ENOMEM; > + goto err_rm_links; > + } > + > + link = media_create_intf_link(&vdev->entity, > + &vdev->intf_devnode->intf, > + node->flags); > + if (!link) { > + ret = -ENOMEM; > + goto err_rm_devnode; > + } > + > + return 0; > + > +err_rm_devnode: > + media_devnode_remove(vdev->intf_devnode); > + > +err_rm_links: > + media_entity_remove_links(&vdev->entity); > + > +err_video_unregister_device: > + video_unregister_device(vdev); > + > +err_vb2_queue_release: > + vb2_queue_release(&node->dev_q.vbq); > + > +err_media_entity_cleanup: > + media_entity_cleanup(&node->vdev.entity); > + > +err_mutex_destroy: > + mutex_destroy(&node->dev_q.lock); > + > + return ret; > +} > + > +static int mtk_dip_pipe_v4l2_ctrl_init(struct mtk_dip_pipe *dip_pipe) > +{ > + struct mtk_dip_video_device *node; > + int i; > + > + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) > + v4l2_ctrl_handler_init(&dip_pipe->nodes[i].ctrl_handler, > + V4L2_CID_MTK_DIP_MAX); Do we need to init the handler for nodes that don't expose any controls? > + > + /* Only MDP 0 support rotate in MT8183 */ > + node = &dip_pipe->nodes[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE]; > + if (v4l2_ctrl_new_std(&node->ctrl_handler, > + &mtk_dip_video_device_ctrl_ops, > + V4L2_CID_ROTATE, 0, 270, 90, 0) == NULL) { > + dev_err(&dip_pipe->dip_dev->pdev->dev, > + "%s create rotate ctrl failed:(%d)", > + node->desc->name, node->ctrl_handler.error); > + > + return -EPROBE_DEFER; Why defer here? Isn't this just a critical error? Also, the proper way to check for control registration error is to check the control handler error rather than the control pointer. An example registration code: https://elixir.bootlin.com/linux/v5.3-rc2/source/drivers/media/platform/qcom/venus/vdec_ctrls.c#L79 > + } > + > + return 0; > +} > + > +static void mtk_dip_pipe_v4l2_ctrl_release(struct mtk_dip_pipe *dip_pipe) > +{ > + int i; > + > + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) > + v4l2_ctrl_handler_free(&dip_pipe->nodes[i].ctrl_handler); > +} > + > +int mtk_dip_pipe_v4l2_register(struct mtk_dip_pipe *pipe, > + struct media_device *media_dev, > + struct v4l2_device *v4l2_dev) > +{ > + int i, ret; > + > + ret = mtk_dip_pipe_v4l2_ctrl_init(pipe); > + if (ret) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "%s: failed(%d) to initialize ctrls\n", > + pipe->desc->name, ret); > + > + return ret; > + } > + > + pipe->streaming = 0; > + > + /* Initialize subdev media entity */ > + pipe->subdev_pads = devm_kcalloc(&pipe->dip_dev->pdev->dev, > + pipe->num_nodes, > + sizeof(*pipe->subdev_pads), > + GFP_KERNEL); > + if (!pipe->subdev_pads) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "failed to alloc pipe->subdev_pads (%d)\n", ret); > + ret = -ENOMEM; > + goto err_release_ctrl; > + } > + ret = media_entity_pads_init(&pipe->subdev.entity, > + pipe->num_nodes, > + pipe->subdev_pads); > + if (ret) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "failed initialize subdev media entity (%d)\n", ret); > + goto err_free_subdev_pads; > + } > + > + /* Initialize subdev */ > + v4l2_subdev_init(&pipe->subdev, &mtk_dip_subdev_ops); > + > + pipe->subdev.entity.function = > + MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER; > + pipe->subdev.entity.ops = &mtk_dip_media_ops; > + pipe->subdev.flags = > + V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; > + pipe->subdev.ctrl_handler = NULL; > + pipe->subdev.internal_ops = &mtk_dip_subdev_internal_ops; > + > + for (i = 0; i < pipe->num_nodes; i++) > + pipe->subdev_pads[i].flags = > + V4L2_TYPE_IS_OUTPUT(pipe->nodes[i].desc->buf_type) ? > + MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE; Isn't this the other way around? > + > + snprintf(pipe->subdev.name, sizeof(pipe->subdev.name), > + "%s", pipe->desc->name); > + v4l2_set_subdevdata(&pipe->subdev, pipe); > + > + ret = v4l2_device_register_subdev(&pipe->dip_dev->v4l2_dev, > + &pipe->subdev); > + if (ret) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "failed initialize subdev (%d)\n", ret); > + goto err_media_entity_cleanup; > + } > + > + dev_dbg(&pipe->dip_dev->pdev->dev, > + "register subdev: %s, ctrl_handler %p\n", > + pipe->subdev.name, pipe->subdev.ctrl_handler); > + > + ret = v4l2_device_register_subdev_nodes(&pipe->dip_dev->v4l2_dev); > + if (ret) { > + dev_err(&pipe->dip_dev->pdev->dev, > + "failed to register subdevs (%d)\n", ret); > + goto err_unregister_subdev; > + } This should be only called once for the v4l2_dev, but the code here would end up calling this once per each pipe. > + > + /* Create video nodes and links */ > + for (i = 0; i < pipe->num_nodes; i++) { > + ret = mtk_dip_video_device_v4l2_register(pipe, > + &pipe->nodes[i]); > + if (ret) > + goto err_unregister_subdev; > + } > + > + return 0; > + > +err_unregister_subdev: > + v4l2_device_unregister_subdev(&pipe->subdev); > + > +err_media_entity_cleanup: > + media_entity_cleanup(&pipe->subdev.entity); > + > +err_free_subdev_pads: > + devm_kfree(&pipe->dip_dev->pdev->dev, pipe->subdev_pads); > + > +err_release_ctrl: > + mtk_dip_pipe_v4l2_ctrl_release(pipe); > + > + return ret; > +} > + > +void mtk_dip_pipe_v4l2_unregister(struct mtk_dip_pipe *pipe) > +{ > + unsigned int i; > + > + for (i = 0; i < pipe->num_nodes; i++) { > + video_unregister_device(&pipe->nodes[i].vdev); > + vb2_queue_release(&pipe->nodes[i].dev_q.vbq); > + media_entity_cleanup(&pipe->nodes[i].vdev.entity); > + mutex_destroy(&pipe->nodes[i].dev_q.lock); > + } > + > + v4l2_device_unregister_subdev(&pipe->subdev); > + media_entity_cleanup(&pipe->subdev.entity); > + v4l2_device_unregister(&pipe->dip_dev->v4l2_dev); Wouldn't this end up unregistering the same v4l2_dev more than 1 time? Please make sure that the driver works when compiled as a module and then unloaded and reloaded again. > + media_device_unregister(&pipe->dip_dev->mdev); > + media_device_cleanup(&pipe->dip_dev->mdev); > + mtk_dip_pipe_v4l2_ctrl_release(pipe); > +} > + > +/******************************************** > + * MTK DIP V4L2 Settings * > + ********************************************/ > + > +static const struct v4l2_ioctl_ops mtk_dip_v4l2_video_out_ioctl_ops = { > + .vidioc_querycap = mtk_dip_videoc_querycap, > + > + .vidioc_enum_framesizes = mtk_dip_videoc_enum_framesizes, > + .vidioc_enum_fmt_vid_cap_mplane = mtk_dip_videoc_enum_fmt, > + .vidioc_g_fmt_vid_cap_mplane = mtk_dip_videoc_g_fmt, > + .vidioc_s_fmt_vid_cap_mplane = mtk_dip_videoc_s_fmt, > + .vidioc_try_fmt_vid_cap_mplane = mtk_dip_videoc_try_fmt, No need for cap ioctls on an out node. > + > + .vidioc_enum_fmt_vid_out_mplane = mtk_dip_videoc_enum_fmt, > + .vidioc_g_fmt_vid_out_mplane = mtk_dip_videoc_g_fmt, > + .vidioc_s_fmt_vid_out_mplane = mtk_dip_videoc_s_fmt, > + .vidioc_try_fmt_vid_out_mplane = mtk_dip_videoc_try_fmt, > + > + .vidioc_reqbufs = vb2_ioctl_reqbufs, > + .vidioc_create_bufs = vb2_ioctl_create_bufs, > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, > + .vidioc_querybuf = vb2_ioctl_querybuf, > + .vidioc_qbuf = vb2_ioctl_qbuf, > + .vidioc_dqbuf = vb2_ioctl_dqbuf, > + .vidioc_streamon = vb2_ioctl_streamon, > + .vidioc_streamoff = vb2_ioctl_streamoff, > + .vidioc_expbuf = vb2_ioctl_expbuf, > + > + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, > + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, > +}; > + > +static const struct v4l2_ioctl_ops mtk_dip_v4l2_video_cap_ioctl_ops = { > + .vidioc_querycap = mtk_dip_videoc_querycap, > + > + .vidioc_enum_framesizes = mtk_dip_videoc_enum_framesizes, > + .vidioc_enum_fmt_vid_cap_mplane = mtk_dip_videoc_enum_fmt, > + .vidioc_g_fmt_vid_cap_mplane = mtk_dip_videoc_g_fmt, > + .vidioc_s_fmt_vid_cap_mplane = mtk_dip_videoc_s_fmt, > + .vidioc_try_fmt_vid_cap_mplane = mtk_dip_videoc_try_fmt, > + > + .vidioc_enum_fmt_vid_out_mplane = mtk_dip_videoc_enum_fmt, > + .vidioc_g_fmt_vid_out_mplane = mtk_dip_videoc_g_fmt, > + .vidioc_s_fmt_vid_out_mplane = mtk_dip_videoc_s_fmt, > + .vidioc_try_fmt_vid_out_mplane = mtk_dip_videoc_try_fmt, No need for out ioctls on a cap node. > + > + .vidioc_reqbufs = vb2_ioctl_reqbufs, > + .vidioc_create_bufs = vb2_ioctl_create_bufs, > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, > + .vidioc_querybuf = vb2_ioctl_querybuf, > + .vidioc_qbuf = vb2_ioctl_qbuf, > + .vidioc_dqbuf = vb2_ioctl_dqbuf, > + .vidioc_streamon = vb2_ioctl_streamon, > + .vidioc_streamoff = vb2_ioctl_streamoff, > + .vidioc_expbuf = vb2_ioctl_expbuf, > + > + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, > + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, > +}; > + > +static const struct v4l2_ioctl_ops mtk_dip_v4l2_meta_out_ioctl_ops = { > + .vidioc_querycap = mtk_dip_videoc_querycap, > + > + .vidioc_enum_fmt_meta_cap = mtk_dip_meta_enum_format, > + .vidioc_g_fmt_meta_cap = mtk_dip_videoc_g_meta_fmt, > + .vidioc_s_fmt_meta_cap = mtk_dip_videoc_g_meta_fmt, > + .vidioc_try_fmt_meta_cap = mtk_dip_videoc_g_meta_fmt, > + > + .vidioc_enum_fmt_meta_out = mtk_dip_meta_enum_format, > + .vidioc_g_fmt_meta_out = mtk_dip_videoc_g_meta_fmt, > + .vidioc_s_fmt_meta_out = mtk_dip_videoc_g_meta_fmt, > + .vidioc_try_fmt_meta_out = mtk_dip_videoc_g_meta_fmt, > + > + .vidioc_reqbufs = vb2_ioctl_reqbufs, > + .vidioc_create_bufs = vb2_ioctl_create_bufs, > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, > + .vidioc_querybuf = vb2_ioctl_querybuf, > + .vidioc_qbuf = vb2_ioctl_qbuf, > + .vidioc_dqbuf = vb2_ioctl_dqbuf, > + .vidioc_streamon = vb2_ioctl_streamon, > + .vidioc_streamoff = vb2_ioctl_streamoff, > + .vidioc_expbuf = vb2_ioctl_expbuf, > +}; > + > +static const struct mtk_dip_dev_format fw_param_fmts[] = { > + { > + .format = V4L2_META_FMT_MTISP_PARAMS, > + .buffer_size = 1024 * 128, > + }, > +}; > + > +static const struct mtk_dip_dev_format in_fmts[] = { > + { > + .format = V4L2_PIX_FMT_MTISP_B10, > + .mdp_color = MDP_COLOR_BAYER10, > + .colorspace = V4L2_COLORSPACE_SRGB, > + .depth = { 10 }, > + .row_depth = { 10 }, > + .num_planes = 1, > + }, > + { > + .format = V4L2_PIX_FMT_MTISP_F10, > + .mdp_color = MDP_COLOR_FULLG10, > + .colorspace = V4L2_COLORSPACE_RAW, > + .depth = { 15 }, > + .row_depth = { 15 }, > + .num_planes = 1, > + }, > + { > + .format = V4L2_PIX_FMT_VYUY, > + .mdp_color = MDP_COLOR_VYUY, > + .colorspace = V4L2_COLORSPACE_BT2020, Is the color space tied to particular pixel format on hardware level? > + .depth = { 16 }, > + .row_depth = { 16 }, > + .num_planes = 1, > + }, > + { > + .format = V4L2_PIX_FMT_YUYV, > + .mdp_color = MDP_COLOR_YUYV, > + .colorspace = V4L2_COLORSPACE_BT2020, > + .depth = { 16 }, > + .row_depth = { 16 }, > + .num_planes = 1, > + }, > + { > + .format = V4L2_PIX_FMT_YVYU, > + .mdp_color = MDP_COLOR_YVYU, > + .colorspace = V4L2_COLORSPACE_BT2020, > + .depth = { 16 }, > + .row_depth = { 16 }, > + .num_planes = 1, > + }, > + { > + .format = V4L2_PIX_FMT_NV12, > + .mdp_color = MDP_COLOR_NV12, > + .colorspace = V4L2_COLORSPACE_BT2020, > + .depth = { 12 }, > + .row_depth = { 8 }, > + .num_planes = 1, > + }, > + { > + .format = V4L2_PIX_FMT_YUV420M, > + .mdp_color = MDP_COLOR_I420, > + .colorspace = V4L2_COLORSPACE_BT2020, > + .depth = { 8, 2, 2 }, > + .row_depth = { 8, 4, 4 }, > + .num_planes = 3, > + }, > + { > + .format = V4L2_PIX_FMT_YVU420M, > + .mdp_color = MDP_COLOR_YV12, > + .colorspace = V4L2_COLORSPACE_BT2020, > + .depth = { 8, 2, 2 }, > + .row_depth = { 8, 4, 4 }, > + .num_planes = 3, > + }, > + { > + .format = V4L2_PIX_FMT_NV12M, > + .mdp_color = MDP_COLOR_NV12, > + .colorspace = V4L2_COLORSPACE_BT2020, > + .depth = { 8, 4 }, > + .row_depth = { 8, 8 }, What is depth and what is row_depth? They both seem to not match NV12, which should have 16 bits per sample in the CbCr plane. > + .num_planes = 2, > + }, > +}; > + > +static const struct mtk_dip_dev_format out_fmts[] = { > + { > + .format = V4L2_PIX_FMT_VYUY, > + .mdp_color = MDP_COLOR_VYUY, > + .colorspace = MDP_YCBCR_PROFILE_BT601, > + .depth = { 16 }, > + .row_depth = { 16 }, > + .num_planes = 1, > + }, > + { > + .format = V4L2_PIX_FMT_YUYV, > + .mdp_color = MDP_COLOR_YUYV, > + .colorspace = MDP_YCBCR_PROFILE_BT601, > + .depth = { 16 }, > + .row_depth = { 16 }, > + .num_planes = 1, > + }, > + { > + .format = V4L2_PIX_FMT_YVYU, > + .mdp_color = MDP_COLOR_YVYU, > + .colorspace = MDP_YCBCR_PROFILE_BT601, > + .depth = { 16 }, > + .row_depth = { 16 }, > + .num_planes = 1, > + }, > + { > + .format = V4L2_PIX_FMT_YVU420, > + .mdp_color = MDP_COLOR_YV12, > + .colorspace = MDP_YCBCR_PROFILE_BT601, > + .depth = { 12 }, > + .row_depth = { 8 }, > + .num_planes = 1, > + }, > + { > + .format = V4L2_PIX_FMT_NV12, > + .mdp_color = MDP_COLOR_NV12, > + .colorspace = MDP_YCBCR_PROFILE_BT601, > + .depth = { 12 }, > + .row_depth = { 8 }, > + .num_planes = 1, > + }, > + { > + .format = V4L2_PIX_FMT_YUV420M, > + .mdp_color = MDP_COLOR_I420, > + .colorspace = V4L2_COLORSPACE_BT2020, Is this correct? The other entries above use MDP_YCBCR_PROFILE_ macros, while this and further entries use V4L2_COLORSPACE_. > + .depth = { 8, 2, 2 }, > + .row_depth = { 8, 4, 4 }, > + .num_planes = 3, > + }, > + { > + .format = V4L2_PIX_FMT_YVU420M, > + .mdp_color = MDP_COLOR_YV12, > + .colorspace = V4L2_COLORSPACE_BT2020, > + .depth = { 8, 2, 2 }, > + .row_depth = { 8, 4, 4 }, > + .num_planes = 3, > + }, > + { > + .format = V4L2_PIX_FMT_NV12M, > + .mdp_color = MDP_COLOR_NV12, > + .colorspace = V4L2_COLORSPACE_BT2020, Why does NV12M have a different colorspace than NV12? > + .depth = { 8, 4 }, > + .row_depth = { 8, 8 }, > + .num_planes = 2, > + } > +}; > + > +static const struct v4l2_frmsizeenum in_frmsizeenum = { > + .type = V4L2_FRMSIZE_TYPE_CONTINUOUS, > + .stepwise.max_width = MTK_DIP_CAPTURE_MAX_WIDTH, > + .stepwise.min_width = MTK_DIP_CAPTURE_MIN_WIDTH, > + .stepwise.max_height = MTK_DIP_CAPTURE_MAX_HEIGHT, > + .stepwise.min_height = MTK_DIP_CAPTURE_MIN_HEIGHT, > + .stepwise.step_height = 1, > + .stepwise.step_width = 1, > +}; > + > +static const struct v4l2_frmsizeenum out_frmsizeenum = { > + .type = V4L2_FRMSIZE_TYPE_CONTINUOUS, > + .stepwise.max_width = MTK_DIP_OUTPUT_MAX_WIDTH, > + .stepwise.min_width = MTK_DIP_OUTPUT_MIN_WIDTH, > + .stepwise.max_height = MTK_DIP_OUTPUT_MAX_HEIGHT, > + .stepwise.min_height = MTK_DIP_OUTPUT_MIN_HEIGHT, > + .stepwise.step_height = 1, > + .stepwise.step_width = 1, > +}; > + > +static const struct mtk_dip_video_device_desc > +output_queues_setting[MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM] = { > + { > + .id = MTK_DIP_VIDEO_NODE_ID_RAW_OUT, > + .name = "Raw Input", > + .cap = V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING, > + .buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE, > + .smem_alloc = 0, > + .flags = MEDIA_LNK_FL_ENABLED, > + .fmts = in_fmts, > + .num_fmts = ARRAY_SIZE(in_fmts), > + .default_fmt_idx = 0, > + .default_width = MTK_DIP_OUTPUT_MAX_WIDTH, > + .default_height = MTK_DIP_OUTPUT_MAX_HEIGHT, > + .dma_port = 0, > + .frmsizeenum = &in_frmsizeenum, > + .ops = &mtk_dip_v4l2_video_out_ioctl_ops, > + .description = "Main image source", > + }, > + { > + .id = MTK_DIP_VIDEO_NODE_ID_TUNING_OUT, > + .name = "Tuning", > + .cap = V4L2_CAP_META_OUTPUT | V4L2_CAP_STREAMING, > + .buf_type = V4L2_BUF_TYPE_META_OUTPUT, > + .smem_alloc = 1, > + .flags = 0, > + .fmts = fw_param_fmts, > + .num_fmts = 1, Please still use ARRAY_SIZE() even if the array has just 1 entry. > + .default_fmt_idx = 0, > + .dma_port = 0, > + .frmsizeenum = &in_frmsizeenum, > + .ops = &mtk_dip_v4l2_meta_out_ioctl_ops, > + .description = "Tuning data", > + }, > +}; > + > +static const struct mtk_dip_video_device_desc > +reprocess_output_queues_setting[MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM] = { > + { > + .id = MTK_DIP_VIDEO_NODE_ID_RAW_OUT, > + .name = "Raw Input", > + .cap = V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING, > + .buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE, > + .smem_alloc = 0, > + .flags = MEDIA_LNK_FL_ENABLED, > + .fmts = in_fmts, > + .num_fmts = ARRAY_SIZE(in_fmts), > + .default_fmt_idx = 5, > + .default_width = MTK_DIP_OUTPUT_MAX_WIDTH, > + .default_height = MTK_DIP_OUTPUT_MAX_HEIGHT, > + .dma_port = 0, > + .frmsizeenum = &in_frmsizeenum, > + .ops = &mtk_dip_v4l2_video_out_ioctl_ops, > + .description = "Source image to be process", > + > + }, > + { > + .id = MTK_DIP_VIDEO_NODE_ID_TUNING_OUT, > + .name = "Tuning", > + .cap = V4L2_CAP_META_OUTPUT | V4L2_CAP_STREAMING, > + .buf_type = V4L2_BUF_TYPE_META_OUTPUT, > + .smem_alloc = 1, > + .flags = 0, > + .fmts = fw_param_fmts, > + .num_fmts = 1, > + .default_fmt_idx = 0, > + .dma_port = 0, > + .frmsizeenum = &in_frmsizeenum, > + .ops = &mtk_dip_v4l2_meta_out_ioctl_ops, > + .description = "Tuning data for image enhancement", > + }, > +}; The entries here seem to be almost the same to output_queues_setting[], the only difference seems to be default_fmt_idx and description. What's the difference between the capture and reprocess pipes? > + > +static const struct mtk_dip_video_device_desc > +capture_queues_setting[MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM] = { > + { > + .id = MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE, > + .name = "MDP0", > + .cap = V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_STREAMING, > + .buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, > + .smem_alloc = 0, > + .flags = MEDIA_LNK_FL_DYNAMIC | MEDIA_LNK_FL_ENABLED, > + .fmts = out_fmts, > + .num_fmts = ARRAY_SIZE(out_fmts), > + .default_fmt_idx = 1, > + .default_width = MTK_DIP_CAPTURE_MAX_WIDTH, > + .default_height = MTK_DIP_CAPTURE_MAX_HEIGHT, > + .dma_port = 0, > + .frmsizeenum = &out_frmsizeenum, > + .ops = &mtk_dip_v4l2_video_cap_ioctl_ops, > + .description = "Output quality enhanced image", > + }, > + { > + .id = MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE, > + .name = "MDP1", > + .cap = V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_STREAMING, > + .buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, > + .smem_alloc = 0, > + .flags = MEDIA_LNK_FL_DYNAMIC | MEDIA_LNK_FL_ENABLED, > + .fmts = out_fmts, > + .num_fmts = ARRAY_SIZE(out_fmts), > + .default_fmt_idx = 1, > + .default_width = MTK_DIP_CAPTURE_MAX_WIDTH, > + .default_height = MTK_DIP_CAPTURE_MAX_HEIGHT, > + .dma_port = 0, > + .frmsizeenum = &out_frmsizeenum, > + .ops = &mtk_dip_v4l2_video_cap_ioctl_ops, > + .description = "Output quality enhanced image", > + > + }, > +}; > + > +static const struct mtk_dip_pipe_desc > +pipe_settings[MTK_DIP_PIPE_ID_TOTAL_NUM] = { > + { > + .name = MTK_DIP_DEV_DIP_PREVIEW_NAME, This string macro is only used here. Please just explicitly put the string here. Also, as per my other comment, this should probably be just a suffix that's added to dev_driver_string(). > + .id = MTK_DIP_PIPE_ID_PREVIEW, > + .master = MTK_DIP_VIDEO_NODE_ID_NO_MASTER, > + .output_queue_descs = output_queues_setting, > + .total_output_queues = MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM, > + .capture_queue_descs = capture_queues_setting, > + .total_capture_queues = MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM, Why do we need this split into output and capture descriptors? They have the same type. > + }, > + { > + .name = MTK_DIP_DEV_DIP_CAPTURE_NAME, Ditto. > + .id = MTK_DIP_PIPE_ID_CAPTURE, > + .master = MTK_DIP_VIDEO_NODE_ID_NO_MASTER, > + .output_queue_descs = output_queues_setting, > + .total_output_queues = MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM, > + .capture_queue_descs = capture_queues_setting, > + .total_capture_queues = MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM, > + }, > + { > + .name = MTK_DIP_DEV_DIP_REPROCESS_NAME, Ditto. > + .id = MTK_DIP_PIPE_ID_REPROCESS, > + .master = MTK_DIP_VIDEO_NODE_ID_NO_MASTER, > + .output_queue_descs = reprocess_output_queues_setting, > + .total_output_queues = MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM, > + .capture_queue_descs = capture_queues_setting, > + .total_capture_queues = MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM, > + }, > +}; > + > +static int mtk_dip_dev_v4l2_init(struct mtk_dip_dev *dip_dev) > +{ > + struct media_device *media_dev = &dip_dev->mdev; > + struct v4l2_device *v4l2_dev = &dip_dev->v4l2_dev; > + int i; > + int ret; > + > + ret = mtk_dip_dev_media_register(&dip_dev->pdev->dev, Do we need to store pdev in dip_dev? Wouldn't storing just dev there simplify things? > + media_dev, > + MTK_DIP_DEV_DIP_MEDIA_MODEL_NAME); Do we need to pass a constant to this function? Could we just use it directly from there? Also, why not just pass dip_dev instead of the 2 first arguments? > + if (ret) { > + dev_err(&dip_dev->pdev->dev, > + "%s: media device register failed(%d)\n", > + __func__, ret); > + return ret; > + } > + > + ret = mtk_dip_dev_v4l2_register(&dip_dev->pdev->dev, > + media_dev, > + v4l2_dev); > + if (ret) { > + dev_err(&dip_dev->pdev->dev, > + "%s: v4l2 device register failed(%d)\n", > + __func__, ret); > + goto err_release_media_device; > + } > + > + for (i = 0; i < MTK_DIP_PIPE_ID_TOTAL_NUM; i++) { > + ret = mtk_dip_pipe_init(&dip_dev->dip_pipe[i], dip_dev, > + &pipe_settings[i], media_dev, v4l2_dev); nit: The usual convention is to pass the arguments from the "broadest" datastructures, e.g. the main driver structure - dip_dev, to the most specific ones, so dip_dev should be made the first argument. There isn't much point in passing media_dev and v4l2_dev here, because we already have them in dip_dev. > + if (ret) { > + dev_err(&dip_dev->pdev->dev, > + "%s: Pipe id(%d) init failed(%d)\n", > + dip_dev->dip_pipe[i].desc->name, > + i, ret); > + goto err_release_pipe; > + } > + } > + > + return 0; > + > +err_release_pipe: > + for (i = i - 1; i >= 0; i--) nit: The initial decrement could be just written as i--. > + mtk_dip_pipe_release(&dip_dev->dip_pipe[i]); > + > + v4l2_device_unregister(v4l2_dev); > + > +err_release_media_device: > + media_device_unregister(media_dev); > + media_device_cleanup(media_dev); Could we move this two into a function called mtk_dip_dev_media_unregister() to be consistent with the initialization? > + > + return ret; > +} > + > +void mtk_dip_dev_v4l2_release(struct mtk_dip_dev *dip_dev) > +{ > + int i; > + > + for (i = 0; i < MTK_DIP_PIPE_ID_TOTAL_NUM; i++) > + mtk_dip_pipe_release(&dip_dev->dip_pipe[i]); > + > + v4l2_device_unregister(&dip_dev->v4l2_dev); > + media_device_unregister(&dip_dev->mdev); > + media_device_cleanup(&dip_dev->mdev); > +} > + > +static int mtk_dip_probe(struct platform_device *pdev) > +{ > + struct mtk_dip_dev *dip_dev; > + struct mtk_dip_hw *dip_hw; > + struct device_node *node; > + struct platform_device *larb_pdev; > + phandle rproc_phandle; > + int ret; > + > + dip_dev = devm_kzalloc(&pdev->dev, sizeof(*dip_dev), GFP_KERNEL); > + if (!dip_dev) > + return -ENOMEM; > + > + dip_dev->pdev = pdev; > + dev_set_drvdata(&pdev->dev, dip_dev); > + dip_hw = &dip_dev->dip_hw; > + > + node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0); > + if (!node) { > + dev_err(&pdev->dev, "No mediatek,larb found"); > + return -EINVAL; > + } > + > + larb_pdev = of_find_device_by_node(node); > + if (!larb_pdev) { > + dev_err(&pdev->dev, "No mediatek,larb device found"); > + return -EINVAL; > + } We shouldn't need this custom larb handling anymore. > + > + dip_hw->clks[0].id = "larb5"; > + dip_hw->clks[1].id = "dip"; > + > + ret = devm_clk_bulk_get(&pdev->dev, MTK_DIP_CLK_NUM, Could we use ARRAY_SIZE(clks) instead? > + dip_hw->clks); > + if (ret) { > + dev_err(&pdev->dev, "Failed to get LARB5 and DIP clks:%d\n", > + ret); > + return ret; > + } > + > + dip_hw->scp_pdev = scp_get_pdev(dip_dev->pdev); > + if (!dip_hw->scp_pdev) { > + dev_err(&dip_dev->pdev->dev, > + "%s: failed to get scp device\n", > + __func__); > + return -EINVAL; > + } > + > + if (of_property_read_u32(dip_dev->pdev->dev.of_node, > + "mediatek,scp", > + &rproc_phandle)) { > + dev_err(&dip_dev->pdev->dev, > + "%s: could not get scp device\n", > + __func__); > + return -EINVAL; > + } > + > + dip_hw->rproc_handle = rproc_get_by_phandle(rproc_phandle); > + if (!dip_hw->rproc_handle) { > + dev_err(&dip_dev->pdev->dev, > + "%s: could not get DIP's rproc_handle\n", > + __func__); > + return -EINVAL; > + } > + > + atomic_set(&dip_hw->dip_stream_cnt, 0); > + atomic_set(&dip_hw->dip_enque_cnt, 0); > + atomic_set(&dip_hw->num_composing, 0); > + atomic_set(&dip_hw->num_running, 0); > + mutex_init(&dip_hw->hw_op_lock); > + /* Limited by the co-processor side's stack size */ > + sema_init(&dip_hw->sem, DIP_COMPOSING_MAX_NUM); > + > + ret = mtk_dip_hw_working_buf_pool_init(dip_hw); > + if (ret) { > + dev_err(&pdev->dev, "working buffer init failed(%d)\n", ret); > + return ret; > + } > + > + ret = mtk_dip_dev_v4l2_init(dip_dev); > + if (ret) > + dev_err(&pdev->dev, "v4l2 init failed(%d)\n", ret); Don't we need to clean up the buffer pool initialization if we fail here? > + It's also necessary to initialize autosuspend here by calling pm_runtime_use_autosuspend() and pm_runtime_set_autosuspend_delay(). The delay should be something around 2-3 times the time it takes to suspend and resume the device. > + pm_runtime_enable(&pdev->dev); > + > + return ret; > +} > + > +static int mtk_dip_remove(struct platform_device *pdev) > +{ > + struct mtk_dip_dev *dip_dev = dev_get_drvdata(&pdev->dev); > + > + mtk_dip_hw_working_buf_pool_release(&dip_dev->dip_hw); There might be already something running at this point and we would free the buffers here. Generally the order of remove should be the opposite to the probe. > + mtk_dip_dev_v4l2_release(dip_dev); > + pm_runtime_disable(&pdev->dev); > + mutex_destroy(&dip_dev->dip_hw.hw_op_lock); > + > + return 0; > +} > + > +static int __maybe_unused mtk_dip_pm_suspend(struct device *dev) Perhaps mtk_dip_runtime_suspend()? > +{ > + struct mtk_dip_dev *dip_dev = dev_get_drvdata(dev); > + > + clk_bulk_disable_unprepare(MTK_DIP_CLK_NUM, dip_dev->dip_hw.clks); > + dev_dbg(dev, "%s: disabled dip clks\n", __func__); > + > + return 0; > +} > + > +static int __maybe_unused mtk_dip_pm_resume(struct device *dev) mtk_dip_runtime_resume()? > +{ > + struct mtk_dip_dev *dip_dev = dev_get_drvdata(dev); > + int ret = clk_bulk_prepare_enable(MTK_DIP_CLK_NUM, > + dip_dev->dip_hw.clks); > + if (ret) { > + dev_err(dev, "%s: failed to enable dip clks(%d)\n", > + __func__, ret); > + return ret; > + } > + dev_dbg(dev, "%s: enabled dip clks\n", __func__); > + > + ret = rproc_boot(dip_dev->dip_hw.rproc_handle); > + if (ret) > + dev_err(dev, "%s: FW load failed(rproc:%p):%d\n", > + __func__, dip_dev->dip_hw.rproc_handle, ret); nit: Please return ret from here and keep the path below only for success. > + else > + dev_dbg(dev, "%s: FW loaded(rproc:%p)\n", > + __func__, dip_dev->dip_hw.rproc_handle); > + > + return ret; > +} > + > +static int mtk_dip_get_scp_job_num(struct mtk_dip_dev *dip_dev) > +{ > + int num; > + > + mutex_lock(&dip_dev->dip_hw.hw_op_lock); > + num = atomic_read(&dip_dev->dip_hw.num_composing); > + mutex_unlock(&dip_dev->dip_hw.hw_op_lock); It's not allowed to use sleeping operations in a wait_event condition, because the condition could be evaluated while the current process already enters the UNINTERRUPTIBLE state. Given that this is already an atomic_t, there shouldn't be any special synchronization needed here. Please just use atomic_read() in the wait_event_timeout() call directly. > + > + return num; > +} > + > +static int __maybe_unused mtk_dip_suspend(struct device *dev) > +{ > + struct mtk_dip_dev *dip_dev = dev_get_drvdata(dev); > + int ret, num; > + > + if (pm_runtime_suspended(dev)) { > + dev_dbg(dev, "%s: pm_runtime_suspended is true, no action\n", > + __func__); > + return 0; > + } > + > + ret = wait_event_timeout(dip_dev->dip_hw.flushing_hw_wq, > + !(num = mtk_dip_get_scp_job_num(dip_dev)), > + msecs_to_jiffies(200)); Is 200 milliseconds a reasonable timeout here, i.e. for any potential use case it would always take less than 200 ms to wait for all the tasks running in the ISP? > + if (!ret && num) { > + dev_err(dev, "%s: flushing SCP job timeout, num(%d)\n", > + __func__, num); > + > + return -EBUSY; > + } > + > + return mtk_dip_pm_suspend(dev); We should call pm_runtime_force_suspend() instead, so that it also handles any device dependencies or power domains. > +} > + > +static int __maybe_unused mtk_dip_resume(struct device *dev) > +{ > + if (pm_runtime_suspended(dev)) { > + dev_dbg(dev, "%s: pm_runtime_suspended is true, no action\n", > + __func__); > + return 0; > + } > + > + return mtk_dip_pm_resume(dev); pm_runtime_force_resume() > +} > + > +static const struct dev_pm_ops mtk_dip_pm_ops = { > + SET_SYSTEM_SLEEP_PM_OPS(mtk_dip_suspend, mtk_dip_resume) > + SET_RUNTIME_PM_OPS(mtk_dip_suspend, mtk_dip_resume, NULL) I think you meant mtk_dip_pm_suspend/resume for the runtime PM ops? Best regards, Tomasz ^ permalink raw reply [flat|nested] 12+ messages in thread
[parent not found: <20190731071014.GA43159-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>]
* Re: [RFC PATCH V2 4/6] platform: mtk-isp: Add Mediatek DIP driver [not found] ` <20190731071014.GA43159-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org> @ 2019-08-27 3:16 ` Frederic Chen 2019-08-30 7:14 ` Tomasz Figa 0 siblings, 1 reply; 12+ messages in thread From: Frederic Chen @ 2019-08-27 3:16 UTC (permalink / raw) To: Tomasz Figa Cc: Kurt.Yang-NuS5LvNUpcJWk0Htik3J/w, Shih-Fang.Chuang-NuS5LvNUpcJWk0Htik3J/w, laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw, Rynn Wu (吳育恩), Allan Yang (楊智鈞), suleiman-F7+t8E8rja9g9hUCZPvPmw, Jerry-ch Chen (陳敬憲), Jungo Lin (林明俊), hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w, hung-wen.hsieh-NuS5LvNUpcJWk0Htik3J/w, linux-media-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, Holmes Chiou (邱挺), shik-F7+t8E8rja9g9hUCZPvPmw, yuzhao-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org Dear Tomasz, I appreciate your comment. I will collaborate more closely with Jungo to solve the common issues in DIP and Pass 1(CAM) drivers. On Wed, 2019-07-31 at 15:10 +0800, Tomasz Figa wrote: > Hi Frederic, > > On Mon, Jul 08, 2019 at 07:04:58PM +0800, frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote: > > From: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > > > This patch adds the driver of Digital Image Processing (DIP) > > unit in Mediatek ISP system, providing image format > > conversion, resizing, and rotation features. > > > > The mtk-isp directory will contain drivers for multiple IP > > blocks found in Mediatek ISP system. It will include ISP > > Pass 1 driver(CAM), sensor interface driver, DIP driver and > > face detection driver. > > > > Signed-off-by: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > --- > > drivers/media/platform/mtk-isp/Makefile | 7 + > > .../media/platform/mtk-isp/isp_50/Makefile | 7 + > > .../platform/mtk-isp/isp_50/dip/Makefile | 18 + > > .../platform/mtk-isp/isp_50/dip/mtk_dip-dev.c | 769 +++++++ > > .../platform/mtk-isp/isp_50/dip/mtk_dip-dev.h | 337 ++++ > > .../platform/mtk-isp/isp_50/dip/mtk_dip-hw.h | 155 ++ > > .../platform/mtk-isp/isp_50/dip/mtk_dip-sys.c | 794 ++++++++ > > .../mtk-isp/isp_50/dip/mtk_dip-v4l2.c | 1786 +++++++++++++++++ > > 8 files changed, 3873 insertions(+) > > create mode 100644 drivers/media/platform/mtk-isp/Makefile > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/Makefile > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/Makefile > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c > > > > Thanks for v2! The code is getting better, but there are still problems. > Please check my comments inline. > > Note that it would be really good if you could collaborate more closely with > Jungo working on the P1 driver, as I noticed similar problems in both > drivers, with some being addressed only in one of the drivers, but not the > other. > > > diff --git a/drivers/media/platform/mtk-isp/Makefile b/drivers/media/platform/mtk-isp/Makefile > > new file mode 100644 > > index 000000000000..b08d3bdf2800 > > --- /dev/null > > +++ b/drivers/media/platform/mtk-isp/Makefile > > @@ -0,0 +1,7 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +# > > +# Copyright (C) 2019 MediaTek Inc. > > +# > > + > > +obj-y += isp_50/ > > + > > diff --git a/drivers/media/platform/mtk-isp/isp_50/Makefile b/drivers/media/platform/mtk-isp/isp_50/Makefile > > new file mode 100644 > > index 000000000000..564c3889c34c > > --- /dev/null > > +++ b/drivers/media/platform/mtk-isp/isp_50/Makefile > > @@ -0,0 +1,7 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +# > > +# Copyright (C) 2019 MediaTek Inc. > > +# > > + > > +obj-$(CONFIG_VIDEO_MEDIATEK_ISP_DIP) += dip/ > > + > > diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/Makefile b/drivers/media/platform/mtk-isp/isp_50/dip/Makefile > > new file mode 100644 > > index 000000000000..99e760d7d5a9 > > --- /dev/null > > +++ b/drivers/media/platform/mtk-isp/isp_50/dip/Makefile > > @@ -0,0 +1,18 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +# > > +# Copyright (C) 2019 MediaTek Inc. > > +# > > + > > +$(info $(srctree)) > > +ccflags-y += -I$(srctree)/drivers/media/platform/mtk-mdp3 > > + > > +obj-$(CONFIG_VIDEO_MEDIATEK_ISP_DIP) += mtk_dip-v4l2.o > > + > > +# Utilities to provide frame-based streaming model > > +# with v4l2 user interfaces and alloc context managing > > +# memory shared between ISP and coprocessor > > +mtk_dip_util-objs := \ > > +mtk_dip-dev.o \ > > +mtk_dip-sys.o > > + > > +obj-$(CONFIG_VIDEO_MEDIATEK_ISP_DIP) += mtk_dip_util.o > > diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c > > new file mode 100644 > > index 000000000000..63256fa27428 > > --- /dev/null > > +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c > > @@ -0,0 +1,769 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (c) 2018 MediaTek Inc. > > + * > > + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > + * > > + */ > > + > > +#include <linux/dma-mapping.h> > > +#include <linux/platform_device.h> > > +#include <media/videobuf2-dma-contig.h> > > +#include <media/v4l2-event.h> > > +#include "mtk_dip-dev.h" > > +#include "mtk-mdp3-regs.h" > > +#include "mtk-img-ipi.h" > > + > > +int mtk_dip_pipe_init(struct mtk_dip_pipe *pipe, > > + struct mtk_dip_dev *dip_dev, > > + const struct mtk_dip_pipe_desc *setting, > > + struct media_device *media_dev, > > + struct v4l2_device *v4l2_dev) > > +{ > > + int ret, i, count = 0; > > + > > + pipe->dip_dev = dip_dev; > > + pipe->desc = setting; > > + pipe->num_nodes = MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; > > Rather than hardcoding the number, could we just pass ARRAY_SIZE(desc) to > this function from the caller? > Yes, I will use ARRAY_SIZE instead. > > + > > + atomic_set(&pipe->pipe_job_sequence, 0); > > + INIT_LIST_HEAD(&pipe->pipe_job_running_list); > > + INIT_LIST_HEAD(&pipe->pipe_job_pending_list); > > + spin_lock_init(&pipe->job_lock); > > + mutex_init(&pipe->lock); > > + > > + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) { > > i < pipe->num_nodes I got it. > > > + if (i < MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM) { > > + pipe->nodes[i].desc = > > + &pipe->desc->output_queue_descs[i]; > > + } else { > > + int cap_idx = i - MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM; > > + > > + pipe->nodes[i].desc = > > + &pipe->desc->capture_queue_descs[cap_idx]; > > + } > > We shouldn't need this if/else block if we put all the descriptors in one > array. > I will merge capture_queue_descs and output_queue_descs. > > + > > + pipe->nodes[i].flags = > > + pipe->nodes[i].desc->flags; > > No need to wrap the line here. I got it. > > > + atomic_set(&pipe->nodes[i].sequence, 0); > > I don't see this sequence used anywhere else in the driver. I will remove it. > > > + spin_lock_init(&pipe->nodes[i].buf_list_lock); > > + INIT_LIST_HEAD(&pipe->nodes[i].buf_list); > > + > > + if (pipe->nodes[i].flags & MEDIA_LNK_FL_ENABLED) > > + count++; > > + } > > + > > + if (pipe->desc->master >= 0 && > > + pipe->desc->master < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM) { > > + if (!(pipe->nodes[pipe->desc->master].flags & > > + MEDIA_LNK_FL_ENABLED)) > > + count++; > > + > > + pipe->nodes[pipe->desc->master].flags |= > > + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE; > > + } > > All the pipes seem to have master set to MTK_DIP_VIDEO_NODE_ID_NO_MASTER, so > this seems to be dead code. I will remove MTK_DIP_VIDEO_NODE_ID_NO_MASTER and the dead codes. > > > + > > + atomic_set(&pipe->cnt_nodes_not_streaming, count); > > + > > + ret = mtk_dip_pipe_v4l2_register(pipe, media_dev, v4l2_dev); > > + if (ret) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s: failed(%d) to create V4L2 devices\n", > > + pipe->desc->name, ret); > > + > > + goto err_destroy_pipe_lock; > > + } > > + > > + return 0; > > + > > +err_destroy_pipe_lock: > > + mutex_destroy(&pipe->lock); > > + > > + return ret; > > +} > > + > > +int mtk_dip_pipe_release(struct mtk_dip_pipe *pipe) > > +{ > > + mtk_dip_pipe_v4l2_unregister(pipe); > > + mutex_destroy(&pipe->lock); > > + > > + return 0; > > +} > > + > > +int mtk_dip_pipe_next_job_id(struct mtk_dip_pipe *pipe) > > +{ > > + int global_job_id = atomic_inc_return(&pipe->pipe_job_sequence); > > + > > + return (global_job_id & 0x0000FFFF) | (pipe->desc->id << 16); > > +} > > + > > +struct mtk_dip_pipe_job_info* > > +mtk_dip_pipe_get_running_job_info(struct mtk_dip_pipe *pipe, int pipe_job_id) > > +{ > > + struct mtk_dip_pipe_job_info *job_info; > > + > > + spin_lock(&pipe->job_lock); > > + list_for_each_entry(job_info, > > + &pipe->pipe_job_running_list, list) { > > + if (job_info->id == pipe_job_id) { > > + spin_unlock(&pipe->job_lock); > > + return job_info; > > + } > > + } > > + spin_unlock(&pipe->job_lock); > > + > > + return NULL; > > +} > > + > > +void mtk_dip_pipe_debug_job(struct mtk_dip_pipe *pipe, > > + struct mtk_dip_pipe_job_info *job_info) > > +{ > > + int i; > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, "%s: pipe-job(%p),id(%d)\n", > > + pipe->desc->name, job_info, job_info->id); > > + > > + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM ; i++) { > > + if (job_info->buf_map[i]) > > + dev_dbg(&pipe->dip_dev->pdev->dev, "%s:%s:buf(%p)\n", > > + pipe->desc->name, pipe->nodes[i].desc->name, i, > > + job_info->buf_map[i]); > > + } > > +} > > We should remove this kind of excessive debugging code. I'd recommend > keeping it as a local test-only patch on top of the driver. > I got it. > > + > > +int mtk_dip_pipe_job_finish(struct mtk_dip_pipe *pipe, > > + unsigned int pipe_job_info_id, > > + enum vb2_buffer_state vbf_state) > > This function only returns 0. Should it be made void? I will change it to a void one. > > > +{ > > + struct mtk_dip_pipe_job_info *job_info; > > + struct mtk_dip_dev_buffer *in_buf; > > + int i, num_running_jobs; > > + > > + job_info = mtk_dip_pipe_get_running_job_info(pipe, pipe_job_info_id); > > Why don't we just pass mtk_dip_request as an argument ot this function? I > can see that the both callers already have them. Yes, we will pass mtk_dip_request instead. > > > + in_buf = job_info->buf_map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT]; > > + > > + spin_lock(&pipe->job_lock); > > + list_del(&job_info->list); > > + num_running_jobs = --pipe->num_jobs; > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s: num of running jobs(%d)\n", > > + __func__, pipe->desc->name, pipe->num_jobs); > > + spin_unlock(&pipe->job_lock); > > + > > + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) { > > + struct mtk_dip_dev_buffer *dev_buf = job_info->buf_map[i]; > > + struct mtk_dip_video_device *node; > > + > > + if (!dev_buf) > > + continue; > > + > > + if (in_buf && dev_buf != in_buf) > > Is it possible that in_buf is NULL? in_buf is always not NULL. I will remove the check. > > > + dev_buf->vbb.vb2_buf.timestamp = > > + in_buf->vbb.vb2_buf.timestamp; > > + > > + vb2_buffer_done(&dev_buf->vbb.vb2_buf, vbf_state); > > + > > + node = mtk_dip_vbq_to_node(dev_buf->vbb.vb2_buf.vb2_queue); > > + spin_lock(&node->buf_list_lock); > > + list_del(&dev_buf->list); > > + spin_unlock(&node->buf_list_lock); > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s: return buf, idx(%d), state(%d)\n", > > + pipe->desc->name, node->desc->name, > > + dev_buf->vbb.vb2_buf.index, vbf_state); > > + } > > This looks almost the same as what's being done inside > mtk_dip_hw_streamoff(). Could we just call this function from the loop > there? I would like to call the function from mtk_dip_hw_streamoff(). The only difference is mtk_dip_pipe_job_finish() also remove the buffer from the node's internal list. > > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s: finished job id(%d), vbf_state(%d), running jobs(%d)\n", > > + __func__, pipe->desc->name, pipe_job_info_id, vbf_state, > > + num_running_jobs); > > + > > + return 0; > > +} > > + > > +static __u32 get_pixel_byte_by_fmt(__u32 pix_fmt) > > +{ > > + switch (pix_fmt) { > > + case V4L2_PIX_FMT_MTISP_B8: > > + case V4L2_PIX_FMT_MTISP_F8: > > + return 8; > > + case V4L2_PIX_FMT_MTISP_B10: > > + case V4L2_PIX_FMT_MTISP_F10: > > + return 10; > > + case V4L2_PIX_FMT_MTISP_B12: > > + case V4L2_PIX_FMT_MTISP_F12: > > + return 12; > > + case V4L2_PIX_FMT_MTISP_B14: > > + case V4L2_PIX_FMT_MTISP_F14: > > + return 14; > > + case V4L2_PIX_FMT_MTISP_U8: > > + case V4L2_PIX_FMT_MTISP_U10: > > + case V4L2_PIX_FMT_MTISP_U12: > > + case V4L2_PIX_FMT_MTISP_U14: > > From all the formats above, we only have B10 and F10 in in_fmts[]. Are they > all supported by DIP? If so, are they only missing in in_fmts[] or the > driver needs more changes to support them? DIP supports the formats except V4L2_PIX_FMT_MTISP_UXX. I will add them to in_fmts[]. > > > + return 16; > > + default: > > + return 0; > > + } > > +} > > + > > +static __u32 > > +mtk_dip_pass1_cal_main_stride(__u32 width, __u32 pix_fmt) > > +{ > > + __u32 stride; > > + __u32 pixel_byte = get_pixel_byte_by_fmt(pix_fmt); > > + > > + width = ALIGN(width, 4); > > + stride = ALIGN(DIV_ROUND_UP(width * pixel_byte, 8), 2); > > + > > + return ALIGN(stride, 4); > > +} > > + > > +static __u32 > > +mtk_dip_pass1_cal_pack_stride(__u32 width, __u32 pix_fmt) > > +{ > > + __u32 stride; > > + __u32 pixel_byte = get_pixel_byte_by_fmt(pix_fmt); > > The __ types are only for UAPI structures. Please use the types without > the prefix. I got it. > > > + > > + width = ALIGN(width, 4); > > + stride = DIV_ROUND_UP(width * 3, 2); > > + stride = DIV_ROUND_UP(stride * pixel_byte, 8); > > + > > + if (pix_fmt == V4L2_PIX_FMT_MTISP_F10) > > + stride = ALIGN(stride, 4); > > + else > > + stride = ALIGN(stride, 8); > > Could you explain all the calculations done above? If the buffer comes from mtk-cam-p1, the stride setting must be the same as p1. I would like to re-implement the codes following p1's design in v4 patch as following: static u32 mtk_dip_pass1_cal_pack_stride(u32 width, u32 pix_fmt) { unsigned int bpl; unsigned int pixel_bits = get_pixel_byte_by_fmt(mp->pixelformat); /* Bayer encoding format, P1 HW needs 2 bytes alignment */ bpl = ALIGN(DIV_ROUND_UP(width * pixel_bits, 8), 2); /* The setting also needs 4 bytes alignment for DIP HW */ return ALIGN(bpl, 4);; } static __u32 mtk_dip_pass1_cal_main_stride(u32 width, u32 pix_fmt) { unsigned int bpl, ppl; unsigned int pixel_bits = get_pixel_byte_by_fmt(mp->pixelformat); /* * The FULL-G encoding format * 1 G component per pixel * 1 R component per 4 pixel * 1 B component per 4 pixel * Total 4G/1R/1B in 4 pixel (pixel per line:ppl) */ ppl = DIV_ROUND_UP(width * 6, 4); bpl = DIV_ROUND_UP(ppl * pixel_bits, 8); /* 4 bytes alignment for 10 bit & others are 8 bytes */ if (pixel_bits == 10) bpl = ALIGN(bpl, 4); else bpl = ALIGN(bpl, 8); } return bpl; } > > > + > > + return stride; > > +} > > + > > +static int is_stride_need_to_align(u32 format, u32 *need_aligned_fmts, > > + int length) > > +{ > > + int i; > > + > > + for (i = 0; i < length; i++) { > > + if (format == need_aligned_fmts[i]) > > + return true; > > + } > > + > > + return false; > > +} > > + > > +/* Stride that is accepted by MDP HW */ > > +static u32 dip_mdp_fmt_get_stride(struct v4l2_pix_format_mplane *mfmt, > > + const struct mtk_dip_dev_format *fmt, > > + unsigned int plane) > > +{ > > + enum mdp_color c = fmt->mdp_color; > > + u32 bytesperline = (mfmt->width * fmt->row_depth[plane]) / 8; > > + u32 stride = (bytesperline * MDP_COLOR_BITS_PER_PIXEL(c)) > > + / fmt->row_depth[0]; > > + > > + if (plane == 0) > > + return stride; > > + > > + if (plane < MDP_COLOR_GET_PLANE_COUNT(c)) { > > + if (MDP_COLOR_IS_BLOCK_MODE(c)) > > + stride = stride / 2; > > + return stride; > > + } > > + > > + return 0; > > +} > > + > > +/* Stride that is accepted by MDP HW of format with contiguous planes */ > > +static u32 > > +dip_mdp_fmt_get_stride_contig(const struct mtk_dip_dev_format *fmt, > > + u32 pix_stride, > > + unsigned int plane) > > +{ > > + enum mdp_color c = fmt->mdp_color; > > + u32 stride = pix_stride; > > + > > + if (plane == 0) > > + return stride; > > + > > + if (plane < MDP_COLOR_GET_PLANE_COUNT(c)) { > > + stride = stride >> MDP_COLOR_GET_H_SUBSAMPLE(c); > > + if (MDP_COLOR_IS_UV_COPLANE(c) && !MDP_COLOR_IS_BLOCK_MODE(c)) > > + stride = stride * 2; > > + return stride; > > + } > > + > > + return 0; > > +} > > + > > +/* Plane size that is accepted by MDP HW */ > > +static u32 > > +dip_mdp_fmt_get_plane_size(const struct mtk_dip_dev_format *fmt, > > + u32 stride, u32 height, > > + unsigned int plane) > > +{ > > + enum mdp_color c = fmt->mdp_color; > > + u32 bytesperline; > > + > > + bytesperline = (stride * fmt->row_depth[0]) > > + / MDP_COLOR_BITS_PER_PIXEL(c); > > Hmm, stride and bytesperline should be exactly the same thing. Could you > explain what's happening here? The stride here is specific for MDP hardware (which uses the same MDP stride setting for NV12 and NV12M): bytesperline = width * row_depth / 8 MDP stride = width * MDP_COLOR_BITS_PER_PIXEL /8 Therfore, bytesperline = MDP stride * row_depth / MDP_COLOR_BITS_PER_PIXEL MDP stride = bytesperline * MDP_COLOR_BITS_PER_PIXEL/ row_depth > > > + if (plane == 0) > > + return bytesperline * height; > > + if (plane < MDP_COLOR_GET_PLANE_COUNT(c)) { > > + height = height >> MDP_COLOR_GET_V_SUBSAMPLE(c); > > + if (MDP_COLOR_IS_BLOCK_MODE(c)) > > + bytesperline = bytesperline * 2; > > + return bytesperline * height; > > + } > > + > > + return 0; > > +} > > + > > +static int mtk_dip_pipe_get_stride(struct mtk_dip_pipe *pipe, > > + struct v4l2_pix_format_mplane *mfmt, > > + const struct mtk_dip_dev_format *dfmt, > > + int plane, > > + char *buf_name) > > +{ > > + int bpl; > > + u32 fmts_pass1_main[] = { > > + V4L2_PIX_FMT_MTISP_B8, > > + V4L2_PIX_FMT_MTISP_B10 > > + }; > > + u32 fmts_pass1_pack[] = { > > + V4L2_PIX_FMT_MTISP_F8, > > + V4L2_PIX_FMT_MTISP_F10 > > + }; > > We don't seem to have B8 and F8 formats in in_fmts[]. Are they just missing > there or there is something else missing too? I will add B8 and F8 support in in_fmts[]. > > > + > > + if (is_stride_need_to_align(mfmt->pixelformat, fmts_pass1_main, > > + ARRAY_SIZE(fmts_pass1_main))) > > + bpl = mtk_dip_pass1_cal_main_stride(mfmt->width, > > + mfmt->pixelformat); > > + else if (is_stride_need_to_align(mfmt->pixelformat, fmts_pass1_pack, > > + ARRAY_SIZE(fmts_pass1_pack))) > > + bpl = mtk_dip_pass1_cal_pack_stride(mfmt->width, > > + mfmt->pixelformat); > > + else > > + bpl = dip_mdp_fmt_get_stride(mfmt, dfmt, plane); > > Please add the information about necessary alignment to struct > mtk_dip_dev_format instead of hardcoding in the local arrays above. I got it. > > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s:%s: plane(%d), pixelformat(%x) width(%d), stride(%d)", > > + __func__, pipe->desc->name, buf_name, plane, > > + mfmt->pixelformat, mfmt->width, bpl); > > + > > + return bpl; > > +} > > + > > +void mtk_dip_pipe_set_img_fmt(struct mtk_dip_pipe *pipe, > > The function name is confusing. "Set" in V4L2 sounds like changing the > active format. How about mtk_dip_pipe_try_fmt()? Yes. I will change it to mtk_dip_pipe_try_fmt(). > > > + struct mtk_dip_video_device *node, > > + struct v4l2_pix_format_mplane *mfmt_to_fill, > > This is quite a long name. It should be evident that this argument is an > output, so "fmt" should be good enough. I got it. > > > + const struct mtk_dip_dev_format *dev_fmt) > > +{ > > + int i; > > + > > + mfmt_to_fill->pixelformat = dev_fmt->format; > > + mfmt_to_fill->num_planes = dev_fmt->num_planes; > > + mfmt_to_fill->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; > > + mfmt_to_fill->quantization = V4L2_QUANTIZATION_DEFAULT; > > + mfmt_to_fill->colorspace = dev_fmt->colorspace; > > + mfmt_to_fill->field = V4L2_FIELD_NONE; > > + > > + memset(mfmt_to_fill->reserved, 0, sizeof(mfmt_to_fill->reserved)); > > The core already takes care of zeroing the reserved fields. I got it. > > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s:%s: Fmt(%c%c%c%c), w(%d),h(%d), f(%d)\n", > > + __func__, pipe->desc->name, node->desc->name, > > + mfmt_to_fill->pixelformat & 0xff, > > + mfmt_to_fill->pixelformat >> 8 & 0xff, > > + mfmt_to_fill->pixelformat >> 16 & 0xff, > > + mfmt_to_fill->pixelformat >> 24 & 0xff, > > + mfmt_to_fill->width, mfmt_to_fill->height, > > + mfmt_to_fill->field); > > No need for this print. There is already built in printing of formats in the > core when format-related ioctls are called. I got it. > > > + > > + for (i = 0; i < mfmt_to_fill->num_planes; ++i) { > > + u32 min_bpl = (mfmt_to_fill->width * dev_fmt->row_depth[i]) / 8; > > Shouldn't this use DIV_ROUND_UP()? I can see some row_depth not being a > multiple of 8. I will use DIV_ROUND_UP() here. > > > + u32 bpl = mfmt_to_fill->plane_fmt[i].bytesperline; > > In current V4L2 API, bytesperline is always set by the driver, so no need to > preserve what came from the userspace. I got it. > > > + u32 sizeimage; > > + > > + if (bpl < min_bpl) > > + bpl = min_bpl; > > + > > + sizeimage = (bpl * mfmt_to_fill->height * dev_fmt->depth[i]) > > + / dev_fmt->row_depth[i]; > > Shouldn't this be bpl * fmt->height? Row_depth is the bits of the pixel. Depth means the bytes per pixel of the image format. For example, Image: 640 * 480 YV12: row_depth = 8, depth = 12 Bytes per line = width * row_depth / 8 = 640 * 8/ 8 = 640 Image size = Bytes per line * height * (depth/ row_depth) = 640 * 480 * 1.5 > > > + mfmt_to_fill->plane_fmt[i].bytesperline = bpl; > > + if (mfmt_to_fill->plane_fmt[i].sizeimage < sizeimage) > > + mfmt_to_fill->plane_fmt[i].sizeimage = sizeimage; > > Same with sizeimage. It's defined to be always written by the driver. > > > + > > + memset(mfmt_to_fill->plane_fmt[i].reserved, > > + 0, sizeof(mfmt_to_fill->plane_fmt[i].reserved)); > > The core takes care of this already. I got it. > > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s:%s: plane(%d): bpl(%u), min_bpl(%u), s(%u)\n", > > + __func__, pipe->desc->name, node->desc->name, > > + i, bpl, min_bpl, mfmt_to_fill->plane_fmt[i].sizeimage); > > The core already has an appropriate debug message. I got it. > > > + } > > +} > > + > > +static void set_meta_fmt(struct mtk_dip_pipe *pipe, > > + struct v4l2_meta_format *metafmt_to_fill, > > + const struct mtk_dip_dev_format *dev_fmt) > > +{ > > + metafmt_to_fill->dataformat = dev_fmt->format; > > + > > + if (dev_fmt->buffer_size <= 0) { > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s: Invalid meta buf size(%u), use default(%u)\n", > > + pipe->desc->name, dev_fmt->buffer_size, > > + MTK_DIP_DEV_META_BUF_DEFAULT_SIZE); > > + > > + metafmt_to_fill->buffersize = > > + MTK_DIP_DEV_META_BUF_DEFAULT_SIZE; > > + } else { > > + metafmt_to_fill->buffersize = dev_fmt->buffer_size; > > + } > > +} > > + > > +void mtk_dip_pipe_load_default_fmt(struct mtk_dip_pipe *pipe, > > + struct mtk_dip_video_device *node, > > + struct v4l2_format *fmt_to_fill) > > +{ > > + int idx = node->desc->default_fmt_idx; > > + > > + if (node->desc->num_fmts == 0) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s:%s: desc->num_fmts is 0, no format support list\n", > > + __func__, node->desc->name); > > + > > + return; > > + } > > Is this even possible? No. I will remove the check. > > > + > > + if (idx >= node->desc->num_fmts) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s:%s: invalid idx(%d), must < num_fmts(%d)\n", > > + __func__, node->desc->name, idx, node->desc->num_fmts); > > + > > + idx = 0; > > + } > > Is this possible too? No. I will remove the check. > > > + > > + fmt_to_fill->type = node->desc->buf_type; > > + if (mtk_dip_buf_is_meta(node->desc->buf_type)) { > > + set_meta_fmt(pipe, &fmt_to_fill->fmt.meta, > > + &node->desc->fmts[idx]); > > + } else { > > + fmt_to_fill->fmt.pix_mp.width = node->desc->default_width; > > + fmt_to_fill->fmt.pix_mp.height = node->desc->default_height; > > + mtk_dip_pipe_set_img_fmt(pipe, node, &fmt_to_fill->fmt.pix_mp, > > + &node->desc->fmts[idx]); > > + } > > +} > > + > > +const struct mtk_dip_dev_format* > > +mtk_dip_pipe_find_fmt(struct mtk_dip_pipe *pipe, > > + struct mtk_dip_video_device *node, > > + u32 format) > > +{ > > + int i; > > + > > + for (i = 0; i < node->desc->num_fmts; i++) { > > + if (node->desc->fmts[i].format == format) > > + return &node->desc->fmts[i]; > > + } > > + > > + return NULL; > > +} > > + > > +static enum mdp_ycbcr_profile > > +map_ycbcr_prof_mplane(struct v4l2_pix_format_mplane *pix_mp, u32 mdp_color) > > +{ > > + if (MDP_COLOR_IS_RGB(mdp_color)) > > + return MDP_YCBCR_PROFILE_FULL_BT601; > > Similar comment as below. > > > + > > + switch (pix_mp->colorspace) { > > + case V4L2_COLORSPACE_JPEG: > > + return MDP_YCBCR_PROFILE_JPEG; > > + case V4L2_COLORSPACE_REC709: > > + case V4L2_COLORSPACE_DCI_P3: > > + if (pix_mp->quantization == V4L2_QUANTIZATION_FULL_RANGE) > > + return MDP_YCBCR_PROFILE_FULL_BT709; > > + return MDP_YCBCR_PROFILE_BT709; > > + case V4L2_COLORSPACE_BT2020: > > + if (pix_mp->quantization == V4L2_QUANTIZATION_FULL_RANGE) > > + return MDP_YCBCR_PROFILE_FULL_BT2020; > > + return MDP_YCBCR_PROFILE_BT2020; > > + } > > + /* V4L2_COLORSPACE_SRGB or else */ > > + if (pix_mp->quantization == V4L2_QUANTIZATION_FULL_RANGE) > > + return MDP_YCBCR_PROFILE_FULL_BT601; > > + > > + return MDP_YCBCR_PROFILE_BT601; > > +} > > + > > +static inline int is_contig_mp_buffer(struct mtk_dip_dev_buffer *dev_buf) > > +{ > > + return !(MDP_COLOR_GET_PLANE_COUNT(dev_buf->dev_fmt->mdp_color) == 1); > > +} > > + > > +static int fill_ipi_img_param_mp(struct mtk_dip_pipe *pipe, > > + struct img_image_buffer *b, > > + struct mtk_dip_dev_buffer *dev_buf, > > + char *buf_name) > > Please prefix the functions with mtk_dip_. I got it. > > > +{ > > + struct v4l2_pix_format_mplane *pix_mp; > > + const struct mtk_dip_dev_format *mdp_fmt; > > + unsigned int i; > > + unsigned int total_plane_size = 0; > > + > > + if (!dev_buf->dev_fmt) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s: %s's dev format not set\n", > > + __func__, buf_name); > > + return -EINVAL; > > + } > > Is this even possible? No. I will remove the check. > > > + > > + pix_mp = &dev_buf->fmt.fmt.pix_mp; > > + mdp_fmt = dev_buf->dev_fmt; > > + > > + b->usage = dev_buf->dma_port; > > + b->format.colorformat = dev_buf->dev_fmt->mdp_color; > > + b->format.width = dev_buf->fmt.fmt.pix_mp.width; > > + b->format.height = dev_buf->fmt.fmt.pix_mp.height; > > + b->format.ycbcr_prof = > > + map_ycbcr_prof_mplane(pix_mp, > > + dev_buf->dev_fmt->mdp_color); > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s: buf(%s), IPI: w(%d),h(%d),c(0x%x)\n", > > + pipe->desc->name, > > + buf_name, > > + b->format.width, > > + b->format.height, > > + b->format.colorformat); > > + > > + for (i = 0; i < pix_mp->num_planes; ++i) { > > + u32 stride = mtk_dip_pipe_get_stride(pipe, pix_mp, mdp_fmt, > > + i, buf_name); > > Shouldn't stride be just equal to pix_mp.plane[i].bytesperline? The stride here is specific for MDP hardware (which uses the same MDP stride setting for NV12 and NV12M): bytesperline = width * row_depth / 8 MDP stride = width * MDP_COLOR_BITS_PER_PIXEL /8 > > > + > > + b->format.plane_fmt[i].stride = stride; > > + b->format.plane_fmt[i].size = > > Shouldn't size be just equal to pix_mp.plane[i].sizeimage? Yes. I will move the actual size calculation codes to set/try format. > > > + dip_mdp_fmt_get_plane_size(mdp_fmt, stride, > > + pix_mp->height, i); > > + b->iova[i] = dev_buf->isp_daddr[i]; > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "Non-contiguous-mp-buf:plane(%i),stride(%d),size(%d),iova(%lx)", > > + i, > > + b->format.plane_fmt[i].stride, > > + b->format.plane_fmt[i].size, > > + b->iova[i]); > > + total_plane_size += b->format.plane_fmt[i].size; > > + } > > + > > + if (!is_contig_mp_buffer(dev_buf)) { > > Shouldn't this be just (pix_mp->num_planes > 1)? is_contig_mp_buffer is use to check color planes count so I can't use pix_mp->num_planes here. I will add num_cplanes feild to mtk_dip_dev_format and to check num_cplanes instead. > > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "Non-contiguous-mp-buf(%s),total-plane-size(%d),dma_port(%d)\n", > > + buf_name, > > + total_plane_size, > > + b->usage); > > + return 0; > > + } > > + > > + for (; i < MDP_COLOR_GET_PLANE_COUNT(b->format.colorformat); ++i) { > > I don't see these MDP_ macros defined anywhere. Please don't use macros > defined from other drivers. We can embed this information in the > mtk_dip_dev_format struct. One would normally call it num_cplanes (color > planes). > > However, I would just make this driver support M formats only and forget > about formats with only memory planes count != color planes count. Since the non-M formats are still used by 8183's user lib now, may I add num_cplanes and support the both formats? > > > + u32 stride = dip_mdp_fmt_get_stride_contig > > + (mdp_fmt, b->format.plane_fmt[0].stride, i); > > + > > + b->format.plane_fmt[i].stride = stride; > > + b->format.plane_fmt[i].size = > > + dip_mdp_fmt_get_plane_size(mdp_fmt, stride, > > + pix_mp->height, i); > > + b->iova[i] = b->iova[i - 1] + b->format.plane_fmt[i - 1].size; > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "Contiguous-mp-buf:plane(%i),stride(%d),size(%d),iova(%lx)", > > + i, > > + b->format.plane_fmt[i].stride, > > + b->format.plane_fmt[i].size, > > + b->iova[i]); > > + total_plane_size += b->format.plane_fmt[i].size; > > + } > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "Contiguous-mp-buf(%s),v4l2-sizeimage(%d),total-plane-size(%d)\n", > > + buf_name, > > + pix_mp->plane_fmt[0].sizeimage, > > + total_plane_size); > > + > > + return 0; > > +} > > + > > +static int fill_input_ipi_param(struct mtk_dip_pipe *pipe, > > + struct img_input *iin, > > + struct mtk_dip_dev_buffer *dev_buf, > > + char *buf_name) > > +{ > > + struct img_image_buffer *img = &iin->buffer; > > + > > + return fill_ipi_img_param_mp(pipe, img, dev_buf, > > + buf_name); > > +} > > + > > +static int fill_output_ipi_param(struct mtk_dip_pipe *pipe, > > + struct img_output *iout, > > + struct mtk_dip_dev_buffer *dev_buf_out, > > + struct mtk_dip_dev_buffer *dev_buf_in, > > + char *buf_name) > > +{ > > + int ret; > > + struct img_image_buffer *img = &iout->buffer; > > + > > + ret = fill_ipi_img_param_mp(pipe, img, dev_buf_out, > > + buf_name); > > + iout->crop.left = 0; > > + iout->crop.top = 0; > > + iout->crop.width = dev_buf_in->fmt.fmt.pix_mp.width; > > + iout->crop.height = dev_buf_in->fmt.fmt.pix_mp.height; > > + iout->crop.left_subpix = 0; > > + iout->crop.top_subpix = 0; > > + iout->crop.width_subpix = 0; > > + iout->crop.height_subpix = 0; > > So we don't support cropping? DIP support cropping, I will add the support in the next patch. > > > + iout->rotation = dev_buf_out->rotation; > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s: buf(%s) IPI-ext:c_l(%d),c_t(%d),c_w(%d),c_h(%d)\n", > > + pipe->desc->name, > > + buf_name, > > + iout->crop.left, > > + iout->crop.top, > > + iout->crop.width, > > + iout->crop.height); > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "c_ls(%d),c_ts(%d),c_ws(%d),c_hs(%d),rot(%d)\n", > > + iout->crop.left_subpix, > > + iout->crop.top_subpix, > > + iout->crop.width_subpix, > > + iout->crop.height_subpix, > > + iout->rotation); > > + > > + return ret; > > +} > > + > > +void mtk_dip_pipe_ipi_params_config(struct mtk_dip_request *req) > > +{ > > + struct mtk_dip_pipe *pipe = req->dip_pipe; > > + struct platform_device *pdev = pipe->dip_dev->pdev; > > + struct mtk_dip_pipe_job_info *pipe_job_info = &req->job_info; > > + int out_img_buf_idx; > > + int in_img_buf_idx; > > + struct img_ipi_frameparam *dip_param = &req->img_fparam.frameparam; > > + struct mtk_dip_dev_buffer *dev_buf_in; > > + struct mtk_dip_dev_buffer *dev_buf_out; > > + struct mtk_dip_dev_buffer *dev_buf_tuning; > > + int i = 0; > > + int mdp_ids[2] = {MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE, > > + MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE}; > > + char *mdp_names[2] = {"mdp0", "mdp1"}; > > + > > + dev_dbg(&pdev->dev, > > + "%s:%s: pipe-job id(%d)\n", > > + __func__, pipe->desc->name, > > + pipe_job_info->id); > > + > > + /* Fill ipi params for DIP driver */ > > + memset(dip_param, 0, sizeof(*dip_param)); > > + dip_param->index = pipe_job_info->id; > > + dip_param->type = STREAM_ISP_IC; > > + > > + /* Tuning buffer */ > > + dev_buf_tuning = > > + pipe_job_info->buf_map[MTK_DIP_VIDEO_NODE_ID_TUNING_OUT]; > > + if (dev_buf_tuning) { > > + dev_dbg(&pdev->dev, > > + "Tuning buf queued: scp_daddr(%pad),isp_daddr(%pad)\n", > > + &dev_buf_tuning->scp_daddr[0], > > + &dev_buf_tuning->isp_daddr[0]); > > + dip_param->tuning_data.pa = > > + (uint32_t)dev_buf_tuning->scp_daddr[0]; > > + dip_param->tuning_data.present = true; > > + dip_param->tuning_data.iova = > > + (uint32_t)dev_buf_tuning->isp_daddr[0]; > > Why are these casts needed? This structure is shared between CPU and scp and the pa and iova is defined as 32bits fields. struct tuning_addr { u32 present; u32 pa; /* Used by CM4 access */ u32 iova; /* Used by IOMMU HW access */ } __attribute__ ((__packed__)); > > > + } else { > > + dev_dbg(&pdev->dev, > > + "No enqueued tuning buffer: scp_daddr(%llx),present(%llx),isp_daddr(%llx\n", > > + dip_param->tuning_data.pa, > > + dip_param->tuning_data.present, > > + dip_param->tuning_data.iova); > > + } > > + > > + in_img_buf_idx = 0; > > + > > + /* Raw-in buffer */ > > + dev_buf_in = > > + pipe_job_info->buf_map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT]; > > + if (dev_buf_in) { > > + struct img_input *iin = &dip_param->inputs[in_img_buf_idx]; > > + > > + fill_input_ipi_param(pipe, iin, dev_buf_in, "RAW"); > > + in_img_buf_idx++; > > + } > > Is it possible that we don't have an input buffer? No. It is guaranteed by .request_validate(). I will remove the check here. > > > + > > + /* Array of MDP buffers */ > > + out_img_buf_idx = 0; > > + > > + for (i = 0; i < ARRAY_SIZE(mdp_ids); i++) { > > + dev_buf_out = > > + pipe_job_info->buf_map[mdp_ids[i]]; > > + if (dev_buf_out) { > > + struct img_output *iout = > > + &dip_param->outputs[out_img_buf_idx]; > > + > > + fill_output_ipi_param(pipe, iout, dev_buf_out, > > + dev_buf_in, mdp_names[i]); > > + out_img_buf_idx++; > > + } > > + } > > + > > + dip_param->num_outputs = out_img_buf_idx; > > + dip_param->num_inputs = in_img_buf_idx; > > Wouldn't this be always 1? I will add another 2 input nodes in the next patch to support advance 3A feature, for example, the shading. > > > +} > > + > > +void mtk_dip_pipe_try_enqueue(struct mtk_dip_pipe *pipe) > > +{ > > + struct mtk_dip_pipe_job_info *job_info; > > + struct mtk_dip_pipe_job_info *tmp_job_info; > > + struct list_head enqueue_job_list; > > + > > + INIT_LIST_HEAD(&enqueue_job_list); > > You can merge this with the declaration by using > > > + if (!pipe->streaming) > > + return; > > + > > + spin_lock(&pipe->job_lock); > > + list_for_each_entry_safe(job_info, tmp_job_info, > > + &pipe->pipe_job_pending_list, > > + list) { > > + list_del(&job_info->list); > > + pipe->num_pending_jobs--; > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s: current num of pending jobs(%d)\n", > > + __func__, pipe->desc->name, > > + pipe->num_pending_jobs); > > + list_add_tail(&job_info->list, > > + &enqueue_job_list); > > + } > > + spin_unlock(&pipe->job_lock); > > + > > + list_for_each_entry_safe(job_info, tmp_job_info, > > + &enqueue_job_list, > > + list) { > > + struct mtk_dip_request *req = > > + mtk_dip_pipe_job_info_to_req(job_info); > > + > > + list_del(&job_info->list); > > + > > + spin_lock(&pipe->job_lock); > > + list_add_tail(&job_info->list, > > + &pipe->pipe_job_running_list); > > + pipe->num_jobs++; > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s: current num of running jobs(%d)\n", > > + __func__, pipe->desc->name, > > + pipe->num_jobs); > > + spin_unlock(&pipe->job_lock); > > + > > + mtk_dip_hw_enqueue(&pipe->dip_dev->dip_hw, req); > > + } > > Please check my comments to the P1 RFCv3 for a similar block of code. I will change the code as following: spin_lock(&pipe->job_lock); list_for_each_entry_safe(job_info, tmp_job_info, &pipe->pipe_job_pending_list, list) { struct mtk_dip_request *req; list_del(&job_info->list); pipe->num_pending_jobs--; req = mtk_dip_pipe_job_info_to_req(job_info); mtk_dip_hw_enqueue(&pipe->dip_dev->dip_hw, req); } spin_unlock(&pipe->job_lock); > > > +} > > diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h > > new file mode 100644 > > index 000000000000..e3372c291f9a > > --- /dev/null > > +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h > > @@ -0,0 +1,337 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * Copyright (c) 2018 MediaTek Inc. > > + * > > + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > + * > > + */ > > + > > +#ifndef _MTK_DIP_DEV_H_ > > +#define _MTK_DIP_DEV_H_ > > + > > +#include <linux/types.h> > > +#include <linux/platform_device.h> > > +#include <media/v4l2-ctrls.h> > > +#include <media/v4l2-subdev.h> > > +#include <media/v4l2-device.h> > > +#include <linux/videodev2.h> > > +#include <media/videobuf2-core.h> > > +#include <media/videobuf2-v4l2.h> > > + > > +#include "mtk_dip-hw.h" > > + > > +#define MTK_DIP_PIPE_ID_PREVIEW 0 > > +#define MTK_DIP_PIPE_ID_CAPTURE 1 > > +#define MTK_DIP_PIPE_ID_REPROCESS 2 > > +#define MTK_DIP_PIPE_ID_TOTAL_NUM 3 > > + > > +#define MTK_DIP_VIDEO_NODE_ID_RAW_OUT 0 > > +#define MTK_DIP_VIDEO_NODE_ID_TUNING_OUT 1 > > +#define MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM 2 > > +#define MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE 2 > > +#define MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE 3 > > +#define MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM 2 > > +#define MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM \ > > + (MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM + \ > > + MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM) > > + > > +#define MTK_DIP_VIDEO_NODE_ID_NO_MASTER -1 > > + > > +#define MTK_DIP_OUTPUT_MIN_WIDTH 2U > > +#define MTK_DIP_OUTPUT_MIN_HEIGHT 2U > > +#define MTK_DIP_OUTPUT_MAX_WIDTH 5376U > > +#define MTK_DIP_OUTPUT_MAX_HEIGHT 4032U > > +#define MTK_DIP_CAPTURE_MIN_WIDTH 2U > > +#define MTK_DIP_CAPTURE_MIN_HEIGHT 2U > > +#define MTK_DIP_CAPTURE_MAX_WIDTH 5376U > > +#define MTK_DIP_CAPTURE_MAX_HEIGHT 4032U > > + > > +#define MTK_DIP_DEV_DIP_MEDIA_MODEL_NAME "MTK-ISP-DIP-V4L2" > > +#define MTK_DIP_DEV_DIP_PREVIEW_NAME \ > > + MTK_DIP_DEV_DIP_MEDIA_MODEL_NAME > > +#define MTK_DIP_DEV_DIP_CAPTURE_NAME "MTK-ISP-DIP-CAP-V4L2" > > +#define MTK_DIP_DEV_DIP_REPROCESS_NAME "MTK-ISP-DIP-REP-V4L2" > > Could we have a bit more user friendly names here? For example: > > Driver name: "mtk-cam-dip" > Preview pipe: "%s %s", dev_driver_string(), "preview" > Capture pipe: "%s %s", dev_driver_string(), "capture" > Preview pipe: "%s %s", dev_driver_string(), "reprocess" > > (For reference, I suggested "mtk-cam-p1" for P1, so that would be consistent > with the above.) Yes, I will use mtk-cam-dip instead. > > > + > > +#define MTK_DIP_DEV_META_BUF_DEFAULT_SIZE (1024 * 128) > > +#define MTK_DIP_DEV_META_BUF_POOL_MAX_SIZE (1024 * 1024 * 6) > > + > > +#define V4L2_CID_MTK_DIP_MAX 100 > > Why 100? I think we just have 1 rotation control. Please just use 1 > explicitly in the code, without this intermediate constant. I got it. I will use only 1. > > > + > > +enum mtk_dip_pixel_mode { > > + mtk_dip_pixel_mode_default = 0, > > + mtk_dip_pixel_mode_1, > > + mtk_dip_pixel_mode_2, > > + mtk_dip_pixel_mode_4, > > + mtk_dip_pixel_mode_num, > > +}; > > This doesn't seem to be used anywhere. I will remove them. > > > + > > +struct mtk_dip_dev_format { > > + u32 format; > > + u32 mdp_color; > > + u32 colorspace; > > + u8 depth[VIDEO_MAX_PLANES]; > > + u8 row_depth[VIDEO_MAX_PLANES]; > > + u8 num_planes; > > + u8 walign; > > + u8 halign; > > + u8 salign; > > + u32 flags; > > + u32 buffer_size; > > +}; > > Please document all the structures defined in the driver using kerneldoc. I got it. > > > + > > +struct mtk_dip_pipe_job_info { > > + int id; > > + struct mtk_dip_dev_buffer* > > + buf_map[MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM]; > > + struct list_head list; > > +}; > > Is there any reason to separate this from mtk_dip_request? I will move the content of mtk_dip_pipe_job_info to mtk_dip_request. > > > + > > +struct mtk_dip_dev_buffer { > > + struct vb2_v4l2_buffer vbb; > > + struct v4l2_format fmt; > > + const struct mtk_dip_dev_format *dev_fmt; > > + int pipe_job_id; > > + dma_addr_t isp_daddr[VB2_MAX_PLANES]; > > + dma_addr_t scp_daddr[VB2_MAX_PLANES]; > > + unsigned int dma_port; > > + int rotation; > > + struct list_head list; > > +}; > > + > > +struct mtk_dip_pipe_desc { > > + char *name; > > Shouldn't this be const char *? I got it. > > > + int master; > > + int id; > > + const struct mtk_dip_video_device_desc *output_queue_descs; > > + int total_output_queues; > > + const struct mtk_dip_video_device_desc *capture_queue_descs; > > + int total_capture_queues; > > +}; > > + > > +struct mtk_dip_video_device_desc { > > + int id; > > + char *name; > > Shouldn't this be const char *? I got it. > > > + u32 buf_type; > > + u32 cap; > > + int smem_alloc; > > + const struct mtk_dip_dev_format *fmts; > > + int num_fmts; > > + char *description; > > Shouldn't this be const char *? I got it. > > > + int default_width; > > + int default_height; > > + unsigned int dma_port; > > + const struct v4l2_frmsizeenum *frmsizeenum; > > + const struct v4l2_ioctl_ops *ops; > > + u32 flags; > > + int default_fmt_idx; > > +}; > > + > > +struct mtk_dip_dev_queue { > > + struct vb2_queue vbq; > > + /* Serializes vb2 queue and video device operations */ > > + struct mutex lock; > > + const struct mtk_dip_dev_format *dev_fmt; > > + int rotation; > > +}; > > + > > +struct mtk_dip_video_device { > > + struct video_device vdev; > > + struct mtk_dip_dev_queue dev_q; > > + struct v4l2_format vdev_fmt; > > + struct media_pad vdev_pad; > > + struct v4l2_mbus_framefmt pad_fmt; > > + struct v4l2_ctrl_handler ctrl_handler; > > + u32 flags; > > + const struct mtk_dip_video_device_desc *desc; > > + atomic_t sequence; > > + struct list_head buf_list; > > + /* protect the in-device buffer list */ > > + spinlock_t buf_list_lock; > > +}; > > + > > +struct mtk_dip_pipe { > > + struct mtk_dip_dev *dip_dev; > > + struct mtk_dip_video_device nodes[MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM]; > > + int num_nodes; > > + atomic_t cnt_nodes_not_streaming; > > + int streaming; > > + struct media_pad *subdev_pads; > > + struct media_pipeline pipeline; > > + struct v4l2_subdev subdev; > > + struct v4l2_subdev_fh *fh; > > + atomic_t pipe_job_sequence; > > + struct list_head pipe_job_pending_list; > > + int num_pending_jobs; > > + struct list_head pipe_job_running_list; > > + int num_jobs; > > + /* Serializes pipe's stream on/off and buffers enqueue operations */ > > + struct mutex lock; > > + spinlock_t job_lock; /* protect the pipe job list */ > > + const struct mtk_dip_pipe_desc *desc; > > +}; > > + > > +struct mtk_dip_dev { > > + struct platform_device *pdev; > > + struct media_device mdev; > > + struct v4l2_device v4l2_dev; > > + struct mtk_dip_pipe dip_pipe[MTK_DIP_PIPE_ID_TOTAL_NUM]; > > + struct mtk_dip_hw dip_hw; > > nit: There isn't much benefit from having the separate mtk_dip_hw struct > here. On the contrary it causes long dereference chains, which only clutter > the code, e.g. "&pipe->dip_dev->dip_hw.scp_pdev->dev". I will move the fields of mtk_dip_hw to struct mtk_dip_dev. > > > +}; > > + > > +struct mtk_dip_request { > > + struct media_request req; > > + struct mtk_dip_pipe *dip_pipe; > > + struct mtk_dip_pipe_job_info job_info; > > Is there a need to have mtk_dip_pipe_job_info as a separate struct rather > than just having the fields here? I will move the fields of mtk_dip_pipe_job_info to struct mtk_dip_request. > > > + struct img_frameparam img_fparam; > > + struct work_struct fw_work; > > + struct work_struct mdp_work; > > + /* It is used only in timeout handling flow */ > > + struct work_struct mdpcb_work; > > + struct mtk_dip_hw_subframe *working_buf; > > + atomic_t buf_count; > > +}; > > + > > +int mtk_dip_dev_media_register(struct device *dev, > > + struct media_device *media_dev, > > + const char *model); > > + > > +void mtk_dip_dev_v4l2_release(struct mtk_dip_dev *dip_dev); > > + > > +int mtk_dip_dev_v4l2_register(struct device *dev, > > + struct media_device *media_dev, > > + struct v4l2_device *v4l2_dev); > > + > > +int mtk_dip_pipe_v4l2_register(struct mtk_dip_pipe *pipe, > > + struct media_device *media_dev, > > + struct v4l2_device *v4l2_dev); > > + > > +void mtk_dip_pipe_v4l2_unregister(struct mtk_dip_pipe *pipe); > > + > > +int mtk_dip_pipe_queue_buffers(struct media_request *req, int initial); > > + > > +int mtk_dip_pipe_init(struct mtk_dip_pipe *pipe, > > + struct mtk_dip_dev *dip_dev, > > + const struct mtk_dip_pipe_desc *setting, > > + struct media_device *media_dev, > > + struct v4l2_device *v4l2_dev); > > + > > +void mtk_dip_pipe_ipi_params_config(struct mtk_dip_request *req); > > + > > +int mtk_dip_pipe_release(struct mtk_dip_pipe *pipe); > > + > > +struct mtk_dip_pipe_job_info * > > +mtk_dip_pipe_get_running_job_info(struct mtk_dip_pipe *pipe, > > + int pipe_job_id); > > + > > +int mtk_dip_pipe_next_job_id(struct mtk_dip_pipe *pipe); > > + > > +void mtk_dip_pipe_debug_job(struct mtk_dip_pipe *pipe, > > + struct mtk_dip_pipe_job_info *pipe_job_info); > > + > > +int mtk_dip_pipe_job_finish(struct mtk_dip_pipe *pipe, > > + unsigned int pipe_job_info_id, > > + enum vb2_buffer_state state); > > + > > +const struct mtk_dip_dev_format * > > +mtk_dip_pipe_find_fmt(struct mtk_dip_pipe *pipe, > > + struct mtk_dip_video_device *node, > > + u32 format); > > + > > +void mtk_dip_pipe_set_img_fmt(struct mtk_dip_pipe *pipe, > > + struct mtk_dip_video_device *node, > > + struct v4l2_pix_format_mplane *mfmt_to_fill, > > + const struct mtk_dip_dev_format *dev_fmt); > > + > > +void mtk_dip_pipe_load_default_fmt(struct mtk_dip_pipe *pipe, > > + struct mtk_dip_video_device *node, > > + struct v4l2_format *fmt_to_fill); > > + > > +void mtk_dip_pipe_try_enqueue(struct mtk_dip_pipe *pipe); > > + > > +void mtk_dip_hw_enqueue(struct mtk_dip_hw *dip_hw, struct mtk_dip_request *req); > > + > > +int mtk_dip_hw_streamoff(struct mtk_dip_pipe *pipe); > > + > > +int mtk_dip_hw_streamon(struct mtk_dip_pipe *pipe); > > + > > +static inline struct mtk_dip_pipe* > > +mtk_dip_dev_get_pipe(struct mtk_dip_dev *dip_dev, unsigned int pipe_id) > > +{ > > + if (pipe_id < 0 && pipe_id >= MTK_DIP_PIPE_ID_TOTAL_NUM) > > + return NULL; > > + > > + return &dip_dev->dip_pipe[pipe_id]; > > +} > > + > > +static inline struct mtk_dip_video_device* > > +mtk_dip_file_to_node(struct file *file) > > +{ > > + return container_of(video_devdata(file), > > + struct mtk_dip_video_device, vdev); > > +} > > + > > +static inline struct mtk_dip_pipe* > > +mtk_dip_subdev_to_pipe(struct v4l2_subdev *sd) > > +{ > > + return container_of(sd, struct mtk_dip_pipe, subdev); > > +} > > + > > +static inline struct mtk_dip_dev* > > +mtk_dip_mdev_to_dev(struct media_device *mdev) > > +{ > > + return container_of(mdev, struct mtk_dip_dev, mdev); > > +} > > + > > +static inline struct mtk_dip_video_device* > > +mtk_dip_vbq_to_node(struct vb2_queue *vq) > > +{ > > + return container_of(vq, struct mtk_dip_video_device, dev_q.vbq); > > +} > > + > > +static inline struct mtk_dip_dev_buffer* > > +mtk_dip_vb2_buf_to_dev_buf(struct vb2_buffer *vb) > > +{ > > + return container_of(vb, struct mtk_dip_dev_buffer, vbb.vb2_buf); > > +} > > + > > +static inline struct mtk_dip_dev *mtk_dip_hw_to_dev(struct mtk_dip_hw *dip_hw) > > +{ > > + return container_of(dip_hw, struct mtk_dip_dev, dip_hw); > > +} > > + > > +static inline struct mtk_dip_request* > > +mtk_dip_pipe_job_info_to_req(struct mtk_dip_pipe_job_info *job_info) > > +{ > > + return container_of(job_info, struct mtk_dip_request, job_info); > > +} > > + > > +static inline struct mtk_dip_request* > > +mtk_dip_hw_fw_work_to_req(struct work_struct *fw_work) > > +{ > > + return container_of(fw_work, struct mtk_dip_request, fw_work); > > +} > > + > > +static inline struct mtk_dip_request* > > +mtk_dip_hw_mdp_work_to_req(struct work_struct *mdp_work) > > +{ > > + return container_of(mdp_work, struct mtk_dip_request, mdp_work); > > +} > > + > > +static inline struct mtk_dip_request * > > +mtk_dip_hw_mdpcb_work_to_req(struct work_struct *mdpcb_work) > > +{ > > + return container_of(mdpcb_work, struct mtk_dip_request, mdpcb_work); > > +} > > + > > +static inline int mtk_dip_buf_is_meta(u32 type) > > +{ > > + return type == V4L2_BUF_TYPE_META_CAPTURE || > > + type == V4L2_BUF_TYPE_META_OUTPUT; > > +} > > + > > +static inline int mtk_dip_pipe_get_pipe_from_job_id(int pipe_job_id) > > +{ > > + return (pipe_job_id >> 16) & 0x0000FFFF; > > Please use lowercase for hex numbers. I got it. > > > +} > > + > > +#endif /* _MTK_DIP_DEV_H_ */ > > diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h > > new file mode 100644 > > index 000000000000..2dd4dae4336c > > --- /dev/null > > +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h > > @@ -0,0 +1,155 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * Copyright (c) 2018 MediaTek Inc. > > + * > > + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > + * Holmes Chiou <holmes.chiou-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > + * > > + */ > > + > > +#ifndef _MTK_DIP_HW_H_ > > +#define _MTK_DIP_HW_H_ > > + > > +#include <linux/clk.h> > > +#include "mtk-img-ipi.h" > > + > > +#define DIP_COMPOSER_THREAD_TIMEOUT 16U > > Unused. I will remove it. > > > +#define DIP_COMPOSING_MAX_NUM 3 > > +#define DIP_MAX_ERR_COUNT 188U > > +#define DIP_FLUSHING_WQ_TIMEOUT (16U * DIP_MAX_ERR_COUNT) > > Any rationale behind this particular numbers? Please add comments explaining > them. I would like to adjust the time out value to 1000 / 30 * (DIP_COMPOSING_MAX_NUM) * 3. To wait 3 times of expected frame time (@30fps) in the worst case (max number of jobs in SCP). > > > + > > +#define DIP_FRM_SZ (76 * 1024) > > +#define DIP_SUB_FRM_SZ (16 * 1024) > > +#define DIP_TUNING_SZ (32 * 1024) > > +#define DIP_COMP_SZ (24 * 1024) > > +#define DIP_FRAMEPARAM_SZ (4 * 1024) > > + > > +#define DIP_TUNING_OFFSET DIP_SUB_FRM_SZ > > +#define DIP_COMP_OFFSET (DIP_TUNING_OFFSET + DIP_TUNING_SZ) > > +#define DIP_FRAMEPARAM_OFFSET (DIP_COMP_OFFSET + DIP_COMP_SZ) > > +#define DIP_SUB_FRM_DATA_NUM 32 > > +#define DIP_SCP_WORKINGBUF_OFFSET (5 * 1024 * 1024) > > What is this offset? It's 5 MB, which is 2x bigger than the total frame data > (32 * 76 * 1024). I will remove the offset since there is no need now. > > > +#define DIP_V4l2_META_BUF_OFFSET (DIP_SCP_WORKINGBUF_OFFSET + \ > > Please use only uppsercase in macro names. That said, this macro isn't used > anywhere. I got it. > > > + DIP_SUB_FRM_DATA_NUM * DIP_FRM_SZ) > > + > > +#define MTK_DIP_CLK_NUM 2 > > + > > +enum STREAM_TYPE_ENUM { > > + STREAM_UNKNOWN, > > + STREAM_BITBLT, > > + STREAM_GPU_BITBLT, > > + STREAM_DUAL_BITBLT, > > + STREAM_2ND_BITBLT, > > + STREAM_ISP_IC, > > + STREAM_ISP_VR, > > + STREAM_ISP_ZSD, > > + STREAM_ISP_IP, > > + STREAM_ISP_VSS, > > + STREAM_ISP_ZSD_SLOW, > > + STREAM_WPE, > > + STREAM_WPE2, > > +}; > > + > > +enum mtk_dip_hw_user_state { > > + DIP_STATE_INIT = 0, > > + DIP_STATE_OPENED, > > + DIP_STATE_STREAMON, > > + DIP_STATE_STREAMOFF > > +}; > > Are these 2 enums above a part of the firmware ABI? enum STREAM_TYPE_ENUM is the firmware ABI. enum mtk_dip_hw_user_state was phased out in SCP firmware part and I will remove it. > > > + > > +struct mtk_dip_hw_working_buf { > > + dma_addr_t scp_daddr; > > + void *vaddr; > > + dma_addr_t isp_daddr; > > +}; > > + > > +struct mtk_dip_hw_subframe { > > + struct mtk_dip_hw_working_buf buffer; > > + int size; > > + struct mtk_dip_hw_working_buf config_data; > > + struct mtk_dip_hw_working_buf tuning_buf; > > + struct mtk_dip_hw_working_buf frameparam; > > + struct list_head list_entry; > > +}; > > + > > +enum frame_state { > > + FRAME_STATE_INIT = 0, > > + FRAME_STATE_COMPOSING, > > + FRAME_STATE_RUNNING, > > + FRAME_STATE_DONE, > > + FRAME_STATE_STREAMOFF, > > + FRAME_STATE_ERROR, > > + FRAME_STATE_HW_TIMEOUT > > +}; > > Are these values a part of the firmware ABI? If so, they should be defined > as macros, with explicit values assigned. Yes, they are firmware ABI. I will use macros instead. > > > + > > +struct mtk_dip_hw_working_buf_list { > > + struct list_head list; > > + u32 cnt; > > + spinlock_t lock; /* protect the list and cnt */ > > + > > +}; > > + > > +struct mtk_dip_hw { > > + struct clk_bulk_data clks[MTK_DIP_CLK_NUM]; > > + struct workqueue_struct *composer_wq; > > + struct workqueue_struct *mdp_wq; > > + wait_queue_head_t working_buf_wq; > > + wait_queue_head_t flushing_wq; > > + wait_queue_head_t flushing_hw_wq; > > + atomic_t num_composing; /* increase after ipi */ > > + /* increase after calling MDP driver */ > > + atomic_t num_running; > > + /*MDP/GCE callback workqueue */ > > + struct workqueue_struct *mdpcb_workqueue; > > + /* for MDP driver */ > > + struct platform_device *mdp_pdev; > > + /* for SCP driver */ > > + struct platform_device *scp_pdev; > > + struct rproc *rproc_handle; > > + struct mtk_dip_hw_working_buf_list dip_freebufferlist; > > + struct mtk_dip_hw_working_buf_list dip_usedbufferlist; > > + dma_addr_t working_buf_mem_scp_daddr; > > + void *working_buf_mem_vaddr; > > + dma_addr_t working_buf_mem_isp_daddr; > > + int working_buf_mem_size; > > + struct mtk_dip_hw_subframe working_buf[DIP_SUB_FRM_DATA_NUM]; > > + /* increase after enqueue */ > > + atomic_t dip_enque_cnt; > > + /* increase after stream on, decrease when stream off */ > > + atomic_t dip_stream_cnt; > > + /* To serialize request opertion to DIP co-procrosser and hadrware */ > > + struct mutex hw_op_lock; > > + /* To restrict the max number of request be send to SCP */ > > + struct semaphore sem; > > +}; > > + > > +static inline void > > +mtk_dip_wbuf_to_ipi_img_sw_addr(struct img_sw_addr *ipi_addr, > > + struct mtk_dip_hw_working_buf *wbuf) > > +{ > > + ipi_addr->va = (u64)wbuf->vaddr; > > Why would IPI need VA? Actually, we shouldn't even pass kernel pointers to > the firmware for security reasons. I got it. I will remove the va from ipi_addr. > > > + ipi_addr->pa = (u32)wbuf->scp_daddr; > > +} > > + > > +static inline void > > +mtk_dip_wbuf_to_ipi_img_addr(struct img_addr *ipi_addr, > > + struct mtk_dip_hw_working_buf *wbuf) > > +{ > > + ipi_addr->va = (u64)wbuf->vaddr; > > Ditto. > > > + ipi_addr->pa = (u32)wbuf->scp_daddr; > > + ipi_addr->iova = (u32)wbuf->isp_daddr; > > +} > > + > > +static inline void > > +mtk_dip_wbuf_to_ipi_tuning_addr(struct tuning_addr *ipi_addr, > > + struct mtk_dip_hw_working_buf *wbuf) > > +{ > > + ipi_addr->pa = (u32)wbuf->scp_daddr; > > + ipi_addr->iova = (u32)wbuf->isp_daddr; > > +} > > + > > +int mtk_dip_hw_working_buf_pool_init(struct mtk_dip_hw *dip_hw); > > +void mtk_dip_hw_working_buf_pool_release(struct mtk_dip_hw *dip_hw); > > + > > +#endif /* _MTK_DIP_HW_H_ */ > > + > > diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c > > new file mode 100644 > > index 000000000000..603be116b03f > > --- /dev/null > > +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c > > @@ -0,0 +1,794 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (c) 2018 MediaTek Inc. > > + * > > + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > + * Holmes Chiou <holmes.chiou-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > + * > > + */ > > + > > +#include <linux/device.h> > > +#include <linux/dma-iommu.h> > > +#include <linux/freezer.h> > > +#include <linux/platform_data/mtk_scp.h> > > +#include <linux/pm_runtime.h> > > +#include <linux/remoteproc.h> > > +#include <linux/slab.h> > > +#include <linux/spinlock.h> > > +#include <linux/wait.h> > > +#include "mtk-mdp3-cmdq.h" > > +#include "mtk_dip-dev.h" > > +#include "mtk_dip-hw.h" > > + > > +int mtk_dip_hw_working_buf_pool_init(struct mtk_dip_hw *dip_hw) > > +{ > > + int i; > > + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); > > + const int working_buf_size = round_up(DIP_FRM_SZ, PAGE_SIZE); > > + phys_addr_t working_buf_paddr; > > + > > + INIT_LIST_HEAD(&dip_hw->dip_freebufferlist.list); > > + spin_lock_init(&dip_hw->dip_freebufferlist.lock); > > + dip_hw->dip_freebufferlist.cnt = 0; > > + > > + INIT_LIST_HEAD(&dip_hw->dip_usedbufferlist.list); > > + spin_lock_init(&dip_hw->dip_usedbufferlist.lock); > > + dip_hw->dip_usedbufferlist.cnt = 0; > > + > > + init_waitqueue_head(&dip_hw->working_buf_wq); > > + > > + dip_hw->working_buf_mem_size = DIP_SUB_FRM_DATA_NUM * working_buf_size + > > + DIP_SCP_WORKINGBUF_OFFSET; > > + dip_hw->working_buf_mem_vaddr = > > + dma_alloc_coherent(&dip_hw->scp_pdev->dev, > > + dip_hw->working_buf_mem_size, > > + &dip_hw->working_buf_mem_scp_daddr, > > + GFP_KERNEL); > > + if (!dip_hw->working_buf_mem_vaddr) { > > + dev_err(&dip_dev->pdev->dev, > > + "memory alloc size %ld failed\n", > > + dip_hw->working_buf_mem_size); > > + return -ENOMEM; > > + } > > + > > + /* > > + * We got the incorrect physical address mapped when > > + * using dma_map_single() so I used dma_map_page_attrs() > > + * directly to workaround here. > > + * > > + * When I use dma_map_single() to map the address, the > > + * physical address retrieved back with iommu_get_domain_for_dev() > > + * and iommu_iova_to_phys() was not equal to the > > + * SCP dma address (it should be the same as the physical address > > + * since we don't have iommu), and was shifted by 0x4000000. > > + */ > > + working_buf_paddr = dip_hw->working_buf_mem_scp_daddr; > > + dip_hw->working_buf_mem_isp_daddr = > > + dma_map_page_attrs(&dip_dev->pdev->dev, > > + phys_to_page(working_buf_paddr), > > + 0, dip_hw->working_buf_mem_size, > > + DMA_BIDIRECTIONAL, > > + DMA_ATTR_SKIP_CPU_SYNC); > > + if (dma_mapping_error(&dip_dev->pdev->dev, > > + dip_hw->working_buf_mem_isp_daddr)) { > > + dev_err(&dip_dev->pdev->dev, > > + "failed to map buffer: s_daddr(%pad)\n", > > + &dip_hw->working_buf_mem_scp_daddr); > > + dma_free_coherent(&dip_hw->scp_pdev->dev, > > + dip_hw->working_buf_mem_size, > > + dip_hw->working_buf_mem_vaddr, > > + dip_hw->working_buf_mem_scp_daddr); > > + > > + return -ENOMEM; > > + } > > + > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: working_buf_mem: vaddr(%p), scp_daddr(%pad)\n", > > + __func__, > > + dip_hw->working_buf_mem_vaddr, > > + &dip_hw->working_buf_mem_scp_daddr); > > + > > + for (i = 0; i < DIP_SUB_FRM_DATA_NUM; i++) { > > + struct mtk_dip_hw_subframe *buf = &dip_hw->working_buf[i]; > > + > > + /* > > + * Total: 0 ~ 72 KB > > + * SubFrame: 0 ~ 16 KB > > + */ > > + buf->buffer.scp_daddr = dip_hw->working_buf_mem_scp_daddr + > > + DIP_SCP_WORKINGBUF_OFFSET + i * working_buf_size; > > + buf->buffer.vaddr = dip_hw->working_buf_mem_vaddr + > > + DIP_SCP_WORKINGBUF_OFFSET + i * working_buf_size; > > + buf->buffer.isp_daddr = dip_hw->working_buf_mem_isp_daddr + > > + DIP_SCP_WORKINGBUF_OFFSET + i * working_buf_size; > > Could you move out the offset to a local variable so that we don't duplicate > the same calculation 3 times? Yes, I will do that. > > > + buf->size = working_buf_size; > > + > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: buf(%d), scp_daddr(%pad), isp_daddr(%pad)\n", > > + __func__, i, &buf->buffer.scp_daddr, > > + &buf->buffer.isp_daddr); > > + > > + /* Tuning: 16 ~ 48 KB */ > > + buf->tuning_buf.scp_daddr = > > + buf->buffer.scp_daddr + DIP_TUNING_OFFSET; > > + buf->tuning_buf.vaddr = > > + buf->buffer.vaddr + DIP_TUNING_OFFSET; > > + buf->tuning_buf.isp_daddr = > > + buf->buffer.isp_daddr + DIP_TUNING_OFFSET; > > + > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: tuning_buf(%d), scp_daddr(%pad), isp_daddr(%pad)\n", > > + __func__, i, &buf->tuning_buf.scp_daddr, > > + &buf->tuning_buf.isp_daddr); > > + > > + /* Config_data: 48 ~ 72 KB */ > > + buf->config_data.scp_daddr = > > + buf->buffer.scp_daddr + DIP_COMP_OFFSET; > > + buf->config_data.vaddr = buf->buffer.vaddr + DIP_COMP_OFFSET; > > + > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: config_data(%d), scp_daddr(%pad), vaddr(%p)\n", > > + __func__, i, &buf->config_data.scp_daddr, > > + buf->config_data.vaddr); > > + > > + /* Frame parameters: 72 ~ 76 KB */ > > + buf->frameparam.scp_daddr = > > + buf->buffer.scp_daddr + DIP_FRAMEPARAM_OFFSET; > > + buf->frameparam.vaddr = > > + buf->buffer.vaddr + DIP_FRAMEPARAM_OFFSET; > > + > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: frameparam(%d), scp_daddr(%pad), vaddr(%p)\n", > > + __func__, i, &buf->frameparam.scp_daddr, > > + buf->frameparam.vaddr); > > + > > + list_add_tail(&buf->list_entry, > > + &dip_hw->dip_freebufferlist.list); > > + dip_hw->dip_freebufferlist.cnt++; > > + } > > + > > + return 0; > > +} > > + > > +void mtk_dip_hw_working_buf_pool_release(struct mtk_dip_hw *dip_hw) > > +{ > > + /* All the buffer should be in the freebufferlist when release */ > > + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); > > + u32 i; > > + > > + if (dip_hw->dip_usedbufferlist.cnt) > > + dev_warn(&dip_dev->pdev->dev, > > + "%s: dip_usedbufferlist is not empty (%d/%d)\n", > > + __func__, dip_hw->dip_usedbufferlist.cnt, i); > > + > > + dma_unmap_page_attrs(&dip_dev->pdev->dev, > > + dip_hw->working_buf_mem_isp_daddr, > > + dip_hw->working_buf_mem_size, DMA_BIDIRECTIONAL, > > + DMA_ATTR_SKIP_CPU_SYNC); > > + > > + dma_free_coherent(&dip_hw->scp_pdev->dev, dip_hw->working_buf_mem_size, > > + dip_hw->working_buf_mem_vaddr, > > + dip_hw->working_buf_mem_scp_daddr); > > +} > > + > > +static void mtk_dip_hw_working_buf_free(struct mtk_dip_hw *dip_hw, > > + struct mtk_dip_hw_subframe *working_buf) > > +{ > > + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); > > + > > + if (!working_buf) > > + return; > > + > > + spin_lock(&dip_hw->dip_usedbufferlist.lock); > > + list_del(&working_buf->list_entry); > > + dip_hw->dip_usedbufferlist.cnt--; > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: Free used buffer(%pad)\n", > > + __func__, &working_buf->buffer.scp_daddr); > > + spin_unlock(&dip_hw->dip_usedbufferlist.lock); > > + > > + spin_lock(&dip_hw->dip_freebufferlist.lock); > > + list_add_tail(&working_buf->list_entry, > > + &dip_hw->dip_freebufferlist.list); > > + dip_hw->dip_freebufferlist.cnt++; > > + spin_unlock(&dip_hw->dip_freebufferlist.lock); > > +} > > + > > +static struct mtk_dip_hw_subframe* > > +mtk_dip_hw_working_buf_alloc(struct mtk_dip_hw *dip_hw) > > +{ > > + struct mtk_dip_hw_subframe *working_buf; > > + > > + spin_lock(&dip_hw->dip_freebufferlist.lock); > > + if (list_empty(&dip_hw->dip_freebufferlist.list)) { > > + spin_unlock(&dip_hw->dip_freebufferlist.lock); > > + return NULL; > > + } > > + > > + working_buf = list_first_entry(&dip_hw->dip_freebufferlist.list, > > + struct mtk_dip_hw_subframe, list_entry); > > + list_del(&working_buf->list_entry); > > + dip_hw->dip_freebufferlist.cnt--; > > + spin_unlock(&dip_hw->dip_freebufferlist.lock); > > + > > + spin_lock(&dip_hw->dip_usedbufferlist.lock); > > + list_add_tail(&working_buf->list_entry, > > + &dip_hw->dip_usedbufferlist.list); > > + dip_hw->dip_usedbufferlist.cnt++; > > + spin_unlock(&dip_hw->dip_usedbufferlist.lock); > > Do we really need this usedbufferlist? We only need dip_freebufferlist and I will remove usedbufferlist. > > > + > > + return working_buf; > > +} > > + > > +static void mtk_dip_notify(struct mtk_dip_request *req) > > +{ > > + struct mtk_dip_hw *dip_hw = &req->dip_pipe->dip_dev->dip_hw; > > + struct mtk_dip_dev *dip_dev = req->dip_pipe->dip_dev; > > + struct mtk_dip_pipe *pipe = req->dip_pipe; > > + struct img_ipi_frameparam *iparam = &req->img_fparam.frameparam; > > + enum vb2_buffer_state vbf_state; > > + int ret; > > + > > + if (iparam->state != FRAME_STATE_HW_TIMEOUT) > > + vbf_state = VB2_BUF_STATE_DONE; > > + else > > + vbf_state = VB2_BUF_STATE_ERROR; > > + > > + ret = mtk_dip_pipe_job_finish(pipe, iparam->index, vbf_state); > > + if (ret) > > + dev_dbg(&dip_dev->pdev->dev, "%s: finish CB failed(%d)\n", > > + __func__, ret); > > I can see that function only returns 0. I will change mtk_dip_pipe_job_finish as a void function. I will also remove the check. > > > + > > + pm_runtime_put_autosuspend(&pipe->dip_dev->pdev->dev); I will call pm_runtime_mask_last_busy() here. > > It's necessary to call pm_runtime_mask_last_busy() before this for > autosuspend to work in any useful way. > > > + > > + mtk_dip_hw_working_buf_free(dip_hw, req->working_buf); > > + req->working_buf = NULL; > > + wake_up(&dip_hw->working_buf_wq); > > + wake_up(&dip_hw->flushing_wq); > > + > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s:%s: job id(%d), frame_no(%d) finished\n", > > + __func__, pipe->desc->name, iparam->index, iparam->frame_no); > > +} > > + > > +static void mdp_cb_timeout_worker(struct work_struct *work) > > +{ > > + struct mtk_dip_request *req = mtk_dip_hw_mdpcb_work_to_req(work); > > + struct img_ipi_param ipi_param; > > + > > + dev_dbg(&req->dip_pipe->dip_dev->pdev->dev, > > + "%s: send frame no(%d) HW timeout dbg IPI\n", > > + __func__, req->img_fparam.frameparam.frame_no); > > + > > + ipi_param.usage = IMG_IPI_DEBUG; > > + scp_ipi_send(req->dip_pipe->dip_dev->dip_hw.scp_pdev, SCP_IPI_DIP, > > + (void *)&ipi_param, sizeof(ipi_param), 0); > > + mtk_dip_notify(req); > > +} > > + > > +/* Maybe in IRQ context of cmdq */ > > +static void dip_mdp_cb_func(struct cmdq_cb_data data) > > +{ > > + struct mtk_dip_request *req; > > + struct mtk_dip_dev *dip_dev; > > + > > + if (!data.data) { > > + pr_err("%s: data->data is NULL\n", > > + __func__); > > + return; > > + } > > I'd just make this: > > if (WARN_ON(!data.data)) > return; I got it. I will do that. > > > + > > + req = data.data; > > We could just assign this in the declaration and also make the check above > test for !req instead. I got it. > > > + dip_dev = req->dip_pipe->dip_dev; > > + > > + dev_dbg(&dip_dev->pdev->dev, "%s: req(%p), idx(%d), no(%d), s(%d), n_in(%d), n_out(%d)\n", > > + __func__, > > + req, > > + req->img_fparam.frameparam.index, > > + req->img_fparam.frameparam.frame_no, > > + req->img_fparam.frameparam.state, > > + req->img_fparam.frameparam.num_inputs, > > + req->img_fparam.frameparam.num_outputs); > > + > > + if (data.sta != CMDQ_CB_NORMAL) { > > + dev_err(&dip_dev->pdev->dev, "%s: frame no(%d) HW timeout\n", > > + __func__, req->img_fparam.frameparam.frame_no); > > + req->img_fparam.frameparam.state = FRAME_STATE_HW_TIMEOUT; > > + INIT_WORK(&req->mdpcb_work, mdp_cb_timeout_worker); > > + queue_work(req->dip_pipe->dip_dev->dip_hw.mdpcb_workqueue, > > + &req->mdpcb_work); > > + } else { > > + mtk_dip_notify(req); > > + } > > +} > > + > > +static void dip_runner_func(struct work_struct *work) > > +{ > > + struct mtk_dip_request *req = mtk_dip_hw_mdp_work_to_req(work); > > + struct mtk_dip_dev *dip_dev = req->dip_pipe->dip_dev; > > + struct img_config *config_data = > > + (struct img_config *)req->img_fparam.frameparam.config_data.va; > > Could we get a proper pointer from the driver (not IPI) structures? I think > that should be req->working_buf->config_data? Yes, I will do that. > > > + u32 num; > > + > > + /* > > + * Call MDP/GCE API to do HW excecution > > + * Pass the framejob to MDP driver > > + */ > > + req->img_fparam.frameparam.state = FRAME_STATE_COMPOSING; > > Should this be really composing? I thought we just finished composing at > this point. The field frameparam.state is not used anymore. I would like to remove it. > > > + num = atomic_inc_return(&dip_dev->dip_hw.num_running); > > I don't see where this counter is decremented. Could we just remove it? Yes, I will remove it. > > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s,MDP running num(%d)\n", __func__, num); > > + mdp_cmdq_sendtask(dip_dev->dip_hw.mdp_pdev, > > + config_data, > > + &req->img_fparam.frameparam, > > + NULL, > > + false, > > + dip_mdp_cb_func, > > + req); > > It's not a regular convention in the kernel coding style to wrap the lines > for each single argument. I got it. I will change it as following: mdp_cmdq_sendtask(dip_dev->dip_hw.mdp_pdev, config_data, &req->img_fparam.frameparam, NULL, false, dip_mdp_cb_func, req); > > > +} > > + > > +static void dip_scp_handler(void *data, unsigned int len, void *priv) > > +{ > > + struct mtk_dip_pipe_job_info *pipe_job_info; > > + struct mtk_dip_pipe *pipe; > > + int pipe_id; > > + struct mtk_dip_request *req; > > + struct img_ipi_frameparam *frameparam; > > + struct mtk_dip_dev *dip_dev = (struct mtk_dip_dev *)priv; > > + struct mtk_dip_hw *dip_hw = &dip_dev->dip_hw; > > + struct img_ipi_param *ipi_param; > > + u32 num; > > + int ret; > > + > > + if (WARN_ONCE(!data, "%s: failed due to NULL data\n", __func__)) > > + return; > > + > > + ipi_param = (struct img_ipi_param *)data; > > + > > + if (ipi_param->usage != IMG_IPI_FRAME) { > > Should we check len before dereferencing the pointer? Yes, I will add the len check. > > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: recevied SCP_IPI_DIP ACK, ipi_param.usage(%d)\n", > > + __func__, ipi_param->usage); > > Is this an expected situation? If not, perhaps we should at least print a > warning here? If it is the ack of IMG_IPI_INIT message, it is an expected situation. I would like to change the check as following: if (len != sizeof(*ipi_param)) { dev_warn(&dip_dev->pdev->dev, "%s: recevied unknown data, len(%d)\n", __func__, len); return; } ipi_param = (struct img_ipi_param *)data; if (ipi_param->usage == IMG_IPI_INIT) return if (ipi_param->usage != IMG_IPI_FRAME) { dev_warn(&dip_dev->pdev->dev, "%s: recevied unknown ipi_param, usage(%d)\n", __func__, ipi_param->usage); return; } > > > + return; > > + } > > + > > + frameparam = (struct img_ipi_frameparam *)ipi_param->frm_param.va; > > Are we getting a kernel virtual address from the firmware here? That's a > recipe for a disaster. What if there is a bug (or a security hole) there and > the address ends up accidentally (or deliberately) pointing to some critical > kernel data? > > We should get some kind of job identifier from the firmware and then try to > find a matching request in our request list. Then any buffer addresses > should be retrieved from the request struct itself. I got it. I will use the job identifier of DIP request instead of the CPU address in ipi message. > > > + pipe_id = mtk_dip_pipe_get_pipe_from_job_id(frameparam->index); > > + pipe = mtk_dip_dev_get_pipe(dip_dev, pipe_id); > > + > > nit: The next line is directly related to previous, so no need for the blank > line. I got it. > > > + if (!pipe) { > > + dev_warn(&dip_dev->pdev->dev, > > + "%s: get invalid img_ipi_frameparam index(%d) from firmware\n", > > + __func__, frameparam->frame_no); > > + return; > > + } > > + > > + pipe_job_info = mtk_dip_pipe_get_running_job_info(pipe, > > + frameparam->index); > > + > > + if (WARN_ONCE(!pipe_job_info, "%s: frame_no(%d) is lost\n", > > + __func__, frameparam->frame_no)) > > + return; > > + > > + req = mtk_dip_pipe_job_info_to_req(pipe_job_info); > > + memcpy(&req->img_fparam.frameparam, frameparam, > > + sizeof(req->img_fparam.frameparam)); > > + num = atomic_dec_return(&dip_hw->num_composing); > > + down(&dip_hw->sem); > > I think this should be up()? I will correct it. > > > + > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: frame_no(%d) is back, composing num(%d)\n", > > + __func__, frameparam->frame_no, num); > > + > > + wake_up(&dip_dev->dip_hw.flushing_hw_wq); > > + > > + INIT_WORK(&req->mdp_work, dip_runner_func); > > + ret = queue_work(dip_hw->mdp_wq, &req->mdp_work); > > + if (!ret) { > > + dev_dbg(&dip_dev->pdev->dev, > > + "frame_no(%d) queue_work failed to mdp_wq: %d\n", > > + frameparam->frame_no, ret); > > + } > > It shouldn't be possible for this to fail given that it's a new request and > the work was just initialized above. I will remove the unnecessary check here. > > > +} > > + > > +static bool > > +mtk_dip_hw_is_working_buf_allocated(struct mtk_dip_request *req) > > +{ > > + req->working_buf = > > + mtk_dip_hw_working_buf_alloc(&req->dip_pipe->dip_dev->dip_hw); > > + > > + if (!req->working_buf) { > > + dev_dbg(&req->dip_pipe->dip_dev->pdev->dev, > > + "%s:%s:req(%p): no free working buffer available\n", > > + __func__, req->dip_pipe->desc->name, req); > > + return false; > > + } > > + > > + return true; > > +} > > + > > +static void dip_submit_worker(struct work_struct *work) > > Shouldn't this be called dip_composer_workfunc()? Yes, I will rename it as dip_composer_workfunc(). > > > +{ > > + struct mtk_dip_request *req = mtk_dip_hw_fw_work_to_req(work); > > + struct mtk_dip_hw *dip_hw = &req->dip_pipe->dip_dev->dip_hw; > > + struct mtk_dip_dev *dip_dev = req->dip_pipe->dip_dev; > > + struct img_ipi_param ipi_param; > > + struct mtk_dip_hw_subframe *buf; > > + int ret; > > + > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: to send frame_no(%d),num(%d)\n", > > + __func__, req->img_fparam.frameparam.frame_no, > > + atomic_read(&dip_hw->num_composing)); > > + > > + wait_event_freezable(dip_hw->working_buf_wq, > > + mtk_dip_hw_is_working_buf_allocated(req)); > > + up(&dip_hw->sem); > > Shouldn't this be down_freezable()? The idea to use semaphores was to avoid > such custom wait_event() calls like above. > > Basically the semaphore should be initialized with the total number of > composer buffers and once down() is called that number of times, any further > down() would block until some up() is called. I got it. I will use down_freezable() instead of the custom wait_event() calls. > > > + > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: wakeup frame_no(%d),num(%d)\n", > > + __func__, req->img_fparam.frameparam.frame_no, > > + atomic_read(&dip_hw->num_composing)); > > + > > + buf = req->working_buf; > > + mtk_dip_wbuf_to_ipi_img_addr(&req->img_fparam.frameparam.subfrm_data, > > + &buf->buffer); > > + memset(buf->buffer.vaddr, 0, DIP_SUB_FRM_SZ); > > + mtk_dip_wbuf_to_ipi_img_sw_addr(&req->img_fparam.frameparam.config_data, > > + &buf->config_data); > > + memset(buf->config_data.vaddr, 0, DIP_COMP_SZ); > > + > > + if (!req->img_fparam.frameparam.tuning_data.present) { > > + /* > > + * When user enqueued without tuning buffer, > > + * it would use driver internal buffer. > > + */ > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: frame_no(%d) has no tuning_data\n", > > + __func__, req->img_fparam.frameparam.frame_no); > > + > > + mtk_dip_wbuf_to_ipi_tuning_addr > > + (&req->img_fparam.frameparam.tuning_data, > > + &buf->tuning_buf); > > + memset(buf->tuning_buf.vaddr, 0, DIP_TUNING_SZ); > > + } > > + > > + req->img_fparam.frameparam.state = FRAME_STATE_COMPOSING; > > + mtk_dip_wbuf_to_ipi_img_sw_addr(&req->img_fparam.frameparam.self_data, > > + &buf->frameparam); > > + memcpy(buf->frameparam.vaddr, &req->img_fparam.frameparam, > > + sizeof(req->img_fparam.frameparam)); > > Is img_fparam really used at this stage? I can only see ipi_param passed to > the IPI. The content of img_fparam is passed to SCP. The dip frame information is saved in req->img_fparam.frameparam (in mtk_dip_pipe_ipi_params_config()). The content of req->img_fparam.frameparam is copied to buf->frameparam.vaddr. Since we set ipi_param.frm_param.pa to the buf->frameparam.scp_daddr in mtk_dip_wbuf_to_ipi_img_sw_addr(), the content of img_fparam is pass to SCP through ipi_param. > > > + > > + ipi_param.usage = IMG_IPI_FRAME; > > + mtk_dip_wbuf_to_ipi_img_sw_addr(&ipi_param.frm_param, > > + &buf->frameparam); > > + > > + mutex_lock(&dip_hw->hw_op_lock); > > + atomic_inc(&dip_hw->num_composing); > > Do we still need this num_composing counter once we have the semaphore? No. I will remove it. > > > + ret = scp_ipi_send(dip_hw->scp_pdev, SCP_IPI_DIP, &ipi_param, > > + sizeof(ipi_param), 0); > > + if (ret) > > + dev_dbg(&dip_dev->pdev->dev, "%s: send SCP_IPI_DIP_FRAME failed %d\n", > > + __func__, ret); > > This is an error, isn't it? We need to have proper error handling here, > which at this stage would mean completing the request with buffers returned > with ERROR state. Yes, it is an error to be handling. I will return the buffer with ERROR as following: if (ret) { dev_warn(&dip_dev->pdev->dev, "%s: send SCP_IPI_DIP_FRAME failed %d\n", __func__, ret); mtk_dip_pipe_job_finish(req->dip_pipe, iparam->index, VB2_BUF_STATE_ERROR); } > > > + mutex_unlock(&dip_hw->hw_op_lock); > > + > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: frame_no(%d),idx(0x%x), composing num(%d)\n", > > + __func__, req->img_fparam.frameparam.frame_no, > > + req->img_fparam.frameparam.index, > > + atomic_read(&dip_hw->num_composing)); > > +} > > + > > +static int mtk_dip_hw_res_init(struct mtk_dip_hw *dip_hw) > > +{ > > + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); > > + int ret; > > + > > + dip_hw->mdp_pdev = mdp_get_plat_device(dip_dev->pdev); > > + if (!dip_hw->mdp_pdev) { > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: failed to get MDP device\n", > > + __func__); > > + return -EINVAL; > > + } > > + > > + dip_hw->mdpcb_workqueue = > > + alloc_ordered_workqueue("%s", > > + __WQ_LEGACY | WQ_MEM_RECLAIM | > > + WQ_FREEZABLE, > > + "mdp_callback"); > > + if (!dip_hw->mdpcb_workqueue) { > > + dev_err(&dip_dev->pdev->dev, > > + "%s: unable to alloc mdpcb workqueue\n", __func__); > > + ret = -ENOMEM; > > + goto destroy_mdpcb_wq; > > + } > > + > > + dip_hw->composer_wq = > > + alloc_ordered_workqueue("%s", > > + __WQ_LEGACY | WQ_MEM_RECLAIM | > > + WQ_FREEZABLE, > > + "dip_composer"); > > + if (!dip_hw->composer_wq) { > > + dev_err(&dip_dev->pdev->dev, > > + "%s: unable to alloc composer workqueue\n", __func__); > > + ret = -ENOMEM; > > + goto destroy_dip_composer_wq; > > + } > > + > > + dip_hw->mdp_wq = > > + alloc_ordered_workqueue("%s", > > + __WQ_LEGACY | WQ_MEM_RECLAIM | > > + WQ_FREEZABLE, > > + "dip_runner"); > > + if (!dip_hw->mdp_wq) { > > + dev_err(&dip_dev->pdev->dev, > > + "%s: unable to alloc dip_runner\n", __func__); > > + ret = -ENOMEM; > > + goto destroy_dip_runner_wq; > > + } > > + > > + init_waitqueue_head(&dip_hw->flushing_wq); > > + init_waitqueue_head(&dip_hw->flushing_hw_wq); > > nit: To avoid confusing workqueues with waitqueues, I'd suggest using _waitq > suffix, which seems to be quite common in the kernel code. (And _workq or > _workqueue for workqueues are not common at all.) I got it. I will rename the flushing_wq and flushing_hw_wq as flushing_waitq and flushing_hw_waitq. > > > + > > + return 0; > > + > > +destroy_dip_runner_wq: > > + destroy_workqueue(dip_hw->mdp_wq); > > + > > +destroy_dip_composer_wq: > > + destroy_workqueue(dip_hw->composer_wq); > > + > > +destroy_mdpcb_wq: > > + destroy_workqueue(dip_hw->mdpcb_workqueue); > > Let's use consistent naming, i.e. mdpcb_wq. I will use mdpcb_wq instead. > > > + > > + return ret; > > +} > > + > > +static int mtk_dip_hw_res_release(struct mtk_dip_dev *dip_dev) > > +{ > > + flush_workqueue(dip_dev->dip_hw.mdp_wq); > > + destroy_workqueue(dip_dev->dip_hw.mdp_wq); > > + dip_dev->dip_hw.mdp_wq = NULL; > > + > > + flush_workqueue(dip_dev->dip_hw.mdpcb_workqueue); > > + destroy_workqueue(dip_dev->dip_hw.mdpcb_workqueue); > > + dip_dev->dip_hw.mdpcb_workqueue = NULL; > > + > > + flush_workqueue(dip_dev->dip_hw.composer_wq); > > + destroy_workqueue(dip_dev->dip_hw.composer_wq); > > + dip_dev->dip_hw.composer_wq = NULL; > > + > > + atomic_set(&dip_dev->dip_hw.num_composing, 0); > > + atomic_set(&dip_dev->dip_hw.num_running, 0); > > + atomic_set(&dip_dev->dip_hw.dip_enque_cnt, 0); > > + > > + return 0; > > +} > > + > > +static bool mtk_dip_pipe_running_job_list_empty(struct mtk_dip_pipe *pipe, > > + int *num) > > +{ > > + spin_lock(&pipe->job_lock); > > + *num = pipe->num_jobs; > > We can just check list_empty(&pipe->pipe_job_running_list) here and remove > pipe->num_jobs completely. I will remove pipe->num_jobs completely. > > > + spin_unlock(&pipe->job_lock); > > + > > + return !(*num); > > +} > > + > > +static int mtk_dip_hw_flush_pipe_jobs(struct mtk_dip_pipe *pipe) > > +{ > > + int num; > > + int ret = wait_event_freezable_timeout > > nit: Could we avoid mixing non-trivial code with declarations? I got it. > > > + (pipe->dip_dev->dip_hw.flushing_wq, > > + mtk_dip_pipe_running_job_list_empty(pipe, &num), > > + msecs_to_jiffies(DIP_FLUSHING_WQ_TIMEOUT)); > > We shouldn't wait here for all the jobs to complete, just those that are > already queued to hardware. The stop operation should be as instant as > possible. > > This should basically be done like this: > - remove any pending jobs not queued to the hardware yet, > - wait for the hardware to finish anything that can't be cancelled - > possibly the same wait as done in mtk_dip_suspend(). The pending job removal codes are in mtk_dip_hw_streamoff(), I will move them here (mtk_dip_hw_flush_pipe_jobs). > > > + > > + if (!ret && num) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s: flushing is aborted, num(%d)\n", > > + __func__, num); > > + return -EINVAL; > > + } > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s: wakeup num(%d)\n", __func__, num); > > + return 0; > > +} > > + > > +static int mtk_dip_hw_connect(struct mtk_dip_dev *dip_dev) > > +{ > > + int ret; > > + struct img_ipi_param ipi_param; > > + > > + pm_runtime_get_sync(&dip_dev->pdev->dev); > > + > > + scp_ipi_register(dip_dev->dip_hw.scp_pdev, SCP_IPI_DIP, dip_scp_handler, > > + dip_dev); > > + memset(&ipi_param, 0, sizeof(ipi_param)); > > + ipi_param.usage = IMG_IPI_INIT; > > + ret = scp_ipi_send(dip_dev->dip_hw.scp_pdev, SCP_IPI_DIP, &ipi_param, > > + sizeof(ipi_param), 200); > > + if (ret) { > > + dev_dbg(&dip_dev->pdev->dev, "%s: send SCP_IPI_DIP_FRAME failed %d\n", > > + __func__, ret); > > + return -EBUSY; > > + } > > + > > + pm_runtime_put_autosuspend(&dip_dev->pdev->dev); > > + > > + ret = mtk_dip_hw_res_init(&dip_dev->dip_hw); > > There isn't anything in that function that couldn't be just done once in > probe. Could we just move it there? Yes, I will move it to probe. > > > + if (ret) { > > + dev_err(&dip_dev->pdev->dev, > > + "%s: mtk_dip_hw_res_init failed(%d)\n", __func__, ret); > > + > > + return -EBUSY; > > + } > > + > > + return 0; > > +} > > + > > +static void mtk_dip_hw_disconnect(struct mtk_dip_dev *dip_dev) > > +{ > > + int ret; > > + > > No need to send IMG_IPI_DEINIT? > Yes, I will send IMG_IPI_DEINIT here. > > + ret = mtk_dip_hw_res_release(dip_dev); > > + if (ret) > > + dev_err(&dip_dev->pdev->dev, > > + "%s: mtk_dip_hw_res_release failed ret(%d)\n", > > + __func__, ret); > > No need to call scp_ipi_unregister()? > Yes, I will call scp_ipi_unregister() here. > > +} > > + > > +int mtk_dip_hw_streamon(struct mtk_dip_pipe *pipe) > > +{ > > + struct mtk_dip_dev *dip_dev = pipe->dip_dev; > > + int count, ret; > > + > > + mutex_lock(&dip_dev->dip_hw.hw_op_lock); > > + count = atomic_read(&dip_dev->dip_hw.dip_stream_cnt); > > No need to use atomics if this is already protected with a mutex. > I will use int instead. > > + if (!count) { > > + ret = mtk_dip_hw_connect(pipe->dip_dev); > > + if (ret) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s:%s: pipe(%d) connect to dip_hw failed\n", > > + __func__, pipe->desc->name, pipe->desc->id); > > + > > + mutex_unlock(&dip_dev->dip_hw.hw_op_lock); > > + > > + return ret; > > + } > > + > > + count = atomic_inc_return(&dip_dev->dip_hw.dip_stream_cnt); > > + } > > + mutex_unlock(&dip_dev->dip_hw.hw_op_lock); > > + > > + mutex_lock(&pipe->lock); > > + pipe->streaming = 1; > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s: started stream, id(%d), stream cnt(%d)\n", > > + __func__, pipe->desc->name, pipe->desc->id, count); > > + mtk_dip_pipe_try_enqueue(pipe); > > + mutex_unlock(&pipe->lock); > > + > > + return 0; > > +} > > + > > +int mtk_dip_hw_streamoff(struct mtk_dip_pipe *pipe) > > +{ > > + struct mtk_dip_dev *dip_dev = pipe->dip_dev; > > + struct mtk_dip_pipe_job_info *job_info; > > + struct mtk_dip_pipe_job_info *tmp_job_info; > > + s32 count; > > + int ret; > > + > > + mutex_lock(&pipe->lock); > > Given that we end up calling this from mtk_dip_vb2_stop_streaming(), after > the locking changes I suggested, this function will be called with this lock > acquired already. I will remove the lock acquiring codes here. > > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s:%s: streamoff, removing all running jobs\n", > > + __func__, pipe->desc->name); > > + > > + spin_lock(&pipe->job_lock); > > The loop below is quite heavy weight as for something that runs under a > spinlock (that by definition should only protect short critical sections). > Could we just splice the list into a local list_head under the spinlock and > then just iterate over the local list after releasing the spinlock? I will splice the list into a local list_head here. > > > + list_for_each_entry_safe(job_info, tmp_job_info, > > + &pipe->pipe_job_running_list, list) { > > Don't we need to stop the hardware first? Yes, I will call the mtk_dip_hw_flush_pipe_jobs() and stop hardware with IMG_IPI_DEINIT first. > > > + struct mtk_dip_request *req = > > + mtk_dip_pipe_job_info_to_req(job_info); > > + int i; > > + > > + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) { > > + struct mtk_dip_dev_buffer *dev_buf = > > + job_info->buf_map[i]; > > + struct mtk_dip_video_device *node; > > + > > + if (!dev_buf) > > + continue; > > + > > + node = mtk_dip_vbq_to_node > > + (dev_buf->vbb.vb2_buf.vb2_queue); > > + vb2_buffer_done(&dev_buf->vbb.vb2_buf, > > + VB2_BUF_STATE_ERROR); > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s:%s: return buf, idx(%d), state(%d)\n", > > + pipe->desc->name, node->desc->name, > > + dev_buf->vbb.vb2_buf.index, > > + VB2_BUF_STATE_ERROR); > > + } > > I can see that there is an existing mtk_dip_return_all_buffers() function > that would return all the buffers of given video node when it's being > stopped. How does this code interfere with that code? If all buffer are carried by media requests, I would like to keep the vb2_buffer_done here only. > > Actually, I'm not fully sure anymore what's the expected behavior here. I've > asked on #v4l and will let you know once we figure out. > > > + > > + pipe->num_jobs--; > > + list_del(&job_info->list); > > We don't need to delete and decrement here. Just set to 0 and init list head > after the loop. (The latter wouldn't be needed if we splice the list into a > local list head.) I got it. > > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s: not run job, id(%d), no(%d), state(%d), job cnt(%d)\n", > > + __func__, pipe->desc->name, job_info->id, > > + req->img_fparam.frameparam.frame_no, > > + VB2_BUF_STATE_ERROR, pipe->num_jobs); > > + } > > + spin_unlock(&pipe->job_lock); > > + > > + ret = mtk_dip_hw_flush_pipe_jobs(pipe); > > + if (WARN_ON(ret != 0)) { > > + dev_err(&dip_dev->pdev->dev, > > + "%s:%s: mtk_dip_hw_flush_pipe_jobs, ret(%d)\n", > > + __func__, pipe->desc->name, ret); > > + } > > I suppose this should be the very first thing to do in this function. I will do it first in this function. > > > + > > + pipe->streaming = 0; > > + mutex_unlock(&pipe->lock); > > + > > + mutex_lock(&dip_dev->dip_hw.hw_op_lock); > > + count = atomic_read(&dip_dev->dip_hw.dip_stream_cnt); > > + if (count > 0 && atomic_dec_and_test(&dip_dev->dip_hw.dip_stream_cnt)) { > > It shouldn't be possible for count to be <= 0 at this point. Are you seeing > cases like that when running the code? No. I will only keep atomic_dec_and_test(&dip_dev->dip_hw.dip_stream_cnt) here. > > > + mtk_dip_hw_disconnect(dip_dev); > > + > > + dev_dbg(&dip_dev->pdev->dev, "%s: dip_hw disconnected, stream cnt(%d)\n", > > + __func__, atomic_read(&dip_dev->dip_hw.dip_stream_cnt)); > > + } > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s: stopped stream id(%d), stream cnt(%d)\n", > > + __func__, pipe->desc->name, pipe->desc->id, count); > > + > > + mutex_unlock(&dip_dev->dip_hw.hw_op_lock); > > + > > + return 0; > > +} > > + > > +void mtk_dip_hw_enqueue(struct mtk_dip_hw *dip_hw, > > + struct mtk_dip_request *req) > > +{ > > + struct img_ipi_frameparam *frameparams = &req->img_fparam.frameparam; > > + struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw); > > + int ret; > > + struct mtk_dip_dev_buffer **map = req->job_info.buf_map; > > + > > + /* > > + * Workaround to pass v4l2 compliance test when it pass only one buffer > > + * to DIP. The check is already done in request_validate(). > > + */ > > + if (!map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT] || > > + (!map[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE] && > > + !map[MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE])){ > > + dev_dbg(&dip_dev->pdev->dev, > > + "won't trigger hw job: raw(%p), mdp0(%p), mdp1(%p)\n", > > + map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT], > > + map[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE], > > + map[MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE]); > > + > > + mtk_dip_pipe_job_finish(req->dip_pipe, req->job_info.id, > > + VB2_BUF_STATE_DONE); > > + return; > > + } > > Please remove the workarounds. There is no value in passing the test if > there is a workaround for it. If it keeps failing we at least know that we > need to fix something. I got it. > > > + > > + mtk_dip_pipe_ipi_params_config(req); > > + frameparams->state = FRAME_STATE_INIT; > > + frameparams->frame_no = atomic_inc_return(&dip_hw->dip_enque_cnt); > > typo: enqueue I will fix it. > > > + > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s: hw job id(%d), frame_no(%d) into worklist\n", > > + __func__, frameparams->index, frameparams->frame_no); > > + > > + INIT_WORK(&req->fw_work, dip_submit_worker); > > + pm_runtime_get_sync(&dip_dev->pdev->dev); > > Aren't we still just only composing the job? Should we wait with this call > until we actually queue the job to the ISP hardware? I will move the pm_runtime_get_sync() call to dip_runner_func() before we call mdp_cmdq_sendtask(). The ISP hareware is triggered actually through mdp_cmdq_sendtask(). > > > + ret = queue_work(dip_hw->composer_wq, &req->fw_work); > > + if (!ret) > > + dev_dbg(&dip_dev->pdev->dev, > > + "frame_no(%d) queue_work failed, already on a queue\n", > > + frameparams->frame_no, ret); > > How is this possible? (I recall seeing this somewhere already. Was it the P1 driver?) I will remove the chcek since the work is just init. > > > +} > > diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c > > new file mode 100644 > > index 000000000000..7b454952566f > > --- /dev/null > > +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c > > @@ -0,0 +1,1786 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (c) 2018 MediaTek Inc. > > + * > > + * Author: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > > + * > > + */ > > + > > +#include <linux/platform_device.h> > > +#include <linux/module.h> > > +#include <linux/of_device.h> > > +#include <linux/platform_data/mtk_scp.h> > > +#include <linux/pm_runtime.h> > > +#include <linux/remoteproc.h> > > +#include <linux/videodev2.h> > > +#include <media/videobuf2-dma-contig.h> > > +#include <media/v4l2-ioctl.h> > > +#include <media/v4l2-subdev.h> > > +#include <media/v4l2-event.h> > > +#include "mtk_dip-dev.h" > > +#include "mtk_dip-hw.h" > > +#include "mtk-mdp3-regs.h" > > + > > +static int mtk_dip_subdev_open(struct v4l2_subdev *sd, > > + struct v4l2_subdev_fh *fh) > > +{ > > + struct mtk_dip_pipe *pipe = mtk_dip_subdev_to_pipe(sd); > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, "%s:%s: pipe(%d) open\n", > > + __func__, pipe->desc->name, pipe->desc->id); > > + > > + pipe->fh = fh; > > What is this needed for? The fh is not used. I will remove it. > > > + > > + return 0; > > +} > > + > > +static int mtk_dip_subdev_close(struct v4l2_subdev *sd, > > + struct v4l2_subdev_fh *fh) > > +{ > > + struct mtk_dip_pipe *pipe = mtk_dip_subdev_to_pipe(sd); > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, "%s:%s: pipe(%d) close\n", > > + __func__, pipe->desc->name, pipe->desc->id); > > + > > + return 0; > > +} > > Do we need to implement this? No. I will remove mtk_dip_subdev_close(). > > > + > > +static int mtk_dip_subdev_s_stream(struct v4l2_subdev *sd, > > + int enable) > > +{ > > + struct mtk_dip_pipe *pipe = mtk_dip_subdev_to_pipe(sd); > > + int ret; > > + > > + if (enable) { > > + ret = mtk_dip_hw_streamon(pipe); > > + if (ret) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s:%s: pipe(%d) streamon failed\n", > > + __func__, pipe->desc->name, pipe->desc->id); > > + } > > CodingStyle: No brackets needed for only 1 statement. I got it. > > > + > > + return ret; > > + } > > nit: Since the 2 cases are symmetrical (as opposed to success and failure), > I would put them in if/else. I will use if/else here. > > > + > > + ret = mtk_dip_hw_streamoff(pipe); > > + if (ret) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s:%s: pipe(%d) streamon off with errors\n", > > + __func__, pipe->desc->name, pipe->desc->id); > > + } > > CodingStyle: No brackets needed for only 1 statement. I got it. > > > + > > + return ret; > > +} > > + > > +static int mtk_dip_link_setup(struct media_entity *entity, > > + const struct media_pad *local, > > + const struct media_pad *remote, > > + u32 flags) > > +{ > > + struct mtk_dip_pipe *pipe = > > + container_of(entity, struct mtk_dip_pipe, subdev.entity); > > + u32 pad = local->index; > > + int count; > > + > > + WARN_ON(entity->obj_type != MEDIA_ENTITY_TYPE_V4L2_SUBDEV); > > + WARN_ON(pad >= pipe->num_nodes); > > + > > + mutex_lock(&pipe->lock); > > + if (!vb2_start_streaming_called(&pipe->nodes[pad].dev_q.vbq)) { > > + int enable = flags & MEDIA_LNK_FL_ENABLED; > > + int node_enabled = > > + pipe->nodes[pad].flags & MEDIA_LNK_FL_ENABLED; > > + > > + if (enable && !node_enabled) > > + atomic_inc_return(&pipe->cnt_nodes_not_streaming); > > + > > + if (!enable && node_enabled) > > + atomic_dec_return(&pipe->cnt_nodes_not_streaming); > > Given that we need to acquire the big pipe mutex anyway, there is probably > no need to be too smart here anyway. > > I suggested this method with counter > with hope that we could simplify the locking, but apparently that didn't > have such effect. > > Let's just make this simple: > 1) serialize full link_setup, start_streaming and stop_streaming with pipe->lock, > 2) keep two bitmasks, pipe->nodes_streaming and pipe->nodes_enabled, > 3) use media_pipeline_start/stop() to lock the enabled state, as suggested > in my comment for mtk_dip_vb2_start_streaming(), so that we don't need to > think about streaming state here in this function. I would like to redesign the flow following your suggestion above. > > > + } > > + pipe->nodes[pad].flags &= ~(MEDIA_LNK_FL_ENABLED); > > No need for the parentheses. I got it. > > > + pipe->nodes[pad].flags |= MEDIA_LNK_FL_ENABLED & flags; > > The typical convention is to have the constants on the right. I will correct it. > > > + count = atomic_read(&pipe->cnt_nodes_not_streaming); > > + mutex_unlock(&pipe->lock); > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s: link setup, flags(0x%x), (%s)%d -->(%s)%d, cnt_nodes_ns(%d)\n", > > + pipe->desc->name, flags, local->entity->name, local->index, > > + remote->entity->name, remote->index, count); > > + > > + return 0; > > +} > > + > > +static int mtk_dip_vb2_buf_prepare(struct vb2_buffer *vb) > > +{ > > + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vb->vb2_queue); > > + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vb->vb2_queue); > > + struct device *dev = &pipe->dip_dev->pdev->dev; > > + const struct v4l2_format *fmt = &node->vdev_fmt; > > + unsigned int size; > > + int i; > > + > > + if (vb->vb2_queue->type == V4L2_BUF_TYPE_META_CAPTURE || > > + vb->vb2_queue->type == V4L2_BUF_TYPE_META_OUTPUT){ > > + if (vb->planes[0].length < fmt->fmt.meta.buffersize) { > > For OUTPUT we need to check bytesused and also it must be equal to the > metadata size in that case. I will check bytesused for OUTPUT. > > > + dev_dbg(dev, > > + "%s:%s:%s: size error(user:%d, required:%d)\n", > > + __func__, pipe->desc->name, node->desc->name, > > + vb->planes[0].length, fmt->fmt.meta.buffersize); > > + return -EINVAL; > > + } else { > > + return 0; > > + } > > This comment will not apply anymore if we split to separate vb2 ops for meta > queues, but normally one would put tis return 0 outside of the if block. I will put the return 0 outside the if block. > > > + } > > + > > + for (i = 0; i < vb->num_planes; i++) { > > + size = fmt->fmt.pix_mp.plane_fmt[i].sizeimage; > > + if (vb->planes[i].length < size) { > > + dev_dbg(dev, > > + "%s:%s:%s: size error(user:%d, max:%d)\n", > > + __func__, pipe->desc->name, node->desc->name, > > + vb->planes[i].length, size); > > + return -EINVAL; > > + } > > + } > > + > > + return 0; > > +} > > + > > +static int mtk_dip_vb2_buf_out_validate(struct vb2_buffer *vb) > > +{ > > + struct vb2_v4l2_buffer *v4l2_buf = to_vb2_v4l2_buffer(vb); > > + > > + if (v4l2_buf->field == V4L2_FIELD_ANY) > > + v4l2_buf->field = V4L2_FIELD_NONE; > > + > > + if (v4l2_buf->field != V4L2_FIELD_NONE) > > + return -EINVAL; > > + > > + return 0; > > +} > > + > > +static int mtk_dip_vb2_queue_buf_init(struct vb2_buffer *vb) > > +{ > > + struct vb2_v4l2_buffer *b = to_vb2_v4l2_buffer(vb); > > + struct mtk_dip_dev_buffer *dev_buf = mtk_dip_vb2_buf_to_dev_buf(vb); > > + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vb->vb2_queue); > > + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vb->vb2_queue); > > + int i; > > + > > + for (i = 0; i < vb->num_planes; i++) { > > + if (node->desc->smem_alloc) { > > Rather than having two completely different conditional blocks, could we > have different vb2 ops for video and meta queues? Yes, I will separate it into video and meta queues vb ops. > > > + void *cpu_addr; > > + phys_addr_t buf_paddr; > > + > > + dev_buf->scp_daddr[i] = > > + vb2_dma_contig_plane_dma_addr(vb, i); > > + cpu_addr = vb2_plane_vaddr(vb, i); > > + if (!cpu_addr) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s:%s: vb2_plane_vaddr NULL: s_daddr(%pad)\n", > > + pipe->desc->name, node->desc->name, > > + &dev_buf->scp_daddr[i]); > > + return -EINVAL; > > + } > > Why do we need cpu_addr here? It's not used any further. I will remove the cpu_addr here. > > > + > > + /* > > + * We got the incorrect physical address mapped when > > + * using dma_map_single() so I used dma_map_page_attrs() > > + * directly to workaround here. Please see the detail in > > + * mtk_dip-sys.c > > + */ > > + buf_paddr = dev_buf->scp_daddr[i]; > > + dev_buf->isp_daddr[i] = > > + dma_map_page_attrs(&pipe->dip_dev->pdev->dev, > > + phys_to_page(buf_paddr), > > + 0, vb->planes[i].length, > > + DMA_BIDIRECTIONAL, > > Is it really bidirectional? I think this would depend on whether it's OUTPUT > or CAPTURE. I will set it to DMA_TO_DEVICE for video OUTPUT nodes, DMA_FROM_DEVICE for video CAPTURE node and DMA_BIDIRECTIONAL for the meta output node. > > > + DMA_ATTR_SKIP_CPU_SYNC); > > + if (dma_mapping_error(&pipe->dip_dev->pdev->dev, > > + dev_buf->isp_daddr[i])) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s:%s: failed to map buffer: s_daddr(%pad)\n", > > + pipe->desc->name, node->desc->name, > > + &dev_buf->scp_daddr[i]); > > + return -EINVAL; > > + } > > + } else { > > + dev_buf->scp_daddr[i] = 0; > > + dev_buf->isp_daddr[i] = > > + vb2_dma_contig_plane_dma_addr(vb, i); > > + } > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s: buf type(%d), idx(%d), mem(%d), p(%d) i_daddr(%pad), s_daddr(%pad)\n", > > + pipe->desc->name, node->desc->name, b->vb2_buf.type, > > + b->vb2_buf.index, b->vb2_buf.memory, i, > > + &dev_buf->isp_daddr[i], &dev_buf->scp_daddr[i]); > > + } > > + > > + return 0; > > +} > > + > > +static void mtk_dip_vb2_queue_buf_cleanup(struct vb2_buffer *vb) > > +{ > > + struct mtk_dip_dev_buffer *dev_buf = mtk_dip_vb2_buf_to_dev_buf(vb); > > + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vb->vb2_queue); > > + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vb->vb2_queue); > > + int i; > > + > > + if (!node->desc->smem_alloc) > > + return; > > + > > + for (i = 0; i < vb->num_planes; i++) { > > + if (node->desc->smem_alloc) > > This was already checked few lines above. I will remove the check here. > > > + dma_unmap_page_attrs(&pipe->dip_dev->pdev->dev, > > + dev_buf->isp_daddr[i], > > + vb->planes[i].length, > > + DMA_BIDIRECTIONAL, > > + DMA_ATTR_SKIP_CPU_SYNC); > > + } > > +} > > + > > +static void mtk_dip_vb2_buf_queue(struct vb2_buffer *vb) > > +{ > > + struct vb2_v4l2_buffer *b = to_vb2_v4l2_buffer(vb); > > + struct mtk_dip_dev_buffer *dev_buf = mtk_dip_vb2_buf_to_dev_buf(vb); > > + struct mtk_dip_request *req = (struct mtk_dip_request *)vb->request; > > + struct mtk_dip_video_device *node = > > + mtk_dip_vbq_to_node(vb->vb2_queue); > > + int buf_count; > > + > > + dev_buf->fmt = node->vdev_fmt; > > + dev_buf->dev_fmt = node->dev_q.dev_fmt; > > + dev_buf->dma_port = node->desc->dma_port; > > + dev_buf->rotation = node->dev_q.rotation; > > + > > + dev_dbg(&req->dip_pipe->dip_dev->pdev->dev, > > Sounds like it might be beneficial to have a local variable for dip_dev. I got it. > > > + "%s:%s: buf type(%d), idx(%d), mem(%d), i_daddr(%pad), s_daddr(%pad)\n", > > + req->dip_pipe->desc->name, node->desc->name, b->vb2_buf.type, > > + b->vb2_buf.index, b->vb2_buf.memory, &dev_buf->isp_daddr, > > + &dev_buf->scp_daddr); > > + > > + spin_lock(&node->buf_list_lock); > > + list_add_tail(&dev_buf->list, &node->buf_list); > > + spin_unlock(&node->buf_list_lock); > > + > > + buf_count = atomic_dec_return(&req->buf_count); > > + if (!buf_count) { > > + mutex_lock(&req->dip_pipe->lock); > > + mtk_dip_pipe_try_enqueue(req->dip_pipe); > > + mutex_unlock(&req->dip_pipe->lock); > > + } > > + > > + dev_dbg(&req->dip_pipe->dip_dev->pdev->dev, > > + "%s:%s:%s:%s:buf_count(%d)\n", > > + __func__, req->dip_pipe->desc->name, node->desc->name, > > + req->req.debug_str, buf_count); > > +} > > + > > +static int mtk_dip_vb2_queue_setup(struct vb2_queue *vq, > > + unsigned int *num_buffers, > > + unsigned int *num_planes, > > + unsigned int sizes[], > > + struct device *alloc_devs[]) > > +{ > > + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vq); > > + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vq); > > + const struct v4l2_format *fmt = &node->vdev_fmt; > > + unsigned int size; > > + int i; > > + > > + vq->dma_attrs |= DMA_ATTR_NON_CONSISTENT; > > Please keep this a downstream patch added on top of the driver patches. I got it. I will use a separated patch and add it on the top of the driver patches. > > > + > > + if (!*num_planes) { > > + *num_planes = 1; > > + sizes[0] = fmt->fmt.pix_mp.plane_fmt[0].sizeimage; > > + } > > + > > + if (node->desc->id == MTK_DIP_VIDEO_NODE_ID_TUNING_OUT) { > > + int max_meta_bufs_per_pipe; > > + > > + size = fmt->fmt.meta.buffersize; > > + max_meta_bufs_per_pipe = > > + MTK_DIP_DEV_META_BUF_POOL_MAX_SIZE / > > + round_up(size, PAGE_SIZE) / MTK_DIP_PIPE_ID_TOTAL_NUM; > > + *num_buffers = clamp_val(*num_buffers, 1, > > + max_meta_bufs_per_pipe); > > + sizes[0] = size; > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s:%s: n_p(%d), n_b(%d), s[%d](%u)\n", > > + __func__, pipe->desc->name, node->desc->name, > > + *num_planes, *num_buffers, 0, sizes[0]); > > + > > nit: Stray blank line. I will remove the line. > > > + } else { > > + for (i = 0; i < *num_planes; i++) { > > + if (sizes[i] < fmt->fmt.pix_mp.plane_fmt[i].sizeimage) { > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s:%s: invalid buf: %u < %u\n", > > + __func__, pipe->desc->name, > > + node->desc->name, sizes[0], size); > > + return -EINVAL; > > + } > > + sizes[i] = fmt->fmt.pix_mp.plane_fmt[i].sizeimage; > > For VIDIOC_CREATEBUFS we also need to handle the case when *num_planes > 0 > and then we need to honor the values already present in sizes[]. (Note that > the code above overrides *num_planes to 1, so we lose the information. The > code needs to be restructured to handle that.) We overrides *num_planes when *num_planes is 0. Is the modification I need to do to keep the original value of size[]? if (!*num_planes) { *num_planes = 1; sizes[0] = fmt->fmt.pix_mp.plane_fmt[0].sizeimage; } > > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s:%s: n_p(%d), n_b(%d), s[%d](%u)\n", > > + __func__, pipe->desc->name, node->desc->name, > > + *num_planes, *num_buffers, i, sizes[i]); > > + } > > + } > > + > > + return 0; > > +} > > + > > +static void mtk_dip_return_all_buffers(struct mtk_dip_pipe *pipe, > > + struct mtk_dip_video_device *node, > > + enum vb2_buffer_state state) > > +{ > > + struct mtk_dip_dev_buffer *b, *b0; > > + > > + spin_lock(&node->buf_list_lock); > > + list_for_each_entry_safe(b, b0, &node->buf_list, list) { > > + list_del(&b->list); > > + if (b->vbb.vb2_buf.state == VB2_BUF_STATE_ACTIVE) > > Are you seeing some buffers with state other than ACTIVE here? If so, that's > a bug somewhere else in the driver, which needs to be fixed. This check > shouldn't be here. No. I will remove the check here. > > > + vb2_buffer_done(&b->vbb.vb2_buf, state); > > + } > > + spin_unlock(&node->buf_list_lock); > > +} > > + > > +static int mtk_dip_vb2_start_streaming(struct vb2_queue *vq, unsigned int count) > > +{ > > + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vq); > > + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vq); > > + int cnt_node_ns; > > + int ret; > > + > > + if (!(node->flags & MEDIA_LNK_FL_ENABLED)) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s:%s: stream on failed, node is not enabled\n", > > + pipe->desc->name, node->desc->name); > > + > > + ret = -ENOLINK; > > + goto fail_return_bufs; > > + } > > + > > + mutex_lock(&pipe->lock); > > + cnt_node_ns = atomic_dec_return(&pipe->cnt_nodes_not_streaming); > > + mutex_unlock(&pipe->lock); > > This still isn't really synchronized. One could disable the link at this > point. I believe that in the previous round of the review I suggested > checking the enable state after calling media_pipeline_start(), because it > locks the enable status for links that don't have the DYNAMIC flag. That > would solve the problem. I will check the enabling state after calling media_pipeline_start() as following: mutex_lock(&pipe->lock); if(!pipe->nodes_streaming) { ret = media_pipeline_start(&node->vdev.entity, &pipe->pipeline); /* ...... */ } pipe->nodes_streaming |= node->desc->id; if (pipe->nodes_streaming == pipe->nodes_enabled) { ret = v4l2_subdev_call(&pipe->subdev, video, s_stream, 1); /* ...... */ } mutex_unlock(&pipe->lock); > > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s:%s cnt_nodes_not_streaming(%d)\n", > > + __func__, pipe->desc->name, node->desc->name, cnt_node_ns); > > + > > + if (cnt_node_ns) > > + return 0; > > + > > + ret = media_pipeline_start(&node->vdev.entity, &pipe->pipeline); > > + if (ret < 0) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s:%s: media_pipeline_start failed(%d)\n", > > + pipe->desc->name, node->desc->name, ret); > > + > > + goto fail_return_bufs; > > + } > > + > > + /* Start streaming of the whole pipeline */ > > + ret = v4l2_subdev_call(&pipe->subdev, video, s_stream, 1); > > + if (ret < 0) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s:%s: sub dev s_stream(1) failed(%d)\n", > > + pipe->desc->name, node->desc->name, ret); > > + > > + goto fail_stop_pipeline; > > + } > > + > > + return 0; > > + > > +fail_stop_pipeline: > > + media_pipeline_stop(&node->vdev.entity); > > + > > +fail_return_bufs: > > + mtk_dip_return_all_buffers(pipe, node, VB2_BUF_STATE_QUEUED); > > + > > + return ret; > > +} > > + > > +static void mtk_dip_vb2_stop_streaming(struct vb2_queue *vq) > > +{ > > + struct mtk_dip_pipe *pipe = vb2_get_drv_priv(vq); > > + struct mtk_dip_video_device *node = mtk_dip_vbq_to_node(vq); > > + int ret; > > + int count; > > + int is_pipe_streamon; > > + > > + WARN_ON(!(node->flags & MEDIA_LNK_FL_ENABLED)); > > + > > + mutex_lock(&pipe->lock); > > + count = atomic_inc_return(&pipe->cnt_nodes_not_streaming); > > + is_pipe_streamon = pipe->streaming; > > + mutex_unlock(&pipe->lock); > > + > > We protect the access to pipe->streaming with the mutex above, but do we > have any guarantee that after we release the mutex the value doesn't change? > > We should likely do the whole stop operation holding the pipe lock. I will hold pipe->lock when doing the whole stop operation. > > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s:%s cnt_nodes_not_streaming(%d), is_pipe_streamon(%d)\n", > > + __func__, pipe->desc->name, node->desc->name, count, > > + is_pipe_streamon); > > + > > + if (count && is_pipe_streamon) { > > For v4l2_subdev_call() shouldn't this be !count && is_pipe_streamon? Do you mean that pipe->subdev's stop stream should be called after all video device are stream off, not the first video device's stream off? > > > + ret = v4l2_subdev_call(&pipe->subdev, video, s_stream, 0); > > + if (ret) > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s:%s: sub dev s_stream(0) failed(%d)\n", > > + pipe->desc->name, node->desc->name, ret); > > + media_pipeline_stop(&node->vdev.entity); > > We should do this one when the last node stops streaming to solve the > enable state locking issue as described in my comment to _start_streaming(). I will do this when the last node stops streaming. > > > + } > > + > > + mtk_dip_return_all_buffers(pipe, node, VB2_BUF_STATE_ERROR); > > +} > > + > > +static int mtk_dip_videoc_querycap(struct file *file, void *fh, > > + struct v4l2_capability *cap) > > +{ > > + struct mtk_dip_pipe *pipe = video_drvdata(file); > > + > > + strlcpy(cap->driver, pipe->desc->name, > > + sizeof(cap->driver)); > > + strlcpy(cap->card, pipe->desc->name, > > + sizeof(cap->card)); > > + snprintf(cap->bus_info, sizeof(cap->bus_info), > > + "platform:%s", dev_name(pipe->dip_dev->mdev.dev)); > > + > > + return 0; > > +} > > + > > +static int mtk_dip_videoc_try_fmt(struct file *file, void *fh, > > + struct v4l2_format *f) > > I don't see this function returning any error codes. Please make it void. mtk_dip_videoc_try_fmt() is used as vidioc_try_fmt_vid_out_mplane op. Using void seems to make it incompatible with vidioc_try_fmt_vid_out_mplane. .vidioc_try_fmt_vid_out_mplane = mtk_dip_videoc_try_fmt, int (*vidioc_try_fmt_vid_out_mplane)(struct file *file, void *fh, struct v4l2_format *f); > > > +{ > > + struct mtk_dip_pipe *pipe = video_drvdata(file); > > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > > + const struct mtk_dip_dev_format *dev_fmt; > > + struct v4l2_format try_fmt; > > + > > + memset(&try_fmt, 0, sizeof(try_fmt)); > > + try_fmt.type = node->dev_q.vbq.type; > > This should come from f.type and should have been already validated by the core. > > Actually, why don't we use f directly? I will use f directly. > > > > + dev_fmt = mtk_dip_pipe_find_fmt(pipe, node, > > + f->fmt.pix_mp.pixelformat); > > + > > + if (!dev_fmt) { > > + dev_fmt = &node->desc->fmts[node->desc->default_fmt_idx]; > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s:%s: dev_fmt(%d) not found, use default(%d)\n", > > + __func__, pipe->desc->name, node->desc->name, > > + f->fmt.pix_mp.pixelformat, dev_fmt->format); > > + } > > + > > + if (V4L2_TYPE_IS_OUTPUT(node->desc->buf_type)) { > > + try_fmt.fmt.pix_mp.width = clamp_val(f->fmt.pix_mp.width, > > + MTK_DIP_OUTPUT_MIN_WIDTH, > > + MTK_DIP_OUTPUT_MAX_WIDTH); > > + try_fmt.fmt.pix_mp.height = > > + clamp_val(f->fmt.pix_mp.height, > > + MTK_DIP_OUTPUT_MIN_HEIGHT, > > + MTK_DIP_OUTPUT_MAX_HEIGHT); > > + } else { > > + try_fmt.fmt.pix_mp.width = clamp_val(f->fmt.pix_mp.width, > > + MTK_DIP_CAPTURE_MIN_WIDTH, > > + MTK_DIP_CAPTURE_MAX_WIDTH); > > + try_fmt.fmt.pix_mp.height = > > + clamp_val(f->fmt.pix_mp.height, > > + MTK_DIP_CAPTURE_MIN_HEIGHT, > > + MTK_DIP_CAPTURE_MAX_HEIGHT); > > + } > > We have these limits already as a part of the frmsizeenum field of the > mtk_dip_video_device_desc struct. Could we just use that and remove the > conditional handling? I will use frmsizeenum field instead the conditional handling. > > > + > > + node->dev_q.dev_fmt = dev_fmt; > > Why are we changing the format on the node inside TRY_FMT? It is a bug. I will remove it. > > > + try_fmt.fmt.pix_mp.field = V4L2_FIELD_NONE; > > + mtk_dip_pipe_set_img_fmt(pipe, node, &try_fmt.fmt.pix_mp, dev_fmt); > > + > > + *f = try_fmt; > > + > > + return 0; > > +} > > + > > +static int mtk_dip_videoc_g_fmt(struct file *file, void *fh, > > + struct v4l2_format *f) > > +{ > > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > > + > > + *f = node->vdev_fmt; > > + > > + return 0; > > +} > > + > > +static int mtk_dip_videoc_s_fmt(struct file *file, void *fh, > > + struct v4l2_format *f) > > +{ > > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > > + struct mtk_dip_pipe *pipe = video_drvdata(file); > > + int ret; > > + > > + if (pipe->streaming) > > + return -EBUSY; > > We should use vb2_is_busy() here, because it's not allowed to change formats > after allocating buffers. I will use vb2_is_busy here. > > > + > > + ret = mtk_dip_videoc_try_fmt(file, fh, f); > > + if (!ret) > > + node->vdev_fmt = *f; > > + > > + return ret; > > +} > > + > > +static int mtk_dip_videoc_enum_framesizes(struct file *file, void *priv, > > + struct v4l2_frmsizeenum *sizes) > > +{ > > + struct mtk_dip_pipe *pipe = video_drvdata(file); > > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > > + const struct mtk_dip_dev_format *dev_fmt; > > + > > + dev_fmt = mtk_dip_pipe_find_fmt(pipe, node, sizes->pixel_format); > > + > > + if (!dev_fmt || sizes->index) > > + return -EINVAL; > > + > > + sizes->type = node->desc->frmsizeenum->type; > > + sizes->stepwise.max_width = > > + node->desc->frmsizeenum->stepwise.max_width; > > + sizes->stepwise.min_width = > > + node->desc->frmsizeenum->stepwise.min_width; > > + sizes->stepwise.max_height = > > + node->desc->frmsizeenum->stepwise.max_height; > > + sizes->stepwise.min_height = > > + node->desc->frmsizeenum->stepwise.min_height; > > + sizes->stepwise.step_height = > > + node->desc->frmsizeenum->stepwise.step_height; > > + sizes->stepwise.step_width = > > + node->desc->frmsizeenum->stepwise.step_width; > > + > > + return 0; > > +} > > + > > +static int mtk_dip_videoc_enum_fmt(struct file *file, void *fh, > > + struct v4l2_fmtdesc *f) > > +{ > > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > > + > > + if (f->index >= node->desc->num_fmts) > > + return -EINVAL; > > + > > + strscpy(f->description, node->desc->description, > > + sizeof(f->description)); > > + f->pixelformat = node->desc->fmts[f->index].format; > > + f->flags = 0; > > + > > + return 0; > > +} > > + > > +static int mtk_dip_meta_enum_format(struct file *file, void *fh, > > + struct v4l2_fmtdesc *f) > > +{ > > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > > + > > + if (f->index > 0) > > + return -EINVAL; > > + > > + strscpy(f->description, node->desc->description, > > + sizeof(f->description)); > > + > > + f->pixelformat = node->vdev_fmt.fmt.meta.dataformat; > > + f->flags = 0; > > + > > + return 0; > > +} > > + > > +static int mtk_dip_videoc_g_meta_fmt(struct file *file, void *fh, > > + struct v4l2_format *f) > > +{ > > + struct mtk_dip_video_device *node = mtk_dip_file_to_node(file); > > + *f = node->vdev_fmt; > > + > > + return 0; > > +} > > + > > +static int handle_buf_rotate_config(struct v4l2_ctrl *ctrl) > > +{ > > + struct mtk_dip_video_device *node = > > + container_of(ctrl->handler, struct mtk_dip_video_device, > > + ctrl_handler); > > + > > + if (ctrl->val != 0 && ctrl->val != 90 && > > + ctrl->val != 180 && ctrl->val != 270) { > > + pr_err("%s: Invalid buffer rotation %d", node->desc->name, > > + ctrl->val); > > + return -EINVAL; > > + } > > There is no need to check this here, because the framework already ensures > the values are valid. I will remove the checks. > > > + > > + node->dev_q.rotation = ctrl->val; > > Given the above, this could be just put directly into > mtk_dip_video_device_s_ctrl(). I will move the content of handle_buf_rotate_config to mtk_dip_video_device_s_ctrl(). > > > + > > + return 0; > > +} > > + > > +static int mtk_dip_video_device_s_ctrl(struct v4l2_ctrl *ctrl) > > +{ > > + int ret = 0; > > + > > + switch (ctrl->id) { > > + case V4L2_CID_ROTATE: > > + ret = handle_buf_rotate_config(ctrl); > > nit: We can just return directly from here. I got it. > > > + break; > > + default: > > + break; > > There should be no need to handle default here, as the control framework > will not call us with any settable controls we haven't explicitly > registered. I got it. > > > + } > > + > > + return ret; > > +} > > + > > +/******************** function pointers ********************/ > > + > > +static const struct v4l2_subdev_internal_ops mtk_dip_subdev_internal_ops = { > > + .open = mtk_dip_subdev_open, > > + .close = mtk_dip_subdev_close, > > +}; > > + > > +static const struct v4l2_subdev_video_ops mtk_dip_subdev_video_ops = { > > + .s_stream = mtk_dip_subdev_s_stream, > > +}; > > + > > +static const struct v4l2_subdev_ops mtk_dip_subdev_ops = { > > + .video = &mtk_dip_subdev_video_ops, > > +}; > > + > > +static const struct media_entity_operations mtk_dip_media_ops = { > > + .link_setup = mtk_dip_link_setup, > > + .link_validate = v4l2_subdev_link_validate, > > +}; > > + > > +static struct media_request *mtk_dip_request_alloc(struct media_device *mdev) > > +{ > > + return kzalloc(sizeof(struct mtk_dip_request), GFP_KERNEL); > > That's potentially error-prone. I'd add a properly typed local variable, > let's say mtk_req, allocate with sizeof(*mtk_req) and then return > &mtk_dev->req. I got it. I will change the codes as following: struct mtk_dip_request mtk_req; mtk_req = kzalloc(sizeof(*mtk_req), GFP_KERNEL); return &mtk_req->req; > > > +} > > + > > +static void mtk_dip_request_free(struct media_request *req) > > +{ > > A similar comment her. Please retrieve mtk_dip_request pointer properly > using a helper (with container_of() inside) to a local variable and then > free it. I got it. > > > + kfree(req); > > +} > > + > > +static int mtk_dip_vb2_request_validate(struct media_request *req) > > +{ > > + struct media_request_object *obj; > > + struct mtk_dip_dev *dip_dev = mtk_dip_mdev_to_dev(req->mdev); > > + struct mtk_dip_request *dip_req = (struct mtk_dip_request *)req; > > Please avoid such direct casts and use properly typed helpers instead, using > container_of() if needed. I got it. > > > + struct mtk_dip_pipe *pipe = NULL; > > + struct mtk_dip_pipe *pipe_prev = NULL; > > + struct mtk_dip_dev_buffer **map = dip_req->job_info.buf_map; > > + int buf_count = 0; > > + > > + memset(map, 0, sizeof(dip_req->job_info.buf_map)); > > + > > + list_for_each_entry(obj, &req->objects, list) { > > + struct vb2_buffer *vb; > > + struct mtk_dip_dev_buffer *dev_buf; > > + struct mtk_dip_video_device *node; > > + > > + if (!vb2_request_object_is_buffer(obj)) > > + continue; > > + > > + vb = container_of(obj, struct vb2_buffer, req_obj); > > + node = mtk_dip_vbq_to_node(vb->vb2_queue); > > + pipe = vb2_get_drv_priv(vb->vb2_queue); > > + if (pipe_prev && pipe != pipe_prev) { > > + dev_warn(&dip_dev->pdev->dev, > > + "%s:%s:%s:found buf of different pipes(%p,%p)\n", > > + __func__, node->desc->name, > > + req->debug_str, pipe, pipe_prev); > > Userspace misbehavior should not trigger kernel warnings. Please make this > dev_dbg(). I got it. > > > + return -EINVAL; > > + } > > + > > + pipe_prev = pipe; > > + dev_buf = mtk_dip_vb2_buf_to_dev_buf(vb); > > + dip_req->job_info.buf_map[node->desc->id] = dev_buf; > > + buf_count++; > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s: added buf(%p) to pipe-job(%p), buf_count(%d)\n", > > + pipe->desc->name, node->desc->name, dev_buf, > > + dip_req->job_info, buf_count); > > + } > > + > > + if (!pipe) { > > + dev_warn(&dip_dev->pdev->dev, > > + "%s: no buffer in the request(%p)\n", > > + req->debug_str, req); > > + > > + return vb2_request_validate(req); > > Shouldn't this be an error? Yes. I will return -EINVAL here. > > > + } > > + > > + /* > > + * Workaround to pass V4L2 comliance test since it can't know > > + * which buffer is required and may enqueue only 1 buffer. > > + * It seems that we should return an error here and let the > > + * user to enqueue required buffer instead of showing a debug > > + * message only. > > + */ > > + if (!map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT] || > > + (!map[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE] && > > + !map[MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE])) > > + dev_dbg(&dip_dev->pdev->dev, > > + "won't trigger hw job: raw(%p), mdp0(%p), mdp1(%p)\n", > > + map[MTK_DIP_VIDEO_NODE_ID_RAW_OUT], > > + map[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE], > > + map[MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE]); > > + > > + atomic_set(&dip_req->buf_count, buf_count); > > + dip_req->job_info.id = mtk_dip_pipe_next_job_id(pipe); > > + dip_req->dip_pipe = pipe; > > + mtk_dip_pipe_debug_job(pipe, &dip_req->job_info); > > + > > + spin_lock(&pipe->job_lock); > > + list_add_tail(&dip_req->job_info.list, &pipe->pipe_job_pending_list); > > + pipe->num_pending_jobs++; > > .req_validate() must not change any driver state (e.g. internal queues). It > should only validate the request itself. The proper place do to this is > .req_queue(). I will move the pending job adding codes to .req_queue(). > > > + dev_dbg(&dip_dev->pdev->dev, > > + "%s:%s: current num of pending jobs(%d)\n", > > + __func__, pipe->desc->name, pipe->num_pending_jobs); > > + spin_unlock(&pipe->job_lock); > > + > > + return vb2_request_validate(req); > > +} > > + > > +static const struct media_device_ops mtk_dip_media_req_ops = { > > + .req_validate = mtk_dip_vb2_request_validate, > > + .req_queue = vb2_request_queue, > > + .req_alloc = mtk_dip_request_alloc, > > + .req_free = mtk_dip_request_free, > > +}; > > + > > +static const struct v4l2_ctrl_ops mtk_dip_video_device_ctrl_ops = { > > + .s_ctrl = mtk_dip_video_device_s_ctrl, > > +}; > > + > > +static const struct vb2_ops mtk_dip_vb2_ops = { > > + .buf_queue = mtk_dip_vb2_buf_queue, > > + .queue_setup = mtk_dip_vb2_queue_setup, > > + .buf_init = mtk_dip_vb2_queue_buf_init, > > + .buf_prepare = mtk_dip_vb2_buf_prepare, > > + .buf_out_validate = mtk_dip_vb2_buf_out_validate, > > + .buf_cleanup = mtk_dip_vb2_queue_buf_cleanup, > > + .start_streaming = mtk_dip_vb2_start_streaming, > > + .stop_streaming = mtk_dip_vb2_stop_streaming, > > + .wait_prepare = vb2_ops_wait_prepare, > > + .wait_finish = vb2_ops_wait_finish, > > +}; > > + > > +static const struct v4l2_file_operations mtk_dip_v4l2_fops = { > > + .unlocked_ioctl = video_ioctl2, > > + .open = v4l2_fh_open, > > + .release = vb2_fop_release, > > + .poll = vb2_fop_poll, > > + .mmap = vb2_fop_mmap, > > +#ifdef CONFIG_COMPAT > > + .compat_ioctl32 = v4l2_compat_ioctl32, > > +#endif > > +}; > > + > > +int mtk_dip_dev_media_register(struct device *dev, > > + struct media_device *media_dev, > > + const char *model) > > +{ > > + int ret; > > + > > + media_dev->dev = dev; > > + strlcpy(media_dev->model, model, sizeof(media_dev->model)); > > Could we just use dev_driver_string() instead? I will use dev_driver_string() instead. > > > + snprintf(media_dev->bus_info, sizeof(media_dev->bus_info), > > + "platform:%s", dev_name(dev)); > > + media_dev->hw_revision = 0; > > + media_dev->ops = &mtk_dip_media_req_ops; > > + media_device_init(media_dev); > > + > > + ret = media_device_register(media_dev); > > + if (ret) { > > + dev_err(dev, "failed to register media device (%d)\n", ret); > > + media_device_unregister(media_dev); > > + media_device_cleanup(media_dev); > > Please return from here to make it clear which code is for failure and which > for success. I got it. > > > + } > > + > > + dev_dbg(dev, "Registered media device: %s, %p", media_dev->model, > > + media_dev); > > + > > + return ret; > > And return 0 here. I got it. > > > +} > > + > > +int mtk_dip_dev_v4l2_register(struct device *dev, > > + struct media_device *media_dev, > > + struct v4l2_device *v4l2_dev) > > +{ > > + int ret; > > + > > + v4l2_dev->mdev = media_dev; > > + v4l2_dev->ctrl_handler = NULL; > > + > > + ret = v4l2_device_register(dev, v4l2_dev); > > + if (ret) { > > + dev_err(dev, "failed to register V4L2 device (%d)\n", ret); > > + v4l2_device_unregister(v4l2_dev); > > + } > > + > > + dev_dbg(dev, "Registered v4l2 device: %p", v4l2_dev); > > + > > + return ret; > > +} > > There is only 1 function call inside of this function, so there is not much > point in having a separate function for this. Please just move back to the > caller. I got it. > > > + > > +static int mtk_dip_video_device_v4l2_register(struct mtk_dip_pipe *pipe, > > + struct mtk_dip_video_device *node) > > +{ > > + struct vb2_queue *vbq = &node->dev_q.vbq; > > + struct video_device *vdev = &node->vdev; > > + struct media_link *link; > > + int ret; > > + > > + /* Initialize miscellaneous variables */ > > I'd remove comments like this, because this is obvious from reading the > code alone. I will remove the line. > > > + mutex_init(&node->dev_q.lock); > > + > > + /* Initialize formats to default values */ > > + vdev->device_caps = node->desc->cap; > > + vdev->ioctl_ops = node->desc->ops; > > + node->vdev_fmt.type = node->desc->buf_type; > > + mtk_dip_pipe_load_default_fmt(pipe, node, &node->vdev_fmt); > > + > > + /* Initialize media entities */ > > + ret = media_entity_pads_init(&vdev->entity, 1, &node->vdev_pad); > > + if (ret) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "failed initialize media entity (%d)\n", ret); > > + goto err_mutex_destroy; > > + } > > + > > + node->vdev_pad.flags = V4L2_TYPE_IS_OUTPUT(node->desc->buf_type) ? > > + MEDIA_PAD_FL_SOURCE : MEDIA_PAD_FL_SINK; > > + > > + /* Initialize vbq */ > > + vbq->type = node->vdev_fmt.type; > > + vbq->io_modes = VB2_MMAP | VB2_DMABUF; > > + vbq->ops = &mtk_dip_vb2_ops; > > + vbq->mem_ops = &vb2_dma_contig_memops; > > + vbq->supports_requests = true; > > + vbq->buf_struct_size = sizeof(struct mtk_dip_dev_buffer); > > + vbq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; > > This is a memory to memory device so this should be TIMESTAMP_COPY and the > driver should copy the time stamp from the input frame buffer to the output > buffers. I got it. I will use V4L2_BUF_FLAG_TIMESTAMP_COPY here. > > > + vbq->min_buffers_needed = 0; > > + vbq->drv_priv = pipe; > > + vbq->lock = &node->dev_q.lock; > > + > > + ret = vb2_queue_init(vbq); > > + if (ret) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s:%s:%s: failed to init vb2 queue(%d)\n", > > + __func__, pipe->desc->name, node->desc->name, > > + ret); > > + goto err_media_entity_cleanup; > > + } > > + > > + /* Initialize vdev */ > > + snprintf(vdev->name, sizeof(vdev->name), "%s %s", pipe->desc->name, > > + node->desc->name); > > + vdev->entity.name = vdev->name; > > + vdev->entity.function = MEDIA_ENT_F_IO_V4L; > > + vdev->entity.ops = NULL; > > + vdev->release = video_device_release_empty; > > + vdev->fops = &mtk_dip_v4l2_fops; > > + vdev->lock = &node->dev_q.lock; > > + vdev->ctrl_handler = &node->ctrl_handler; > > + vdev->v4l2_dev = &pipe->dip_dev->v4l2_dev; > > + vdev->queue = &node->dev_q.vbq; > > + vdev->vfl_dir = V4L2_TYPE_IS_OUTPUT(node->desc->buf_type) ? > > + VFL_DIR_TX : VFL_DIR_RX; > > + > > + if (node->desc->smem_alloc) { > > + vdev->queue->dev = &pipe->dip_dev->dip_hw.scp_pdev->dev; > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s: select smem_vb2_alloc_ctx(%p)\n", > > + pipe->desc->name, node->desc->name, > > + vdev->queue->dev); > > + } else { > > + vdev->queue->dev = &pipe->dip_dev->pdev->dev; > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "%s:%s: select default_vb2_alloc_ctx(%p)\n", > > + pipe->desc->name, node->desc->name, > > + &pipe->dip_dev->pdev->dev); > > + } > > + > > + video_set_drvdata(vdev, pipe); > > + > > + ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); > > + if (ret) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "failed to register video device (%d)\n", ret); > > + goto err_vb2_queue_release; > > + } > > + dev_dbg(&pipe->dip_dev->pdev->dev, "registered vdev: %s\n", > > + vdev->name); > > + > > + /* Create link between video node and the subdev pad */ > > + if (V4L2_TYPE_IS_OUTPUT(node->desc->buf_type)) > > + ret = media_create_pad_link(&vdev->entity, 0, > > + &pipe->subdev.entity, > > + node->desc->id, node->flags); > > + else > > + ret = media_create_pad_link(&pipe->subdev.entity, > > + node->desc->id, &vdev->entity, > > + 0, node->flags); > > + if (ret) > > + goto err_video_unregister_device; > > + > > + vdev->intf_devnode = media_devnode_create(&pipe->dip_dev->mdev, > > + MEDIA_INTF_T_V4L_VIDEO, 0, > > + VIDEO_MAJOR, vdev->minor); > > + if (!vdev->intf_devnode) { > > + ret = -ENOMEM; > > + goto err_rm_links; > > + } > > + > > + link = media_create_intf_link(&vdev->entity, > > + &vdev->intf_devnode->intf, > > + node->flags); > > + if (!link) { > > + ret = -ENOMEM; > > + goto err_rm_devnode; > > + } > > + > > + return 0; > > + > > +err_rm_devnode: > > + media_devnode_remove(vdev->intf_devnode); > > + > > +err_rm_links: > > + media_entity_remove_links(&vdev->entity); > > + > > +err_video_unregister_device: > > + video_unregister_device(vdev); > > + > > +err_vb2_queue_release: > > + vb2_queue_release(&node->dev_q.vbq); > > + > > +err_media_entity_cleanup: > > + media_entity_cleanup(&node->vdev.entity); > > + > > +err_mutex_destroy: > > + mutex_destroy(&node->dev_q.lock); > > + > > + return ret; > > +} > > + > > +static int mtk_dip_pipe_v4l2_ctrl_init(struct mtk_dip_pipe *dip_pipe) > > +{ > > + struct mtk_dip_video_device *node; > > + int i; > > + > > + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) > > + v4l2_ctrl_handler_init(&dip_pipe->nodes[i].ctrl_handler, > > + V4L2_CID_MTK_DIP_MAX); > > Do we need to init the handler for nodes that don't expose any controls? No. I will init MDP 0 only (which support rotation ctrl). > > > + > > + /* Only MDP 0 support rotate in MT8183 */ > > + node = &dip_pipe->nodes[MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE]; > > + if (v4l2_ctrl_new_std(&node->ctrl_handler, > > + &mtk_dip_video_device_ctrl_ops, > > + V4L2_CID_ROTATE, 0, 270, 90, 0) == NULL) { > > + dev_err(&dip_pipe->dip_dev->pdev->dev, > > + "%s create rotate ctrl failed:(%d)", > > + node->desc->name, node->ctrl_handler.error); > > + > > + return -EPROBE_DEFER; > > Why defer here? Isn't this just a critical error? I will return -EINVAL instead. > > Also, the proper way to check for control registration error is to check the > control handler error rather than the control pointer. > > An example registration code: > https://elixir.bootlin.com/linux/v5.3-rc2/source/drivers/media/platform/qcom/venus/vdec_ctrls.c#L79 I will use ctrl_handler.error instead. > > > + } > > + > > + return 0; > > +} > > + > > +static void mtk_dip_pipe_v4l2_ctrl_release(struct mtk_dip_pipe *dip_pipe) > > +{ > > + int i; > > + > > + for (i = 0; i < MTK_DIP_VIDEO_NODE_ID_TOTAL_NUM; i++) > > + v4l2_ctrl_handler_free(&dip_pipe->nodes[i].ctrl_handler); > > +} > > + > > +int mtk_dip_pipe_v4l2_register(struct mtk_dip_pipe *pipe, > > + struct media_device *media_dev, > > + struct v4l2_device *v4l2_dev) > > +{ > > + int i, ret; > > + > > + ret = mtk_dip_pipe_v4l2_ctrl_init(pipe); > > + if (ret) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "%s: failed(%d) to initialize ctrls\n", > > + pipe->desc->name, ret); > > + > > + return ret; > > + } > > + > > + pipe->streaming = 0; > > + > > + /* Initialize subdev media entity */ > > + pipe->subdev_pads = devm_kcalloc(&pipe->dip_dev->pdev->dev, > > + pipe->num_nodes, > > + sizeof(*pipe->subdev_pads), > > + GFP_KERNEL); > > + if (!pipe->subdev_pads) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "failed to alloc pipe->subdev_pads (%d)\n", ret); > > + ret = -ENOMEM; > > + goto err_release_ctrl; > > + } > > + ret = media_entity_pads_init(&pipe->subdev.entity, > > + pipe->num_nodes, > > + pipe->subdev_pads); > > + if (ret) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "failed initialize subdev media entity (%d)\n", ret); > > + goto err_free_subdev_pads; > > + } > > + > > + /* Initialize subdev */ > > + v4l2_subdev_init(&pipe->subdev, &mtk_dip_subdev_ops); > > + > > + pipe->subdev.entity.function = > > + MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER; > > + pipe->subdev.entity.ops = &mtk_dip_media_ops; > > + pipe->subdev.flags = > > + V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; > > + pipe->subdev.ctrl_handler = NULL; > > + pipe->subdev.internal_ops = &mtk_dip_subdev_internal_ops; > > + > > + for (i = 0; i < pipe->num_nodes; i++) > > + pipe->subdev_pads[i].flags = > > + V4L2_TYPE_IS_OUTPUT(pipe->nodes[i].desc->buf_type) ? > > + MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE; > > Isn't this the other way around? I checked the document of MEDIA_PAD_FL_SINK and MEDIA_PAD_FL_SOURCE. It seems that the codes match the description. RAW Ouput video device: MEDIA_PAD_FL_SOURCE --> DIP sub dev: MEDIA_PAD_FL_SINK DIP sub dev: MEDIA_PAD_FL_SOURCE --> MDP Capture video device: MEDIA_PAD_FL_SINK MEDIA_PAD_FL_SINK: Input pad, relative to the entity. Input pads sink data and are targets of links. MEDIA_PAD_FL_SOURCE: Output pad, relative to the entity. Output pads source data and are origins of links. > > + > > + snprintf(pipe->subdev.name, sizeof(pipe->subdev.name), > > + "%s", pipe->desc->name); > > + v4l2_set_subdevdata(&pipe->subdev, pipe); > > + > > + ret = v4l2_device_register_subdev(&pipe->dip_dev->v4l2_dev, > > + &pipe->subdev); > > + if (ret) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "failed initialize subdev (%d)\n", ret); > > + goto err_media_entity_cleanup; > > + } > > + > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > + "register subdev: %s, ctrl_handler %p\n", > > + pipe->subdev.name, pipe->subdev.ctrl_handler); > > + > > + ret = v4l2_device_register_subdev_nodes(&pipe->dip_dev->v4l2_dev); > > + if (ret) { > > + dev_err(&pipe->dip_dev->pdev->dev, > > + "failed to register subdevs (%d)\n", ret); > > + goto err_unregister_subdev; > > + } > > This should be only called once for the v4l2_dev, but the code here would > end up calling this once per each pipe. I got it. I would move to the v4l2_device_register_subdev_nodes() call to mtk_dip_dev_v4l2_init. > > > + > > + /* Create video nodes and links */ > > + for (i = 0; i < pipe->num_nodes; i++) { > > + ret = mtk_dip_video_device_v4l2_register(pipe, > > + &pipe->nodes[i]); > > + if (ret) > > + goto err_unregister_subdev; > > + } > > + > > + return 0; > > + > > +err_unregister_subdev: > > + v4l2_device_unregister_subdev(&pipe->subdev); > > + > > +err_media_entity_cleanup: > > + media_entity_cleanup(&pipe->subdev.entity); > > + > > +err_free_subdev_pads: > > + devm_kfree(&pipe->dip_dev->pdev->dev, pipe->subdev_pads); > > + > > +err_release_ctrl: > > + mtk_dip_pipe_v4l2_ctrl_release(pipe); > > + > > + return ret; > > +} > > + > > +void mtk_dip_pipe_v4l2_unregister(struct mtk_dip_pipe *pipe) > > +{ > > + unsigned int i; > > + > > + for (i = 0; i < pipe->num_nodes; i++) { > > + video_unregister_device(&pipe->nodes[i].vdev); > > + vb2_queue_release(&pipe->nodes[i].dev_q.vbq); > > + media_entity_cleanup(&pipe->nodes[i].vdev.entity); > > + mutex_destroy(&pipe->nodes[i].dev_q.lock); > > + } > > + > > + v4l2_device_unregister_subdev(&pipe->subdev); > > + media_entity_cleanup(&pipe->subdev.entity); > > + v4l2_device_unregister(&pipe->dip_dev->v4l2_dev); > > Wouldn't this end up unregistering the same v4l2_dev more than 1 time? > Please make sure that the driver works when compiled as a module and then > unloaded and reloaded again. I will remove the duplicated v4l2_device_unregister(), media_device_unregister() and media_device_cleanup() here. > > > + media_device_unregister(&pipe->dip_dev->mdev); > > + media_device_cleanup(&pipe->dip_dev->mdev); > > + mtk_dip_pipe_v4l2_ctrl_release(pipe); > > +} > > + > > +/******************************************** > > + * MTK DIP V4L2 Settings * > > + ********************************************/ > > + > > +static const struct v4l2_ioctl_ops mtk_dip_v4l2_video_out_ioctl_ops = { > > + .vidioc_querycap = mtk_dip_videoc_querycap, > > + > > + .vidioc_enum_framesizes = mtk_dip_videoc_enum_framesizes, > > + .vidioc_enum_fmt_vid_cap_mplane = mtk_dip_videoc_enum_fmt, > > + .vidioc_g_fmt_vid_cap_mplane = mtk_dip_videoc_g_fmt, > > + .vidioc_s_fmt_vid_cap_mplane = mtk_dip_videoc_s_fmt, > > + .vidioc_try_fmt_vid_cap_mplane = mtk_dip_videoc_try_fmt, > > No need for cap ioctls on an out node. I will remove the caps ioctls here. > > > + > > + .vidioc_enum_fmt_vid_out_mplane = mtk_dip_videoc_enum_fmt, > > + .vidioc_g_fmt_vid_out_mplane = mtk_dip_videoc_g_fmt, > > + .vidioc_s_fmt_vid_out_mplane = mtk_dip_videoc_s_fmt, > > + .vidioc_try_fmt_vid_out_mplane = mtk_dip_videoc_try_fmt, > > + > > + .vidioc_reqbufs = vb2_ioctl_reqbufs, > > + .vidioc_create_bufs = vb2_ioctl_create_bufs, > > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, > > + .vidioc_querybuf = vb2_ioctl_querybuf, > > + .vidioc_qbuf = vb2_ioctl_qbuf, > > + .vidioc_dqbuf = vb2_ioctl_dqbuf, > > + .vidioc_streamon = vb2_ioctl_streamon, > > + .vidioc_streamoff = vb2_ioctl_streamoff, > > + .vidioc_expbuf = vb2_ioctl_expbuf, > > + > > + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, > > + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, > > +}; > > + > > +static const struct v4l2_ioctl_ops mtk_dip_v4l2_video_cap_ioctl_ops = { > > + .vidioc_querycap = mtk_dip_videoc_querycap, > > + > > + .vidioc_enum_framesizes = mtk_dip_videoc_enum_framesizes, > > + .vidioc_enum_fmt_vid_cap_mplane = mtk_dip_videoc_enum_fmt, > > + .vidioc_g_fmt_vid_cap_mplane = mtk_dip_videoc_g_fmt, > > + .vidioc_s_fmt_vid_cap_mplane = mtk_dip_videoc_s_fmt, > > + .vidioc_try_fmt_vid_cap_mplane = mtk_dip_videoc_try_fmt, > > + > > + .vidioc_enum_fmt_vid_out_mplane = mtk_dip_videoc_enum_fmt, > > + .vidioc_g_fmt_vid_out_mplane = mtk_dip_videoc_g_fmt, > > + .vidioc_s_fmt_vid_out_mplane = mtk_dip_videoc_s_fmt, > > + .vidioc_try_fmt_vid_out_mplane = mtk_dip_videoc_try_fmt, > > No need for out ioctls on a cap node. I will remove out caps ioctls here. > > > + > > + .vidioc_reqbufs = vb2_ioctl_reqbufs, > > + .vidioc_create_bufs = vb2_ioctl_create_bufs, > > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, > > + .vidioc_querybuf = vb2_ioctl_querybuf, > > + .vidioc_qbuf = vb2_ioctl_qbuf, > > + .vidioc_dqbuf = vb2_ioctl_dqbuf, > > + .vidioc_streamon = vb2_ioctl_streamon, > > + .vidioc_streamoff = vb2_ioctl_streamoff, > > + .vidioc_expbuf = vb2_ioctl_expbuf, > > + > > + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, > > + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, > > +}; > > + > > +static const struct v4l2_ioctl_ops mtk_dip_v4l2_meta_out_ioctl_ops = { > > + .vidioc_querycap = mtk_dip_videoc_querycap, > > + > > + .vidioc_enum_fmt_meta_cap = mtk_dip_meta_enum_format, > > + .vidioc_g_fmt_meta_cap = mtk_dip_videoc_g_meta_fmt, > > + .vidioc_s_fmt_meta_cap = mtk_dip_videoc_g_meta_fmt, > > + .vidioc_try_fmt_meta_cap = mtk_dip_videoc_g_meta_fmt, > > + > > + .vidioc_enum_fmt_meta_out = mtk_dip_meta_enum_format, > > + .vidioc_g_fmt_meta_out = mtk_dip_videoc_g_meta_fmt, > > + .vidioc_s_fmt_meta_out = mtk_dip_videoc_g_meta_fmt, > > + .vidioc_try_fmt_meta_out = mtk_dip_videoc_g_meta_fmt, > > + > > + .vidioc_reqbufs = vb2_ioctl_reqbufs, > > + .vidioc_create_bufs = vb2_ioctl_create_bufs, > > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, > > + .vidioc_querybuf = vb2_ioctl_querybuf, > > + .vidioc_qbuf = vb2_ioctl_qbuf, > > + .vidioc_dqbuf = vb2_ioctl_dqbuf, > > + .vidioc_streamon = vb2_ioctl_streamon, > > + .vidioc_streamoff = vb2_ioctl_streamoff, > > + .vidioc_expbuf = vb2_ioctl_expbuf, > > +}; > > + > > +static const struct mtk_dip_dev_format fw_param_fmts[] = { > > + { > > + .format = V4L2_META_FMT_MTISP_PARAMS, > > + .buffer_size = 1024 * 128, > > + }, > > +}; > > + > > +static const struct mtk_dip_dev_format in_fmts[] = { > > + { > > + .format = V4L2_PIX_FMT_MTISP_B10, > > + .mdp_color = MDP_COLOR_BAYER10, > > + .colorspace = V4L2_COLORSPACE_SRGB, > > + .depth = { 10 }, > > + .row_depth = { 10 }, > > + .num_planes = 1, > > + }, > > + { > > + .format = V4L2_PIX_FMT_MTISP_F10, > > + .mdp_color = MDP_COLOR_FULLG10, > > + .colorspace = V4L2_COLORSPACE_RAW, > > + .depth = { 15 }, > > + .row_depth = { 15 }, > > + .num_planes = 1, > > + }, > > + { > > + .format = V4L2_PIX_FMT_VYUY, > > + .mdp_color = MDP_COLOR_VYUY, > > + .colorspace = V4L2_COLORSPACE_BT2020, > > Is the color space tied to particular pixel format on hardware level? No. We can remove the colorspace setting here since it doesn't tied to particular pixel format. > > > + .depth = { 16 }, > > + .row_depth = { 16 }, > > + .num_planes = 1, > > + }, > > + { > > + .format = V4L2_PIX_FMT_YUYV, > > + .mdp_color = MDP_COLOR_YUYV, > > + .colorspace = V4L2_COLORSPACE_BT2020, > > + .depth = { 16 }, > > + .row_depth = { 16 }, > > + .num_planes = 1, > > + }, > > + { > > + .format = V4L2_PIX_FMT_YVYU, > > + .mdp_color = MDP_COLOR_YVYU, > > + .colorspace = V4L2_COLORSPACE_BT2020, > > + .depth = { 16 }, > > + .row_depth = { 16 }, > > + .num_planes = 1, > > + }, > > + { > > + .format = V4L2_PIX_FMT_NV12, > > + .mdp_color = MDP_COLOR_NV12, > > + .colorspace = V4L2_COLORSPACE_BT2020, > > + .depth = { 12 }, > > + .row_depth = { 8 }, > > + .num_planes = 1, > > + }, > > + { > > + .format = V4L2_PIX_FMT_YUV420M, > > + .mdp_color = MDP_COLOR_I420, > > + .colorspace = V4L2_COLORSPACE_BT2020, > > + .depth = { 8, 2, 2 }, > > + .row_depth = { 8, 4, 4 }, > > + .num_planes = 3, > > + }, > > + { > > + .format = V4L2_PIX_FMT_YVU420M, > > + .mdp_color = MDP_COLOR_YV12, > > + .colorspace = V4L2_COLORSPACE_BT2020, > > + .depth = { 8, 2, 2 }, > > + .row_depth = { 8, 4, 4 }, > > + .num_planes = 3, > > + }, > > + { > > + .format = V4L2_PIX_FMT_NV12M, > > + .mdp_color = MDP_COLOR_NV12, > > + .colorspace = V4L2_COLORSPACE_BT2020, > > + .depth = { 8, 4 }, > > + .row_depth = { 8, 8 }, > > What is depth and what is row_depth? They both seem to not match NV12, which > should have 16 bits per sample in the CbCr plane. Fow_depth is the bits of the pixel. Depth means the bytes per pixel of the image foramt. For example, Image: 640 * 480 YV12: row_depth = 8, depth = 12 Bytes per line = width * row_depth / 8 = 640 * 8/ 8 = 640 Image size = Bytes per line * height * (depth/ row_depth) = 640 * 480 * 1.5 Image: 640 * 480 Bytes per line(Y) = width * row_depth/ 8 = 640 Bytes per line(CbCr) = width * row_depth/ 8 = 640 Image size(Y) = Bytes per line * height * (depth/ row_depth) = 640 * 480 * 8/8 = 640 * 480 * 1 Image size(CbCr) = Bytes per line * height * (depth/ row_depth) = 640 * 480 * 4/8 = 640 * 480 * 0.5 > > > + .num_planes = 2, > > + }, > > +}; > > + > > +static const struct mtk_dip_dev_format out_fmts[] = { > > + { > > + .format = V4L2_PIX_FMT_VYUY, > > + .mdp_color = MDP_COLOR_VYUY, > > + .colorspace = MDP_YCBCR_PROFILE_BT601, > > + .depth = { 16 }, > > + .row_depth = { 16 }, > > + .num_planes = 1, > > + }, > > + { > > + .format = V4L2_PIX_FMT_YUYV, > > + .mdp_color = MDP_COLOR_YUYV, > > + .colorspace = MDP_YCBCR_PROFILE_BT601, > > + .depth = { 16 }, > > + .row_depth = { 16 }, > > + .num_planes = 1, > > + }, > > + { > > + .format = V4L2_PIX_FMT_YVYU, > > + .mdp_color = MDP_COLOR_YVYU, > > + .colorspace = MDP_YCBCR_PROFILE_BT601, > > + .depth = { 16 }, > > + .row_depth = { 16 }, > > + .num_planes = 1, > > + }, > > + { > > + .format = V4L2_PIX_FMT_YVU420, > > + .mdp_color = MDP_COLOR_YV12, > > + .colorspace = MDP_YCBCR_PROFILE_BT601, > > + .depth = { 12 }, > > + .row_depth = { 8 }, > > + .num_planes = 1, > > + }, > > + { > > + .format = V4L2_PIX_FMT_NV12, > > + .mdp_color = MDP_COLOR_NV12, > > + .colorspace = MDP_YCBCR_PROFILE_BT601, > > + .depth = { 12 }, > > + .row_depth = { 8 }, > > + .num_planes = 1, > > + }, > > + { > > + .format = V4L2_PIX_FMT_YUV420M, > > + .mdp_color = MDP_COLOR_I420, > > + .colorspace = V4L2_COLORSPACE_BT2020, > > Is this correct? The other entries above use MDP_YCBCR_PROFILE_ macros, > while this and further entries use V4L2_COLORSPACE_. I will remove colorspace here since it is not coupling with pixel format in DIP. > > > + .depth = { 8, 2, 2 }, > > + .row_depth = { 8, 4, 4 }, > > + .num_planes = 3, > > + }, > > + { > > + .format = V4L2_PIX_FMT_YVU420M, > > + .mdp_color = MDP_COLOR_YV12, > > + .colorspace = V4L2_COLORSPACE_BT2020, > > + .depth = { 8, 2, 2 }, > > + .row_depth = { 8, 4, 4 }, > > + .num_planes = 3, > > + }, > > + { > > + .format = V4L2_PIX_FMT_NV12M, > > + .mdp_color = MDP_COLOR_NV12, > > + .colorspace = V4L2_COLORSPACE_BT2020, > > Why does NV12M have a different colorspace than NV12? I will remove colorspace here since it is not coupling with pixel format in DIP. > > > + .depth = { 8, 4 }, > > + .row_depth = { 8, 8 }, > > + .num_planes = 2, > > + } > > +}; > > + > > +static const struct v4l2_frmsizeenum in_frmsizeenum = { > > + .type = V4L2_FRMSIZE_TYPE_CONTINUOUS, > > + .stepwise.max_width = MTK_DIP_CAPTURE_MAX_WIDTH, > > + .stepwise.min_width = MTK_DIP_CAPTURE_MIN_WIDTH, > > + .stepwise.max_height = MTK_DIP_CAPTURE_MAX_HEIGHT, > > + .stepwise.min_height = MTK_DIP_CAPTURE_MIN_HEIGHT, > > + .stepwise.step_height = 1, > > + .stepwise.step_width = 1, > > +}; > > + > > +static const struct v4l2_frmsizeenum out_frmsizeenum = { > > + .type = V4L2_FRMSIZE_TYPE_CONTINUOUS, > > + .stepwise.max_width = MTK_DIP_OUTPUT_MAX_WIDTH, > > + .stepwise.min_width = MTK_DIP_OUTPUT_MIN_WIDTH, > > + .stepwise.max_height = MTK_DIP_OUTPUT_MAX_HEIGHT, > > + .stepwise.min_height = MTK_DIP_OUTPUT_MIN_HEIGHT, > > + .stepwise.step_height = 1, > > + .stepwise.step_width = 1, > > +}; > > + > > +static const struct mtk_dip_video_device_desc > > +output_queues_setting[MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM] = { > > + { > > + .id = MTK_DIP_VIDEO_NODE_ID_RAW_OUT, > > + .name = "Raw Input", > > + .cap = V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING, > > + .buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE, > > + .smem_alloc = 0, > > + .flags = MEDIA_LNK_FL_ENABLED, > > + .fmts = in_fmts, > > + .num_fmts = ARRAY_SIZE(in_fmts), > > + .default_fmt_idx = 0, > > + .default_width = MTK_DIP_OUTPUT_MAX_WIDTH, > > + .default_height = MTK_DIP_OUTPUT_MAX_HEIGHT, > > + .dma_port = 0, > > + .frmsizeenum = &in_frmsizeenum, > > + .ops = &mtk_dip_v4l2_video_out_ioctl_ops, > > + .description = "Main image source", > > + }, > > + { > > + .id = MTK_DIP_VIDEO_NODE_ID_TUNING_OUT, > > + .name = "Tuning", > > + .cap = V4L2_CAP_META_OUTPUT | V4L2_CAP_STREAMING, > > + .buf_type = V4L2_BUF_TYPE_META_OUTPUT, > > + .smem_alloc = 1, > > + .flags = 0, > > + .fmts = fw_param_fmts, > > + .num_fmts = 1, > > Please still use ARRAY_SIZE() even if the array has just 1 entry. I got it. > > > + .default_fmt_idx = 0, > > + .dma_port = 0, > > + .frmsizeenum = &in_frmsizeenum, > > + .ops = &mtk_dip_v4l2_meta_out_ioctl_ops, > > + .description = "Tuning data", > > + }, > > +}; > > + > > +static const struct mtk_dip_video_device_desc > > +reprocess_output_queues_setting[MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM] = { > > + { > > + .id = MTK_DIP_VIDEO_NODE_ID_RAW_OUT, > > + .name = "Raw Input", > > + .cap = V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING, > > + .buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE, > > + .smem_alloc = 0, > > + .flags = MEDIA_LNK_FL_ENABLED, > > + .fmts = in_fmts, > > + .num_fmts = ARRAY_SIZE(in_fmts), > > + .default_fmt_idx = 5, > > + .default_width = MTK_DIP_OUTPUT_MAX_WIDTH, > > + .default_height = MTK_DIP_OUTPUT_MAX_HEIGHT, > > + .dma_port = 0, > > + .frmsizeenum = &in_frmsizeenum, > > + .ops = &mtk_dip_v4l2_video_out_ioctl_ops, > > + .description = "Source image to be process", > > + > > + }, > > + { > > + .id = MTK_DIP_VIDEO_NODE_ID_TUNING_OUT, > > + .name = "Tuning", > > + .cap = V4L2_CAP_META_OUTPUT | V4L2_CAP_STREAMING, > > + .buf_type = V4L2_BUF_TYPE_META_OUTPUT, > > + .smem_alloc = 1, > > + .flags = 0, > > + .fmts = fw_param_fmts, > > + .num_fmts = 1, > > + .default_fmt_idx = 0, > > + .dma_port = 0, > > + .frmsizeenum = &in_frmsizeenum, > > + .ops = &mtk_dip_v4l2_meta_out_ioctl_ops, > > + .description = "Tuning data for image enhancement", > > + }, > > +}; > > The entries here seem to be almost the same to output_queues_setting[], the > only difference seems to be default_fmt_idx and description. > > What's the difference between the capture and reprocess pipes? The reprocess pipe is completely the same as capture one except the default format of the input. > > > + > > +static const struct mtk_dip_video_device_desc > > +capture_queues_setting[MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM] = { > > + { > > + .id = MTK_DIP_VIDEO_NODE_ID_MDP0_CAPTURE, > > + .name = "MDP0", > > + .cap = V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_STREAMING, > > + .buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, > > + .smem_alloc = 0, > > + .flags = MEDIA_LNK_FL_DYNAMIC | MEDIA_LNK_FL_ENABLED, > > + .fmts = out_fmts, > > + .num_fmts = ARRAY_SIZE(out_fmts), > > + .default_fmt_idx = 1, > > + .default_width = MTK_DIP_CAPTURE_MAX_WIDTH, > > + .default_height = MTK_DIP_CAPTURE_MAX_HEIGHT, > > + .dma_port = 0, > > + .frmsizeenum = &out_frmsizeenum, > > + .ops = &mtk_dip_v4l2_video_cap_ioctl_ops, > > + .description = "Output quality enhanced image", > > + }, > > + { > > + .id = MTK_DIP_VIDEO_NODE_ID_MDP1_CAPTURE, > > + .name = "MDP1", > > + .cap = V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_STREAMING, > > + .buf_type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, > > + .smem_alloc = 0, > > + .flags = MEDIA_LNK_FL_DYNAMIC | MEDIA_LNK_FL_ENABLED, > > + .fmts = out_fmts, > > + .num_fmts = ARRAY_SIZE(out_fmts), > > + .default_fmt_idx = 1, > > + .default_width = MTK_DIP_CAPTURE_MAX_WIDTH, > > + .default_height = MTK_DIP_CAPTURE_MAX_HEIGHT, > > + .dma_port = 0, > > + .frmsizeenum = &out_frmsizeenum, > > + .ops = &mtk_dip_v4l2_video_cap_ioctl_ops, > > + .description = "Output quality enhanced image", > > + > > + }, > > +}; > > + > > +static const struct mtk_dip_pipe_desc > > +pipe_settings[MTK_DIP_PIPE_ID_TOTAL_NUM] = { > > + { > > + .name = MTK_DIP_DEV_DIP_PREVIEW_NAME, > > This string macro is only used here. Please just explicitly put the string > here. Also, as per my other comment, this should probably be just a suffix > that's added to dev_driver_string(). I will use "preview", "capture" and "reprocess" for the .name setting. > > > + .id = MTK_DIP_PIPE_ID_PREVIEW, > > + .master = MTK_DIP_VIDEO_NODE_ID_NO_MASTER, > > + .output_queue_descs = output_queues_setting, > > + .total_output_queues = MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM, > > + .capture_queue_descs = capture_queues_setting, > > + .total_capture_queues = MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM, > > Why do we need this split into output and capture descriptors? They have the > same type. I will merge output and capture descs. > > > + }, > > + { > > + .name = MTK_DIP_DEV_DIP_CAPTURE_NAME, > > Ditto. > > > + .id = MTK_DIP_PIPE_ID_CAPTURE, > > + .master = MTK_DIP_VIDEO_NODE_ID_NO_MASTER, > > + .output_queue_descs = output_queues_setting, > > + .total_output_queues = MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM, > > + .capture_queue_descs = capture_queues_setting, > > + .total_capture_queues = MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM, > > + }, > > + { > > + .name = MTK_DIP_DEV_DIP_REPROCESS_NAME, > > Ditto. > > > + .id = MTK_DIP_PIPE_ID_REPROCESS, > > + .master = MTK_DIP_VIDEO_NODE_ID_NO_MASTER, > > + .output_queue_descs = reprocess_output_queues_setting, > > + .total_output_queues = MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM, > > + .capture_queue_descs = capture_queues_setting, > > + .total_capture_queues = MTK_DIP_VIDEO_NODE_ID_CAPTURE_TOTAL_NUM, > > + }, > > +}; > > + > > +static int mtk_dip_dev_v4l2_init(struct mtk_dip_dev *dip_dev) > > +{ > > + struct media_device *media_dev = &dip_dev->mdev; > > + struct v4l2_device *v4l2_dev = &dip_dev->v4l2_dev; > > + int i; > > + int ret; > > + > > + ret = mtk_dip_dev_media_register(&dip_dev->pdev->dev, > > Do we need to store pdev in dip_dev? Wouldn't storing just dev there > simplify things? I would like to store dev instead. > > > + media_dev, > > + MTK_DIP_DEV_DIP_MEDIA_MODEL_NAME); > > Do we need to pass a constant to this function? Could we just use it > directly from there? > > Also, why not just pass dip_dev instead of the 2 first arguments? I will pass dip_dev and use MTK_DIP_DEV_DIP_MEDIA_MODEL_NAME directly. > > > + if (ret) { > > + dev_err(&dip_dev->pdev->dev, > > + "%s: media device register failed(%d)\n", > > + __func__, ret); > > + return ret; > > + } > > + > > + ret = mtk_dip_dev_v4l2_register(&dip_dev->pdev->dev, > > + media_dev, > > + v4l2_dev); > > + if (ret) { > > + dev_err(&dip_dev->pdev->dev, > > + "%s: v4l2 device register failed(%d)\n", > > + __func__, ret); > > + goto err_release_media_device; > > + } > > + > > + for (i = 0; i < MTK_DIP_PIPE_ID_TOTAL_NUM; i++) { > > + ret = mtk_dip_pipe_init(&dip_dev->dip_pipe[i], dip_dev, > > + &pipe_settings[i], media_dev, v4l2_dev); > > nit: The usual convention is to pass the arguments from the "broadest" > datastructures, e.g. the main driver structure - dip_dev, to the most > specific ones, so dip_dev should be made the first argument. > > There isn't much point in passing media_dev and v4l2_dev here, because we > already have them in dip_dev. I will correct the order and passing dip_dev and dip_pipe only. > > > + if (ret) { > > + dev_err(&dip_dev->pdev->dev, > > + "%s: Pipe id(%d) init failed(%d)\n", > > + dip_dev->dip_pipe[i].desc->name, > > + i, ret); > > + goto err_release_pipe; > > + } > > + } > > + > > + return 0; > > + > > +err_release_pipe: > > + for (i = i - 1; i >= 0; i--) > > nit: The initial decrement could be just written as i--. I got it. > > > + mtk_dip_pipe_release(&dip_dev->dip_pipe[i]); > > + > > + v4l2_device_unregister(v4l2_dev); > > + > > +err_release_media_device: > > + media_device_unregister(media_dev); > > + media_device_cleanup(media_dev); > > Could we move this two into a function called mtk_dip_dev_media_unregister() > to be consistent with the initialization? Yes. I will add mtk_dip_dev_media_unregister(). > > > + > > + return ret; > > +} > > + > > +void mtk_dip_dev_v4l2_release(struct mtk_dip_dev *dip_dev) > > +{ > > + int i; > > + > > + for (i = 0; i < MTK_DIP_PIPE_ID_TOTAL_NUM; i++) > > + mtk_dip_pipe_release(&dip_dev->dip_pipe[i]); > > + > > + v4l2_device_unregister(&dip_dev->v4l2_dev); > > + media_device_unregister(&dip_dev->mdev); > > + media_device_cleanup(&dip_dev->mdev); > > +} > > + > > +static int mtk_dip_probe(struct platform_device *pdev) > > +{ > > + struct mtk_dip_dev *dip_dev; > > + struct mtk_dip_hw *dip_hw; > > + struct device_node *node; > > + struct platform_device *larb_pdev; > > + phandle rproc_phandle; > > + int ret; > > + > > + dip_dev = devm_kzalloc(&pdev->dev, sizeof(*dip_dev), GFP_KERNEL); > > + if (!dip_dev) > > + return -ENOMEM; > > + > > + dip_dev->pdev = pdev; > > + dev_set_drvdata(&pdev->dev, dip_dev); > > + dip_hw = &dip_dev->dip_hw; > > + > > + node = of_parse_phandle(pdev->dev.of_node, "mediatek,larb", 0); > > + if (!node) { > > + dev_err(&pdev->dev, "No mediatek,larb found"); > > + return -EINVAL; > > + } > > + > > + larb_pdev = of_find_device_by_node(node); > > + if (!larb_pdev) { > > + dev_err(&pdev->dev, "No mediatek,larb device found"); > > + return -EINVAL; > > + } > > We shouldn't need this custom larb handling anymore. I got it. I will remove larb_pdev. > > > + > > + dip_hw->clks[0].id = "larb5"; > > + dip_hw->clks[1].id = "dip"; > > + > > + ret = devm_clk_bulk_get(&pdev->dev, MTK_DIP_CLK_NUM, > > Could we use ARRAY_SIZE(clks) instead? I will use ARRAY_SIZE(clks). > > > + dip_hw->clks); > > + if (ret) { > > + dev_err(&pdev->dev, "Failed to get LARB5 and DIP clks:%d\n", > > + ret); > > + return ret; > > + } > > + > > + dip_hw->scp_pdev = scp_get_pdev(dip_dev->pdev); > > + if (!dip_hw->scp_pdev) { > > + dev_err(&dip_dev->pdev->dev, > > + "%s: failed to get scp device\n", > > + __func__); > > + return -EINVAL; > > + } > > + > > + if (of_property_read_u32(dip_dev->pdev->dev.of_node, > > + "mediatek,scp", > > + &rproc_phandle)) { > > + dev_err(&dip_dev->pdev->dev, > > + "%s: could not get scp device\n", > > + __func__); > > + return -EINVAL; > > + } > > + > > + dip_hw->rproc_handle = rproc_get_by_phandle(rproc_phandle); > > + if (!dip_hw->rproc_handle) { > > + dev_err(&dip_dev->pdev->dev, > > + "%s: could not get DIP's rproc_handle\n", > > + __func__); > > + return -EINVAL; > > + } > > + > > + atomic_set(&dip_hw->dip_stream_cnt, 0); > > + atomic_set(&dip_hw->dip_enque_cnt, 0); > > + atomic_set(&dip_hw->num_composing, 0); > > + atomic_set(&dip_hw->num_running, 0); > > + mutex_init(&dip_hw->hw_op_lock); > > + /* Limited by the co-processor side's stack size */ > > + sema_init(&dip_hw->sem, DIP_COMPOSING_MAX_NUM); > > + > > + ret = mtk_dip_hw_working_buf_pool_init(dip_hw); > > + if (ret) { > > + dev_err(&pdev->dev, "working buffer init failed(%d)\n", ret); > > + return ret; > > + } > > + > > + ret = mtk_dip_dev_v4l2_init(dip_dev); > > + if (ret) > > + dev_err(&pdev->dev, "v4l2 init failed(%d)\n", ret); > > Don't we need to clean up the buffer pool initialization if we fail here? Yes, I will clean up the buffer pool initialization here. > > > + > > It's also necessary to initialize autosuspend here by calling > pm_runtime_use_autosuspend() and pm_runtime_set_autosuspend_delay(). > > The delay should be something around 2-3 times the time it takes to suspend > and resume the device. I will add pm_runtime_set_autosuspend_delay() and pm_runtime_use_autosuspend() here. > > > + pm_runtime_enable(&pdev->dev); > > + > > + return ret; > > +} > > + > > +static int mtk_dip_remove(struct platform_device *pdev) > > +{ > > + struct mtk_dip_dev *dip_dev = dev_get_drvdata(&pdev->dev); > > + > > + mtk_dip_hw_working_buf_pool_release(&dip_dev->dip_hw); > > There might be already something running at this point and we would free the > buffers here. Generally the order of remove should be the opposite to the > probe. I will correct the order as the opposite to the probe: pm_runtime_disable(&pdev->dev); mtk_dip_dev_v4l2_release(dip_dev); mtk_dip_hw_working_buf_pool_release(&dip_dev->dip_hw); mutex_destroy(&dip_dev->dip_hw.hw_op_lock); > > > + mtk_dip_dev_v4l2_release(dip_dev); > > + pm_runtime_disable(&pdev->dev); > > + mutex_destroy(&dip_dev->dip_hw.hw_op_lock); > > + > > + return 0; > > +} > > + > > +static int __maybe_unused mtk_dip_pm_suspend(struct device *dev) > > Perhaps mtk_dip_runtime_suspend()? I will rename it as mtk_dip_runtime_suspend(). > > > +{ > > + struct mtk_dip_dev *dip_dev = dev_get_drvdata(dev); > > + > > + clk_bulk_disable_unprepare(MTK_DIP_CLK_NUM, dip_dev->dip_hw.clks); > > + dev_dbg(dev, "%s: disabled dip clks\n", __func__); > > + > > + return 0; > > +} > > + > > +static int __maybe_unused mtk_dip_pm_resume(struct device *dev) > > mtk_dip_runtime_resume()? I will rename it as mtk_dip_runtime_resume(). > > > +{ > > + struct mtk_dip_dev *dip_dev = dev_get_drvdata(dev); > > + int ret = clk_bulk_prepare_enable(MTK_DIP_CLK_NUM, > > + dip_dev->dip_hw.clks); > > + if (ret) { > > + dev_err(dev, "%s: failed to enable dip clks(%d)\n", > > + __func__, ret); > > + return ret; > > + } > > + dev_dbg(dev, "%s: enabled dip clks\n", __func__); > > + > > + ret = rproc_boot(dip_dev->dip_hw.rproc_handle); > > + if (ret) > > + dev_err(dev, "%s: FW load failed(rproc:%p):%d\n", > > + __func__, dip_dev->dip_hw.rproc_handle, ret); > > nit: Please return ret from here and keep the path below only for success. I got it. > > > + else > > + dev_dbg(dev, "%s: FW loaded(rproc:%p)\n", > > + __func__, dip_dev->dip_hw.rproc_handle); > > + > > + return ret; > > +} > > + > > +static int mtk_dip_get_scp_job_num(struct mtk_dip_dev *dip_dev) > > +{ > > + int num; > > + > > + mutex_lock(&dip_dev->dip_hw.hw_op_lock); > > + num = atomic_read(&dip_dev->dip_hw.num_composing); > > + mutex_unlock(&dip_dev->dip_hw.hw_op_lock); > > It's not allowed to use sleeping operations in a wait_event condition, > because the condition could be evaluated while the current process already > enters the UNINTERRUPTIBLE state. > > Given that this is already an atomic_t, there shouldn't be any special > synchronization needed here. Please just use atomic_read() in the > wait_event_timeout() call directly. I got it. > > > + > > + return num; > > +} > > + > > +static int __maybe_unused mtk_dip_suspend(struct device *dev) > > +{ > > + struct mtk_dip_dev *dip_dev = dev_get_drvdata(dev); > > + int ret, num; > > + > > + if (pm_runtime_suspended(dev)) { > > + dev_dbg(dev, "%s: pm_runtime_suspended is true, no action\n", > > + __func__); > > + return 0; > > + } > > + > > + ret = wait_event_timeout(dip_dev->dip_hw.flushing_hw_wq, > > + !(num = mtk_dip_get_scp_job_num(dip_dev)), > > + msecs_to_jiffies(200)); > > Is 200 milliseconds a reasonable timeout here, i.e. for any potential use > case it would always take less than 200 ms to wait for all the tasks running > in the ISP? I would like to adjust the time out value to 1000 / 30 * (DIP_COMPOSING_MAX_NUM) * 3. To wait 3 times of expected frame time (@30fps) in worst case (max number of jobs in SCP). > > > + if (!ret && num) { > > + dev_err(dev, "%s: flushing SCP job timeout, num(%d)\n", > > + __func__, num); > > + > > + return -EBUSY; > > + } > > + > > + return mtk_dip_pm_suspend(dev); > > We should call pm_runtime_force_suspend() instead, so that it also handles > any device dependencies or power domains. I got it. > > > +} > > + > > +static int __maybe_unused mtk_dip_resume(struct device *dev) > > +{ > > + if (pm_runtime_suspended(dev)) { > > + dev_dbg(dev, "%s: pm_runtime_suspended is true, no action\n", > > + __func__); > > + return 0; > > + } > > + > > + return mtk_dip_pm_resume(dev); > > pm_runtime_force_resume() I got it. > > > +} > > + > > +static const struct dev_pm_ops mtk_dip_pm_ops = { > > + SET_SYSTEM_SLEEP_PM_OPS(mtk_dip_suspend, mtk_dip_resume) > > + SET_RUNTIME_PM_OPS(mtk_dip_suspend, mtk_dip_resume, NULL) > > I think you meant mtk_dip_pm_suspend/resume for the runtime PM ops? I will use mtk_dip_runtime_suspend/mtk_dip_runtime_resume for PM ops. > > Best regards, > Tomasz > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH V2 4/6] platform: mtk-isp: Add Mediatek DIP driver 2019-08-27 3:16 ` Frederic Chen @ 2019-08-30 7:14 ` Tomasz Figa 0 siblings, 0 replies; 12+ messages in thread From: Tomasz Figa @ 2019-08-30 7:14 UTC (permalink / raw) To: Frederic Chen Cc: Kurt.Yang-NuS5LvNUpcJWk0Htik3J/w, Shih-Fang.Chuang-NuS5LvNUpcJWk0Htik3J/w, laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw, Rynn Wu (吳育恩), Allan Yang (楊智鈞), suleiman-F7+t8E8rja9g9hUCZPvPmw, Jerry-ch Chen (陳敬憲), Jungo Lin (林明俊), hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w, Hung-Wen Hsieh (謝鴻文), linux-media-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, Holmes Chiou (邱挺), shik-F7+t8E8rja9g9hUCZPvPmw, yuzhao-F7+t8E8rja9g9hUCZPvPmw Hi Frederic, On Tue, Aug 27, 2019 at 12:16 PM Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote: > > Dear Tomasz, > > I appreciate your comment. I will collaborate more closely with Jungo > to solve the common issues in DIP and Pass 1(CAM) drivers. > Thank you! Also thanks for replying to all the comments, it's very helpful. Please check my replies inline. I've snipped out the parts that I don't have further comments on. > > On Wed, 2019-07-31 at 15:10 +0800, Tomasz Figa wrote: > > Hi Frederic, > > > > On Mon, Jul 08, 2019 at 07:04:58PM +0800, frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote: [snip] > > > > > + dev_buf->vbb.vb2_buf.timestamp = > > > + in_buf->vbb.vb2_buf.timestamp; > > > + > > > + vb2_buffer_done(&dev_buf->vbb.vb2_buf, vbf_state); > > > + > > > + node = mtk_dip_vbq_to_node(dev_buf->vbb.vb2_buf.vb2_queue); > > > + spin_lock(&node->buf_list_lock); > > > + list_del(&dev_buf->list); > > > + spin_unlock(&node->buf_list_lock); > > > + > > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > > + "%s:%s: return buf, idx(%d), state(%d)\n", > > > + pipe->desc->name, node->desc->name, > > > + dev_buf->vbb.vb2_buf.index, vbf_state); > > > + } > > > > This looks almost the same as what's being done inside > > mtk_dip_hw_streamoff(). Could we just call this function from the loop > > there? > > I would like to call the function from mtk_dip_hw_streamoff(). The only > difference is mtk_dip_pipe_job_finish() also remove the buffer from the > node's internal list. > Would anything wrong happen if we also remove the buffer from the node's internal list in mtk_dip_hw_streamoff()? Actually, do we need that internal node list? If we have a list of requests and each request stores its buffer, wouldn't that be enough? [snip] > > > > > + > > > + width = ALIGN(width, 4); > > > + stride = DIV_ROUND_UP(width * 3, 2); > > > + stride = DIV_ROUND_UP(stride * pixel_byte, 8); > > > + > > > + if (pix_fmt == V4L2_PIX_FMT_MTISP_F10) > > > + stride = ALIGN(stride, 4); > > > + else > > > + stride = ALIGN(stride, 8); > > > > Could you explain all the calculations done above? > > If the buffer comes from mtk-cam-p1, the stride setting must be the same > as p1. I would like to re-implement the codes following p1's design in > v4 patch as following: > > static u32 > mtk_dip_pass1_cal_pack_stride(u32 width, u32 pix_fmt) { > unsigned int bpl; > unsigned int pixel_bits = > get_pixel_byte_by_fmt(mp->pixelformat); > > /* Bayer encoding format, P1 HW needs 2 bytes alignment */ > bpl = ALIGN(DIV_ROUND_UP(width * pixel_bits, 8), 2); > > /* The setting also needs 4 bytes alignment for DIP HW */ > return ALIGN(bpl, 4);; If we need 4 bytes alignment, wouldn't the bytes per line value end up different from P1 anyway? Perhaps we can just remove the ALIGN(..., 2) above and keep this one? It should be the userspace responsibility anyway to choose a format compatible with both consumer and producer. By the way, double semicolon in the line above. :) > } > > > static __u32 > mtk_dip_pass1_cal_main_stride(u32 width, u32 pix_fmt) > { > unsigned int bpl, ppl; > unsigned int pixel_bits = > get_pixel_byte_by_fmt(mp->pixelformat); > > /* > * The FULL-G encoding format > * 1 G component per pixel > * 1 R component per 4 pixel > * 1 B component per 4 pixel > * Total 4G/1R/1B in 4 pixel (pixel per line:ppl) > */ > ppl = DIV_ROUND_UP(width * 6, 4); > bpl = DIV_ROUND_UP(ppl * pixel_bits, 8); > > /* 4 bytes alignment for 10 bit & others are 8 bytes */ > if (pixel_bits == 10) > bpl = ALIGN(bpl, 4); > else > bpl = ALIGN(bpl, 8); > } Spurious }. > > return bpl; > } > Looks good to me, thanks! > > > > > > + > > > + return stride; > > > +} > > > + > > > +static int is_stride_need_to_align(u32 format, u32 *need_aligned_fmts, > > > + int length) > > > +{ > > > + int i; > > > + > > > + for (i = 0; i < length; i++) { > > > + if (format == need_aligned_fmts[i]) > > > + return true; > > > + } > > > + > > > + return false; > > > +} > > > + > > > +/* Stride that is accepted by MDP HW */ > > > +static u32 dip_mdp_fmt_get_stride(struct v4l2_pix_format_mplane *mfmt, > > > + const struct mtk_dip_dev_format *fmt, > > > + unsigned int plane) > > > +{ > > > + enum mdp_color c = fmt->mdp_color; > > > + u32 bytesperline = (mfmt->width * fmt->row_depth[plane]) / 8; > > > + u32 stride = (bytesperline * MDP_COLOR_BITS_PER_PIXEL(c)) > > > + / fmt->row_depth[0]; > > > + > > > + if (plane == 0) > > > + return stride; > > > + > > > + if (plane < MDP_COLOR_GET_PLANE_COUNT(c)) { > > > + if (MDP_COLOR_IS_BLOCK_MODE(c)) > > > + stride = stride / 2; > > > + return stride; > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +/* Stride that is accepted by MDP HW of format with contiguous planes */ > > > +static u32 > > > +dip_mdp_fmt_get_stride_contig(const struct mtk_dip_dev_format *fmt, > > > + u32 pix_stride, > > > + unsigned int plane) > > > +{ > > > + enum mdp_color c = fmt->mdp_color; > > > + u32 stride = pix_stride; > > > + > > > + if (plane == 0) > > > + return stride; > > > + > > > + if (plane < MDP_COLOR_GET_PLANE_COUNT(c)) { > > > + stride = stride >> MDP_COLOR_GET_H_SUBSAMPLE(c); > > > + if (MDP_COLOR_IS_UV_COPLANE(c) && !MDP_COLOR_IS_BLOCK_MODE(c)) > > > + stride = stride * 2; > > > + return stride; > > > + } > > > + > > > + return 0; > > > +} > > > + > > > +/* Plane size that is accepted by MDP HW */ > > > +static u32 > > > +dip_mdp_fmt_get_plane_size(const struct mtk_dip_dev_format *fmt, > > > + u32 stride, u32 height, > > > + unsigned int plane) > > > +{ > > > + enum mdp_color c = fmt->mdp_color; > > > + u32 bytesperline; > > > + > > > + bytesperline = (stride * fmt->row_depth[0]) > > > + / MDP_COLOR_BITS_PER_PIXEL(c); > > > > Hmm, stride and bytesperline should be exactly the same thing. Could you > > explain what's happening here? > > The stride here is specific for MDP hardware (which uses the same MDP > stride setting for NV12 and NV12M): > > bytesperline = width * row_depth / 8 > MDP stride = width * MDP_COLOR_BITS_PER_PIXEL /8 > > Therfore, > > bytesperline = MDP stride * row_depth / MDP_COLOR_BITS_PER_PIXEL > MDP stride = bytesperline * MDP_COLOR_BITS_PER_PIXEL/ row_depth > I'm sorry I'm still confused. Is there an intermediate buffer between DIP and MDP that has stride of |MDP stride| and then MDP writes to the final buffer that has the stride of |bytesperline|? [snip] > > > > > + u32 sizeimage; > > > + > > > + if (bpl < min_bpl) > > > + bpl = min_bpl; > > > + > > > + sizeimage = (bpl * mfmt_to_fill->height * dev_fmt->depth[i]) > > > + / dev_fmt->row_depth[i]; > > > > Shouldn't this be bpl * fmt->height? > > Row_depth is the bits of the pixel. > Depth means the bytes per pixel of the image format. > > For example, > Image: 640 * 480 > YV12: row_depth = 8, depth = 12 YV12 has 3 planes of 8 bits per pixel. Not sure where does this 12 come from. > Bytes per line = width * row_depth / 8 = 640 * 8/ 8 = 640 > Image size = Bytes per line * height * (depth/ row_depth) > = 640 * 480 * 1.5 > I think we might be having some terminology issue here. "row" is normally the same as "line", which consists of |width| pixels + padding, which is |bytesperline| bytes in total. Perhaps you want to store a bits_per_pixel[] and vertical and horizontal subsampling arrays for all planes of the formats in the format descriptor. By the way, have you considered using the V4L2 format helpers [1]? [1] https://elixir.bootlin.com/linux/v5.3-rc6/source/drivers/media/v4l2-core/v4l2-common.c#L561 > > > > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > > + "Non-contiguous-mp-buf(%s),total-plane-size(%d),dma_port(%d)\n", > > > + buf_name, > > > + total_plane_size, > > > + b->usage); > > > + return 0; > > > + } > > > + > > > + for (; i < MDP_COLOR_GET_PLANE_COUNT(b->format.colorformat); ++i) { > > > > I don't see these MDP_ macros defined anywhere. Please don't use macros > > defined from other drivers. We can embed this information in the > > mtk_dip_dev_format struct. One would normally call it num_cplanes (color > > planes). > > > > However, I would just make this driver support M formats only and forget > > about formats with only memory planes count != color planes count. > > Since the non-M formats are still used by 8183's user lib now, may I add > num_cplanes and support the both formats? > Okay, let's keep them for now. [snip] > > > + > > > + /* Tuning buffer */ > > > + dev_buf_tuning = > > > + pipe_job_info->buf_map[MTK_DIP_VIDEO_NODE_ID_TUNING_OUT]; > > > + if (dev_buf_tuning) { > > > + dev_dbg(&pdev->dev, > > > + "Tuning buf queued: scp_daddr(%pad),isp_daddr(%pad)\n", > > > + &dev_buf_tuning->scp_daddr[0], > > > + &dev_buf_tuning->isp_daddr[0]); > > > + dip_param->tuning_data.pa = > > > + (uint32_t)dev_buf_tuning->scp_daddr[0]; > > > + dip_param->tuning_data.present = true; > > > + dip_param->tuning_data.iova = > > > + (uint32_t)dev_buf_tuning->isp_daddr[0]; > > > > Why are these casts needed? > > This structure is shared between CPU and scp and the pa and iova is > defined as 32bits fields. > > struct tuning_addr { > u32 present; > u32 pa; /* Used by CM4 access */ > u32 iova; /* Used by IOMMU HW access */ > } __attribute__ ((__packed__)); > I see, thanks. [snip] > > > > > +#define DIP_COMPOSING_MAX_NUM 3 > > > +#define DIP_MAX_ERR_COUNT 188U > > > +#define DIP_FLUSHING_WQ_TIMEOUT (16U * DIP_MAX_ERR_COUNT) > > > > Any rationale behind this particular numbers? Please add comments explaining > > them. > > I would like to adjust the time out value to 1000 / 30 * > (DIP_COMPOSING_MAX_NUM) * 3. > > To wait 3 times of expected frame time (@30fps) in the worst case (max > number of jobs in SCP). > With high system load it could be still possible to hit this. Since it should normally be impossible to hit this timeout on a system working correctly, how about just making this something really long like 1 second? [snip] > > > > > + > > > + dev_dbg(&dip_dev->pdev->dev, > > > + "%s: wakeup frame_no(%d),num(%d)\n", > > > + __func__, req->img_fparam.frameparam.frame_no, > > > + atomic_read(&dip_hw->num_composing)); > > > + > > > + buf = req->working_buf; > > > + mtk_dip_wbuf_to_ipi_img_addr(&req->img_fparam.frameparam.subfrm_data, > > > + &buf->buffer); > > > + memset(buf->buffer.vaddr, 0, DIP_SUB_FRM_SZ); > > > + mtk_dip_wbuf_to_ipi_img_sw_addr(&req->img_fparam.frameparam.config_data, > > > + &buf->config_data); > > > + memset(buf->config_data.vaddr, 0, DIP_COMP_SZ); > > > + > > > + if (!req->img_fparam.frameparam.tuning_data.present) { > > > + /* > > > + * When user enqueued without tuning buffer, > > > + * it would use driver internal buffer. > > > + */ > > > + dev_dbg(&dip_dev->pdev->dev, > > > + "%s: frame_no(%d) has no tuning_data\n", > > > + __func__, req->img_fparam.frameparam.frame_no); > > > + > > > + mtk_dip_wbuf_to_ipi_tuning_addr > > > + (&req->img_fparam.frameparam.tuning_data, > > > + &buf->tuning_buf); > > > + memset(buf->tuning_buf.vaddr, 0, DIP_TUNING_SZ); > > > + } > > > + > > > + req->img_fparam.frameparam.state = FRAME_STATE_COMPOSING; > > > + mtk_dip_wbuf_to_ipi_img_sw_addr(&req->img_fparam.frameparam.self_data, > > > + &buf->frameparam); > > > + memcpy(buf->frameparam.vaddr, &req->img_fparam.frameparam, > > > + sizeof(req->img_fparam.frameparam)); > > > > Is img_fparam really used at this stage? I can only see ipi_param passed to > > the IPI. > > The content of img_fparam is passed to SCP. > > The dip frame information is saved in req->img_fparam.frameparam (in > mtk_dip_pipe_ipi_params_config()). > > The content of req->img_fparam.frameparam is copied to > buf->frameparam.vaddr. > > Since we set ipi_param.frm_param.pa to the buf->frameparam.scp_daddr in > mtk_dip_wbuf_to_ipi_img_sw_addr(), the content of img_fparam is pass to > SCP through ipi_param. Okay, I see. Thanks, [snip] > > > > > + } else { > > > + for (i = 0; i < *num_planes; i++) { > > > + if (sizes[i] < fmt->fmt.pix_mp.plane_fmt[i].sizeimage) { > > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > > + "%s:%s:%s: invalid buf: %u < %u\n", > > > + __func__, pipe->desc->name, > > > + node->desc->name, sizes[0], size); > > > + return -EINVAL; > > > + } > > > + sizes[i] = fmt->fmt.pix_mp.plane_fmt[i].sizeimage; > > > > For VIDIOC_CREATEBUFS we also need to handle the case when *num_planes > 0 > > and then we need to honor the values already present in sizes[]. (Note that > > the code above overrides *num_planes to 1, so we lose the information. The > > code needs to be restructured to handle that.) > > We overrides *num_planes when *num_planes is 0. Is the modification I > need to do to keep the original value of size[]? Yes. > > if (!*num_planes) { > *num_planes = 1; > sizes[0] = fmt->fmt.pix_mp.plane_fmt[0].sizeimage; > } > [snip] > > > > > + dev_dbg(&pipe->dip_dev->pdev->dev, > > > + "%s:%s:%s cnt_nodes_not_streaming(%d), is_pipe_streamon(%d)\n", > > > + __func__, pipe->desc->name, node->desc->name, count, > > > + is_pipe_streamon); > > > + > > > + if (count && is_pipe_streamon) { > > > > For v4l2_subdev_call() shouldn't this be !count && is_pipe_streamon? > > Do you mean that pipe->subdev's stop stream should be called after all > video device are stream off, not the first video device's stream off? > Partially. See the comment below. We should stop the subdev when the first video node stops streaming, but the media pipeline only when all the nodes stopped. > > > > > + ret = v4l2_subdev_call(&pipe->subdev, video, s_stream, 0); > > > + if (ret) > > > + dev_err(&pipe->dip_dev->pdev->dev, > > > + "%s:%s: sub dev s_stream(0) failed(%d)\n", > > > + pipe->desc->name, node->desc->name, ret); > > > + media_pipeline_stop(&node->vdev.entity); > > > > We should do this one when the last node stops streaming to solve the > > enable state locking issue as described in my comment to _start_streaming(). > > I will do this when the last node stops streaming. > Ack. > > > > > + } > > > + > > > + mtk_dip_return_all_buffers(pipe, node, VB2_BUF_STATE_ERROR); > > > +} > > > + > > > +static int mtk_dip_videoc_querycap(struct file *file, void *fh, > > > + struct v4l2_capability *cap) > > > +{ > > > + struct mtk_dip_pipe *pipe = video_drvdata(file); > > > + > > > + strlcpy(cap->driver, pipe->desc->name, > > > + sizeof(cap->driver)); > > > + strlcpy(cap->card, pipe->desc->name, > > > + sizeof(cap->card)); > > > + snprintf(cap->bus_info, sizeof(cap->bus_info), > > > + "platform:%s", dev_name(pipe->dip_dev->mdev.dev)); > > > + > > > + return 0; > > > +} > > > + > > > +static int mtk_dip_videoc_try_fmt(struct file *file, void *fh, > > > + struct v4l2_format *f) > > > > I don't see this function returning any error codes. Please make it void. > > mtk_dip_videoc_try_fmt() is used as vidioc_try_fmt_vid_out_mplane op. > Using void seems to make it incompatible with > vidioc_try_fmt_vid_out_mplane. > > .vidioc_try_fmt_vid_out_mplane = mtk_dip_videoc_try_fmt, > > int (*vidioc_try_fmt_vid_out_mplane)(struct file *file, void *fh, > struct v4l2_format *f); > Oops, sorry, I'm not sure why I suggested that. [snip] > > > + /* Initialize subdev */ > > > + v4l2_subdev_init(&pipe->subdev, &mtk_dip_subdev_ops); > > > + > > > + pipe->subdev.entity.function = > > > + MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER; > > > + pipe->subdev.entity.ops = &mtk_dip_media_ops; > > > + pipe->subdev.flags = > > > + V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; > > > + pipe->subdev.ctrl_handler = NULL; > > > + pipe->subdev.internal_ops = &mtk_dip_subdev_internal_ops; > > > + > > > + for (i = 0; i < pipe->num_nodes; i++) > > > + pipe->subdev_pads[i].flags = > > > + V4L2_TYPE_IS_OUTPUT(pipe->nodes[i].desc->buf_type) ? > > > + MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE; > > > > Isn't this the other way around? > > I checked the document of MEDIA_PAD_FL_SINK and MEDIA_PAD_FL_SOURCE. It > seems that the codes match the description. > > RAW Ouput video device: MEDIA_PAD_FL_SOURCE --> DIP sub dev: > MEDIA_PAD_FL_SINK > DIP sub dev: MEDIA_PAD_FL_SOURCE --> MDP Capture video device: > MEDIA_PAD_FL_SINK > > MEDIA_PAD_FL_SINK: Input pad, relative to the entity. Input pads sink > data and are targets of links. > MEDIA_PAD_FL_SOURCE: Output pad, relative to the entity. Output pads > source data and are origins of links. > Ah, that's right, sorry for the noise. [snip] > > > + { > > > + .format = V4L2_PIX_FMT_NV12M, > > > + .mdp_color = MDP_COLOR_NV12, > > > + .colorspace = V4L2_COLORSPACE_BT2020, > > > + .depth = { 8, 4 }, > > > + .row_depth = { 8, 8 }, > > > > What is depth and what is row_depth? They both seem to not match NV12, which > > should have 16 bits per sample in the CbCr plane. > > Fow_depth is the bits of the pixel. Bits of a YCbCr plane pixel is 16 for NV12. > Depth means the bytes per pixel of the image foramt. > > For example, > Image: 640 * 480 > YV12: row_depth = 8, depth = 12 > Bytes per line = width * row_depth / 8 = 640 * 8/ 8 = 640 > Image size = Bytes per line * height * (depth/ row_depth) > = 640 * 480 * 1.5 > > Image: 640 * 480 > Bytes per line(Y) = width * row_depth/ 8 = 640 > Bytes per line(CbCr) = width * row_depth/ 8 = 640 > > Image size(Y) = Bytes per line * height * (depth/ row_depth) > = 640 * 480 * 8/8 = 640 * 480 * 1 > > Image size(CbCr) = Bytes per line * height * (depth/ row_depth) > = 640 * 480 * 4/8 = 640 * 480 * 0.5 > I'd suggest either using the V4L2 format helpers, as suggested in another comment above with a link OR adopting the typical convention of having the .depth mean the pixel value size, i.e. 16-bit for CbCr plane of NV12 and then use subsampling factors to calculate the plane bytesperline and sizeimage. [snip] > > > +static const struct mtk_dip_video_device_desc > > > +reprocess_output_queues_setting[MTK_DIP_VIDEO_NODE_ID_OUT_TOTAL_NUM] = { > > > + { > > > + .id = MTK_DIP_VIDEO_NODE_ID_RAW_OUT, > > > + .name = "Raw Input", > > > + .cap = V4L2_CAP_VIDEO_OUTPUT_MPLANE | V4L2_CAP_STREAMING, > > > + .buf_type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE, > > > + .smem_alloc = 0, > > > + .flags = MEDIA_LNK_FL_ENABLED, > > > + .fmts = in_fmts, > > > + .num_fmts = ARRAY_SIZE(in_fmts), > > > + .default_fmt_idx = 5, > > > + .default_width = MTK_DIP_OUTPUT_MAX_WIDTH, > > > + .default_height = MTK_DIP_OUTPUT_MAX_HEIGHT, > > > + .dma_port = 0, > > > + .frmsizeenum = &in_frmsizeenum, > > > + .ops = &mtk_dip_v4l2_video_out_ioctl_ops, > > > + .description = "Source image to be process", > > > + > > > + }, > > > + { > > > + .id = MTK_DIP_VIDEO_NODE_ID_TUNING_OUT, > > > + .name = "Tuning", > > > + .cap = V4L2_CAP_META_OUTPUT | V4L2_CAP_STREAMING, > > > + .buf_type = V4L2_BUF_TYPE_META_OUTPUT, > > > + .smem_alloc = 1, > > > + .flags = 0, > > > + .fmts = fw_param_fmts, > > > + .num_fmts = 1, > > > + .default_fmt_idx = 0, > > > + .dma_port = 0, > > > + .frmsizeenum = &in_frmsizeenum, > > > + .ops = &mtk_dip_v4l2_meta_out_ioctl_ops, > > > + .description = "Tuning data for image enhancement", > > > + }, > > > +}; > > > > The entries here seem to be almost the same to output_queues_setting[], the > > only difference seems to be default_fmt_idx and description. > > > > What's the difference between the capture and reprocess pipes? > > The reprocess pipe is completely the same as capture one except the > default format of the input. > Does the default format really matter here? The userspace should set its own desired format anyway. Then we could just unify the settings of both pipes. [snip] > > > > > + > > > + return num; > > > +} > > > + > > > +static int __maybe_unused mtk_dip_suspend(struct device *dev) > > > +{ > > > + struct mtk_dip_dev *dip_dev = dev_get_drvdata(dev); > > > + int ret, num; > > > + > > > + if (pm_runtime_suspended(dev)) { > > > + dev_dbg(dev, "%s: pm_runtime_suspended is true, no action\n", > > > + __func__); > > > + return 0; > > > + } > > > + > > > + ret = wait_event_timeout(dip_dev->dip_hw.flushing_hw_wq, > > > + !(num = mtk_dip_get_scp_job_num(dip_dev)), > > > + msecs_to_jiffies(200)); > > > > Is 200 milliseconds a reasonable timeout here, i.e. for any potential use > > case it would always take less than 200 ms to wait for all the tasks running > > in the ISP? > > I would like to adjust the time out value to 1000 / 30 * > (DIP_COMPOSING_MAX_NUM) * 3. > > To wait 3 times of expected frame time (@30fps) in worst case (max > number of jobs in SCP). > As I suggested in another comment above, the worst case for the hardware might be still better than the scheduling latency we could get for a heavy loaded system. While that wouldn't really apply here, because nothing else happening in parallel when the system is suspending, we could just stick to some really long time out anyway, e.g. 1 second. We shouldn't hit it anyway - it's just a safety guard to prevent the system hanging if something goes really bad. Best regards, Tomasz ^ permalink raw reply [flat|nested] 12+ messages in thread
* [RFC PATCH V2 5/6] remoteproc/mediatek: add SCP's shared dma pool support for mt8183 [not found] ` <20190708110500.7242-1-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> ` (3 preceding siblings ...) 2019-07-08 11:04 ` [RFC PATCH V2 4/6] platform: mtk-isp: Add Mediatek DIP driver frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-08 11:04 ` frederic.chen-NuS5LvNUpcJWk0Htik3J/w 2019-07-08 11:05 ` [RFC PATCH V2 6/6] media: platform: mtk-mdp3: Add struct tuning_addr to identify user tuning data frederic.chen-NuS5LvNUpcJWk0Htik3J/w 2019-07-28 5:00 ` [RFC PATCH V2 0/6] media: platform: Add support for Digital Image Processing (DIP) on mt8183 SoC Tomasz Figa 6 siblings, 0 replies; 12+ messages in thread From: frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-08 11:04 UTC (permalink / raw) To: hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w, laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw, tfiga-F7+t8E8rja9g9hUCZPvPmw, matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mchehab-DgEjT+Ai2ygdnm+yROfE0A Cc: shik-F7+t8E8rja9g9hUCZPvPmw, devicetree-u79uwXL29TY76Z2rM5mHXA, Sean.Cheng-NuS5LvNUpcJWk0Htik3J/w, Rynn.Wu-NuS5LvNUpcJWk0Htik3J/w, Allan.Yang-NuS5LvNUpcJWk0Htik3J/w, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, holmes.chiou-NuS5LvNUpcJWk0Htik3J/w, suleiman-F7+t8E8rja9g9hUCZPvPmw, Jerry-ch.Chen-NuS5LvNUpcJWk0Htik3J/w, jungo.lin-NuS5LvNUpcJWk0Htik3J/w, sj.huang-NuS5LvNUpcJWk0Htik3J/w, yuzhao-F7+t8E8rja9g9hUCZPvPmw, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, zwisler-F7+t8E8rja9g9hUCZPvPmw, christie.yu-NuS5LvNUpcJWk0Htik3J/w, frederic.chen-NuS5LvNUpcJWk0Htik3J/w, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-media-u79uwXL29TY76Z2rM5mHXA From: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> This patch uses of_reserved_mem_device_init_by_idx() to hook the scp device to DMA mapping API to provide a shared dma pool of SCP DMA buffers for SCP's client such as DIP and ISP Pass 1 drivers. Signed-off-by: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- drivers/remoteproc/mtk_scp.c | 54 ++++++++++++++++++++++-------------- 1 file changed, 33 insertions(+), 21 deletions(-) diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c index 4c093dec52b9..0cffe4b63dba 100644 --- a/drivers/remoteproc/mtk_scp.c +++ b/drivers/remoteproc/mtk_scp.c @@ -4,12 +4,14 @@ #include <asm/barrier.h> #include <linux/clk.h> +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/of_reserved_mem.h> #include <linux/platform_data/mtk_scp.h> #include <linux/platform_device.h> #include <linux/remoteproc.h> @@ -487,29 +489,29 @@ EXPORT_SYMBOL_GPL(scp_get_reserve_mem_size); static int scp_map_memory_region(struct mtk_scp *scp) { - struct device_node *node; - struct resource r; - int ret; + int ret, id; - node = of_parse_phandle(scp->dev->of_node, "memory-region", 0); - if (!node) { - dev_err(scp->dev, "no memory-region specified\n"); - return -EINVAL; + ret = of_reserved_mem_device_init_by_idx(scp->dev, scp->dev->of_node, + 0); + if (ret) { + dev_err(scp->dev, + "%s:of_reserved_mem_device_init_by_idx(0) failed:(%d)", + __func__, ret); + return -ENOMEM; } - ret = of_address_to_resource(node, 0, &r); - if (ret) - return ret; + /* Pre-allocate the working buffers */ + scp->dram_size = MAX_CODE_SIZE; + for (id = 0; id < SCP_NUMS_MEM_ID; id++) + scp->dram_size += scp_reserve_mblock[id].size; - scp->phys_addr = r.start; - scp->dram_size = resource_size(&r); - scp->cpu_addr = - devm_ioremap_wc(scp->dev, scp->phys_addr, scp->dram_size); + scp->cpu_addr = dma_alloc_coherent(scp->dev, scp->dram_size, + &scp->phys_addr, GFP_KERNEL); if (!scp->cpu_addr) { - dev_err(scp->dev, "unable to map memory region: %pa+%zx\n", - &r.start, scp->dram_size); - return -EBUSY; + dev_err(scp->dev, "unable to pre-allocate memory for SCP: %zx\n", + scp->dram_size); + return -ENOMEM; } #if SCP_RESERVED_MEM @@ -519,6 +521,13 @@ static int scp_map_memory_region(struct mtk_scp *scp) return 0; } +static void scp_unmap_memory_region(struct mtk_scp *scp) +{ + dma_free_coherent(scp->dev, scp->dram_size, scp->cpu_addr, + scp->phys_addr); + of_reserved_mem_device_release(scp->dev); +} + static struct mtk_rpmsg_info mtk_scp_rpmsg_info = { .send_ipi = scp_ipi_send, .register_ipi = scp_ipi_register, @@ -594,20 +603,20 @@ static int scp_probe(struct platform_device *pdev) if (IS_ERR(scp->clk)) { dev_err(dev, "Failed to get clock\n"); ret = PTR_ERR(scp->clk); - goto free_rproc; + goto release_dev_mem; } ret = clk_prepare_enable(scp->clk); if (ret) { dev_err(dev, "failed to enable clocks\n"); - goto free_rproc; + goto release_dev_mem; } ret = scp_ipi_init(scp); clk_disable_unprepare(scp->clk); if (ret) { dev_err(dev, "Failed to init ipi\n"); - goto free_rproc; + goto release_dev_mem; } /* register SCP initialization IPI */ @@ -617,7 +626,7 @@ static int scp_probe(struct platform_device *pdev) scp); if (ret) { dev_err(dev, "Failed to register IPI_SCP_INIT\n"); - goto free_rproc; + goto release_dev_mem; } mutex_init(&scp->lock); @@ -645,6 +654,8 @@ static int scp_probe(struct platform_device *pdev) remove_subdev: scp_remove_rpmsg_subdev(scp); mutex_destroy(&scp->lock); +release_dev_mem: + scp_unmap_memory_region(scp); free_rproc: rproc_free(rproc); @@ -658,6 +669,7 @@ static int scp_remove(struct platform_device *pdev) scp_remove_rpmsg_subdev(scp); rproc_del(scp->rproc); rproc_free(scp->rproc); + scp_unmap_memory_region(scp); return 0; } -- 2.18.0 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RFC PATCH V2 6/6] media: platform: mtk-mdp3: Add struct tuning_addr to identify user tuning data [not found] ` <20190708110500.7242-1-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> ` (4 preceding siblings ...) 2019-07-08 11:04 ` [RFC PATCH V2 5/6] remoteproc/mediatek: add SCP's shared dma pool support for mt8183 frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-08 11:05 ` frederic.chen-NuS5LvNUpcJWk0Htik3J/w 2019-07-28 5:00 ` [RFC PATCH V2 0/6] media: platform: Add support for Digital Image Processing (DIP) on mt8183 SoC Tomasz Figa 6 siblings, 0 replies; 12+ messages in thread From: frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-08 11:05 UTC (permalink / raw) To: hans.verkuil-FYB4Gu1CFyUAvxtiuMwx3w, laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw, tfiga-F7+t8E8rja9g9hUCZPvPmw, matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w, mchehab-DgEjT+Ai2ygdnm+yROfE0A Cc: shik-F7+t8E8rja9g9hUCZPvPmw, devicetree-u79uwXL29TY76Z2rM5mHXA, Sean.Cheng-NuS5LvNUpcJWk0Htik3J/w, Rynn.Wu-NuS5LvNUpcJWk0Htik3J/w, Allan.Yang-NuS5LvNUpcJWk0Htik3J/w, srv_heupstream-NuS5LvNUpcJWk0Htik3J/w, holmes.chiou-NuS5LvNUpcJWk0Htik3J/w, suleiman-F7+t8E8rja9g9hUCZPvPmw, Jerry-ch.Chen-NuS5LvNUpcJWk0Htik3J/w, jungo.lin-NuS5LvNUpcJWk0Htik3J/w, sj.huang-NuS5LvNUpcJWk0Htik3J/w, yuzhao-F7+t8E8rja9g9hUCZPvPmw, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, zwisler-F7+t8E8rja9g9hUCZPvPmw, christie.yu-NuS5LvNUpcJWk0Htik3J/w, frederic.chen-NuS5LvNUpcJWk0Htik3J/w, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-media-u79uwXL29TY76Z2rM5mHXA From: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> We added a struct tuning_addr which contains a field "present" so that the driver can tell the firmware if we have user tuning dataor not. Signed-off-by: Frederic Chen <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- drivers/media/platform/mtk-mdp3/mtk-img-ipi.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/media/platform/mtk-mdp3/mtk-img-ipi.h b/drivers/media/platform/mtk-mdp3/mtk-img-ipi.h index 9fabe7e8b71d..0944fe911d97 100644 --- a/drivers/media/platform/mtk-mdp3/mtk-img-ipi.h +++ b/drivers/media/platform/mtk-mdp3/mtk-img-ipi.h @@ -38,6 +38,12 @@ struct img_addr { u32 iova; /* Used by IOMMU HW access */ } __attribute__ ((__packed__)); +struct tuning_addr { + u32 present; + u32 pa; /* Used by CM4 access */ + u32 iova; /* Used by IOMMU HW access */ +} __attribute__ ((__packed__)); + struct img_sw_addr { u64 va; /* Used by APMCU access */ u32 pa; /* Used by CM4 access */ @@ -105,7 +111,7 @@ struct img_ipi_frameparam { u64 drv_data; struct img_input inputs[IMG_MAX_HW_INPUTS]; struct img_output outputs[IMG_MAX_HW_OUTPUTS]; - struct img_addr tuning_data; + struct tuning_addr tuning_data; struct img_addr subfrm_data; struct img_sw_addr config_data; struct img_sw_addr self_data; -- 2.18.0 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [RFC PATCH V2 0/6] media: platform: Add support for Digital Image Processing (DIP) on mt8183 SoC [not found] ` <20190708110500.7242-1-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> ` (5 preceding siblings ...) 2019-07-08 11:05 ` [RFC PATCH V2 6/6] media: platform: mtk-mdp3: Add struct tuning_addr to identify user tuning data frederic.chen-NuS5LvNUpcJWk0Htik3J/w @ 2019-07-28 5:00 ` Tomasz Figa 6 siblings, 0 replies; 12+ messages in thread From: Tomasz Figa @ 2019-07-28 5:00 UTC (permalink / raw) To: Hans Verkuil Cc: Shik Chen, devicetree-u79uwXL29TY76Z2rM5mHXA, Sean Cheng (鄭昇弘), Frederic Chen, Rynn Wu (吳育恩), Allan.Yang-NuS5LvNUpcJWk0Htik3J/w, srv_heupstream, Holmes Chiou (邱挺), Suleiman Souhlal, Jerry-ch Chen, Yu Zhao, Jungo Lin (林明俊), Sj Huang, Laurent Pinchart, moderated list:ARM/Mediatek SoC support, Ross Zwisler, Matthias Brugger, Christie Yu (游雅惠) Hi Hans, On Mon, Jul 8, 2019 at 8:05 PM <frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> wrote: > > Hello, > > This RFC patch series added Digital Image Processing (DIP) driver on Mediatek > mt8183 SoC. It belongs to the Mediatek's ISP driver series based on V4L2 and > media controller framework. I posted the main part of the DIP driver as RFC to > discuss first and would like some review comments. > > I appreciate the helpful comment of Tomasz, Rob and Shik in RFC V1. The RFC V2 > patch addressed on the review issues in V1. There are 2 V4L2 compliance test > issues still under discussion and I will do the corresponding modification in > the next patch after we come to the conclusion. > > 1. Request API test doesn't know which buffers of the video devices are > required so we got failed in testRequests() > Perhaps the test should check the media topology and infer the video devices required from there? > 2. V4L2 compliance test check if the driver return error when passing an > invalid image size, but in vb2_create_bufs() case, we don't know if the > size check is required or not. In current VB2 API, we don't get the format given to CREATE_BUFS anymore, we just get the requested sizeimage. How do we validate if the sizeimage is big enough for the format? Should we implement that check in the .vidioc_create_bufs op before calling vb2_create_bufs()? > > Please see the following URL for the detail. > http://lists.infradead.org/pipermail/linux-mediatek/2019-June/020884.html > Would you be able to help us with the above 2 issues? They are worked around in the driver, so the tests pass below, but we don't want such workarounds in driver code. Best regards, Tomasz > ============== > Introduction > ============== > > Digital Image Processing (DIP) unit can accept the tuning parameters and > adjust the image content in Mediatek ISP system. Furthermore, it performs > demosaicing and noise reduction on the image to support the advanced camera > features of the application. The DIP driver also support image format > conversion, resizing and rotation with its hardware path. > > The driver is implemented with V4L2 and media controller framework. We > have the following entities describing the DIP path. Since a DIP frame has > multiple buffers, the driver uses Request API to control the multiple > buffer's enqueue flow. > > 1. Meta (output video device): connects to DIP sub device. It accepts the > input tuning buffer from userspace. The metadata interface used currently > is only a temporary solution to kick off driver development and is not > ready for reviewed yet. > > 2. RAW (output video device): connects to DIP sub device. It accepts input > image buffer from userspace. > > 3. DIP (sub device): connects to MDP-0 and MDP-1. When processing an image, > DIP hardware support multiple output images with different size and format > so it needs two capture video devices to return the streaming data to the > user. > > 4. MDP-0 (capture video device): return the processed image data. > > 5. MDP-1 (capture video device): return the processed image data, the > image size and format can be different from the ones of MDP-0. > > The overall file structure of the DIP driver is as following: > > * mtk_dip-v4l2.c: implements DIP platform driver, V4L2 and vb2 operations. > > * mtk_dip-sys.c: implements the hardware job handling flow including the part of > interaction with the SCP and MDP. > > * mtk_dip-dev.c: implements dip pipe utilities. DIP driver supports 3 software > pipes (preview, capture and reprocessing) at the same time. All > the pipes share the same DIP hardware to process the images. > > ================== > Changes in v2 > ================== > * mtk_dip-smem.c > 1. Removed mtk_dip-smem.c and the custom code of SCP and DIP's share memory > operation, and uses SCP device as the allocation device instead. (SCP creates > the shared DMA pool of DMA buffers and can hook to DMA mapping APIs) > > * mtk_dip-ctrl.c > 1. Merged mtk_dip-ctrl.c into mtk_dip-v4l2.c since we only have a HW ctrl. > (V4L2_CID_ROTATE) > > * mtk_dip-sys.c: > 1. Removed struct mtk_dip_hw_work, mtk_dip_hw_submit_work and the related memory > management flow (use mtk_dip_request instead) > > 2. Uses workqueue mdp_wq instead of dip_runner_thread kthread to simplify the > design > > 3. Removed dip_gcejoblist and use mtk_dip_job_info list instead > > 4. Removed framejob and mtk_dip_hw_mdpcb_work and the related alloc and free > since it already embedded in the new struct mtk_dip_request > > 5. Integrated struct mtk_dip_hw_user_id and struct with mtk_dip_pipe, and > removed dip_hw->dip_useridlist > > 6. Pass mtk_dip_request to mdp_cmdq_sendtask() as cb data > > 7. Use spinlock instead of mutex as struct mtk_dip_hw_queue's queuelock so that > we can use direct function call instead of mdpcb_workqueue works > > 8. Removed dip_send() and use scp_ipi_send() directly > > 9. Removed composing_wq and the related macro, we use semaphore instead > > 10. Use array to keep constant number of working buffer pointers in dip_hw > instead a list > > 11. Allocates the SCP working buffer before scheduling the job into SCP. When > there is no free buffer, we hold the job until there are any working buffers > available. > > 12. Re-designed the request handling flow. We implement > mtk_dip_vb2_request_validate() to collect the job data including buffers and > check if we got minimum required buffers. mtk_dip_pipe_try_enqueue() is added to > simplify the job scheduling flow in both streamon() case with buffers already in > queues and .buf_queue() during streaming. In streamon() function, we call > mtk_dip_pipe_try_enqueue() to execute as many as jobs in the pending list > > 13. Fixed the issue about passing the kernel pointer to SCP > > 14. Re-designed mtk_dip_hw_flush_by_id() to remove the unnecessary loop and > interrupt abort > > 15. Added codes to wait for pending jobs already in SCP during suspend flow. In > mtk_dip_suspend() and dip_submit_worker(), we get mutex hw_op_lock before read > and update the SCP job number to avoid the race condition when system suspend > happens and DIP driver is sending ipi command to trigger the firmware job. > > 16. Removed struct mtk_dip_hw's dip_user_cnt and dip_state, and uses > dip_stream_cnt instead > > 17. Uses dma_alloc_coherent() instead of scp_get_reserve_mem_phys()/ > scp_get_reserve_mem_size() to allocate DIP working buffers > > * mtk_dip-v4l2.c: > 1. Call mtk_dip_hw_stream{on, off} in mtk_dip_subdev_s_stream() directly instead > mtk_dip_pipe_stream_on and mtk_dip_pipe_stream_off > > 2. Removed buf usage HW ctrl and uses dma port configured in node's description > instead > > 3. Moved platform driver ops to mtk_dip-v4l2.c (which includes the V4L2/media > ops implementation) > > 4. Moved hardware related operation in sub-device open/close to > streamon()/streamoff() ops > > 5. Uses dip_pipe->lock to synchronize streamon, streamoff and link setup flow > > 6. Added a counter dip_pipe->cnt_nodes_not_streaming to check if the pipe can be > streamon or not (instead of the mtk_dip_all_nodes_streaming()) > > 7. Moved the buffer size checking code from .queue_setup() to .buf_prepare() > > 8. Added multiple-plane formats support > > 9. Created interfaces and interface links for input and output video nodes > > 10. Added error handling and improved the cleanup codes in > mtk_dip_dev_v4l2_init() and mtk_dip_pipe_v4l2_register() > > 11. Added mtk_dip_video_device_v4l2_register() to simplify > mtk_dip_pipe_v4l2_register()'s implementation > > 12. Added mtk_dip_video_device.flags instead of enable, dynamic and immutable > fields in struct mtk_dip_video_device. > > 13. Added a list to mtk_dip_video_device to hold queued buffers instead of > accessing vbq.bufs directly. > > 14. Merged struct mtk_dip_dev_meta_format and struct mtk_dip_dev_mdp_format into > struct mtk_dip_dev_format > > 15. Changed the try_fmt() implementation. If the pixelformat is not supported, > we use the default one but keep the valid fields. > > 16. Moved the mtk_dip_hw_connect()/mtk_dip_hw_disconnect() call from > mtk_dip_subdev_s_stream() to mtk_dip_hw_streamon()/mtk_dip_hw_streamoff() and > removed some redundant check about stream count. > > 17. Re-implemented dev_pm_ops > > * mtk_dip-dev.c: > 1. Added mtk_dip_request extending media_request and embedded pipe_job_info in > it. > > 2. Removed mtk_dip_pipe_stream{on, off} and move the content to > mtk_dip_hw_stream{on, off} > > 3. Removed fill_ipi_img_param() and extends fill_ipi_img_param_mp() so that it > can support both multiple non-contiguous and multiple contiguous planes buffers. > > 4. Added mtk_dip_pipe_get_stride() to reduce redundant codes. > > 5. Removed call_mtk_dip_pipe_finish() and merged its content into its callers > > 6. Removed unused ctrl handler from struct mtk_dip_pipe. > > ================== > Changes in v1 > ================== > 1. Uses Request API instead of DIP's buffer collection design > > 2. Removed unnecessary abstraction structurally, including mtk_dip_ctx and > related ops > > 3. Removed the dip_smem node from device tree > > 4. Improved the dip_work list's management flow > > 5. Fixed the common issues Tomasz commented on Mediatek ISP Pass 1's RFC v0 > patch series > > ================== > Dependent patch > ================== > > DIP driver depends on MDP 3 driver and SCP driver. The patches are as > following: > > [1]. support mdp3 on mt8183 platform > https://patchwork.kernel.org/cover/10945585/ > > [2]. Add support for mt8183 SCP > https://patchwork.kernel.org/cover/11027245/ > > ================== > Compliance test > ================== > > * Test command: v4l2-compliance -m /dev/media0 > * test output: > > v4l2-compliance SHA: not available, 32 bits > > Compliance test for camera-dip device /dev/media0: > > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > > Required ioctls: > test MEDIA_IOC_DEVICE_INFO: OK > > Allow for multiple opens: > test second /dev/media0 open: OK > test MEDIA_IOC_DEVICE_INFO: OK > test for unlimited opens: OK > > Media Controller ioctls: > test MEDIA_IOC_G_TOPOLOGY: OK > Entities: 15 Interfaces: 27 Pads: 24 Links: 39 > test MEDIA_IOC_ENUM_ENTITIES/LINKS: OK > test MEDIA_IOC_SETUP_LINK: OK > > Total for camera-dip device /dev/media0: 7, Succeeded: 7, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for camera-dip device /dev/v4l-subdev0: > > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000006 > Type : V4L Sub-Device > Entity Info: > ID : 0x00000001 (1) > Name : MTK-ISP-DIP-V4L2 > Function : Video Pixel Formatter > Pad 0x01000002 : 0: Sink > Link 0x0200000c: from remote pad 0x1000009 of entity 'MTK-ISP-DIP-V4L2 Raw Input': Data, Enabled > Pad 0x01000003 : 1: Sink > Link 0x02000014: from remote pad 0x1000011 of entity 'MTK-ISP-DIP-V4L2 Tuning': Data > Pad 0x01000004 : 2: Source > Link 0x0200001c: to remote pad 0x1000019 of entity 'MTK-ISP-DIP-V4L2 MDP0': Data, Enabled, Dynamic > Pad 0x01000005 : 3: Source > Link 0x02000024: to remote pad 0x1000021 of entity 'MTK-ISP-DIP-V4L2 MDP1': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > > Allow for multiple opens: > test second /dev/v4l-subdev0 open: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Sub-Device ioctls (Sink Pad 0): > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > Sub-Device ioctls (Sink Pad 1): > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > Sub-Device ioctls (Source Pad 2): > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > Sub-Device ioctls (Source Pad 3): > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) > test VIDIOC_QUERYCTRL: OK (Not Supported) > test VIDIOC_G/S_CTRL: OK (Not Supported) > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK (Not Supported) > test VIDIOC_TRY_FMT: OK (Not Supported) > test VIDIOC_S_FMT: OK (Not Supported) > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) > test VIDIOC_EXPBUF: OK (Not Supported) > test Requests: OK (Not Supported) > > Total for camera-dip device /dev/v4l-subdev0: 69, Succeeded: 69, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-V4L device /dev/video0: > > Driver Info: > Driver name : MTK-ISP-DIP-V4L > Card type : MTK-ISP-DIP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84202000 > Video Output Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04202000 > Video Output Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x0300000a > Type : V4L Video > Entity Info: > ID : 0x00000008 (8) > Name : MTK-ISP-DIP-V4L2 Raw Input > Function : V4L2 I/O > Pad 0x01000009 : 0: Source > Link 0x0200000c: to remote pad 0x1000002 of entity 'MTK-ISP-DIP-V4L2': Data, Enabled > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video0 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-V4L device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-V4L device /dev/video0: > > Driver Info: > Driver name : MTK-ISP-DIP-V4L > Card type : MTK-ISP-DIP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84202000 > Video Output Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04202000 > Video Output Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x0300000a > Type : V4L Video > Entity Info: > ID : 0x00000008 (8) > Name : MTK-ISP-DIP-V4L2 Raw Input > Function : V4L2 I/O > Pad 0x01000009 : 0: Source > Link 0x0200000c: to remote pad 0x1000002 of entity 'MTK-ISP-DIP-V4L2': Data, Enabled > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video0 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-V4L device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-V4L device /dev/video1: > > Driver Info: > Driver name : MTK-ISP-DIP-V4L > Card type : MTK-ISP-DIP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x8c200000 > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x0c200000 > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000012 > Type : V4L Video > Entity Info: > ID : 0x00000010 (16) > Name : MTK-ISP-DIP-V4L2 Tuning > Function : V4L2 I/O > Pad 0x01000011 : 0: Source > Link 0x02000014: to remote pad 0x1000003 of entity 'MTK-ISP-DIP-V4L2': Data > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video1 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-V4L device /dev/video1: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-V4L device /dev/video1: > > Driver Info: > Driver name : MTK-ISP-DIP-V4L > Card type : MTK-ISP-DIP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x8c200000 > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x0c200000 > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000012 > Type : V4L Video > Entity Info: > ID : 0x00000010 (16) > Name : MTK-ISP-DIP-V4L2 Tuning > Function : V4L2 I/O > Pad 0x01000011 : 0: Source > Link 0x02000014: to remote pad 0x1000003 of entity 'MTK-ISP-DIP-V4L2': Data > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video1 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-V4L device /dev/video1: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-V4L device /dev/video2: > > Driver Info: > Driver name : MTK-ISP-DIP-V4L > Card type : MTK-ISP-DIP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x0300001a > Type : V4L Video > Entity Info: > ID : 0x00000018 (24) > Name : MTK-ISP-DIP-V4L2 MDP0 > Function : V4L2 I/O > Pad 0x01000019 : 0: Sink > Link 0x0200001c: from remote pad 0x1000004 of entity 'MTK-ISP-DIP-V4L2': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video2 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 2 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-V4L device /dev/video2: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-V4L device /dev/video2: > > Driver Info: > Driver name : MTK-ISP-DIP-V4L > Card type : MTK-ISP-DIP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x0300001a > Type : V4L Video > Entity Info: > ID : 0x00000018 (24) > Name : MTK-ISP-DIP-V4L2 MDP0 > Function : V4L2 I/O > Pad 0x01000019 : 0: Sink > Link 0x0200001c: from remote pad 0x1000004 of entity 'MTK-ISP-DIP-V4L2': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video2 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 2 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-V4L device /dev/video2: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-V4L device /dev/video3: > > Driver Info: > Driver name : MTK-ISP-DIP-V4L > Card type : MTK-ISP-DIP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000022 > Type : V4L Video > Entity Info: > ID : 0x00000020 (32) > Name : MTK-ISP-DIP-V4L2 MDP1 > Function : V4L2 I/O > Pad 0x01000021 : 0: Sink > Link 0x02000024: from remote pad 0x1000005 of entity 'MTK-ISP-DIP-V4L2': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video3 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-V4L device /dev/video3: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-V4L device /dev/video3: > > Driver Info: > Driver name : MTK-ISP-DIP-V4L > Card type : MTK-ISP-DIP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000022 > Type : V4L Video > Entity Info: > ID : 0x00000020 (32) > Name : MTK-ISP-DIP-V4L2 MDP1 > Function : V4L2 I/O > Pad 0x01000021 : 0: Sink > Link 0x02000024: from remote pad 0x1000005 of entity 'MTK-ISP-DIP-V4L2': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video3 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-V4L device /dev/video3: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for camera-dip device /dev/v4l-subdev1: > > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x0300002d > Type : V4L Sub-Device > Entity Info: > ID : 0x00000028 (40) > Name : MTK-ISP-DIP-CAP-V4L2 > Function : Video Pixel Formatter > Pad 0x01000029 : 0: Sink > Link 0x02000033: from remote pad 0x1000030 of entity 'MTK-ISP-DIP-CAP-V4L2 Raw Input': Data, Enabled > Pad 0x0100002a : 1: Sink > Link 0x0200003b: from remote pad 0x1000038 of entity 'MTK-ISP-DIP-CAP-V4L2 Tuning': Data > Pad 0x0100002b : 2: Source > Link 0x02000043: to remote pad 0x1000040 of entity 'MTK-ISP-DIP-CAP-V4L2 MDP0': Data, Enabled, Dynamic > Pad 0x0100002c : 3: Source > Link 0x0200004b: to remote pad 0x1000048 of entity 'MTK-ISP-DIP-CAP-V4L2 MDP1': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > > Allow for multiple opens: > test second /dev/v4l-subdev1 open: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Sub-Device ioctls (Sink Pad 0): > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > Sub-Device ioctls (Sink Pad 1): > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > Sub-Device ioctls (Source Pad 2): > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > Sub-Device ioctls (Source Pad 3): > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) > test VIDIOC_QUERYCTRL: OK (Not Supported) > test VIDIOC_G/S_CTRL: OK (Not Supported) > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK (Not Supported) > test VIDIOC_TRY_FMT: OK (Not Supported) > test VIDIOC_S_FMT: OK (Not Supported) > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) > test VIDIOC_EXPBUF: OK (Not Supported) > test Requests: OK (Not Supported) > > Total for camera-dip device /dev/v4l-subdev1: 69, Succeeded: 69, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-CAP device /dev/video4: > > Driver Info: > Driver name : MTK-ISP-DIP-CAP > Card type : MTK-ISP-DIP-CAP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84202000 > Video Output Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04202000 > Video Output Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000031 > Type : V4L Video > Entity Info: > ID : 0x0000002f (47) > Name : MTK-ISP-DIP-CAP-V4L2 Raw Input > Function : V4L2 I/O > Pad 0x01000030 : 0: Source > Link 0x02000033: to remote pad 0x1000029 of entity 'MTK-ISP-DIP-CAP-V4L2': Data, Enabled > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video4 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-CAP device /dev/video4: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-CAP device /dev/video4: > > Driver Info: > Driver name : MTK-ISP-DIP-CAP > Card type : MTK-ISP-DIP-CAP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84202000 > Video Output Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04202000 > Video Output Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000031 > Type : V4L Video > Entity Info: > ID : 0x0000002f (47) > Name : MTK-ISP-DIP-CAP-V4L2 Raw Input > Function : V4L2 I/O > Pad 0x01000030 : 0: Source > Link 0x02000033: to remote pad 0x1000029 of entity 'MTK-ISP-DIP-CAP-V4L2': Data, Enabled > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video4 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-CAP device /dev/video4: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-CAP device /dev/video5: > > Driver Info: > Driver name : MTK-ISP-DIP-CAP > Card type : MTK-ISP-DIP-CAP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x8c200000 > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x0c200000 > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000039 > Type : V4L Video > Entity Info: > ID : 0x00000037 (55) > Name : MTK-ISP-DIP-CAP-V4L2 Tuning > Function : V4L2 I/O > Pad 0x01000038 : 0: Source > Link 0x0200003b: to remote pad 0x100002a of entity 'MTK-ISP-DIP-CAP-V4L2': Data > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video5 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-CAP device /dev/video5: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-CAP device /dev/video5: > > Driver Info: > Driver name : MTK-ISP-DIP-CAP > Card type : MTK-ISP-DIP-CAP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x8c200000 > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x0c200000 > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000039 > Type : V4L Video > Entity Info: > ID : 0x00000037 (55) > Name : MTK-ISP-DIP-CAP-V4L2 Tuning > Function : V4L2 I/O > Pad 0x01000038 : 0: Source > Link 0x0200003b: to remote pad 0x100002a of entity 'MTK-ISP-DIP-CAP-V4L2': Data > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video5 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-CAP device /dev/video5: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-CAP device /dev/video6: > > Driver Info: > Driver name : MTK-ISP-DIP-CAP > Card type : MTK-ISP-DIP-CAP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000041 > Type : V4L Video > Entity Info: > ID : 0x0000003f (63) > Name : MTK-ISP-DIP-CAP-V4L2 MDP0 > Function : V4L2 I/O > Pad 0x01000040 : 0: Sink > Link 0x02000043: from remote pad 0x100002b of entity 'MTK-ISP-DIP-CAP-V4L2': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video6 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 2 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-CAP device /dev/video6: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-CAP device /dev/video6: > > Driver Info: > Driver name : MTK-ISP-DIP-CAP > Card type : MTK-ISP-DIP-CAP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000041 > Type : V4L Video > Entity Info: > ID : 0x0000003f (63) > Name : MTK-ISP-DIP-CAP-V4L2 MDP0 > Function : V4L2 I/O > Pad 0x01000040 : 0: Sink > Link 0x02000043: from remote pad 0x100002b of entity 'MTK-ISP-DIP-CAP-V4L2': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video6 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 2 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-CAP device /dev/video6: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-CAP device /dev/video7: > > Driver Info: > Driver name : MTK-ISP-DIP-CAP > Card type : MTK-ISP-DIP-CAP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000049 > Type : V4L Video > Entity Info: > ID : 0x00000047 (71) > Name : MTK-ISP-DIP-CAP-V4L2 MDP1 > Function : V4L2 I/O > Pad 0x01000048 : 0: Sink > Link 0x0200004b: from remote pad 0x100002c of entity 'MTK-ISP-DIP-CAP-V4L2': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video7 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-CAP device /dev/video7: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-CAP device /dev/video7: > > Driver Info: > Driver name : MTK-ISP-DIP-CAP > Card type : MTK-ISP-DIP-CAP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000049 > Type : V4L Video > Entity Info: > ID : 0x00000047 (71) > Name : MTK-ISP-DIP-CAP-V4L2 MDP1 > Function : V4L2 I/O > Pad 0x01000048 : 0: Sink > Link 0x0200004b: from remote pad 0x100002c of entity 'MTK-ISP-DIP-CAP-V4L2': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video7 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-CAP device /dev/video7: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for camera-dip device /dev/v4l-subdev2: > > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000054 > Type : V4L Sub-Device > Entity Info: > ID : 0x0000004f (79) > Name : MTK-ISP-DIP-REP-V4L2 > Function : Video Pixel Formatter > Pad 0x01000050 : 0: Sink > Link 0x0200005a: from remote pad 0x1000057 of entity 'MTK-ISP-DIP-REP-V4L2 Raw Input': Data, Enabled > Pad 0x01000051 : 1: Sink > Link 0x02000062: from remote pad 0x100005f of entity 'MTK-ISP-DIP-REP-V4L2 Tuning': Data > Pad 0x01000052 : 2: Source > Link 0x0200006a: to remote pad 0x1000067 of entity 'MTK-ISP-DIP-REP-V4L2 MDP0': Data, Enabled, Dynamic > Pad 0x01000053 : 3: Source > Link 0x02000072: to remote pad 0x100006f of entity 'MTK-ISP-DIP-REP-V4L2 MDP1': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > > Allow for multiple opens: > test second /dev/v4l-subdev2 open: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Sub-Device ioctls (Sink Pad 0): > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > Sub-Device ioctls (Sink Pad 1): > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > Sub-Device ioctls (Source Pad 2): > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > Sub-Device ioctls (Source Pad 3): > test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Try VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test Active VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_FMT: OK (Not Supported) > test Active VIDIOC_SUBDEV_G/S_SELECTION/CROP: OK (Not Supported) > test VIDIOC_SUBDEV_G/S_FRAME_INTERVAL: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) > test VIDIOC_QUERYCTRL: OK (Not Supported) > test VIDIOC_G/S_CTRL: OK (Not Supported) > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK (Not Supported) > test VIDIOC_TRY_FMT: OK (Not Supported) > test VIDIOC_S_FMT: OK (Not Supported) > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) > test VIDIOC_EXPBUF: OK (Not Supported) > test Requests: OK (Not Supported) > > Total for camera-dip device /dev/v4l-subdev2: 69, Succeeded: 69, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-REP device /dev/video8: > > Driver Info: > Driver name : MTK-ISP-DIP-REP > Card type : MTK-ISP-DIP-REP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84202000 > Video Output Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04202000 > Video Output Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000058 > Type : V4L Video > Entity Info: > ID : 0x00000056 (86) > Name : MTK-ISP-DIP-REP-V4L2 Raw Input > Function : V4L2 I/O > Pad 0x01000057 : 0: Source > Link 0x0200005a: to remote pad 0x1000050 of entity 'MTK-ISP-DIP-REP-V4L2': Data, Enabled > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video8 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-REP device /dev/video8: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-REP device /dev/video8: > > Driver Info: > Driver name : MTK-ISP-DIP-REP > Card type : MTK-ISP-DIP-REP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84202000 > Video Output Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04202000 > Video Output Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000058 > Type : V4L Video > Entity Info: > ID : 0x00000056 (86) > Name : MTK-ISP-DIP-REP-V4L2 Raw Input > Function : V4L2 I/O > Pad 0x01000057 : 0: Source > Link 0x0200005a: to remote pad 0x1000050 of entity 'MTK-ISP-DIP-REP-V4L2': Data, Enabled > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video8 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-REP device /dev/video8: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-REP device /dev/video9: > > Driver Info: > Driver name : MTK-ISP-DIP-REP > Card type : MTK-ISP-DIP-REP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x8c200000 > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x0c200000 > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000060 > Type : V4L Video > Entity Info: > ID : 0x0000005e (94) > Name : MTK-ISP-DIP-REP-V4L2 Tuning > Function : V4L2 I/O > Pad 0x0100005f : 0: Source > Link 0x02000062: to remote pad 0x1000051 of entity 'MTK-ISP-DIP-REP-V4L2': Data > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video9 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-REP device /dev/video9: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-REP device /dev/video9: > > Driver Info: > Driver name : MTK-ISP-DIP-REP > Card type : MTK-ISP-DIP-REP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x8c200000 > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x0c200000 > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000060 > Type : V4L Video > Entity Info: > ID : 0x0000005e (94) > Name : MTK-ISP-DIP-REP-V4L2 Tuning > Function : V4L2 I/O > Pad 0x0100005f : 0: Source > Link 0x02000062: to remote pad 0x1000051 of entity 'MTK-ISP-DIP-REP-V4L2': Data > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video9 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-REP device /dev/video9: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-REP device /dev/video10: > > Driver Info: > Driver name : MTK-ISP-DIP-REP > Card type : MTK-ISP-DIP-REP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000068 > Type : V4L Video > Entity Info: > ID : 0x00000066 (102) > Name : MTK-ISP-DIP-REP-V4L2 MDP0 > Function : V4L2 I/O > Pad 0x01000067 : 0: Sink > Link 0x0200006a: from remote pad 0x1000052 of entity 'MTK-ISP-DIP-REP-V4L2': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video10 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 2 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-REP device /dev/video10: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-REP device /dev/video10: > > Driver Info: > Driver name : MTK-ISP-DIP-REP > Card type : MTK-ISP-DIP-REP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000068 > Type : V4L Video > Entity Info: > ID : 0x00000066 (102) > Name : MTK-ISP-DIP-REP-V4L2 MDP0 > Function : V4L2 I/O > Pad 0x01000067 : 0: Sink > Link 0x0200006a: from remote pad 0x1000052 of entity 'MTK-ISP-DIP-REP-V4L2': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video10 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 2 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-REP device /dev/video10: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-REP device /dev/video11: > > Driver Info: > Driver name : MTK-ISP-DIP-REP > Card type : MTK-ISP-DIP-REP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000070 > Type : V4L Video > Entity Info: > ID : 0x0000006e (110) > Name : MTK-ISP-DIP-REP-V4L2 MDP1 > Function : V4L2 I/O > Pad 0x0100006f : 0: Sink > Link 0x02000072: from remote pad 0x1000053 of entity 'MTK-ISP-DIP-REP-V4L2': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video11 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-REP device /dev/video11: 45, Succeeded: 45, Failed: 0, Warnings: 0 > -------------------------------------------------------------------------------- > Compliance test for MTK-ISP-DIP-REP device /dev/video11: > > Driver Info: > Driver name : MTK-ISP-DIP-REP > Card type : MTK-ISP-DIP-REP-V4L2 > Bus info : platform:15022000.dip > Driver version : 4.19.56 > Capabilities : 0x84201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04201000 > Video Capture Multiplanar > Streaming > Extended Pix Format > Media Driver Info: > Driver name : camera-dip > Model : MTK-ISP-DIP-V4L2 > Serial : > Bus info : platform:15022000.dip > Media version : 4.19.56 > Hardware revision: 0x00000000 (0) > Driver version : 4.19.56 > Interface Info: > ID : 0x03000070 > Type : V4L Video > Entity Info: > ID : 0x0000006e (110) > Name : MTK-ISP-DIP-REP-V4L2 MDP1 > Function : V4L2 I/O > Pad 0x0100006f : 0: Sink > Link 0x02000072: from remote pad 0x1000053 of entity 'MTK-ISP-DIP-REP-V4L2': Data, Enabled, Dynamic > > Required ioctls: > test MC information (see 'Media Driver Info' above): OK > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second /dev/video11 open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > test Requests: OK > > Total for MTK-ISP-DIP-REP device /dev/video11: 45, Succeeded: 45, Failed: 0, Warnings: 0 > > Grand Total for camera-dip device /dev/media0: 1294, Succeeded: 1294, Failed: 0, Warnings: 0 > > > Frederic Chen (6): > dt-bindings: mt8183: Added DIP dt-bindings > dts: arm64: mt8183: Add DIP nodes > media: platform: Add Mediatek DIP driver KConfig > platform: mtk-isp: Add Mediatek DIP driver > remoteproc/mediatek: add SCP's shared dma pool support for mt8183 > media: platform: mtk-mdp3: Added struct tuning_addr > > .../bindings/media/mediatek,mt8183-dip.txt | 40 + > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 16 + > drivers/media/platform/Kconfig | 2 + > drivers/media/platform/mtk-isp/Kconfig | 21 + > drivers/media/platform/mtk-isp/Makefile | 18 + > .../media/platform/mtk-isp/isp_50/Makefile | 4 + > .../platform/mtk-isp/isp_50/dip/Makefile | 18 + > .../platform/mtk-isp/isp_50/dip/mtk_dip-dev.c | 769 +++++++ > .../platform/mtk-isp/isp_50/dip/mtk_dip-dev.h | 337 ++++ > .../platform/mtk-isp/isp_50/dip/mtk_dip-hw.h | 155 ++ > .../platform/mtk-isp/isp_50/dip/mtk_dip-sys.c | 794 ++++++++ > .../mtk-isp/isp_50/dip/mtk_dip-v4l2.c | 1786 +++++++++++++++++ > drivers/media/platform/mtk-mdp3/mtk-img-ipi.h | 8 +- > drivers/remoteproc/mtk_scp.c | 54 +- > 14 files changed, 4000 insertions(+), 22 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8183-dip.txt > create mode 100644 drivers/media/platform/mtk-isp/Kconfig > create mode 100644 drivers/media/platform/mtk-isp/Makefile > create mode 100644 drivers/media/platform/mtk-isp/isp_50/Makefile > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/Makefile > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c > > -- > 2.18.0 > > ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2019-08-30 7:14 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-08 11:04 [RFC PATCH V2 0/6] media: platform: Add support for Digital Image Processing (DIP) on mt8183 SoC frederic.chen-NuS5LvNUpcJWk0Htik3J/w
[not found] ` <20190708110500.7242-1-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-07-08 11:04 ` [RFC PATCH V2 1/6] dt-bindings: mt8183: Added DIP dt-bindings frederic.chen-NuS5LvNUpcJWk0Htik3J/w
2019-07-24 16:49 ` Rob Herring
2019-07-08 11:04 ` [RFC PATCH V2 2/6] dts: arm64: mt8183: Add DIP nodes frederic.chen-NuS5LvNUpcJWk0Htik3J/w
2019-07-08 11:04 ` [RFC PATCH V2 3/6] media: platform: Add Mediatek DIP driver KConfig frederic.chen-NuS5LvNUpcJWk0Htik3J/w
2019-07-08 11:04 ` [RFC PATCH V2 4/6] platform: mtk-isp: Add Mediatek DIP driver frederic.chen-NuS5LvNUpcJWk0Htik3J/w
[not found] ` <20190708110500.7242-5-frederic.chen-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-07-31 7:10 ` Tomasz Figa
[not found] ` <20190731071014.GA43159-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2019-08-27 3:16 ` Frederic Chen
2019-08-30 7:14 ` Tomasz Figa
2019-07-08 11:04 ` [RFC PATCH V2 5/6] remoteproc/mediatek: add SCP's shared dma pool support for mt8183 frederic.chen-NuS5LvNUpcJWk0Htik3J/w
2019-07-08 11:05 ` [RFC PATCH V2 6/6] media: platform: mtk-mdp3: Add struct tuning_addr to identify user tuning data frederic.chen-NuS5LvNUpcJWk0Htik3J/w
2019-07-28 5:00 ` [RFC PATCH V2 0/6] media: platform: Add support for Digital Image Processing (DIP) on mt8183 SoC Tomasz Figa
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).