* [V3, 0/2] media: ov8856: Add YAML binding and sensor mode support
@ 2019-10-31 9:02 Dongchun Zhu
2019-10-31 9:02 ` [V3, 1/2] media: dt-bindings: ov8856: Document YAML bindings Dongchun Zhu
2019-10-31 9:02 ` [V3, 2/2] media: i2c: ov8856: Add support for more sensor modes Dongchun Zhu
0 siblings, 2 replies; 6+ messages in thread
From: Dongchun Zhu @ 2019-10-31 9:02 UTC (permalink / raw)
To: mchehab, andriy.shevchenko, robh+dt, mark.rutland, sakari.ailus,
drinkcat, tfiga, matthias.bgg, bingbu.cao
Cc: srv_heupstream, linux-mediatek, linux-arm-kernel, sj.huang,
linux-media, devicetree, louis.kuo, shengnan.wang, dongchun.zhu
Hello,
This series adds new DT bindings in YAML and two more sensor modes for users to call.
From the latest ov8856 datasheet, it is proposed to adopt the resolution of 1632*1224 and 3264*2448,
together with Bayer Order of BGGR. Here two more scenario settings are provided.
The hardware revision of ov8856 could be distinguished from one OTP SRAM register R700F.
PLL register R3614 requires to be correspondingly updated.
For instance, 0x20 is suggested for 1B camera module.
Finally, The driver has been validated in camera features on CrOS application.
Changes of V3 mainly address comments from Andy, Tomasz, Sakari, Rob.
- Convert text documentation to YAML schema.
- Enable VSYNC singal output
- Add ov8856_runtime_suspend() which would call __ov8856_power_off()
- Add ov8856_runtime_resume() which would call __ov8856_power_on()
- Fix other reviewed issues in V2
Mainly changes of V2 are addressing the comments from Sakari, Tomasz,
including,
- Add clock-frequency and link-frequencies in DT
- Re-define some macros like R3614, R3d84, n_shutdn
- Rename OV8856_MCLK to OV8856_XVCLK per datasheet
- Refine ov8856_update_otp_reg, ov8856_configure_regulators and ov8856_cal_delay
- Set the bayer order in the mode struct, and directly links to register R3808, R3809
- Remove or refine redundant log print
- Fix other reviewed issues in V1
Dongchun Zhu (2):
media: dt-bindings: ov8856: Document YAML bindings
media: i2c: ov8856: Add support for more sensor modes
.../devicetree/bindings/media/i2c/ov8856.yaml | 126 ++++
MAINTAINERS | 1 +
drivers/media/i2c/ov8856.c | 661 ++++++++++++++++++++-
3 files changed, 779 insertions(+), 9 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml
--
2.9.2
^ permalink raw reply [flat|nested] 6+ messages in thread
* [V3, 1/2] media: dt-bindings: ov8856: Document YAML bindings
2019-10-31 9:02 [V3, 0/2] media: ov8856: Add YAML binding and sensor mode support Dongchun Zhu
@ 2019-10-31 9:02 ` Dongchun Zhu
2019-10-31 16:38 ` Rob Herring
2019-10-31 9:02 ` [V3, 2/2] media: i2c: ov8856: Add support for more sensor modes Dongchun Zhu
1 sibling, 1 reply; 6+ messages in thread
From: Dongchun Zhu @ 2019-10-31 9:02 UTC (permalink / raw)
To: mchehab, andriy.shevchenko, robh+dt, mark.rutland, sakari.ailus,
drinkcat, tfiga, matthias.bgg, bingbu.cao
Cc: srv_heupstream, linux-mediatek, linux-arm-kernel, sj.huang,
linux-media, devicetree, louis.kuo, shengnan.wang, dongchun.zhu
This patch adds documentation of device tree in YAML schema for the
OV8856 CMOS image sensor.
Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
---
.../devicetree/bindings/media/i2c/ov8856.yaml | 126 +++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 127 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
new file mode 100644
index 0000000..a161812
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2019 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
+
+maintainers:
+ - Ben Kao <ben.kao@intel.com>
+ - Dongchun Zhu <dongchun.zhu@mediatek.com>
+
+description: |-
+ The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
+ image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
+ sub-sampled, and windowed 10-bit MIPI images in various formats via the
+ Serial Camera Control Bus (SCCB) interface. This chip is programmable
+ through I2C and two-wire SCCB. The sensor output is available via CSI-2
+ serial data output (up to 4-lane).
+
+properties:
+ compatible:
+ const: ovti,ov8856
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description:
+ Input clock for the sensor.
+ items:
+ - const: xvclk
+
+ clock-frequency:
+ description:
+ Frequency of the xvclk clock in Hertz.
+
+ dovdd-supply:
+ description:
+ Definition of the regulator used as interface power supply.
+ maxItems: 1
+
+ avdd-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+ maxItems: 1
+
+ dvdd-supply:
+ description:
+ Definition of the regulator used as digital power supply.
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ The phandle and specifier for the GPIO that controls sensor reset.
+ maxItems: 1
+
+ # See ../video-interfaces.txt for details
+ port:
+ type: object
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ remote-endpoint: true
+ data-lanes: true
+ link-frequencies: true
+
+ required:
+ - remote-endpoint
+ - data-lanes
+ - link-frequencies
+
+ required
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - clock-frequency
+ - dovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - reset-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ ov8856: camera-sensor@10 {
+ compatible = "ovti,ov8856";
+ reg = <0x10>;
+ reset-gpios = <&pio 111 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk_24m_cam>;
+
+ clocks = <&cru SCLK_TESTCLKOUT1>;
+ clock-names = "xvclk";
+ clock-frequency = <19200000>;
+
+ avdd-supply = <&mt6358_vcama2_reg>;
+ dvdd-supply = <&mt6358_vcamd_reg>;
+ dovdd-supply = <&mt6358_vcamio_reg>;
+
+ port {
+ wcam_out: endpoint {
+ remote-endpoint = <&mipi_in_wcam>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <360000000 180000000>;
+ };
+ };
+ };
+
+...
\ No newline at end of file
diff --git a/MAINTAINERS b/MAINTAINERS
index 296de2b..4cbae26 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12037,6 +12037,7 @@ L: linux-media@vger.kernel.org
T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/i2c/ov8856.c
+F: Documentation/devicetree/bindings/media/i2c/ov8856.yaml
OMNIVISION OV9650 SENSOR DRIVER
M: Sakari Ailus <sakari.ailus@linux.intel.com>
--
2.9.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [V3, 2/2] media: i2c: ov8856: Add support for more sensor modes
2019-10-31 9:02 [V3, 0/2] media: ov8856: Add YAML binding and sensor mode support Dongchun Zhu
2019-10-31 9:02 ` [V3, 1/2] media: dt-bindings: ov8856: Document YAML bindings Dongchun Zhu
@ 2019-10-31 9:02 ` Dongchun Zhu
2019-10-31 17:04 ` Sakari Ailus
2019-11-25 9:33 ` Pi-Hsun Shih
1 sibling, 2 replies; 6+ messages in thread
From: Dongchun Zhu @ 2019-10-31 9:02 UTC (permalink / raw)
To: mchehab, andriy.shevchenko, robh+dt, mark.rutland, sakari.ailus,
drinkcat, tfiga, matthias.bgg, bingbu.cao
Cc: srv_heupstream, linux-mediatek, linux-arm-kernel, sj.huang,
linux-media, devicetree, louis.kuo, shengnan.wang, dongchun.zhu
This adds two more sensor modes for Omnivision ov8856 image sensor,
including the resolution of 1632*1224 and 3264*2448, both with the
Bayer Order of BGGR.
Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
---
drivers/media/i2c/ov8856.c | 661 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 652 insertions(+), 9 deletions(-)
diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
index 8655842..4815c26 100644
--- a/drivers/media/i2c/ov8856.c
+++ b/drivers/media/i2c/ov8856.c
@@ -3,10 +3,13 @@
#include <asm/unaligned.h>
#include <linux/acpi.h>
+#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-fwnode.h>
@@ -18,10 +21,15 @@
#define OV8856_LINK_FREQ_360MHZ 360000000ULL
#define OV8856_LINK_FREQ_180MHZ 180000000ULL
#define OV8856_SCLK 144000000ULL
-#define OV8856_MCLK 19200000
+#define OV8856_XVCLK_19_2 19200000
+#define OV8856_XVCLK_24 24000000
#define OV8856_DATA_LANES 4
#define OV8856_RGB_DEPTH 10
+#define REG_X_ADDR_START 0x3808
+#define X_OUTPUT_FULL_SIZE 0x0cc0
+#define X_OUTPUT_BINNING_SIZE 0x0660
+
#define OV8856_REG_CHIP_ID 0x300a
#define OV8856_CHIP_ID 0x00885a
@@ -29,6 +37,22 @@
#define OV8856_MODE_STANDBY 0x00
#define OV8856_MODE_STREAMING 0x01
+/* define 1B module revision */
+#define OV8856_1B_MODULE 0x02
+
+/* the OTP read-out buffer is at 0x7000 and 0xf is the offset
+ * of the byte in the OTP that means the module revision
+ */
+#define OV8856_MODULE_REVISION 0x700f
+#define OV8856_OTP_MODE_CTRL 0x3d84
+#define OV8856_OTP_LOAD_CTRL 0x3d81
+#define OV8856_OTP_MODE_AUTO 0x00
+#define OV8856_OTP_LOAD_CTRL_ENABLE BIT(0)
+
+/* Analog control register that decided by module revision */
+#define OV8856_ANAL_MODE_CTRL 0x3614
+#define OV8856_ANAL_1B_VAL 0x20
+
/* vertical-timings from sensor */
#define OV8856_REG_VTS 0x380e
#define OV8856_VTS_MAX 0x7fff
@@ -64,6 +88,14 @@
#define to_ov8856(_sd) container_of(_sd, struct ov8856, sd)
+static const char * const ov8856_supply_names[] = {
+ "dovdd", /* Digital I/O power */
+ "avdd", /* Analog power */
+ "dvdd", /* Digital core power */
+};
+
+#define OV8856_NUM_SUPPLIES ARRAY_SIZE(ov8856_supply_names)
+
enum {
OV8856_LINK_FREQ_720MBPS,
OV8856_LINK_FREQ_360MBPS,
@@ -316,6 +348,209 @@ static const struct ov8856_reg mode_3280x2464_regs[] = {
{0x5e00, 0x00}
};
+static const struct ov8856_reg mode_3264x2448_regs[] = {
+ {0x0103, 0x01},
+ {0x0302, 0x3c},
+ {0x0303, 0x01},
+ {0x031e, 0x0c},
+ {0x3000, 0x20},
+ {0x3003, 0x08},
+ {0x300e, 0x20},
+ {0x3010, 0x00},
+ {0x3015, 0x84},
+ {0x3018, 0x72},
+ {0x3021, 0x23},
+ {0x3033, 0x24},
+ {0x3500, 0x00},
+ {0x3501, 0x9a},
+ {0x3502, 0x20},
+ {0x3503, 0x08},
+ {0x3505, 0x83},
+ {0x3508, 0x01},
+ {0x3509, 0x80},
+ {0x350c, 0x00},
+ {0x350d, 0x80},
+ {0x350e, 0x04},
+ {0x350f, 0x00},
+ {0x3510, 0x00},
+ {0x3511, 0x02},
+ {0x3512, 0x00},
+ {0x3600, 0x72},
+ {0x3601, 0x40},
+ {0x3602, 0x30},
+ {0x3610, 0xc5},
+ {0x3611, 0x58},
+ {0x3612, 0x5c},
+ {0x3613, 0xca},
+ {0x3614, 0x60},
+ {0x3628, 0xff},
+ {0x3629, 0xff},
+ {0x362a, 0xff},
+ {0x3633, 0x10},
+ {0x3634, 0x10},
+ {0x3635, 0x10},
+ {0x3636, 0x10},
+ {0x3663, 0x08},
+ {0x3669, 0x34},
+ {0x366d, 0x00},
+ {0x366e, 0x10},
+ {0x3706, 0x86},
+ {0x370b, 0x7e},
+ {0x3714, 0x23},
+ {0x3730, 0x12},
+ {0x3733, 0x10},
+ {0x3764, 0x00},
+ {0x3765, 0x00},
+ {0x3769, 0x62},
+ {0x376a, 0x2a},
+ {0x376b, 0x30},
+ {0x3780, 0x00},
+ {0x3781, 0x24},
+ {0x3782, 0x00},
+ {0x3783, 0x23},
+ {0x3798, 0x2f},
+ {0x37a1, 0x60},
+ {0x37a8, 0x6a},
+ {0x37ab, 0x3f},
+ {0x37c2, 0x04},
+ {0x37c3, 0xf1},
+ {0x37c9, 0x80},
+ {0x37cb, 0x16},
+ {0x37cc, 0x16},
+ {0x37cd, 0x16},
+ {0x37ce, 0x16},
+ {0x3800, 0x00},
+ {0x3801, 0x00},
+ {0x3802, 0x00},
+ {0x3803, 0x0c},
+ {0x3804, 0x0c},
+ {0x3805, 0xdf},
+ {0x3806, 0x09},
+ {0x3807, 0xa3},
+ {0x3808, 0x0c},
+ {0x3809, 0xc0},
+ {0x380a, 0x09},
+ {0x380b, 0x90},
+ {0x380c, 0x07},
+ {0x380d, 0x8c},
+ {0x380e, 0x09},
+ {0x380f, 0xb2},
+ {0x3810, 0x00},
+ {0x3811, 0x04},
+ {0x3812, 0x00},
+ {0x3813, 0x02},
+ {0x3814, 0x01},
+ {0x3815, 0x01},
+ {0x3816, 0x00},
+ {0x3817, 0x00},
+ {0x3818, 0x00},
+ {0x3819, 0x10},
+ {0x3820, 0x80},
+ {0x3821, 0x46},
+ {0x382a, 0x01},
+ {0x382b, 0x01},
+ {0x3830, 0x06},
+ {0x3836, 0x02},
+ {0x3862, 0x04},
+ {0x3863, 0x08},
+ {0x3cc0, 0x33},
+ {0x3d85, 0x17},
+ {0x3d8c, 0x73},
+ {0x3d8d, 0xde},
+ {0x4001, 0xe0},
+ {0x4003, 0x40},
+ {0x4008, 0x00},
+ {0x4009, 0x0b},
+ {0x400a, 0x00},
+ {0x400b, 0x84},
+ {0x400f, 0x80},
+ {0x4010, 0xf0},
+ {0x4011, 0xff},
+ {0x4012, 0x02},
+ {0x4013, 0x01},
+ {0x4014, 0x01},
+ {0x4015, 0x01},
+ {0x4042, 0x00},
+ {0x4043, 0x80},
+ {0x4044, 0x00},
+ {0x4045, 0x80},
+ {0x4046, 0x00},
+ {0x4047, 0x80},
+ {0x4048, 0x00},
+ {0x4049, 0x80},
+ {0x4041, 0x03},
+ {0x404c, 0x20},
+ {0x404d, 0x00},
+ {0x404e, 0x20},
+ {0x4203, 0x80},
+ {0x4307, 0x30},
+ {0x4317, 0x00},
+ {0x4502, 0x50},
+ {0x4503, 0x08},
+ {0x4601, 0x80},
+ {0x4800, 0x44},
+ {0x4816, 0x53},
+ {0x481b, 0x50},
+ {0x481f, 0x27},
+ {0x4823, 0x3c},
+ {0x482b, 0x00},
+ {0x4831, 0x66},
+ {0x4837, 0x16},
+ {0x483c, 0x0f},
+ {0x484b, 0x05},
+ {0x5000, 0x77},
+ {0x5001, 0x0a},
+ {0x5003, 0xc8},
+ {0x5004, 0x04},
+ {0x5006, 0x00},
+ {0x5007, 0x00},
+ {0x502e, 0x03},
+ {0x5030, 0x41},
+ {0x5780, 0x14},
+ {0x5781, 0x0f},
+ {0x5782, 0x44},
+ {0x5783, 0x02},
+ {0x5784, 0x01},
+ {0x5785, 0x01},
+ {0x5786, 0x00},
+ {0x5787, 0x04},
+ {0x5788, 0x02},
+ {0x5789, 0x0f},
+ {0x578a, 0xfd},
+ {0x578b, 0xf5},
+ {0x578c, 0xf5},
+ {0x578d, 0x03},
+ {0x578e, 0x08},
+ {0x578f, 0x0c},
+ {0x5790, 0x08},
+ {0x5791, 0x04},
+ {0x5792, 0x00},
+ {0x5793, 0x52},
+ {0x5794, 0xa3},
+ {0x5795, 0x02},
+ {0x5796, 0x20},
+ {0x5797, 0x20},
+ {0x5798, 0xd5},
+ {0x5799, 0xd5},
+ {0x579a, 0x00},
+ {0x579b, 0x50},
+ {0x579c, 0x00},
+ {0x579d, 0x2c},
+ {0x579e, 0x0c},
+ {0x579f, 0x40},
+ {0x57a0, 0x09},
+ {0x57a1, 0x40},
+ {0x59f8, 0x3d},
+ {0x5a08, 0x02},
+ {0x5b00, 0x02},
+ {0x5b01, 0x10},
+ {0x5b02, 0x03},
+ {0x5b03, 0xcf},
+ {0x5b05, 0x6c},
+ {0x5e00, 0x00},
+ {0x5e10, 0xfc}
+};
+
static const struct ov8856_reg mode_1640x1232_regs[] = {
{0x3000, 0x20},
{0x3003, 0x08},
@@ -506,6 +741,209 @@ static const struct ov8856_reg mode_1640x1232_regs[] = {
{0x5e00, 0x00}
};
+static const struct ov8856_reg mode_1632x1224_regs[] = {
+ {0x0103, 0x01},
+ {0x0302, 0x3c},
+ {0x0303, 0x01},
+ {0x031e, 0x0c},
+ {0x3000, 0x20},
+ {0x3003, 0x08},
+ {0x300e, 0x20},
+ {0x3010, 0x00},
+ {0x3015, 0x84},
+ {0x3018, 0x72},
+ {0x3021, 0x23},
+ {0x3033, 0x24},
+ {0x3500, 0x00},
+ {0x3501, 0x4c},
+ {0x3502, 0xe0},
+ {0x3503, 0x08},
+ {0x3505, 0x83},
+ {0x3508, 0x01},
+ {0x3509, 0x80},
+ {0x350c, 0x00},
+ {0x350d, 0x80},
+ {0x350e, 0x04},
+ {0x350f, 0x00},
+ {0x3510, 0x00},
+ {0x3511, 0x02},
+ {0x3512, 0x00},
+ {0x3600, 0x72},
+ {0x3601, 0x40},
+ {0x3602, 0x30},
+ {0x3610, 0xc5},
+ {0x3611, 0x58},
+ {0x3612, 0x5c},
+ {0x3613, 0xca},
+ {0x3614, 0x60},
+ {0x3628, 0xff},
+ {0x3629, 0xff},
+ {0x362a, 0xff},
+ {0x3633, 0x10},
+ {0x3634, 0x10},
+ {0x3635, 0x10},
+ {0x3636, 0x10},
+ {0x3663, 0x08},
+ {0x3669, 0x34},
+ {0x366d, 0x00},
+ {0x366e, 0x08},
+ {0x3706, 0x86},
+ {0x370b, 0x7e},
+ {0x3714, 0x27},
+ {0x3730, 0x12},
+ {0x3733, 0x10},
+ {0x3764, 0x00},
+ {0x3765, 0x00},
+ {0x3769, 0x62},
+ {0x376a, 0x2a},
+ {0x376b, 0x30},
+ {0x3780, 0x00},
+ {0x3781, 0x24},
+ {0x3782, 0x00},
+ {0x3783, 0x23},
+ {0x3798, 0x2f},
+ {0x37a1, 0x60},
+ {0x37a8, 0x6a},
+ {0x37ab, 0x3f},
+ {0x37c2, 0x14},
+ {0x37c3, 0xf1},
+ {0x37c9, 0x80},
+ {0x37cb, 0x16},
+ {0x37cc, 0x16},
+ {0x37cd, 0x16},
+ {0x37ce, 0x16},
+ {0x3800, 0x00},
+ {0x3801, 0x00},
+ {0x3802, 0x00},
+ {0x3803, 0x0c},
+ {0x3804, 0x0c},
+ {0x3805, 0xdf},
+ {0x3806, 0x09},
+ {0x3807, 0xa3},
+ {0x3808, 0x06},
+ {0x3809, 0x60},
+ {0x380a, 0x04},
+ {0x380b, 0xc8},
+ {0x380c, 0x07},
+ {0x380d, 0x8c},
+ {0x380e, 0x09},
+ {0x380f, 0xb2},
+ {0x3810, 0x00},
+ {0x3811, 0x02},
+ {0x3812, 0x00},
+ {0x3813, 0x02},
+ {0x3814, 0x03},
+ {0x3815, 0x01},
+ {0x3816, 0x00},
+ {0x3817, 0x00},
+ {0x3818, 0x00},
+ {0x3819, 0x10},
+ {0x3820, 0x80},
+ {0x3821, 0x47},
+ {0x382a, 0x03},
+ {0x382b, 0x01},
+ {0x3830, 0x06},
+ {0x3836, 0x02},
+ {0x3862, 0x04},
+ {0x3863, 0x08},
+ {0x3cc0, 0x33},
+ {0x3d85, 0x17},
+ {0x3d8c, 0x73},
+ {0x3d8d, 0xde},
+ {0x4001, 0xe0},
+ {0x4003, 0x40},
+ {0x4008, 0x00},
+ {0x4009, 0x05},
+ {0x400a, 0x00},
+ {0x400b, 0x84},
+ {0x400f, 0x80},
+ {0x4010, 0xf0},
+ {0x4011, 0xff},
+ {0x4012, 0x02},
+ {0x4013, 0x01},
+ {0x4014, 0x01},
+ {0x4015, 0x01},
+ {0x4042, 0x00},
+ {0x4043, 0x80},
+ {0x4044, 0x00},
+ {0x4045, 0x80},
+ {0x4046, 0x00},
+ {0x4047, 0x80},
+ {0x4048, 0x00},
+ {0x4049, 0x80},
+ {0x4041, 0x03},
+ {0x404c, 0x20},
+ {0x404d, 0x00},
+ {0x404e, 0x20},
+ {0x4203, 0x80},
+ {0x4307, 0x30},
+ {0x4317, 0x00},
+ {0x4502, 0x50},
+ {0x4503, 0x08},
+ {0x4601, 0x80},
+ {0x4800, 0x44},
+ {0x4816, 0x53},
+ {0x481b, 0x50},
+ {0x481f, 0x27},
+ {0x4823, 0x3c},
+ {0x482b, 0x00},
+ {0x4831, 0x66},
+ {0x4837, 0x16},
+ {0x483c, 0x0f},
+ {0x484b, 0x05},
+ {0x5000, 0x77},
+ {0x5001, 0x0a},
+ {0x5003, 0xc8},
+ {0x5004, 0x04},
+ {0x5006, 0x00},
+ {0x5007, 0x00},
+ {0x502e, 0x03},
+ {0x5030, 0x41},
+ {0x5795, 0x00},
+ {0x5796, 0x10},
+ {0x5797, 0x10},
+ {0x5798, 0x73},
+ {0x5799, 0x73},
+ {0x579a, 0x00},
+ {0x579b, 0x28},
+ {0x579c, 0x00},
+ {0x579d, 0x16},
+ {0x579e, 0x06},
+ {0x579f, 0x20},
+ {0x57a0, 0x04},
+ {0x57a1, 0xa0},
+ {0x5780, 0x14},
+ {0x5781, 0x0f},
+ {0x5782, 0x44},
+ {0x5783, 0x02},
+ {0x5784, 0x01},
+ {0x5785, 0x01},
+ {0x5786, 0x00},
+ {0x5787, 0x04},
+ {0x5788, 0x02},
+ {0x5789, 0x0f},
+ {0x578a, 0xfd},
+ {0x578b, 0xf5},
+ {0x578c, 0xf5},
+ {0x578d, 0x03},
+ {0x578e, 0x08},
+ {0x578f, 0x0c},
+ {0x5790, 0x08},
+ {0x5791, 0x04},
+ {0x5792, 0x00},
+ {0x5793, 0x52},
+ {0x5794, 0xa3},
+ {0x59f8, 0x3d},
+ {0x5a08, 0x02},
+ {0x5b00, 0x02},
+ {0x5b01, 0x10},
+ {0x5b02, 0x03},
+ {0x5b03, 0xcf},
+ {0x5b05, 0x6c},
+ {0x5e00, 0x00},
+ {0x5e10, 0xfc}
+};
+
static const char * const ov8856_test_pattern_menu[] = {
"Disabled",
"Standard Color Bar",
@@ -548,6 +986,18 @@ static const struct ov8856_mode supported_modes[] = {
.link_freq_index = OV8856_LINK_FREQ_720MBPS,
},
{
+ .width = 3264,
+ .height = 2448,
+ .hts = 1932,
+ .vts_def = 2482,
+ .vts_min = 2482,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mode_3264x2448_regs),
+ .regs = mode_3264x2448_regs,
+ },
+ .link_freq_index = OV8856_LINK_FREQ_720MBPS,
+ },
+ {
.width = 1640,
.height = 1232,
.hts = 3820,
@@ -558,6 +1008,18 @@ static const struct ov8856_mode supported_modes[] = {
.regs = mode_1640x1232_regs,
},
.link_freq_index = OV8856_LINK_FREQ_360MBPS,
+ },
+ {
+ .width = 1632,
+ .height = 1224,
+ .hts = 1932,
+ .vts_def = 2482,
+ .vts_min = 2482,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mode_1632x1224_regs),
+ .regs = mode_1632x1224_regs,
+ },
+ .link_freq_index = OV8856_LINK_FREQ_360MBPS,
}
};
@@ -566,16 +1028,28 @@ struct ov8856 {
struct media_pad pad;
struct v4l2_ctrl_handler ctrl_handler;
+ struct clk *xvclk;
+ struct gpio_desc *n_shutdn_gpio;
+ struct regulator_bulk_data supplies[OV8856_NUM_SUPPLIES];
+
/* V4L2 Controls */
struct v4l2_ctrl *link_freq;
struct v4l2_ctrl *pixel_rate;
struct v4l2_ctrl *vblank;
struct v4l2_ctrl *hblank;
struct v4l2_ctrl *exposure;
+ struct v4l2_mbus_framefmt fmt;
/* Current mode */
const struct ov8856_mode *cur_mode;
+ /* module hardware version that can be read out from register 0x700f
+ * the register value corresponds to different hardware version
+ * 01: 2A module revision
+ * 02: 1B module revision
+ */
+ bool is_1B_revision;
+
/* To serialize asynchronus callbacks */
struct mutex mutex;
@@ -696,6 +1170,25 @@ static int ov8856_test_pattern(struct ov8856 *ov8856, u32 pattern)
OV8856_REG_VALUE_08BIT, pattern);
}
+static int ov8856_check_revision(struct ov8856 *ov8856)
+{
+ int ret;
+
+ ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT,
+ OV8856_REG_VALUE_08BIT, OV8856_MODE_STREAMING);
+ if (ret)
+ return ret;
+
+ ret = ov8856_write_reg(ov8856, OV8856_OTP_MODE_CTRL,
+ OV8856_REG_VALUE_08BIT, OV8856_OTP_MODE_AUTO);
+ if (ret)
+ return ret;
+
+ return ov8856_write_reg(ov8856, OV8856_OTP_LOAD_CTRL,
+ OV8856_REG_VALUE_08BIT,
+ OV8856_OTP_LOAD_CTRL_ENABLE);
+}
+
static int ov8856_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct ov8856 *ov8856 = container_of(ctrl->handler,
@@ -825,7 +1318,6 @@ static void ov8856_update_pad_format(const struct ov8856_mode *mode,
{
fmt->width = mode->width;
fmt->height = mode->height;
- fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
fmt->field = V4L2_FIELD_NONE;
}
@@ -834,6 +1326,7 @@ static int ov8856_start_streaming(struct ov8856 *ov8856)
struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
const struct ov8856_reg_list *reg_list;
int link_freq_index, ret;
+ u32 cur_h_size;
link_freq_index = ov8856->cur_mode->link_freq_index;
reg_list = &link_freq_configs[link_freq_index].reg_list;
@@ -850,6 +1343,28 @@ static int ov8856_start_streaming(struct ov8856 *ov8856)
return ret;
}
+ /* Update R3614 if the revision is 1B module */
+ if (ov8856->is_1B_revision) {
+ ret = ov8856_write_reg(ov8856, OV8856_ANAL_MODE_CTRL,
+ OV8856_REG_VALUE_08BIT,
+ OV8856_ANAL_1B_VAL);
+ if (ret) {
+ dev_err(&client->dev, "failed to set R3614");
+ return ret;
+ }
+ }
+
+ ret = ov8856_read_reg(ov8856, REG_X_ADDR_START,
+ OV8856_REG_VALUE_16BIT, &cur_h_size);
+ if (ret) {
+ dev_err(&client->dev, "failed to read out R3614");
+ return ret;
+ }
+
+ if (cur_h_size == X_OUTPUT_FULL_SIZE ||
+ cur_h_size == X_OUTPUT_BINNING_SIZE)
+ ov8856->fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10;
+
ret = __v4l2_ctrl_handler_setup(ov8856->sd.ctrl_handler);
if (ret)
return ret;
@@ -908,6 +1423,44 @@ static int ov8856_set_stream(struct v4l2_subdev *sd, int enable)
return ret;
}
+static int __ov8856_power_on(struct ov8856 *ov8856)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
+ int ret;
+
+ ret = clk_prepare_enable(ov8856->xvclk);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to enable xvclk\n");
+ return ret;
+ }
+
+ gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
+
+ ret = regulator_bulk_enable(OV8856_NUM_SUPPLIES, ov8856->supplies);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to enable regulators\n");
+ goto disable_clk;
+ }
+
+ gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_HIGH);
+
+ usleep_range(1500, 1800);
+
+ return 0;
+
+disable_clk:
+ clk_disable_unprepare(ov8856->xvclk);
+
+ return ret;
+}
+
+static void __ov8856_power_off(struct ov8856 *ov8856)
+{
+ gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
+ regulator_bulk_disable(OV8856_NUM_SUPPLIES, ov8856->supplies);
+ clk_disable_unprepare(ov8856->xvclk);
+}
+
static int __maybe_unused ov8856_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -951,6 +1504,7 @@ static int ov8856_set_format(struct v4l2_subdev *sd,
struct v4l2_subdev_format *fmt)
{
struct ov8856 *ov8856 = to_ov8856(sd);
+ struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
const struct ov8856_mode *mode;
s32 vblank_def, h_blank;
@@ -960,7 +1514,9 @@ static int ov8856_set_format(struct v4l2_subdev *sd,
fmt->format.height);
mutex_lock(&ov8856->mutex);
- ov8856_update_pad_format(mode, &fmt->format);
+ mbus_fmt->code = ov8856->fmt.code;
+ ov8856_update_pad_format(mode, mbus_fmt);
+ ov8856->fmt = fmt->format;
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
*v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format;
} else {
@@ -992,13 +1548,17 @@ static int ov8856_get_format(struct v4l2_subdev *sd,
struct v4l2_subdev_format *fmt)
{
struct ov8856 *ov8856 = to_ov8856(sd);
+ struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
mutex_lock(&ov8856->mutex);
- if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
fmt->format = *v4l2_subdev_get_try_format(&ov8856->sd, cfg,
fmt->pad);
- else
- ov8856_update_pad_format(ov8856->cur_mode, &fmt->format);
+ } else {
+ fmt->format = ov8856->fmt;
+ ov8856_update_pad_format(ov8856->cur_mode, mbus_fmt);
+ mbus_fmt->code = ov8856->fmt.code;
+ }
mutex_unlock(&ov8856->mutex);
@@ -1009,11 +1569,12 @@ static int ov8856_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_mbus_code_enum *code)
{
- /* Only one bayer order GRBG is supported */
+ struct ov8856 *ov8856 = to_ov8856(sd);
+
if (code->index > 0)
return -EINVAL;
- code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+ code->code = ov8856->fmt.code;
return 0;
}
@@ -1089,6 +1650,20 @@ static int ov8856_identify_module(struct ov8856 *ov8856)
return -ENXIO;
}
+ /* check sensor hardware revision */
+ ret = ov8856_check_revision(ov8856);
+ if (ret) {
+ dev_err(&client->dev, "failed to check sensor revision");
+ return ret;
+ }
+
+ ret = ov8856_read_reg(ov8856, OV8856_MODULE_REVISION,
+ OV8856_REG_VALUE_08BIT, &val);
+ if (ret)
+ return ret;
+
+ ov8856->is_1B_revision = val == OV8856_1B_MODULE;
+
return 0;
}
@@ -1110,7 +1685,7 @@ static int ov8856_check_hwcfg(struct device *dev)
if (ret)
return ret;
- if (mclk != OV8856_MCLK) {
+ if (mclk != OV8856_XVCLK_19_2) {
dev_err(dev, "external clock %d is not supported", mclk);
return -EINVAL;
}
@@ -1167,6 +1742,9 @@ static int ov8856_remove(struct i2c_client *client)
media_entity_cleanup(&sd->entity);
v4l2_ctrl_handler_free(sd->ctrl_handler);
pm_runtime_disable(&client->dev);
+ if (!pm_runtime_status_suspended(&client->dev))
+ __ov8856_power_off(ov8856);
+ pm_runtime_set_suspended(&client->dev);
mutex_destroy(&ov8856->mutex);
return 0;
@@ -1175,6 +1753,7 @@ static int ov8856_remove(struct i2c_client *client)
static int ov8856_probe(struct i2c_client *client)
{
struct ov8856 *ov8856;
+ unsigned int i;
int ret;
ret = ov8856_check_hwcfg(&client->dev);
@@ -1189,6 +1768,42 @@ static int ov8856_probe(struct i2c_client *client)
return -ENOMEM;
v4l2_i2c_subdev_init(&ov8856->sd, client, &ov8856_subdev_ops);
+ ov8856->fmt.code = MEDIA_BUS_FMT_SGRBG10_1X10;
+
+ ov8856->xvclk = devm_clk_get(&client->dev, "xvclk");
+ if (IS_ERR(ov8856->xvclk)) {
+ dev_err(&client->dev, "failed to get xvclk\n");
+ return -EINVAL;
+ }
+
+ ret = clk_set_rate(ov8856->xvclk, OV8856_XVCLK_24);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to set xvclk rate (24MHz)\n");
+ return ret;
+ }
+ if (clk_get_rate(ov8856->xvclk) != OV8856_XVCLK_24)
+ dev_warn(&client->dev,
+ "xvclk mismatched, modes are based on 24MHz\n");
+
+ ov8856->n_shutdn_gpio = devm_gpiod_get(&client->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(ov8856->n_shutdn_gpio)) {
+ dev_err(&client->dev, "failed to get reset-gpios\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < OV8856_NUM_SUPPLIES; i++)
+ ov8856->supplies[i].supply = ov8856_supply_names[i];
+
+ ret = devm_regulator_bulk_get(&client->dev, OV8856_NUM_SUPPLIES,
+ ov8856->supplies);
+ if (ret)
+ dev_warn(&client->dev, "failed to get regulators\n");
+
+ ret = __ov8856_power_on(ov8856);
+ if (ret)
+ dev_warn(&client->dev, "failed to power on\n");
+
ret = ov8856_identify_module(ov8856);
if (ret) {
dev_err(&client->dev, "failed to find sensor: %d", ret);
@@ -1241,8 +1856,29 @@ static int ov8856_probe(struct i2c_client *client)
return ret;
}
+static int __maybe_unused ov8856_runtime_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct ov8856 *ov8856 = to_ov8856(sd);
+
+ return __ov8856_power_on(ov8856);
+}
+
+static int __maybe_unused ov8856_runtime_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct ov8856 *ov8856 = to_ov8856(sd);
+
+ __ov8856_power_off(ov8856);
+
+ return 0;
+}
+
static const struct dev_pm_ops ov8856_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(ov8856_suspend, ov8856_resume)
+ SET_RUNTIME_PM_OPS(ov8856_runtime_suspend, ov8856_runtime_resume, NULL)
};
#ifdef CONFIG_ACPI
@@ -1254,11 +1890,18 @@ static const struct acpi_device_id ov8856_acpi_ids[] = {
MODULE_DEVICE_TABLE(acpi, ov8856_acpi_ids);
#endif
+static const struct of_device_id ov8856_of_match[] = {
+ { .compatible = "ovti,ov8856" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ov8856_of_match);
+
static struct i2c_driver ov8856_i2c_driver = {
.driver = {
.name = "ov8856",
.pm = &ov8856_pm_ops,
.acpi_match_table = ACPI_PTR(ov8856_acpi_ids),
+ .of_match_table = ov8856_of_match,
},
.probe_new = ov8856_probe,
.remove = ov8856_remove,
--
2.9.2
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [V3, 1/2] media: dt-bindings: ov8856: Document YAML bindings
2019-10-31 9:02 ` [V3, 1/2] media: dt-bindings: ov8856: Document YAML bindings Dongchun Zhu
@ 2019-10-31 16:38 ` Rob Herring
0 siblings, 0 replies; 6+ messages in thread
From: Rob Herring @ 2019-10-31 16:38 UTC (permalink / raw)
To: Dongchun Zhu
Cc: Mauro Carvalho Chehab, Andy Shevchenko, Mark Rutland,
Sakari Ailus, Nicolas Boichat, Tomasz Figa, Matthias Brugger,
bingbu.cao, srv_heupstream,
moderated list:ARM/Mediatek SoC support,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Sj Huang, Linux Media Mailing List, devicetree, Louis Kuo,
shengnan.wang
On Thu, Oct 31, 2019 at 4:02 AM Dongchun Zhu <dongchun.zhu@mediatek.com> wrote:
>
> This patch adds documentation of device tree in YAML schema for the
> OV8856 CMOS image sensor.
>
> Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> ---
> .../devicetree/bindings/media/i2c/ov8856.yaml | 126 +++++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 127 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml
Need to test this with 'make dt-binding-check':
warning: no schema found in file:
Documentation/devicetree/bindings/media/i2c/ov8856.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/i2c/ov8856.yaml:
ignoring, error parsing file
Documentation/devicetree/bindings/media/i2c/ov8856.yaml: while
scanning a simple key
in "<unicode string>", line 81, column 5
could not find expected ':'
in "<unicode string>", line 84, column 1
Documentation/devicetree/bindings/Makefile:12: recipe for target
'Documentation/devicetree/bindings/media/i2c/ov8856.example.dts'
failed
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> new file mode 100644
> index 0000000..a161812
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> @@ -0,0 +1,126 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright (c) 2019 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
> +
> +maintainers:
> + - Ben Kao <ben.kao@intel.com>
> + - Dongchun Zhu <dongchun.zhu@mediatek.com>
> +
> +description: |-
> + The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
> + image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
> + sub-sampled, and windowed 10-bit MIPI images in various formats via the
> + Serial Camera Control Bus (SCCB) interface. This chip is programmable
> + through I2C and two-wire SCCB. The sensor output is available via CSI-2
> + serial data output (up to 4-lane).
> +
> +properties:
> + compatible:
> + const: ovti,ov8856
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + description:
> + Input clock for the sensor.
> + items:
> + - const: xvclk
> +
> + clock-frequency:
> + description:
> + Frequency of the xvclk clock in Hertz.
> +
> + dovdd-supply:
> + description:
> + Definition of the regulator used as interface power supply.
> + maxItems: 1
Drop maxItems, it's always a single phandle.
> +
> + avdd-supply:
> + description:
> + Definition of the regulator used as analog power supply.
> + maxItems: 1
> +
> + dvdd-supply:
> + description:
> + Definition of the regulator used as digital power supply.
> + maxItems: 1
> +
> + reset-gpios:
> + description:
> + The phandle and specifier for the GPIO that controls sensor reset.
> + maxItems: 1
> +
> + # See ../video-interfaces.txt for details
> + port:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + remote-endpoint: true
> + data-lanes: true
> + link-frequencies: true
> +
> + required:
> + - remote-endpoint
> + - data-lanes
> + - link-frequencies
> +
> + required
Missing ':' is the cause of the error above.
> + - endpoint
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - clock-frequency
> + - dovdd-supply
> + - avdd-supply
> + - dvdd-supply
> + - reset-gpios
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + ov8856: camera-sensor@10 {
> + compatible = "ovti,ov8856";
> + reg = <0x10>;
> + reset-gpios = <&pio 111 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&clk_24m_cam>;
> +
> + clocks = <&cru SCLK_TESTCLKOUT1>;
> + clock-names = "xvclk";
> + clock-frequency = <19200000>;
> +
> + avdd-supply = <&mt6358_vcama2_reg>;
> + dvdd-supply = <&mt6358_vcamd_reg>;
> + dovdd-supply = <&mt6358_vcamio_reg>;
> +
> + port {
> + wcam_out: endpoint {
> + remote-endpoint = <&mipi_in_wcam>;
> + data-lanes = <1 2 3 4>;
> + link-frequencies = /bits/ 64 <360000000 180000000>;
> + };
> + };
> + };
> +
> +...
> \ No newline at end of file
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 296de2b..4cbae26 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12037,6 +12037,7 @@ L: linux-media@vger.kernel.org
> T: git git://linuxtv.org/media_tree.git
> S: Maintained
> F: drivers/media/i2c/ov8856.c
> +F: Documentation/devicetree/bindings/media/i2c/ov8856.yaml
>
> OMNIVISION OV9650 SENSOR DRIVER
> M: Sakari Ailus <sakari.ailus@linux.intel.com>
> --
> 2.9.2
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [V3, 2/2] media: i2c: ov8856: Add support for more sensor modes
2019-10-31 9:02 ` [V3, 2/2] media: i2c: ov8856: Add support for more sensor modes Dongchun Zhu
@ 2019-10-31 17:04 ` Sakari Ailus
2019-11-25 9:33 ` Pi-Hsun Shih
1 sibling, 0 replies; 6+ messages in thread
From: Sakari Ailus @ 2019-10-31 17:04 UTC (permalink / raw)
To: Dongchun Zhu
Cc: mchehab, andriy.shevchenko, robh+dt, mark.rutland, drinkcat,
tfiga, matthias.bgg, bingbu.cao, srv_heupstream, linux-mediatek,
linux-arm-kernel, sj.huang, linux-media, devicetree, louis.kuo,
shengnan.wang
Hi Dongchun,
On Thu, Oct 31, 2019 at 05:02:13PM +0800, Dongchun Zhu wrote:
> This adds two more sensor modes for Omnivision ov8856 image sensor,
> including the resolution of 1632*1224 and 3264*2448, both with the
> Bayer Order of BGGR.
>
> Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> ---
> drivers/media/i2c/ov8856.c | 661 ++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 652 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
> index 8655842..4815c26 100644
> --- a/drivers/media/i2c/ov8856.c
> +++ b/drivers/media/i2c/ov8856.c
> @@ -3,10 +3,13 @@
>
> #include <asm/unaligned.h>
> #include <linux/acpi.h>
> +#include <linux/clk.h>
> #include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-device.h>
> #include <media/v4l2-fwnode.h>
> @@ -18,10 +21,15 @@
> #define OV8856_LINK_FREQ_360MHZ 360000000ULL
> #define OV8856_LINK_FREQ_180MHZ 180000000ULL
> #define OV8856_SCLK 144000000ULL
> -#define OV8856_MCLK 19200000
> +#define OV8856_XVCLK_19_2 19200000
> +#define OV8856_XVCLK_24 24000000
> #define OV8856_DATA_LANES 4
> #define OV8856_RGB_DEPTH 10
>
> +#define REG_X_ADDR_START 0x3808
> +#define X_OUTPUT_FULL_SIZE 0x0cc0
> +#define X_OUTPUT_BINNING_SIZE 0x0660
> +
> #define OV8856_REG_CHIP_ID 0x300a
> #define OV8856_CHIP_ID 0x00885a
>
> @@ -29,6 +37,22 @@
> #define OV8856_MODE_STANDBY 0x00
> #define OV8856_MODE_STREAMING 0x01
>
> +/* define 1B module revision */
> +#define OV8856_1B_MODULE 0x02
> +
> +/* the OTP read-out buffer is at 0x7000 and 0xf is the offset
> + * of the byte in the OTP that means the module revision
> + */
> +#define OV8856_MODULE_REVISION 0x700f
> +#define OV8856_OTP_MODE_CTRL 0x3d84
> +#define OV8856_OTP_LOAD_CTRL 0x3d81
> +#define OV8856_OTP_MODE_AUTO 0x00
> +#define OV8856_OTP_LOAD_CTRL_ENABLE BIT(0)
> +
> +/* Analog control register that decided by module revision */
> +#define OV8856_ANAL_MODE_CTRL 0x3614
> +#define OV8856_ANAL_1B_VAL 0x20
> +
> /* vertical-timings from sensor */
> #define OV8856_REG_VTS 0x380e
> #define OV8856_VTS_MAX 0x7fff
> @@ -64,6 +88,14 @@
>
> #define to_ov8856(_sd) container_of(_sd, struct ov8856, sd)
>
> +static const char * const ov8856_supply_names[] = {
> + "dovdd", /* Digital I/O power */
> + "avdd", /* Analog power */
> + "dvdd", /* Digital core power */
> +};
> +
> +#define OV8856_NUM_SUPPLIES ARRAY_SIZE(ov8856_supply_names)
> +
> enum {
> OV8856_LINK_FREQ_720MBPS,
> OV8856_LINK_FREQ_360MBPS,
> @@ -316,6 +348,209 @@ static const struct ov8856_reg mode_3280x2464_regs[] = {
> {0x5e00, 0x00}
> };
>
> +static const struct ov8856_reg mode_3264x2448_regs[] = {
The new modes are presumably for either 19,2 or 24 MHz frequency (but which
one?) whereas the old modes were for 19,2 MHz.
This needs to be addressed, preferrably in a separate patch. The modes
should be added in another patch.
> + {0x0103, 0x01},
> + {0x0302, 0x3c},
> + {0x0303, 0x01},
> + {0x031e, 0x0c},
> + {0x3000, 0x20},
> + {0x3003, 0x08},
> + {0x300e, 0x20},
> + {0x3010, 0x00},
> + {0x3015, 0x84},
> + {0x3018, 0x72},
> + {0x3021, 0x23},
> + {0x3033, 0x24},
> + {0x3500, 0x00},
> + {0x3501, 0x9a},
> + {0x3502, 0x20},
> + {0x3503, 0x08},
> + {0x3505, 0x83},
> + {0x3508, 0x01},
> + {0x3509, 0x80},
> + {0x350c, 0x00},
> + {0x350d, 0x80},
> + {0x350e, 0x04},
> + {0x350f, 0x00},
> + {0x3510, 0x00},
> + {0x3511, 0x02},
> + {0x3512, 0x00},
> + {0x3600, 0x72},
> + {0x3601, 0x40},
> + {0x3602, 0x30},
> + {0x3610, 0xc5},
> + {0x3611, 0x58},
> + {0x3612, 0x5c},
> + {0x3613, 0xca},
> + {0x3614, 0x60},
> + {0x3628, 0xff},
> + {0x3629, 0xff},
> + {0x362a, 0xff},
> + {0x3633, 0x10},
> + {0x3634, 0x10},
> + {0x3635, 0x10},
> + {0x3636, 0x10},
> + {0x3663, 0x08},
> + {0x3669, 0x34},
> + {0x366d, 0x00},
> + {0x366e, 0x10},
> + {0x3706, 0x86},
> + {0x370b, 0x7e},
> + {0x3714, 0x23},
> + {0x3730, 0x12},
> + {0x3733, 0x10},
> + {0x3764, 0x00},
> + {0x3765, 0x00},
> + {0x3769, 0x62},
> + {0x376a, 0x2a},
> + {0x376b, 0x30},
> + {0x3780, 0x00},
> + {0x3781, 0x24},
> + {0x3782, 0x00},
> + {0x3783, 0x23},
> + {0x3798, 0x2f},
> + {0x37a1, 0x60},
> + {0x37a8, 0x6a},
> + {0x37ab, 0x3f},
> + {0x37c2, 0x04},
> + {0x37c3, 0xf1},
> + {0x37c9, 0x80},
> + {0x37cb, 0x16},
> + {0x37cc, 0x16},
> + {0x37cd, 0x16},
> + {0x37ce, 0x16},
> + {0x3800, 0x00},
> + {0x3801, 0x00},
> + {0x3802, 0x00},
> + {0x3803, 0x0c},
> + {0x3804, 0x0c},
> + {0x3805, 0xdf},
> + {0x3806, 0x09},
> + {0x3807, 0xa3},
> + {0x3808, 0x0c},
> + {0x3809, 0xc0},
> + {0x380a, 0x09},
> + {0x380b, 0x90},
> + {0x380c, 0x07},
> + {0x380d, 0x8c},
> + {0x380e, 0x09},
> + {0x380f, 0xb2},
> + {0x3810, 0x00},
> + {0x3811, 0x04},
> + {0x3812, 0x00},
> + {0x3813, 0x02},
> + {0x3814, 0x01},
> + {0x3815, 0x01},
> + {0x3816, 0x00},
> + {0x3817, 0x00},
> + {0x3818, 0x00},
> + {0x3819, 0x10},
> + {0x3820, 0x80},
> + {0x3821, 0x46},
> + {0x382a, 0x01},
> + {0x382b, 0x01},
> + {0x3830, 0x06},
> + {0x3836, 0x02},
> + {0x3862, 0x04},
> + {0x3863, 0x08},
> + {0x3cc0, 0x33},
> + {0x3d85, 0x17},
> + {0x3d8c, 0x73},
> + {0x3d8d, 0xde},
> + {0x4001, 0xe0},
> + {0x4003, 0x40},
> + {0x4008, 0x00},
> + {0x4009, 0x0b},
> + {0x400a, 0x00},
> + {0x400b, 0x84},
> + {0x400f, 0x80},
> + {0x4010, 0xf0},
> + {0x4011, 0xff},
> + {0x4012, 0x02},
> + {0x4013, 0x01},
> + {0x4014, 0x01},
> + {0x4015, 0x01},
> + {0x4042, 0x00},
> + {0x4043, 0x80},
> + {0x4044, 0x00},
> + {0x4045, 0x80},
> + {0x4046, 0x00},
> + {0x4047, 0x80},
> + {0x4048, 0x00},
> + {0x4049, 0x80},
> + {0x4041, 0x03},
> + {0x404c, 0x20},
> + {0x404d, 0x00},
> + {0x404e, 0x20},
> + {0x4203, 0x80},
> + {0x4307, 0x30},
> + {0x4317, 0x00},
> + {0x4502, 0x50},
> + {0x4503, 0x08},
> + {0x4601, 0x80},
> + {0x4800, 0x44},
> + {0x4816, 0x53},
> + {0x481b, 0x50},
> + {0x481f, 0x27},
> + {0x4823, 0x3c},
> + {0x482b, 0x00},
> + {0x4831, 0x66},
> + {0x4837, 0x16},
> + {0x483c, 0x0f},
> + {0x484b, 0x05},
> + {0x5000, 0x77},
> + {0x5001, 0x0a},
> + {0x5003, 0xc8},
> + {0x5004, 0x04},
> + {0x5006, 0x00},
> + {0x5007, 0x00},
> + {0x502e, 0x03},
> + {0x5030, 0x41},
> + {0x5780, 0x14},
> + {0x5781, 0x0f},
> + {0x5782, 0x44},
> + {0x5783, 0x02},
> + {0x5784, 0x01},
> + {0x5785, 0x01},
> + {0x5786, 0x00},
> + {0x5787, 0x04},
> + {0x5788, 0x02},
> + {0x5789, 0x0f},
> + {0x578a, 0xfd},
> + {0x578b, 0xf5},
> + {0x578c, 0xf5},
> + {0x578d, 0x03},
> + {0x578e, 0x08},
> + {0x578f, 0x0c},
> + {0x5790, 0x08},
> + {0x5791, 0x04},
> + {0x5792, 0x00},
> + {0x5793, 0x52},
> + {0x5794, 0xa3},
> + {0x5795, 0x02},
> + {0x5796, 0x20},
> + {0x5797, 0x20},
> + {0x5798, 0xd5},
> + {0x5799, 0xd5},
> + {0x579a, 0x00},
> + {0x579b, 0x50},
> + {0x579c, 0x00},
> + {0x579d, 0x2c},
> + {0x579e, 0x0c},
> + {0x579f, 0x40},
> + {0x57a0, 0x09},
> + {0x57a1, 0x40},
> + {0x59f8, 0x3d},
> + {0x5a08, 0x02},
> + {0x5b00, 0x02},
> + {0x5b01, 0x10},
> + {0x5b02, 0x03},
> + {0x5b03, 0xcf},
> + {0x5b05, 0x6c},
> + {0x5e00, 0x00},
> + {0x5e10, 0xfc}
> +};
> +
> static const struct ov8856_reg mode_1640x1232_regs[] = {
> {0x3000, 0x20},
> {0x3003, 0x08},
> @@ -506,6 +741,209 @@ static const struct ov8856_reg mode_1640x1232_regs[] = {
> {0x5e00, 0x00}
> };
>
> +static const struct ov8856_reg mode_1632x1224_regs[] = {
> + {0x0103, 0x01},
> + {0x0302, 0x3c},
> + {0x0303, 0x01},
> + {0x031e, 0x0c},
> + {0x3000, 0x20},
> + {0x3003, 0x08},
> + {0x300e, 0x20},
> + {0x3010, 0x00},
> + {0x3015, 0x84},
> + {0x3018, 0x72},
> + {0x3021, 0x23},
> + {0x3033, 0x24},
> + {0x3500, 0x00},
> + {0x3501, 0x4c},
> + {0x3502, 0xe0},
> + {0x3503, 0x08},
> + {0x3505, 0x83},
> + {0x3508, 0x01},
> + {0x3509, 0x80},
> + {0x350c, 0x00},
> + {0x350d, 0x80},
> + {0x350e, 0x04},
> + {0x350f, 0x00},
> + {0x3510, 0x00},
> + {0x3511, 0x02},
> + {0x3512, 0x00},
> + {0x3600, 0x72},
> + {0x3601, 0x40},
> + {0x3602, 0x30},
> + {0x3610, 0xc5},
> + {0x3611, 0x58},
> + {0x3612, 0x5c},
> + {0x3613, 0xca},
> + {0x3614, 0x60},
> + {0x3628, 0xff},
> + {0x3629, 0xff},
> + {0x362a, 0xff},
> + {0x3633, 0x10},
> + {0x3634, 0x10},
> + {0x3635, 0x10},
> + {0x3636, 0x10},
> + {0x3663, 0x08},
> + {0x3669, 0x34},
> + {0x366d, 0x00},
> + {0x366e, 0x08},
> + {0x3706, 0x86},
> + {0x370b, 0x7e},
> + {0x3714, 0x27},
> + {0x3730, 0x12},
> + {0x3733, 0x10},
> + {0x3764, 0x00},
> + {0x3765, 0x00},
> + {0x3769, 0x62},
> + {0x376a, 0x2a},
> + {0x376b, 0x30},
> + {0x3780, 0x00},
> + {0x3781, 0x24},
> + {0x3782, 0x00},
> + {0x3783, 0x23},
> + {0x3798, 0x2f},
> + {0x37a1, 0x60},
> + {0x37a8, 0x6a},
> + {0x37ab, 0x3f},
> + {0x37c2, 0x14},
> + {0x37c3, 0xf1},
> + {0x37c9, 0x80},
> + {0x37cb, 0x16},
> + {0x37cc, 0x16},
> + {0x37cd, 0x16},
> + {0x37ce, 0x16},
> + {0x3800, 0x00},
> + {0x3801, 0x00},
> + {0x3802, 0x00},
> + {0x3803, 0x0c},
> + {0x3804, 0x0c},
> + {0x3805, 0xdf},
> + {0x3806, 0x09},
> + {0x3807, 0xa3},
> + {0x3808, 0x06},
> + {0x3809, 0x60},
> + {0x380a, 0x04},
> + {0x380b, 0xc8},
> + {0x380c, 0x07},
> + {0x380d, 0x8c},
> + {0x380e, 0x09},
> + {0x380f, 0xb2},
> + {0x3810, 0x00},
> + {0x3811, 0x02},
> + {0x3812, 0x00},
> + {0x3813, 0x02},
> + {0x3814, 0x03},
> + {0x3815, 0x01},
> + {0x3816, 0x00},
> + {0x3817, 0x00},
> + {0x3818, 0x00},
> + {0x3819, 0x10},
> + {0x3820, 0x80},
> + {0x3821, 0x47},
> + {0x382a, 0x03},
> + {0x382b, 0x01},
> + {0x3830, 0x06},
> + {0x3836, 0x02},
> + {0x3862, 0x04},
> + {0x3863, 0x08},
> + {0x3cc0, 0x33},
> + {0x3d85, 0x17},
> + {0x3d8c, 0x73},
> + {0x3d8d, 0xde},
> + {0x4001, 0xe0},
> + {0x4003, 0x40},
> + {0x4008, 0x00},
> + {0x4009, 0x05},
> + {0x400a, 0x00},
> + {0x400b, 0x84},
> + {0x400f, 0x80},
> + {0x4010, 0xf0},
> + {0x4011, 0xff},
> + {0x4012, 0x02},
> + {0x4013, 0x01},
> + {0x4014, 0x01},
> + {0x4015, 0x01},
> + {0x4042, 0x00},
> + {0x4043, 0x80},
> + {0x4044, 0x00},
> + {0x4045, 0x80},
> + {0x4046, 0x00},
> + {0x4047, 0x80},
> + {0x4048, 0x00},
> + {0x4049, 0x80},
> + {0x4041, 0x03},
> + {0x404c, 0x20},
> + {0x404d, 0x00},
> + {0x404e, 0x20},
> + {0x4203, 0x80},
> + {0x4307, 0x30},
> + {0x4317, 0x00},
> + {0x4502, 0x50},
> + {0x4503, 0x08},
> + {0x4601, 0x80},
> + {0x4800, 0x44},
> + {0x4816, 0x53},
> + {0x481b, 0x50},
> + {0x481f, 0x27},
> + {0x4823, 0x3c},
> + {0x482b, 0x00},
> + {0x4831, 0x66},
> + {0x4837, 0x16},
> + {0x483c, 0x0f},
> + {0x484b, 0x05},
> + {0x5000, 0x77},
> + {0x5001, 0x0a},
> + {0x5003, 0xc8},
> + {0x5004, 0x04},
> + {0x5006, 0x00},
> + {0x5007, 0x00},
> + {0x502e, 0x03},
> + {0x5030, 0x41},
> + {0x5795, 0x00},
> + {0x5796, 0x10},
> + {0x5797, 0x10},
> + {0x5798, 0x73},
> + {0x5799, 0x73},
> + {0x579a, 0x00},
> + {0x579b, 0x28},
> + {0x579c, 0x00},
> + {0x579d, 0x16},
> + {0x579e, 0x06},
> + {0x579f, 0x20},
> + {0x57a0, 0x04},
> + {0x57a1, 0xa0},
> + {0x5780, 0x14},
> + {0x5781, 0x0f},
> + {0x5782, 0x44},
> + {0x5783, 0x02},
> + {0x5784, 0x01},
> + {0x5785, 0x01},
> + {0x5786, 0x00},
> + {0x5787, 0x04},
> + {0x5788, 0x02},
> + {0x5789, 0x0f},
> + {0x578a, 0xfd},
> + {0x578b, 0xf5},
> + {0x578c, 0xf5},
> + {0x578d, 0x03},
> + {0x578e, 0x08},
> + {0x578f, 0x0c},
> + {0x5790, 0x08},
> + {0x5791, 0x04},
> + {0x5792, 0x00},
> + {0x5793, 0x52},
> + {0x5794, 0xa3},
> + {0x59f8, 0x3d},
> + {0x5a08, 0x02},
> + {0x5b00, 0x02},
> + {0x5b01, 0x10},
> + {0x5b02, 0x03},
> + {0x5b03, 0xcf},
> + {0x5b05, 0x6c},
> + {0x5e00, 0x00},
> + {0x5e10, 0xfc}
> +};
> +
> static const char * const ov8856_test_pattern_menu[] = {
> "Disabled",
> "Standard Color Bar",
> @@ -548,6 +986,18 @@ static const struct ov8856_mode supported_modes[] = {
> .link_freq_index = OV8856_LINK_FREQ_720MBPS,
> },
> {
> + .width = 3264,
> + .height = 2448,
> + .hts = 1932,
> + .vts_def = 2482,
> + .vts_min = 2482,
> + .reg_list = {
> + .num_of_regs = ARRAY_SIZE(mode_3264x2448_regs),
> + .regs = mode_3264x2448_regs,
> + },
> + .link_freq_index = OV8856_LINK_FREQ_720MBPS,
> + },
> + {
> .width = 1640,
> .height = 1232,
> .hts = 3820,
> @@ -558,6 +1008,18 @@ static const struct ov8856_mode supported_modes[] = {
> .regs = mode_1640x1232_regs,
> },
> .link_freq_index = OV8856_LINK_FREQ_360MBPS,
> + },
> + {
> + .width = 1632,
> + .height = 1224,
> + .hts = 1932,
> + .vts_def = 2482,
> + .vts_min = 2482,
> + .reg_list = {
> + .num_of_regs = ARRAY_SIZE(mode_1632x1224_regs),
> + .regs = mode_1632x1224_regs,
> + },
> + .link_freq_index = OV8856_LINK_FREQ_360MBPS,
> }
> };
>
> @@ -566,16 +1028,28 @@ struct ov8856 {
> struct media_pad pad;
> struct v4l2_ctrl_handler ctrl_handler;
>
> + struct clk *xvclk;
> + struct gpio_desc *n_shutdn_gpio;
> + struct regulator_bulk_data supplies[OV8856_NUM_SUPPLIES];
> +
> /* V4L2 Controls */
> struct v4l2_ctrl *link_freq;
> struct v4l2_ctrl *pixel_rate;
> struct v4l2_ctrl *vblank;
> struct v4l2_ctrl *hblank;
> struct v4l2_ctrl *exposure;
> + struct v4l2_mbus_framefmt fmt;
>
> /* Current mode */
> const struct ov8856_mode *cur_mode;
>
> + /* module hardware version that can be read out from register 0x700f
> + * the register value corresponds to different hardware version
> + * 01: 2A module revision
> + * 02: 1B module revision
> + */
> + bool is_1B_revision;
> +
> /* To serialize asynchronus callbacks */
> struct mutex mutex;
>
> @@ -696,6 +1170,25 @@ static int ov8856_test_pattern(struct ov8856 *ov8856, u32 pattern)
> OV8856_REG_VALUE_08BIT, pattern);
> }
>
> +static int ov8856_check_revision(struct ov8856 *ov8856)
> +{
> + int ret;
> +
> + ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT,
> + OV8856_REG_VALUE_08BIT, OV8856_MODE_STREAMING);
> + if (ret)
> + return ret;
> +
> + ret = ov8856_write_reg(ov8856, OV8856_OTP_MODE_CTRL,
> + OV8856_REG_VALUE_08BIT, OV8856_OTP_MODE_AUTO);
> + if (ret)
> + return ret;
> +
> + return ov8856_write_reg(ov8856, OV8856_OTP_LOAD_CTRL,
> + OV8856_REG_VALUE_08BIT,
> + OV8856_OTP_LOAD_CTRL_ENABLE);
> +}
> +
> static int ov8856_set_ctrl(struct v4l2_ctrl *ctrl)
> {
> struct ov8856 *ov8856 = container_of(ctrl->handler,
> @@ -825,7 +1318,6 @@ static void ov8856_update_pad_format(const struct ov8856_mode *mode,
> {
> fmt->width = mode->width;
> fmt->height = mode->height;
> - fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> fmt->field = V4L2_FIELD_NONE;
> }
>
> @@ -834,6 +1326,7 @@ static int ov8856_start_streaming(struct ov8856 *ov8856)
> struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> const struct ov8856_reg_list *reg_list;
> int link_freq_index, ret;
> + u32 cur_h_size;
>
> link_freq_index = ov8856->cur_mode->link_freq_index;
> reg_list = &link_freq_configs[link_freq_index].reg_list;
> @@ -850,6 +1343,28 @@ static int ov8856_start_streaming(struct ov8856 *ov8856)
> return ret;
> }
>
> + /* Update R3614 if the revision is 1B module */
> + if (ov8856->is_1B_revision) {
> + ret = ov8856_write_reg(ov8856, OV8856_ANAL_MODE_CTRL,
> + OV8856_REG_VALUE_08BIT,
> + OV8856_ANAL_1B_VAL);
> + if (ret) {
> + dev_err(&client->dev, "failed to set R3614");
> + return ret;
> + }
> + }
> +
> + ret = ov8856_read_reg(ov8856, REG_X_ADDR_START,
> + OV8856_REG_VALUE_16BIT, &cur_h_size);
> + if (ret) {
> + dev_err(&client->dev, "failed to read out R3614");
> + return ret;
> + }
> +
> + if (cur_h_size == X_OUTPUT_FULL_SIZE ||
> + cur_h_size == X_OUTPUT_BINNING_SIZE)
> + ov8856->fmt.code = MEDIA_BUS_FMT_SBGGR10_1X10;
> +
> ret = __v4l2_ctrl_handler_setup(ov8856->sd.ctrl_handler);
> if (ret)
> return ret;
> @@ -908,6 +1423,44 @@ static int ov8856_set_stream(struct v4l2_subdev *sd, int enable)
> return ret;
> }
>
> +static int __ov8856_power_on(struct ov8856 *ov8856)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(&ov8856->sd);
> + int ret;
> +
> + ret = clk_prepare_enable(ov8856->xvclk);
> + if (ret < 0) {
> + dev_err(&client->dev, "failed to enable xvclk\n");
> + return ret;
> + }
> +
> + gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
> +
> + ret = regulator_bulk_enable(OV8856_NUM_SUPPLIES, ov8856->supplies);
> + if (ret < 0) {
> + dev_err(&client->dev, "failed to enable regulators\n");
> + goto disable_clk;
> + }
> +
> + gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_HIGH);
> +
> + usleep_range(1500, 1800);
You only need this if ov8856->n_shutdn_gpio is non-NULL.
> +
> + return 0;
> +
> +disable_clk:
> + clk_disable_unprepare(ov8856->xvclk);
> +
> + return ret;
> +}
> +
> +static void __ov8856_power_off(struct ov8856 *ov8856)
> +{
> + gpiod_set_value_cansleep(ov8856->n_shutdn_gpio, GPIOD_OUT_LOW);
> + regulator_bulk_disable(OV8856_NUM_SUPPLIES, ov8856->supplies);
> + clk_disable_unprepare(ov8856->xvclk);
> +}
> +
> static int __maybe_unused ov8856_suspend(struct device *dev)
> {
> struct i2c_client *client = to_i2c_client(dev);
> @@ -951,6 +1504,7 @@ static int ov8856_set_format(struct v4l2_subdev *sd,
> struct v4l2_subdev_format *fmt)
> {
> struct ov8856 *ov8856 = to_ov8856(sd);
> + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
> const struct ov8856_mode *mode;
> s32 vblank_def, h_blank;
>
> @@ -960,7 +1514,9 @@ static int ov8856_set_format(struct v4l2_subdev *sd,
> fmt->format.height);
>
> mutex_lock(&ov8856->mutex);
> - ov8856_update_pad_format(mode, &fmt->format);
> + mbus_fmt->code = ov8856->fmt.code;
Also do add a separate patch for supporting other mbus codes if you need
them.
> + ov8856_update_pad_format(mode, mbus_fmt);
> + ov8856->fmt = fmt->format;
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> *v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format;
> } else {
> @@ -992,13 +1548,17 @@ static int ov8856_get_format(struct v4l2_subdev *sd,
> struct v4l2_subdev_format *fmt)
> {
> struct ov8856 *ov8856 = to_ov8856(sd);
> + struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format;
>
> mutex_lock(&ov8856->mutex);
> - if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
> + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> fmt->format = *v4l2_subdev_get_try_format(&ov8856->sd, cfg,
> fmt->pad);
> - else
> - ov8856_update_pad_format(ov8856->cur_mode, &fmt->format);
> + } else {
> + fmt->format = ov8856->fmt;
> + ov8856_update_pad_format(ov8856->cur_mode, mbus_fmt);
> + mbus_fmt->code = ov8856->fmt.code;
> + }
>
> mutex_unlock(&ov8856->mutex);
>
> @@ -1009,11 +1569,12 @@ static int ov8856_enum_mbus_code(struct v4l2_subdev *sd,
> struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_mbus_code_enum *code)
> {
> - /* Only one bayer order GRBG is supported */
> + struct ov8856 *ov8856 = to_ov8856(sd);
> +
> if (code->index > 0)
> return -EINVAL;
>
> - code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
> + code->code = ov8856->fmt.code;
>
> return 0;
> }
> @@ -1089,6 +1650,20 @@ static int ov8856_identify_module(struct ov8856 *ov8856)
> return -ENXIO;
> }
>
> + /* check sensor hardware revision */
> + ret = ov8856_check_revision(ov8856);
The function is rather enabling reading OTP memory. Also disable streaming
when you're done. This would be ideally a separate patch.
> + if (ret) {
> + dev_err(&client->dev, "failed to check sensor revision");
> + return ret;
> + }
> +
> + ret = ov8856_read_reg(ov8856, OV8856_MODULE_REVISION,
> + OV8856_REG_VALUE_08BIT, &val);
> + if (ret)
> + return ret;
> +
> + ov8856->is_1B_revision = val == OV8856_1B_MODULE;
> +
> return 0;
> }
>
> @@ -1110,7 +1685,7 @@ static int ov8856_check_hwcfg(struct device *dev)
> if (ret)
> return ret;
>
> - if (mclk != OV8856_MCLK) {
> + if (mclk != OV8856_XVCLK_19_2) {
The mclk is the external clock frequency. Both 19,2 and 24 MHz need to work
if you claim to support 24 MHz.
> dev_err(dev, "external clock %d is not supported", mclk);
> return -EINVAL;
> }
> @@ -1167,6 +1742,9 @@ static int ov8856_remove(struct i2c_client *client)
> media_entity_cleanup(&sd->entity);
> v4l2_ctrl_handler_free(sd->ctrl_handler);
> pm_runtime_disable(&client->dev);
> + if (!pm_runtime_status_suspended(&client->dev))
> + __ov8856_power_off(ov8856);
> + pm_runtime_set_suspended(&client->dev);
> mutex_destroy(&ov8856->mutex);
>
> return 0;
> @@ -1175,6 +1753,7 @@ static int ov8856_remove(struct i2c_client *client)
> static int ov8856_probe(struct i2c_client *client)
> {
> struct ov8856 *ov8856;
> + unsigned int i;
> int ret;
>
> ret = ov8856_check_hwcfg(&client->dev);
> @@ -1189,6 +1768,42 @@ static int ov8856_probe(struct i2c_client *client)
> return -ENOMEM;
>
> v4l2_i2c_subdev_init(&ov8856->sd, client, &ov8856_subdev_ops);
> + ov8856->fmt.code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +
> + ov8856->xvclk = devm_clk_get(&client->dev, "xvclk");
> + if (IS_ERR(ov8856->xvclk)) {
> + dev_err(&client->dev, "failed to get xvclk\n");
> + return -EINVAL;
> + }
> +
> + ret = clk_set_rate(ov8856->xvclk, OV8856_XVCLK_24);
Use the specified clock frequency, not 24 MHz.
> + if (ret < 0) {
> + dev_err(&client->dev, "failed to set xvclk rate (24MHz)\n");
> + return ret;
> + }
> + if (clk_get_rate(ov8856->xvclk) != OV8856_XVCLK_24)
> + dev_warn(&client->dev,
> + "xvclk mismatched, modes are based on 24MHz\n");
> +
> + ov8856->n_shutdn_gpio = devm_gpiod_get(&client->dev, "reset",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(ov8856->n_shutdn_gpio)) {
> + dev_err(&client->dev, "failed to get reset-gpios\n");
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < OV8856_NUM_SUPPLIES; i++)
> + ov8856->supplies[i].supply = ov8856_supply_names[i];
> +
> + ret = devm_regulator_bulk_get(&client->dev, OV8856_NUM_SUPPLIES,
> + ov8856->supplies);
> + if (ret)
> + dev_warn(&client->dev, "failed to get regulators\n");
> +
> + ret = __ov8856_power_on(ov8856);
> + if (ret)
> + dev_warn(&client->dev, "failed to power on\n");
> +
> ret = ov8856_identify_module(ov8856);
> if (ret) {
> dev_err(&client->dev, "failed to find sensor: %d", ret);
> @@ -1241,8 +1856,29 @@ static int ov8856_probe(struct i2c_client *client)
> return ret;
> }
>
> +static int __maybe_unused ov8856_runtime_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct ov8856 *ov8856 = to_ov8856(sd);
> +
> + return __ov8856_power_on(ov8856);
> +}
> +
> +static int __maybe_unused ov8856_runtime_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct ov8856 *ov8856 = to_ov8856(sd);
> +
> + __ov8856_power_off(ov8856);
Please merge this function with the caller. The same for
ov8856_runtime_resume().
> +
> + return 0;
> +}
> +
> static const struct dev_pm_ops ov8856_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(ov8856_suspend, ov8856_resume)
> + SET_RUNTIME_PM_OPS(ov8856_runtime_suspend, ov8856_runtime_resume, NULL)
> };
>
> #ifdef CONFIG_ACPI
> @@ -1254,11 +1890,18 @@ static const struct acpi_device_id ov8856_acpi_ids[] = {
> MODULE_DEVICE_TABLE(acpi, ov8856_acpi_ids);
> #endif
>
> +static const struct of_device_id ov8856_of_match[] = {
> + { .compatible = "ovti,ov8856" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, ov8856_of_match);
> +
> static struct i2c_driver ov8856_i2c_driver = {
> .driver = {
> .name = "ov8856",
> .pm = &ov8856_pm_ops,
> .acpi_match_table = ACPI_PTR(ov8856_acpi_ids),
> + .of_match_table = ov8856_of_match,
> },
> .probe_new = ov8856_probe,
> .remove = ov8856_remove,
--
Regards,
Sakari Ailus
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [V3, 2/2] media: i2c: ov8856: Add support for more sensor modes
2019-10-31 9:02 ` [V3, 2/2] media: i2c: ov8856: Add support for more sensor modes Dongchun Zhu
2019-10-31 17:04 ` Sakari Ailus
@ 2019-11-25 9:33 ` Pi-Hsun Shih
1 sibling, 0 replies; 6+ messages in thread
From: Pi-Hsun Shih @ 2019-11-25 9:33 UTC (permalink / raw)
To: Dongchun Zhu
Cc: Mauro Carvalho Chehab, andriy.shevchenko, Rob Herring,
Mark Rutland, sakari.ailus, Nicolas Boichat, Tomasz Figa,
Matthias Brugger, bingbu.cao,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
srv_heupstream, shengnan.wang,
Sj Huang (黃信璋),
moderated list:ARM/Mediatek SoC support, louis.kuo,
moderated list:ARM/Mediatek SoC support,
open list:MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
Hi Dongchun,
On Thu, Oct 31, 2019 at 5:12 PM Dongchun Zhu <dongchun.zhu@mediatek.com> wrote:
>
> This adds two more sensor modes for Omnivision ov8856 image sensor,
> including the resolution of 1632*1224 and 3264*2448, both with the
> Bayer Order of BGGR.
>
> Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
> ---
> drivers/media/i2c/ov8856.c | 661 ++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 652 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
> index 8655842..4815c26 100644
> --- a/drivers/media/i2c/ov8856.c
> +++ b/drivers/media/i2c/ov8856.c
> @@ -3,10 +3,13 @@
> [...]
> @@ -1189,6 +1768,42 @@ static int ov8856_probe(struct i2c_client *client)
> return -ENOMEM;
>
> v4l2_i2c_subdev_init(&ov8856->sd, client, &ov8856_subdev_ops);
> + ov8856->fmt.code = MEDIA_BUS_FMT_SGRBG10_1X10;
> +
> + ov8856->xvclk = devm_clk_get(&client->dev, "xvclk");
> + if (IS_ERR(ov8856->xvclk)) {
> + dev_err(&client->dev, "failed to get xvclk\n");
> + return -EINVAL;
> + }
> +
> + ret = clk_set_rate(ov8856->xvclk, OV8856_XVCLK_24);
> + if (ret < 0) {
> + dev_err(&client->dev, "failed to set xvclk rate (24MHz)\n");
> + return ret;
> + }
> + if (clk_get_rate(ov8856->xvclk) != OV8856_XVCLK_24)
> + dev_warn(&client->dev,
> + "xvclk mismatched, modes are based on 24MHz\n");
> +
> + ov8856->n_shutdn_gpio = devm_gpiod_get(&client->dev, "reset",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(ov8856->n_shutdn_gpio)) {
> + dev_err(&client->dev, "failed to get reset-gpios\n");
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < OV8856_NUM_SUPPLIES; i++)
> + ov8856->supplies[i].supply = ov8856_supply_names[i];
> +
> + ret = devm_regulator_bulk_get(&client->dev, OV8856_NUM_SUPPLIES,
> + ov8856->supplies);
> + if (ret)
> + dev_warn(&client->dev, "failed to get regulators\n");
> +
> + ret = __ov8856_power_on(ov8856);
> + if (ret)
> + dev_warn(&client->dev, "failed to power on\n");
> +
__ov8856_power_off is missing on the error path after the __ov8856_power_on.
> ret = ov8856_identify_module(ov8856);
> if (ret) {
> dev_err(&client->dev, "failed to find sensor: %d", ret);
> @@ -1241,8 +1856,29 @@ static int ov8856_probe(struct i2c_client *client)
> return ret;
> }
>
> [...]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-11-25 9:34 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-31 9:02 [V3, 0/2] media: ov8856: Add YAML binding and sensor mode support Dongchun Zhu
2019-10-31 9:02 ` [V3, 1/2] media: dt-bindings: ov8856: Document YAML bindings Dongchun Zhu
2019-10-31 16:38 ` Rob Herring
2019-10-31 9:02 ` [V3, 2/2] media: i2c: ov8856: Add support for more sensor modes Dongchun Zhu
2019-10-31 17:04 ` Sakari Ailus
2019-11-25 9:33 ` Pi-Hsun Shih
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).