From: Rob Herring <robh@kernel.org>
To: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: vkoul@kernel.org, nm@ti.com, ssantosh@kernel.org,
dan.j.williams@intel.com, dmaengine@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, grygorii.strashko@ti.com,
lokeshvutla@ti.com, t-kristo@ti.com, tony@atomide.com,
j-keerthy@ti.com
Subject: Re: [PATCH v4 08/15] dt-bindings: dma: ti: Add document for K3 UDMA
Date: Mon, 4 Nov 2019 20:19:00 -0600 [thread overview]
Message-ID: <20191105021900.GA17829@bogus> (raw)
In-Reply-To: <20191101084135.14811-9-peter.ujfalusi@ti.com>
On Fri, Nov 01, 2019 at 10:41:28AM +0200, Peter Ujfalusi wrote:
> New binding document for
> Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P).
>
> UDMA-P is introduced as part of the K3 architecture and can be found in
> AM654 and j721e.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
> Rob,
>
> can you give me some hint on how to fix these two warnings from dt_binding_check:
>
> DTC Documentation/devicetree/bindings/dma/ti/k3-udma.example.dt.yaml
> Documentation/devicetree/bindings/dma/ti/k3-udma.example.dts:23.13-72: Warning (ranges_format): /example-0/interconnect@30800000:ranges: "ranges" property has invalid length (24 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 2)
> CHECK Documentation/devicetree/bindings/dma/ti/k3-udma.example.dt.yaml
The default #address-cells is 1 for examples. So you need to
either override it or change ranges parent address size.
>
> Documentation/devicetree/bindings/dma/ti/k3-udma.example.dt.yaml: interconnect@30800000: $nodename:0: 'interconnect@30800000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Use 'bus' for the node name of 'simple-bus'.
>
> Thanks,
> Peter
>
> .../devicetree/bindings/dma/ti/k3-udma.yaml | 190 ++++++++++++++++++
> 1 file changed, 190 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
>
> diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
> new file mode 100644
> index 000000000000..e00fe3b2364e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
> @@ -0,0 +1,190 @@
> +# SPDX-License-Identifier: GPL-2.0
Dual license new bindings:
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/ti/k3-udma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments K3 NAVSS Unified DMA Device Tree Bindings
> +
> +maintainers:
> + - Peter Ujfalusi <peter.ujfalusi@ti.com>
> +
> +description: |
> + The UDMA-P is intended to perform similar (but significantly upgraded)
> + functions as the packet-oriented DMA used on previous SoC devices. The UDMA-P
> + module supports the transmission and reception of various packet types.
> + The UDMA-P is architected to facilitate the segmentation and reassembly of
> + SoC DMA data structure compliant packets to/from smaller data blocks that are
> + natively compatible with the specific requirements of each connected
> + peripheral.
> + Multiple Tx and Rx channels are provided within the DMA which allow multiple
> + segmentation or reassembly operations to be ongoing. The DMA controller
> + maintains state information for each of the channels which allows packet
> + segmentation and reassembly operations to be time division multiplexed between
> + channels in order to share the underlying DMA hardware. An external DMA
> + scheduler is used to control the ordering and rate at which this multiplexing
> + occurs for Transmit operations. The ordering and rate of Receive operations
> + is indirectly controlled by the order in which blocks are pushed into the DMA
> + on the Rx PSI-L interface.
> +
> + The UDMA-P also supports acting as both a UTC and UDMA-C for its internal
> + channels. Channels in the UDMA-P can be configured to be either Packet-Based
> + or Third-Party channels on a channel by channel basis.
> +
> + All transfers within NAVSS is done between PSI-L source and destination
> + threads.
> + The peripherals serviced by UDMA can be PSI-L native (sa2ul, cpsw, etc) or
> + legacy, non PSI-L native peripherals. In the later case a special, small PDMA
> + is tasked to act as a bridge between the PSI-L fabric and the legacy
> + peripheral.
> +
> + PDMAs can be configured via UDMAP peer registers to match with the
> + configuration of the legacy peripheral.
> +
> +allOf:
> + - $ref: "../dma-controller.yaml#"
> +
> +properties:
> + "#dma-cells":
> + const: 1
> + description: |
> + The cell is the PSI-L thread ID of the remote (to UDMAP) end.
> + Valid ranges for thread ID depends on the data movement direction:
> + for source thread IDs (rx): 0 - 0x7fff
> + for destination thread IDs (tx): 0x8000 - 0xffff
> +
> + PLease refer to the device documentation for the PSI-L thread map and also
> + the PSI-L peripheral chapter for the correct thread ID.
> +
> + compatible:
> + oneOf:
> + - const: ti,am654-navss-main-udmap
> + - const: ti,am654-navss-mcu-udmap
> + - const: ti,j721e-navss-main-udmap
> + - const: ti,j721e-navss-mcu-udmap
enum works better than oneOf+const. Better error messages.
> +
> + reg:
> + maxItems: 3
> +
> + reg-names:
> + items:
> + - const: gcfg
> + - const: rchanrt
> + - const: tchanrt
> +
> + msi-parent: true
> +
> + ti,sci:
> + description: |
Doesn't need to be a literal block (can drop the '|').
> + phandle to TI-SCI compatible System controller node
> + maxItems: 1
Drop this, not an array.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/phandle
> +
> + ti,sci-dev-id:
> + description: |
> + TI-SCI device id of UDMAP
> + maxItems: 1
Drop this.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> +
> + ti,ringacc:
> + description: |
> + phandle to the ring accelerator node
> + maxItems: 1
Drop this.
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/phandle
> +
> + ti,sci-rm-range-tchan:
> + description: |
> + Array of UDMA tchan resource subtypes for resource allocation for this
> + host
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> + items:
> + minItems: 1
> + # Should be enough
> + maxItems: 255
These should not be under 'items'. Drop 'items'.
Any constraints on the values of the array elements?
> +
> + ti,sci-rm-range-rchan:
> + description: |
> + Array of UDMA rchan resource subtypes for resource allocation for this
> + host
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> + items:
> + minItems: 1
> + # Should be enough
> + maxItems: 255
Same here.
> +
> + ti,sci-rm-range-rflow:
> + description: |
> + Array of UDMA rflow resource subtypes for resource allocation for this
> + host
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> + items:
> + minItems: 1
> + # Should be enough
> + maxItems: 255
And here.
> +
> +required:
> + - compatible
> + - "#dma-cells"
> + - reg
> + - reg-names
> + - msi-parent
> + - ti,sci
> + - ti,sci-dev-id
> + - ti,ringacc
> + - ti,sci-rm-range-tchan
> + - ti,sci-rm-range-rchan
> + - ti,sci-rm-range-rflow
> +
> +examples:
> + - |+
> + cbass_main_navss: interconnect@30800000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + dma-coherent;
> + dma-ranges;
> + ranges = <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>;
> +
> + ti,sci-dev-id = <118>;
> +
> + main_udmap: dma-controller@31150000 {
> + compatible = "ti,am654-navss-main-udmap";
> + reg = <0x0 0x31150000 0x0 0x100>,
> + <0x0 0x34000000 0x0 0x100000>,
> + <0x0 0x35000000 0x0 0x100000>;
> + reg-names = "gcfg", "rchanrt", "tchanrt";
> + #dma-cells = <1>;
> +
> + ti,ringacc = <&ringacc>;
> +
> + msi-parent = <&inta_main_udmass>;
> +
> + ti,sci = <&dmsc>;
> + ti,sci-dev-id = <188>;
> +
> + ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
> + <0x2>; /* TX_CHAN */
> + ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */
> + <0x5>; /* RX_CHAN */
> + ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
> + };
> + };
> +
> + mcasp0: mcasp@02B00000 {
> + dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
> + dma-names = "tx", "rx";
> + };
> +
> + crypto: crypto@4E00000 {
> + compatible = "ti,sa2ul-crypto";
> +
> + dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>;
> + dma-names = "tx", "rx1", "rx2";
> + };
> +
> --
> Peter
>
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
next prev parent reply other threads:[~2019-11-05 2:19 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-01 8:41 [PATCH v4 00/15] dmaengine/soc: Add Texas Instruments UDMA support Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 01/15] bindings: soc: ti: add documentation for k3 ringacc Peter Ujfalusi
2019-11-11 4:07 ` Vinod Koul
2019-11-11 7:24 ` Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 02/15] soc: ti: k3: add navss ringacc driver Peter Ujfalusi
2019-11-11 4:21 ` Vinod Koul
2019-11-11 7:39 ` Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 03/15] dmaengine: doc: Add sections for per descriptor metadata support Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 04/15] dmaengine: Add metadata_ops for dma_async_tx_descriptor Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 05/15] dmaengine: Add support for reporting DMA cached data amount Peter Ujfalusi
2019-11-11 4:39 ` Vinod Koul
2019-11-11 8:00 ` Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 06/15] dmaengine: ti: Add cppi5 header for K3 NAVSS/UDMA Peter Ujfalusi
2019-11-05 7:40 ` Tero Kristo
2019-11-01 8:41 ` [PATCH v4 07/15] dmaengine: ti: k3 PSI-L remote endpoint configuration Peter Ujfalusi
2019-11-05 7:49 ` Tero Kristo
2019-11-05 8:13 ` Peter Ujfalusi
2019-11-05 10:00 ` Grygorii Strashko
2019-11-05 10:27 ` Peter Ujfalusi
2019-11-05 11:25 ` Grygorii Strashko
2019-11-11 4:47 ` Vinod Koul
2019-11-11 8:47 ` Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 08/15] dt-bindings: dma: ti: Add document for K3 UDMA Peter Ujfalusi
2019-11-05 2:19 ` Rob Herring [this message]
2019-11-05 10:08 ` Peter Ujfalusi
2019-11-14 17:53 ` Rob Herring
2019-11-15 9:45 ` Peter Ujfalusi
2019-11-26 8:29 ` Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 09/15] dmaengine: ti: New driver for K3 UDMA - split#1: defines, structs, io func Peter Ujfalusi
2019-11-11 5:28 ` Vinod Koul
2019-11-11 8:33 ` Peter Ujfalusi
2019-11-11 9:00 ` Vinod Koul
2019-11-11 9:12 ` Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 10/15] dmaengine: ti: New driver for K3 UDMA - split#2: probe/remove, xlate and filter_fn Peter Ujfalusi
2019-11-11 5:33 ` Vinod Koul
2019-11-11 9:16 ` Peter Ujfalusi
2019-11-12 5:34 ` Vinod Koul
2019-11-12 7:22 ` Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 11/15] dmaengine: ti: New driver for K3 UDMA - split#3: alloc/free chan_resources Peter Ujfalusi
2019-11-11 6:06 ` Vinod Koul
2019-11-11 9:40 ` Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 12/15] dmaengine: ti: New driver for K3 UDMA - split#4: dma_device callbacks 1 Peter Ujfalusi
2019-11-11 6:09 ` Vinod Koul
2019-11-11 10:29 ` Peter Ujfalusi
2019-11-12 5:36 ` Vinod Koul
2019-11-12 7:24 ` Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 13/15] dmaengine: ti: New driver for K3 UDMA - split#5: dma_device callbacks 2 Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 14/15] dmaengine: ti: New driver for K3 UDMA - split#6: Kconfig and Makefile Peter Ujfalusi
2019-11-11 6:11 ` Vinod Koul
2019-11-11 10:30 ` Peter Ujfalusi
2019-11-01 8:41 ` [PATCH v4 15/15] dmaengine: ti: k3-udma: Add glue layer for non DMAengine users Peter Ujfalusi
2019-11-11 6:12 ` Vinod Koul
2019-11-11 10:31 ` Peter Ujfalusi
2019-11-12 5:37 ` Vinod Koul
2019-11-12 7:25 ` Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191105021900.GA17829@bogus \
--to=robh@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=nm@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=ssantosh@kernel.org \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).