[PATCH AUTOSEL 4.19 009/191] ARM: dts: xilinx: Fix I2C and SPI bus warnings

[PATCH AUTOSEL 4.19 009/191] ARM: dts: xilinx: Fix I2C and SPI bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit f5054ceed420b1f38d37920a4c65446fcc5d6b90 ]

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@52: I2C bus unit address format error, expected "34"
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@53: I2C bus unit address format error, expected "35"
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@e0004000/i2c-mux@74/i2c@7/hwmon@54: I2C bus unit address format error, expected "36"
arch/arm/boot/dts/zynq-zc770-xm013.dtb: Warning (spi_bus_reg): /amba/spi@e0006000/eeprom@0: SPI bus unit address format error, expected "2"
arch/arm/boot/dts/zynq-zc770-xm010.dtb: Warning (spi_bus_reg): /amba/spi@e0007000/flash@0: SPI bus unit address format error, expected "1"

Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/zynq-zc702.dts       | 12 ++++++------
 arch/arm/boot/dts/zynq-zc770-xm010.dts |  2 +-
 arch/arm/boot/dts/zynq-zc770-xm013.dts |  2 +-
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cc5a3dc2b4a08..27cd6cb52f1ba 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -174,17 +174,17 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
-			hwmon@52 {
+			hwmon@34 {
 				compatible = "ti,ucd9248";
-				reg = <52>;
+				reg = <0x34>;
 			};
-			hwmon@53 {
+			hwmon@35 {
 				compatible = "ti,ucd9248";
-				reg = <53>;
+				reg = <0x35>;
 			};
-			hwmon@54 {
+			hwmon@36 {
 				compatible = "ti,ucd9248";
-				reg = <54>;
+				reg = <0x36>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
index 0e1bfdd3421ff..0dd352289a45e 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
@@ -68,7 +68,7 @@
 	status = "okay";
 	num-cs = <4>;
 	is-decoded-cs = <0>;
-	flash@0 {
+	flash@1 {
 		compatible = "sst25wf080", "jedec,spi-nor";
 		reg = <1>;
 		spi-max-frequency = <1000000>;
diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
index 651913f1afa2a..4ae2c85df3a00 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
@@ -62,7 +62,7 @@
 	status = "okay";
 	num-cs = <4>;
 	is-decoded-cs = <0>;
-	eeprom: eeprom@0 {
+	eeprom: eeprom@2 {
 		at25,byte-len = <8192>;
 		at25,addr-mode = <2>;
 		at25,page-size = <32>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 014/191] arm64: dts: ti: k3-am65: Change #address-cells and #size-cells of interconnect to 2

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit 3bc1572068e3896b60d86f9c0fb56d1cef28201c ]

AM65 has two PCIe controllers and each PCIe controller has '2' address
spaces one within the 4GB address space of the SoC and the other above
the 4GB address space of the SoC (cbass_main) in addition to the
register space. The size of the address space above the 4GB SoC address
space is 4GB. These address ranges will be used by CPU/DMA to access
the PCIe address space. In order to represent the address space above
the 4GB SoC address space and to represent the size of this address
space as 4GB, change address-cells and size-cells of interconnect to 2.

Since OSPI has similar need in MCU Domain Memory Map, change
address-cells and size-cells of cbass_mcu interconnect also to 2.

Fixes: ea47eed33a3fe3d919 ("arm64: dts: ti: Add Support for AM654 SoC")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vignesh R <vigneshr@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 10 +++---
 arch/arm64/boot/dts/ti/k3-am65.dtsi      | 44 ++++++++++++------------
 2 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 2409344df4fa2..faace3805c014 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -8,13 +8,13 @@
 &cbass_main {
 	gic500: interrupt-controller@1800000 {
 		compatible = "arm,gic-v3";
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x01800000 0x10000>,	/* GICD */
-		      <0x01880000 0x90000>;	/* GICR */
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0x90000>;	/* GICR */
 		/*
 		 * vcpumntirq:
 		 * virtual CPU interface maintenance interrupt
@@ -23,7 +23,7 @@
 
 		gic_its: gic-its@18200000 {
 			compatible = "arm,gic-v3-its";
-			reg = <0x01820000 0x10000>;
+			reg = <0x00 0x01820000 0x00 0x10000>;
 			msi-controller;
 			#msi-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index cede1fa0983c9..ded364d208351 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -46,38 +46,38 @@
 
 	cbass_main: interconnect@100000 {
 		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */
-			 <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */
-			 <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */
-			 <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */
-			 <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+			 <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
 			 /* MCUSS Range */
-			 <0x28380000 0x00 0x28380000 0x03880000>,
-			 <0x40200000 0x00 0x40200000 0x00900100>,
-			 <0x42040000 0x00 0x42040000 0x03ac2400>,
-			 <0x45100000 0x00 0x45100000 0x00c24000>,
-			 <0x46000000 0x00 0x46000000 0x00200000>,
-			 <0x47000000 0x00 0x47000000 0x00068400>;
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>;
 
 		cbass_mcu: interconnect@28380000 {
 			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/
-				 <0x40200000 0x40200000 0x00900100>, /* First peripheral window */
-				 <0x42040000 0x42040000 0x03ac2400>, /* WKUP */
-				 <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */
-				 <0x46000000 0x46000000 0x00200000>, /* CPSW */
-				 <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */
 
 			cbass_wakeup: interconnect@42040000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				/* WKUP  Basic peripherals */
-				ranges = <0x42040000 0x42040000 0x03ac2400>;
+				ranges = <0x42040000 0x00 0x42040000 0x03ac2400>;
 			};
 		};
 	};
-- 
2.20.1

[PATCH AUTOSEL 4.19 033/191] ARM: dts: atmel: Fix I2C and SPI bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit c890ecdbe93d482512a911b299bfb009780a29c2 ]

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f0018000/eeprom@87: I2C bus unit address format error, expected "57"
arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f0018000/ft5426@56: I2C bus unit address format error, expected "38"
arch/arm/boot/dts/at91-vinco.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@f8024000/rtc@64: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/at91sam9260ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9g20ek_2mmc.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9g20ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9261ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@fffc8000/tsc2046@0: SPI bus unit address format error, expected "2"

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/at91-dvk_su60_somc.dtsi     | 4 ++--
 arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi | 4 ++--
 arch/arm/boot/dts/at91-vinco.dts              | 2 +-
 arch/arm/boot/dts/at91sam9260ek.dts           | 2 +-
 arch/arm/boot/dts/at91sam9261ek.dts           | 2 +-
 arch/arm/boot/dts/at91sam9g20ek_common.dtsi   | 2 +-
 6 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
index bb86f17ed5ed1..21876da7c4425 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
@@ -70,9 +70,9 @@
 &i2c1 {
 	status = "okay";
 
-	eeprom@87 {
+	eeprom@57 {
 		compatible = "giantec,gt24c32a", "atmel,24c32";
-		reg = <87>;
+		reg = <0x57>;
 		pagesize = <32>;
 	};
 };
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
index 4b9176dc5d029..df0f0cc575c18 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
@@ -59,9 +59,9 @@
 &i2c1 {
 	status = "okay";
 
-	ft5426@56 {
+	ft5426@38 {
 		compatible = "focaltech,ft5426", "edt,edt-ft5406";
-		reg = <56>;
+		reg = <0x38>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_lcd_ctp_int>;
 
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
index 1be9889a2b3a1..430277291e025 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -128,7 +128,7 @@
 			i2c2: i2c@f8024000 {
 				status = "okay";
 
-				rtc1: rtc@64 {
+				rtc1: rtc@32 {
 					compatible = "epson,rx8900";
 					reg = <0x32>;
 				};
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
index d2b865f602932..07d1b571e6017 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -127,7 +127,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@0 {
+				mtd_dataflash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index a29fc04940762..a57f2d435dcae 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -160,7 +160,7 @@
 					spi-max-frequency = <15000000>;
 				};
 
-				tsc2046@0 {
+				tsc2046@2 {
 					reg = <2>;
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 71df3adfc7ca1..ec1f17ab6753b 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -109,7 +109,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@0 {
+				mtd_dataflash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 035/191] of/unittest: Fix I2C bus unit-address error

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 62287dce5d0ee207b6a09a0a1abd06b61cee1094 ]

dtc has new checks for I2C buses. Fix the warnings in unit-addresses in
the unittests.

drivers/of/unittest-data/testcases.dtb: Warning (i2c_bus_reg): /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest14/i2c@0/test-mux-dev: I2C bus unit address format error, expected "20"
drivers/of/unittest-data/overlay_15.dtb: Warning (i2c_bus_reg): /fragment@0/__overlay__/test-unittest15/i2c@0/test-mux-dev: I2C bus unit address format error, expected "20"

Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/unittest-data/overlay_15.dts     | 4 ++--
 drivers/of/unittest-data/tests-overlay.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/of/unittest-data/overlay_15.dts b/drivers/of/unittest-data/overlay_15.dts
index b98f2514df4b3..5728490474f6b 100644
--- a/drivers/of/unittest-data/overlay_15.dts
+++ b/drivers/of/unittest-data/overlay_15.dts
@@ -20,8 +20,8 @@
 			#size-cells = <0>;
 			reg = <0>;
 
-			test-mux-dev {
-				reg = <32>;
+			test-mux-dev@20 {
+				reg = <0x20>;
 				compatible = "unittest-i2c-dev";
 				status = "okay";
 			};
diff --git a/drivers/of/unittest-data/tests-overlay.dtsi b/drivers/of/unittest-data/tests-overlay.dtsi
index 25cf397b8f6b6..4ea024d908ee2 100644
--- a/drivers/of/unittest-data/tests-overlay.dtsi
+++ b/drivers/of/unittest-data/tests-overlay.dtsi
@@ -103,8 +103,8 @@
 							#size-cells = <0>;
 							reg = <0>;
 
-							test-mux-dev {
-								reg = <32>;
+							test-mux-dev@20 {
+								reg = <0x20>;
 								compatible = "unittest-i2c-dev";
 								status = "okay";
 							};
-- 
2.20.1

[PATCH AUTOSEL 4.19 062/191] ARM: dts: am335x-evm: fix number of cpsw

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit dcbf6b18d81bcdc51390ca1b258c17e2e13b7d0c ]

am335x-evm has only one CPSW external port physically wired, but DT defines
2 ext. ports. As result, PHY connection failure reported for the second
ext. port.

Update DT to reflect am335x-evm board HW configuration, and, while here,
switch to use phy-handle instead of phy_id.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am335x-evm.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 20bbb899b3b76..cc59e42c91342 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -731,6 +731,7 @@
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
+	slaves = <1>;
 };
 
 &davinci_mdio {
@@ -738,15 +739,14 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
-};
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 063/191] ARM: dts: ti: Fix SPI and I2C bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit cc893871f092be9ac1184a78f9ae1e76b85d5317 ]

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm/boot/dts/am437x-idk-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am437x-sk-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am43x-epos-evm.dtb: Warning (spi_bus_bridge): /ocp@44000000/qspi@47900000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/omap3-n9.dtb: Warning (i2c_bus_reg): /ocp@68000000/i2c@48060000/ak8975@0f: I2C bus unit address format error, expected "f"
arch/arm/boot/dts/am335x-osd3358-sm-red.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/pressure@78: I2C bus unit address format error, expected "76"
arch/arm/boot/dts/am335x-boneblack.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70"
arch/arm/boot/dts/am335x-boneblack-wireless.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70"
arch/arm/boot/dts/am335x-sancloud-bbe.dtb: Warning (i2c_bus_reg): /ocp/i2c@44e0b000/tda19988: I2C bus unit address format error, expected "70"
arch/arm/boot/dts/am571x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am572x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am574x-idk.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am57xx-cl-som-am57x.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am57xx-sbc-am57x.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dra72-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dra72-evm-revc.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dra76-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dra7-evm.dtb: Warning (spi_bus_bridge): /ocp/qspi@4b300000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/am335x-pdu001.dtb: Warning (spi_bus_reg): /ocp/spi@481a0000/cfaf240320a032t: SPI bus unit address format error, expected "0"
arch/arm/boot/dts/keystone-k2g-evm.dtb: Warning (spi_bus_bridge): /soc@0/qspi@2940000: node name for SPI buses should be 'spi'
arch/arm/boot/dts/keystone-k2g-ice.dtb: Warning (spi_bus_bridge): /soc@0/qspi@2940000: node name for SPI buses should be 'spi'

Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
[tony@atomide.com: fixed mode to 644 for am335x-osd3358-sm-red.dts while at it]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am335x-boneblack-common.dtsi | 2 +-
 arch/arm/boot/dts/am335x-osd3358-sm-red.dts    | 2 +-
 arch/arm/boot/dts/am335x-pdu001.dts            | 2 +-
 arch/arm/boot/dts/am4372.dtsi                  | 2 +-
 arch/arm/boot/dts/am57xx-cl-som-am57x.dts      | 2 +-
 arch/arm/boot/dts/dra7.dtsi                    | 2 +-
 arch/arm/boot/dts/keystone-k2g.dtsi            | 2 +-
 arch/arm/boot/dts/omap2.dtsi                   | 4 ++--
 arch/arm/boot/dts/omap2430.dtsi                | 2 +-
 arch/arm/boot/dts/omap3-n9.dts                 | 2 +-
 10 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
index 325daae40278a..21bc1173fa6b9 100644
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -88,7 +88,7 @@
 };
 
 &i2c0 {
-	tda19988: tda19988 {
+	tda19988: tda19988@70 {
 		compatible = "nxp,tda998x";
 		reg = <0x70>;
 
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index 4d969013f99a6..d9e92671055bd 100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -161,7 +161,7 @@
 		invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
 	};
 
-	bmp280: pressure@78 {
+	bmp280: pressure@76 {
 		compatible = "bosch,bmp280";
 		reg = <0x76>;
 	};
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index 1ad530a39a957..34fb63ef420f5 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -373,7 +373,7 @@
 	ti,pindir-d0-out-d1-in;
 	status = "okay";
 
-	cfaf240320a032t {
+	display-controller@0 {
 		compatible = "orisetech,otm3225a";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index cf1e4f747242f..09e58fb810d95 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -1101,7 +1101,7 @@
 			};
 		};
 
-		qspi: qspi@47900000 {
+		qspi: spi@47900000 {
 			compatible = "ti,am4372-qspi";
 			reg = <0x47900000 0x100>,
 			      <0x30000000 0x4000000>;
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 203266f884807..52ae8eef60fc3 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -518,7 +518,7 @@
 	};
 
 	/* touch controller */
-	ads7846@0 {
+	touchscreen@1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ads7846_pins>;
 
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 2cb45ddd2ae3b..9136b3cf9a2ce 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1369,7 +1369,7 @@
 			status = "disabled";
 		};
 
-		qspi: qspi@4b300000 {
+		qspi: spi@4b300000 {
 			compatible = "ti,dra7xxx-qspi";
 			reg = <0x4b300000 0x100>,
 			      <0x5c000000 0x4000000>;
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 738b44cf2b0bb..1c833105d6c54 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -416,7 +416,7 @@
 			clock-names = "fck", "mmchsdb_fck";
 		};
 
-		qspi: qspi@2940000 {
+		qspi: spi@2940000 {
 			compatible = "ti,k2g-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f1d6de8b3c193..000bf16de6517 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -114,7 +114,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		mcspi1: mcspi@48098000 {
+		mcspi1: spi@48098000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi1";
 			reg = <0x48098000 0x100>;
@@ -125,7 +125,7 @@
 				    "tx2", "rx2", "tx3", "rx3";
 		};
 
-		mcspi2: mcspi@4809a000 {
+		mcspi2: spi@4809a000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi2";
 			reg = <0x4809a000 0x100>;
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 84635eeb99cd4..7f57af2f10acb 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -285,7 +285,7 @@
 			ti,timer-alwon;
 		};
 
-		mcspi3: mcspi@480b8000 {
+		mcspi3: spi@480b8000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi3";
 			reg = <0x480b8000 0x100>;
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index ded5fcf084eb7..1f91646b89516 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -40,7 +40,7 @@
 };
 
 &i2c3 {
-	ak8975@0f {
+	ak8975@f {
 		compatible = "asahi-kasei,ak8975";
 		reg = <0x0f>;
 	};
-- 
2.20.1

[PATCH AUTOSEL 4.19 066/191] ARM: dts: ux500: Correct SCU unit address

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 2f217d24ecaec2012e628d21e244eef0608656a4 ]

The unit address of the Cortex-A9 SCU device node contains one zero too
many.  Remove it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-dbx5x0.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 2310a4e97768c..3dc0028e108b3 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -197,7 +197,7 @@
 			      <0xa0410100 0x100>;
 		};
 
-		scu@a04100000 {
+		scu@a0410000 {
 			compatible = "arm,cortex-a9-scu";
 			reg = <0xa0410000 0x100>;
 		};
-- 
2.20.1

[PATCH AUTOSEL 4.19 067/191] ARM: dts: ux500: Fix LCDA clock line muxing

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit ecde29569e3484e1d0a032bf4074449bce4d4a03 ]

The "lcdaclk_b_1" group is muxed with the function "lcd"
but needs a separate entry to be muxed in with "lcda"
rather than "lcd".

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-href-family-pinctrl.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index 5c5cea232743d..1ec193b0c5065 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -607,16 +607,20 @@
 
 			mcde {
 				lcd_default_mode: lcd_default {
-					default_mux {
+					default_mux1 {
 						/* Mux in VSI0 and all the data lines */
 						function = "lcd";
 						groups =
 						"lcdvsi0_a_1", /* VSI0 for LCD */
 						"lcd_d0_d7_a_1", /* Data lines */
 						"lcd_d8_d11_a_1", /* TV-out */
-						"lcdaclk_b_1", /* Clock line for TV-out */
 						"lcdvsi1_a_1"; /* VSI1 for HDMI */
 					};
+					default_mux2 {
+						function = "lcda";
+						groups =
+						"lcdaclk_b_1"; /* Clock line for TV-out */
+					};
 					default_cfg1 {
 						pins =
 						"GPIO68_E1", /* VSI0 */
-- 
2.20.1

[PATCH AUTOSEL 4.19 068/191] ARM: dts: ste: Fix SPI controller node names

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 2f967f9e9fa076affb711da1a8389b5d33814fc6 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-dbx5x0.dtsi     | 4 ++--
 arch/arm/boot/dts/ste-hrefprev60.dtsi | 2 +-
 arch/arm/boot/dts/ste-snowball.dts    | 2 +-
 arch/arm/boot/dts/ste-u300.dts        | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 3dc0028e108b3..986767735e249 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -878,7 +878,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80002000 0x1000>;
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -892,7 +892,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		ssp@80003000 {
+		spi@80003000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80003000 0x1000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 3f14b4df69b4e..94eeb7f1c9478 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -57,7 +57,7 @@
 			};
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			/*
 			 * On the first generation boards, this SSP/SPI port was connected
 			 * to the AB8500.
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index b0b94d0530985..603890461ae0f 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -376,7 +376,7 @@
 			pinctrl-1 = <&i2c3_sleep_mode>;
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&ssp0_snowball_mode>;
 		};
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 62ecb6a2fa39e..1bd1aba3322f1 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -442,7 +442,7 @@
 			dma-names = "rx";
 		};
 
-		spi: ssp@c0006000 {
+		spi: spi@c0006000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0xc0006000 0x1000>;
 			interrupt-parent = <&vica>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 073/191] ARM: dts: marvell: Fix SPI and I2C bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit cf680cc5251487b9a39919c3cda31a108af19cf8 ]

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm/boot/dts/dove-cubox.dtb: Warning (i2c_bus_reg): /i2c-mux/i2c@0/clock-generator: I2C bus unit address format error, expected "60"
arch/arm/boot/dts/dove-cubox-es.dtb: Warning (i2c_bus_reg): /i2c-mux/i2c@0/clock-generator: I2C bus unit address format error, expected "60"
arch/arm/boot/dts/dove-cubox.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-cubox-es.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-dove-db.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-sbc-a510.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@10600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/dove-sbc-a510.dtb: Warning (spi_bus_bridge): /mbus/internal-regs/spi-ctrl@14600: node name for SPI buses should be 'spi'
arch/arm/boot/dts/orion5x-kuroboxpro.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/orion5x-linkstation-lschl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/orion5x-linkstation-lsgl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/orion5x-linkstation-lswtgl.dtb: Warning (i2c_bus_reg): /soc/internal-regs/i2c@11000/rtc: I2C bus unit address format error, expected "32"

Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/dove-cubox.dts           | 2 +-
 arch/arm/boot/dts/dove.dtsi                | 6 +++---
 arch/arm/boot/dts/orion5x-linkstation.dtsi | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 580e3cbcfbf7c..3e1584e787aec 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -87,7 +87,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	si5351: clock-generator {
+	si5351: clock-generator@60 {
 		compatible = "silabs,si5351a-msop";
 		reg = <0x60>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 4a0a5115b2984..250ad0535e8cc 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -155,7 +155,7 @@
 				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
 				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
 
-			spi0: spi-ctrl@10600 {
+			spi0: spi@10600 {
 				compatible = "marvell,orion-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -168,7 +168,7 @@
 				status = "disabled";
 			};
 
-			i2c: i2c-ctrl@11000 {
+			i2c: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
@@ -218,7 +218,7 @@
 				status = "disabled";
 			};
 
-			spi1: spi-ctrl@14600 {
+			spi1: spi@14600 {
 				compatible = "marvell,orion-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi
index ebd93df5d07a8..b6c9b85951ea6 100644
--- a/arch/arm/boot/dts/orion5x-linkstation.dtsi
+++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi
@@ -156,7 +156,7 @@
 &i2c {
 	status = "okay";
 
-	rtc {
+	rtc@32 {
 		compatible = "ricoh,rs5c372a";
 		reg = <0x32>;
 	};
-- 
2.20.1

[PATCH AUTOSEL 4.19 075/191] ARM: dts: stm32: enable display on stm32mp157c-ev1 board

[Sasha Levin]

From: Yannick Fertré <yannick.fertre@st.com>

[ Upstream commit 67330599f93672bd351123c729e2591a460fd24c ]

Enable panel raydium RM68200, DSI bridge & display controller.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157c-ev1.dts | 73 ++++++++++++++++++++++++---
 1 file changed, 67 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 372bc2ea6b921..063ee8ac5dcbd 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "stm32mp157c-ed1.dts"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
@@ -19,6 +20,58 @@
 		serial0 = &uart4;
 		ethernet0 = &ethernet0;
 	};
+
+	panel_backlight: panel-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
+		default-on;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cec_pins_a>;
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+
+	panel-dsi@0 {
+		compatible = "raydium,rm68200";
+		reg = <0>;
+		reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+		backlight = <&panel_backlight>;
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
 };
 
 &ethernet0 {
@@ -40,12 +93,6 @@
 	};
 };
 
-&cec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cec_pins_a>;
-	status = "okay";
-};
-
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
@@ -62,6 +109,20 @@
 	status = "okay";
 };
 
+&ltdc {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
 &m_can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&m_can1_pins_a>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 076/191] ARM: dts: clearfog: fix sdhci supply property name

[Sasha Levin]

From: Baruch Siach <baruch@tkos.co.il>

[ Upstream commit e807f0298144c06740022a2f900d86b7f115595e ]

The vmmc phandle, like all power supply property names, must have the
'-supply' suffix.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/armada-388-clearfog.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
index 7c6ad2afb0947..1b0d0680c8b62 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
@@ -48,7 +48,7 @@
 					     &clearfog_sdhci_cd_pins>;
 				pinctrl-names = "default";
 				status = "okay";
-				vmmc = <&reg_3p3v>;
+				vmmc-supply = <&reg_3p3v>;
 				wp-inverted;
 			};
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 077/191] ARM: dts: stm32: Fix SPI controller node names

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 1ba23b1df0bb6eec430408614c3a11280941e112 ]

SPI controller nodes should be named 'spi' rather than 'qspi'. Fixing the
name enables dtc SPI bus checks.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32mp157c.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 185541a5b69fb..c50c36baba758 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -947,7 +947,7 @@
 			dma-requests = <48>;
 		};
 
-		qspi: qspi@58003000 {
+		qspi: spi@58003000 {
 			compatible = "st,stm32f469-qspi";
 			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
 			reg-names = "qspi", "qspi_mm";
-- 
2.20.1

[PATCH AUTOSEL 4.19 083/191] net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit b78ac6ecd1b6b46f8767cbafa95a7b0b51b87ad8 ]

Allow the configuration of the MDIO clock divider when the Device Tree
contains 'clock-frequency' property (similar to I2C and SPI buses).
Because the hardware may have lost its state during suspend/resume,
re-apply the MDIO clock divider upon resumption.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../bindings/net/brcm,unimac-mdio.txt         |  3 +
 drivers/net/phy/mdio-bcm-unimac.c             | 83 ++++++++++++++++++-
 2 files changed, 84 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
index 4648948f7c3b8..e15589f477876 100644
--- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
+++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
@@ -19,6 +19,9 @@ Optional properties:
 - interrupt-names: must be "mdio_done_error" when there is a share interrupt fed
   to this hardware block, or must be "mdio_done" for the first interrupt and
   "mdio_error" for the second when there are separate interrupts
+- clocks: A reference to the clock supplying the MDIO bus controller
+- clock-frequency: the MDIO bus clock that must be output by the MDIO bus
+  hardware, if absent, the default hardware values are used
 
 Child nodes of this MDIO bus controller node are standard Ethernet PHY device
 nodes as described in Documentation/devicetree/bindings/net/phy.txt
diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c
index 8d370667fa1b3..80b9583eaa952 100644
--- a/drivers/net/phy/mdio-bcm-unimac.c
+++ b/drivers/net/phy/mdio-bcm-unimac.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <linux/of.h>
 #include <linux/of_platform.h>
@@ -45,6 +46,8 @@ struct unimac_mdio_priv {
 	void __iomem		*base;
 	int (*wait_func)	(void *wait_func_data);
 	void			*wait_func_data;
+	struct clk		*clk;
+	u32			clk_freq;
 };
 
 static inline u32 unimac_mdio_readl(struct unimac_mdio_priv *priv, u32 offset)
@@ -189,6 +192,35 @@ static int unimac_mdio_reset(struct mii_bus *bus)
 	return 0;
 }
 
+static void unimac_mdio_clk_set(struct unimac_mdio_priv *priv)
+{
+	unsigned long rate;
+	u32 reg, div;
+
+	/* Keep the hardware default values */
+	if (!priv->clk_freq)
+		return;
+
+	if (!priv->clk)
+		rate = 250000000;
+	else
+		rate = clk_get_rate(priv->clk);
+
+	div = (rate / (2 * priv->clk_freq)) - 1;
+	if (div & ~MDIO_CLK_DIV_MASK) {
+		pr_warn("Incorrect MDIO clock frequency, ignoring\n");
+		return;
+	}
+
+	/* The MDIO clock is the reference clock (typicaly 250Mhz) divided by
+	 * 2 x (MDIO_CLK_DIV + 1)
+	 */
+	reg = unimac_mdio_readl(priv, MDIO_CFG);
+	reg &= ~(MDIO_CLK_DIV_MASK << MDIO_CLK_DIV_SHIFT);
+	reg |= div << MDIO_CLK_DIV_SHIFT;
+	unimac_mdio_writel(priv, reg, MDIO_CFG);
+}
+
 static int unimac_mdio_probe(struct platform_device *pdev)
 {
 	struct unimac_mdio_pdata *pdata = pdev->dev.platform_data;
@@ -217,9 +249,26 @@ static int unimac_mdio_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (PTR_ERR(priv->clk) == -EPROBE_DEFER)
+		return PTR_ERR(priv->clk);
+	else
+		priv->clk = NULL;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	if (of_property_read_u32(np, "clock-frequency", &priv->clk_freq))
+		priv->clk_freq = 0;
+
+	unimac_mdio_clk_set(priv);
+
 	priv->mii_bus = mdiobus_alloc();
-	if (!priv->mii_bus)
-		return -ENOMEM;
+	if (!priv->mii_bus) {
+		ret = -ENOMEM;
+		goto out_clk_disable;
+	}
 
 	bus = priv->mii_bus;
 	bus->priv = priv;
@@ -253,6 +302,8 @@ static int unimac_mdio_probe(struct platform_device *pdev)
 
 out_mdio_free:
 	mdiobus_free(bus);
+out_clk_disable:
+	clk_disable_unprepare(priv->clk);
 	return ret;
 }
 
@@ -262,10 +313,37 @@ static int unimac_mdio_remove(struct platform_device *pdev)
 
 	mdiobus_unregister(priv->mii_bus);
 	mdiobus_free(priv->mii_bus);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int unimac_mdio_suspend(struct device *d)
+{
+	struct unimac_mdio_priv *priv = dev_get_drvdata(d);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int unimac_mdio_resume(struct device *d)
+{
+	struct unimac_mdio_priv *priv = dev_get_drvdata(d);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	unimac_mdio_clk_set(priv);
 
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(unimac_mdio_pm_ops,
+			 unimac_mdio_suspend, unimac_mdio_resume);
+
 static const struct of_device_id unimac_mdio_ids[] = {
 	{ .compatible = "brcm,genet-mdio-v5", },
 	{ .compatible = "brcm,genet-mdio-v4", },
@@ -281,6 +359,7 @@ static struct platform_driver unimac_mdio_driver = {
 	.driver = {
 		.name = UNIMAC_MDIO_DRV_NAME,
 		.of_match_table = unimac_mdio_ids,
+		.pm = &unimac_mdio_pm_ops,
 	},
 	.probe	= unimac_mdio_probe,
 	.remove	= unimac_mdio_remove,
-- 
2.20.1

[PATCH AUTOSEL 4.19 090/191] arm64: dts: rockchip: Fix microSD in rk3399 sapphire board

[Sasha Levin]

From: Vicente Bergas <vicencb@gmail.com>

[ Upstream commit 88a20edf76091ee7f1bb459b89d714d53f0f8940 ]

The microSD card slot in the Sapphire board is not working because of
several issues:
 1.- The vmmc power supply is missing in the DTS. It is capable of 3.0V
 and has a GPIO-based enable control.
 2.- The vqmmc power supply can provide up to 3.3V, but it is capped in
 the DTS to just 3.0V because of the vmmc capability. This results in a
 conflict from the mmc driver requesting an unsupportable voltage range
 from 3.3V to 3.0V (min > max) as reported in dmesg. So, extend the
 range up to 3.3V. The hw should be able to stand this 0.3V tolerance.
 See mmc_regulator_set_vqmmc in drivers/mmc/core/core.c.
 3.- The card detect signal is non-working. There is a known conflict
 with jtag, but the workaround in drivers/soc/rockchip/grf.c does not
 work. Adding the broken-cd attribute to the DTS fixes the issue.

Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../boot/dts/rockchip/rk3399-sapphire.dtsi    | 24 ++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 36b60791c156d..780e5e298d8bd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -93,6 +93,19 @@
 		vin-supply = <&vcc_1v8>;
 	};
 
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-always-on;
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "vcc3v0_sd";
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vcc3v3_sys: vcc3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -310,7 +323,7 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <3000000>;
@@ -469,6 +482,13 @@
 		};
 	};
 
+	sd {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins =
+				<RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	usb2 {
 		vcc5v0_host_en: vcc5v0-host-en {
 			rockchip,pins =
@@ -499,6 +519,7 @@
 };
 
 &sdmmc {
+	broken-cd;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
@@ -507,6 +528,7 @@
 	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
 	vqmmc-supply = <&vcc_sdio>;
 	status = "okay";
 };
-- 
2.20.1

[PATCH AUTOSEL 4.19 096/191] ARM: dts: rockchip: explicitly set vcc_sd0 pin to gpio on rk3188-radxarock

[Sasha Levin]

From: Heiko Stuebner <heiko@sntech.de>

[ Upstream commit a2df0984e73fd9e1dad5fc3f1c307ec3de395e30 ]

It is good practice to make the setting of gpio-pinctrls explicitly in the
devicetree, and in this case even necessary.
Rockchip boards start with iomux settings set to gpio for most pins and
while the linux pinctrl driver also implicitly sets the gpio function if
a pin is requested as gpio that is not necessarily true for other drivers.

The issue in question stems from uboot, where the sdmmc_pwr pin is set
to function 1 (sdmmc-power) by the bootrom when reading the 1st-stage
loader. The regulator controlled by the pin is active-low though, so
when the dwmmc hw-block sets its enabled bit, it actually disables the
regulator. By changing the pin back to gpio we fix that behaviour.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3188-radxarock.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 45fd2b302dda1..4a2890618f6fc 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -93,6 +93,8 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
 		startup-delay-us = <100000>;
 		vin-supply = <&vcc_io>;
 	};
@@ -315,6 +317,12 @@
 		};
 	};
 
+	sd0 {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	usb {
 		host_vbus_drv: host-vbus-drv {
 			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 100/191] ARM: dts: exynos: Correct audio subsystem parent clock on Peach Chromebooks

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit ff1e37c6809daab75f7b2dea1efe69330e8eb65b ]

The proper parent clock for audio subsystem for Exynos5420 and Exynos5800
SoCs is CLK_MAU_EPLL. This fixes following warning:

    clk: failed to reparent mout_audss to fout_epll: -22

Fixes: ed7d1307077e: ARM: dts: exynos: Enable HDMI audio support on Peach Pit
Fixes: bae0f445c1e7: ARM: dts: exynos: Enable HDMI audio support on Peach Pi
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5420-peach-pit.dts | 2 +-
 arch/arm/boot/dts/exynos5800-peach-pi.dts  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 25bdc9d97a4df..3e666caa86bfe 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -153,7 +153,7 @@
 
 &clock_audss {
 	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
 };
 
 &cpu0 {
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 7989631b39ccf..90222ec19f877 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -153,7 +153,7 @@
 
 &clock_audss {
 	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
 };
 
 &cpu0 {
-- 
2.20.1

[PATCH AUTOSEL 4.19 107/191] ARM: dts: imx6ull: update vdd_soc voltage for 900MHz operating point

[Sasha Levin]

From: Anson Huang <Anson.Huang@nxp.com>

[ Upstream commit 245f880c25dbd8927af0f33aa5d1404370013957 ]

Update VDD_SOC voltage to 1.25V for 900MHz operating point
according to datasheet Rev. 1.3, 08/2018, 25mV is added to
the minimum allowed values to cover power supply ripple.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6ull.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index cd1776a7015ac..796ed35d4ac9a 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -22,7 +22,7 @@
 	>;
 	fsl,soc-operating-points = <
 		/* KHz	uV */
-		900000	1175000
+		900000	1250000
 		792000	1175000
 		528000	1175000
 		396000	1175000
-- 
2.20.1

[PATCH AUTOSEL 4.19 130/191] ARM: dts: meson8b: odroidc1: enable the SAR ADC

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit fd6643142a0c5ab4d423ed7173a0be414d509214 ]

Odroid-C1 exposes ADC channels 0 and 1 on the GPIO headers. NOTE: Due
to the SoC design these are limited to 1.8V (instead of 3.3V like all
other pins).
Enable the SAR ADC to enable voltage measurements on these pins.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 8fdeeffecbdbc..8a09071d712a5 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -153,6 +153,11 @@
 	pinctrl-names = "default";
 };
 
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
 &sdio {
 	status = "okay";
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 131/191] arm64: dts: fsl: Fix I2C and SPI bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit b739c177e1aeab532f355493439a1901b85be38c ]

dtc has new checks for I2C and SPI buses. Fix the SPI bus node names
and warnings in unit-addresses.

arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@57: I2C bus unit address format error, expected "53"
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@56: I2C bus unit address format error, expected "52"

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi    | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi    | 6 +++---
 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++--
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi    | 4 ++--
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi    | 4 ++--
 5 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 68ac78c4564dc..5da732f82fa0c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -337,7 +337,7 @@
 			status = "disabled";
 		};
 
-		dspi: dspi@2100000 {
+		dspi: spi@2100000 {
 			compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 7881e3d81a9ab..b9c0f2de8f12c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -284,7 +284,7 @@
 			interrupts = <0 43 0x4>;
 		};
 
-		qspi: quadspi@1550000 {
+		qspi: spi@1550000 {
 			compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -382,7 +382,7 @@
 			ranges = <0x0 0x5 0x00000000 0x8000000>;
 		};
 
-		dspi0: dspi@2100000 {
+		dspi0: spi@2100000 {
 			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -395,7 +395,7 @@
 			status = "disabled";
 		};
 
-		dspi1: dspi@2110000 {
+		dspi1: spi@2110000 {
 			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 440e111651d53..a59b48203688a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -57,12 +57,12 @@
 		reg = <0x4c>;
 	};
 
-	eeprom@56 {
+	eeprom@52 {
 		compatible = "atmel,24c512";
 		reg = <0x52>;
 	};
 
-	eeprom@57 {
+	eeprom@53 {
 		compatible = "atmel,24c512";
 		reg = <0x53>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index ef83786b8b905..de6af453a6e16 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -202,7 +202,7 @@
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		qspi: quadspi@1550000 {
+		qspi: spi@1550000 {
 			compatible = "fsl,ls1021a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -361,7 +361,7 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		dspi: dspi@2100000 {
+		dspi: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 8cb78dd996728..ebe0cd4bf2b7e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -469,7 +469,7 @@
 			mmu-masters = <&fsl_mc 0x300 0>;
 		};
 
-		dspi: dspi@2100000 {
+		dspi: spi@2100000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
 			#address-cells = <1>;
@@ -595,7 +595,7 @@
 				  3 0 0x5 0x20000000 0x00010000>;
 		};
 
-		qspi: quadspi@20c0000 {
+		qspi: spi@20c0000 {
 			status = "disabled";
 			compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
 			#address-cells = <1>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 132/191] ARM: dts: imx51-zii-rdu1: Fix the rtc compatible string

[Sasha Levin]

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit 1c5f335f61ffb838fc3cc1cec9464067663eb8c8 ]

According to Documentation/devicetree/bindings/rtc/rtc-ds1307.txt the
original compatible "maxim,ds1341" is not a valid entry.

Switch to the documented "dallas,ds1341" compatible.

Reported-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx51-zii-rdu1.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index 6e80254c4562a..3fb66ddfe93a5 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -514,7 +514,7 @@
 	};
 
 	ds1341: rtc@68 {
-		compatible = "maxim,ds1341";
+		compatible = "dallas,ds1341";
 		reg = <0x68>;
 	};
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 136/191] arm64: tegra: I2C on Tegra194 is not compatible with Tegra114

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit d9fd22447ba59a9b53a202fade977e82bfba8d8d ]

Tegra194 contains a version of the I2C controller that is no longer
compatible with the version found in Tegra114.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index a4dfcd19b9e88..9fc14bb9a0aff 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -118,7 +118,7 @@
 		};
 
 		gen1_i2c: i2c@3160000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x03160000 0x10000>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -143,7 +143,7 @@
 		};
 
 		cam_i2c: i2c@3180000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x03180000 0x10000>;
 			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -157,7 +157,7 @@
 
 		/* shares pads with dpaux1 */
 		dp_aux_ch1_i2c: i2c@3190000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x03190000 0x10000>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -171,7 +171,7 @@
 
 		/* shares pads with dpaux0 */
 		dp_aux_ch0_i2c: i2c@31b0000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x031b0000 0x10000>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -184,7 +184,7 @@
 		};
 
 		gen7_i2c: i2c@31c0000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x031c0000 0x10000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -197,7 +197,7 @@
 		};
 
 		gen9_i2c: i2c@31e0000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x031e0000 0x10000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -264,7 +264,7 @@
 		};
 
 		gen2_i2c: i2c@c240000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x0c240000 0x10000>;
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -277,7 +277,7 @@
 		};
 
 		gen8_i2c: i2c@c250000 {
-			compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+			compatible = "nvidia,tegra194-i2c";
 			reg = <0x0c250000 0x10000>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 137/191] ARM: dts: tegra30: fix xcvr-setup-use-fuses

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit 564706f65cda3de52b09e51feb423a43940fe661 ]

There was a dot instead of a comma. Fix this.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra30.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index a6781f6533105..5a04ddefb71f6 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -896,7 +896,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <1>;
 		nvidia,xcvr-lsrslew = <1>;
 		nvidia,xcvr-hsslew = <32>;
@@ -933,7 +933,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
 		nvidia,xcvr-hsslew = <32>;
@@ -969,7 +969,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
 		nvidia,xcvr-hsslew = <32>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 138/191] ARM: dts: tegra20: restore address order

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit 8188391c127ea34d66f37eda6755d0acb51dc600 ]

Commit 6c468f109884 ("ARM: dts: tegra: add Tegra20 NAND flash
controller node") introduced the nand-controller node. However, it got
added at the wrong spot not honoring the address order. Fix this.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra20.dtsi | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 15b73bd377f04..80854f7de765c 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -419,19 +419,6 @@
 		status = "disabled";
 	};
 
-	gmi@70009000 {
-		compatible = "nvidia,tegra20-gmi";
-		reg = <0x70009000 0x1000>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xd0000000 0xfffffff>;
-		clocks = <&tegra_car TEGRA20_CLK_NOR>;
-		clock-names = "gmi";
-		resets = <&tegra_car 42>;
-		reset-names = "gmi";
-		status = "disabled";
-	};
-
 	nand-controller@70008000 {
 		compatible = "nvidia,tegra20-nand";
 		reg = <0x70008000 0x100>;
@@ -447,6 +434,19 @@
 		status = "disabled";
 	};
 
+	gmi@70009000 {
+		compatible = "nvidia,tegra20-gmi";
+		reg = <0x70009000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xd0000000 0xfffffff>;
+		clocks = <&tegra_car TEGRA20_CLK_NOR>;
+		clock-names = "gmi";
+		resets = <&tegra_car 42>;
+		reset-names = "gmi";
+		status = "disabled";
+	};
+
 	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 139/191] ARM: tegra: apalis_t30: fix mmc1 cmd pull-up

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit 1c997fe4becdc6fcbc06e23982ceb65621e6572a ]

Fix MMC1 cmd pin pull-up causing issues on carrier boards without
external pull-up.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra30-apalis.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 2f807d40c1b79..e749e047db7ab 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -171,14 +171,14 @@
 
 			/* Apalis MMC1 */
 			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6",
-					      "sdmmc3_cmd_pa7";
+				nvidia,pins = "sdmmc3_clk_pa6";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc3_dat0_pb7 {
-				nvidia,pins = "sdmmc3_dat0_pb7",
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
 					      "sdmmc3_dat1_pb6",
 					      "sdmmc3_dat2_pb5",
 					      "sdmmc3_dat3_pb4",
-- 
2.20.1

[PATCH AUTOSEL 4.19 140/191] ARM: tegra: apalis_t30: fix mcp2515 can controller interrupt polarity

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit b38f6aa4b60a1fcc41f5c469981f8f62d6070ee3 ]

Fix the MCP2515 SPI CAN controller interrupt polarity which according
to its datasheet defaults to low-active aka falling edge.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra30-apalis.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index e749e047db7ab..f810bbf8212bd 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -659,7 +659,7 @@
 			reg = <1>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
 			spi-max-frequency = <10000000>;
 		};
 	};
@@ -674,7 +674,7 @@
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
 			spi-max-frequency = <10000000>;
 		};
 	};
-- 
2.20.1

[PATCH AUTOSEL 4.19 141/191] ARM: tegra: colibri_t30: fix mcp2515 can controller interrupt polarity

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit 503fcd8464fb6cd18073e97dec59b933930655d6 ]

Fix the MCP2515 SPI CAN controller interrupt polarity which according
to its datasheet defaults to low-active aka falling edge.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 16e1f387aa6db..a0c550e26738f 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -79,7 +79,8 @@
 			reg = <0>;
 			clocks = <&clk16m>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>;
+			/* CAN_INT */
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
 			spi-max-frequency = <10000000>;
 		};
 		spidev0: spi@1 {
-- 
2.20.1

[PATCH AUTOSEL 4.19 142/191] ARM: dts: paz00: fix wakeup gpio keycode

[Sasha Levin]

From: Marc Dietrich <marvin24@gmx.de>

[ Upstream commit ebea2a43fdafdbce918bd7e200b709d6c33b9f3b ]

The power key is controlled solely by the EC, which only tiggeres this
gpio after wakeup.
Fixes immediately return to suspend after wake from LP1.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra20-paz00.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index ef245291924f0..4f9b4a889febe 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -524,10 +524,10 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
-			label = "Power";
+		wakeup {
+			label = "Wakeup";
 			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
+			linux,code = <KEY_WAKEUP>;
 			wakeup-source;
 		};
 	};
-- 
2.20.1

[PATCH AUTOSEL 4.19 151/191] ARM: dts: realview: Fix SPI controller node names

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 016add12977bcc30f77d7e48fc9a3a024cb46645 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/arm-realview-eb.dtsi    | 2 +-
 arch/arm/boot/dts/arm-realview-pb1176.dts | 2 +-
 arch/arm/boot/dts/arm-realview-pb11mp.dts | 2 +-
 arch/arm/boot/dts/arm-realview-pbx.dtsi   | 2 +-
 arch/arm/boot/dts/versatile-ab.dts        | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index a917cf8825ca8..0e4c7c4c8c093 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -371,7 +371,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp: ssp@1000d000 {
+		ssp: spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index f935b72d3d964..f2a1d25eb6cf3 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -380,7 +380,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		pb1176_ssp: ssp@1010b000 {
+		pb1176_ssp: spi@1010b000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1010b000 0x1000>;
 			interrupt-parent = <&intc_dc1176>;
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 36203288de426..7f9cbdf33a510 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -523,7 +523,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp@1000d000 {
+		spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			interrupt-parent = <&intc_pb11mp>;
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index 10868ba3277f5..a5676697ff3b7 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -362,7 +362,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		ssp: ssp@1000d000 {
+		ssp: spi@1000d000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 5f61d36090270..6f4f60ba5429c 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -373,7 +373,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		ssp@101f4000 {
+		spi@101f4000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x101f4000 0x1000>;
 			interrupts = <11>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 177/191] arm64: dts: amd: Fix SPI bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit e9f0878c4b2004ac19581274c1ae4c61ae3ca70e ]

dtc has new checks for SPI buses. Fix the warnings in node names.

arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'

Cc: Brijesh Singh <brijeshkumar.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 125f4deb52fe9..b664e7af74eb3 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -107,7 +107,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		spi0: ssp@e1020000 {
+		spi0: spi@e1020000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1020000 0 0x1000>;
@@ -117,7 +117,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		spi1: ssp@e1030000 {
+		spi1: spi@e1030000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0 0xe1030000 0 0x1000>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 178/191] arm64: dts: lg: Fix SPI controller node names

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 09bae3b64cb580c95329bd8d16f08f0a5cb81ec9 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/lg/lg1312.dtsi | 4 ++--
 arch/arm64/boot/dts/lg/lg1313.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index 860c8fb107950..4bde7b6f2b113 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -168,14 +168,14 @@
 			clock-names = "apb_pclk";
 			status="disabled";
 		};
-		spi0: ssp@fe800000 {
+		spi0: spi@fe800000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe800000 0x1000>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_bus>;
 			clock-names = "apb_pclk";
 		};
-		spi1: ssp@fe900000 {
+		spi1: spi@fe900000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe900000 0x1000>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index 1887af654a7db..16ced1ff1ad36 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -168,14 +168,14 @@
 			clock-names = "apb_pclk";
 			status="disabled";
 		};
-		spi0: ssp@fe800000 {
+		spi0: spi@fe800000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe800000 0x1000>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_bus>;
 			clock-names = "apb_pclk";
 		};
-		spi1: ssp@fe900000 {
+		spi1: spi@fe900000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0xfe900000 0x1000>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 179/191] ARM: dts: lpc32xx: Fix SPI controller node names

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 11236ef582b8d66290bb3b3710e03ca1d85d8ad8 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/lpc32xx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 4981741377f3a..ed0d6fb20122a 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -179,7 +179,7 @@
 			 * ssp0 and spi1 are shared pins;
 			 * enable one in your board dts, as needed.
 			 */
-			ssp0: ssp@20084000 {
+			ssp0: spi@20084000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x20084000 0x1000>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
@@ -199,7 +199,7 @@
 			 * ssp1 and spi2 are shared pins;
 			 * enable one in your board dts, as needed.
 			 */
-			ssp1: ssp@2008c000 {
+			ssp1: spi@2008c000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x2008c000 0x1000>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.20.1