[PATCH AUTOSEL 4.4 15/40] ARM: dts: am335x-evm: fix number of cpsw

[PATCH AUTOSEL 4.4 15/40] ARM: dts: am335x-evm: fix number of cpsw

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit dcbf6b18d81bcdc51390ca1b258c17e2e13b7d0c ]

am335x-evm has only one CPSW external port physically wired, but DT defines
2 ext. ports. As result, PHY connection failure reported for the second
ext. port.

Update DT to reflect am335x-evm board HW configuration, and, while here,
switch to use phy-handle instead of phy_id.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am335x-evm.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d9d00ab863a21..2b8614e406f03 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -697,6 +697,7 @@
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
+	slaves = <1>;
 };
 
 &davinci_mdio {
@@ -704,15 +705,14 @@
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
-};
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 16/40] ARM: dts: ux500: Correct SCU unit address

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 2f217d24ecaec2012e628d21e244eef0608656a4 ]

The unit address of the Cortex-A9 SCU device node contains one zero too
many.  Remove it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-dbx5x0.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 50f5e9d092038..86bd320057a38 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -186,7 +186,7 @@
 			      <0xa0410100 0x100>;
 		};
 
-		scu@a04100000 {
+		scu@a0410000 {
 			compatible = "arm,cortex-a9-scu";
 			reg = <0xa0410000 0x100>;
 		};
-- 
2.20.1

[PATCH AUTOSEL 4.4 17/40] ARM: dts: ux500: Fix LCDA clock line muxing

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit ecde29569e3484e1d0a032bf4074449bce4d4a03 ]

The "lcdaclk_b_1" group is muxed with the function "lcd"
but needs a separate entry to be muxed in with "lcda"
rather than "lcd".

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-href-family-pinctrl.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index 5c5cea232743d..1ec193b0c5065 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -607,16 +607,20 @@
 
 			mcde {
 				lcd_default_mode: lcd_default {
-					default_mux {
+					default_mux1 {
 						/* Mux in VSI0 and all the data lines */
 						function = "lcd";
 						groups =
 						"lcdvsi0_a_1", /* VSI0 for LCD */
 						"lcd_d0_d7_a_1", /* Data lines */
 						"lcd_d8_d11_a_1", /* TV-out */
-						"lcdaclk_b_1", /* Clock line for TV-out */
 						"lcdvsi1_a_1"; /* VSI1 for HDMI */
 					};
+					default_mux2 {
+						function = "lcda";
+						groups =
+						"lcdaclk_b_1"; /* Clock line for TV-out */
+					};
 					default_cfg1 {
 						pins =
 						"GPIO68_E1", /* VSI0 */
-- 
2.20.1

[PATCH AUTOSEL 4.4 18/40] ARM: dts: ste: Fix SPI controller node names

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 2f967f9e9fa076affb711da1a8389b5d33814fc6 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ste-dbx5x0.dtsi     | 4 ++--
 arch/arm/boot/dts/ste-hrefprev60.dtsi | 2 +-
 arch/arm/boot/dts/ste-snowball.dts    | 2 +-
 arch/arm/boot/dts/ste-u300.dts        | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 86bd320057a38..b2b23ceb6d557 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -894,7 +894,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80002000 0x1000>;
 			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -908,7 +908,7 @@
 			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
-		ssp@80003000 {
+		spi@80003000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80003000 0x1000>;
 			interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index b0278f4c486ce..55a6a1ac03370 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -57,7 +57,7 @@
 			};
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			/*
 			 * On the first generation boards, this SSP/SPI port was connected
 			 * to the AB8500.
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index e80e421638836..bb1b64d6ab5e8 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -311,7 +311,7 @@
 			pinctrl-1 = <&i2c3_sleep_mode>;
 		};
 
-		ssp@80002000 {
+		spi@80002000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&ssp0_snowball_mode>;
 		};
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 82a661677e97e..fb6ca7f864176 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -451,7 +451,7 @@
 			dma-names = "rx";
 		};
 
-		spi: ssp@c0006000 {
+		spi: spi@c0006000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0xc0006000 0x1000>;
 			interrupt-parent = <&vica>;
-- 
2.20.1

[PATCH AUTOSEL 4.4 34/40] ARM: dts: tegra30: fix xcvr-setup-use-fuses

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit 564706f65cda3de52b09e51feb423a43940fe661 ]

There was a dot instead of a comma. Fix this.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra30.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 313e260529a31..e8f5a55c4b954 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -823,7 +823,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <1>;
 		nvidia,xcvr-lsrslew = <1>;
 		nvidia,xcvr-hsslew = <32>;
@@ -860,7 +860,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
 		nvidia,xcvr-hsslew = <32>;
@@ -896,7 +896,7 @@
 		nvidia,elastic-limit = <16>;
 		nvidia,term-range-adj = <6>;
 		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
 		nvidia,xcvr-hsslew = <32>;
-- 
2.20.1

[PATCH AUTOSEL 4.4 35/40] ARM: tegra: apalis_t30: fix mmc1 cmd pull-up

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit 1c997fe4becdc6fcbc06e23982ceb65621e6572a ]

Fix MMC1 cmd pin pull-up causing issues on carrier boards without
external pull-up.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra30-apalis.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index bf361277fe105..9a8c20cd06885 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -147,14 +147,14 @@
 
 			/* Apalis MMC1 */
 			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6",
-					      "sdmmc3_cmd_pa7";
+				nvidia,pins = "sdmmc3_clk_pa6";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc3_dat0_pb7 {
-				nvidia,pins = "sdmmc3_dat0_pb7",
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
 					      "sdmmc3_dat1_pb6",
 					      "sdmmc3_dat2_pb5",
 					      "sdmmc3_dat3_pb4",
-- 
2.20.1

[PATCH AUTOSEL 4.4 39/40] arm64: dts: amd: Fix SPI bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit e9f0878c4b2004ac19581274c1ae4c61ae3ca70e ]

dtc has new checks for SPI buses. Fix the warnings in node names.

arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'

Cc: Brijesh Singh <brijeshkumar.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 2874d92881fda..a3030c868be5f 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -84,7 +84,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		spi0: ssp@e1020000 {
+		spi0: spi@e1020000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			#gpio-cells = <2>;
@@ -95,7 +95,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		spi1: ssp@e1030000 {
+		spi1: spi@e1030000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
 			#gpio-cells = <2>;
-- 
2.20.1