From: Mike Leach <mike.leach@linaro.org>
To: mike.leach@linaro.org, coresight@lists.linaro.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-doc@vger.kernel.org
Cc: mathieu.poirier@linaro.org, suzuki.poulose@arm.com
Subject: [PATCH v5 06/14] coresight: cti: Add device tree support for v8 arch CTI
Date: Tue, 19 Nov 2019 23:19:04 +0000 [thread overview]
Message-ID: <20191119231912.12768-7-mike.leach@linaro.org> (raw)
In-Reply-To: <20191119231912.12768-1-mike.leach@linaro.org>
The v8 architecture defines the relationship between a PE, its optional ETM
and a CTI. Unlike non-architectural CTIs which are implementation defined,
this has a fixed set of connections which can therefore be represented as a
simple tag in the device tree.
This patch defines the tags needed to create an entry for this PE/ETM/CTI
relationship, and provides functionality to implement the connection model
in the CTI driver.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
---
.../coresight/coresight-cti-platform.c | 205 ++++++++++++++++++
1 file changed, 205 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-cti-platform.c b/drivers/hwtracing/coresight/coresight-cti-platform.c
index 665be86c585d..790dd30b85f5 100644
--- a/drivers/hwtracing/coresight/coresight-cti-platform.c
+++ b/drivers/hwtracing/coresight/coresight-cti-platform.c
@@ -3,10 +3,208 @@
* Copyright (c) 2019, The Linaro Limited. All rights reserved.
*/
+#include <dt-bindings/arm/coresight-cti-dt.h>
#include <linux/of.h>
#include "coresight-cti.h"
+/* Number of CTI signals in the v8 architecturally defined connection */
+#define NR_V8PE_IN_SIGS 2
+#define NR_V8PE_OUT_SIGS 3
+#define NR_V8ETM_INOUT_SIGS 4
+
+/* CTI device tree connection property keywords */
+#define CTI_DT_V8ARCH "arm,cti-v8-arch"
+#define CTI_DT_CSDEV_ASSOC "arm,cs-dev-assoc"
+
+/*
+ * Find a registered coresight device from a device fwnode.
+ * The node info is associated with the AMBA parent, but the
+ * csdev keeps a copy so iterate round the coresight bus to
+ * find the device.
+ */
+static struct coresight_device *
+cti_get_assoc_csdev_by_fwnode(struct fwnode_handle *r_fwnode)
+{
+ struct device *dev;
+ struct coresight_device *csdev = NULL;
+
+ dev = bus_find_device_by_fwnode(&coresight_bustype, r_fwnode);
+ if (dev) {
+ csdev = to_coresight_device(dev);
+ put_device(dev);
+ }
+ return csdev;
+}
+
+#ifdef CONFIG_OF
+/*
+ * CTI can be bound to a CPU, or a system device.
+ * CPU can be declared at the device top level or in a connections node
+ * so need to check relative to node not device.
+ */
+static int of_cti_get_cpu_at_node(const struct device_node *node)
+{
+ int cpu;
+ struct device_node *dn;
+
+ if (node == NULL)
+ return -1;
+
+ dn = of_parse_phandle(node, "cpu", 0);
+ /* CTI affinity defaults to no cpu */
+ if (!dn)
+ return -1;
+ cpu = of_cpu_node_to_id(dn);
+ of_node_put(dn);
+
+ /* No Affinity if no cpu nodes are found */
+ return (cpu < 0) ? -1 : cpu;
+}
+
+static const char *of_cti_get_node_name(const struct device_node *node)
+{
+ if (node)
+ return node->full_name;
+ return "unknown";
+}
+#else
+static int of_cti_get_cpu_at_node(const struct device_node *node)
+{
+ return -1;
+}
+
+static const char *of_cti_get_node_name(const struct device_node *node)
+{
+ return "unknown";
+}
+#endif
+
+static int cti_plat_get_cpu_at_node(struct fwnode_handle *fwnode)
+{
+ if (is_of_node(fwnode))
+ return of_cti_get_cpu_at_node(to_of_node(fwnode));
+ return -1;
+}
+
+static const char *cti_plat_get_node_name(struct fwnode_handle *fwnode)
+{
+ if (is_of_node(fwnode))
+ return of_cti_get_node_name(to_of_node(fwnode));
+ return "unknown";
+}
+
+static int cti_plat_create_v8_etm_connection(struct device *dev,
+ struct cti_drvdata *drvdata)
+{
+ int ret = -ENOMEM, i;
+ struct fwnode_handle *root_fwnode, *cs_fwnode;
+ const char *assoc_name = NULL;
+ struct coresight_device *csdev;
+ struct cti_trig_con *tc = NULL;
+
+ root_fwnode = dev_fwnode(dev);
+ if (IS_ERR_OR_NULL(root_fwnode))
+ return -EINVAL;
+
+ /* Can optionally have an etm node - return if not */
+ cs_fwnode = fwnode_find_reference(root_fwnode, CTI_DT_CSDEV_ASSOC, 0);
+ if (IS_ERR_OR_NULL(cs_fwnode))
+ return 0;
+
+ /* allocate memory */
+ tc = cti_allocate_trig_con(dev, NR_V8ETM_INOUT_SIGS,
+ NR_V8ETM_INOUT_SIGS);
+ if (!tc)
+ goto create_v8_etm_out;
+
+ /* build connection data */
+ tc->con_in->used_mask = 0xF0; /* sigs <4,5,6,7> */
+ tc->con_out->used_mask = 0xF0; /* sigs <4,5,6,7> */
+
+ /*
+ * The EXTOUT type signals from the ETM are connected to a set of input
+ * triggers on the CTI, the EXTIN being connected to output triggers.
+ */
+ for (i = 0; i < NR_V8ETM_INOUT_SIGS; i++) {
+ tc->con_in->sig_types[i] = ETM_EXTOUT;
+ tc->con_out->sig_types[i] = ETM_EXTIN;
+ }
+
+ /*
+ * We look to see if the ETM coresight device associated with this
+ * handle has been registered with the system - i.e. probed before
+ * this CTI. If so csdev will be non NULL and we can use the device
+ * name and pass the csdev to the connection entry function where
+ * the association will be recorded.
+ * If not, then simply record the name in the connection data, the
+ * probing of the ETM will call into the CTI driver API to update the
+ * association then.
+ */
+ csdev = cti_get_assoc_csdev_by_fwnode(cs_fwnode);
+ if (csdev)
+ assoc_name = dev_name(&csdev->dev);
+ else
+ assoc_name = cti_plat_get_node_name(cs_fwnode);
+ ret = cti_add_connection_entry(dev, drvdata, tc, csdev, assoc_name);
+
+create_v8_etm_out:
+ fwnode_handle_put(cs_fwnode);
+ return ret;
+}
+
+/*
+ * Create an architecturally defined v8 connection
+ * must have a cpu, can have an ETM.
+ */
+static int cti_plat_create_v8_connections(struct device *dev,
+ struct cti_drvdata *drvdata)
+{
+ struct cti_device *cti_dev = &drvdata->ctidev;
+ struct cti_trig_con *tc = NULL;
+ int cpuid = 0;
+ char cpu_name_str[16];
+ int ret = -ENOMEM;
+
+ /* Must have a cpu node */
+ cpuid = cti_plat_get_cpu_at_node(dev_fwnode(dev));
+ if (cpuid < 0) {
+ dev_warn(dev, "CTI v8 DT binding no cpu\n");
+ return -EINVAL;
+ }
+ cti_dev->cpu = cpuid;
+
+ /* Allocate the v8 cpu connection memory */
+ tc = cti_allocate_trig_con(dev, NR_V8PE_IN_SIGS, NR_V8PE_OUT_SIGS);
+ if (!tc)
+ goto of_create_v8_out;
+
+ /* Set the v8 PE CTI connection data */
+ tc->con_in->used_mask = 0x3; /* sigs <0 1> */
+ tc->con_in->sig_types[0] = PE_DBGTRIGGER;
+ tc->con_in->sig_types[1] = PE_PMUIRQ;
+ tc->con_out->used_mask = 0x7; /* sigs <0 1 2 > */
+ tc->con_out->sig_types[0] = PE_EDBGREQ;
+ tc->con_out->sig_types[1] = PE_DBGRESTART;
+ tc->con_out->sig_types[2] = PE_CTIIRQ;
+ scnprintf(cpu_name_str, sizeof(cpu_name_str), "cpu%d", cpuid);
+
+ ret = cti_add_connection_entry(dev, drvdata, tc, NULL, cpu_name_str);
+ if (ret)
+ goto of_create_v8_out;
+
+ /* Create the v8 ETM associated connection */
+ ret = cti_plat_create_v8_etm_connection(dev, drvdata);
+ if (ret)
+ goto of_create_v8_out;
+
+ /* filter pe_edbgreq - PE trigout sig <0> */
+ drvdata->config.trig_out_filter |= 0x1;
+
+of_create_v8_out:
+ return ret;
+}
+
/* get the hardware configuration & connection data. */
int cti_plat_get_hw_data(struct device *dev,
struct cti_drvdata *drvdata)
@@ -14,6 +212,13 @@ int cti_plat_get_hw_data(struct device *dev,
int rc = 0;
struct cti_device *cti_dev = &drvdata->ctidev;
+ /* check for a v8 architectural CTI device */
+ if (device_property_read_bool(dev, CTI_DT_V8ARCH)) {
+ rc = cti_plat_create_v8_connections(dev, drvdata);
+ if (rc)
+ return rc;
+ }
+
/* if no connections, just add a single default based on max IN-OUT */
if (cti_dev->nr_trig_con == 0)
rc = cti_add_default_connection(dev, drvdata);
--
2.17.1
next prev parent reply other threads:[~2019-11-19 23:19 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-19 23:18 [PATCH v5 00/14] CoreSight CTI Driver Mike Leach
2019-11-19 23:18 ` [PATCH v5 01/14] coresight: cti: Initial " Mike Leach
2019-11-21 20:21 ` Mathieu Poirier
2019-11-29 12:05 ` Mike Leach
2019-12-03 16:53 ` Mathieu Poirier
2019-11-25 19:03 ` Suzuki Kuruppassery Poulose
2019-11-29 12:06 ` Mike Leach
2019-11-19 23:19 ` [PATCH v5 02/14] coresight: cti: Add sysfs coresight mgmt reg access Mike Leach
2019-11-22 17:19 ` Mathieu Poirier
2019-11-19 23:19 ` [PATCH v5 03/14] coresight: cti: Add sysfs access to program function regs Mike Leach
2019-11-27 18:26 ` Suzuki Kuruppassery Poulose
2019-11-29 12:47 ` Mike Leach
2019-11-28 10:54 ` Suzuki Kuruppassery Poulose
2019-11-28 17:20 ` Mathieu Poirier
2019-11-28 18:00 ` Suzuki Kuruppassery Poulose
2019-11-29 12:50 ` Mike Leach
2019-11-19 23:19 ` [PATCH v5 04/14] coresight: cti: Add sysfs trigger / channel programming API Mike Leach
2019-11-22 18:40 ` Mathieu Poirier
2019-11-27 18:40 ` Suzuki Kuruppassery Poulose
2019-11-29 13:01 ` Mike Leach
2019-11-19 23:19 ` [PATCH v5 05/14] dt-bindings: arm: Adds CoreSight CTI hardware definitions Mike Leach
2019-11-20 19:06 ` Mathieu Poirier
2019-11-20 22:39 ` Mike Leach
2019-11-22 23:33 ` Rob Herring
2019-11-29 13:50 ` Mike Leach
2019-11-29 14:12 ` Suzuki Kuruppassery Poulose
2019-11-28 18:38 ` Suzuki Kuruppassery Poulose
2019-11-29 13:57 ` Mike Leach
2019-11-19 23:19 ` Mike Leach [this message]
2019-11-25 19:00 ` [PATCH v5 06/14] coresight: cti: Add device tree support for v8 arch CTI Mathieu Poirier
2019-11-29 11:33 ` Suzuki Kuruppassery Poulose
2019-12-03 10:59 ` Mike Leach
2019-12-03 11:28 ` Suzuki Kuruppassery Poulose
2019-12-03 12:25 ` Mike Leach
2019-11-19 23:19 ` [PATCH v5 07/14] coresight: cti: Add device tree support for custom CTI Mike Leach
2019-11-25 21:22 ` Mathieu Poirier
2019-11-29 14:16 ` Suzuki Kuruppassery Poulose
2019-11-29 21:11 ` Mathieu Poirier
2019-11-29 14:18 ` Suzuki Kuruppassery Poulose
2019-12-03 14:05 ` Mike Leach
2019-11-19 23:19 ` [PATCH v5 08/14] coresight: cti: Enable CTI associated with devices Mike Leach
2019-11-25 22:45 ` Mathieu Poirier
2019-12-05 16:33 ` Mike Leach
2019-11-29 18:28 ` Suzuki Kuruppassery Poulose
2019-11-29 21:25 ` Mathieu Poirier
2019-12-05 16:33 ` Mike Leach
2019-11-19 23:19 ` [PATCH v5 09/14] coresight: cti: Add connection information to sysfs Mike Leach
2019-11-27 18:09 ` Mathieu Poirier
2019-12-06 16:24 ` Mike Leach
2019-12-02 9:47 ` Suzuki Kuruppassery Poulose
2019-12-06 16:24 ` Mike Leach
2019-11-19 23:19 ` [PATCH v5 10/14] dt-bindings: qcom: Add CTI options for qcom msm8916 Mike Leach
2019-11-27 18:18 ` Mathieu Poirier
2019-11-19 23:19 ` [PATCH v5 11/14] dt-bindings: arm: Juno platform - add CTI entries to device tree Mike Leach
2019-11-27 18:25 ` Mathieu Poirier
2019-11-19 23:19 ` [PATCH v5 12/14] dt-bindings: hisilicon: Add CTI bindings for hi-6220 Mike Leach
2019-11-19 23:19 ` [PATCH v5 13/14] docs: coresight: Update documentation for CoreSight to cover CTI Mike Leach
2019-11-27 19:00 ` Mathieu Poirier
2019-12-02 10:43 ` Suzuki Kuruppassery Poulose
2019-12-06 17:39 ` Mike Leach
2019-11-19 23:19 ` [PATCH v5 14/14] docs: sysfs: coresight: Add sysfs ABI documentation for CTI Mike Leach
2019-11-27 19:08 ` Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191119231912.12768-7-mike.leach@linaro.org \
--to=mike.leach@linaro.org \
--cc=coresight@lists.linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=suzuki.poulose@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).