* [PATCH 0/6] STM32 DT: Updates for SOC diversity
@ 2019-11-20 14:41 Alexandre Torgue
2019-11-20 14:41 ` [PATCH 1/6] ARM: dts: stm32: Adapt stm32mp157 pinctrl to manage STM32MP15xx SOCs family Alexandre Torgue
` (6 more replies)
0 siblings, 7 replies; 10+ messages in thread
From: Alexandre Torgue @ 2019-11-20 14:41 UTC (permalink / raw)
To: Maxime Coquelin, arnd, robh+dt, mark.rutland
Cc: linux-arm-kernel, devicetree, Alexandre Torgue, linux-stm32,
linux-kernel, Manivannan Sadhasivam
This series updates stm32mp device tree files in order to handle the STM32MP15
part numbers diversity. STM32MP15 part numbers are built in this way:
-STM32MP15X: X = [1, 3, 7] for IPs diversity:
-STM32MP151 = basic part
-STM32MP153 = STM32MP153 + a second CPU A7 + MCAN(x2)
-STM32MP157 = STM32MP153 + DSI + GPU
-STMM32MP15xY: Y = [a, c] for security diversity:
-STM32MP15xA: basic part.
-STM32MP15xC: adds crypto IP.
-STM32MP15xxZZ: ZZ = [aa, ab, ac, ad] for packages (IO) diversity:
-STM32MP15xxAA: TFBGA448 18x18
-STM32MP15xxAB: LFBGA354 16x16
-STM32MP15xxAC: TFBGA361 12x12
-STM32MP15xxAD: TFBGA257 10x10
New device tree files are created and some existing are renamed to match with
this split.
In this way it is easy to assemble (by inclusion) those files to match with the
SOC partnumber used on board, and then it's simpler for users to create their
own device tree board file using the correct SOC.
For more details:
See STM32MP151 [1], STM32MP153 [2], STM32MP157 [3] reference manuals:
[1] https://www.st.com/resource/en/reference_manual/dm00366349.pdf
[2] https://www.st.com/resource/en/reference_manual/dm00366355.pdf
[3] https://www.st.com/resource/en/reference_manual/dm00327659.pdf
Product family:
https://www.st.com/en/microcontrollers-microprocessors/stm32-arm-cortex-mpus.html#products
regards
Alex
Alexandre Torgue (6):
ARM: dts: stm32: Adapt stm32mp157 pinctrl to manage STM32MP15xx SOCs
family
ARM: dts: stm32: Update stm32mp157 pinctrl files
ARM: dts: stm32: Introduce new STM32MP15 SOCs: STM32MP151 and
STM32MP153
ARM: dts: stm32: Manage security diversity for STM32M15x SOCs
ARM: dts: stm32: Adapt STM32MP157 DK boards to stm32 DT diversity
ARM: dts: stm32: Adapt STM32MP157C ED1 board to STM32 DT diversity
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 1087 +++++++++++++++
.../dts/{stm32mp157c.dtsi => stm32mp151.dtsi} | 218 ++-
arch/arm/boot/dts/stm32mp153.dtsi | 45 +
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 1240 -----------------
arch/arm/boot/dts/stm32mp157.dtsi | 31 +
arch/arm/boot/dts/stm32mp157a-avenger96.dts | 5 +-
arch/arm/boot/dts/stm32mp157a-dk1.dts | 604 +-------
arch/arm/boot/dts/stm32mp157c-dk2.dts | 6 +-
arch/arm/boot/dts/stm32mp157c-ed1.dts | 6 +-
arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi | 90 --
arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi | 62 -
arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi | 78 --
arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi | 62 -
arch/arm/boot/dts/stm32mp15xc.dtsi | 18 +
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 606 ++++++++
arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi | 85 ++
arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi | 57 +
arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi | 73 +
arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi | 57 +
19 files changed, 2232 insertions(+), 2198 deletions(-)
create mode 100644 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
rename arch/arm/boot/dts/{stm32mp157c.dtsi => stm32mp151.dtsi} (91%)
create mode 100644 arch/arm/boot/dts/stm32mp153.dtsi
delete mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp157.dtsi
delete mode 100644 arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi
delete mode 100644 arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi
delete mode 100644 arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi
delete mode 100644 arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp15xc.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi
--
2.17.1
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH 1/6] ARM: dts: stm32: Adapt stm32mp157 pinctrl to manage STM32MP15xx SOCs family 2019-11-20 14:41 [PATCH 0/6] STM32 DT: Updates for SOC diversity Alexandre Torgue @ 2019-11-20 14:41 ` Alexandre Torgue 2019-11-20 14:41 ` [PATCH 2/6] ARM: dts: stm32: Update stm32mp157 pinctrl files Alexandre Torgue ` (5 subsequent siblings) 6 siblings, 0 replies; 10+ messages in thread From: Alexandre Torgue @ 2019-11-20 14:41 UTC (permalink / raw) To: Maxime Coquelin, arnd, robh+dt, mark.rutland Cc: linux-arm-kernel, devicetree, Alexandre Torgue, linux-stm32, linux-kernel, Manivannan Sadhasivam This commit modifies stm32mp157 pinctrl files to better manage STM32MP15xx SOCs diversity. Pin controller and gpio controller are moved to common SOC dtsi file. Only pin groups remain in the main pinctrl dtsi file. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index e8dfed4b6ade..14e0ee82d94d 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -5,1236 +5,1083 @@ */ #include <dt-bindings/pinctrl/stm32-pinfunc.h> -/ { - soc { - pinctrl: pin-controller@50002000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32mp157-pinctrl"; - ranges = <0 0x50002000 0xa400>; - interrupt-parent = <&exti>; - st,syscfg = <&exti 0x60 0xff>; - pins-are-numbered; - - gpioa: gpio@50002000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x0 0x400>; - clocks = <&rcc GPIOA>; - st,bank-name = "GPIOA"; - status = "disabled"; - }; - - gpiob: gpio@50003000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x400>; - clocks = <&rcc GPIOB>; - st,bank-name = "GPIOB"; - status = "disabled"; - }; - - gpioc: gpio@50004000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x400>; - clocks = <&rcc GPIOC>; - st,bank-name = "GPIOC"; - status = "disabled"; - }; - - gpiod: gpio@50005000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x400>; - clocks = <&rcc GPIOD>; - st,bank-name = "GPIOD"; - status = "disabled"; - }; - - gpioe: gpio@50006000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x400>; - clocks = <&rcc GPIOE>; - st,bank-name = "GPIOE"; - status = "disabled"; - }; - - gpiof: gpio@50007000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x400>; - clocks = <&rcc GPIOF>; - st,bank-name = "GPIOF"; - status = "disabled"; - }; - - gpiog: gpio@50008000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x6000 0x400>; - clocks = <&rcc GPIOG>; - st,bank-name = "GPIOG"; - status = "disabled"; - }; - - gpioh: gpio@50009000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x7000 0x400>; - clocks = <&rcc GPIOH>; - st,bank-name = "GPIOH"; - status = "disabled"; - }; - - gpioi: gpio@5000a000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x8000 0x400>; - clocks = <&rcc GPIOI>; - st,bank-name = "GPIOI"; - status = "disabled"; - }; - - gpioj: gpio@5000b000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x9000 0x400>; - clocks = <&rcc GPIOJ>; - st,bank-name = "GPIOJ"; - status = "disabled"; - }; - - gpiok: gpio@5000c000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0xa000 0x400>; - clocks = <&rcc GPIOK>; - st,bank-name = "GPIOK"; - status = "disabled"; - }; - - adc1_in6_pins_a: adc1-in6 { - pins { - pinmux = <STM32_PINMUX('F', 12, ANALOG)>; - }; - }; - - adc12_ain_pins_a: adc12-ain-0 { - pins { - pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */ - <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ - <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */ - <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */ - }; - }; - - adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { - pins { - pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */ - <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */ - }; - }; - - cec_pins_a: cec-0 { - pins { - pinmux = <STM32_PINMUX('A', 15, AF4)>; - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - cec_pins_sleep_a: cec-sleep-0 { - pins { - pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */ - }; - }; - - cec_pins_b: cec-1 { - pins { - pinmux = <STM32_PINMUX('B', 6, AF5)>; - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - cec_pins_sleep_b: cec-sleep-1 { - pins { - pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */ - }; - }; - - dac_ch1_pins_a: dac-ch1 { - pins { - pinmux = <STM32_PINMUX('A', 4, ANALOG)>; - }; - }; - - dac_ch2_pins_a: dac-ch2 { - pins { - pinmux = <STM32_PINMUX('A', 5, ANALOG)>; - }; - }; - - dcmi_pins_a: dcmi-0 { - pins { - pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ - <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ - <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ - <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */ - <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ - <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ - <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */ - <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */ - <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */ - <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ - <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */ - <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */ - <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */ - <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */ - <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */ - bias-disable; - }; - }; - - dcmi_sleep_pins_a: dcmi-sleep-0 { - pins { - pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ - <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ - <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ - <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */ - <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ - <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ - <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */ - <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */ - <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */ - <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ - <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */ - <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */ - <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */ - <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */ - <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */ - }; - }; - - ethernet0_rgmii_pins_a: rgmii-0 { - pins1 { - pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ - <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ - <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ - <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ - <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ - <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ - <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ - <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ - <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ - bias-disable; - drive-push-pull; - slew-rate = <3>; - }; - pins2 { - pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ - <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ - <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ - <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ - <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ - <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ - bias-disable; - }; - }; - - ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { - pins1 { - pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ - <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ - <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ - <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ - <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ - <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ - <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ - <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ - <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ - <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ - <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ - <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */ - <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ - <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ - <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ - }; - }; - - fmc_pins_a: fmc-0 { - pins1 { - pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ - <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */ - <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */ - <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */ - <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */ - <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */ - <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */ - <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */ - <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */ - <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */ - <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */ - <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */ - <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */ - bias-pull-up; - }; - }; - - fmc_sleep_pins_a: fmc-sleep-0 { - pins { - pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */ - <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */ - <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */ - <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */ - <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */ - <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */ - <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */ - <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */ - <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */ - <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */ - <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */ - <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */ - <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */ - <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */ - }; - }; - - i2c1_pins_a: i2c1-0 { - pins { - pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ - <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c1_pins_sleep_a: i2c1-1 { - pins { - pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ - <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ - }; - }; - - i2c1_pins_b: i2c1-2 { - pins { - pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */ - <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c1_pins_sleep_b: i2c1-3 { - pins { - pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ - <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ - }; - }; - - i2c2_pins_a: i2c2-0 { - pins { - pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ - <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_a: i2c2-1 { - pins { - pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */ - <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ - }; - }; - - i2c2_pins_b1: i2c2-2 { - pins { - pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_b1: i2c2-3 { - pins { - pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ - }; - }; - - i2c5_pins_a: i2c5-0 { - pins { - pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ - <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c5_pins_sleep_a: i2c5-1 { - pins { - pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */ - <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */ - - }; - }; - - i2s2_pins_a: i2s2-0 { - pins { - pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ - <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */ - <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - }; - - i2s2_pins_sleep_a: i2s2-1 { - pins { - pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ - <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ - <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */ - }; - }; - - ltdc_pins_a: ltdc-a-0 { - pins { - pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ - <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ - <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ - <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */ - <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */ - <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */ - <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */ - <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */ - <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */ - <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */ - <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */ - <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */ - <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */ - <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */ - <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ - <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */ - <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */ - <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */ - <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */ - <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */ - <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */ - <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */ - <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */ - <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */ - <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */ - <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */ - <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */ - <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - }; - - ltdc_pins_sleep_a: ltdc-a-1 { - pins { - pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ - <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ - <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */ - <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */ - <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */ - <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */ - <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */ - <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */ - <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */ - <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */ - <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */ - <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */ - <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */ - <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */ - <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ - <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */ - <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */ - <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */ - <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */ - <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */ - <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */ - <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */ - <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */ - <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */ - <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */ - <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */ - <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */ - <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */ - }; - }; - - ltdc_pins_b: ltdc-b-0 { - pins { - pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ - <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ - <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ - <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */ - <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */ - <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ - <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ - <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ - <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ - <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ - <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ - <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ - <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ - <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ - <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ - <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */ - <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */ - <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ - <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ - <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ - <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */ - <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */ - <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */ - <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */ - <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */ - <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ - <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ - <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - }; - - ltdc_pins_sleep_b: ltdc-b-1 { - pins { - pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */ - <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */ - <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */ - <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */ - <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */ - <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */ - <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */ - <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */ - <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */ - <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */ - <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */ - <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */ - <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */ - <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */ - <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */ - <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */ - <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */ - <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */ - <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */ - <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */ - <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */ - <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */ - <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */ - <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */ - <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */ - <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */ - <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */ - <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */ - }; - }; - - m_can1_pins_a: m-can1-0 { - pins1 { - pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */ - bias-disable; - }; - }; - - m_can1_sleep_pins_a: m_can1-sleep-0 { - pins { - pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */ - <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */ - }; - }; - - pwm1_pins_a: pwm1-0 { - pins { - pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */ - <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */ - <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm1_sleep_pins_a: pwm1-sleep-0 { - pins { - pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */ - <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */ - <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */ - }; - }; - - pwm2_pins_a: pwm2-0 { - pins { - pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm2_sleep_pins_a: pwm2-sleep-0 { - pins { - pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */ - }; - }; - - pwm3_pins_a: pwm3-0 { - pins { - pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm3_sleep_pins_a: pwm3-sleep-0 { - pins { - pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */ - }; - }; - - pwm4_pins_a: pwm4-0 { - pins { - pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */ - <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm4_sleep_pins_a: pwm4-sleep-0 { - pins { - pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */ - <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */ - }; - }; - - pwm4_pins_b: pwm4-1 { - pins { - pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm4_sleep_pins_b: pwm4-sleep-1 { - pins { - pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */ - }; - }; - - pwm5_pins_a: pwm5-0 { - pins { - pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm5_sleep_pins_a: pwm5-sleep-0 { - pins { - pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */ - }; - }; - - pwm8_pins_a: pwm8-0 { - pins { - pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm8_sleep_pins_a: pwm8-sleep-0 { - pins { - pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */ - }; - }; - - pwm12_pins_a: pwm12-0 { - pins { - pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */ - bias-pull-down; - drive-push-pull; - slew-rate = <0>; - }; - }; - - pwm12_sleep_pins_a: pwm12-sleep-0 { - pins { - pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */ - }; - }; - - qspi_clk_pins_a: qspi-clk-0 { - pins { - pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */ - bias-disable; - drive-push-pull; - slew-rate = <3>; - }; - }; - - qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { - pins { - pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ - }; - }; - - qspi_bk1_pins_a: qspi-bk1-0 { - pins1 { - pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ - <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ - <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */ - <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ - bias-pull-up; - drive-push-pull; - slew-rate = <1>; - }; - }; - - qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { - pins { - pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ - <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ - <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */ - <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */ - <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ - }; - }; - - qspi_bk2_pins_a: qspi-bk2-0 { - pins1 { - pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ - <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */ - <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */ - <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */ - bias-pull-up; - drive-push-pull; - slew-rate = <1>; - }; - }; - - qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { - pins { - pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ - <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ - <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ - <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */ - <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ - }; - }; - - sai2a_pins_a: sai2a-0 { - pins { - pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */ - <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ - <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ - <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - }; - - sai2a_sleep_pins_a: sai2a-1 { - pins { - pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ - <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ - <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ - <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */ - }; - }; - - sai2b_pins_a: sai2b-0 { - pins1 { - pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ - <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */ - <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ - bias-disable; - }; - }; - - sai2b_sleep_pins_a: sai2b-1 { - pins { - pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ - <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ - <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */ - <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */ - }; - }; - - sai2b_pins_b: sai2b-2 { - pins { - pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ - bias-disable; - }; - }; - - sai2b_sleep_pins_b: sai2b-3 { - pins { - pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ - }; - }; - - sai4a_pins_a: sai4a-0 { - pins { - pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ - slew-rate = <0>; - drive-push-pull; - bias-disable; - }; - }; - - sai4a_sleep_pins_a: sai4a-1 { - pins { - pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ - }; - }; - - sdmmc1_b4_pins_a: sdmmc1-b4-0 { - pins1 { - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ - <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ - slew-rate = <2>; - drive-push-pull; - bias-disable; - }; - }; - - sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { - pins1 { - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ - slew-rate = <2>; - drive-push-pull; - bias-disable; - }; - pins3 { - pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ - slew-rate = <1>; - drive-open-drain; - bias-disable; - }; - }; - - sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { - pins { - pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ - <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ - <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ - }; - }; - - sdmmc1_dir_pins_a: sdmmc1-dir-0 { - pins1 { - pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ - <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ - <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - pins2{ - pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ - bias-pull-up; - }; - }; - - sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { - pins { - pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ - <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ - <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ - <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ - }; - }; - - sdmmc2_b4_pins_a: sdmmc2-b4-0 { - pins1 { - pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ - <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - pins2 { - pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ - slew-rate = <2>; - drive-push-pull; - bias-pull-up; - }; - }; - - sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { - pins1 { - pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - pins2 { - pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ - slew-rate = <2>; - drive-push-pull; - bias-pull-up; - }; - pins3 { - pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ - slew-rate = <1>; - drive-open-drain; - bias-pull-up; - }; - }; - - sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { - pins { - pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ - <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ - <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ - }; - }; - - sdmmc2_b4_pins_b: sdmmc2-b4-1 { - pins1 { - pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ - <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ - slew-rate = <2>; - drive-push-pull; - bias-disable; - }; - }; - - sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 { - pins1 { - pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ - <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ - <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ - <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ - slew-rate = <1>; - drive-push-pull; - bias-disable; - }; - pins2 { - pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ - slew-rate = <2>; - drive-push-pull; - bias-disable; - }; - pins3 { - pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ - slew-rate = <1>; - drive-open-drain; - bias-disable; - }; - }; - - sdmmc2_d47_pins_a: sdmmc2-d47-0 { - pins { - pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ - <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ - <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */ - <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - }; - - sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { - pins { - pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ - <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ - <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */ - <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ - }; - }; - - sdmmc3_b4_pins_a: sdmmc3-b4-0 { - pins1 { - pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ - <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ - <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */ - <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ - <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - pins2 { - pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ - slew-rate = <2>; - drive-push-pull; - bias-pull-up; - }; - }; - - sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 { - pins1 { - pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ - <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ - <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */ - <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ - slew-rate = <1>; - drive-push-pull; - bias-pull-up; - }; - pins2 { - pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ - slew-rate = <2>; - drive-push-pull; - bias-pull-up; - }; - pins3 { - pinmux = <STM32_PINMUX('F', 1, AF9)>; /* SDMMC2_CMD */ - slew-rate = <1>; - drive-open-drain; - bias-pull-up; - }; - }; - - sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 { - pins { - pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */ - <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */ - <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */ - <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ - <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ - <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */ - }; - }; - - spdifrx_pins_a: spdifrx-0 { - pins { - pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ - bias-disable; - }; - }; - - spdifrx_sleep_pins_a: spdifrx-1 { - pins { - pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */ - }; - }; - - uart4_pins_a: uart4-0 { - pins1 { - pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ - bias-disable; - }; - }; - - uart4_pins_b: uart4-1 { - pins1 { - pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ - bias-disable; - }; - }; - - uart7_pins_a: uart7-0 { - pins1 { - pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */ - <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */ - <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */ - bias-disable; - }; - }; - }; - - pinctrl_z: pin-controller-z@54004000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32mp157-z-pinctrl"; - ranges = <0 0x54004000 0x400>; - pins-are-numbered; - interrupt-parent = <&exti>; - st,syscfg = <&exti 0x60 0xff>; - - gpioz: gpio@54004000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x400>; - clocks = <&rcc GPIOZ>; - st,bank-name = "GPIOZ"; - st,bank-ioport = <11>; - status = "disabled"; - }; - - i2c2_pins_b2: i2c2-0 { - pins { - pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c2_pins_sleep_b2: i2c2-1 { - pins { - pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ - }; - }; - - i2c4_pins_a: i2c4-0 { - pins { - pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */ - <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - i2c4_pins_sleep_a: i2c4-1 { - pins { - pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */ - <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */ - }; - }; - - spi1_pins_a: spi1-0 { - pins1 { - pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ - <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - - pins2 { - pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */ - bias-disable; - }; - }; +&pinctrl { + adc1_in6_pins_a: adc1-in6 { + pins { + pinmux = <STM32_PINMUX('F', 12, ANALOG)>; + }; + }; + + adc12_ain_pins_a: adc12-ain-0 { + pins { + pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */ + <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ + <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */ + <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */ + }; + }; + + adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */ + <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */ + }; + }; + + cec_pins_a: cec-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, AF4)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_a: cec-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */ + }; + }; + + cec_pins_b: cec-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, AF5)>; + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + cec_pins_sleep_b: cec-sleep-1 { + pins { + pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */ + }; + }; + + dac_ch1_pins_a: dac-ch1 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>; + }; + }; + + dac_ch2_pins_a: dac-ch2 { + pins { + pinmux = <STM32_PINMUX('A', 5, ANALOG)>; + }; + }; + + dcmi_pins_a: dcmi-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */ + bias-disable; + }; + }; + + dcmi_sleep_pins_a: dcmi-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */ + }; + }; + + ethernet0_rgmii_pins_a: rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */ + <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */ + }; + }; + + fmc_pins_a: fmc-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */ + <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */ + <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */ + <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */ + <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */ + bias-pull-up; + }; + }; + + fmc_sleep_pins_a: fmc-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */ + <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */ + <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */ + <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */ + <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */ + <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */ + }; + }; + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_a: i2c1-1 { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + + i2c1_pins_b: i2c1-2 { + pins { + pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_b: i2c1-3 { + pins { + pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + + i2c2_pins_a: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_a: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */ + <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + + i2c2_pins_b1: i2c2-2 { + pins { + pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b1: i2c2-3 { + pins { + pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + + i2c5_pins_a: i2c5-0 { + pins { + pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c5_pins_sleep_a: i2c5-1 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */ + + }; + }; + + i2s2_pins_a: i2s2-0 { + pins { + pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + i2s2_pins_sleep_a: i2s2-1 { + pins { + pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */ + }; + }; + + ltdc_pins_a: ltdc-a-0 { + pins { + pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_a: ltdc-a-1 { + pins { + pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */ + }; + }; + + ltdc_pins_b: ltdc-b-0 { + pins { + pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + ltdc_pins_sleep_b: ltdc-b-1 { + pins { + pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */ + <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */ + <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */ + <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */ + <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */ + <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */ + <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */ + <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */ + <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */ + <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */ + <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */ + <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */ + <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */ + <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */ + <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */ + <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */ + <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */ + <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */ + <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */ + <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */ + <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */ + <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */ + <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */ + <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */ + <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */ + <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */ + <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */ + <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */ + }; + }; + + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + + m_can1_sleep_pins_a: m_can1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */ + }; + }; + + pwm1_pins_a: pwm1-0 { + pins { + pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */ + <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */ + <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_a: pwm1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */ + <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */ + <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */ + }; + }; + + pwm2_pins_a: pwm2-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm2_sleep_pins_a: pwm2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */ + }; + }; + + pwm3_pins_a: pwm3-0 { + pins { + pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm3_sleep_pins_a: pwm3-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */ + }; + }; + + pwm4_pins_a: pwm4-0 { + pins { + pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */ + <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_a: pwm4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */ + <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */ + }; + }; + + pwm4_pins_b: pwm4-1 { + pins { + pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_b: pwm4-sleep-1 { + pins { + pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */ + }; + }; + + pwm5_pins_a: pwm5-0 { + pins { + pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm5_sleep_pins_a: pwm5-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */ + }; + }; + + pwm8_pins_a: pwm8-0 { + pins { + pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_sleep_pins_a: pwm8-sleep-0 { + pins { + pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */ + }; + }; + + pwm12_pins_a: pwm12-0 { + pins { + pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm12_sleep_pins_a: pwm12-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */ + }; + }; + + qspi_clk_pins_a: qspi-clk-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ + }; + }; + + qspi_bk1_pins_a: qspi-bk1-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */ + <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ + }; + }; + + qspi_bk2_pins_a: qspi-bk2-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */ + <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ + }; + }; + + sai2a_pins_a: sai2a-0 { + pins { + pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_a: sai2a-1 { + pins { + pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */ + }; + }; + + sai2b_pins_a: sai2b-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_a: sai2b-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ + <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */ + }; + }; + + sai2b_pins_b: sai2b-2 { + pins { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_b: sai2b-3 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ + }; + }; + + sai4a_pins_a: sai4a-0 { + pins { + pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai4a_sleep_pins_a: sai4a-1 { + pins { + pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ + }; + }; + + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + + sdmmc2_b4_pins_a: sdmmc2-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ + }; + }; + + sdmmc2_b4_pins_b: sdmmc2-b4-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-disable; + }; + pins3 { + pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc2_d47_pins_a: sdmmc2-d47-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + + sdmmc3_b4_pins_a: sdmmc3-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ + <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */ + <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + pins3 { + pinmux = <STM32_PINMUX('F', 1, AF9)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */ + }; + }; + + spdifrx_pins_a: spdifrx-0 { + pins { + pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */ + bias-disable; + }; + }; + + spdifrx_sleep_pins_a: spdifrx-1 { + pins { + pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */ + }; + }; + + uart4_pins_a: uart4-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_pins_b: uart4-1 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart7_pins_a: uart7-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */ + <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */ + <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */ + bias-disable; + }; + }; +}; + +&pinctrl_z { + i2c2_pins_b2: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b2: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ + }; + }; + + i2c4_pins_a: i2c4-0 { + pins { + pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c4_pins_sleep_a: i2c4-1 { + pins { + pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */ + <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */ + }; + }; + + spi1_pins_a: spi1-0 { + pins1 { + pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */ + bias-disable; }; }; }; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index d3a9791a0fda..ce641c4359cf 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -1572,6 +1572,163 @@ #size-cells = <0>; status = "disabled"; }; + + /* + * Break node order to solve dependency probe issue between + * pinctrl and exti. + */ + pinctrl: pin-controller@50002000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-pinctrl"; + ranges = <0 0x50002000 0xa400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + pins-are-numbered; + + gpioa: gpio@50002000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc GPIOA>; + st,bank-name = "GPIOA"; + status = "disabled"; + }; + + gpiob: gpio@50003000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc GPIOB>; + st,bank-name = "GPIOB"; + status = "disabled"; + }; + + gpioc: gpio@50004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc GPIOC>; + st,bank-name = "GPIOC"; + status = "disabled"; + }; + + gpiod: gpio@50005000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x400>; + clocks = <&rcc GPIOD>; + st,bank-name = "GPIOD"; + status = "disabled"; + }; + + gpioe: gpio@50006000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x400>; + clocks = <&rcc GPIOE>; + st,bank-name = "GPIOE"; + status = "disabled"; + }; + + gpiof: gpio@50007000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x400>; + clocks = <&rcc GPIOF>; + st,bank-name = "GPIOF"; + status = "disabled"; + }; + + gpiog: gpio@50008000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x400>; + clocks = <&rcc GPIOG>; + st,bank-name = "GPIOG"; + status = "disabled"; + }; + + gpioh: gpio@50009000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x400>; + clocks = <&rcc GPIOH>; + st,bank-name = "GPIOH"; + status = "disabled"; + }; + + gpioi: gpio@5000a000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x400>; + clocks = <&rcc GPIOI>; + st,bank-name = "GPIOI"; + status = "disabled"; + }; + + gpioj: gpio@5000b000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x400>; + clocks = <&rcc GPIOJ>; + st,bank-name = "GPIOJ"; + status = "disabled"; + }; + + gpiok: gpio@5000c000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0xa000 0x400>; + clocks = <&rcc GPIOK>; + st,bank-name = "GPIOK"; + status = "disabled"; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32mp157-z-pinctrl"; + ranges = <0 0x54004000 0x400>; + pins-are-numbered; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; + + gpioz: gpio@54004000 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x400>; + clocks = <&rcc GPIOZ>; + st,bank-name = "GPIOZ"; + st,bank-ioport = <11>; + status = "disabled"; + }; + }; }; mlahb { -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/6] ARM: dts: stm32: Update stm32mp157 pinctrl files 2019-11-20 14:41 [PATCH 0/6] STM32 DT: Updates for SOC diversity Alexandre Torgue 2019-11-20 14:41 ` [PATCH 1/6] ARM: dts: stm32: Adapt stm32mp157 pinctrl to manage STM32MP15xx SOCs family Alexandre Torgue @ 2019-11-20 14:41 ` Alexandre Torgue 2019-11-20 14:41 ` [PATCH 3/6] ARM: dts: stm32: Introduce new STM32MP15 SOCs: STM32MP151 and STM32MP153 Alexandre Torgue ` (4 subsequent siblings) 6 siblings, 0 replies; 10+ messages in thread From: Alexandre Torgue @ 2019-11-20 14:41 UTC (permalink / raw) To: Maxime Coquelin, arnd, robh+dt, mark.rutland Cc: linux-arm-kernel, devicetree, Alexandre Torgue, linux-stm32, linux-kernel, Manivannan Sadhasivam In order to cover the STM32MP15 SOCs family this commit updates pinctrl file names (group definition and packages files). This family includes: STM32MP151, STM32MP153 and STM32MP157. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi similarity index 100% rename from arch/arm/boot/dts/stm32mp157-pinctrl.dtsi rename to arch/arm/boot/dts/stm32mp15-pinctrl.dtsi diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index 628c74a45a25..2f6dd51e8506 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -7,7 +7,8 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157xac-pinctrl.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 2f9f8cf94b02..7ee7b4d13d39 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -7,7 +7,8 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157xac-pinctrl.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 341fb6064447..e5d8da01aaef 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -6,7 +6,8 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157xaa-pinctrl.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> diff --git a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi deleted file mode 100644 index 875adf5e1e30..000000000000 --- a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AA>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - }; - - gpioi: gpio@5000a000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 128 16>; - }; - - gpioj: gpio@5000b000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 144 16>; - }; - - gpiok: gpio@5000c000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl 0 160 8>; - }; - }; - - pinctrl_z: pin-controller-z@54004000 { - st,package = <STM32MP_PKG_AA>; - - gpioz: gpio@54004000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi deleted file mode 100644 index 961fa12a59c3..000000000000 --- a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AB>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <6>; - gpio-ranges = <&pinctrl 6 86 6>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <10>; - gpio-ranges = <&pinctrl 6 102 10>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <2>; - gpio-ranges = <&pinctrl 0 112 2>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi deleted file mode 100644 index 26600f188d25..000000000000 --- a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AC>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; - }; - - gpioi: gpio@5000a000 { - status = "okay"; - ngpios = <12>; - gpio-ranges = <&pinctrl 0 128 12>; - }; - }; - - pinctrl_z: pin-controller-z@54004000 { - st,package = <STM32MP_PKG_AC>; - - gpioz: gpio@54004000 { - status = "okay"; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi deleted file mode 100644 index 910113f3e69a..000000000000 --- a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (C) STMicroelectronics 2019 - All Rights Reserved - * Author: Alexandre Torgue <alexandre.torgue@st.com> - */ - -#include "stm32mp157-pinctrl.dtsi" -/ { - soc { - pinctrl: pin-controller@50002000 { - st,package = <STM32MP_PKG_AD>; - - gpioa: gpio@50002000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; - }; - - gpiob: gpio@50003000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; - }; - - gpioc: gpio@50004000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; - }; - - gpiod: gpio@50005000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; - }; - - gpioe: gpio@50006000 { - status = "okay"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; - }; - - gpiof: gpio@50007000 { - status = "okay"; - ngpios = <6>; - gpio-ranges = <&pinctrl 6 86 6>; - }; - - gpiog: gpio@50008000 { - status = "okay"; - ngpios = <10>; - gpio-ranges = <&pinctrl 6 102 10>; - }; - - gpioh: gpio@50009000 { - status = "okay"; - ngpios = <2>; - gpio-ranges = <&pinctrl 0 112 2>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi new file mode 100644 index 000000000000..04f7a43ad66f --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AA>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@5000b000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@5000c000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; +}; + +&pinctrl_z { + st,package = <STM32MP_PKG_AA>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi new file mode 100644 index 000000000000..328dad140e9b --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AB>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi new file mode 100644 index 000000000000..7eaa245f44db --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AC>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; +}; + +&pinctrl_z { + st,package = <STM32MP_PKG_AC>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi new file mode 100644 index 000000000000..b63e207de216 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +&pinctrl { + st,package = <STM32MP_PKG_AD>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 3/6] ARM: dts: stm32: Introduce new STM32MP15 SOCs: STM32MP151 and STM32MP153 2019-11-20 14:41 [PATCH 0/6] STM32 DT: Updates for SOC diversity Alexandre Torgue 2019-11-20 14:41 ` [PATCH 1/6] ARM: dts: stm32: Adapt stm32mp157 pinctrl to manage STM32MP15xx SOCs family Alexandre Torgue 2019-11-20 14:41 ` [PATCH 2/6] ARM: dts: stm32: Update stm32mp157 pinctrl files Alexandre Torgue @ 2019-11-20 14:41 ` Alexandre Torgue 2019-11-20 14:41 ` [PATCH 4/6] ARM: dts: stm32: Manage security diversity for STM32M15x SOCs Alexandre Torgue ` (3 subsequent siblings) 6 siblings, 0 replies; 10+ messages in thread From: Alexandre Torgue @ 2019-11-20 14:41 UTC (permalink / raw) To: Maxime Coquelin, arnd, robh+dt, mark.rutland Cc: linux-arm-kernel, devicetree, Alexandre Torgue, linux-stm32, linux-kernel, Manivannan Sadhasivam STM32MP151 and STM32MP153 were not explicitly supported through stm32mp157c.dts. This commit adds dedicated files to support all STM32MP15 SOCs family. The differences between those SOCs are: -STM32MP151 [1]: common file. -STM32MP153 [2]: STM32MP151 + CANs + a second CortexA7-CPU. -STM32MP157 [3]: STM32MP153 + DSI + GPU. [1] https://www.st.com/resource/en/reference_manual/dm00366349.pdf [2] https://www.st.com/resource/en/reference_manual/dm00366355.pdf [3] https://www.st.com/resource/en/reference_manual/dm00327659.pdf Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi similarity index 96% rename from arch/arm/boot/dts/stm32mp157c.dtsi rename to arch/arm/boot/dts/stm32mp151.dtsi index ce641c4359cf..9a0b55be134d 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -20,12 +20,6 @@ device_type = "cpu"; reg = <0>; }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <1>; - }; }; psci { @@ -953,32 +947,6 @@ }; }; - m_can1: can@4400e000 { - compatible = "bosch,m_can"; - reg = <0x4400e000 0x400>, <0x44011000 0x1400>; - reg-names = "m_can", "message_ram"; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; - status = "disabled"; - }; - - m_can2: can@4400f000 { - compatible = "bosch,m_can"; - reg = <0x4400f000 0x400>, <0x44011000 0x2800>; - reg-names = "m_can", "message_ram"; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "int0", "int1"; - clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; - clock-names = "hclk", "cclk"; - bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; - status = "disabled"; - }; - dma1: dma@48000000 { compatible = "st,stm32-dma"; reg = <0x48000000 0x400>; @@ -1444,26 +1412,6 @@ status = "disabled"; }; - gpu: gpu@59000000 { - compatible = "vivante,gc"; - reg = <0x59000000 0x800>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc GPU>, <&rcc GPU_K>; - clock-names = "bus" ,"core"; - resets = <&rcc GPU_R>; - status = "disabled"; - }; - - dsi: dsi@5a000000 { - compatible = "st,stm32-dsi"; - reg = <0x5a000000 0x800>; - clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; - clock-names = "pclk", "ref", "px_clk"; - resets = <&rcc DSI_R>; - reset-names = "apb"; - status = "disabled"; - }; - ltdc: display-controller@5a001000 { compatible = "st,stm32-ltdc"; reg = <0x5a001000 0x400>; diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi new file mode 100644 index 000000000000..2d759fc6015c --- /dev/null +++ b/arch/arm/boot/dts/stm32mp153.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include "stm32mp151.dtsi" + +/ { + cpus { + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + soc { + m_can1: can@4400e000 { + compatible = "bosch,m_can"; + reg = <0x4400e000 0x400>, <0x44011000 0x1400>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + status = "disabled"; + }; + + m_can2: can@4400f000 { + compatible = "bosch,m_can"; + reg = <0x4400f000 0x400>, <0x44011000 0x2800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; + clock-names = "hclk", "cclk"; + bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157.dtsi b/arch/arm/boot/dts/stm32mp157.dtsi new file mode 100644 index 000000000000..3f0a4a91cce6 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include "stm32mp153.dtsi" + +/ { + soc { + gpu: gpu@59000000 { + compatible = "vivante,gc"; + reg = <0x59000000 0x800>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc GPU>, <&rcc GPU_K>; + clock-names = "bus" ,"core"; + resets = <&rcc GPU_R>; + status = "disabled"; + }; + + dsi: dsi@5a000000 { + compatible = "st,stm32-dsi"; + reg = <0x5a000000 0x800>; + clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>; + clock-names = "pclk", "ref", "px_clk"; + resets = <&rcc DSI_R>; + reset-names = "apb"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index 2f6dd51e8506..cbfa4075907e 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -6,7 +6,7 @@ /dts-v1/; -#include "stm32mp157c.dtsi" +#include "stm32mp157.dtsi" #include "stm32mp15-pinctrl.dtsi" #include "stm32mp15xxac-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 7ee7b4d13d39..3f869bd67082 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -6,7 +6,7 @@ /dts-v1/; -#include "stm32mp157c.dtsi" +#include "stm32mp157.dtsi" #include "stm32mp15-pinctrl.dtsi" #include "stm32mp15xxac-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index e5d8da01aaef..975f69ea4eed 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -5,7 +5,7 @@ */ /dts-v1/; -#include "stm32mp157c.dtsi" +#include "stm32mp157.dtsi" #include "stm32mp15-pinctrl.dtsi" #include "stm32mp15xxaa-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 4/6] ARM: dts: stm32: Manage security diversity for STM32M15x SOCs 2019-11-20 14:41 [PATCH 0/6] STM32 DT: Updates for SOC diversity Alexandre Torgue ` (2 preceding siblings ...) 2019-11-20 14:41 ` [PATCH 3/6] ARM: dts: stm32: Introduce new STM32MP15 SOCs: STM32MP151 and STM32MP153 Alexandre Torgue @ 2019-11-20 14:41 ` Alexandre Torgue 2019-11-20 14:41 ` [PATCH 5/6] ARM: dts: stm32: Adapt STM32MP157 DK boards to stm32 DT diversity Alexandre Torgue ` (2 subsequent siblings) 6 siblings, 0 replies; 10+ messages in thread From: Alexandre Torgue @ 2019-11-20 14:41 UTC (permalink / raw) To: Maxime Coquelin, arnd, robh+dt, mark.rutland Cc: linux-arm-kernel, devicetree, Alexandre Torgue, linux-stm32, linux-kernel, Manivannan Sadhasivam This commit creates a new file to manage security diversity on STM32MP15x SOCs. On STM32MP15xY, "Y" gives information: -Y = A means no cryp IP and no secure boot. -Y = C means cryp IP + secure boot. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 9a0b55be134d..072fc7025987 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1255,15 +1255,6 @@ status = "disabled"; }; - cryp1: cryp@54001000 { - compatible = "st,stm32mp1-cryp"; - reg = <0x54001000 0x400>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&rcc CRYP1>; - resets = <&rcc CRYP1_R>; - status = "disabled"; - }; - hash1: hash@54002000 { compatible = "st,stm32f756-hash"; reg = <0x54002000 0x400>; diff --git a/arch/arm/boot/dts/stm32mp15xc.dtsi b/arch/arm/boot/dts/stm32mp15xc.dtsi new file mode 100644 index 000000000000..b06a55a2fa18 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xc.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +/ { + soc { + cryp1: cryp@54001000 { + compatible = "st,stm32mp1-cryp"; + reg = <0x54001000 0x400>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc CRYP1>; + resets = <&rcc CRYP1_R>; + status = "disabled"; + }; + }; +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 5/6] ARM: dts: stm32: Adapt STM32MP157 DK boards to stm32 DT diversity 2019-11-20 14:41 [PATCH 0/6] STM32 DT: Updates for SOC diversity Alexandre Torgue ` (3 preceding siblings ...) 2019-11-20 14:41 ` [PATCH 4/6] ARM: dts: stm32: Manage security diversity for STM32M15x SOCs Alexandre Torgue @ 2019-11-20 14:41 ` Alexandre Torgue 2019-11-29 14:20 ` Arnd Bergmann 2019-11-20 14:41 ` [PATCH 6/6] ARM: dts: stm32: Adapt STM32MP157C ED1 board to STM32 " Alexandre Torgue 2019-11-20 15:04 ` [PATCH 0/6] STM32 DT: Updates for SOC diversity Alexandre Torgue 6 siblings, 1 reply; 10+ messages in thread From: Alexandre Torgue @ 2019-11-20 14:41 UTC (permalink / raw) To: Maxime Coquelin, arnd, robh+dt, mark.rutland Cc: linux-arm-kernel, devicetree, Alexandre Torgue, linux-stm32, linux-kernel, Manivannan Sadhasivam To handle STM32MP15 SOCs diversity, some updates have to been done. This commit mainly adapt dk1 board to include the correct package and the correct SOC version. A new file has been created to factorize common parts. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 3f869bd67082..1292ac3b6890 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -9,606 +9,9 @@ #include "stm32mp157.dtsi" #include "stm32mp15-pinctrl.dtsi" #include "stm32mp15xxac-pinctrl.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/mfd/st,stpmic1.h> +#include "stm32mp15xx-dkx.dtsi" / { model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; compatible = "st,stm32mp157a-dk1", "st,stm32mp157"; - - aliases { - ethernet0 = ðernet0; - serial0 = &uart4; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@c0000000 { - device_type = "memory"; - reg = <0xc0000000 0x20000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mcuram2: mcuram2@10000000 { - compatible = "shared-dma-pool"; - reg = <0x10000000 0x40000>; - no-map; - }; - - vdev0vring0: vdev0vring0@10040000 { - compatible = "shared-dma-pool"; - reg = <0x10040000 0x1000>; - no-map; - }; - - vdev0vring1: vdev0vring1@10041000 { - compatible = "shared-dma-pool"; - reg = <0x10041000 0x1000>; - no-map; - }; - - vdev0buffer: vdev0buffer@10042000 { - compatible = "shared-dma-pool"; - reg = <0x10042000 0x4000>; - no-map; - }; - - mcuram: mcuram@30000000 { - compatible = "shared-dma-pool"; - reg = <0x30000000 0x40000>; - no-map; - }; - - retram: retram@38000000 { - compatible = "shared-dma-pool"; - reg = <0x38000000 0x10000>; - no-map; - }; - - gpu_reserved: gpu@d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; - }; - - led { - compatible = "gpio-leds"; - blue { - label = "heartbeat"; - gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - }; - - sound { - compatible = "audio-graph-card"; - label = "STM32MP1-DK"; - routing = - "Playback" , "MCLK", - "Capture" , "MCLK", - "MICL" , "Mic Bias"; - dais = <&sai2a_port &sai2b_port &i2s2_port>; - status = "okay"; - }; -}; - -&adc { - pinctrl-names = "default"; - pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; - vdd-supply = <&vdd>; - vdda-supply = <&vdd>; - vref-supply = <&vrefbuf>; - status = "disabled"; - adc1: adc@0 { - /* - * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. - * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: - * 5 * (56 + 47kOhms) * 5pF => 2.5us. - * Use arbitrary margin here (e.g. 5us). - */ - st,min-sample-time-nsecs = <5000>; - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 6 13 18 19>; - status = "okay"; - }; - adc2: adc@100 { - /* AIN connector, USB Type-C CC1 & CC2 */ - st,adc-channels = <0 1 2 6 18 19>; - st,min-sample-time-nsecs = <5000>; - status = "okay"; - }; -}; - -&cec { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cec_pins_b>; - pinctrl-1 = <&cec_pins_sleep_b>; - status = "okay"; -}; - -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rgmii_pins_a>; - pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rgmii-id"; - max-speed = <1000>; - phy-handle = <&phy0>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; -}; - -&gpu { - contiguous-area = <&gpu_reserved>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_pins_a>; - pinctrl-1 = <&i2c1_pins_sleep_a>; - i2c-scl-rising-time-ns = <100>; - i2c-scl-falling-time-ns = <7>; - status = "okay"; - /delete-property/dmas; - /delete-property/dma-names; - - hdmi-transmitter@39 { - compatible = "sil,sii9022"; - reg = <0x39>; - iovcc-supply = <&v3v3_hdmi>; - cvcc12-supply = <&v1v2_hdmi>; - reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpiog>; - #sound-dai-cells = <0>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - sii9022_in: endpoint { - remote-endpoint = <<dc_ep0_out>; - }; - }; - - port@3 { - reg = <3>; - sii9022_tx_endpoint: endpoint { - remote-endpoint = <&i2s2_endpoint>; - }; - }; - }; - }; - - cs42l51: cs42l51@4a { - compatible = "cirrus,cs42l51"; - reg = <0x4a>; - #sound-dai-cells = <0>; - VL-supply = <&v3v3>; - VD-supply = <&v1v8_audio>; - VA-supply = <&v1v8_audio>; - VAHP-supply = <&v1v8_audio>; - reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; - clocks = <&sai2a>; - clock-names = "MCLK"; - status = "okay"; - - cs42l51_port: port { - #address-cells = <1>; - #size-cells = <0>; - - cs42l51_tx_endpoint: endpoint@0 { - reg = <0>; - remote-endpoint = <&sai2a_endpoint>; - frame-master; - bitclock-master; - }; - - cs42l51_rx_endpoint: endpoint@1 { - reg = <1>; - remote-endpoint = <&sai2b_endpoint>; - frame-master; - bitclock-master; - }; - }; - }; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; - - pmic: stpmic@33 { - compatible = "st,stpmic1"; - reg = <0x33>; - interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - status = "okay"; - - regulators { - compatible = "st,stpmic1-regulators"; - ldo1-supply = <&v3v3>; - ldo3-supply = <&vdd_ddr>; - ldo6-supply = <&v3v3>; - pwr_sw1-supply = <&bst_out>; - pwr_sw2-supply = <&bst_out>; - - vddcore: buck1 { - regulator-name = "vddcore"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd_ddr: buck2 { - regulator-name = "vdd_ddr"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - vdd: buck3 { - regulator-name = "vdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - st,mask-reset; - regulator-initial-mode = <0>; - regulator-over-current-protection; - }; - - v3v3: buck4 { - regulator-name = "v3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-over-current-protection; - regulator-initial-mode = <0>; - }; - - v1v8_audio: ldo1 { - regulator-name = "v1v8_audio"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO1 0>; - }; - - v3v3_hdmi: ldo2 { - regulator-name = "v3v3_hdmi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO2 0>; - }; - - vtt_ddr: ldo3 { - regulator-name = "vtt_ddr"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <750000>; - regulator-always-on; - regulator-over-current-protection; - }; - - vdd_usb: ldo4 { - regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - interrupts = <IT_CURLIM_LDO4 0>; - }; - - vdda: ldo5 { - regulator-name = "vdda"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - interrupts = <IT_CURLIM_LDO5 0>; - regulator-boot-on; - }; - - v1v2_hdmi: ldo6 { - regulator-name = "v1v2_hdmi"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - interrupts = <IT_CURLIM_LDO6 0>; - }; - - vref_ddr: vref_ddr { - regulator-name = "vref_ddr"; - regulator-always-on; - regulator-over-current-protection; - }; - - bst_out: boost { - regulator-name = "bst_out"; - interrupts = <IT_OCP_BOOST 0>; - }; - - vbus_otg: pwr_sw1 { - regulator-name = "vbus_otg"; - interrupts = <IT_OCP_OTG 0>; - }; - - vbus_sw: pwr_sw2 { - regulator-name = "vbus_sw"; - interrupts = <IT_OCP_SWOUT 0>; - regulator-active-discharge = <1>; - }; - }; - - onkey { - compatible = "st,stpmic1-onkey"; - interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; - interrupt-names = "onkey-falling", "onkey-rising"; - power-off-time-sec = <10>; - status = "okay"; - }; - - watchdog { - compatible = "st,stpmic1-wdt"; - status = "disabled"; - }; - }; -}; - -&i2s2 { - clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; - clock-names = "pclk", "i2sclk", "x8k", "x11k"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2s2_pins_a>; - pinctrl-1 = <&i2s2_pins_sleep_a>; - status = "okay"; - - i2s2_port: port { - i2s2_endpoint: endpoint { - remote-endpoint = <&sii9022_tx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - }; - }; -}; - -&ipcc { - status = "okay"; -}; - -&iwdg2 { - timeout-sec = <32>; - status = "okay"; -}; - -<dc { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <<dc_pins_a>; - pinctrl-1 = <<dc_pins_sleep_a>; - status = "okay"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - ltdc_ep0_out: endpoint@0 { - reg = <0>; - remote-endpoint = <&sii9022_in>; - }; - }; -}; - -&m4_rproc { - memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, - <&vdev0vring1>, <&vdev0buffer>; - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; - mbox-names = "vq0", "vq1", "shutdown"; - interrupt-parent = <&exti>; - interrupts = <68 1>; - status = "okay"; -}; - -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - -&rng1 { - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&sai2 { - clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; - clock-names = "pclk", "x8k", "x11k"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; - pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; - status = "okay"; - - sai2a: audio-controller@4400b004 { - #clock-cells = <0>; - dma-names = "tx"; - clocks = <&rcc SAI2_K>; - clock-names = "sai_ck"; - status = "okay"; - - sai2a_port: port { - sai2a_endpoint: endpoint { - remote-endpoint = <&cs42l51_tx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - }; - }; - - sai2b: audio-controller@4400b024 { - dma-names = "rx"; - st,sync = <&sai2a 2>; - clocks = <&rcc SAI2_K>, <&sai2a>; - clock-names = "sai_ck", "MCLK"; - status = "okay"; - - sai2b_port: port { - sai2b_endpoint: endpoint { - remote-endpoint = <&cs42l51_rx_endpoint>; - format = "i2s"; - mclk-fs = <256>; - dai-tdm-slot-num = <2>; - dai-tdm-slot-width = <32>; - }; - }; - }; -}; - -&sdmmc1 { - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc1_b4_pins_a>; - pinctrl-1 = <&sdmmc1_b4_od_pins_a>; - pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; - st,neg-edge; - bus-width = <4>; - vmmc-supply = <&v3v3>; - status = "okay"; -}; - -&sdmmc3 { - pinctrl-names = "default", "opendrain", "sleep"; - pinctrl-0 = <&sdmmc3_b4_pins_a>; - pinctrl-1 = <&sdmmc3_b4_od_pins_a>; - pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; - broken-cd; - st,neg-edge; - bus-width = <4>; - vmmc-supply = <&v3v3>; - status = "disabled"; -}; - -&timers1 { - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - pwm { - pinctrl-0 = <&pwm1_pins_a>; - pinctrl-1 = <&pwm1_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@0 { - status = "okay"; - }; -}; - -&timers3 { - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - pwm { - pinctrl-0 = <&pwm3_pins_a>; - pinctrl-1 = <&pwm3_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@2 { - status = "okay"; - }; -}; - -&timers4 { - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - pwm { - pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>; - pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@3 { - status = "okay"; - }; -}; - -&timers5 { - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - pwm { - pinctrl-0 = <&pwm5_pins_a>; - pinctrl-1 = <&pwm5_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@4 { - status = "okay"; - }; -}; - -&timers6 { - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - timer@5 { - status = "okay"; - }; -}; - -&timers12 { - /delete-property/dmas; - /delete-property/dma-names; - status = "disabled"; - pwm { - pinctrl-0 = <&pwm12_pins_a>; - pinctrl-1 = <&pwm12_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - status = "okay"; - }; - timer@11 { - status = "okay"; - }; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; -}; - -&vrefbuf { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - vdda-supply = <&vdd>; - status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index d26adcbeba33..f889692b16b9 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -6,7 +6,11 @@ /dts-v1/; -#include "stm32mp157a-dk1.dts" +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp15xx-dkx.dtsi" / { model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi new file mode 100644 index 000000000000..28efbccc61ce --- /dev/null +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -0,0 +1,606 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + + led { + compatible = "gpio-leds"; + blue { + label = "heartbeat"; + gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP1-DK"; + routing = + "Playback" , "MCLK", + "Capture" , "MCLK", + "MICL" , "Mic Bias"; + dais = <&sai2a_port &sai2b_port &i2s2_port>; + status = "okay"; + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>; + vdd-supply = <&vdd>; + vdda-supply = <&vdd>; + vref-supply = <&vrefbuf>; + status = "disabled"; + adc1: adc@0 { + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (56 + 47kOhms) * 5pF => 2.5us. + * Use arbitrary margin here (e.g. 5us). + */ + st,min-sample-time-nsecs = <5000>; + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 6 13 18 19>; + status = "okay"; + }; + adc2: adc@100 { + /* AIN connector, USB Type-C CC1 & CC2 */ + st,adc-channels = <0 1 2 6 18 19>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cec_pins_b>; + pinctrl-1 = <&cec_pins_sleep_b>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_pins_sleep_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + hdmi-transmitter@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiog>; + #sound-dai-cells = <0>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sii9022_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port@3 { + reg = <3>; + sii9022_tx_endpoint: endpoint { + remote-endpoint = <&i2s2_endpoint>; + }; + }; + }; + }; + + cs42l51: cs42l51@4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + #sound-dai-cells = <0>; + VL-supply = <&v3v3>; + VD-supply = <&v1v8_audio>; + VA-supply = <&v1v8_audio>; + VAHP-supply = <&v1v8_audio>; + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + clocks = <&sai2a>; + clock-names = "MCLK"; + status = "okay"; + + cs42l51_port: port { + #address-cells = <1>; + #size-cells = <0>; + + cs42l51_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + + cs42l51_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + }; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&i2s2 { + clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2s2_pins_a>; + pinctrl-1 = <&i2s2_pins_sleep_a>; + status = "okay"; + + i2s2_port: port { + i2s2_endpoint: endpoint { + remote-endpoint = <&sii9022_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_a>; + pinctrl-1 = <<dc_pins_sleep_a>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&sii9022_in>; + }; + }; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&cs42l51_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; + + sai2b: audio-controller@4400b024 { + dma-names = "rx"; + st,sync = <&sai2a 2>; + clocks = <&rcc SAI2_K>, <&sai2a>; + clock-names = "sai_ck", "MCLK"; + status = "okay"; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&cs42l51_rx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "disabled"; +}; + +&timers1 { + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm1_pins_a>; + pinctrl-1 = <&pwm1_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@0 { + status = "okay"; + }; +}; + +&timers3 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm3_pins_a>; + pinctrl-1 = <&pwm3_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@2 { + status = "okay"; + }; +}; + +&timers4 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>; + pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@3 { + status = "okay"; + }; +}; + +&timers5 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@4 { + status = "okay"; + }; +}; + +&timers6 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + timer@5 { + status = "okay"; + }; +}; + +&timers12 { + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; + pwm { + pinctrl-0 = <&pwm12_pins_a>; + pinctrl-1 = <&pwm12_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@11 { + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 5/6] ARM: dts: stm32: Adapt STM32MP157 DK boards to stm32 DT diversity 2019-11-20 14:41 ` [PATCH 5/6] ARM: dts: stm32: Adapt STM32MP157 DK boards to stm32 DT diversity Alexandre Torgue @ 2019-11-29 14:20 ` Arnd Bergmann 2019-11-29 14:51 ` Alexandre Torgue 0 siblings, 1 reply; 10+ messages in thread From: Arnd Bergmann @ 2019-11-29 14:20 UTC (permalink / raw) To: Alexandre Torgue Cc: Maxime Coquelin, Rob Herring, Mark Rutland, Linux ARM, DTML, linux-stm32, linux-kernel, Manivannan Sadhasivam On Wed, Nov 20, 2019 at 3:41 PM Alexandre Torgue <alexandre.torgue@st.com> wrote: > > To handle STM32MP15 SOCs diversity, some updates have to been done. > This commit mainly adapt dk1 board to include the correct package and the > correct SOC version. A new file has been created to factorize common parts. > > Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> > > diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts > index 3f869bd67082..1292ac3b6890 100644 > --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts > +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts > model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; > compatible = "st,stm32mp157a-dk1", "st,stm32mp157"; > - > - aliases { > - ethernet0 = ðernet0; > - serial0 = &uart4; > - }; > - > - chosen { > - stdout-path = "serial0:115200n8"; > - }; > - As a rule, I would leave aliases and chosen nodes in the .dts file and not move them into a shared .dtsi, since they tend to be board specific. (even if that may not be the case in this particular file) Arnd ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 5/6] ARM: dts: stm32: Adapt STM32MP157 DK boards to stm32 DT diversity 2019-11-29 14:20 ` Arnd Bergmann @ 2019-11-29 14:51 ` Alexandre Torgue 0 siblings, 0 replies; 10+ messages in thread From: Alexandre Torgue @ 2019-11-29 14:51 UTC (permalink / raw) To: Arnd Bergmann Cc: Maxime Coquelin, Rob Herring, Mark Rutland, Linux ARM, DTML, linux-stm32, linux-kernel, Manivannan Sadhasivam On 11/29/19 3:20 PM, Arnd Bergmann wrote: > On Wed, Nov 20, 2019 at 3:41 PM Alexandre Torgue > <alexandre.torgue@st.com> wrote: >> >> To handle STM32MP15 SOCs diversity, some updates have to been done. >> This commit mainly adapt dk1 board to include the correct package and the >> correct SOC version. A new file has been created to factorize common parts. >> >> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> >> >> diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts >> index 3f869bd67082..1292ac3b6890 100644 >> --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts >> +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts >> model = "STMicroelectronics STM32MP157A-DK1 Discovery Board"; >> compatible = "st,stm32mp157a-dk1", "st,stm32mp157"; >> - >> - aliases { >> - ethernet0 = ðernet0; >> - serial0 = &uart4; >> - }; >> - >> - chosen { >> - stdout-path = "serial0:115200n8"; >> - }; >> - > > As a rule, I would leave aliases and chosen nodes in the .dts file and not > move them into a shared .dtsi, since they tend to be board specific. > > (even if that may not be the case in this particular file) I agree, I'll move them in V2. Thanks Alex > > Arnd > ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 6/6] ARM: dts: stm32: Adapt STM32MP157C ED1 board to STM32 DT diversity 2019-11-20 14:41 [PATCH 0/6] STM32 DT: Updates for SOC diversity Alexandre Torgue ` (4 preceding siblings ...) 2019-11-20 14:41 ` [PATCH 5/6] ARM: dts: stm32: Adapt STM32MP157 DK boards to stm32 DT diversity Alexandre Torgue @ 2019-11-20 14:41 ` Alexandre Torgue 2019-11-20 15:04 ` [PATCH 0/6] STM32 DT: Updates for SOC diversity Alexandre Torgue 6 siblings, 0 replies; 10+ messages in thread From: Alexandre Torgue @ 2019-11-20 14:41 UTC (permalink / raw) To: Maxime Coquelin, arnd, robh+dt, mark.rutland Cc: linux-arm-kernel, devicetree, Alexandre Torgue, linux-stm32, linux-kernel, Manivannan Sadhasivam This commit adds security (cryp1) IP to stm32mp157c ED1 board by including stm32mp15xc.dtsi file. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 975f69ea4eed..1fc43251d697 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" #include "stm32mp15-pinctrl.dtsi" #include "stm32mp15xxaa-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 0/6] STM32 DT: Updates for SOC diversity 2019-11-20 14:41 [PATCH 0/6] STM32 DT: Updates for SOC diversity Alexandre Torgue ` (5 preceding siblings ...) 2019-11-20 14:41 ` [PATCH 6/6] ARM: dts: stm32: Adapt STM32MP157C ED1 board to STM32 " Alexandre Torgue @ 2019-11-20 15:04 ` Alexandre Torgue 6 siblings, 0 replies; 10+ messages in thread From: Alexandre Torgue @ 2019-11-20 15:04 UTC (permalink / raw) To: Maxime Coquelin, arnd, robh+dt, mark.rutland Cc: linux-arm-kernel, devicetree, linux-stm32, linux-kernel, Manivannan Sadhasivam On 11/20/19 3:41 PM, Alexandre Torgue wrote: > This series updates stm32mp device tree files in order to handle the STM32MP15 > part numbers diversity. STM32MP15 part numbers are built in this way: > > -STM32MP15X: X = [1, 3, 7] for IPs diversity: > -STM32MP151 = basic part > -STM32MP153 = STM32MP153 + a second CPU A7 + MCAN(x2) Sorry for typo: -STM32MP153 = STM32MP151 + a second CPU A7 + MCAN(x2) > -STM32MP157 = STM32MP153 + DSI + GPU > > -STMM32MP15xY: Y = [a, c] for security diversity: > -STM32MP15xA: basic part. > -STM32MP15xC: adds crypto IP. > > -STM32MP15xxZZ: ZZ = [aa, ab, ac, ad] for packages (IO) diversity: > -STM32MP15xxAA: TFBGA448 18x18 > -STM32MP15xxAB: LFBGA354 16x16 > -STM32MP15xxAC: TFBGA361 12x12 > -STM32MP15xxAD: TFBGA257 10x10 > > New device tree files are created and some existing are renamed to match with > this split. > > In this way it is easy to assemble (by inclusion) those files to match with the > SOC partnumber used on board, and then it's simpler for users to create their > own device tree board file using the correct SOC. > > For more details: > > See STM32MP151 [1], STM32MP153 [2], STM32MP157 [3] reference manuals: > [1] https://www.st.com/resource/en/reference_manual/dm00366349.pdf > [2] https://www.st.com/resource/en/reference_manual/dm00366355.pdf > [3] https://www.st.com/resource/en/reference_manual/dm00327659.pdf > > Product family: > https://www.st.com/en/microcontrollers-microprocessors/stm32-arm-cortex-mpus.html#products > > regards > Alex > > Alexandre Torgue (6): > ARM: dts: stm32: Adapt stm32mp157 pinctrl to manage STM32MP15xx SOCs > family > ARM: dts: stm32: Update stm32mp157 pinctrl files > ARM: dts: stm32: Introduce new STM32MP15 SOCs: STM32MP151 and > STM32MP153 > ARM: dts: stm32: Manage security diversity for STM32M15x SOCs > ARM: dts: stm32: Adapt STM32MP157 DK boards to stm32 DT diversity > ARM: dts: stm32: Adapt STM32MP157C ED1 board to STM32 DT diversity > > arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 1087 +++++++++++++++ > .../dts/{stm32mp157c.dtsi => stm32mp151.dtsi} | 218 ++- > arch/arm/boot/dts/stm32mp153.dtsi | 45 + > arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 1240 ----------------- > arch/arm/boot/dts/stm32mp157.dtsi | 31 + > arch/arm/boot/dts/stm32mp157a-avenger96.dts | 5 +- > arch/arm/boot/dts/stm32mp157a-dk1.dts | 604 +------- > arch/arm/boot/dts/stm32mp157c-dk2.dts | 6 +- > arch/arm/boot/dts/stm32mp157c-ed1.dts | 6 +- > arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi | 90 -- > arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi | 62 - > arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi | 78 -- > arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi | 62 - > arch/arm/boot/dts/stm32mp15xc.dtsi | 18 + > arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 606 ++++++++ > arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi | 85 ++ > arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi | 57 + > arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi | 73 + > arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi | 57 + > 19 files changed, 2232 insertions(+), 2198 deletions(-) > create mode 100644 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi > rename arch/arm/boot/dts/{stm32mp157c.dtsi => stm32mp151.dtsi} (91%) > create mode 100644 arch/arm/boot/dts/stm32mp153.dtsi > delete mode 100644 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi > create mode 100644 arch/arm/boot/dts/stm32mp157.dtsi > delete mode 100644 arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi > delete mode 100644 arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi > delete mode 100644 arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi > delete mode 100644 arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi > create mode 100644 arch/arm/boot/dts/stm32mp15xc.dtsi > create mode 100644 arch/arm/boot/dts/stm32mp15xx-dkx.dtsi > create mode 100644 arch/arm/boot/dts/stm32mp15xxaa-pinctrl.dtsi > create mode 100644 arch/arm/boot/dts/stm32mp15xxab-pinctrl.dtsi > create mode 100644 arch/arm/boot/dts/stm32mp15xxac-pinctrl.dtsi > create mode 100644 arch/arm/boot/dts/stm32mp15xxad-pinctrl.dtsi > ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2019-11-29 14:52 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-11-20 14:41 [PATCH 0/6] STM32 DT: Updates for SOC diversity Alexandre Torgue 2019-11-20 14:41 ` [PATCH 1/6] ARM: dts: stm32: Adapt stm32mp157 pinctrl to manage STM32MP15xx SOCs family Alexandre Torgue 2019-11-20 14:41 ` [PATCH 2/6] ARM: dts: stm32: Update stm32mp157 pinctrl files Alexandre Torgue 2019-11-20 14:41 ` [PATCH 3/6] ARM: dts: stm32: Introduce new STM32MP15 SOCs: STM32MP151 and STM32MP153 Alexandre Torgue 2019-11-20 14:41 ` [PATCH 4/6] ARM: dts: stm32: Manage security diversity for STM32M15x SOCs Alexandre Torgue 2019-11-20 14:41 ` [PATCH 5/6] ARM: dts: stm32: Adapt STM32MP157 DK boards to stm32 DT diversity Alexandre Torgue 2019-11-29 14:20 ` Arnd Bergmann 2019-11-29 14:51 ` Alexandre Torgue 2019-11-20 14:41 ` [PATCH 6/6] ARM: dts: stm32: Adapt STM32MP157C ED1 board to STM32 " Alexandre Torgue 2019-11-20 15:04 ` [PATCH 0/6] STM32 DT: Updates for SOC diversity Alexandre Torgue
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).