From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: robh@kernel.org, broonie@kernel.org, lee.jones@linaro.org,
linus.walleij@linaro.org
Cc: vinod.koul@linaro.org, alsa-devel@alsa-project.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
spapothi@codeaurora.org, bgoswami@codeaurora.org,
linux-gpio@vger.kernel.org,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH v4 12/12] ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga
Date: Thu, 21 Nov 2019 17:05:09 +0000 [thread overview]
Message-ID: <20191121170509.10579-13-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <20191121170509.10579-1-srinivas.kandagatla@linaro.org>
This patch adds support to Lenovo Yoga c630 compatible strings
and related setup to the sound machine driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
sound/soc/qcom/sdm845.c | 86 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 85 insertions(+), 1 deletion(-)
diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c
index 28f3cef696e6..3b5547a27aad 100644
--- a/sound/soc/qcom/sdm845.c
+++ b/sound/soc/qcom/sdm845.c
@@ -24,6 +24,9 @@
#define RIGHT_SPK_TDM_TX_MASK 0xC0
#define SPK_TDM_RX_MASK 0x03
#define NUM_TDM_SLOTS 8
+#define SLIM_MAX_TX_PORTS 16
+#define SLIM_MAX_RX_PORTS 16
+#define WCD934X_DEFAULT_MCLK_RATE 9600000
struct sdm845_snd_data {
struct snd_soc_jack jack;
@@ -36,6 +39,39 @@ struct sdm845_snd_data {
static unsigned int tdm_slot_offset[8] = {0, 4, 8, 12, 16, 20, 24, 28};
+static int sdm845_slim_snd_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai_link *dai_link = rtd->dai_link;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+ u32 rx_ch[SLIM_MAX_RX_PORTS], tx_ch[SLIM_MAX_TX_PORTS];
+ u32 rx_ch_cnt = 0, tx_ch_cnt = 0;
+ int ret = 0, i;
+
+ for (i = 0 ; i < dai_link->num_codecs; i++) {
+ ret = snd_soc_dai_get_channel_map(rtd->codec_dais[i],
+ &tx_ch_cnt, tx_ch, &rx_ch_cnt, rx_ch);
+
+ if (ret != 0 && ret != -ENOTSUPP) {
+ pr_err("failed to get codec chan map, err:%d\n", ret);
+ return ret;
+ } else if (ret == -ENOTSUPP) {
+ /* Ignore unsupported */
+ continue;
+ }
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ ret = snd_soc_dai_set_channel_map(cpu_dai, 0, NULL,
+ rx_ch_cnt, rx_ch);
+ else
+ ret = snd_soc_dai_set_channel_map(cpu_dai, tx_ch_cnt,
+ tx_ch, 0, NULL);
+ }
+
+ return 0;
+}
+
static int sdm845_tdm_snd_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -151,6 +187,11 @@ static int sdm845_snd_hw_params(struct snd_pcm_substream *substream,
case QUATERNARY_TDM_TX_0:
ret = sdm845_tdm_snd_hw_params(substream, params);
break;
+ case SLIMBUS_0_RX...SLIMBUS_6_TX:
+ ret = sdm845_slim_snd_hw_params(substream, params);
+ break;
+ case QUATERNARY_MI2S_RX:
+ break;
default:
pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id);
break;
@@ -173,7 +214,20 @@ static int sdm845_dai_init(struct snd_soc_pcm_runtime *rtd)
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct sdm845_snd_data *pdata = snd_soc_card_get_drvdata(card);
struct snd_jack *jack;
- int rval;
+ struct snd_soc_dai_link *dai_link = rtd->dai_link;
+ /*
+ * Codec SLIMBUS configuration
+ * RX1, RX2, RX3, RX4, RX5, RX6, RX7, RX8, RX9, RX10, RX11, RX12, RX13
+ * TX1, TX2, TX3, TX4, TX5, TX6, TX7, TX8, TX9, TX10, TX11, TX12, TX13
+ * TX14, TX15, TX16
+ */
+ unsigned int rx_ch[SLIM_MAX_RX_PORTS] = {144, 145, 146, 147, 148, 149,
+ 150, 151, 152, 153, 154, 155, 156};
+ unsigned int tx_ch[SLIM_MAX_TX_PORTS] = {128, 129, 130, 131, 132, 133,
+ 134, 135, 136, 137, 138, 139,
+ 140, 141, 142, 143};
+ int rval, i;
+
if (!pdata->jack_setup) {
rval = snd_soc_card_jack_new(card, "Headset Jack",
@@ -211,6 +265,21 @@ static int sdm845_dai_init(struct snd_soc_pcm_runtime *rtd)
return rval;
}
break;
+ case SLIMBUS_0_RX...SLIMBUS_6_TX:
+ for (i = 0 ; i < dai_link->num_codecs; i++) {
+ rval = snd_soc_dai_set_channel_map(rtd->codec_dais[i],
+ ARRAY_SIZE(tx_ch),
+ tx_ch,
+ ARRAY_SIZE(rx_ch),
+ rx_ch);
+ if (rval != 0 && rval != -ENOTSUPP)
+ return rval;
+
+ snd_soc_dai_set_sysclk(rtd->codec_dais[i], 0,
+ WCD934X_DEFAULT_MCLK_RATE,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ }
+ break;
default:
break;
}
@@ -256,6 +325,14 @@ static int sdm845_snd_startup(struct snd_pcm_substream *substream)
}
snd_soc_dai_set_fmt(cpu_dai, fmt);
snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
+ break;
+ case QUATERNARY_MI2S_RX:
+ snd_soc_dai_set_sysclk(cpu_dai,
+ Q6AFE_LPASS_CLK_ID_QUAD_MI2S_IBIT,
+ MI2S_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK);
+ snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_CBS_CFS);
+
+
break;
case QUATERNARY_TDM_RX_0:
@@ -294,6 +371,8 @@ static int sdm845_snd_startup(struct snd_pcm_substream *substream)
}
}
break;
+ case SLIMBUS_0_RX...SLIMBUS_6_TX:
+ break;
default:
pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id);
@@ -338,6 +417,9 @@ static void sdm845_snd_shutdown(struct snd_pcm_substream *substream)
0, SNDRV_PCM_STREAM_PLAYBACK);
}
break;
+ case SLIMBUS_0_RX...SLIMBUS_6_TX:
+ case QUATERNARY_MI2S_RX:
+ break;
default:
pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id);
@@ -451,6 +533,8 @@ static int sdm845_snd_platform_remove(struct platform_device *pdev)
static const struct of_device_id sdm845_snd_device_id[] = {
{ .compatible = "qcom,sdm845-sndcard" },
+ { .compatible = "qcom,db845c-sndcard" },
+ { .compatible = "lenovo,yoga-c630-sndcard" },
{},
};
MODULE_DEVICE_TABLE(of, sdm845_snd_device_id);
--
2.21.0
next prev parent reply other threads:[~2019-11-21 17:06 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-21 17:04 [PATCH v4 00/12] ASoC: Add support to WCD9340/WCD9341 codec Srinivas Kandagatla
2019-11-21 17:04 ` [PATCH v4 01/12] dt-bindings: SLIMBus: add slim devices optional properties Srinivas Kandagatla
2019-11-23 0:04 ` Rob Herring
2019-11-21 17:04 ` [PATCH v4 02/12] ASoC: dt-bindings: add dt bindings for WCD9340/WCD9341 audio codec Srinivas Kandagatla
2019-11-23 0:09 ` Rob Herring
2019-11-21 17:05 ` [PATCH v4 03/12] mfd: wcd934x: add support to wcd9340/wcd9341 codec Srinivas Kandagatla
2019-12-09 13:16 ` Lee Jones
2019-11-21 17:05 ` [PATCH v4 04/12] ASoC: " Srinivas Kandagatla
2019-11-21 17:05 ` [PATCH v4 05/12] ASoC: wcd934x: add basic controls Srinivas Kandagatla
2019-11-21 17:05 ` [PATCH v4 06/12] ASoC: wcd934x: add playback dapm widgets Srinivas Kandagatla
2019-11-21 17:05 ` [PATCH v4 07/12] ASoC: wcd934x: add capture " Srinivas Kandagatla
2019-11-21 17:05 ` [PATCH v4 08/12] ASoC: wcd934x: add audio routings Srinivas Kandagatla
2019-11-21 17:05 ` [PATCH v4 09/12] dt-bindings: gpio: wcd934x: Add bindings for gpio Srinivas Kandagatla
2019-11-23 0:15 ` Rob Herring
2019-11-21 17:05 ` [PATCH v4 10/12] gpio: wcd934x: Add support to wcd934x gpio controller Srinivas Kandagatla
2019-11-21 17:05 ` [PATCH v4 11/12] ASoC: qcom: dt-bindings: Add compatible for DB845c and Lenovo Yoga Srinivas Kandagatla
2019-11-21 17:05 ` Srinivas Kandagatla [this message]
2020-05-08 17:13 ` [PATCH v4 00/12] ASoC: Add support to WCD9340/WCD9341 codec Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191121170509.10579-13-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@codeaurora.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=spapothi@codeaurora.org \
--cc=vinod.koul@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).