Linux-Devicetree Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v4 1/2] dt-bindings: usb: add "hub,interval" property
@ 2019-12-03 10:15 Ikjoon Jang
  0 siblings, 0 replies; only message in thread
From: Ikjoon Jang @ 2019-12-03 10:15 UTC (permalink / raw)
  To: devicetree
  Cc: GregKroah-Hartman, RobHerring, MarkRutland, AlanStern, SuwanKim,
	GustavoA . R . Silva, IkjoonJang, JohanHovold, linux-usb,
	linux-kernel, drinkcat

Add "hub,interval" property to usb-device, so hub device can override
endpoint descriptor's bInterval.

When we know reducing autosuspend delay for built-in HIDs is better for
power saving, we can reduce it to the optimal value. But if a parent hub
has a long bInterval, mouse lags a lot from more frequent autosuspend.
So this enables overriding bInterval for a hard wired hub device only
when we know that reduces the power consumption.

Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
---
 Documentation/devicetree/bindings/usb/usb-device.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
index 036be172b1ae..44bef2ff2704 100644
--- a/Documentation/devicetree/bindings/usb/usb-device.txt
+++ b/Documentation/devicetree/bindings/usb/usb-device.txt
@@ -66,6 +66,9 @@ Required properties for host-controller nodes with device nodes:
 - #size-cells: shall be 0
 
 
+Optional properties for hub nodes
+- hub,interval: bInterval of status change endpoint. The range is 1-255.
+
 Example:
 
 &usb1 {	/* host controller */
@@ -75,6 +78,7 @@ Example:
 	hub@1 {		/* hub connected to port 1 */
 		compatible = "usb5e3,608";
 		reg = <1>;
+		hub,interval = <8>;
 	};
 
 	device@2 {	/* device connected to port 2 */
-- 
2.24.0.393.g34dc348eaf-goog


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-03 10:15 [PATCH v4 1/2] dt-bindings: usb: add "hub,interval" property Ikjoon Jang

Linux-Devicetree Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-devicetree/0 linux-devicetree/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-devicetree linux-devicetree/ https://lore.kernel.org/linux-devicetree \
		devicetree@vger.kernel.org
	public-inbox-index linux-devicetree

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-devicetree


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git