archive mirror
 help / color / mirror / Atom feed
From: Andreas Kemnade <>
To: Shawn Guo <>
	"H . Nikolaus Schaller" <>
Subject: Re: [PATCH] ARM: dts: e60k02: fix power button
Date: Thu, 5 Dec 2019 07:06:12 +0100	[thread overview]
Message-ID: <> (raw)
In-Reply-To: <20191204123645.GL3365@dragon>

[-- Attachment #1: Type: text/plain, Size: 1393 bytes --]

On Wed, 4 Dec 2019 20:36:47 +0800
Shawn Guo <> wrote:

> On Mon, Nov 11, 2019 at 09:29:59PM +0100, Andreas Kemnade wrote:
> > The power button was only producing irqs, but no key events,
> > Forced power down with long key press works, so probably
> > only a short spike arrives at the SoC.
> > Further investigation shows that LDORTC2 is off after boot
> > of the vendor kernel. LDORTC2 is shared with a GPIO at the pmic
> > which probably transfers the button press to the SoC.
> > That regulator off at boot, so "regulator-boot-on" is definitively
> > wrong. So remove that.
> > 
> > Reported-by: H. Nikolaus Schaller <>
> > Signed-off-by: Andreas Kemnade <>  
> Do you want this go into 5.5-rc as a fix?  In that case, we may need a
> Fixes tag here.
well, now there is 
regulator: core: Let boot-on regulators be powered off
so the power button should work after regulator_late_cleanup()
is called but that is usually some time after userspace has started,
so it would be better to have that in. And of course dt should
correctly describe the hardware. That would be

Fixes: c100ea86e6ab ("ARM: dts: add Netronix E60K02 board common file")

BTW: I have not seen your 5.5 stuff in Linus' tree yet. Seems that Olof
has not sent his pull request yet or is there bigger trouble?


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  reply	other threads:[~2019-12-05  6:06 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-11 20:29 [PATCH] ARM: dts: e60k02: fix power button Andreas Kemnade
2019-11-11 21:05 ` H. Nikolaus Schaller
2019-12-04 12:36 ` Shawn Guo
2019-12-05  6:06   ` Andreas Kemnade [this message]
2019-12-09  0:56     ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).