* [PATCH v2] dt-bindings: usb: Convert Allwinner USB PHY controller to a schema
@ 2019-12-09 9:33 Maxime Ripard
0 siblings, 0 replies; only message in thread
From: Maxime Ripard @ 2019-12-09 9:33 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Mark Rutland, Rob Herring, Frank Rowand, devicetree,
Chen-Yu Tsai, Maxime Ripard, linux-arm-kernel, linux-usb,
Maxime Ripard
The Allwinner SoCs have a USB PHY controller that is supported in Linux,
with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
Changes from v1:
- Split the schemas into files of their own to make it more readable
---
.../phy/allwinner,sun4i-a10-usb-phy.yaml | 105 ++++++++++++++
.../phy/allwinner,sun50i-a64-usb-phy.yaml | 106 ++++++++++++++
.../phy/allwinner,sun50i-h6-usb-phy.yaml | 105 ++++++++++++++
.../phy/allwinner,sun5i-a13-usb-phy.yaml | 93 ++++++++++++
.../phy/allwinner,sun6i-a31-usb-phy.yaml | 119 +++++++++++++++
.../phy/allwinner,sun8i-a23-usb-phy.yaml | 102 +++++++++++++
.../phy/allwinner,sun8i-a83t-usb-phy.yaml | 122 ++++++++++++++++
.../phy/allwinner,sun8i-h3-usb-phy.yaml | 137 ++++++++++++++++++
.../phy/allwinner,sun8i-r40-usb-phy.yaml | 119 +++++++++++++++
.../phy/allwinner,sun8i-v3s-usb-phy.yaml | 86 +++++++++++
.../devicetree/bindings/phy/sun4i-usb-phy.txt | 68 ---------
11 files changed, 1094 insertions(+), 68 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
delete mode 100644 Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
new file mode 100644
index 000000000000..020ef9e4c411
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 USB PHY Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#phy-cells":
+ const: 1
+
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-usb-phy
+ - allwinner,sun7i-a20-usb-phy
+
+ reg:
+ items:
+ - description: PHY Control registers
+ - description: PHY PMU1 registers
+ - description: PHY PMU2 registers
+
+ reg-names:
+ items:
+ - const: phy_ctrl
+ - const: pmu1
+ - const: pmu2
+
+ clocks:
+ maxItems: 1
+ description: USB PHY bus clock
+
+ clock-names:
+ const: usb_phy
+
+ resets:
+ items:
+ - description: USB OTG reset
+ - description: USB Host 1 Controller reset
+ - description: USB Host 2 Controller reset
+
+ reset-names:
+ items:
+ - const: usb0_reset
+ - const: usb1_reset
+ - const: usb2_reset
+
+ usb0_id_det-gpios:
+ description: GPIO to the USB OTG ID pin
+
+ usb0_vbus_det-gpios:
+ description: GPIO to the USB OTG VBUS detect pin
+
+ usb0_vbus_power-supply:
+ description: Power supply to detect the USB OTG VBUS
+
+ usb0_vbus-supply:
+ description: Regulator controlling USB OTG VBUS
+
+ usb1_vbus-supply:
+ description: Regulator controlling USB1 Host controller
+
+ usb2_vbus-supply:
+ description: Regulator controlling USB2 Host controller
+
+required:
+ - "#phy-cells"
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/sun4i-a10-ccu.h>
+ #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+ usbphy: phy@01c13400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun4i-a10-usb-phy";
+ reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
+ reg-names = "phy_ctrl", "pmu1", "pmu2";
+ clocks = <&ccu CLK_USB_PHY>;
+ clock-names = "usb_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
+ reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+ usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>;
+ usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>;
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
new file mode 100644
index 000000000000..fd6e126fcf18
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun50i-a64-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A64 USB PHY Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#phy-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun50i-a64-usb-phy
+
+ reg:
+ items:
+ - description: PHY Control registers
+ - description: PHY PMU0 registers
+ - description: PHY PMU1 registers
+
+ reg-names:
+ items:
+ - const: phy_ctrl
+ - const: pmu0
+ - const: pmu1
+
+ clocks:
+ items:
+ - description: USB OTG PHY bus clock
+ - description: USB Host 0 PHY bus clock
+
+ clock-names:
+ items:
+ - const: usb0_phy
+ - const: usb1_phy
+
+ resets:
+ items:
+ - description: USB OTG reset
+ - description: USB Host 1 Controller reset
+
+ reset-names:
+ items:
+ - const: usb0_reset
+ - const: usb1_reset
+
+ usb0_id_det-gpios:
+ description: GPIO to the USB OTG ID pin
+
+ usb0_vbus_det-gpios:
+ description: GPIO to the USB OTG VBUS detect pin
+
+ usb0_vbus_power-supply:
+ description: Power supply to detect the USB OTG VBUS
+
+ usb0_vbus-supply:
+ description: Regulator controlling USB OTG VBUS
+
+ usb1_vbus-supply:
+ description: Regulator controlling USB1 Host controller
+
+required:
+ - "#phy-cells"
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/sun50i-a64-ccu.h>
+ #include <dt-bindings/reset/sun50i-a64-ccu.h>
+
+ phy@1c19400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun50i-a64-usb-phy";
+ reg = <0x01c19400 0x14>,
+ <0x01c1a800 0x4>,
+ <0x01c1b800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu0",
+ "pmu1";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>;
+ clock-names = "usb0_phy",
+ "usb1_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>;
+ reset-names = "usb0_reset",
+ "usb1_reset";
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_drivevbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
new file mode 100644
index 000000000000..7670411002c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 USB PHY Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#phy-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun50i-h6-usb-phy
+
+ reg:
+ items:
+ - description: PHY Control registers
+ - description: PHY PMU0 registers
+ - description: PHY PMU3 registers
+
+ reg-names:
+ items:
+ - const: phy_ctrl
+ - const: pmu0
+ - const: pmu3
+
+ clocks:
+ items:
+ - description: USB OTG PHY bus clock
+ - description: USB Host PHY bus clock
+
+ clock-names:
+ items:
+ - const: usb0_phy
+ - const: usb3_phy
+
+ resets:
+ items:
+ - description: USB OTG reset
+ - description: USB Host Controller reset
+
+ reset-names:
+ items:
+ - const: usb0_reset
+ - const: usb3_reset
+
+ usb0_id_det-gpios:
+ description: GPIO to the USB OTG ID pin
+
+ usb0_vbus_det-gpios:
+ description: GPIO to the USB OTG VBUS detect pin
+
+ usb0_vbus_power-supply:
+ description: Power supply to detect the USB OTG VBUS
+
+ usb0_vbus-supply:
+ description: Regulator controlling USB OTG VBUS
+
+ usb3_vbus-supply:
+ description: Regulator controlling USB3 Host controller
+
+required:
+ - "#phy-cells"
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/sun50i-h6-ccu.h>
+ #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+ phy@5100400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun50i-h6-usb-phy";
+ reg = <0x05100400 0x24>,
+ <0x05101800 0x4>,
+ <0x05311800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu0",
+ "pmu3";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY3>;
+ clock-names = "usb0_phy",
+ "usb3_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY3>;
+ reset-names = "usb0_reset",
+ "usb3_reset";
+ usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
+ usb0_vbus-supply = <®_vcc5v>;
+ usb3_vbus-supply = <®_vcc5v>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
new file mode 100644
index 000000000000..9b319381d1ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun5i-a13-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A13 USB PHY Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#phy-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun5i-a13-usb-phy
+
+ reg:
+ items:
+ - description: PHY Control registers
+ - description: PHY PMU1 registers
+
+ reg-names:
+ items:
+ - const: phy_ctrl
+ - const: pmu1
+
+ clocks:
+ maxItems: 1
+ description: USB OTG PHY bus clock
+
+ clock-names:
+ const: usb_phy
+
+ resets:
+ items:
+ - description: USB OTG reset
+ - description: USB Host 1 Controller reset
+
+ reset-names:
+ items:
+ - const: usb0_reset
+ - const: usb1_reset
+
+ usb0_id_det-gpios:
+ description: GPIO to the USB OTG ID pin
+
+ usb0_vbus_det-gpios:
+ description: GPIO to the USB OTG VBUS detect pin
+
+ usb0_vbus_power-supply:
+ description: Power supply to detect the USB OTG VBUS
+
+ usb0_vbus-supply:
+ description: Regulator controlling USB OTG VBUS
+
+ usb1_vbus-supply:
+ description: Regulator controlling USB1 Host controller
+
+required:
+ - "#phy-cells"
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/sun5i-ccu.h>
+ #include <dt-bindings/reset/sun5i-ccu.h>
+
+ phy@1c13400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun5i-a13-usb-phy";
+ reg = <0x01c13400 0x10>, <0x01c14800 0x4>;
+ reg-names = "phy_ctrl", "pmu1";
+ clocks = <&ccu CLK_USB_PHY0>;
+ clock-names = "usb_phy";
+ resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>;
+ reset-names = "usb0_reset", "usb1_reset";
+ usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+ usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
new file mode 100644
index 000000000000..b0ed01bbf3db
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 USB PHY Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#phy-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun6i-a31-usb-phy
+
+ reg:
+ items:
+ - description: PHY Control registers
+ - description: PHY PMU1 registers
+ - description: PHY PMU2 registers
+
+ reg-names:
+ items:
+ - const: phy_ctrl
+ - const: pmu1
+ - const: pmu2
+
+ clocks:
+ items:
+ - description: USB OTG PHY bus clock
+ - description: USB Host 0 PHY bus clock
+ - description: USB Host 1 PHY bus clock
+
+ clock-names:
+ items:
+ - const: usb0_phy
+ - const: usb1_phy
+ - const: usb2_phy
+
+ resets:
+ items:
+ - description: USB OTG reset
+ - description: USB Host 1 Controller reset
+ - description: USB Host 2 Controller reset
+
+ reset-names:
+ items:
+ - const: usb0_reset
+ - const: usb1_reset
+ - const: usb2_reset
+
+ usb0_id_det-gpios:
+ description: GPIO to the USB OTG ID pin
+
+ usb0_vbus_det-gpios:
+ description: GPIO to the USB OTG VBUS detect pin
+
+ usb0_vbus_power-supply:
+ description: Power supply to detect the USB OTG VBUS
+
+ usb0_vbus-supply:
+ description: Regulator controlling USB OTG VBUS
+
+ usb1_vbus-supply:
+ description: Regulator controlling USB1 Host controller
+
+ usb2_vbus-supply:
+ description: Regulator controlling USB2 Host controller
+
+required:
+ - "#phy-cells"
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/sun6i-a31-ccu.h>
+ #include <dt-bindings/reset/sun6i-a31-ccu.h>
+
+ phy@1c19400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun6i-a31-usb-phy";
+ reg = <0x01c19400 0x10>,
+ <0x01c1a800 0x4>,
+ <0x01c1b800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu1",
+ "pmu2";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>,
+ <&ccu CLK_USB_PHY2>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset";
+ usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+ usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_drivevbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
new file mode 100644
index 000000000000..b0674406f8aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-a23-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A23 USB PHY Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#phy-cells":
+ const: 1
+
+ compatible:
+ enum:
+ - allwinner,sun8i-a23-usb-phy
+ - allwinner,sun8i-a33-usb-phy
+
+ reg:
+ items:
+ - description: PHY Control registers
+ - description: PHY PMU1 registers
+
+ reg-names:
+ items:
+ - const: phy_ctrl
+ - const: pmu1
+
+ clocks:
+ items:
+ - description: USB OTG PHY bus clock
+ - description: USB Host 0 PHY bus clock
+
+ clock-names:
+ items:
+ - const: usb0_phy
+ - const: usb1_phy
+
+ resets:
+ items:
+ - description: USB OTG reset
+ - description: USB Host 1 Controller reset
+
+ reset-names:
+ items:
+ - const: usb0_reset
+ - const: usb1_reset
+
+ usb0_id_det-gpios:
+ description: GPIO to the USB OTG ID pin
+
+ usb0_vbus_det-gpios:
+ description: GPIO to the USB OTG VBUS detect pin
+
+ usb0_vbus_power-supply:
+ description: Power supply to detect the USB OTG VBUS
+
+ usb0_vbus-supply:
+ description: Regulator controlling USB OTG VBUS
+
+ usb1_vbus-supply:
+ description: Regulator controlling USB1 Host controller
+
+required:
+ - "#phy-cells"
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+ #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+ phy@1c19400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun8i-a23-usb-phy";
+ reg = <0x01c19400 0x10>, <0x01c1a800 0x4>;
+ reg-names = "phy_ctrl", "pmu1";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>;
+ clock-names = "usb0_phy",
+ "usb1_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>;
+ reset-names = "usb0_reset",
+ "usb1_reset";
+ usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_drivevbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
new file mode 100644
index 000000000000..48dc9c834a9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-a83t-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t USB PHY Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#phy-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun8i-a83t-usb-phy
+
+ reg:
+ items:
+ - description: PHY Control registers
+ - description: PHY PMU1 registers
+ - description: PHY PMU2 registers
+
+ reg-names:
+ items:
+ - const: phy_ctrl
+ - const: pmu1
+ - const: pmu2
+
+ clocks:
+ items:
+ - description: USB OTG PHY bus clock
+ - description: USB Host 0 PHY bus clock
+ - description: USB Host 1 PHY bus clock
+ - description: USB HSIC 12MHz clock
+
+ clock-names:
+ items:
+ - const: usb0_phy
+ - const: usb1_phy
+ - const: usb2_phy
+ - const: usb2_hsic_12M
+
+ resets:
+ items:
+ - description: USB OTG reset
+ - description: USB Host 1 Controller reset
+ - description: USB Host 2 Controller reset
+
+ reset-names:
+ items:
+ - const: usb0_reset
+ - const: usb1_reset
+ - const: usb2_reset
+
+ usb0_id_det-gpios:
+ description: GPIO to the USB OTG ID pin
+
+ usb0_vbus_det-gpios:
+ description: GPIO to the USB OTG VBUS detect pin
+
+ usb0_vbus_power-supply:
+ description: Power supply to detect the USB OTG VBUS
+
+ usb0_vbus-supply:
+ description: Regulator controlling USB OTG VBUS
+
+ usb1_vbus-supply:
+ description: Regulator controlling USB1 Host controller
+
+ usb2_vbus-supply:
+ description: Regulator controlling USB2 Host controller
+
+required:
+ - "#phy-cells"
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+ #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+ phy@1c19400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun8i-a83t-usb-phy";
+ reg = <0x01c19400 0x10>,
+ <0x01c1a800 0x14>,
+ <0x01c1b800 0x14>;
+ reg-names = "phy_ctrl",
+ "pmu1",
+ "pmu2";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>,
+ <&ccu CLK_USB_HSIC>,
+ <&ccu CLK_USB_HSIC_12M>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy",
+ "usb2_hsic_12M";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_HSIC>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset";
+ usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_drivevbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
new file mode 100644
index 000000000000..60c344585276
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-h3-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H3 USB PHY Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#phy-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun8i-h3-usb-phy
+
+ reg:
+ items:
+ - description: PHY Control registers
+ - description: PHY PMU0 registers
+ - description: PHY PMU1 registers
+ - description: PHY PMU2 registers
+ - description: PHY PMU3 registers
+
+ reg-names:
+ items:
+ - const: phy_ctrl
+ - const: pmu0
+ - const: pmu1
+ - const: pmu2
+ - const: pmu3
+
+ clocks:
+ items:
+ - description: USB OTG PHY bus clock
+ - description: USB Host 0 PHY bus clock
+ - description: USB Host 1 PHY bus clock
+ - description: USB Host 2 PHY bus clock
+
+ clock-names:
+ items:
+ - const: usb0_phy
+ - const: usb1_phy
+ - const: usb2_phy
+ - const: usb3_phy
+
+ resets:
+ items:
+ - description: USB OTG reset
+ - description: USB Host 1 Controller reset
+ - description: USB Host 2 Controller reset
+ - description: USB Host 3 Controller reset
+
+ reset-names:
+ items:
+ - const: usb0_reset
+ - const: usb1_reset
+ - const: usb2_reset
+ - const: usb3_reset
+
+ usb0_id_det-gpios:
+ description: GPIO to the USB OTG ID pin
+
+ usb0_vbus_det-gpios:
+ description: GPIO to the USB OTG VBUS detect pin
+
+ usb0_vbus_power-supply:
+ description: Power supply to detect the USB OTG VBUS
+
+ usb0_vbus-supply:
+ description: Regulator controlling USB OTG VBUS
+
+ usb1_vbus-supply:
+ description: Regulator controlling USB1 Host controller
+
+ usb2_vbus-supply:
+ description: Regulator controlling USB2 Host controller
+
+ usb3_vbus-supply:
+ description: Regulator controlling USB3 Host controller
+
+required:
+ - "#phy-cells"
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/sun8i-h3-ccu.h>
+ #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+ phy@1c19400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun8i-h3-usb-phy";
+ reg = <0x01c19400 0x2c>,
+ <0x01c1a800 0x4>,
+ <0x01c1b800 0x4>,
+ <0x01c1c800 0x4>,
+ <0x01c1d800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu0",
+ "pmu1",
+ "pmu2",
+ "pmu3";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>,
+ <&ccu CLK_USB_PHY2>,
+ <&ccu CLK_USB_PHY3>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy",
+ "usb3_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>,
+ <&ccu RST_USB_PHY3>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset",
+ "usb3_reset";
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ usb3_vbus-supply = <®_usb3_vbus>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
new file mode 100644
index 000000000000..a2bb36790fbd
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-r40-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner R40 USB PHY Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#phy-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun8i-r40-usb-phy
+
+ reg:
+ items:
+ - description: PHY Control registers
+ - description: PHY PMU0 registers
+ - description: PHY PMU1 registers
+ - description: PHY PMU2 registers
+
+ reg-names:
+ items:
+ - const: phy_ctrl
+ - const: pmu0
+ - const: pmu1
+ - const: pmu2
+
+ clocks:
+ items:
+ - description: USB OTG PHY bus clock
+ - description: USB Host 0 PHY bus clock
+ - description: USB Host 1 PHY bus clock
+
+ clock-names:
+ items:
+ - const: usb0_phy
+ - const: usb1_phy
+ - const: usb2_phy
+
+ resets:
+ items:
+ - description: USB OTG reset
+ - description: USB Host 1 Controller reset
+ - description: USB Host 2 Controller reset
+
+ reset-names:
+ items:
+ - const: usb0_reset
+ - const: usb1_reset
+ - const: usb2_reset
+
+ usb0_id_det-gpios:
+ description: GPIO to the USB OTG ID pin
+
+ usb0_vbus_det-gpios:
+ description: GPIO to the USB OTG VBUS detect pin
+
+ usb0_vbus_power-supply:
+ description: Power supply to detect the USB OTG VBUS
+
+ usb0_vbus-supply:
+ description: Regulator controlling USB OTG VBUS
+
+ usb1_vbus-supply:
+ description: Regulator controlling USB1 Host controller
+
+ usb2_vbus-supply:
+ description: Regulator controlling USB2 Host controller
+
+required:
+ - "#phy-cells"
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/sun8i-r40-ccu.h>
+ #include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+ phy@1c13400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun8i-r40-usb-phy";
+ reg = <0x01c13400 0x14>,
+ <0x01c14800 0x4>,
+ <0x01c19800 0x4>,
+ <0x01c1c800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu0",
+ "pmu1",
+ "pmu2";
+ clocks = <&ccu CLK_USB_PHY0>,
+ <&ccu CLK_USB_PHY1>,
+ <&ccu CLK_USB_PHY2>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy";
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset";
+ usb1_vbus-supply = <®_vcc5v0>;
+ usb2_vbus-supply = <®_vcc5v0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
new file mode 100644
index 000000000000..eadfd0c9493c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-v3s-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner V3s USB PHY Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#phy-cells":
+ const: 1
+
+ compatible:
+ const: allwinner,sun8i-v3s-usb-phy
+
+ reg:
+ items:
+ - description: PHY Control registers
+ - description: PHY PMU0 registers
+
+ reg-names:
+ items:
+ - const: phy_ctrl
+ - const: pmu0
+
+ clocks:
+ maxItems: 1
+ description: USB OTG PHY bus clock
+
+ clock-names:
+ const: usb0_phy
+
+ resets:
+ maxItems: 1
+ description: USB OTG reset
+
+ reset-names:
+ const: usb0_reset
+
+ usb0_id_det-gpios:
+ description: GPIO to the USB OTG ID pin
+
+ usb0_vbus_det-gpios:
+ description: GPIO to the USB OTG VBUS detect pin
+
+ usb0_vbus_power-supply:
+ description: Power supply to detect the USB OTG VBUS
+
+ usb0_vbus-supply:
+ description: Regulator controlling USB OTG VBUS
+
+required:
+ - "#phy-cells"
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - resets
+ - reset-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+ #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+ phy@1c19400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun8i-v3s-usb-phy";
+ reg = <0x01c19400 0x2c>,
+ <0x01c1a800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu0";
+ clocks = <&ccu CLK_USB_PHY0>;
+ clock-names = "usb0_phy";
+ resets = <&ccu RST_USB_PHY0>;
+ reset-names = "usb0_reset";
+ usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
deleted file mode 100644
index f2e120af17f0..000000000000
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-Allwinner sun4i USB PHY
------------------------
-
-Required properties:
-- compatible : should be one of
- * allwinner,sun4i-a10-usb-phy
- * allwinner,sun5i-a13-usb-phy
- * allwinner,sun6i-a31-usb-phy
- * allwinner,sun7i-a20-usb-phy
- * allwinner,sun8i-a23-usb-phy
- * allwinner,sun8i-a33-usb-phy
- * allwinner,sun8i-a83t-usb-phy
- * allwinner,sun8i-h3-usb-phy
- * allwinner,sun8i-r40-usb-phy
- * allwinner,sun8i-v3s-usb-phy
- * allwinner,sun50i-a64-usb-phy
- * allwinner,sun50i-h6-usb-phy
-- reg : a list of offset + length pairs
-- reg-names :
- * "phy_ctrl"
- * "pmu0" for H3, V3s, A64 or H6
- * "pmu1"
- * "pmu2" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
- * "pmu3" for sun8i-h3 or sun50i-h6
-- #phy-cells : from the generic phy bindings, must be 1
-- clocks : phandle + clock specifier for the phy clocks
-- clock-names :
- * "usb_phy" for sun4i, sun5i or sun7i
- * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i
- * "usb0_phy", "usb1_phy" for sun8i
- * "usb0_phy", "usb1_phy", "usb2_phy" and "usb2_hsic_12M" for sun8i-a83t
- * "usb0_phy", "usb1_phy", "usb2_phy" and "usb3_phy" for sun8i-h3
- * "usb0_phy" and "usb3_phy" for sun50i-h6
-- resets : a list of phandle + reset specifier pairs
-- reset-names :
- * "usb0_reset"
- * "usb1_reset"
- * "usb2_reset" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
- * "usb3_reset" for sun8i-h3 and sun50i-h6
-
-Optional properties:
-- usb0_id_det-gpios : gpio phandle for reading the otg id pin value
-- usb0_vbus_det-gpios : gpio phandle for detecting the presence of usb0 vbus
-- usb0_vbus_power-supply: power-supply phandle for usb0 vbus presence detect
-- usb0_vbus-supply : regulator phandle for controller usb0 vbus
-- usb1_vbus-supply : regulator phandle for controller usb1 vbus
-- usb2_vbus-supply : regulator phandle for controller usb2 vbus
-- usb3_vbus-supply : regulator phandle for controller usb3 vbus
-
-Example:
- usbphy: phy@01c13400 {
- #phy-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-phy";
- /* phy base regs, phy1 pmu reg, phy2 pmu reg */
- reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
- reg-names = "phy_ctrl", "pmu1", "pmu2";
- clocks = <&usb_clk 8>;
- clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
- reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
- usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
- usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
- usb0_vbus-supply = <®_usb0_vbus>;
- usb1_vbus-supply = <®_usb1_vbus>;
- usb2_vbus-supply = <®_usb2_vbus>;
- };
--
2.23.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2019-12-09 9:33 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-09 9:33 [PATCH v2] dt-bindings: usb: Convert Allwinner USB PHY controller to a schema Maxime Ripard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).