[PATCH v4 0/3] Add Unisoc's SC9863A support

[PATCH v4 0/3] Add Unisoc's SC9863A support

[Chunyan Zhang]

SC9863A has Octa-core ARM Cortex A55 application processor. Find more
details about it on the website: http://www.unisoc.com/sc9863a

Changes from v3:
* Rebased on v5.5-rc1;
* Fix the cpu-map to put all cpus into the single cluster;
* Fixed a bindings error.

Changes from v2:
* Discard some dt-bindings patches which have been applied by Rob Herring.
* Added a new dt-binding file for sprd global-regs, also added a vendor directory for sprd.
* Moved sprd.yaml to the vendor directory.
* Addressed comments from Rob:
- fixed dtbs_check errors;
- move gic under to the bus node;
- removed msi-controller from gic, sinceSC9863A doesn't provide ITS;
- added specific compatible string for syscon nodes;
- cut down registers range of syscon nodes;
- removed unnecessary property "sprd,sc-id";
- added earlycon support in devicetree.

Changes from v1: 
- Convert DT bindings to json-schema.

Chunyan Zhang (3):
  dt-bindings: arm: sprd: add global registers bindings
  dt-bindings: arm: move sprd board file to vendor directory
  arm64: dts: Add Unisoc's SC9863A SoC support

 .../bindings/arm/sprd/global-regs.yaml        |  34 ++
 .../bindings/arm/{ => sprd}/sprd.yaml         |   2 +-
 arch/arm64/boot/dts/sprd/Makefile             |   3 +-
 arch/arm64/boot/dts/sprd/sc9863a.dtsi         | 523 ++++++++++++++++++
 arch/arm64/boot/dts/sprd/sharkl3.dtsi         | 148 +++++
 arch/arm64/boot/dts/sprd/sp9863a-1h10.dts     |  39 ++
 6 files changed, 747 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/sprd/global-regs.yaml
 rename Documentation/devicetree/bindings/arm/{ => sprd}/sprd.yaml (92%)
 create mode 100644 arch/arm64/boot/dts/sprd/sc9863a.dtsi
 create mode 100644 arch/arm64/boot/dts/sprd/sharkl3.dtsi
 create mode 100644 arch/arm64/boot/dts/sprd/sp9863a-1h10.dts

-- 
2.20.1

[PATCH v4 1/3] dt-bindings: arm: sprd: add global registers bindings

[Chunyan Zhang]

From: Chunyan Zhang <chunyan.zhang@unisoc.com>

The global registers would be used by different peripheral devices which
we can see them as syscon clients which can use regmap interface that
syscon driver provides.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
 .../bindings/arm/sprd/global-regs.yaml        | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/sprd/global-regs.yaml

diff --git a/Documentation/devicetree/bindings/arm/sprd/global-regs.yaml b/Documentation/devicetree/bindings/arm/sprd/global-regs.yaml
new file mode 100644
index 000000000000..012207166116
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sprd/global-regs.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Unisoc Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/sprd/global-regs.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Unisoc Global Registers
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sprd,sc9860-glbregs
+              - sprd,sc9863a-glbregs
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+examples:
+  - |
+    apb_regs: syscon@402e0000 {
+      compatible = "sprd,sc9863a-glbregs", "syscon";
+      reg = <0x402e0000 0x4000>;
+    };
+
+...
-- 
2.20.1

[PATCH v4 2/3] dt-bindings: arm: move sprd board file to vendor directory

[Chunyan Zhang]

From: Chunyan Zhang <chunyan.zhang@unisoc.com>

We've created a vendor directory for sprd, so move the board bindings to
there.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
 Documentation/devicetree/bindings/arm/{ => sprd}/sprd.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
 rename Documentation/devicetree/bindings/arm/{ => sprd}/sprd.yaml (92%)

diff --git a/Documentation/devicetree/bindings/arm/sprd.yaml b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
similarity index 92%
rename from Documentation/devicetree/bindings/arm/sprd.yaml
rename to Documentation/devicetree/bindings/arm/sprd/sprd.yaml
index c35fb845ccaa..0258a96bfbde 100644
--- a/Documentation/devicetree/bindings/arm/sprd.yaml
+++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 Unisoc Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/sprd.yaml#
+$id: http://devicetree.org/schemas/arm/sprd/sprd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Unisoc platforms device tree bindings
-- 
2.20.1

[PATCH v4 3/3] arm64: dts: Add Unisoc's SC9863A SoC support

[Chunyan Zhang]

From: Chunyan Zhang <chunyan.zhang@unisoc.com>

Add basic DT to support Unisoc's SC9863A, with this patch,
the board sp9863a-1h10 can run into console.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
 arch/arm64/boot/dts/sprd/Makefile         |   3 +-
 arch/arm64/boot/dts/sprd/sc9863a.dtsi     | 523 ++++++++++++++++++++++
 arch/arm64/boot/dts/sprd/sharkl3.dtsi     | 148 ++++++
 arch/arm64/boot/dts/sprd/sp9863a-1h10.dts |  39 ++
 4 files changed, 712 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/sprd/sc9863a.dtsi
 create mode 100644 arch/arm64/boot/dts/sprd/sharkl3.dtsi
 create mode 100644 arch/arm64/boot/dts/sprd/sp9863a-1h10.dts

diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
index 2bdc23804f40..f4f1f5148cc2 100644
--- a/arch/arm64/boot/dts/sprd/Makefile
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
-			sp9860g-1h10.dtb
+			sp9860g-1h10.dtb	\
+			sp9863a-1h10.dtb
diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
new file mode 100644
index 000000000000..cd80756c888d
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SC9863A SoC DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "sharkl3.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "arm,psci";
+		CORE_PD: core-pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		gic: interrupt-controller@14000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			reg = <0x0 0x14000000 0 0x20000>,	/* GICD */
+			      <0x0 0x14040000 0 0x100000>;	/* GICR */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		funnel@10001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x10001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_soc_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					funnel_soc_in_port: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_out_port>;
+					};
+				};
+			};
+		};
+
+		etb@10003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x10003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+						<&funnel_soc_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@12001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_little_out_port: endpoint {
+						remote-endpoint =
+						<&etf_little_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_little_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_little_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_little_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_little_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+		};
+
+		etf@12002000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x12002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_little_out: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_in_port0>;
+					};
+				};
+			};
+
+			in-port {
+				port {
+					etf_little_in: endpoint {
+						remote-endpoint =
+						<&funnel_little_out_port>;
+					};
+				};
+			};
+		};
+
+		etf@12003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x12003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_big_out: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_in_port1>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_big_in: endpoint {
+						remote-endpoint =
+						<&funnel_big_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@12004000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_ca55_out_port: endpoint {
+						remote-endpoint =
+						<&funnel_soc_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_ca55_in_port0: endpoint {
+						remote-endpoint =
+						<&etf_little_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_ca55_in_port1: endpoint {
+						remote-endpoint =
+						<&etf_big_out>;
+					};
+				};
+			};
+		};
+
+		funnel@12005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_big_out_port: endpoint {
+						remote-endpoint =
+						<&etf_big_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_big_in_port0: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_big_in_port1: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_big_in_port2: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_big_in_port3: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etm@13040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13040000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@13140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13140000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@13240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13240000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@13340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13340000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm@13440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13440000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@13540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13540000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@13640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13640000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@13740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13740000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port3>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sharkl3.dtsi b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
new file mode 100644
index 000000000000..3b5a94560481
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc Sharkl3 platform DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ap_ahb_regs: syscon@20e00000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x20e00000 0 0x4000>;
+		};
+
+		pub_ctrl_regs: syscon@300e0000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x300e0000 0 0x4000>;
+		};
+
+		pub_wrap_regs: syscon@300f0000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x300f0000 0 0x1000>;
+		};
+
+		pmu_regs: syscon@402b0000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x402b0000 0 0x4000>;
+		};
+
+		aon_apb_regs: syscon@402e0000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x402e0000 0 0x4000>;
+		};
+
+		anlg_phy_g1_regs: syscon@40350000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x40350000 0 0x3000>;
+		};
+
+		anlg_phy_g2_regs: syscon@40353000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x40353000 0 0x3000>;
+		};
+
+		anlg_phy_g4_regs: syscon@40359000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x40359000 0 0x3000>;
+		};
+
+		anlg_phy_g5_regs: syscon@4035c000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x4035c000 0 0x3000>;
+		};
+
+		anlg_phy_g7_regs: syscon@40363000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x40363000 0 0x3000>;
+		};
+
+		anlg_wrap_wcn_regs: syscon@40366000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x40366000 0 0x3000>;
+		};
+
+		mm_ahb_regs: syscon@60800000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x60800000 0 0x1000>;
+		};
+
+		mm_vsp_ahb_regs: syscon@62000000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x62000000 0 0x1000>;
+		};
+
+		ap_apb_regs: syscon@71300000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon";
+			reg = <0 0x71300000 0 0x4000>;
+		};
+
+		apb@70000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart2: serial@200000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x200000 0x100>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart3: serial@300000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x300000 0x100>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart4: serial@400000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x400000 0x100>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ext_26m: ext-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
new file mode 100644
index 000000000000..5c32c1596337
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SP9863A-1h10 boards DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "sc9863a.dtsi"
+
+/ {
+	model = "Spreadtrum SP9863A-1H10 Board";
+
+	compatible = "sprd,sp9863a-1h10", "sprd,sc9863a";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+		bootargs = "earlycon";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
-- 
2.20.1

Re: [PATCH v4 3/3] arm64: dts: Add Unisoc's SC9863A SoC support

[Rob Herring]

On Mon, Dec 09, 2019 at 07:44:04PM +0800, Chunyan Zhang wrote:
> From: Chunyan Zhang <chunyan.zhang@unisoc.com>
> 
> Add basic DT to support Unisoc's SC9863A, with this patch,
> the board sp9863a-1h10 can run into console.
> 
> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
> ---
>  arch/arm64/boot/dts/sprd/Makefile         |   3 +-
>  arch/arm64/boot/dts/sprd/sc9863a.dtsi     | 523 ++++++++++++++++++++++
>  arch/arm64/boot/dts/sprd/sharkl3.dtsi     | 148 ++++++
>  arch/arm64/boot/dts/sprd/sp9863a-1h10.dts |  39 ++
>  4 files changed, 712 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm64/boot/dts/sprd/sc9863a.dtsi
>  create mode 100644 arch/arm64/boot/dts/sprd/sharkl3.dtsi
>  create mode 100644 arch/arm64/boot/dts/sprd/sp9863a-1h10.dts


> diff --git a/arch/arm64/boot/dts/sprd/sharkl3.dtsi b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
> new file mode 100644
> index 000000000000..3b5a94560481
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
> @@ -0,0 +1,148 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Unisoc Sharkl3 platform DTS file
> + *
> + * Copyright (C) 2019, Unisoc Inc.
> + */
> +
> +/ {
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	soc: soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		ap_ahb_regs: syscon@20e00000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";
> +			reg = <0 0x20e00000 0 0x4000>;
> +		};
> +
> +		pub_ctrl_regs: syscon@300e0000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";

Having a bunch of the same compatible doesn't look right. I assume by 
the label names each of these are a different set of registers. The 
compatible should be specific enough the OS can match to a driver that 
knows the register details.

Doesn't look like you use all these, so maybe drop until you do and/or 
figure out if you can use common bindings for some of these.

> +			reg = <0 0x300e0000 0 0x4000>;
> +		};
> +
> +		pub_wrap_regs: syscon@300f0000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";
> +			reg = <0 0x300f0000 0 0x1000>;
> +		};
> +
> +		pmu_regs: syscon@402b0000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";
> +			reg = <0 0x402b0000 0 0x4000>;
> +		};
> +
> +		aon_apb_regs: syscon@402e0000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";
> +			reg = <0 0x402e0000 0 0x4000>;
> +		};
> +
> +		anlg_phy_g1_regs: syscon@40350000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";
> +			reg = <0 0x40350000 0 0x3000>;
> +		};
> +
> +		anlg_phy_g2_regs: syscon@40353000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";
> +			reg = <0 0x40353000 0 0x3000>;
> +		};
> +
> +		anlg_phy_g4_regs: syscon@40359000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";
> +			reg = <0 0x40359000 0 0x3000>;
> +		};
> +
> +		anlg_phy_g5_regs: syscon@4035c000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";
> +			reg = <0 0x4035c000 0 0x3000>;
> +		};
> +
> +		anlg_phy_g7_regs: syscon@40363000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";
> +			reg = <0 0x40363000 0 0x3000>;
> +		};
> +
> +		anlg_wrap_wcn_regs: syscon@40366000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";
> +			reg = <0 0x40366000 0 0x3000>;
> +		};
> +
> +		mm_ahb_regs: syscon@60800000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";
> +			reg = <0 0x60800000 0 0x1000>;
> +		};
> +
> +		mm_vsp_ahb_regs: syscon@62000000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";
> +			reg = <0 0x62000000 0 0x1000>;
> +		};
> +
> +		ap_apb_regs: syscon@71300000 {
> +			compatible = "sprd,sc9863a-glbregs", "syscon";
> +			reg = <0 0x71300000 0 0x4000>;
> +		};
> +
> +		apb@70000000 {
> +			compatible = "simple-bus";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0 0x0 0x70000000 0x10000000>;
> +
> +			uart0: serial@0 {
> +				compatible = "sprd,sc9863a-uart",
> +					     "sprd,sc9836-uart";
> +				reg = <0x0 0x100>;
> +				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&ext_26m>;
> +				status = "disabled";
> +			};
> +
> +			uart1: serial@100000 {
> +				compatible = "sprd,sc9863a-uart",
> +					     "sprd,sc9836-uart";
> +				reg = <0x100000 0x100>;
> +				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&ext_26m>;
> +				status = "disabled";
> +			};
> +
> +			uart2: serial@200000 {
> +				compatible = "sprd,sc9863a-uart",
> +					     "sprd,sc9836-uart";
> +				reg = <0x200000 0x100>;
> +				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&ext_26m>;
> +				status = "disabled";
> +			};
> +
> +			uart3: serial@300000 {
> +				compatible = "sprd,sc9863a-uart",
> +					     "sprd,sc9836-uart";
> +				reg = <0x300000 0x100>;
> +				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&ext_26m>;
> +				status = "disabled";
> +			};
> +
> +			uart4: serial@400000 {
> +				compatible = "sprd,sc9863a-uart",
> +					     "sprd,sc9836-uart";
> +				reg = <0x400000 0x100>;
> +				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&ext_26m>;
> +				status = "disabled";
> +			};
> +		};
> +	};
> +
> +	ext_26m: ext-26m {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <26000000>;
> +		clock-output-names = "ext-26m";
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
> new file mode 100644
> index 000000000000..5c32c1596337
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
> @@ -0,0 +1,39 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Unisoc SP9863A-1h10 boards DTS file
> + *
> + * Copyright (C) 2019, Unisoc Inc.
> + */
> +
> +/dts-v1/;
> +
> +#include "sc9863a.dtsi"
> +
> +/ {
> +	model = "Spreadtrum SP9863A-1H10 Board";
> +
> +	compatible = "sprd,sp9863a-1h10", "sprd,sc9863a";
> +
> +	aliases {
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		reg = <0x0 0x80000000 0x0 0x80000000>;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial1:115200n8";
> +		bootargs = "earlycon";
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> -- 
> 2.20.1
> 

Re: [PATCH v4 2/3] dt-bindings: arm: move sprd board file to vendor directory

[Rob Herring]

On Mon,  9 Dec 2019 19:44:03 +0800, Chunyan Zhang wrote:
> From: Chunyan Zhang <chunyan.zhang@unisoc.com>
> 
> We've created a vendor directory for sprd, so move the board bindings to
> there.
> 
> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
> ---
>  Documentation/devicetree/bindings/arm/{ => sprd}/sprd.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>  rename Documentation/devicetree/bindings/arm/{ => sprd}/sprd.yaml (92%)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 3/3] arm64: dts: Add Unisoc's SC9863A SoC support

[Chunyan Zhang]

On Fri, 20 Dec 2019 at 02:36, Rob Herring <robh@kernel.org> wrote:
>
> On Mon, Dec 09, 2019 at 07:44:04PM +0800, Chunyan Zhang wrote:
> > From: Chunyan Zhang <chunyan.zhang@unisoc.com>
> >
> > Add basic DT to support Unisoc's SC9863A, with this patch,
> > the board sp9863a-1h10 can run into console.
> >
> > Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
> > ---
> >  arch/arm64/boot/dts/sprd/Makefile         |   3 +-
> >  arch/arm64/boot/dts/sprd/sc9863a.dtsi     | 523 ++++++++++++++++++++++
> >  arch/arm64/boot/dts/sprd/sharkl3.dtsi     | 148 ++++++
> >  arch/arm64/boot/dts/sprd/sp9863a-1h10.dts |  39 ++
> >  4 files changed, 712 insertions(+), 1 deletion(-)
> >  create mode 100644 arch/arm64/boot/dts/sprd/sc9863a.dtsi
> >  create mode 100644 arch/arm64/boot/dts/sprd/sharkl3.dtsi
> >  create mode 100644 arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
>
>
> > diff --git a/arch/arm64/boot/dts/sprd/sharkl3.dtsi b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
> > new file mode 100644
> > index 000000000000..3b5a94560481
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
> > @@ -0,0 +1,148 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Unisoc Sharkl3 platform DTS file
> > + *
> > + * Copyright (C) 2019, Unisoc Inc.
> > + */
> > +
> > +/ {
> > +     interrupt-parent = <&gic>;
> > +     #address-cells = <2>;
> > +     #size-cells = <2>;
> > +
> > +     soc: soc {
> > +             compatible = "simple-bus";
> > +             #address-cells = <2>;
> > +             #size-cells = <2>;
> > +             ranges;
> > +
> > +             ap_ahb_regs: syscon@20e00000 {
> > +                     compatible = "sprd,sc9863a-glbregs", "syscon";
> > +                     reg = <0 0x20e00000 0 0x4000>;
> > +             };
> > +
> > +             pub_ctrl_regs: syscon@300e0000 {
> > +                     compatible = "sprd,sc9863a-glbregs", "syscon";
>
> Having a bunch of the same compatible doesn't look right. I assume by
> the label names each of these are a different set of registers. The
> compatible should be specific enough the OS can match to a driver that
> knows the register details.
>
> Doesn't look like you use all these, so maybe drop until you do and/or

Ok, I'll drop them in this patchset, and add back when adding clock
nodes which need these syscon nodes.
Let's discuss if these syscons can have the same compatible string then.

Thanks,
Chunyan