devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrey Konovalov <andrey.konovalov@linaro.org>
To: mchehab@kernel.org, robh+dt@kernel.org
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	peter.griffin@linaro.org, dave.stevenson@raspberrypi.com,
	ezequiel@collabora.com, sakari.ailus@linux.intel.com,
	Andrey Konovalov <andrey.konovalov@linaro.org>
Subject: [PATCH v3 1/2] dt-bindings: media: i2c: Add IMX219 CMOS sensor binding
Date: Fri, 10 Jan 2020 23:09:14 +0300	[thread overview]
Message-ID: <20200110200915.22575-2-andrey.konovalov@linaro.org> (raw)
In-Reply-To: <20200110200915.22575-1-andrey.konovalov@linaro.org>

Add YAML device tree binding for IMX219 CMOS image sensor, and
the relevant MAINTAINERS entries.

Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
---
 .../devicetree/bindings/media/i2c/imx219.yaml | 104 ++++++++++++++++++
 MAINTAINERS                                   |   8 ++
 2 files changed, 112 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
new file mode 100644
index 000000000000..536766b63e39
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
+
+maintainers:
+  - Dave Stevenson <dave.stevenson@raspberrypi.com>
+
+description: |-
+  The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
+  with an active array size of 3280H x 2464V. It is programmable through
+  I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
+  Image data is sent through MIPI CSI-2, which is configured as either 2 or
+  4 data lanes.
+
+properties:
+  compatible:
+    const: sony,imx219
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  VDIG-supply:
+    description:
+      Digital I/O voltage supply, 1.8 volts
+
+  VANA-supply:
+    description:
+      Analog voltage supply, 2.8 volts
+
+  VDDL-supply:
+    description:
+      Digital core voltage supply, 1.2 volts
+
+  reset-gpios:
+    description: |-
+      Reference to the GPIO connected to the xclr pin, if any.
+      Must be released (set high) after all supplies are applied.
+
+  # See ../video-interfaces.txt for more details
+  port:
+    type: object
+    properties:
+      endpoint:
+        type: object
+        properties:
+          data-lanes:
+            description: |-
+              The sensor supports either two-lane, or four-lane operation.
+              If this property is omitted four-lane operation is assumed.
+              For two-lane operation the property must be set to <1 2>.
+            items:
+              - const: 1
+              - const: 2
+
+          clock-noncontinuous:
+            type: boolean
+            description: |-
+              MIPI CSI-2 clock is non-continuous if this property is present,
+              otherwise it's continuous.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - VANA-supply
+  - VDIG-supply
+  - VDDL-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx219: sensor@10 {
+            compatible = "sony,imx219";
+            reg = <0x10>;
+            clocks = <&imx219_clk>;
+            VANA-supply = <&imx219_vana>;   /* 2.8v */
+            VDIG-supply = <&imx219_vdig>;   /* 1.8v */
+            VDDL-supply = <&imx219_vddl>;   /* 1.2v */
+
+            port {
+                imx219_0: endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2>;
+                    clock-noncontinuous;
+                };
+            };
+        };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 4017e6b760be..61b598f072e8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15351,6 +15351,14 @@ S:	Maintained
 F:	drivers/media/i2c/imx214.c
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
 
+SONY IMX219 SENSOR DRIVER
+M:	Dave Stevenson <dave.stevenson@raspberrypi.com>
+L:	linux-media@vger.kernel.org
+T:	git git://linuxtv.org/media_tree.git
+S:	Maintained
+F:	drivers/media/i2c/imx219.c
+F:	Documentation/devicetree/bindings/media/i2c/imx219.yaml
+
 SONY IMX258 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
-- 
2.17.1


  reply	other threads:[~2020-01-10 20:10 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-10 20:09 [PATCH v3 0/2] Add IMX219 CMOS image sensor support Andrey Konovalov
2020-01-10 20:09 ` Andrey Konovalov [this message]
2020-01-13 23:04   ` [PATCH v3 1/2] dt-bindings: media: i2c: Add IMX219 CMOS sensor binding Rob Herring
2020-01-10 20:09 ` [PATCH v3 2/2] media: i2c: Add driver for Sony IMX219 sensor Andrey Konovalov
2020-01-11  4:45 ` [PATCH v3 0/2] Add IMX219 CMOS image sensor support Ezequiel Garcia
2020-01-11 17:46   ` Andrey Konovalov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200110200915.22575-2-andrey.konovalov@linaro.org \
    --to=andrey.konovalov@linaro.org \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=devicetree@vger.kernel.org \
    --cc=ezequiel@collabora.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=peter.griffin@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).