[PATCH AUTOSEL 4.19 081/252] arm64: dts: allwinner: H6: Add PMU mode

[PATCH AUTOSEL 4.19 081/252] arm64: dts: allwinner: H6: Add PMU mode

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 7aa9b9eb7d6a8fde7acbe0446444f7e3fae1fe3b ]

Add the Performance Monitoring Unit (PMU) device tree node to the H6
.dtsi, which tells DT users which interrupts are triggered by PMU
overflow events on each core. The numbers come from the manual and have
been checked in U-Boot and with perf in Linux.

Tested with perf record and taskset on a Pine H64.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 72813e7aefb8a..bd43912696111 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -69,6 +69,16 @@
 		clock-output-names = "osc32k";
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu",
+			     "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
-- 
2.20.1

[PATCH AUTOSEL 4.19 082/252] arm: dts: allwinner: H3: Add PMU node

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 0388a110747bec0c9d9de995842bb2a03a26aae1 ]

Add the Performance Monitoring Unit (PMU) device tree node to the H3
.dtsi, which tells DT users which interrupts are triggered by PMU
overflow events on each core. The numbers come from the manual and have
been checked in U-Boot and with perf in Linux.

Tested with perf record and taskset on an OrangePi Zero.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sun8i-h3.dtsi | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 9233ba30a857c..11172fbdc03aa 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -80,7 +80,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
@@ -90,7 +90,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
@@ -100,7 +100,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
@@ -111,6 +111,15 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-- 
2.20.1

[PATCH AUTOSEL 4.19 083/252] ARM: dts: at91: Reenable UART TX pull-ups

[Sasha Levin]

From: Ingo van Lil <inguin@gmx.de>

[ Upstream commit 9d39d86cd4af2b17b970d63307daad71f563d207 ]

Pull-ups for SAM9 UART/USART TX lines were disabled in a previous
commit. However, several chips in the SAM9 family require pull-ups to
prevent the TX lines from falling (and causing an endless break
condition) when the transceiver is disabled.

From the SAM9G20 datasheet, 32.5.1: "To prevent the TXD line from
falling when the USART is disabled, the use of an internal pull up
is mandatory.". This commit reenables the pull-ups for all chips having
that sentence in their datasheets.

Fixes: 5e04822f7db5 ("ARM: dts: at91: fixes uart pinctrl, set pullup on rx, clear pullup on tx")
Signed-off-by: Ingo van Lil <inguin@gmx.de>
Cc: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20191203142147.875227-1-inguin@gmx.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/at91sam9260.dtsi | 12 ++++++------
 arch/arm/boot/dts/at91sam9261.dtsi |  6 +++---
 arch/arm/boot/dts/at91sam9263.dtsi |  6 +++---
 arch/arm/boot/dts/at91sam9g45.dtsi |  8 ++++----
 arch/arm/boot/dts/at91sam9rl.dtsi  |  8 ++++----
 5 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 9118e29b6d6ad..3fa6b9fbb8226 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -434,7 +434,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -468,7 +468,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -486,7 +486,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -504,7 +504,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -522,7 +522,7 @@
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
 							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
 					};
 				};
@@ -530,7 +530,7 @@
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 				};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 33f09d5ea0201..590d288529978 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -328,7 +328,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -346,7 +346,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -364,7 +364,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index af68a86c99731..745918b977860 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -437,7 +437,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -455,7 +455,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -473,7 +473,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index d16db1fa7e15c..ea80a5a127609 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -555,7 +555,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -573,7 +573,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -591,7 +591,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -609,7 +609,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 8fb22030f00bc..ad495f5a5790f 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -681,7 +681,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -720,7 +720,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -743,7 +743,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -766,7 +766,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 086/252] arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core

[Sasha Levin]

From: Manu Gautam <mgautam@codeaurora.org>

[ Upstream commit d026c96b25b7ce5df89526aad2df988d553edb4d ]

QUSB2 PHY on msm8996 doesn't work well when autosuspend by
dwc3 core using USB2PHYCFG register is enabled. One of the
issue seen is that PHY driver reports PLL lock failure and
fails phy_init() if dwc3 core has USB2 PHY suspend enabled.
Fix this by using quirks to disable USB2 PHY LPM/suspend and
dwc3 core already takes care of explicitly suspending PHY
during suspend if quirks are specified.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Link: https://lore.kernel.org/r/20191209151501.26993-1-p.pisati@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8c86c41a0d25f..3e7baabf64507 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -918,6 +918,8 @@
 				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&hsusb_phy2>;
 				phy-names = "usb2-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
 			};
 		};
 
@@ -947,6 +949,8 @@
 				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
 			};
 		};
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 088/252] ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3

[Sasha Levin]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

[ Upstream commit cd58a174e58649426fb43d7456e5f7d7eab58af1 ]

RDU2 production units come with resistor connecting WP pin to
correpsonding GPIO DNPed for both SD card slots. Drop any WP related
configuration and mark both slots with "disable-wp".

Reported-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 315d0e7615f33..56d6e82b75337 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -657,7 +657,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	disable-wp;
 	vmmc-supply = <&reg_3p3v_sd>;
 	vqmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
@@ -670,7 +670,7 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	disable-wp;
 	vmmc-supply = <&reg_3p3v_sd>;
 	vqmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
@@ -1081,7 +1081,6 @@
 			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
 			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
 			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x40010040
 			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x40010040
 		>;
 	};
@@ -1094,7 +1093,6 @@
 			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x40010040
 			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x40010040
 
 		>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 089/252] ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed

[Sasha Levin]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

[ Upstream commit 6bb1e09c4c375db29770444f689f35f5cbe696bc ]

Cabling used to connect devices to USBH1 on RDU2 does not meet USB
spec cable quality and cable length requirements to operate at High
Speed, so limit the port to Full Speed only.

Reported-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 56d6e82b75337..bc5f2de02d433 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -804,6 +804,7 @@
 &usbh1 {
 	vbus-supply = <&reg_5p0v_main>;
 	disable-over-current;
+	maximum-speed = "full-speed";
 	status = "okay";
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 114/252] ARM: dts: r8a7779: Add device node for ARM global timer

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 8443ffd1bbd5be74e9b12db234746d12e8ea93e2 ]

Add a device node for the global timer, which is part of the Cortex-A9
MPCore.

The global timer can serve as an accurate (4 ns) clock source for
scheduling and delay loops.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191211135222.26770-4-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/r8a7779.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 03919714645ae..f1c9b2bc542c5 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -68,6 +68,14 @@
 		      <0xf0000100 0x100>;
 	};
 
+	timer@f0000200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xf0000200 0x100>;
+		interrupts = <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&cpg_clocks R8A7779_CLK_ZS>;
+	};
+
 	timer@f0000600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0xf0000600 0x20>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 140/252] ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco

[Sasha Levin]

From: Benjamin Gaignard <benjamin.gaignard@st.com>

[ Upstream commit 0ff15a86d0c5a3f004fee2e92d65b88e56a3bc58 ]

Add a fixed regulator and use it as power supply for DSI panel.

Fixes: 18c8866266 ("ARM: dts: stm32: Add display support on stm32f469-disco")

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/stm32f469-disco.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 3ee768cb86fc9..eea979ef5512f 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -75,6 +75,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vdd_dsi: vdd-dsi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_dsi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	soc {
 		dma-ranges = <0xc0000000 0x0 0x10000000>;
 	};
@@ -154,6 +161,7 @@
 		compatible = "orisetech,otm8009a";
 		reg = <0>; /* dsi virtual channel (0..3) */
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_dsi>;
 		status = "okay";
 
 		port {
-- 
2.20.1

[PATCH AUTOSEL 4.19 148/252] ARM: dts: at91: sama5d3: fix maximum peripheral clock rates

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit ee0aa926ddb0bd8ba59e33e3803b3b5804e3f5da ]

Currently the maximum rate for peripheral clock is calculated based on a
typical 133MHz MCK. The maximum frequency is defined in the datasheet as a
ratio to MCK. Some sama5d3 platforms are using a 166MHz MCK. Update the
device trees to match the maximum rate based on 166MHz.

Reported-by: Karl Rudbæk Olsen <karl@micro-technic.com>
Fixes: d2e8190b7916 ("ARM: at91/dt: define sama5d3 clocks")
Link: https://lore.kernel.org/r/20200110172007.1253659-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sama5d3.dtsi      | 28 ++++++++++++++--------------
 arch/arm/boot/dts/sama5d3_can.dtsi  |  4 ++--
 arch/arm/boot/dts/sama5d3_uart.dtsi |  4 ++--
 3 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 1408fa4a62e44..d01464bfd5fc4 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1187,49 +1187,49 @@
 					usart0_clk: usart0_clk {
 						#clock-cells = <0>;
 						reg = <12>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart1_clk: usart1_clk {
 						#clock-cells = <0>;
 						reg = <13>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart2_clk: usart2_clk {
 						#clock-cells = <0>;
 						reg = <14>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart3_clk: usart3_clk {
 						#clock-cells = <0>;
 						reg = <15>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					uart0_clk: uart0_clk {
 						#clock-cells = <0>;
 						reg = <16>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					twi0_clk: twi0_clk {
 						reg = <18>;
 						#clock-cells = <0>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					twi1_clk: twi1_clk {
 						#clock-cells = <0>;
 						reg = <19>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					twi2_clk: twi2_clk {
 						#clock-cells = <0>;
 						reg = <20>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					mci0_clk: mci0_clk {
@@ -1245,19 +1245,19 @@
 					spi0_clk: spi0_clk {
 						#clock-cells = <0>;
 						reg = <24>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					spi1_clk: spi1_clk {
 						#clock-cells = <0>;
 						reg = <25>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					tcb0_clk: tcb0_clk {
 						#clock-cells = <0>;
 						reg = <26>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					pwm_clk: pwm_clk {
@@ -1268,7 +1268,7 @@
 					adc_clk: adc_clk {
 						#clock-cells = <0>;
 						reg = <29>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					dma0_clk: dma0_clk {
@@ -1299,13 +1299,13 @@
 					ssc0_clk: ssc0_clk {
 						#clock-cells = <0>;
 						reg = <38>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					ssc1_clk: ssc1_clk {
 						#clock-cells = <0>;
 						reg = <39>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					sha_clk: sha_clk {
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
index c5a3772741bf6..0fac79f75c06c 100644
--- a/arch/arm/boot/dts/sama5d3_can.dtsi
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -37,13 +37,13 @@
 					can0_clk: can0_clk {
 						#clock-cells = <0>;
 						reg = <40>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					can1_clk: can1_clk {
 						#clock-cells = <0>;
 						reg = <41>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index f599f8a5f664f..f6d301c16cb1b 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -42,13 +42,13 @@
 					uart0_clk: uart0_clk {
 						#clock-cells = <0>;
 						reg = <16>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					uart1_clk: uart1_clk {
 						#clock-cells = <0>;
 						reg = <17>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 				};
 			};
-- 
2.20.1

[PATCH AUTOSEL 4.19 149/252] ARM: dts: at91: sama5d3: define clock rate range for tcb1

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit a7e0f3fc01df4b1b7077df777c37feae8c9e8b6d ]

The clock rate range for the TCB1 clock is missing. define it in the device
tree.

Reported-by: Karl Rudbæk Olsen <karl@micro-technic.com>
Fixes: d2e8190b7916 ("ARM: at91/dt: define sama5d3 clocks")
Link: https://lore.kernel.org/r/20200110172007.1253659-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sama5d3_tcb1.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index cb30bdb1a9ca1..7a68d355ff720 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -23,6 +23,7 @@
 					tcb1_clk: tcb1_clk {
 						#clock-cells = <0>;
 						reg = <27>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 				};
 			};
-- 
2.20.1

[PATCH AUTOSEL 4.19 164/252] ARC: [plat-axs10x]: Add missing multicast filter number to GMAC node

[Sasha Levin]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit 7980dff398f86a618f502378fa27cf7e77449afa ]

Add a missing property to GMAC node so that multicast filtering works
correctly.

Fixes: 556cc1c5f528 ("ARC: [axs101] Add support for AXS101 SDP (software development platform)")
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/boot/dts/axs10x_mb.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 37bafd44e36d0..da10a569adf73 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -80,6 +80,7 @@
 			interrupt-names = "macirq";
 			phy-mode = "rgmii";
 			snps,pbl = < 32 >;
+			snps,multicast-filter-bins = <256>;
 			clocks = <&apbclk>;
 			clock-names = "stmmaceth";
 			max-speed = <100>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 210/252] ARM: dts: am43xx: add support for clkout1 clock

[Sasha Levin]

From: Tero Kristo <t-kristo@ti.com>

[ Upstream commit 01053dadb79d63b65f7b353e68b4b6ccf4effedb ]

clkout1 clock node and its generation tree was missing. Add this based
on the data on TRM and PRCM functional spec.

commit 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes") effectively
reverted this commit 8010f13a40d3 ("ARM: dts: am43xx: add support for
clkout1 clock") which is needed for the ov2659 camera sensor clock
definition hence it is being re-applied here.

Note that because of the current dts node name dependency for mapping to
clock domain, we must still use "clkout1-*ck" naming instead of generic
"clock@" naming for the node. And because of this, it's probably best to
apply the dts node addition together along with the other clock changes.

Fixes: 664ae1ab2536 ("ARM: dts: am43xx: add clkctrl nodes")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am43xx-clocks.dtsi | 54 ++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index a7037a4b4fd48..ce3c4196f173c 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -707,6 +707,60 @@
 		ti,bit-shift = <8>;
 		reg = <0x2a48>;
 	};
+
+	clkout1_osc_div_ck: clkout1-osc-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <20>;
+		ti,max-div = <4>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_mux_ck: clkout1-src2-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+			 <&dpll_mpu_m2_ck>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_mux_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <8>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_pre_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		ti,index-power-of-two;
+		reg = <0x4100>;
+	};
+
+	clkout1_mux_ck: clkout1-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
+			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x4100>;
+	};
+
+	clkout1_ck: clkout1-ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout1_mux_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x4100>;
+	};
 };
 
 &prcm {
-- 
2.20.1