* [PATCH v2] ARM: dts: imx6qdl-gw553x.dtsi: add lsm9ds1 iio imu/magn support
@ 2020-02-14 21:02 Robert Jones
2020-02-17 7:29 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Robert Jones @ 2020-02-14 21:02 UTC (permalink / raw)
To: Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer
Cc: Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
devicetree, linux-kernel, linux-arm-kernel, Robert Jones
Add one node for the accel/gyro i2c device and another for the separate
magnetometer device in the lsm9ds1.
Signed-off-by: Robert Jones <rjones@gateworks.com>
---
Changes in v2:
- Use generic node names
- alphabetize pinctrl entries
- shorten patch title prefix
arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 31 +++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index a1066897be18..ee85031c3916 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -173,6 +173,25 @@ &i2c2 {
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
+ magn@1c {
+ compatible = "st,lsm9ds1-magn";
+ reg = <0x1c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mag>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ imu@6a {
+ compatible = "st,lsm9ds1-imu";
+ reg = <0x6a>;
+ st,drdy-int-pin = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_imu>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
ltc3676: pmic@3c {
compatible = "lltc,ltc3676";
reg = <0x3c>;
@@ -426,6 +445,12 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
+ pinctrl_imu: imugrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
+ >;
+ };
+
pinctrl_ipu1_csi0: ipu1csi0grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
@@ -449,6 +474,12 @@ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
>;
};
+ pinctrl_mag: maggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ >;
+ };
+
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
--
2.25.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] ARM: dts: imx6qdl-gw553x.dtsi: add lsm9ds1 iio imu/magn support
2020-02-14 21:02 [PATCH v2] ARM: dts: imx6qdl-gw553x.dtsi: add lsm9ds1 iio imu/magn support Robert Jones
@ 2020-02-17 7:29 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2020-02-17 7:29 UTC (permalink / raw)
To: Robert Jones
Cc: Rob Herring, Mark Rutland, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team, devicetree, linux-kernel,
linux-arm-kernel
On Fri, Feb 14, 2020 at 01:02:41PM -0800, Robert Jones wrote:
> Add one node for the accel/gyro i2c device and another for the separate
> magnetometer device in the lsm9ds1.
>
> Signed-off-by: Robert Jones <rjones@gateworks.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-02-17 7:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-14 21:02 [PATCH v2] ARM: dts: imx6qdl-gw553x.dtsi: add lsm9ds1 iio imu/magn support Robert Jones
2020-02-17 7:29 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).