devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Masahisa Kojima <masahisa.kojima@linaro.org>
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, ardb@kernel.org,
	devicetree@vger.kernel.org, linux-integrity@vger.kernel.org,
	peterhuewe@gmx.de, jgg@ziepe.ca
Subject: Re: [PATCH v3 1/2] tpm: tis: add support for MMIO TPM on SynQuacer
Date: Wed, 8 Jul 2020 19:30:27 +0300	[thread overview]
Message-ID: <20200708163027.GC549022@linux.intel.com> (raw)
In-Reply-To: <20200708131424.18729-2-masahisa.kojima@linaro.org>

On Wed, Jul 08, 2020 at 10:14:23PM +0900, Masahisa Kojima wrote:
> When fitted, the SynQuacer platform exposes its SPI TPM via a MMIO
> window that is backed by the SPI command sequencer in the SPI bus
> controller. This arrangement has the limitation that only byte size
> accesses are supported, and so we'll need to provide a separate module
> that take this into account.
> 
> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
> Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
> ---
>  drivers/char/tpm/Kconfig             |  12 ++
>  drivers/char/tpm/Makefile            |   1 +
>  drivers/char/tpm/tpm_tis_synquacer.c | 196 +++++++++++++++++++++++++++
>  3 files changed, 209 insertions(+)
>  create mode 100644 drivers/char/tpm/tpm_tis_synquacer.c
> 
> diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
> index 58b4c573d176..a18c314da211 100644
> --- a/drivers/char/tpm/Kconfig
> +++ b/drivers/char/tpm/Kconfig
> @@ -74,6 +74,18 @@ config TCG_TIS_SPI_CR50
>  	  If you have a H1 secure module running Cr50 firmware on SPI bus,
>  	  say Yes and it will be accessible from within Linux.
>  
> +config TCG_TIS_SYNQUACER
> +	tristate "TPM Interface Specification 1.2 Interface / TPM 2.0 FIFO Interface (MMIO - SynQuacer)"
> +	depends on ARCH_SYNQUACER
> +	select TCG_TIS_CORE
> +	help
> +	  If you have a TPM security chip that is compliant with the
> +	  TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO
> +	  specification (TPM2.0) say Yes and it will be accessible from
> +	  within Linux on Socionext SynQuacer platform.
> +	  To compile this driver as a module, choose  M here;
> +	  the module will be called tpm_tis_synquacer.
> +
>  config TCG_TIS_I2C_ATMEL
>  	tristate "TPM Interface Specification 1.2 Interface (I2C - Atmel)"
>  	depends on I2C
> diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
> index 9567e5197f74..84db4fb3a9c9 100644
> --- a/drivers/char/tpm/Makefile
> +++ b/drivers/char/tpm/Makefile
> @@ -21,6 +21,7 @@ tpm-$(CONFIG_EFI) += eventlog/efi.o
>  tpm-$(CONFIG_OF) += eventlog/of.o
>  obj-$(CONFIG_TCG_TIS_CORE) += tpm_tis_core.o
>  obj-$(CONFIG_TCG_TIS) += tpm_tis.o
> +obj-$(CONFIG_TCG_TIS_SYNQUACER) += tpm_tis_synquacer.o
>  
>  obj-$(CONFIG_TCG_TIS_SPI) += tpm_tis_spi.o
>  tpm_tis_spi-y := tpm_tis_spi_main.o
> diff --git a/drivers/char/tpm/tpm_tis_synquacer.c b/drivers/char/tpm/tpm_tis_synquacer.c
> new file mode 100644
> index 000000000000..51f0aedcedcc
> --- /dev/null
> +++ b/drivers/char/tpm/tpm_tis_synquacer.c
> @@ -0,0 +1,196 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Linaro Ltd.
> + *
> + * This device driver implements MMIO TPM on SynQuacer Platform.
> + */
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/kernel.h>
> +#include "tpm.h"
> +#include "tpm_tis_core.h"
> +
> +struct tpm_info {

struct tpm_tis_synquacer_info

> +	struct resource res;
> +	/* irq > 0 means: use irq $irq;
> +	 * irq = 0 means: autoprobe for an irq;
> +	 * irq = -1 means: no irq support
> +	 */
> +	int irq;
> +};
> +
> +struct tpm_tis_tcg_phy {

struct tpm_tis_synquacer_phy

> +	struct tpm_tis_data priv;
> +	void __iomem *iobase;
> +};
> +
> +static inline struct tpm_tis_tcg_phy *to_tpm_tis_tcg_phy(struct tpm_tis_data *data)
> +{
> +	return container_of(data, struct tpm_tis_tcg_phy, priv);
> +}
> +
> +static int tpm_tcg_read_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
> +			      u8 *result)

tpm_tis_synquacer_read_bytes (similar suggestions to similar stuff that
follows).

> +{
> +	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
> +
> +	while (len--)
> +		*result++ = ioread8(phy->iobase + addr);
> +
> +	return 0;
> +}
> +
> +static int tpm_tcg_write_bytes(struct tpm_tis_data *data, u32 addr, u16 len,
> +			       const u8 *value)
> +{
> +	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
> +
> +	while (len--)
> +		iowrite8(*value++, phy->iobase + addr);
> +
> +	return 0;
> +}
> +
> +static int tpm_tcg_read16_bw(struct tpm_tis_data *data, u32 addr, u16 *result)
> +{
> +	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
> +
> +	/*
> +	 * Due to the limitation of SPI controller on SynQuacer,
> +	 * 16/32 bits access must be done in byte-wise and descending order.
> +	 */
> +	*result = (ioread8(phy->iobase + addr + 1) << 8) |
> +		  (ioread8(phy->iobase + addr));
> +
> +	return 0;
> +}
> +
> +static int tpm_tcg_read32_bw(struct tpm_tis_data *data, u32 addr, u32 *result)
> +{
> +	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
> +
> +	/*
> +	 * Due to the limitation of SPI controller on SynQuacer,
> +	 * 16/32 bits access must be done in byte-wise and descending order.
> +	 */
> +	*result = (ioread8(phy->iobase + addr + 3) << 24) |
> +		  (ioread8(phy->iobase + addr + 2) << 16) |
> +		  (ioread8(phy->iobase + addr + 1) << 8) |
> +		  (ioread8(phy->iobase + addr));
> +
> +	return 0;
> +}
> +
> +static int tpm_tcg_write32_bw(struct tpm_tis_data *data, u32 addr, u32 value)
> +{
> +	struct tpm_tis_tcg_phy *phy = to_tpm_tis_tcg_phy(data);
> +
> +	/*
> +	 * Due to the limitation of SPI controller on SynQuacer,
> +	 * 16/32 bits access must be done in byte-wise and descending order.
> +	 */
> +	iowrite8(value >> 24, phy->iobase + addr + 3);
> +	iowrite8(value >> 16, phy->iobase + addr + 2);
> +	iowrite8(value >> 8, phy->iobase + addr + 1);
> +	iowrite8(value, phy->iobase + addr);
> +
> +	return 0;
> +}
> +
> +static const struct tpm_tis_phy_ops tpm_tcg_bw = {
> +	.read_bytes	= tpm_tcg_read_bytes,
> +	.write_bytes	= tpm_tcg_write_bytes,
> +	.read16		= tpm_tcg_read16_bw,
> +	.read32		= tpm_tcg_read32_bw,
> +	.write32	= tpm_tcg_write32_bw,
> +};
> +
> +static int tpm_tis_synquacer_init(struct device *dev, struct tpm_info *tpm_info)
> +{
> +	struct tpm_tis_tcg_phy *phy;
> +	int irq = -1;
> +
> +	phy = devm_kzalloc(dev, sizeof(struct tpm_tis_tcg_phy), GFP_KERNEL);
> +	if (phy == NULL)
> +		return -ENOMEM;
> +
> +	phy->iobase = devm_ioremap_resource(dev, &tpm_info->res);
> +	if (IS_ERR(phy->iobase))
> +		return PTR_ERR(phy->iobase);
> +
> +	return tpm_tis_core_init(dev, &phy->priv, irq, &tpm_tcg_bw,
> +				 ACPI_HANDLE(dev));
> +}
> +
> +static SIMPLE_DEV_PM_OPS(tpm_tis_synquacer_pm, tpm_pm_suspend, tpm_tis_resume);
> +
> +static int tpm_tis_synquacer_probe(struct platform_device *pdev)
> +{
> +	struct tpm_info tpm_info = {};
> +	struct resource *res;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (res == NULL) {
> +		dev_err(&pdev->dev, "no memory resource defined\n");
> +		return -ENODEV;
> +	}
> +	tpm_info.res = *res;
> +
> +	tpm_info.irq = -1;
> +
> +	return tpm_tis_synquacer_init(&pdev->dev, &tpm_info);
> +}
> +
> +static int tpm_tis_synquacer_remove(struct platform_device *pdev)
> +{
> +	struct tpm_chip *chip = dev_get_drvdata(&pdev->dev);
> +
> +	tpm_chip_unregister(chip);
> +	tpm_tis_remove(chip);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id tis_synquacer_of_platform_match[] = {
> +	{.compatible = "socionext,synquacer-tpm-mmio"},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, tis_synquacer_of_platform_match);
> +#endif
> +
> +static struct platform_driver tis_synquacer_drv = {
> +	.probe = tpm_tis_synquacer_probe,
> +	.remove = tpm_tis_synquacer_remove,
> +	.driver = {
> +		.name		= "tpm_tis_synquacer",
> +		.pm		= &tpm_tis_synquacer_pm,
> +		.of_match_table = of_match_ptr(tis_synquacer_of_platform_match),
> +	},
> +};
> +
> +static int __init init_tis_synquacer(void)

tpm_tis_synquacer_module_init

> +{
> +	int rc;
> +
> +	rc = platform_driver_register(&tis_synquacer_drv);
> +	if (rc)
> +		return rc;
> +
> +	return 0;
> +}
> +
> +static void __exit cleanup_tis_synquacer(void)

tpm_tis_synquacer_module_exit

> +{
> +	platform_driver_unregister(&tis_synquacer_drv);
> +}
> +
> +module_init(init_tis_synquacer);
> +module_exit(cleanup_tis_synquacer);
> +MODULE_AUTHOR("Masahisa Kojima (masahisa.kojima@linaro.org)");
> +MODULE_DESCRIPTION("TPM MMIO Driver for Socionext SynQuacer platform");
> +MODULE_VERSION("2.0");
> +MODULE_LICENSE("GPL");
> -- 
> 2.20.1
> 

/Jarkko

  parent reply	other threads:[~2020-07-08 16:30 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-08 13:14 [PATCH v3 0/2] synquacer: add TPM support Masahisa Kojima
2020-07-08 13:14 ` [PATCH v3 1/2] tpm: tis: add support for MMIO TPM on SynQuacer Masahisa Kojima
2020-07-08 15:41   ` Ard Biesheuvel
2020-07-08 16:30   ` Jarkko Sakkinen [this message]
2020-07-08 23:39     ` Masahisa Kojima
2020-07-08 13:14 ` [PATCH v3 2/2] dt-bindings: Add SynQucer TPM MMIO as a trivial device Masahisa Kojima
2020-07-13 23:05   ` Rob Herring
2020-07-08 16:20 ` [PATCH v3 0/2] synquacer: add TPM support Jarkko Sakkinen
2020-07-08 23:34   ` Masahisa Kojima
2020-07-08 23:46     ` Masahisa Kojima
2020-07-09 12:00       ` Jarkko Sakkinen
2020-07-09 11:42     ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200708163027.GC549022@linux.intel.com \
    --to=jarkko.sakkinen@linux.intel.com \
    --cc=ardb@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=masahisa.kojima@linaro.org \
    --cc=peterhuewe@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).