[PATCH 1/2] dt-bindings: leds: add LED_FUNCTION for wlan2g/wlan5g

[PATCH 1/2] dt-bindings: leds: add LED_FUNCTION for wlan2g/wlan5g

[Adrian Schmutzler]

Many consumer "routers" have dedicated LEDs for specific WiFi bands,
e.g. one for 2.4 GHz and one for 5 GHz. These LEDs specifically
indicate the state of the relevant band, so the latter should be
included in the function name. LED_FUNCTION_WLAN will remain for
general cases or when the LED is used for more than one band.

This essentially equivalent to how we use LED_FUNCTION_LAN and
LED_FUNCTION_WAN instead of just having LED_FUNCTION_ETHERNET.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
 include/dt-bindings/leds/common.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h
index 52b619d44ba2..52db8a9032d0 100644
--- a/include/dt-bindings/leds/common.h
+++ b/include/dt-bindings/leds/common.h
@@ -89,6 +89,8 @@
 #define LED_FUNCTION_USB "usb"
 #define LED_FUNCTION_WAN "wan"
 #define LED_FUNCTION_WLAN "wlan"
+#define LED_FUNCTUON_WLAN2G "wlan2g"
+#define LED_FUNCTUON_WLAN5G "wlan5g"
 #define LED_FUNCTION_WPS "wps"
 
 #endif /* __DT_BINDINGS_LEDS_H */
-- 
2.20.1

[PATCH 2/2] dt-bindings: leds: add LED_FUNCTION_RSSI

[Adrian Schmutzler]

Several consumer "routers" and CPE devices have dedicated LEDs to
show the received signal strength indicator (RSSI). This is
different from the "WLAN" LEDs that just show enabled/disabled
state and sometimes rx/tx activity.

Add a LED function for these LEDs.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---
 include/dt-bindings/leds/common.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h
index 52db8a9032d0..139573579e7f 100644
--- a/include/dt-bindings/leds/common.h
+++ b/include/dt-bindings/leds/common.h
@@ -81,6 +81,7 @@
 #define LED_FUNCTION_MTD "mtd"
 #define LED_FUNCTION_PANIC "panic"
 #define LED_FUNCTION_PROGRAMMING "programming"
+#define LED_FUNCTION_RSSI "rssi"
 #define LED_FUNCTION_RX "rx"
 #define LED_FUNCTION_SD "sd"
 #define LED_FUNCTION_STANDBY "standby"
-- 
2.20.1