From: Ioana Ciornei <ioana.ciornei@nxp.com>
To: shawnguo@kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Ioana Ciornei <ioana.ciornei@nxp.com>
Subject: [PATCH 3/9] arm64: dts: ls1088ardb: add necessary DTS nodes for DPMAC2
Date: Fri, 25 Sep 2020 16:24:57 +0300 [thread overview]
Message-ID: <20200925132503.30206-4-ioana.ciornei@nxp.com> (raw)
In-Reply-To: <20200925132503.30206-1-ioana.ciornei@nxp.com>
Annotate the external MDIO2 node and describe the 10GBASER PHY found on
the LS1088ARDB board and add a phy-handle for DPMAC2 to link it.
Also, add the internal PCS MDIO node for the internal MDIO buses found
on the LS1088A SoC along with its internal PCS PHY and link the
corresponding DPMAC to the PCS through the pcs-handle.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
.../boot/dts/freescale/fsl-ls1088a-rdb.dts | 19 +++++++++++++++++++
.../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 13 +++++++++++++
2 files changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index d7886b084f7f..661898064f0c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -17,6 +17,12 @@ / {
compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
};
+&dpmac2 {
+ phy-handle = <&mdio2_aquantia_phy>;
+ phy-connection-type = "10gbase-r";
+ pcs-handle = <&pcs2>;
+};
+
&dpmac3 {
phy-handle = <&mdio1_phy5>;
phy-connection-type = "qsgmii";
@@ -109,6 +115,15 @@ mdio1_phy8: emdio1_phy@8 {
};
};
+&emdio2 {
+ status = "okay";
+
+ mdio2_aquantia_phy: emdio2_aquantia@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+};
+
&i2c0 {
status = "okay";
@@ -179,6 +194,10 @@ &esdhc {
status = "okay";
};
+&pcs_mdio2 {
+ status = "okay";
+};
+
&pcs_mdio3 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index ad8679e58f9a..837d53472000 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -672,6 +672,19 @@ emdio2: mdio@0x8B97000 {
status = "disabled";
};
+ pcs_mdio2: mdio@8c0b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c0b000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs2: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
pcs_mdio3: mdio@8c0f000 {
compatible = "fsl,fman-memac-mdio";
reg = <0x0 0x8c0f000 0x0 0x1000>;
--
2.25.1
next prev parent reply other threads:[~2020-09-25 13:34 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-25 13:24 [PATCH 0/9] arm64: dts: layerscape: update MAC nodes with PHY information Ioana Ciornei
2020-09-25 13:24 ` [PATCH 1/9] arm64: dts: ls1088a: add external MDIO device nodes Ioana Ciornei
2020-10-30 0:01 ` Shawn Guo
2020-10-30 9:26 ` Ioana Ciornei
2020-09-25 13:24 ` [PATCH 2/9] arm64: dts: ls1088ardb: add QSGMII PHY nodes Ioana Ciornei
2020-10-30 0:07 ` Shawn Guo
2020-10-30 9:32 ` Ioana Ciornei
2020-09-25 13:24 ` Ioana Ciornei [this message]
2020-09-25 13:24 ` [PATCH 4/9] arm64: dts: ls208xa: add the external MDIO nodes Ioana Ciornei
2020-09-25 13:24 ` [PATCH 5/9] arm64: dts: ls2088ardb: add PHY nodes for the CS4340 PHYs Ioana Ciornei
2020-10-30 0:10 ` Shawn Guo
2020-10-30 9:40 ` Ioana Ciornei
2020-09-25 13:25 ` [PATCH 6/9] arm64: dts: ls2088ardb: add PHY nodes for the AQR405 PHYs Ioana Ciornei
2020-09-25 13:25 ` [PATCH 7/9] arm64: dts: ls208xa: add PCS MDIO and PCS PHY nodes Ioana Ciornei
2020-09-25 13:25 ` [PATCH 8/9] arm64: dts: lx2160a: " Ioana Ciornei
2020-09-25 13:25 ` [PATCH 9/9] arm64: dts: lx2160ardb: add nodes for the AQR107 PHYs Ioana Ciornei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200925132503.30206-4-ioana.ciornei@nxp.com \
--to=ioana.ciornei@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).