[PATCH AUTOSEL 4.19 52/60] arm64: dts: renesas: ulcb: add full-pwr-cycle-in-suspend into eMMC nodes

[PATCH AUTOSEL 4.19 52/60] arm64: dts: renesas: ulcb: add full-pwr-cycle-in-suspend into eMMC nodes

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit 992d7a8b88c83c05664b649fc54501ce58e19132 ]

Add full-pwr-cycle-in-suspend property to do a graceful shutdown of
the eMMC device in system suspend.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1594989201-24228-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/ulcb.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 0ead552d7eae9..600adc25eaeff 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -430,6 +430,7 @@ &sdhi2 {
 	bus-width = <8>;
 	mmc-hs200-1_8v;
 	non-removable;
+	full-pwr-cycle-in-suspend;
 	status = "okay";
 };
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 53/60] ARM: dts: omap4: Fix sgx clock rate for 4430

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 19d3e9a0bdd57b90175f30390edeb06851f5f9f3 ]

We currently have a different clock rate for droid4 compared to the
stock v3.0.8 based Android Linux kernel:

# cat /sys/kernel/debug/clk/dpll_*_m7x2_ck/clk_rate
266666667
307200000
# cat /sys/kernel/debug/clk/l3_gfx_cm:clk:0000:0/clk_rate
307200000

Let's fix this by configuring sgx to use 153.6 MHz instead of 307.2 MHz.
Looks like also at least duover needs this change to avoid hangs, so
let's apply it for all 4430.

This helps a bit with thermal issues that seem to be related to memory
corruption when using sgx. It seems that other driver related issues
still remain though.

Cc: Arthur Demchenkov <spinal.by@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap4.dtsi    |  2 +-
 arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 1a96d4317c975..8f907c235b02c 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -516,7 +516,7 @@ abb_iva: regulator-abb-iva {
 			status = "disabled";
 		};
 
-		target-module@56000000 {
+		sgx_module: target-module@56000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			ti,hwmods = "gpu";
 			reg = <0x5601fc00 0x4>,
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index cbcdcb4e7d1c2..86b9caf461dfa 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -74,3 +74,13 @@ &cpu_thermal {
 };
 
 /include/ "omap443x-clocks.dtsi"
+
+/*
+ * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel
+ */
+&sgx_module {
+	assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+			  <&dpll_per_m7x2_ck>;
+	assigned-clock-rates = <0>, <153600000>;
+	assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};
-- 
2.25.1

[PATCH AUTOSEL 4.19 55/60] ARM: dts: s5pv210: remove DMA controller bus node name to fix dtschema warnings

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit ea4e792f3c8931fffec4d700cf6197d84e9f35a6 ]

There is no need to keep DMA controller nodes under AMBA bus node.
Remove the "amba" node to fix dtschema warnings like:

  amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-6-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/s5pv210.dtsi | 49 +++++++++++++++-------------------
 1 file changed, 21 insertions(+), 28 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 67358562a6ea2..67f70683a2c45 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -126,35 +126,28 @@ wakeup-interrupt-controller {
 			};
 		};
 
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges;
-
-			pdma0: dma@e0900000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0900000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <19>;
-				clocks = <&clocks CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: dma@e0900000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0900000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <19>;
+			clocks = <&clocks CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
 
-			pdma1: dma@e0a00000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0a00000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <20>;
-				clocks = <&clocks CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma1: dma@e0a00000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0a00000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <20>;
+			clocks = <&clocks CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		spi0: spi@e1300000 {
-- 
2.25.1

[PATCH AUTOSEL 4.19 56/60] ARM: dts: s5pv210: move PMU node out of clock controller

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit bb98fff84ad1ea321823759edaba573a16fa02bd ]

The Power Management Unit (PMU) is a separate device which has little
common with clock controller.  Moving it to one level up (from clock
controller child to SoC) allows to remove fake simple-bus compatible and
dtbs_check warnings like:

  clock-controller@e0100000: $nodename:0:
    'clock-controller@e0100000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-8-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/s5pv210.dtsi | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 67f70683a2c45..37d251b1f74a7 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -98,19 +98,16 @@ chipid@e0000000 {
 		};
 
 		clocks: clock-controller@e0100000 {
-			compatible = "samsung,s5pv210-clock", "simple-bus";
+			compatible = "samsung,s5pv210-clock";
 			reg = <0xe0100000 0x10000>;
 			clock-names = "xxti", "xusbxti";
 			clocks = <&xxti>, <&xusbxti>;
 			#clock-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+		};
 
-			pmu_syscon: syscon@e0108000 {
-				compatible = "samsung-s5pv210-pmu", "syscon";
-				reg = <0xe0108000 0x8000>;
-			};
+		pmu_syscon: syscon@e0108000 {
+			compatible = "samsung-s5pv210-pmu", "syscon";
+			reg = <0xe0108000 0x8000>;
 		};
 
 		pinctrl0: pinctrl@e0200000 {
-- 
2.25.1

[PATCH AUTOSEL 4.19 57/60] ARM: dts: s5pv210: remove dedicated 'audio-subsystem' node

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 6c17a2974abf68a58517f75741b15c4aba42b4b8 ]

The 'audio-subsystem' node is an artificial creation, not representing
real hardware.  The hardware is described by its nodes - AUDSS clock
controller and I2S0.

Remove the 'audio-subsystem' node along with its undocumented compatible
to fix dtbs_check warnings like:

  audio-subsystem: $nodename:0: 'audio-subsystem' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-9-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/s5pv210.dtsi | 65 +++++++++++++++-------------------
 1 file changed, 29 insertions(+), 36 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 37d251b1f74a7..020a864623ff4 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -217,43 +217,36 @@ i2c2: i2c@e1a00000 {
 			status = "disabled";
 		};
 
-		audio-subsystem {
-			compatible = "samsung,s5pv210-audss", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clk_audss: clock-controller@eee10000 {
-				compatible = "samsung,s5pv210-audss-clock";
-				reg = <0xeee10000 0x1000>;
-				clock-names = "hclk", "xxti",
-						"fout_epll",
-						"sclk_audio0";
-				clocks = <&clocks DOUT_HCLKP>, <&xxti>,
-						<&clocks FOUT_EPLL>,
-						<&clocks SCLK_AUDIO0>;
-				#clock-cells = <1>;
-			};
+		clk_audss: clock-controller@eee10000 {
+			compatible = "samsung,s5pv210-audss-clock";
+			reg = <0xeee10000 0x1000>;
+			clock-names = "hclk", "xxti",
+				      "fout_epll",
+				      "sclk_audio0";
+			clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+				 <&clocks FOUT_EPLL>,
+				 <&clocks SCLK_AUDIO0>;
+			#clock-cells = <1>;
+		};
 
-			i2s0: i2s@eee30000 {
-				compatible = "samsung,s5pv210-i2s";
-				reg = <0xeee30000 0x1000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <16>;
-				dma-names = "rx", "tx", "tx-sec";
-				dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
-				clock-names = "iis",
-						"i2s_opclk0",
-						"i2s_opclk1";
-				clocks = <&clk_audss CLK_I2S>,
-						<&clk_audss CLK_I2S>,
-						<&clk_audss CLK_DOUT_AUD_BUS>;
-				samsung,idma-addr = <0xc0010000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2s0_bus>;
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
+		i2s0: i2s@eee30000 {
+			compatible = "samsung,s5pv210-i2s";
+			reg = <0xeee30000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <16>;
+			dma-names = "rx", "tx", "tx-sec";
+			dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+			clock-names = "iis",
+				      "i2s_opclk0",
+				      "i2s_opclk1";
+			clocks = <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_DOUT_AUD_BUS>;
+			samsung,idma-addr = <0xc0010000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
 		};
 
 		i2s1: i2s@e2100000 {
-- 
2.25.1