* [PATCH v2 04/34] dt-bindings: Add bindings for Keem Bay IPC driver [not found] <20210108212600.36850-1-mgross@linux.intel.com> @ 2021-01-08 21:25 ` mgross 2021-01-08 21:25 ` [PATCH v2 06/34] dt-bindings: Add bindings for Keem Bay VPU " mgross ` (2 subsequent siblings) 3 siblings, 0 replies; 10+ messages in thread From: mgross @ 2021-01-08 21:25 UTC (permalink / raw) To: markgross, mgross, arnd, bp, damien.lemoal, dragan.cvetic, gregkh, corbet, leonard.crestez, palmerdabbelt, paul.walmsley, peng.fan, robh+dt, shawnguo, jassisinghbrar Cc: linux-kernel, Daniele Alessandrelli, devicetree From: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Add DT binding documentation for the Intel Keem Bay IPC driver, which enables communication between the Computing Sub-System (CSS) and the Multimedia Sub-System (MSS) of the Intel Movidius SoC code named Keem Bay. Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Reviewed-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> --- .../bindings/soc/intel/intel,keembay-ipc.yaml | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,keembay-ipc.yaml diff --git a/Documentation/devicetree/bindings/soc/intel/intel,keembay-ipc.yaml b/Documentation/devicetree/bindings/soc/intel/intel,keembay-ipc.yaml new file mode 100644 index 000000000000..586fe73f4cd4 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/intel/intel,keembay-ipc.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Intel Corporation +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/intel/intel,keembay-ipc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Keem Bay IPC + +maintainers: + - Daniele Alessandrelli <daniele.alessandrelli@intel.com> + +description: + The Keem Bay IPC driver enables Inter-Processor Communication (IPC) with the + Visual Processor Unit (VPU) embedded in the Intel Movidius SoC code named + Keem Bay. + +properties: + compatible: + const: intel,keembay-ipc + + memory-region: + items: + - description: + Reserved memory region used by the CPU to allocate IPC packets. + - description: + Reserved memory region used by the VPU to allocate IPC packets. + + mboxes: + description: VPU IPC Mailbox. + +required: + - compatible + - memory-region + - mboxes + +additionalProperties: false + +examples: + - | + ipc { + compatible = "intel,keembay-ipc"; + memory-region = <&ipc_cpu_reserved>, <&ipc_vpu_reserved>; + mboxes = <&vpu_ipc_mbox 0>; + }; -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 06/34] dt-bindings: Add bindings for Keem Bay VPU IPC driver [not found] <20210108212600.36850-1-mgross@linux.intel.com> 2021-01-08 21:25 ` [PATCH v2 04/34] dt-bindings: Add bindings for Keem Bay IPC driver mgross @ 2021-01-08 21:25 ` mgross 2021-01-10 17:18 ` Rob Herring 2021-01-11 19:24 ` Rob Herring 2021-01-08 21:25 ` [PATCH v2 17/34] xlink-ipc: Add xlink ipc device tree bindings mgross 2021-01-08 21:25 ` [PATCH v2 19/34] xlink-core: Add xlink core " mgross 3 siblings, 2 replies; 10+ messages in thread From: mgross @ 2021-01-08 21:25 UTC (permalink / raw) To: markgross, mgross, arnd, bp, damien.lemoal, dragan.cvetic, gregkh, corbet, leonard.crestez, palmerdabbelt, paul.walmsley, peng.fan, robh+dt, shawnguo, jassisinghbrar Cc: linux-kernel, Paul Murphy, devicetree, Daniele Alessandrelli From: Paul Murphy <paul.j.murphy@intel.com> Add DT bindings documentation for the Keem Bay VPU IPC driver. Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Reviewed-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Paul Murphy <paul.j.murphy@intel.com> Co-developed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> --- .../soc/intel/intel,keembay-vpu-ipc.yaml | 153 ++++++++++++++++++ 1 file changed, 153 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml diff --git a/Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml b/Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml new file mode 100644 index 000000000000..cd1c4abe8bc9 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) Intel Corporation. All rights reserved. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/intel/intel,keembay-vpu-ipc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel Keem Bay VPU IPC + +maintainers: + - Paul Murphy <paul.j.murphy@intel.com> + +description: + The VPU IPC driver facilitates loading of firmware, control, and communication + with the VPU over the IPC FIFO in the Intel Keem Bay SoC. + +properties: + compatible: + oneOf: + - items: + - const: intel,keembay-vpu-ipc + + reg: + items: + - description: NCE WDT registers + - description: NCE TIM_GEN_CONFIG registers + - description: MSS WDT registers + - description: MSS TIM_GEN_CONFIG registers + + reg-names: + items: + - const: nce_wdt + - const: nce_tim_cfg + - const: mss_wdt + - const: mss_tim_cfg + + memory-region: + items: + - description: reference to the VPU reserved memory region + - description: reference to the X509 reserved memory region + - description: reference to the MSS IPC area + + clocks: + items: + - description: cpu clock + - description: pll 0 out 0 rate + - description: pll 0 out 1 rate + - description: pll 0 out 2 rate + - description: pll 0 out 3 rate + - description: pll 1 out 0 rate + - description: pll 1 out 1 rate + - description: pll 1 out 2 rate + - description: pll 1 out 3 rate + - description: pll 2 out 0 rate + - description: pll 2 out 1 rate + - description: pll 2 out 2 rate + - description: pll 2 out 3 rate + + clock-names: + items: + - const: cpu_clock + - const: pll_0_out_0 + - const: pll_0_out_1 + - const: pll_0_out_2 + - const: pll_0_out_3 + - const: pll_1_out_0 + - const: pll_1_out_1 + - const: pll_1_out_2 + - const: pll_1_out_3 + - const: pll_2_out_0 + - const: pll_2_out_1 + - const: pll_2_out_2 + - const: pll_2_out_3 + + interrupts: + items: + - description: number of NCE sub-system WDT timeout IRQ + - description: number of MSS sub-system WDT timeout IRQ + + interrupt-names: + items: + - const: nce_wdt + - const: mss_wdt + + intel,keembay-vpu-ipc-nce-wdt-redirect: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: + Number to which we will request that the NCE sub-system + re-directs it's WDT timeout IRQ + + intel,keembay-vpu-ipc-mss-wdt-redirect: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: + Number to which we will request that the MSS sub-system + re-directs it's WDT timeout IRQ + + intel,keembay-vpu-ipc-imr: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: + IMR (isolated memory region) number which we will request + the runtime service uses to protect the VPU memory region + before authentication + + intel,keembay-vpu-ipc-id: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: The VPU ID to be passed to the VPU firmware. + +additionalProperties: False + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + vpu-ipc@3f00209c { + compatible = "intel,keembay-vpu-ipc"; + reg = <0x3f00209c 0x10>, + <0x3f003008 0x4>, + <0x2082009c 0x10>, + <0x20821008 0x4>; + reg-names = "nce_wdt", + "nce_tim_cfg", + "mss_wdt", + "mss_tim_cfg"; + memory-region = <&vpu_reserved>, + <&vpu_x509_reserved>, + <&mss_ipc_reserved>; + clocks = <&scmi_clk 0>, + <&scmi_clk 0>, + <&scmi_clk 1>, + <&scmi_clk 2>, + <&scmi_clk 3>, + <&scmi_clk 4>, + <&scmi_clk 5>, + <&scmi_clk 6>, + <&scmi_clk 7>, + <&scmi_clk 8>, + <&scmi_clk 9>, + <&scmi_clk 10>, + <&scmi_clk 11>; + clock-names = "cpu_clock", + "pll_0_out_0", "pll_0_out_1", + "pll_0_out_2", "pll_0_out_3", + "pll_1_out_0", "pll_1_out_1", + "pll_1_out_2", "pll_1_out_3", + "pll_2_out_0", "pll_2_out_1", + "pll_2_out_2", "pll_2_out_3"; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "nce_wdt", "mss_wdt"; + intel,keembay-vpu-ipc-nce-wdt-redirect = <63>; + intel,keembay-vpu-ipc-mss-wdt-redirect = <47>; + intel,keembay-vpu-ipc-imr = <9>; + intel,keembay-vpu-ipc-id = <0>; + }; -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2 06/34] dt-bindings: Add bindings for Keem Bay VPU IPC driver 2021-01-08 21:25 ` [PATCH v2 06/34] dt-bindings: Add bindings for Keem Bay VPU " mgross @ 2021-01-10 17:18 ` Rob Herring 2021-01-11 19:24 ` Rob Herring 1 sibling, 0 replies; 10+ messages in thread From: Rob Herring @ 2021-01-10 17:18 UTC (permalink / raw) To: mgross Cc: markgross, dragan.cvetic, bp, Paul Murphy, paul.walmsley, arnd, devicetree, damien.lemoal, leonard.crestez, robh+dt, shawnguo, Daniele Alessandrelli, linux-kernel, palmerdabbelt, corbet, peng.fan, gregkh, jassisinghbrar On Fri, 08 Jan 2021 13:25:32 -0800, mgross@linux.intel.com wrote: > From: Paul Murphy <paul.j.murphy@intel.com> > > Add DT bindings documentation for the Keem Bay VPU IPC driver. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: devicetree@vger.kernel.org > Reviewed-by: Mark Gross <mgross@linux.intel.com> > Signed-off-by: Paul Murphy <paul.j.murphy@intel.com> > Co-developed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> > Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> > --- > .../soc/intel/intel,keembay-vpu-ipc.yaml | 153 ++++++++++++++++++ > 1 file changed, 153 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml:21:9: [warning] wrong indentation: expected 10 but found 8 (indentation) dtschema/dtc warnings/errors: See https://patchwork.ozlabs.org/patch/1423960 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 06/34] dt-bindings: Add bindings for Keem Bay VPU IPC driver 2021-01-08 21:25 ` [PATCH v2 06/34] dt-bindings: Add bindings for Keem Bay VPU " mgross 2021-01-10 17:18 ` Rob Herring @ 2021-01-11 19:24 ` Rob Herring 2021-01-19 14:32 ` Alessandrelli, Daniele 1 sibling, 1 reply; 10+ messages in thread From: Rob Herring @ 2021-01-11 19:24 UTC (permalink / raw) To: mgross Cc: markgross, arnd, bp, damien.lemoal, dragan.cvetic, gregkh, corbet, leonard.crestez, palmerdabbelt, paul.walmsley, peng.fan, shawnguo, jassisinghbrar, linux-kernel, Paul Murphy, devicetree, Daniele Alessandrelli On Fri, Jan 08, 2021 at 01:25:32PM -0800, mgross@linux.intel.com wrote: > From: Paul Murphy <paul.j.murphy@intel.com> > > Add DT bindings documentation for the Keem Bay VPU IPC driver. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: devicetree@vger.kernel.org > Reviewed-by: Mark Gross <mgross@linux.intel.com> > Signed-off-by: Paul Murphy <paul.j.murphy@intel.com> > Co-developed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> > Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Needs your Sob. > --- > .../soc/intel/intel,keembay-vpu-ipc.yaml | 153 ++++++++++++++++++ This doesn't fit somewhere else? > 1 file changed, 153 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml > > diff --git a/Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml b/Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml > new file mode 100644 > index 000000000000..cd1c4abe8bc9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml > @@ -0,0 +1,153 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright (c) Intel Corporation. All rights reserved. > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/soc/intel/intel,keembay-vpu-ipc.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Intel Keem Bay VPU IPC > + > +maintainers: > + - Paul Murphy <paul.j.murphy@intel.com> > + > +description: > + The VPU IPC driver facilitates loading of firmware, control, and communication > + with the VPU over the IPC FIFO in the Intel Keem Bay SoC. VPU is never defined. Bindings are for h/w blocks, not drivers. > + > +properties: > + compatible: > + oneOf: > + - items: > + - const: intel,keembay-vpu-ipc > + > + reg: > + items: > + - description: NCE WDT registers > + - description: NCE TIM_GEN_CONFIG registers > + - description: MSS WDT registers > + - description: MSS TIM_GEN_CONFIG registers > + > + reg-names: > + items: > + - const: nce_wdt > + - const: nce_tim_cfg > + - const: mss_wdt > + - const: mss_tim_cfg > + > + memory-region: > + items: > + - description: reference to the VPU reserved memory region > + - description: reference to the X509 reserved memory region > + - description: reference to the MSS IPC area > + > + clocks: > + items: > + - description: cpu clock > + - description: pll 0 out 0 rate > + - description: pll 0 out 1 rate > + - description: pll 0 out 2 rate > + - description: pll 0 out 3 rate > + - description: pll 1 out 0 rate > + - description: pll 1 out 1 rate > + - description: pll 1 out 2 rate > + - description: pll 1 out 3 rate > + - description: pll 2 out 0 rate > + - description: pll 2 out 1 rate > + - description: pll 2 out 2 rate > + - description: pll 2 out 3 rate > + > + clock-names: > + items: > + - const: cpu_clock > + - const: pll_0_out_0 > + - const: pll_0_out_1 > + - const: pll_0_out_2 > + - const: pll_0_out_3 > + - const: pll_1_out_0 > + - const: pll_1_out_1 > + - const: pll_1_out_2 > + - const: pll_1_out_3 > + - const: pll_2_out_0 > + - const: pll_2_out_1 > + - const: pll_2_out_2 > + - const: pll_2_out_3 > + > + interrupts: > + items: > + - description: number of NCE sub-system WDT timeout IRQ > + - description: number of MSS sub-system WDT timeout IRQ > + > + interrupt-names: > + items: > + - const: nce_wdt > + - const: mss_wdt > + > + intel,keembay-vpu-ipc-nce-wdt-redirect: > + $ref: "/schemas/types.yaml#/definitions/uint32" > + description: > + Number to which we will request that the NCE sub-system > + re-directs it's WDT timeout IRQ > + > + intel,keembay-vpu-ipc-mss-wdt-redirect: > + $ref: "/schemas/types.yaml#/definitions/uint32" > + description: > + Number to which we will request that the MSS sub-system > + re-directs it's WDT timeout IRQ These look like the same value as the interrupt numbers? > + > + intel,keembay-vpu-ipc-imr: > + $ref: "/schemas/types.yaml#/definitions/uint32" > + description: > + IMR (isolated memory region) number which we will request > + the runtime service uses to protect the VPU memory region > + before authentication > + > + intel,keembay-vpu-ipc-id: > + $ref: "/schemas/types.yaml#/definitions/uint32" > + description: The VPU ID to be passed to the VPU firmware. > + > +additionalProperties: False > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + vpu-ipc@3f00209c { > + compatible = "intel,keembay-vpu-ipc"; > + reg = <0x3f00209c 0x10>, > + <0x3f003008 0x4>, > + <0x2082009c 0x10>, > + <0x20821008 0x4>; > + reg-names = "nce_wdt", > + "nce_tim_cfg", > + "mss_wdt", > + "mss_tim_cfg"; > + memory-region = <&vpu_reserved>, > + <&vpu_x509_reserved>, > + <&mss_ipc_reserved>; > + clocks = <&scmi_clk 0>, > + <&scmi_clk 0>, > + <&scmi_clk 1>, > + <&scmi_clk 2>, > + <&scmi_clk 3>, > + <&scmi_clk 4>, > + <&scmi_clk 5>, > + <&scmi_clk 6>, > + <&scmi_clk 7>, > + <&scmi_clk 8>, > + <&scmi_clk 9>, > + <&scmi_clk 10>, > + <&scmi_clk 11>; > + clock-names = "cpu_clock", > + "pll_0_out_0", "pll_0_out_1", > + "pll_0_out_2", "pll_0_out_3", > + "pll_1_out_0", "pll_1_out_1", > + "pll_1_out_2", "pll_1_out_3", > + "pll_2_out_0", "pll_2_out_1", > + "pll_2_out_2", "pll_2_out_3"; > + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "nce_wdt", "mss_wdt"; > + intel,keembay-vpu-ipc-nce-wdt-redirect = <63>; > + intel,keembay-vpu-ipc-mss-wdt-redirect = <47>; > + intel,keembay-vpu-ipc-imr = <9>; > + intel,keembay-vpu-ipc-id = <0>; > + }; > -- > 2.17.1 > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 06/34] dt-bindings: Add bindings for Keem Bay VPU IPC driver 2021-01-11 19:24 ` Rob Herring @ 2021-01-19 14:32 ` Alessandrelli, Daniele 0 siblings, 0 replies; 10+ messages in thread From: Alessandrelli, Daniele @ 2021-01-19 14:32 UTC (permalink / raw) To: robh, mgross Cc: corbet, palmerdabbelt, peng.fan, damien.lemoal, bp, leonard.crestez, markgross, linux-kernel, Murphy, Paul J, shawnguo, devicetree, paul.walmsley, arnd, jassisinghbrar, gregkh, dragan.cvetic Hi Rob, Thanks for your review. On Mon, 2021-01-11 at 13:24 -0600, Rob Herring wrote: > On Fri, Jan 08, 2021 at 01:25:32PM -0800, mgross@linux.intel.com > wrote: > > From: Paul Murphy <paul.j.murphy@intel.com> > > > > Add DT bindings documentation for the Keem Bay VPU IPC driver. > > > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: devicetree@vger.kernel.org > > Reviewed-by: Mark Gross <mgross@linux.intel.com> > > Signed-off-by: Paul Murphy <paul.j.murphy@intel.com> > > Co-developed-by: Daniele Alessandrelli < > > daniele.alessandrelli@intel.com> > > Signed-off-by: Daniele Alessandrelli < > > daniele.alessandrelli@intel.com> > > Needs your Sob. > > > --- > > .../soc/intel/intel,keembay-vpu-ipc.yaml | 153 > > ++++++++++++++++++ > > This doesn't fit somewhere else? It's quite a SoC-specific driver, designed to control (start, stop, monitor, etc) the Vision Processing Unit (VPU) integrated in the Keem Bay SoC. Do you think it would fit better somewhere else? > > > 1 file changed, 153 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu- > > ipc.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu- > > ipc.yaml > > b/Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu- > > ipc.yaml > > new file mode 100644 > > index 000000000000..cd1c4abe8bc9 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/soc/intel/intel,keembay- > > vpu-ipc.yaml > > @@ -0,0 +1,153 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +# Copyright (c) Intel Corporation. All rights reserved. > > +%YAML 1.2 > > +--- > > +$id: " > > http://devicetree.org/schemas/soc/intel/intel,keembay-vpu-ipc.yaml# > > " > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > > + > > +title: Intel Keem Bay VPU IPC > > + > > +maintainers: > > + - Paul Murphy <paul.j.murphy@intel.com> > > + > > +description: > > + The VPU IPC driver facilitates loading of firmware, control, and > > communication > > + with the VPU over the IPC FIFO in the Intel Keem Bay SoC. > > VPU is never defined. We'll spell out the acronym in v3. Anyway, VPU = Vision Processing Unit > > Bindings are for h/w blocks, not drivers. Will be fixed in v3 > > > + > > +properties: > > + compatible: > > + oneOf: > > + - items: > > + - const: intel,keembay-vpu-ipc > > + > > + reg: > > + items: > > + - description: NCE WDT registers > > + - description: NCE TIM_GEN_CONFIG registers > > + - description: MSS WDT registers > > + - description: MSS TIM_GEN_CONFIG registers > > + > > + reg-names: > > + items: > > + - const: nce_wdt > > + - const: nce_tim_cfg > > + - const: mss_wdt > > + - const: mss_tim_cfg > > + > > + memory-region: > > + items: > > + - description: reference to the VPU reserved memory region > > + - description: reference to the X509 reserved memory region > > + - description: reference to the MSS IPC area > > + > > + clocks: > > + items: > > + - description: cpu clock > > + - description: pll 0 out 0 rate > > + - description: pll 0 out 1 rate > > + - description: pll 0 out 2 rate > > + - description: pll 0 out 3 rate > > + - description: pll 1 out 0 rate > > + - description: pll 1 out 1 rate > > + - description: pll 1 out 2 rate > > + - description: pll 1 out 3 rate > > + - description: pll 2 out 0 rate > > + - description: pll 2 out 1 rate > > + - description: pll 2 out 2 rate > > + - description: pll 2 out 3 rate > > + > > + clock-names: > > + items: > > + - const: cpu_clock > > + - const: pll_0_out_0 > > + - const: pll_0_out_1 > > + - const: pll_0_out_2 > > + - const: pll_0_out_3 > > + - const: pll_1_out_0 > > + - const: pll_1_out_1 > > + - const: pll_1_out_2 > > + - const: pll_1_out_3 > > + - const: pll_2_out_0 > > + - const: pll_2_out_1 > > + - const: pll_2_out_2 > > + - const: pll_2_out_3 > > + > > + interrupts: > > + items: > > + - description: number of NCE sub-system WDT timeout IRQ > > + - description: number of MSS sub-system WDT timeout IRQ > > + > > + interrupt-names: > > + items: > > + - const: nce_wdt > > + - const: mss_wdt > > + > > + intel,keembay-vpu-ipc-nce-wdt-redirect: > > + $ref: "/schemas/types.yaml#/definitions/uint32" > > + description: > > + Number to which we will request that the NCE sub-system > > + re-directs it's WDT timeout IRQ > > + > > + intel,keembay-vpu-ipc-mss-wdt-redirect: > > + $ref: "/schemas/types.yaml#/definitions/uint32" > > + description: > > + Number to which we will request that the MSS sub-system > > + re-directs it's WDT timeout IRQ > > These look like the same value as the interrupt numbers? That's a very good point. We'll drop these additional properties and re-use the interrupt numbers. > > > + > > + intel,keembay-vpu-ipc-imr: > > + $ref: "/schemas/types.yaml#/definitions/uint32" > > + description: > > + IMR (isolated memory region) number which we will request > > + the runtime service uses to protect the VPU memory region > > + before authentication > > + > > + intel,keembay-vpu-ipc-id: > > + $ref: "/schemas/types.yaml#/definitions/uint32" > > + description: The VPU ID to be passed to the VPU firmware. > > + > > +additionalProperties: False > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + vpu-ipc@3f00209c { > > + compatible = "intel,keembay-vpu-ipc"; > > + reg = <0x3f00209c 0x10>, > > + <0x3f003008 0x4>, > > + <0x2082009c 0x10>, > > + <0x20821008 0x4>; > > + reg-names = "nce_wdt", > > + "nce_tim_cfg", > > + "mss_wdt", > > + "mss_tim_cfg"; > > + memory-region = <&vpu_reserved>, > > + <&vpu_x509_reserved>, > > + <&mss_ipc_reserved>; > > + clocks = <&scmi_clk 0>, > > + <&scmi_clk 0>, > > + <&scmi_clk 1>, > > + <&scmi_clk 2>, > > + <&scmi_clk 3>, > > + <&scmi_clk 4>, > > + <&scmi_clk 5>, > > + <&scmi_clk 6>, > > + <&scmi_clk 7>, > > + <&scmi_clk 8>, > > + <&scmi_clk 9>, > > + <&scmi_clk 10>, > > + <&scmi_clk 11>; > > + clock-names = "cpu_clock", > > + "pll_0_out_0", "pll_0_out_1", > > + "pll_0_out_2", "pll_0_out_3", > > + "pll_1_out_0", "pll_1_out_1", > > + "pll_1_out_2", "pll_1_out_3", > > + "pll_2_out_0", "pll_2_out_1", > > + "pll_2_out_2", "pll_2_out_3"; > > + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-names = "nce_wdt", "mss_wdt"; > > + intel,keembay-vpu-ipc-nce-wdt-redirect = <63>; > > + intel,keembay-vpu-ipc-mss-wdt-redirect = <47>; > > + intel,keembay-vpu-ipc-imr = <9>; > > + intel,keembay-vpu-ipc-id = <0>; > > + }; > > -- > > 2.17.1 > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 17/34] xlink-ipc: Add xlink ipc device tree bindings [not found] <20210108212600.36850-1-mgross@linux.intel.com> 2021-01-08 21:25 ` [PATCH v2 04/34] dt-bindings: Add bindings for Keem Bay IPC driver mgross 2021-01-08 21:25 ` [PATCH v2 06/34] dt-bindings: Add bindings for Keem Bay VPU " mgross @ 2021-01-08 21:25 ` mgross 2021-01-10 17:18 ` Rob Herring 2021-01-08 21:25 ` [PATCH v2 19/34] xlink-core: Add xlink core " mgross 3 siblings, 1 reply; 10+ messages in thread From: mgross @ 2021-01-08 21:25 UTC (permalink / raw) To: markgross, mgross, arnd, bp, damien.lemoal, dragan.cvetic, gregkh, corbet, leonard.crestez, palmerdabbelt, paul.walmsley, peng.fan, robh+dt, shawnguo, jassisinghbrar Cc: linux-kernel, Seamus Kelly, devicetree, Ryan Carnaghi From: Seamus Kelly <seamus.kelly@intel.com> Add device tree bindings for the xLink IPC driver which enables xLink to control and communicate with the VPU IP present on the Intel Keem Bay SoC. Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Reviewed-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Seamus Kelly <seamus.kelly@intel.com> Signed-off-by: Ryan Carnaghi <ryan.r.carnaghi@intel.com> --- .../misc/intel,keembay-xlink-ipc.yaml | 49 +++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/intel,keembay-xlink-ipc.yaml diff --git a/Documentation/devicetree/bindings/misc/intel,keembay-xlink-ipc.yaml b/Documentation/devicetree/bindings/misc/intel,keembay-xlink-ipc.yaml new file mode 100644 index 000000000000..699e43c4cd40 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/intel,keembay-xlink-ipc.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) Intel Corporation. All rights reserved. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/misc/intel,keembay-xlink-ipc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel Keem Bay xlink IPC + +maintainers: + - Kelly Seamus <seamus.kelly@intel.com> + +description: | + The Keem Bay xlink IPC driver enables the communication/control sub-system + for internal IPC communications within the Intel Keem Bay SoC. + +properties: + compatible: + oneOf: + - items: + - const: intel,keembay-xlink-ipc + + memory-region: + items: + - description: reference to the CSS xlink IPC reserved memory region. + - description: reference to the MSS xlink IPC reserved memory region. + + intel,keembay-vpu-ipc-id: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: The numeric ID identifying the VPU within the xLink stack. + + intel,keembay-vpu-ipc-name: + $ref: "/schemas/types.yaml#/definitions/string" + description: User-friendly name for the VPU within the xLink stack. + + intel,keembay-vpu-ipc: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: reference to the corresponding intel,keembay-vpu-ipc node. + +examples: + - | + xlink-ipc { + compatible = "intel,keembay-xlink-ipc"; + memory-region = <&css_xlink_reserved>, + <&mss_xlink_reserved>; + intel,keembay-vpu-ipc-id = <0x0>; + intel,keembay-vpu-ipc-name = "vpu-slice-0"; + intel,keembay-vpu-ipc = <&vpuipc>; + }; -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2 17/34] xlink-ipc: Add xlink ipc device tree bindings 2021-01-08 21:25 ` [PATCH v2 17/34] xlink-ipc: Add xlink ipc device tree bindings mgross @ 2021-01-10 17:18 ` Rob Herring 0 siblings, 0 replies; 10+ messages in thread From: Rob Herring @ 2021-01-10 17:18 UTC (permalink / raw) To: mgross Cc: Seamus Kelly, robh+dt, gregkh, arnd, markgross, damien.lemoal, palmerdabbelt, corbet, paul.walmsley, shawnguo, peng.fan, jassisinghbrar, dragan.cvetic, Ryan Carnaghi, bp, leonard.crestez, devicetree, linux-kernel On Fri, 08 Jan 2021 13:25:43 -0800, mgross@linux.intel.com wrote: > From: Seamus Kelly <seamus.kelly@intel.com> > > Add device tree bindings for the xLink IPC driver which enables xLink to > control and communicate with the VPU IP present on the Intel Keem Bay > SoC. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: devicetree@vger.kernel.org > Reviewed-by: Mark Gross <mgross@linux.intel.com> > Signed-off-by: Seamus Kelly <seamus.kelly@intel.com> > Signed-off-by: Ryan Carnaghi <ryan.r.carnaghi@intel.com> > --- > .../misc/intel,keembay-xlink-ipc.yaml | 49 +++++++++++++++++++ > 1 file changed, 49 insertions(+) > create mode 100644 Documentation/devicetree/bindings/misc/intel,keembay-xlink-ipc.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/misc/intel,keembay-xlink-ipc.yaml:21:9: [warning] wrong indentation: expected 10 but found 8 (indentation) dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/misc/intel,keembay-xlink-ipc.yaml: 'additionalProperties' is a required property /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/misc/intel,keembay-xlink-ipc.yaml: ignoring, error in schema: warning: no schema found in file: ./Documentation/devicetree/bindings/misc/intel,keembay-xlink-ipc.yaml See https://patchwork.ozlabs.org/patch/1423958 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit. ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 19/34] xlink-core: Add xlink core device tree bindings [not found] <20210108212600.36850-1-mgross@linux.intel.com> ` (2 preceding siblings ...) 2021-01-08 21:25 ` [PATCH v2 17/34] xlink-ipc: Add xlink ipc device tree bindings mgross @ 2021-01-08 21:25 ` mgross 2021-01-10 17:18 ` Rob Herring 2021-01-11 19:27 ` Rob Herring 3 siblings, 2 replies; 10+ messages in thread From: mgross @ 2021-01-08 21:25 UTC (permalink / raw) To: markgross, mgross, arnd, bp, damien.lemoal, dragan.cvetic, gregkh, corbet, leonard.crestez, palmerdabbelt, paul.walmsley, peng.fan, robh+dt, shawnguo, jassisinghbrar Cc: linux-kernel, Seamus Kelly, devicetree, Ryan Carnaghi From: Seamus Kelly <seamus.kelly@intel.com> Add device tree bindings for keembay-xlink. Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Reviewed-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Seamus Kelly <seamus.kelly@intel.com> Signed-off-by: Ryan Carnaghi <ryan.r.carnaghi@intel.com> --- .../bindings/misc/intel,keembay-xlink.yaml | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml diff --git a/Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml b/Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml new file mode 100644 index 000000000000..89c34018fa04 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) Intel Corporation. All rights reserved. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/misc/intel,keembay-xlink.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel Keem Bay xlink + +maintainers: + - Seamus Kelly <seamus.kelly@intel.com> + +description: | + The Keem Bay xlink driver enables the communication/control sub-system + for internal and external communications to the Intel Keem Bay SoC. + +properties: + compatible: + oneOf: + - items: + - const: intel,keembay-xlink + +examples: + - | + xlink { + compatible = "intel,keembay-xlink"; + }; -- 2.17.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2 19/34] xlink-core: Add xlink core device tree bindings 2021-01-08 21:25 ` [PATCH v2 19/34] xlink-core: Add xlink core " mgross @ 2021-01-10 17:18 ` Rob Herring 2021-01-11 19:27 ` Rob Herring 1 sibling, 0 replies; 10+ messages in thread From: Rob Herring @ 2021-01-10 17:18 UTC (permalink / raw) To: mgross Cc: paul.walmsley, devicetree, linux-kernel, Seamus Kelly, markgross, damien.lemoal, palmerdabbelt, corbet, peng.fan, arnd, dragan.cvetic, leonard.crestez, bp, shawnguo, jassisinghbrar, gregkh, robh+dt, Ryan Carnaghi On Fri, 08 Jan 2021 13:25:45 -0800, mgross@linux.intel.com wrote: > From: Seamus Kelly <seamus.kelly@intel.com> > > Add device tree bindings for keembay-xlink. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: devicetree@vger.kernel.org > Reviewed-by: Mark Gross <mgross@linux.intel.com> > Signed-off-by: Seamus Kelly <seamus.kelly@intel.com> > Signed-off-by: Ryan Carnaghi <ryan.r.carnaghi@intel.com> > --- > .../bindings/misc/intel,keembay-xlink.yaml | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml:21:9: [warning] wrong indentation: expected 10 but found 8 (indentation) dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml: 'additionalProperties' is a required property /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml: ignoring, error in schema: warning: no schema found in file: ./Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml See https://patchwork.ozlabs.org/patch/1423961 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 19/34] xlink-core: Add xlink core device tree bindings 2021-01-08 21:25 ` [PATCH v2 19/34] xlink-core: Add xlink core " mgross 2021-01-10 17:18 ` Rob Herring @ 2021-01-11 19:27 ` Rob Herring 1 sibling, 0 replies; 10+ messages in thread From: Rob Herring @ 2021-01-11 19:27 UTC (permalink / raw) To: mgross Cc: markgross, arnd, bp, damien.lemoal, dragan.cvetic, gregkh, corbet, leonard.crestez, palmerdabbelt, paul.walmsley, peng.fan, shawnguo, jassisinghbrar, linux-kernel, Seamus Kelly, devicetree, Ryan Carnaghi On Fri, Jan 08, 2021 at 01:25:45PM -0800, mgross@linux.intel.com wrote: > From: Seamus Kelly <seamus.kelly@intel.com> > > Add device tree bindings for keembay-xlink. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: devicetree@vger.kernel.org > Reviewed-by: Mark Gross <mgross@linux.intel.com> > Signed-off-by: Seamus Kelly <seamus.kelly@intel.com> > Signed-off-by: Ryan Carnaghi <ryan.r.carnaghi@intel.com> > --- > .../bindings/misc/intel,keembay-xlink.yaml | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml > > diff --git a/Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml b/Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml > new file mode 100644 > index 000000000000..89c34018fa04 > --- /dev/null > +++ b/Documentation/devicetree/bindings/misc/intel,keembay-xlink.yaml > @@ -0,0 +1,27 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright (c) Intel Corporation. All rights reserved. > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/misc/intel,keembay-xlink.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Intel Keem Bay xlink > + > +maintainers: > + - Seamus Kelly <seamus.kelly@intel.com> > + > +description: | > + The Keem Bay xlink driver enables the communication/control sub-system > + for internal and external communications to the Intel Keem Bay SoC. > + > +properties: > + compatible: > + oneOf: > + - items: > + - const: intel,keembay-xlink > + > +examples: > + - | > + xlink { > + compatible = "intel,keembay-xlink"; > + }; A node with a compatible and nothing else is generally a sign of abusing DT to instantiate a driver. You don't need DT for that. Rob ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2021-01-19 22:49 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <20210108212600.36850-1-mgross@linux.intel.com> 2021-01-08 21:25 ` [PATCH v2 04/34] dt-bindings: Add bindings for Keem Bay IPC driver mgross 2021-01-08 21:25 ` [PATCH v2 06/34] dt-bindings: Add bindings for Keem Bay VPU " mgross 2021-01-10 17:18 ` Rob Herring 2021-01-11 19:24 ` Rob Herring 2021-01-19 14:32 ` Alessandrelli, Daniele 2021-01-08 21:25 ` [PATCH v2 17/34] xlink-ipc: Add xlink ipc device tree bindings mgross 2021-01-10 17:18 ` Rob Herring 2021-01-08 21:25 ` [PATCH v2 19/34] xlink-core: Add xlink core " mgross 2021-01-10 17:18 ` Rob Herring 2021-01-11 19:27 ` Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).