* [PATCH v2 02/22] media: camss: Fix vfe_isr comment typo
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 03/22] media: camss: Add CAMSS_845 camss version Robert Foss
` (19 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Comment refers to ISPIF, but this is incorrect. Only
the VFE interrupts are handled by this function.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v1
- Bjorn: Add r-b
drivers/media/platform/qcom/camss/camss-vfe-4-1.c | 2 +-
drivers/media/platform/qcom/camss/camss-vfe-4-7.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
index 174a36be6f5d..a1b56b89130d 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
@@ -922,7 +922,7 @@ static void vfe_violation_read(struct vfe_device *vfe)
}
/*
- * vfe_isr - ISPIF module interrupt handler
+ * vfe_isr - VFE module interrupt handler
* @irq: Interrupt line
* @dev: VFE device
*
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
index b5704a2f119b..84c33b8f9fe3 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
@@ -1055,7 +1055,7 @@ static void vfe_violation_read(struct vfe_device *vfe)
}
/*
- * vfe_isr - ISPIF module interrupt handler
+ * vfe_isr - VFE module interrupt handler
* @irq: Interrupt line
* @dev: VFE device
*
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 03/22] media: camss: Add CAMSS_845 camss version
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
2021-01-20 13:43 ` [PATCH v2 02/22] media: camss: Fix vfe_isr comment typo Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 04/22] media: camss: Make ISPIF subdevice optional Robert Foss
` (18 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Add enum representing the SDM845 SOC, which incorporates version
170 of the Titan architecture ISP.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
drivers/media/platform/qcom/camss/camss.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index 3a0484683cd6..46e986452824 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -66,6 +66,7 @@ enum camss_version {
CAMSS_8x16,
CAMSS_8x96,
CAMSS_660,
+ CAMSS_845,
};
struct camss {
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 04/22] media: camss: Make ISPIF subdevice optional
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
2021-01-20 13:43 ` [PATCH v2 02/22] media: camss: Fix vfe_isr comment typo Robert Foss
2021-01-20 13:43 ` [PATCH v2 03/22] media: camss: Add CAMSS_845 camss version Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 05/22] media: camss: Refactor VFE HW version support Robert Foss
` (17 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 19298 bytes --]
This driver supports multiple architecture versions of the Qualcomm ISP.
The CAMSS architecure which this driver is name after, and with the
introduction of this series, the Titan architecture.
The ISPIF is an IP-block that is only present in the CAMSS generation of
the architecture. In order to support the Titan generation, make the
ISPIF an optional subdevice.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
Changes since v1:
- Björn: Improved commit message
- Björn: Use local 'dev' ptr instead of 'camss->dev'
- Björn: Remove res/ispif NULL checks
- Björn: Remove ispif NULL checks before calling
msm_ispif_unregister_entities()
- Andrey: Fixed incorrect allocation size
.../media/platform/qcom/camss/camss-ispif.c | 114 ++++++++++--------
.../media/platform/qcom/camss/camss-ispif.h | 3 +-
drivers/media/platform/qcom/camss/camss.c | 111 +++++++++++------
drivers/media/platform/qcom/camss/camss.h | 2 +-
4 files changed, 142 insertions(+), 88 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c
index adeb92808998..c36570042082 100644
--- a/drivers/media/platform/qcom/camss/camss-ispif.c
+++ b/drivers/media/platform/qcom/camss/camss-ispif.c
@@ -161,6 +161,7 @@ static const u32 ispif_formats_8x96[] = {
static irqreturn_t ispif_isr_8x96(int irq, void *dev)
{
struct ispif_device *ispif = dev;
+ struct camss *camss = ispif->camss;
u32 value0, value1, value2, value3, value4, value5;
value0 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_0(0));
@@ -186,34 +187,34 @@ static irqreturn_t ispif_isr_8x96(int irq, void *dev)
complete(&ispif->reset_complete[1]);
if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE0 pix0 overflow\n");
if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_RDI0_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 rdi0 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE0 rdi0 overflow\n");
if (unlikely(value1 & ISPIF_VFE_m_IRQ_STATUS_1_PIX1_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 pix1 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE0 pix1 overflow\n");
if (unlikely(value1 & ISPIF_VFE_m_IRQ_STATUS_1_RDI1_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 rdi1 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE0 rdi1 overflow\n");
if (unlikely(value2 & ISPIF_VFE_m_IRQ_STATUS_2_RDI2_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 rdi2 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE0 rdi2 overflow\n");
if (unlikely(value3 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE1 pix0 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE1 pix0 overflow\n");
if (unlikely(value3 & ISPIF_VFE_m_IRQ_STATUS_0_RDI0_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE1 rdi0 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE1 rdi0 overflow\n");
if (unlikely(value4 & ISPIF_VFE_m_IRQ_STATUS_1_PIX1_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE1 pix1 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE1 pix1 overflow\n");
if (unlikely(value4 & ISPIF_VFE_m_IRQ_STATUS_1_RDI1_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE1 rdi1 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE1 rdi1 overflow\n");
if (unlikely(value5 & ISPIF_VFE_m_IRQ_STATUS_2_RDI2_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE1 rdi2 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE1 rdi2 overflow\n");
return IRQ_HANDLED;
}
@@ -228,6 +229,7 @@ static irqreturn_t ispif_isr_8x96(int irq, void *dev)
static irqreturn_t ispif_isr_8x16(int irq, void *dev)
{
struct ispif_device *ispif = dev;
+ struct camss *camss = ispif->camss;
u32 value0, value1, value2;
value0 = readl_relaxed(ispif->base + ISPIF_VFE_m_IRQ_STATUS_0(0));
@@ -244,30 +246,32 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
complete(&ispif->reset_complete[0]);
if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE0 pix0 overflow\n");
if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_RDI0_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 rdi0 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE0 rdi0 overflow\n");
if (unlikely(value1 & ISPIF_VFE_m_IRQ_STATUS_1_PIX1_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 pix1 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE0 pix1 overflow\n");
if (unlikely(value1 & ISPIF_VFE_m_IRQ_STATUS_1_RDI1_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 rdi1 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE0 rdi1 overflow\n");
if (unlikely(value2 & ISPIF_VFE_m_IRQ_STATUS_2_RDI2_OVERFLOW))
- dev_err_ratelimited(to_device(ispif), "VFE0 rdi2 overflow\n");
+ dev_err_ratelimited(camss->dev, "VFE0 rdi2 overflow\n");
return IRQ_HANDLED;
}
static int ispif_vfe_reset(struct ispif_device *ispif, u8 vfe_id)
{
+ struct camss *camss = ispif->camss;
+
unsigned long time;
u32 val;
- if (vfe_id > (to_camss(ispif)->vfe_num - 1)) {
- dev_err(to_device(ispif),
+ if (vfe_id > (camss->vfe_num - 1)) {
+ dev_err(camss->dev,
"Error: asked reset for invalid VFE%d\n", vfe_id);
return -ENOENT;
}
@@ -300,7 +304,7 @@ static int ispif_vfe_reset(struct ispif_device *ispif, u8 vfe_id)
time = wait_for_completion_timeout(&ispif->reset_complete[vfe_id],
msecs_to_jiffies(ISPIF_RESET_TIMEOUT_MS));
if (!time) {
- dev_err(to_device(ispif),
+ dev_err(camss->dev,
"ISPIF for VFE%d reset timeout\n", vfe_id);
return -EIO;
}
@@ -316,30 +320,31 @@ static int ispif_vfe_reset(struct ispif_device *ispif, u8 vfe_id)
*/
static int ispif_reset(struct ispif_device *ispif, u8 vfe_id)
{
+ struct camss *camss = ispif->camss;
int ret;
- ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
+ ret = camss_pm_domain_on(camss, PM_DOMAIN_VFE0);
if (ret < 0)
return ret;
- ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
+ ret = camss_pm_domain_on(camss, PM_DOMAIN_VFE1);
if (ret < 0)
return ret;
ret = camss_enable_clocks(ispif->nclocks_for_reset,
ispif->clock_for_reset,
- to_device(ispif));
+ camss->dev);
if (ret < 0)
return ret;
ret = ispif_vfe_reset(ispif, vfe_id);
if (ret)
- dev_dbg(to_device(ispif), "ISPIF Reset failed\n");
+ dev_dbg(camss->dev, "ISPIF Reset failed\n");
camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset);
- camss_pm_domain_off(to_camss(ispif), PM_DOMAIN_VFE0);
- camss_pm_domain_off(to_camss(ispif), PM_DOMAIN_VFE1);
+ camss_pm_domain_off(camss, PM_DOMAIN_VFE0);
+ camss_pm_domain_off(camss, PM_DOMAIN_VFE1);
return ret;
}
@@ -355,7 +360,7 @@ static int ispif_set_power(struct v4l2_subdev *sd, int on)
{
struct ispif_line *line = v4l2_get_subdevdata(sd);
struct ispif_device *ispif = line->ispif;
- struct device *dev = to_device(ispif);
+ struct device *dev = ispif->camss->dev;
int ret = 0;
mutex_lock(&ispif->power_lock);
@@ -505,7 +510,7 @@ static int ispif_validate_intf_status(struct ispif_device *ispif,
}
if ((val & 0xf) != 0xf) {
- dev_err(to_device(ispif), "%s: ispif is busy: 0x%x\n",
+ dev_err(ispif->camss->dev, "%s: ispif is busy: 0x%x\n",
__func__, val);
ret = -EBUSY;
}
@@ -552,7 +557,7 @@ static int ispif_wait_for_stop(struct ispif_device *ispif,
ISPIF_TIMEOUT_SLEEP_US,
ISPIF_TIMEOUT_ALL_US);
if (ret < 0)
- dev_err(to_device(ispif), "%s: ispif stop timeout\n",
+ dev_err(ispif->camss->dev, "%s: ispif stop timeout\n",
__func__);
return ret;
@@ -800,6 +805,7 @@ static int ispif_set_stream(struct v4l2_subdev *sd, int enable)
{
struct ispif_line *line = v4l2_get_subdevdata(sd);
struct ispif_device *ispif = line->ispif;
+ struct camss *camss = ispif->camss;
enum ispif_intf intf = line->interface;
u8 csid = line->csid_id;
u8 vfe = line->vfe_id;
@@ -825,8 +831,8 @@ static int ispif_set_stream(struct v4l2_subdev *sd, int enable)
ispif_select_csid(ispif, intf, csid, vfe, 1);
ispif_select_cid(ispif, intf, cid, vfe, 1);
ispif_config_irq(ispif, intf, vfe, 1);
- if (to_camss(ispif)->version == CAMSS_8x96 ||
- to_camss(ispif)->version == CAMSS_660)
+ if (camss->version == CAMSS_8x96 ||
+ camss->version == CAMSS_660)
ispif_config_pack(ispif,
line->fmt[MSM_ISPIF_PAD_SINK].code,
intf, cid, vfe, 1);
@@ -843,8 +849,8 @@ static int ispif_set_stream(struct v4l2_subdev *sd, int enable)
return ret;
mutex_lock(&ispif->config_lock);
- if (to_camss(ispif)->version == CAMSS_8x96 ||
- to_camss(ispif)->version == CAMSS_660)
+ if (camss->version == CAMSS_8x96 ||
+ camss->version == CAMSS_660)
ispif_config_pack(ispif,
line->fmt[MSM_ISPIF_PAD_SINK].code,
intf, cid, vfe, 0);
@@ -1088,26 +1094,29 @@ static int ispif_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
*
* Return 0 on success or a negative error code otherwise
*/
-int msm_ispif_subdev_init(struct ispif_device *ispif,
+int msm_ispif_subdev_init(struct camss *camss,
const struct resources_ispif *res)
{
- struct device *dev = to_device(ispif);
+ struct device *dev = camss->dev;
+ struct ispif_device *ispif = camss->ispif;
struct platform_device *pdev = to_platform_device(dev);
struct resource *r;
int i;
int ret;
+ ispif->camss = camss;
+
/* Number of ISPIF lines - same as number of CSID hardware modules */
- if (to_camss(ispif)->version == CAMSS_8x16)
+ if (camss->version == CAMSS_8x16)
ispif->line_num = 2;
- else if (to_camss(ispif)->version == CAMSS_8x96 ||
- to_camss(ispif)->version == CAMSS_660)
+ else if (camss->version == CAMSS_8x96 ||
+ camss->version == CAMSS_660)
ispif->line_num = 4;
else
return -EINVAL;
- ispif->line = devm_kcalloc(dev, ispif->line_num, sizeof(*ispif->line),
- GFP_KERNEL);
+ ispif->line = devm_kcalloc(dev, ispif->line_num,
+ sizeof(*ispif->line), GFP_KERNEL);
if (!ispif->line)
return -ENOMEM;
@@ -1115,12 +1124,12 @@ int msm_ispif_subdev_init(struct ispif_device *ispif,
ispif->line[i].ispif = ispif;
ispif->line[i].id = i;
- if (to_camss(ispif)->version == CAMSS_8x16) {
+ if (camss->version == CAMSS_8x16) {
ispif->line[i].formats = ispif_formats_8x16;
ispif->line[i].nformats =
ARRAY_SIZE(ispif_formats_8x16);
- } else if (to_camss(ispif)->version == CAMSS_8x96 ||
- to_camss(ispif)->version == CAMSS_660) {
+ } else if (camss->version == CAMSS_8x96 ||
+ camss->version == CAMSS_660) {
ispif->line[i].formats = ispif_formats_8x96;
ispif->line[i].nformats =
ARRAY_SIZE(ispif_formats_8x96);
@@ -1157,15 +1166,16 @@ int msm_ispif_subdev_init(struct ispif_device *ispif,
ispif->irq = r->start;
snprintf(ispif->irq_name, sizeof(ispif->irq_name), "%s_%s",
dev_name(dev), MSM_ISPIF_NAME);
- if (to_camss(ispif)->version == CAMSS_8x16)
+ if (camss->version == CAMSS_8x16)
ret = devm_request_irq(dev, ispif->irq, ispif_isr_8x16,
IRQF_TRIGGER_RISING, ispif->irq_name, ispif);
- else if (to_camss(ispif)->version == CAMSS_8x96 ||
- to_camss(ispif)->version == CAMSS_660)
+ else if (camss->version == CAMSS_8x96 ||
+ camss->version == CAMSS_660)
ret = devm_request_irq(dev, ispif->irq, ispif_isr_8x96,
IRQF_TRIGGER_RISING, ispif->irq_name, ispif);
else
ret = -EINVAL;
+
if (ret < 0) {
dev_err(dev, "request_irq failed: %d\n", ret);
return ret;
@@ -1331,10 +1341,13 @@ static const struct media_entity_operations ispif_media_ops = {
int msm_ispif_register_entities(struct ispif_device *ispif,
struct v4l2_device *v4l2_dev)
{
- struct device *dev = to_device(ispif);
+ struct camss *camss = ispif->camss;
int ret;
int i;
+ if (!ispif)
+ return 0;
+
for (i = 0; i < ispif->line_num; i++) {
struct v4l2_subdev *sd = &ispif->line[i].subdev;
struct media_pad *pads = ispif->line[i].pads;
@@ -1348,7 +1361,7 @@ int msm_ispif_register_entities(struct ispif_device *ispif,
ret = ispif_init_formats(sd, NULL);
if (ret < 0) {
- dev_err(dev, "Failed to init format: %d\n", ret);
+ dev_err(camss->dev, "Failed to init format: %d\n", ret);
goto error;
}
@@ -1360,13 +1373,15 @@ int msm_ispif_register_entities(struct ispif_device *ispif,
ret = media_entity_pads_init(&sd->entity, MSM_ISPIF_PADS_NUM,
pads);
if (ret < 0) {
- dev_err(dev, "Failed to init media entity: %d\n", ret);
+ dev_err(camss->dev, "Failed to init media entity: %d\n",
+ ret);
goto error;
}
ret = v4l2_device_register_subdev(v4l2_dev, sd);
if (ret < 0) {
- dev_err(dev, "Failed to register subdev: %d\n", ret);
+ dev_err(camss->dev, "Failed to register subdev: %d\n",
+ ret);
media_entity_cleanup(&sd->entity);
goto error;
}
@@ -1393,6 +1408,9 @@ void msm_ispif_unregister_entities(struct ispif_device *ispif)
{
int i;
+ if (!ispif)
+ return;
+
mutex_destroy(&ispif->power_lock);
mutex_destroy(&ispif->config_lock);
diff --git a/drivers/media/platform/qcom/camss/camss-ispif.h b/drivers/media/platform/qcom/camss/camss-ispif.h
index 4132174f7ea1..fdf28e68cc7d 100644
--- a/drivers/media/platform/qcom/camss/camss-ispif.h
+++ b/drivers/media/platform/qcom/camss/camss-ispif.h
@@ -63,11 +63,12 @@ struct ispif_device {
struct mutex config_lock;
unsigned int line_num;
struct ispif_line *line;
+ struct camss *camss;
};
struct resources_ispif;
-int msm_ispif_subdev_init(struct ispif_device *ispif,
+int msm_ispif_subdev_init(struct camss *camss,
const struct resources_ispif *res);
int msm_ispif_register_entities(struct ispif_device *ispif,
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 8fefce57bc49..b966de344b5b 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -748,11 +748,13 @@ static int camss_init_subdevices(struct camss *camss)
}
}
- ret = msm_ispif_subdev_init(&camss->ispif, ispif_res);
- if (ret < 0) {
- dev_err(camss->dev, "Failed to init ispif sub-device: %d\n",
+ if (camss->ispif) {
+ ret = msm_ispif_subdev_init(camss, ispif_res);
+ if (ret < 0) {
+ dev_err(camss->dev, "Failed to init ispif sub-device: %d\n",
ret);
- return ret;
+ return ret;
+ }
}
for (i = 0; i < camss->vfe_num; i++) {
@@ -801,11 +803,14 @@ static int camss_register_entities(struct camss *camss)
}
}
- ret = msm_ispif_register_entities(&camss->ispif, &camss->v4l2_dev);
- if (ret < 0) {
- dev_err(camss->dev, "Failed to register ispif entities: %d\n",
+ if (camss->ispif) {
+ ret = msm_ispif_register_entities(camss->ispif,
+ &camss->v4l2_dev);
+ if (ret < 0) {
+ dev_err(camss->dev, "Failed to register ispif entities: %d\n",
ret);
- goto err_reg_ispif;
+ goto err_reg_ispif;
+ }
}
for (i = 0; i < camss->vfe_num; i++) {
@@ -838,43 +843,64 @@ static int camss_register_entities(struct camss *camss)
}
}
- for (i = 0; i < camss->csid_num; i++) {
- for (j = 0; j < camss->ispif.line_num; j++) {
- ret = media_create_pad_link(
- &camss->csid[i].subdev.entity,
- MSM_CSID_PAD_SRC,
- &camss->ispif.line[j].subdev.entity,
- MSM_ISPIF_PAD_SINK,
- 0);
- if (ret < 0) {
- dev_err(camss->dev,
- "Failed to link %s->%s entities: %d\n",
- camss->csid[i].subdev.entity.name,
- camss->ispif.line[j].subdev.entity.name,
- ret);
- goto err_link;
- }
- }
- }
-
- for (i = 0; i < camss->ispif.line_num; i++)
- for (k = 0; k < camss->vfe_num; k++)
- for (j = 0; j < ARRAY_SIZE(camss->vfe[k].line); j++) {
+ if (camss->ispif) {
+ for (i = 0; i < camss->csid_num; i++) {
+ for (j = 0; j < camss->ispif->line_num; j++) {
ret = media_create_pad_link(
- &camss->ispif.line[i].subdev.entity,
- MSM_ISPIF_PAD_SRC,
- &camss->vfe[k].line[j].subdev.entity,
- MSM_VFE_PAD_SINK,
+ &camss->csid[i].subdev.entity,
+ MSM_CSID_PAD_SRC,
+ &camss->ispif->line[j].subdev.entity,
+ MSM_ISPIF_PAD_SINK,
0);
if (ret < 0) {
dev_err(camss->dev,
"Failed to link %s->%s entities: %d\n",
- camss->ispif.line[i].subdev.entity.name,
- camss->vfe[k].line[j].subdev.entity.name,
+ camss->csid[i].subdev.entity.name,
+ camss->ispif->line[j].subdev.entity.name,
ret);
goto err_link;
}
}
+ }
+
+ for (i = 0; i < camss->ispif->line_num; i++)
+ for (k = 0; k < camss->vfe_num; k++)
+ for (j = 0; j < ARRAY_SIZE(camss->vfe[k].line); j++) {
+ ret = media_create_pad_link(
+ &camss->ispif->line[i].subdev.entity,
+ MSM_ISPIF_PAD_SRC,
+ &camss->vfe[k].line[j].subdev.entity,
+ MSM_VFE_PAD_SINK,
+ 0);
+ if (ret < 0) {
+ dev_err(camss->dev,
+ "Failed to link %s->%s entities: %d\n",
+ camss->ispif->line[i].subdev.entity.name,
+ camss->vfe[k].line[j].subdev.entity.name,
+ ret);
+ goto err_link;
+ }
+ }
+ } else {
+ for (i = 0; i < camss->csid_num; i++)
+ for (k = 0; k < camss->vfe_num; k++)
+ for (j = 0; j < ARRAY_SIZE(camss->vfe[k].line); j++) {
+ ret = media_create_pad_link(
+ &camss->csid[i].subdev.entity,
+ MSM_CSID_PAD_SRC,
+ &camss->vfe[k].line[j].subdev.entity,
+ MSM_VFE_PAD_SINK,
+ 0);
+ if (ret < 0) {
+ dev_err(camss->dev,
+ "Failed to link %s->%s entities: %d\n",
+ camss->csid[i].subdev.entity.name,
+ camss->vfe[k].line[j].subdev.entity.name,
+ ret);
+ goto err_link;
+ }
+ }
+ }
return 0;
@@ -884,8 +910,8 @@ static int camss_register_entities(struct camss *camss)
for (i--; i >= 0; i--)
msm_vfe_unregister_entities(&camss->vfe[i]);
- msm_ispif_unregister_entities(&camss->ispif);
err_reg_ispif:
+ msm_ispif_unregister_entities(camss->ispif);
i = camss->csid_num;
err_reg_csid:
@@ -916,7 +942,7 @@ static void camss_unregister_entities(struct camss *camss)
for (i = 0; i < camss->csid_num; i++)
msm_csid_unregister_entity(&camss->csid[i]);
- msm_ispif_unregister_entities(&camss->ispif);
+ msm_ispif_unregister_entities(camss->ispif);
for (i = 0; i < camss->vfe_num; i++)
msm_vfe_unregister_entities(&camss->vfe[i]);
@@ -1047,6 +1073,15 @@ static int camss_probe(struct platform_device *pdev)
goto err_free;
}
+ if (camss->version == CAMSS_8x16 ||
+ camss->version == CAMSS_8x96) {
+ camss->ispif = devm_kcalloc(dev, 1, sizeof(*camss->ispif), GFP_KERNEL);
+ if (!camss->ispif) {
+ ret = -ENOMEM;
+ goto err_free;
+ }
+ }
+
camss->vfe = devm_kcalloc(dev, camss->vfe_num, sizeof(*camss->vfe),
GFP_KERNEL);
if (!camss->vfe) {
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index 46e986452824..b7ad8e9f68a8 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -79,7 +79,7 @@ struct camss {
struct csiphy_device *csiphy;
int csid_num;
struct csid_device *csid;
- struct ispif_device ispif;
+ struct ispif_device *ispif;
int vfe_num;
struct vfe_device *vfe;
atomic_t ref_count;
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 05/22] media: camss: Refactor VFE HW version support
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (2 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 04/22] media: camss: Make ISPIF subdevice optional Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 06/22] media: camss: Add support for VFE hardware version Titan 170 Robert Foss
` (16 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
In order to support Qualcomm ISP hardware architectures that diverge
from older architectures, the VFE subdevice driver needs to be refactored
to better abstract the different ISP architectures.
Gen1 represents the CAMSS ISP architecture. The ISP architecture developed
after CAMSS, Titan, will be referred to as Gen2.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
Changes since v1
- kernel test robot: Re-add chunk missing from
vfe_output_update_pong_addr
- Andrey: Fix file name error
- Andrey: Change hardware version number in comment
- Changed copyright year to 2021 for camss-vfe-4-8.c
drivers/media/platform/qcom/camss/Makefile | 2 +
.../media/platform/qcom/camss/camss-vfe-4-1.c | 117 +-
.../media/platform/qcom/camss/camss-vfe-4-7.c | 238 ++--
.../media/platform/qcom/camss/camss-vfe-4-8.c | 1166 +++++++++++++++++
.../platform/qcom/camss/camss-vfe-gen1.c | 763 +++++++++++
.../platform/qcom/camss/camss-vfe-gen1.h | 110 ++
drivers/media/platform/qcom/camss/camss-vfe.c | 770 +----------
drivers/media/platform/qcom/camss/camss-vfe.h | 113 +-
8 files changed, 2244 insertions(+), 1035 deletions(-)
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-4-8.c
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-gen1.c
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-gen1.h
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index 63c1b1b2943c..940c0ae3e003 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -10,6 +10,8 @@ qcom-camss-objs += \
camss-ispif.o \
camss-vfe-4-1.o \
camss-vfe-4-7.o \
+ camss-vfe-4-8.o \
+ camss-vfe-gen1.o \
camss-vfe.o \
camss-video.o \
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
index a1b56b89130d..269dc0860de9 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
@@ -12,7 +12,9 @@
#include <linux/io.h>
#include <linux/iopoll.h>
+#include "camss.h"
#include "camss-vfe.h"
+#include "camss-vfe-gen1.h"
#define VFE_0_HW_VERSION 0x000
@@ -283,30 +285,6 @@ static void vfe_wm_frame_based(struct vfe_device *vfe, u8 wm, u8 enable)
1 << VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_FRM_BASED_SHIFT);
}
-#define CALC_WORD(width, M, N) (((width) * (M) + (N) - 1) / (N))
-
-static int vfe_word_per_line(u32 format, u32 pixel_per_line)
-{
- int val = 0;
-
- switch (format) {
- case V4L2_PIX_FMT_NV12:
- case V4L2_PIX_FMT_NV21:
- case V4L2_PIX_FMT_NV16:
- case V4L2_PIX_FMT_NV61:
- val = CALC_WORD(pixel_per_line, 1, 8);
- break;
- case V4L2_PIX_FMT_YUYV:
- case V4L2_PIX_FMT_YVYU:
- case V4L2_PIX_FMT_UYVY:
- case V4L2_PIX_FMT_VYUY:
- val = CALC_WORD(pixel_per_line, 2, 8);
- break;
- }
-
- return val;
-}
-
static void vfe_get_wm_sizes(struct v4l2_pix_format_mplane *pix, u8 plane,
u16 *width, u16 *height, u16 *bytesperline)
{
@@ -665,20 +643,6 @@ static void vfe_set_demux_cfg(struct vfe_device *vfe, struct vfe_line *line)
writel_relaxed(odd_cfg, vfe->base + VFE_0_DEMUX_ODD_CFG);
}
-static inline u8 vfe_calc_interp_reso(u16 input, u16 output)
-{
- if (input / output >= 16)
- return 0;
-
- if (input / output >= 8)
- return 1;
-
- if (input / output >= 4)
- return 2;
-
- return 3;
-}
-
static void vfe_set_scale_cfg(struct vfe_device *vfe, struct vfe_line *line)
{
u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
@@ -974,46 +938,61 @@ static irqreturn_t vfe_isr(int irq, void *dev)
return IRQ_HANDLED;
}
-const struct vfe_hw_ops vfe_ops_4_1 = {
- .hw_version_read = vfe_hw_version_read,
+
+const struct vfe_hw_ops_gen1 vfe_ops_gen1_4_1 = {
+ .bus_connect_wm_to_rdi = vfe_bus_connect_wm_to_rdi,
+ .bus_disconnect_wm_from_rdi = vfe_bus_disconnect_wm_from_rdi,
+ .bus_enable_wr_if = vfe_bus_enable_wr_if,
+ .bus_reload_wm = vfe_bus_reload_wm,
+ .camif_wait_for_stop = vfe_camif_wait_for_stop,
+ .enable_irq_common = vfe_enable_irq_common,
+ .enable_irq_pix_line = vfe_enable_irq_pix_line,
+ .enable_irq_wm_line = vfe_enable_irq_wm_line,
.get_ub_size = vfe_get_ub_size,
- .global_reset = vfe_global_reset,
- .halt_request = vfe_halt_request,
.halt_clear = vfe_halt_clear,
+ .halt_request = vfe_halt_request,
+ .set_camif_cfg = vfe_set_camif_cfg,
+ .set_camif_cmd = vfe_set_camif_cmd,
+ .set_cgc_override = vfe_set_cgc_override,
+ .set_clamp_cfg = vfe_set_clamp_cfg,
+ .set_crop_cfg = vfe_set_crop_cfg,
+ .set_demux_cfg = vfe_set_demux_cfg,
+ .set_ds = vfe_set_ds,
+ .set_module_cfg = vfe_set_module_cfg,
+ .set_qos = vfe_set_qos,
+ .set_rdi_cid = vfe_set_rdi_cid,
+ .set_realign_cfg = vfe_set_realign_cfg,
+ .set_scale_cfg = vfe_set_scale_cfg,
+ .set_xbar_cfg = vfe_set_xbar_cfg,
.wm_enable = vfe_wm_enable,
.wm_frame_based = vfe_wm_frame_based,
+ .wm_get_ping_pong_status = vfe_wm_get_ping_pong_status,
.wm_line_based = vfe_wm_line_based,
- .wm_set_framedrop_period = vfe_wm_set_framedrop_period,
.wm_set_framedrop_pattern = vfe_wm_set_framedrop_pattern,
- .wm_set_ub_cfg = vfe_wm_set_ub_cfg,
- .bus_reload_wm = vfe_bus_reload_wm,
+ .wm_set_framedrop_period = vfe_wm_set_framedrop_period,
.wm_set_ping_addr = vfe_wm_set_ping_addr,
.wm_set_pong_addr = vfe_wm_set_pong_addr,
- .wm_get_ping_pong_status = vfe_wm_get_ping_pong_status,
- .bus_enable_wr_if = vfe_bus_enable_wr_if,
- .bus_connect_wm_to_rdi = vfe_bus_connect_wm_to_rdi,
.wm_set_subsample = vfe_wm_set_subsample,
- .bus_disconnect_wm_from_rdi = vfe_bus_disconnect_wm_from_rdi,
- .set_xbar_cfg = vfe_set_xbar_cfg,
- .set_realign_cfg = vfe_set_realign_cfg,
- .set_rdi_cid = vfe_set_rdi_cid,
- .reg_update = vfe_reg_update,
- .reg_update_clear = vfe_reg_update_clear,
- .enable_irq_wm_line = vfe_enable_irq_wm_line,
- .enable_irq_pix_line = vfe_enable_irq_pix_line,
- .enable_irq_common = vfe_enable_irq_common,
- .set_demux_cfg = vfe_set_demux_cfg,
- .set_scale_cfg = vfe_set_scale_cfg,
- .set_crop_cfg = vfe_set_crop_cfg,
- .set_clamp_cfg = vfe_set_clamp_cfg,
- .set_qos = vfe_set_qos,
- .set_ds = vfe_set_ds,
- .set_cgc_override = vfe_set_cgc_override,
- .set_camif_cfg = vfe_set_camif_cfg,
- .set_camif_cmd = vfe_set_camif_cmd,
- .set_module_cfg = vfe_set_module_cfg,
- .camif_wait_for_stop = vfe_camif_wait_for_stop,
+ .wm_set_ub_cfg = vfe_wm_set_ub_cfg,
+};
+
+static void vfe_subdev_init(struct vfe_device *vfe)
+{
+ vfe->isr_ops = vfe_isr_ops_gen1;
+ vfe->ops_gen1 = &vfe_ops_gen1_4_1;
+ vfe->video_ops = vfe_video_ops_gen1;
+}
+
+const struct vfe_hw_ops vfe_ops_4_1 = {
+ .global_reset = vfe_global_reset,
+ .hw_version_read = vfe_hw_version_read,
.isr_read = vfe_isr_read,
- .violation_read = vfe_violation_read,
.isr = vfe_isr,
+ .reg_update_clear = vfe_reg_update_clear,
+ .reg_update = vfe_reg_update,
+ .subdev_init = vfe_subdev_init,
+ .vfe_disable = vfe_gen1_disable,
+ .vfe_enable = vfe_gen1_enable,
+ .vfe_halt = vfe_gen1_halt,
+ .violation_read = vfe_violation_read,
};
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
index 84c33b8f9fe3..d0d470be1c10 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
@@ -12,7 +12,10 @@
#include <linux/io.h>
#include <linux/iopoll.h>
+#include "camss.h"
#include "camss-vfe.h"
+#include "camss-vfe-gen1.h"
+
#define VFE_0_HW_VERSION 0x000
@@ -257,7 +260,7 @@ static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
dev_err(dev, "VFE HW Version = 0x%08x\n", hw_version);
}
-static u16 vfe47_get_ub_size(u8 vfe_id)
+static u16 vfe_get_ub_size(u8 vfe_id)
{
if (vfe_id == 0)
return MSM_VFE_VFE0_UB_SIZE_RDI;
@@ -295,6 +298,8 @@ static void vfe_global_reset(struct vfe_device *vfe)
VFE_0_GLOBAL_RESET_CMD_CORE;
writel_relaxed(BIT(31), vfe->base + VFE_0_IRQ_MASK_0);
+
+ /* Enforce barrier between IRQ mask setup and global reset */
wmb();
writel_relaxed(reset_bits, vfe->base + VFE_0_GLOBAL_RESET_CMD);
}
@@ -310,7 +315,7 @@ static void vfe_halt_clear(struct vfe_device *vfe)
writel_relaxed(0x0, vfe->base + VFE_0_BUS_BDG_CMD);
}
-static void vfe47_wm_enable(struct vfe_device *vfe, u8 wm, u8 enable)
+static void vfe_wm_enable(struct vfe_device *vfe, u8 wm, u8 enable)
{
if (enable)
vfe_reg_set(vfe, VFE_0_BUS_IMAGE_MASTER_n_WR_CFG(wm),
@@ -459,8 +464,12 @@ static void vfe_wm_set_ub_cfg(struct vfe_device *vfe, u8 wm,
static void vfe_bus_reload_wm(struct vfe_device *vfe, u8 wm)
{
+ /* Enforce barrier between any outstanding register write */
wmb();
+
writel_relaxed(VFE_0_BUS_CMD_Mx_RLD_CMD(wm), vfe->base + VFE_0_BUS_CMD);
+
+ /* Use barrier to make sure bus reload is issued before anything else */
wmb();
}
@@ -674,8 +683,12 @@ static void vfe_set_rdi_cid(struct vfe_device *vfe, enum vfe_line_id id, u8 cid)
static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
{
vfe->reg_update |= VFE_0_REG_UPDATE_line_n(line_id);
+
+ /* Enforce barrier between line update and commit */
wmb();
writel_relaxed(vfe->reg_update, vfe->base + VFE_0_REG_UPDATE);
+
+ /* Make sure register update is issued before further reg writes */
wmb();
}
@@ -779,20 +792,6 @@ static void vfe_set_demux_cfg(struct vfe_device *vfe, struct vfe_line *line)
writel_relaxed(odd_cfg, vfe->base + VFE_0_DEMUX_ODD_CFG);
}
-static inline u8 vfe_calc_interp_reso(u16 input, u16 output)
-{
- if (input / output >= 16)
- return 0;
-
- if (input / output >= 8)
- return 1;
-
- if (input / output >= 4)
- return 2;
-
- return 3;
-}
-
static void vfe_set_scale_cfg(struct vfe_device *vfe, struct vfe_line *line)
{
u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
@@ -894,7 +893,7 @@ static void vfe_set_clamp_cfg(struct vfe_device *vfe)
writel_relaxed(val, vfe->base + VFE_0_CLAMP_ENC_MIN_CFG);
}
-static void vfe47_set_qos(struct vfe_device *vfe)
+static void vfe_set_qos(struct vfe_device *vfe)
{
u32 val = VFE_0_BUS_BDG_QOS_CFG_0_CFG;
u32 val7 = VFE_0_BUS_BDG_QOS_CFG_7_CFG;
@@ -909,7 +908,7 @@ static void vfe47_set_qos(struct vfe_device *vfe)
writel_relaxed(val7, vfe->base + VFE_0_BUS_BDG_QOS_CFG_7);
}
-static void vfe47_set_ds(struct vfe_device *vfe)
+static void vfe_set_ds(struct vfe_device *vfe)
{
u32 val = VFE_0_BUS_BDG_DS_CFG_0_CFG;
u32 val16 = VFE_0_BUS_BDG_DS_CFG_16_CFG;
@@ -993,6 +992,8 @@ static void vfe_set_camif_cmd(struct vfe_device *vfe, u8 enable)
cmd = VFE_0_CAMIF_CMD_CLEAR_CAMIF_STATUS | VFE_0_CAMIF_CMD_NO_CHANGE;
writel_relaxed(cmd, vfe->base + VFE_0_CAMIF_CMD);
+
+ /* Make sure camif command is issued written before it is changed again */
wmb();
if (enable)
@@ -1035,24 +1036,7 @@ static int vfe_camif_wait_for_stop(struct vfe_device *vfe, struct device *dev)
return ret;
}
-static void vfe_isr_read(struct vfe_device *vfe, u32 *value0, u32 *value1)
-{
- *value0 = readl_relaxed(vfe->base + VFE_0_IRQ_STATUS_0);
- *value1 = readl_relaxed(vfe->base + VFE_0_IRQ_STATUS_1);
- writel_relaxed(*value0, vfe->base + VFE_0_IRQ_CLEAR_0);
- writel_relaxed(*value1, vfe->base + VFE_0_IRQ_CLEAR_1);
-
- wmb();
- writel_relaxed(VFE_0_IRQ_CMD_GLOBAL_CLEAR, vfe->base + VFE_0_IRQ_CMD);
-}
-
-static void vfe_violation_read(struct vfe_device *vfe)
-{
- u32 violation = readl_relaxed(vfe->base + VFE_0_VIOLATION_STATUS);
-
- pr_err_ratelimited("VFE: violation = 0x%08x\n", violation);
-}
/*
* vfe_isr - VFE module interrupt handler
@@ -1107,150 +1091,80 @@ static irqreturn_t vfe_isr(int irq, void *dev)
return IRQ_HANDLED;
}
-const struct vfe_hw_ops vfe_ops_4_7 = {
- .hw_version_read = vfe_hw_version_read,
- .get_ub_size = vfe47_get_ub_size,
- .global_reset = vfe_global_reset,
- .halt_request = vfe_halt_request,
- .halt_clear = vfe_halt_clear,
- .wm_enable = vfe47_wm_enable,
- .wm_frame_based = vfe_wm_frame_based,
- .wm_line_based = vfe_wm_line_based,
- .wm_set_framedrop_period = vfe_wm_set_framedrop_period,
- .wm_set_framedrop_pattern = vfe_wm_set_framedrop_pattern,
- .wm_set_ub_cfg = vfe_wm_set_ub_cfg,
- .bus_reload_wm = vfe_bus_reload_wm,
- .wm_set_ping_addr = vfe_wm_set_ping_addr,
- .wm_set_pong_addr = vfe_wm_set_pong_addr,
- .wm_get_ping_pong_status = vfe_wm_get_ping_pong_status,
- .bus_enable_wr_if = vfe_bus_enable_wr_if,
- .bus_connect_wm_to_rdi = vfe_bus_connect_wm_to_rdi,
- .wm_set_subsample = vfe_wm_set_subsample,
- .bus_disconnect_wm_from_rdi = vfe_bus_disconnect_wm_from_rdi,
- .set_xbar_cfg = vfe_set_xbar_cfg,
- .set_realign_cfg = vfe_set_realign_cfg,
- .set_rdi_cid = vfe_set_rdi_cid,
- .reg_update = vfe_reg_update,
- .reg_update_clear = vfe_reg_update_clear,
- .enable_irq_wm_line = vfe_enable_irq_wm_line,
- .enable_irq_pix_line = vfe_enable_irq_pix_line,
- .enable_irq_common = vfe_enable_irq_common,
- .set_demux_cfg = vfe_set_demux_cfg,
- .set_scale_cfg = vfe_set_scale_cfg,
- .set_crop_cfg = vfe_set_crop_cfg,
- .set_clamp_cfg = vfe_set_clamp_cfg,
- .set_qos = vfe47_set_qos,
- .set_ds = vfe47_set_ds,
- .set_cgc_override = vfe_set_cgc_override,
- .set_camif_cfg = vfe_set_camif_cfg,
- .set_camif_cmd = vfe_set_camif_cmd,
- .set_module_cfg = vfe_set_module_cfg,
- .camif_wait_for_stop = vfe_camif_wait_for_stop,
- .isr_read = vfe_isr_read,
- .violation_read = vfe_violation_read,
- .isr = vfe_isr,
-};
-
-static u16 vfe48_get_ub_size(u8 vfe_id)
+static void vfe_isr_read(struct vfe_device *vfe, u32 *value0, u32 *value1)
{
- /* On VFE4.8 the ub-size is the same on both instances */
- return MSM_VFE_VFE0_UB_SIZE_RDI;
-}
+ *value0 = readl_relaxed(vfe->base + VFE_0_IRQ_STATUS_0);
+ *value1 = readl_relaxed(vfe->base + VFE_0_IRQ_STATUS_1);
-static void vfe48_wm_enable(struct vfe_device *vfe, u8 wm, u8 enable)
-{
- if (enable)
- writel_relaxed(2 << VFE48_0_BUS_IMAGE_MASTER_n_SHIFT(wm),
- vfe->base + VFE48_0_BUS_IMAGE_MASTER_CMD);
- else
- writel_relaxed(1 << VFE48_0_BUS_IMAGE_MASTER_n_SHIFT(wm),
- vfe->base + VFE48_0_BUS_IMAGE_MASTER_CMD);
+ writel_relaxed(*value0, vfe->base + VFE_0_IRQ_CLEAR_0);
+ writel_relaxed(*value1, vfe->base + VFE_0_IRQ_CLEAR_1);
- /* The WM must be enabled before sending other commands */
+ /* Enforce barrier between local & global IRQ clear */
wmb();
+ writel_relaxed(VFE_0_IRQ_CMD_GLOBAL_CLEAR, vfe->base + VFE_0_IRQ_CMD);
}
-static void vfe48_set_qos(struct vfe_device *vfe)
-{
- u32 val = VFE48_0_BUS_BDG_QOS_CFG_0_CFG;
- u32 val3 = VFE48_0_BUS_BDG_QOS_CFG_3_CFG;
- u32 val4 = VFE48_0_BUS_BDG_QOS_CFG_4_CFG;
- u32 val7 = VFE48_0_BUS_BDG_QOS_CFG_7_CFG;
-
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_0);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_1);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_2);
- writel_relaxed(val3, vfe->base + VFE_0_BUS_BDG_QOS_CFG_3);
- writel_relaxed(val4, vfe->base + VFE_0_BUS_BDG_QOS_CFG_4);
- writel_relaxed(val4, vfe->base + VFE_0_BUS_BDG_QOS_CFG_5);
- writel_relaxed(val4, vfe->base + VFE_0_BUS_BDG_QOS_CFG_6);
- writel_relaxed(val7, vfe->base + VFE_0_BUS_BDG_QOS_CFG_7);
-}
-
-static void vfe48_set_ds(struct vfe_device *vfe)
+static void vfe_violation_read(struct vfe_device *vfe)
{
- u32 val = VFE48_0_BUS_BDG_DS_CFG_0_CFG;
- u32 val16 = VFE48_0_BUS_BDG_DS_CFG_16_CFG;
+ u32 violation = readl_relaxed(vfe->base + VFE_0_VIOLATION_STATUS);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_0);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_1);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_2);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_3);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_4);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_5);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_6);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_7);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_8);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_9);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_10);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_11);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_12);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_13);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_14);
- writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_15);
- writel_relaxed(val16, vfe->base + VFE_0_BUS_BDG_DS_CFG_16);
+ pr_err_ratelimited("VFE: violation = 0x%08x\n", violation);
}
-const struct vfe_hw_ops vfe_ops_4_8 = {
- .hw_version_read = vfe_hw_version_read,
- .get_ub_size = vfe48_get_ub_size,
- .global_reset = vfe_global_reset,
- .halt_request = vfe_halt_request,
+const struct vfe_hw_ops_gen1 vfe_ops_gen1_4_7 = {
+ .bus_connect_wm_to_rdi = vfe_bus_connect_wm_to_rdi,
+ .bus_disconnect_wm_from_rdi = vfe_bus_disconnect_wm_from_rdi,
+ .bus_enable_wr_if = vfe_bus_enable_wr_if,
+ .bus_reload_wm = vfe_bus_reload_wm,
+ .camif_wait_for_stop = vfe_camif_wait_for_stop,
+ .enable_irq_common = vfe_enable_irq_common,
+ .enable_irq_pix_line = vfe_enable_irq_pix_line,
+ .enable_irq_wm_line = vfe_enable_irq_wm_line,
+ .get_ub_size = vfe_get_ub_size,
.halt_clear = vfe_halt_clear,
- .wm_enable = vfe48_wm_enable,
+ .halt_request = vfe_halt_request,
+ .set_camif_cfg = vfe_set_camif_cfg,
+ .set_camif_cmd = vfe_set_camif_cmd,
+ .set_cgc_override = vfe_set_cgc_override,
+ .set_clamp_cfg = vfe_set_clamp_cfg,
+ .set_crop_cfg = vfe_set_crop_cfg,
+ .set_demux_cfg = vfe_set_demux_cfg,
+ .set_ds = vfe_set_ds,
+ .set_module_cfg = vfe_set_module_cfg,
+ .set_qos = vfe_set_qos,
+ .set_rdi_cid = vfe_set_rdi_cid,
+ .set_realign_cfg = vfe_set_realign_cfg,
+ .set_scale_cfg = vfe_set_scale_cfg,
+ .set_xbar_cfg = vfe_set_xbar_cfg,
+ .wm_enable = vfe_wm_enable,
.wm_frame_based = vfe_wm_frame_based,
+ .wm_get_ping_pong_status = vfe_wm_get_ping_pong_status,
.wm_line_based = vfe_wm_line_based,
- .wm_set_framedrop_period = vfe_wm_set_framedrop_period,
.wm_set_framedrop_pattern = vfe_wm_set_framedrop_pattern,
- .wm_set_ub_cfg = vfe_wm_set_ub_cfg,
- .bus_reload_wm = vfe_bus_reload_wm,
+ .wm_set_framedrop_period = vfe_wm_set_framedrop_period,
.wm_set_ping_addr = vfe_wm_set_ping_addr,
.wm_set_pong_addr = vfe_wm_set_pong_addr,
- .wm_get_ping_pong_status = vfe_wm_get_ping_pong_status,
- .bus_enable_wr_if = vfe_bus_enable_wr_if,
- .bus_connect_wm_to_rdi = vfe_bus_connect_wm_to_rdi,
.wm_set_subsample = vfe_wm_set_subsample,
- .bus_disconnect_wm_from_rdi = vfe_bus_disconnect_wm_from_rdi,
- .set_xbar_cfg = vfe_set_xbar_cfg,
- .set_realign_cfg = vfe_set_realign_cfg,
- .set_rdi_cid = vfe_set_rdi_cid,
- .reg_update = vfe_reg_update,
- .reg_update_clear = vfe_reg_update_clear,
- .enable_irq_wm_line = vfe_enable_irq_wm_line,
- .enable_irq_pix_line = vfe_enable_irq_pix_line,
- .enable_irq_common = vfe_enable_irq_common,
- .set_demux_cfg = vfe_set_demux_cfg,
- .set_scale_cfg = vfe_set_scale_cfg,
- .set_crop_cfg = vfe_set_crop_cfg,
- .set_clamp_cfg = vfe_set_clamp_cfg,
- .set_qos = vfe48_set_qos,
- .set_ds = vfe48_set_ds,
- .set_cgc_override = vfe_set_cgc_override,
- .set_camif_cfg = vfe_set_camif_cfg,
- .set_camif_cmd = vfe_set_camif_cmd,
- .set_module_cfg = vfe_set_module_cfg,
- .camif_wait_for_stop = vfe_camif_wait_for_stop,
+ .wm_set_ub_cfg = vfe_wm_set_ub_cfg,
+};
+
+static void vfe_subdev_init(struct vfe_device *vfe)
+{
+ vfe->isr_ops = vfe_isr_ops_gen1;
+ vfe->ops_gen1 = &vfe_ops_gen1_4_7;
+ vfe->video_ops = vfe_video_ops_gen1;
+}
+
+const struct vfe_hw_ops vfe_ops_4_7 = {
+ .global_reset = vfe_global_reset,
+ .hw_version_read = vfe_hw_version_read,
.isr_read = vfe_isr_read,
- .violation_read = vfe_violation_read,
.isr = vfe_isr,
+ .reg_update_clear = vfe_reg_update_clear,
+ .reg_update = vfe_reg_update,
+ .subdev_init = vfe_subdev_init,
+ .vfe_disable = vfe_gen1_disable,
+ .vfe_enable = vfe_gen1_enable,
+ .vfe_halt = vfe_gen1_halt,
+ .violation_read = vfe_violation_read,
};
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-8.c b/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
new file mode 100644
index 000000000000..153e0e20664e
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-8.c
@@ -0,0 +1,1166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-vfe-4-8.c
+ *
+ * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v4.8
+ *
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2021 Linaro Ltd.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#include "camss.h"
+#include "camss-vfe.h"
+#include "camss-vfe-gen1.h"
+
+
+#define VFE_0_HW_VERSION 0x000
+
+#define VFE_0_GLOBAL_RESET_CMD 0x018
+#define VFE_0_GLOBAL_RESET_CMD_CORE BIT(0)
+#define VFE_0_GLOBAL_RESET_CMD_CAMIF BIT(1)
+#define VFE_0_GLOBAL_RESET_CMD_BUS BIT(2)
+#define VFE_0_GLOBAL_RESET_CMD_BUS_BDG BIT(3)
+#define VFE_0_GLOBAL_RESET_CMD_REGISTER BIT(4)
+#define VFE_0_GLOBAL_RESET_CMD_PM BIT(5)
+#define VFE_0_GLOBAL_RESET_CMD_BUS_MISR BIT(6)
+#define VFE_0_GLOBAL_RESET_CMD_TESTGEN BIT(7)
+#define VFE_0_GLOBAL_RESET_CMD_DSP BIT(8)
+#define VFE_0_GLOBAL_RESET_CMD_IDLE_CGC BIT(9)
+
+#define VFE_0_MODULE_LENS_EN 0x040
+#define VFE_0_MODULE_LENS_EN_DEMUX BIT(2)
+#define VFE_0_MODULE_LENS_EN_CHROMA_UPSAMPLE BIT(3)
+
+#define VFE_0_MODULE_ZOOM_EN 0x04c
+#define VFE_0_MODULE_ZOOM_EN_SCALE_ENC BIT(1)
+#define VFE_0_MODULE_ZOOM_EN_CROP_ENC BIT(2)
+#define VFE_0_MODULE_ZOOM_EN_REALIGN_BUF BIT(9)
+
+#define VFE_0_CORE_CFG 0x050
+#define VFE_0_CORE_CFG_PIXEL_PATTERN_YCBYCR 0x4
+#define VFE_0_CORE_CFG_PIXEL_PATTERN_YCRYCB 0x5
+#define VFE_0_CORE_CFG_PIXEL_PATTERN_CBYCRY 0x6
+#define VFE_0_CORE_CFG_PIXEL_PATTERN_CRYCBY 0x7
+#define VFE_0_CORE_CFG_COMPOSITE_REG_UPDATE_EN BIT(4)
+
+#define VFE_0_IRQ_CMD 0x058
+#define VFE_0_IRQ_CMD_GLOBAL_CLEAR BIT(0)
+
+#define VFE_0_IRQ_MASK_0 0x05c
+#define VFE_0_IRQ_MASK_0_CAMIF_SOF BIT(0)
+#define VFE_0_IRQ_MASK_0_CAMIF_EOF BIT(1)
+#define VFE_0_IRQ_MASK_0_RDIn_REG_UPDATE(n) BIT((n) + 5)
+#define VFE_0_IRQ_MASK_0_line_n_REG_UPDATE(n) \
+ ((n) == VFE_LINE_PIX ? BIT(4) : VFE_0_IRQ_MASK_0_RDIn_REG_UPDATE(n))
+#define VFE_0_IRQ_MASK_0_IMAGE_MASTER_n_PING_PONG(n) BIT((n) + 8)
+#define VFE_0_IRQ_MASK_0_IMAGE_COMPOSITE_DONE_n(n) BIT((n) + 25)
+#define VFE_0_IRQ_MASK_0_RESET_ACK BIT(31)
+#define VFE_0_IRQ_MASK_1 0x060
+#define VFE_0_IRQ_MASK_1_CAMIF_ERROR BIT(0)
+#define VFE_0_IRQ_MASK_1_VIOLATION BIT(7)
+#define VFE_0_IRQ_MASK_1_BUS_BDG_HALT_ACK BIT(8)
+#define VFE_0_IRQ_MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(n) BIT((n) + 9)
+#define VFE_0_IRQ_MASK_1_RDIn_SOF(n) BIT((n) + 29)
+
+#define VFE_0_IRQ_CLEAR_0 0x064
+#define VFE_0_IRQ_CLEAR_1 0x068
+
+#define VFE_0_IRQ_STATUS_0 0x06c
+#define VFE_0_IRQ_STATUS_0_CAMIF_SOF BIT(0)
+#define VFE_0_IRQ_STATUS_0_RDIn_REG_UPDATE(n) BIT((n) + 5)
+#define VFE_0_IRQ_STATUS_0_line_n_REG_UPDATE(n) \
+ ((n) == VFE_LINE_PIX ? BIT(4) : VFE_0_IRQ_STATUS_0_RDIn_REG_UPDATE(n))
+#define VFE_0_IRQ_STATUS_0_IMAGE_MASTER_n_PING_PONG(n) BIT((n) + 8)
+#define VFE_0_IRQ_STATUS_0_IMAGE_COMPOSITE_DONE_n(n) BIT((n) + 25)
+#define VFE_0_IRQ_STATUS_0_RESET_ACK BIT(31)
+#define VFE_0_IRQ_STATUS_1 0x070
+#define VFE_0_IRQ_STATUS_1_VIOLATION BIT(7)
+#define VFE_0_IRQ_STATUS_1_BUS_BDG_HALT_ACK BIT(8)
+#define VFE_0_IRQ_STATUS_1_RDIn_SOF(n) BIT((n) + 29)
+
+#define VFE_0_IRQ_COMPOSITE_MASK_0 0x074
+#define VFE_0_VIOLATION_STATUS 0x07c
+
+#define VFE_0_BUS_CMD 0x80
+#define VFE_0_BUS_CMD_Mx_RLD_CMD(x) BIT(x)
+
+#define VFE_0_BUS_CFG 0x084
+
+#define VFE_0_BUS_XBAR_CFG_x(x) (0x90 + 0x4 * ((x) / 2))
+#define VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_EN BIT(2)
+#define VFE_0_BUS_XBAR_CFG_x_M_REALIGN_BUF_EN BIT(3)
+#define VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTRA (0x1 << 4)
+#define VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER (0x2 << 4)
+#define VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER_INTRA (0x3 << 4)
+#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT 8
+#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_LUMA 0x0
+#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI0 0xc
+#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI1 0xd
+#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI2 0xe
+
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_CFG(n) (0x0a0 + 0x2c * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_CFG_WR_PATH_SHIFT 0
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_PING_ADDR(n) (0x0a4 + 0x2c * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_PONG_ADDR(n) (0x0ac + 0x2c * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG(n) (0x0b4 + 0x2c * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_BASED_SHIFT 1
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_SHIFT 2
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_MASK (0x1f << 2)
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_UB_CFG(n) (0x0b8 + 0x2c * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_UB_CFG_OFFSET_SHIFT 16
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_IMAGE_SIZE(n) (0x0bc + 0x2c * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_BUFFER_CFG(n) (0x0c0 + 0x2c * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_FRAMEDROP_PATTERN(n) \
+ (0x0c4 + 0x2c * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_IRQ_SUBSAMPLE_PATTERN(n) \
+ (0x0c8 + 0x2c * (n))
+#define VFE_0_BUS_IMAGE_MASTER_n_WR_IRQ_SUBSAMPLE_PATTERN_DEF 0xffffffff
+
+#define VFE_0_BUS_PING_PONG_STATUS 0x338
+
+#define VFE_0_BUS_BDG_CMD 0x400
+#define VFE_0_BUS_BDG_CMD_HALT_REQ 1
+
+#define VFE_0_BUS_BDG_QOS_CFG_0 0x404
+#define VFE_0_BUS_BDG_QOS_CFG_0_CFG 0xaaa5aaa5
+#define VFE_0_BUS_BDG_QOS_CFG_1 0x408
+#define VFE_0_BUS_BDG_QOS_CFG_2 0x40c
+#define VFE_0_BUS_BDG_QOS_CFG_3 0x410
+#define VFE_0_BUS_BDG_QOS_CFG_3_CFG 0xaa55aaa5
+#define VFE_0_BUS_BDG_QOS_CFG_4 0x414
+#define VFE_0_BUS_BDG_QOS_CFG_4_CFG 0xaa55aa55
+#define VFE_0_BUS_BDG_QOS_CFG_5 0x418
+#define VFE_0_BUS_BDG_QOS_CFG_6 0x41c
+#define VFE_0_BUS_BDG_QOS_CFG_7 0x420
+#define VFE_0_BUS_BDG_QOS_CFG_7_CFG 0x0005aa55
+
+#define VFE_0_BUS_BDG_DS_CFG_0 0x424
+#define VFE_0_BUS_BDG_DS_CFG_0_CFG 0xcccc1111
+#define VFE_0_BUS_BDG_DS_CFG_1 0x428
+#define VFE_0_BUS_BDG_DS_CFG_2 0x42c
+#define VFE_0_BUS_BDG_DS_CFG_3 0x430
+#define VFE_0_BUS_BDG_DS_CFG_4 0x434
+#define VFE_0_BUS_BDG_DS_CFG_5 0x438
+#define VFE_0_BUS_BDG_DS_CFG_6 0x43c
+#define VFE_0_BUS_BDG_DS_CFG_7 0x440
+#define VFE_0_BUS_BDG_DS_CFG_8 0x444
+#define VFE_0_BUS_BDG_DS_CFG_9 0x448
+#define VFE_0_BUS_BDG_DS_CFG_10 0x44c
+#define VFE_0_BUS_BDG_DS_CFG_11 0x450
+#define VFE_0_BUS_BDG_DS_CFG_12 0x454
+#define VFE_0_BUS_BDG_DS_CFG_13 0x458
+#define VFE_0_BUS_BDG_DS_CFG_14 0x45c
+#define VFE_0_BUS_BDG_DS_CFG_15 0x460
+#define VFE_0_BUS_BDG_DS_CFG_16 0x464
+#define VFE_0_BUS_BDG_DS_CFG_16_CFG 0x00000110
+
+#define VFE_0_RDI_CFG_x(x) (0x46c + (0x4 * (x)))
+#define VFE_0_RDI_CFG_x_RDI_STREAM_SEL_SHIFT 28
+#define VFE_0_RDI_CFG_x_RDI_STREAM_SEL_MASK (0xf << 28)
+#define VFE_0_RDI_CFG_x_RDI_M0_SEL_SHIFT 4
+#define VFE_0_RDI_CFG_x_RDI_M0_SEL_MASK (0xf << 4)
+#define VFE_0_RDI_CFG_x_RDI_EN_BIT BIT(2)
+#define VFE_0_RDI_CFG_x_MIPI_EN_BITS 0x3
+
+#define VFE_0_CAMIF_CMD 0x478
+#define VFE_0_CAMIF_CMD_DISABLE_FRAME_BOUNDARY 0
+#define VFE_0_CAMIF_CMD_ENABLE_FRAME_BOUNDARY 1
+#define VFE_0_CAMIF_CMD_NO_CHANGE 3
+#define VFE_0_CAMIF_CMD_CLEAR_CAMIF_STATUS BIT(2)
+#define VFE_0_CAMIF_CFG 0x47c
+#define VFE_0_CAMIF_CFG_VFE_OUTPUT_EN BIT(6)
+#define VFE_0_CAMIF_FRAME_CFG 0x484
+#define VFE_0_CAMIF_WINDOW_WIDTH_CFG 0x488
+#define VFE_0_CAMIF_WINDOW_HEIGHT_CFG 0x48c
+#define VFE_0_CAMIF_SUBSAMPLE_CFG 0x490
+#define VFE_0_CAMIF_IRQ_FRAMEDROP_PATTERN 0x498
+#define VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN 0x49c
+#define VFE_0_CAMIF_STATUS 0x4a4
+#define VFE_0_CAMIF_STATUS_HALT BIT(31)
+
+#define VFE_0_REG_UPDATE 0x4ac
+#define VFE_0_REG_UPDATE_RDIn(n) BIT(1 + (n))
+#define VFE_0_REG_UPDATE_line_n(n) \
+ ((n) == VFE_LINE_PIX ? 1 : VFE_0_REG_UPDATE_RDIn(n))
+
+#define VFE_0_DEMUX_CFG 0x560
+#define VFE_0_DEMUX_CFG_PERIOD 0x3
+#define VFE_0_DEMUX_GAIN_0 0x564
+#define VFE_0_DEMUX_GAIN_0_CH0_EVEN (0x80 << 0)
+#define VFE_0_DEMUX_GAIN_0_CH0_ODD (0x80 << 16)
+#define VFE_0_DEMUX_GAIN_1 0x568
+#define VFE_0_DEMUX_GAIN_1_CH1 (0x80 << 0)
+#define VFE_0_DEMUX_GAIN_1_CH2 (0x80 << 16)
+#define VFE_0_DEMUX_EVEN_CFG 0x574
+#define VFE_0_DEMUX_EVEN_CFG_PATTERN_YUYV 0x9cac
+#define VFE_0_DEMUX_EVEN_CFG_PATTERN_YVYU 0xac9c
+#define VFE_0_DEMUX_EVEN_CFG_PATTERN_UYVY 0xc9ca
+#define VFE_0_DEMUX_EVEN_CFG_PATTERN_VYUY 0xcac9
+#define VFE_0_DEMUX_ODD_CFG 0x578
+#define VFE_0_DEMUX_ODD_CFG_PATTERN_YUYV 0x9cac
+#define VFE_0_DEMUX_ODD_CFG_PATTERN_YVYU 0xac9c
+#define VFE_0_DEMUX_ODD_CFG_PATTERN_UYVY 0xc9ca
+#define VFE_0_DEMUX_ODD_CFG_PATTERN_VYUY 0xcac9
+
+#define VFE_0_SCALE_ENC_Y_CFG 0x91c
+#define VFE_0_SCALE_ENC_Y_H_IMAGE_SIZE 0x920
+#define VFE_0_SCALE_ENC_Y_H_PHASE 0x924
+#define VFE_0_SCALE_ENC_Y_V_IMAGE_SIZE 0x934
+#define VFE_0_SCALE_ENC_Y_V_PHASE 0x938
+#define VFE_0_SCALE_ENC_CBCR_CFG 0x948
+#define VFE_0_SCALE_ENC_CBCR_H_IMAGE_SIZE 0x94c
+#define VFE_0_SCALE_ENC_CBCR_H_PHASE 0x950
+#define VFE_0_SCALE_ENC_CBCR_V_IMAGE_SIZE 0x960
+#define VFE_0_SCALE_ENC_CBCR_V_PHASE 0x964
+
+#define VFE_0_CROP_ENC_Y_WIDTH 0x974
+#define VFE_0_CROP_ENC_Y_HEIGHT 0x978
+#define VFE_0_CROP_ENC_CBCR_WIDTH 0x97c
+#define VFE_0_CROP_ENC_CBCR_HEIGHT 0x980
+
+#define VFE_0_CLAMP_ENC_MAX_CFG 0x984
+#define VFE_0_CLAMP_ENC_MAX_CFG_CH0 (0xff << 0)
+#define VFE_0_CLAMP_ENC_MAX_CFG_CH1 (0xff << 8)
+#define VFE_0_CLAMP_ENC_MAX_CFG_CH2 (0xff << 16)
+#define VFE_0_CLAMP_ENC_MIN_CFG 0x988
+#define VFE_0_CLAMP_ENC_MIN_CFG_CH0 (0x0 << 0)
+#define VFE_0_CLAMP_ENC_MIN_CFG_CH1 (0x0 << 8)
+#define VFE_0_CLAMP_ENC_MIN_CFG_CH2 (0x0 << 16)
+
+#define VFE_0_REALIGN_BUF_CFG 0xaac
+#define VFE_0_REALIGN_BUF_CFG_CB_ODD_PIXEL BIT(2)
+#define VFE_0_REALIGN_BUF_CFG_CR_ODD_PIXEL BIT(3)
+#define VFE_0_REALIGN_BUF_CFG_HSUB_ENABLE BIT(4)
+
+#define VFE_0_BUS_IMAGE_MASTER_CMD 0xcec
+#define VFE_0_BUS_IMAGE_MASTER_n_SHIFT(x) (2 * (x))
+
+#define CAMIF_TIMEOUT_SLEEP_US 1000
+#define CAMIF_TIMEOUT_ALL_US 1000000
+
+#define MSM_VFE_VFE0_UB_SIZE 2047
+#define MSM_VFE_VFE0_UB_SIZE_RDI (MSM_VFE_VFE0_UB_SIZE / 3)
+#define MSM_VFE_VFE1_UB_SIZE 1535
+#define MSM_VFE_VFE1_UB_SIZE_RDI (MSM_VFE_VFE1_UB_SIZE / 3)
+
+static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
+{
+ u32 hw_version = readl_relaxed(vfe->base + VFE_0_HW_VERSION);
+
+ dev_err(dev, "VFE HW Version = 0x%08x\n", hw_version);
+}
+
+static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
+{
+ u32 bits = readl_relaxed(vfe->base + reg);
+
+ writel_relaxed(bits & ~clr_bits, vfe->base + reg);
+}
+
+static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
+{
+ u32 bits = readl_relaxed(vfe->base + reg);
+
+ writel_relaxed(bits | set_bits, vfe->base + reg);
+}
+
+static void vfe_global_reset(struct vfe_device *vfe)
+{
+ u32 reset_bits = VFE_0_GLOBAL_RESET_CMD_IDLE_CGC |
+ VFE_0_GLOBAL_RESET_CMD_DSP |
+ VFE_0_GLOBAL_RESET_CMD_TESTGEN |
+ VFE_0_GLOBAL_RESET_CMD_BUS_MISR |
+ VFE_0_GLOBAL_RESET_CMD_PM |
+ VFE_0_GLOBAL_RESET_CMD_REGISTER |
+ VFE_0_GLOBAL_RESET_CMD_BUS_BDG |
+ VFE_0_GLOBAL_RESET_CMD_BUS |
+ VFE_0_GLOBAL_RESET_CMD_CAMIF |
+ VFE_0_GLOBAL_RESET_CMD_CORE;
+
+ writel_relaxed(BIT(31), vfe->base + VFE_0_IRQ_MASK_0);
+
+ /* Enforce barrier between IRQ mask setup and global reset */
+ wmb();
+ writel_relaxed(reset_bits, vfe->base + VFE_0_GLOBAL_RESET_CMD);
+}
+
+static void vfe_halt_request(struct vfe_device *vfe)
+{
+ writel_relaxed(VFE_0_BUS_BDG_CMD_HALT_REQ,
+ vfe->base + VFE_0_BUS_BDG_CMD);
+}
+
+static void vfe_halt_clear(struct vfe_device *vfe)
+{
+ writel_relaxed(0x0, vfe->base + VFE_0_BUS_BDG_CMD);
+}
+
+static void vfe_wm_frame_based(struct vfe_device *vfe, u8 wm, u8 enable)
+{
+ if (enable)
+ vfe_reg_set(vfe, VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG(wm),
+ 1 << VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_BASED_SHIFT);
+ else
+ vfe_reg_clr(vfe, VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG(wm),
+ 1 << VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_BASED_SHIFT);
+}
+
+#define CALC_WORD(width, M, N) (((width) * (M) + (N) - 1) / (N))
+
+static int vfe_word_per_line_by_pixel(u32 format, u32 pixel_per_line)
+{
+ int val = 0;
+
+ switch (format) {
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ val = CALC_WORD(pixel_per_line, 1, 8);
+ break;
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_YVYU:
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_VYUY:
+ val = CALC_WORD(pixel_per_line, 2, 8);
+ break;
+ }
+
+ return val;
+}
+
+static int vfe_word_per_line_by_bytes(u32 bytes_per_line)
+{
+ return CALC_WORD(bytes_per_line, 1, 8);
+}
+
+static void vfe_get_wm_sizes(struct v4l2_pix_format_mplane *pix, u8 plane,
+ u16 *width, u16 *height, u16 *bytesperline)
+{
+ switch (pix->pixelformat) {
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ *width = pix->width;
+ *height = pix->height;
+ *bytesperline = pix->plane_fmt[0].bytesperline;
+ if (plane == 1)
+ *height /= 2;
+ break;
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ *width = pix->width;
+ *height = pix->height;
+ *bytesperline = pix->plane_fmt[0].bytesperline;
+ break;
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_YVYU:
+ case V4L2_PIX_FMT_VYUY:
+ case V4L2_PIX_FMT_UYVY:
+ *width = pix->width;
+ *height = pix->height;
+ *bytesperline = pix->plane_fmt[plane].bytesperline;
+ break;
+
+ }
+}
+
+static void vfe_wm_line_based(struct vfe_device *vfe, u32 wm,
+ struct v4l2_pix_format_mplane *pix,
+ u8 plane, u32 enable)
+{
+ u32 reg;
+
+ if (enable) {
+ u16 width = 0, height = 0, bytesperline = 0, wpl;
+
+ vfe_get_wm_sizes(pix, plane, &width, &height, &bytesperline);
+
+ wpl = vfe_word_per_line_by_pixel(pix->pixelformat, width);
+
+ reg = height - 1;
+ reg |= ((wpl + 3) / 4 - 1) << 16;
+
+ writel_relaxed(reg, vfe->base +
+ VFE_0_BUS_IMAGE_MASTER_n_WR_IMAGE_SIZE(wm));
+
+ wpl = vfe_word_per_line_by_bytes(bytesperline);
+
+ reg = 0x3;
+ reg |= (height - 1) << 2;
+ reg |= ((wpl + 1) / 2) << 16;
+
+ writel_relaxed(reg, vfe->base +
+ VFE_0_BUS_IMAGE_MASTER_n_WR_BUFFER_CFG(wm));
+ } else {
+ writel_relaxed(0, vfe->base +
+ VFE_0_BUS_IMAGE_MASTER_n_WR_IMAGE_SIZE(wm));
+ writel_relaxed(0, vfe->base +
+ VFE_0_BUS_IMAGE_MASTER_n_WR_BUFFER_CFG(wm));
+ }
+}
+
+static void vfe_wm_set_framedrop_period(struct vfe_device *vfe, u8 wm, u8 per)
+{
+ u32 reg;
+
+ reg = readl_relaxed(vfe->base +
+ VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG(wm));
+
+ reg &= ~(VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_MASK);
+
+ reg |= (per << VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_SHIFT)
+ & VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG_FRM_DROP_PER_MASK;
+
+ writel_relaxed(reg,
+ vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_ADDR_CFG(wm));
+}
+
+static void vfe_wm_set_framedrop_pattern(struct vfe_device *vfe, u8 wm,
+ u32 pattern)
+{
+ writel_relaxed(pattern,
+ vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_FRAMEDROP_PATTERN(wm));
+}
+
+static void vfe_wm_set_ub_cfg(struct vfe_device *vfe, u8 wm,
+ u16 offset, u16 depth)
+{
+ u32 reg;
+
+ reg = (offset << VFE_0_BUS_IMAGE_MASTER_n_WR_UB_CFG_OFFSET_SHIFT) |
+ depth;
+ writel_relaxed(reg, vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_UB_CFG(wm));
+}
+
+static void vfe_bus_reload_wm(struct vfe_device *vfe, u8 wm)
+{
+ /* Enforce barrier between any outstanding register write */
+ wmb();
+
+ writel_relaxed(VFE_0_BUS_CMD_Mx_RLD_CMD(wm), vfe->base + VFE_0_BUS_CMD);
+
+ /* Use barrier to make sure bus reload is issued before anything else */
+ wmb();
+}
+
+static void vfe_wm_set_ping_addr(struct vfe_device *vfe, u8 wm, u32 addr)
+{
+ writel_relaxed(addr,
+ vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_PING_ADDR(wm));
+}
+
+static void vfe_wm_set_pong_addr(struct vfe_device *vfe, u8 wm, u32 addr)
+{
+ writel_relaxed(addr,
+ vfe->base + VFE_0_BUS_IMAGE_MASTER_n_WR_PONG_ADDR(wm));
+}
+
+static int vfe_wm_get_ping_pong_status(struct vfe_device *vfe, u8 wm)
+{
+ u32 reg;
+
+ reg = readl_relaxed(vfe->base + VFE_0_BUS_PING_PONG_STATUS);
+
+ return (reg >> wm) & 0x1;
+}
+
+static void vfe_bus_enable_wr_if(struct vfe_device *vfe, u8 enable)
+{
+ if (enable)
+ writel_relaxed(0x101, vfe->base + VFE_0_BUS_CFG);
+ else
+ writel_relaxed(0, vfe->base + VFE_0_BUS_CFG);
+}
+
+static void vfe_bus_connect_wm_to_rdi(struct vfe_device *vfe, u8 wm,
+ enum vfe_line_id id)
+{
+ u32 reg;
+
+ reg = VFE_0_RDI_CFG_x_MIPI_EN_BITS;
+ vfe_reg_set(vfe, VFE_0_RDI_CFG_x(0), reg);
+
+ reg = VFE_0_RDI_CFG_x_RDI_EN_BIT;
+ reg |= ((3 * id) << VFE_0_RDI_CFG_x_RDI_STREAM_SEL_SHIFT) &
+ VFE_0_RDI_CFG_x_RDI_STREAM_SEL_MASK;
+ vfe_reg_set(vfe, VFE_0_RDI_CFG_x(id), reg);
+
+ switch (id) {
+ case VFE_LINE_RDI0:
+ default:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI0 <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+ break;
+ case VFE_LINE_RDI1:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI1 <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+ break;
+ case VFE_LINE_RDI2:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI2 <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+ break;
+ }
+
+ if (wm % 2 == 1)
+ reg <<= 16;
+
+ vfe_reg_set(vfe, VFE_0_BUS_XBAR_CFG_x(wm), reg);
+}
+
+static void vfe_wm_set_subsample(struct vfe_device *vfe, u8 wm)
+{
+ writel_relaxed(VFE_0_BUS_IMAGE_MASTER_n_WR_IRQ_SUBSAMPLE_PATTERN_DEF,
+ vfe->base +
+ VFE_0_BUS_IMAGE_MASTER_n_WR_IRQ_SUBSAMPLE_PATTERN(wm));
+}
+
+static void vfe_bus_disconnect_wm_from_rdi(struct vfe_device *vfe, u8 wm,
+ enum vfe_line_id id)
+{
+ u32 reg;
+
+ reg = VFE_0_RDI_CFG_x_RDI_EN_BIT;
+ vfe_reg_clr(vfe, VFE_0_RDI_CFG_x(id), reg);
+
+ switch (id) {
+ case VFE_LINE_RDI0:
+ default:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI0 <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+ break;
+ case VFE_LINE_RDI1:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI1 <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+ break;
+ case VFE_LINE_RDI2:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_VAL_RDI2 <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+ break;
+ }
+
+ if (wm % 2 == 1)
+ reg <<= 16;
+
+ vfe_reg_clr(vfe, VFE_0_BUS_XBAR_CFG_x(wm), reg);
+}
+
+static void vfe_set_xbar_cfg(struct vfe_device *vfe, struct vfe_output *output,
+ u8 enable)
+{
+ struct vfe_line *line = container_of(output, struct vfe_line, output);
+ u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
+ u32 reg;
+
+ switch (p) {
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_LUMA <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+
+ if (output->wm_idx[0] % 2 == 1)
+ reg <<= 16;
+
+ if (enable)
+ vfe_reg_set(vfe,
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[0]),
+ reg);
+ else
+ vfe_reg_clr(vfe,
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[0]),
+ reg);
+
+ reg = VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_EN;
+ if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV16)
+ reg |= VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER_INTRA;
+
+ if (output->wm_idx[1] % 2 == 1)
+ reg <<= 16;
+
+ if (enable)
+ vfe_reg_set(vfe,
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[1]),
+ reg);
+ else
+ vfe_reg_clr(vfe,
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[1]),
+ reg);
+ break;
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_YVYU:
+ case V4L2_PIX_FMT_VYUY:
+ case V4L2_PIX_FMT_UYVY:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_REALIGN_BUF_EN;
+ reg |= VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_EN;
+
+ if (p == V4L2_PIX_FMT_YUYV || p == V4L2_PIX_FMT_YVYU)
+ reg |= VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER_INTRA;
+
+ if (output->wm_idx[0] % 2 == 1)
+ reg <<= 16;
+
+ if (enable)
+ vfe_reg_set(vfe,
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[0]),
+ reg);
+ else
+ vfe_reg_clr(vfe,
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[0]),
+ reg);
+ break;
+ default:
+ break;
+ }
+}
+
+static void vfe_set_realign_cfg(struct vfe_device *vfe, struct vfe_line *line,
+ u8 enable)
+{
+ u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
+ u32 val = VFE_0_MODULE_ZOOM_EN_REALIGN_BUF;
+
+ if (p != V4L2_PIX_FMT_YUYV && p != V4L2_PIX_FMT_YVYU &&
+ p != V4L2_PIX_FMT_VYUY && p != V4L2_PIX_FMT_UYVY)
+ return;
+
+ if (enable) {
+ vfe_reg_set(vfe, VFE_0_MODULE_ZOOM_EN, val);
+ } else {
+ vfe_reg_clr(vfe, VFE_0_MODULE_ZOOM_EN, val);
+ return;
+ }
+
+ val = VFE_0_REALIGN_BUF_CFG_HSUB_ENABLE;
+
+ if (p == V4L2_PIX_FMT_UYVY || p == V4L2_PIX_FMT_YUYV)
+ val |= VFE_0_REALIGN_BUF_CFG_CR_ODD_PIXEL;
+ else
+ val |= VFE_0_REALIGN_BUF_CFG_CB_ODD_PIXEL;
+
+ writel_relaxed(val, vfe->base + VFE_0_REALIGN_BUF_CFG);
+}
+
+static void vfe_set_rdi_cid(struct vfe_device *vfe, enum vfe_line_id id, u8 cid)
+{
+ vfe_reg_clr(vfe, VFE_0_RDI_CFG_x(id),
+ VFE_0_RDI_CFG_x_RDI_M0_SEL_MASK);
+
+ vfe_reg_set(vfe, VFE_0_RDI_CFG_x(id),
+ cid << VFE_0_RDI_CFG_x_RDI_M0_SEL_SHIFT);
+}
+
+static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ vfe->reg_update |= VFE_0_REG_UPDATE_line_n(line_id);
+
+ /* Enforce barrier between line update and commit */
+ wmb();
+
+ writel_relaxed(vfe->reg_update, vfe->base + VFE_0_REG_UPDATE);
+
+ /* Make sure register update is issued before further reg writes */
+ wmb();
+}
+
+static inline void vfe_reg_update_clear(struct vfe_device *vfe,
+ enum vfe_line_id line_id)
+{
+ vfe->reg_update &= ~VFE_0_REG_UPDATE_line_n(line_id);
+}
+
+static void vfe_enable_irq_wm_line(struct vfe_device *vfe, u8 wm,
+ enum vfe_line_id line_id, u8 enable)
+{
+ u32 irq_en0 = VFE_0_IRQ_MASK_0_IMAGE_MASTER_n_PING_PONG(wm) |
+ VFE_0_IRQ_MASK_0_line_n_REG_UPDATE(line_id);
+ u32 irq_en1 = VFE_0_IRQ_MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(wm) |
+ VFE_0_IRQ_MASK_1_RDIn_SOF(line_id);
+
+ if (enable) {
+ vfe_reg_set(vfe, VFE_0_IRQ_MASK_0, irq_en0);
+ vfe_reg_set(vfe, VFE_0_IRQ_MASK_1, irq_en1);
+ } else {
+ vfe_reg_clr(vfe, VFE_0_IRQ_MASK_0, irq_en0);
+ vfe_reg_clr(vfe, VFE_0_IRQ_MASK_1, irq_en1);
+ }
+}
+
+static void vfe_enable_irq_pix_line(struct vfe_device *vfe, u8 comp,
+ enum vfe_line_id line_id, u8 enable)
+{
+ struct vfe_output *output = &vfe->line[line_id].output;
+ unsigned int i;
+ u32 irq_en0;
+ u32 irq_en1;
+ u32 comp_mask = 0;
+
+ irq_en0 = VFE_0_IRQ_MASK_0_CAMIF_SOF;
+ irq_en0 |= VFE_0_IRQ_MASK_0_CAMIF_EOF;
+ irq_en0 |= VFE_0_IRQ_MASK_0_IMAGE_COMPOSITE_DONE_n(comp);
+ irq_en0 |= VFE_0_IRQ_MASK_0_line_n_REG_UPDATE(line_id);
+ irq_en1 = VFE_0_IRQ_MASK_1_CAMIF_ERROR;
+ for (i = 0; i < output->wm_num; i++) {
+ irq_en1 |= VFE_0_IRQ_MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(
+ output->wm_idx[i]);
+ comp_mask |= (1 << output->wm_idx[i]) << comp * 8;
+ }
+
+ if (enable) {
+ vfe_reg_set(vfe, VFE_0_IRQ_MASK_0, irq_en0);
+ vfe_reg_set(vfe, VFE_0_IRQ_MASK_1, irq_en1);
+ vfe_reg_set(vfe, VFE_0_IRQ_COMPOSITE_MASK_0, comp_mask);
+ } else {
+ vfe_reg_clr(vfe, VFE_0_IRQ_MASK_0, irq_en0);
+ vfe_reg_clr(vfe, VFE_0_IRQ_MASK_1, irq_en1);
+ vfe_reg_clr(vfe, VFE_0_IRQ_COMPOSITE_MASK_0, comp_mask);
+ }
+}
+
+static void vfe_enable_irq_common(struct vfe_device *vfe)
+{
+ u32 irq_en0 = VFE_0_IRQ_MASK_0_RESET_ACK;
+ u32 irq_en1 = VFE_0_IRQ_MASK_1_VIOLATION |
+ VFE_0_IRQ_MASK_1_BUS_BDG_HALT_ACK;
+
+ vfe_reg_set(vfe, VFE_0_IRQ_MASK_0, irq_en0);
+ vfe_reg_set(vfe, VFE_0_IRQ_MASK_1, irq_en1);
+}
+
+static void vfe_set_demux_cfg(struct vfe_device *vfe, struct vfe_line *line)
+{
+ u32 val, even_cfg, odd_cfg;
+
+ writel_relaxed(VFE_0_DEMUX_CFG_PERIOD, vfe->base + VFE_0_DEMUX_CFG);
+
+ val = VFE_0_DEMUX_GAIN_0_CH0_EVEN | VFE_0_DEMUX_GAIN_0_CH0_ODD;
+ writel_relaxed(val, vfe->base + VFE_0_DEMUX_GAIN_0);
+
+ val = VFE_0_DEMUX_GAIN_1_CH1 | VFE_0_DEMUX_GAIN_1_CH2;
+ writel_relaxed(val, vfe->base + VFE_0_DEMUX_GAIN_1);
+
+ switch (line->fmt[MSM_VFE_PAD_SINK].code) {
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ even_cfg = VFE_0_DEMUX_EVEN_CFG_PATTERN_YUYV;
+ odd_cfg = VFE_0_DEMUX_ODD_CFG_PATTERN_YUYV;
+ break;
+ case MEDIA_BUS_FMT_YVYU8_2X8:
+ even_cfg = VFE_0_DEMUX_EVEN_CFG_PATTERN_YVYU;
+ odd_cfg = VFE_0_DEMUX_ODD_CFG_PATTERN_YVYU;
+ break;
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ default:
+ even_cfg = VFE_0_DEMUX_EVEN_CFG_PATTERN_UYVY;
+ odd_cfg = VFE_0_DEMUX_ODD_CFG_PATTERN_UYVY;
+ break;
+ case MEDIA_BUS_FMT_VYUY8_2X8:
+ even_cfg = VFE_0_DEMUX_EVEN_CFG_PATTERN_VYUY;
+ odd_cfg = VFE_0_DEMUX_ODD_CFG_PATTERN_VYUY;
+ break;
+ }
+
+ writel_relaxed(even_cfg, vfe->base + VFE_0_DEMUX_EVEN_CFG);
+ writel_relaxed(odd_cfg, vfe->base + VFE_0_DEMUX_ODD_CFG);
+}
+
+static void vfe_set_scale_cfg(struct vfe_device *vfe, struct vfe_line *line)
+{
+ u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
+ u32 reg;
+ u16 input, output;
+ u8 interp_reso;
+ u32 phase_mult;
+
+ writel_relaxed(0x3, vfe->base + VFE_0_SCALE_ENC_Y_CFG);
+
+ input = line->fmt[MSM_VFE_PAD_SINK].width - 1;
+ output = line->compose.width - 1;
+ reg = (output << 16) | input;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_H_IMAGE_SIZE);
+
+ interp_reso = vfe_calc_interp_reso(input, output);
+ phase_mult = input * (1 << (14 + interp_reso)) / output;
+ reg = (interp_reso << 28) | phase_mult;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_H_PHASE);
+
+ input = line->fmt[MSM_VFE_PAD_SINK].height - 1;
+ output = line->compose.height - 1;
+ reg = (output << 16) | input;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_V_IMAGE_SIZE);
+
+ interp_reso = vfe_calc_interp_reso(input, output);
+ phase_mult = input * (1 << (14 + interp_reso)) / output;
+ reg = (interp_reso << 28) | phase_mult;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_Y_V_PHASE);
+
+ writel_relaxed(0x3, vfe->base + VFE_0_SCALE_ENC_CBCR_CFG);
+
+ input = line->fmt[MSM_VFE_PAD_SINK].width - 1;
+ output = line->compose.width / 2 - 1;
+ reg = (output << 16) | input;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_H_IMAGE_SIZE);
+
+ interp_reso = vfe_calc_interp_reso(input, output);
+ phase_mult = input * (1 << (14 + interp_reso)) / output;
+ reg = (interp_reso << 28) | phase_mult;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_H_PHASE);
+
+ input = line->fmt[MSM_VFE_PAD_SINK].height - 1;
+ output = line->compose.height - 1;
+ if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV21)
+ output = line->compose.height / 2 - 1;
+ reg = (output << 16) | input;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_V_IMAGE_SIZE);
+
+ interp_reso = vfe_calc_interp_reso(input, output);
+ phase_mult = input * (1 << (14 + interp_reso)) / output;
+ reg = (interp_reso << 28) | phase_mult;
+ writel_relaxed(reg, vfe->base + VFE_0_SCALE_ENC_CBCR_V_PHASE);
+}
+
+static void vfe_set_crop_cfg(struct vfe_device *vfe, struct vfe_line *line)
+{
+ u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
+ u32 reg;
+ u16 first, last;
+
+ first = line->crop.left;
+ last = line->crop.left + line->crop.width - 1;
+ reg = (first << 16) | last;
+ writel_relaxed(reg, vfe->base + VFE_0_CROP_ENC_Y_WIDTH);
+
+ first = line->crop.top;
+ last = line->crop.top + line->crop.height - 1;
+ reg = (first << 16) | last;
+ writel_relaxed(reg, vfe->base + VFE_0_CROP_ENC_Y_HEIGHT);
+
+ first = line->crop.left / 2;
+ last = line->crop.left / 2 + line->crop.width / 2 - 1;
+ reg = (first << 16) | last;
+ writel_relaxed(reg, vfe->base + VFE_0_CROP_ENC_CBCR_WIDTH);
+
+ first = line->crop.top;
+ last = line->crop.top + line->crop.height - 1;
+ if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV21) {
+ first = line->crop.top / 2;
+ last = line->crop.top / 2 + line->crop.height / 2 - 1;
+ }
+ reg = (first << 16) | last;
+ writel_relaxed(reg, vfe->base + VFE_0_CROP_ENC_CBCR_HEIGHT);
+}
+
+static void vfe_set_clamp_cfg(struct vfe_device *vfe)
+{
+ u32 val = VFE_0_CLAMP_ENC_MAX_CFG_CH0 |
+ VFE_0_CLAMP_ENC_MAX_CFG_CH1 |
+ VFE_0_CLAMP_ENC_MAX_CFG_CH2;
+
+ writel_relaxed(val, vfe->base + VFE_0_CLAMP_ENC_MAX_CFG);
+
+ val = VFE_0_CLAMP_ENC_MIN_CFG_CH0 |
+ VFE_0_CLAMP_ENC_MIN_CFG_CH1 |
+ VFE_0_CLAMP_ENC_MIN_CFG_CH2;
+
+ writel_relaxed(val, vfe->base + VFE_0_CLAMP_ENC_MIN_CFG);
+}
+
+static void vfe_set_cgc_override(struct vfe_device *vfe, u8 wm, u8 enable)
+{
+ /* empty */
+}
+
+static void vfe_set_camif_cfg(struct vfe_device *vfe, struct vfe_line *line)
+{
+ u32 val;
+
+ switch (line->fmt[MSM_VFE_PAD_SINK].code) {
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ val = VFE_0_CORE_CFG_PIXEL_PATTERN_YCBYCR;
+ break;
+ case MEDIA_BUS_FMT_YVYU8_2X8:
+ val = VFE_0_CORE_CFG_PIXEL_PATTERN_YCRYCB;
+ break;
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ default:
+ val = VFE_0_CORE_CFG_PIXEL_PATTERN_CBYCRY;
+ break;
+ case MEDIA_BUS_FMT_VYUY8_2X8:
+ val = VFE_0_CORE_CFG_PIXEL_PATTERN_CRYCBY;
+ break;
+ }
+
+ val |= VFE_0_CORE_CFG_COMPOSITE_REG_UPDATE_EN;
+ writel_relaxed(val, vfe->base + VFE_0_CORE_CFG);
+
+ val = line->fmt[MSM_VFE_PAD_SINK].width * 2 - 1;
+ val |= (line->fmt[MSM_VFE_PAD_SINK].height - 1) << 16;
+ writel_relaxed(val, vfe->base + VFE_0_CAMIF_FRAME_CFG);
+
+ val = line->fmt[MSM_VFE_PAD_SINK].width * 2 - 1;
+ writel_relaxed(val, vfe->base + VFE_0_CAMIF_WINDOW_WIDTH_CFG);
+
+ val = line->fmt[MSM_VFE_PAD_SINK].height - 1;
+ writel_relaxed(val, vfe->base + VFE_0_CAMIF_WINDOW_HEIGHT_CFG);
+
+ val = 0xffffffff;
+ writel_relaxed(val, vfe->base + VFE_0_CAMIF_SUBSAMPLE_CFG);
+
+ val = 0xffffffff;
+ writel_relaxed(val, vfe->base + VFE_0_CAMIF_IRQ_FRAMEDROP_PATTERN);
+
+ val = 0xffffffff;
+ writel_relaxed(val, vfe->base + VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN);
+
+ val = VFE_0_RDI_CFG_x_MIPI_EN_BITS;
+ vfe_reg_set(vfe, VFE_0_RDI_CFG_x(0), val);
+
+ val = VFE_0_CAMIF_CFG_VFE_OUTPUT_EN;
+ writel_relaxed(val, vfe->base + VFE_0_CAMIF_CFG);
+}
+
+static void vfe_set_camif_cmd(struct vfe_device *vfe, u8 enable)
+{
+ u32 cmd;
+
+ cmd = VFE_0_CAMIF_CMD_CLEAR_CAMIF_STATUS | VFE_0_CAMIF_CMD_NO_CHANGE;
+ writel_relaxed(cmd, vfe->base + VFE_0_CAMIF_CMD);
+
+ /* Make sure camif command is issued written before it is changed again */
+ wmb();
+
+ if (enable)
+ cmd = VFE_0_CAMIF_CMD_ENABLE_FRAME_BOUNDARY;
+ else
+ cmd = VFE_0_CAMIF_CMD_DISABLE_FRAME_BOUNDARY;
+
+ writel_relaxed(cmd, vfe->base + VFE_0_CAMIF_CMD);
+}
+
+static void vfe_set_module_cfg(struct vfe_device *vfe, u8 enable)
+{
+ u32 val_lens = VFE_0_MODULE_LENS_EN_DEMUX |
+ VFE_0_MODULE_LENS_EN_CHROMA_UPSAMPLE;
+ u32 val_zoom = VFE_0_MODULE_ZOOM_EN_SCALE_ENC |
+ VFE_0_MODULE_ZOOM_EN_CROP_ENC;
+
+ if (enable) {
+ vfe_reg_set(vfe, VFE_0_MODULE_LENS_EN, val_lens);
+ vfe_reg_set(vfe, VFE_0_MODULE_ZOOM_EN, val_zoom);
+ } else {
+ vfe_reg_clr(vfe, VFE_0_MODULE_LENS_EN, val_lens);
+ vfe_reg_clr(vfe, VFE_0_MODULE_ZOOM_EN, val_zoom);
+ }
+}
+
+static int vfe_camif_wait_for_stop(struct vfe_device *vfe, struct device *dev)
+{
+ u32 val;
+ int ret;
+
+ ret = readl_poll_timeout(vfe->base + VFE_0_CAMIF_STATUS,
+ val,
+ (val & VFE_0_CAMIF_STATUS_HALT),
+ CAMIF_TIMEOUT_SLEEP_US,
+ CAMIF_TIMEOUT_ALL_US);
+ if (ret < 0)
+ dev_err(dev, "%s: camif stop timeout\n", __func__);
+
+ return ret;
+}
+
+
+
+/*
+ * vfe_isr - VFE module interrupt handler
+ * @irq: Interrupt line
+ * @dev: VFE device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t vfe_isr(int irq, void *dev)
+{
+ struct vfe_device *vfe = dev;
+ u32 value0, value1;
+ int i, j;
+
+ vfe->ops->isr_read(vfe, &value0, &value1);
+
+ trace_printk("VFE: status0 = 0x%08x, status1 = 0x%08x\n",
+ value0, value1);
+
+ if (value0 & VFE_0_IRQ_STATUS_0_RESET_ACK)
+ vfe->isr_ops.reset_ack(vfe);
+
+ if (value1 & VFE_0_IRQ_STATUS_1_VIOLATION)
+ vfe->ops->violation_read(vfe);
+
+ if (value1 & VFE_0_IRQ_STATUS_1_BUS_BDG_HALT_ACK)
+ vfe->isr_ops.halt_ack(vfe);
+
+ for (i = VFE_LINE_RDI0; i <= VFE_LINE_PIX; i++)
+ if (value0 & VFE_0_IRQ_STATUS_0_line_n_REG_UPDATE(i))
+ vfe->isr_ops.reg_update(vfe, i);
+
+ if (value0 & VFE_0_IRQ_STATUS_0_CAMIF_SOF)
+ vfe->isr_ops.sof(vfe, VFE_LINE_PIX);
+
+ for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
+ if (value1 & VFE_0_IRQ_STATUS_1_RDIn_SOF(i))
+ vfe->isr_ops.sof(vfe, i);
+
+ for (i = 0; i < MSM_VFE_COMPOSITE_IRQ_NUM; i++)
+ if (value0 & VFE_0_IRQ_STATUS_0_IMAGE_COMPOSITE_DONE_n(i)) {
+ vfe->isr_ops.comp_done(vfe, i);
+ for (j = 0; j < ARRAY_SIZE(vfe->wm_output_map); j++)
+ if (vfe->wm_output_map[j] == VFE_LINE_PIX)
+ value0 &= ~VFE_0_IRQ_MASK_0_IMAGE_MASTER_n_PING_PONG(j);
+ }
+
+ for (i = 0; i < MSM_VFE_IMAGE_MASTERS_NUM; i++)
+ if (value0 & VFE_0_IRQ_STATUS_0_IMAGE_MASTER_n_PING_PONG(i))
+ vfe->isr_ops.wm_done(vfe, i);
+
+ return IRQ_HANDLED;
+}
+
+static u16 vfe_get_ub_size(u8 vfe_id)
+{
+ /* On VFE4.8 the ub-size is the same on both instances */
+ return MSM_VFE_VFE0_UB_SIZE_RDI;
+}
+
+static void vfe_wm_enable(struct vfe_device *vfe, u8 wm, u8 enable)
+{
+ if (enable)
+ writel_relaxed(2 << VFE_0_BUS_IMAGE_MASTER_n_SHIFT(wm),
+ vfe->base + VFE_0_BUS_IMAGE_MASTER_CMD);
+ else
+ writel_relaxed(1 << VFE_0_BUS_IMAGE_MASTER_n_SHIFT(wm),
+ vfe->base + VFE_0_BUS_IMAGE_MASTER_CMD);
+
+ /* The WM must be enabled before sending other commands */
+ wmb();
+}
+
+static void vfe_set_qos(struct vfe_device *vfe)
+{
+ u32 val = VFE_0_BUS_BDG_QOS_CFG_0_CFG;
+ u32 val3 = VFE_0_BUS_BDG_QOS_CFG_3_CFG;
+ u32 val4 = VFE_0_BUS_BDG_QOS_CFG_4_CFG;
+ u32 val7 = VFE_0_BUS_BDG_QOS_CFG_7_CFG;
+
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_0);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_1);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_QOS_CFG_2);
+ writel_relaxed(val3, vfe->base + VFE_0_BUS_BDG_QOS_CFG_3);
+ writel_relaxed(val4, vfe->base + VFE_0_BUS_BDG_QOS_CFG_4);
+ writel_relaxed(val4, vfe->base + VFE_0_BUS_BDG_QOS_CFG_5);
+ writel_relaxed(val4, vfe->base + VFE_0_BUS_BDG_QOS_CFG_6);
+ writel_relaxed(val7, vfe->base + VFE_0_BUS_BDG_QOS_CFG_7);
+}
+
+static void vfe_set_ds(struct vfe_device *vfe)
+{
+ u32 val = VFE_0_BUS_BDG_DS_CFG_0_CFG;
+ u32 val16 = VFE_0_BUS_BDG_DS_CFG_16_CFG;
+
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_0);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_1);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_2);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_3);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_4);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_5);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_6);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_7);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_8);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_9);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_10);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_11);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_12);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_13);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_14);
+ writel_relaxed(val, vfe->base + VFE_0_BUS_BDG_DS_CFG_15);
+ writel_relaxed(val16, vfe->base + VFE_0_BUS_BDG_DS_CFG_16);
+}
+
+static void vfe_isr_read(struct vfe_device *vfe, u32 *value0, u32 *value1)
+{
+ *value0 = readl_relaxed(vfe->base + VFE_0_IRQ_STATUS_0);
+ *value1 = readl_relaxed(vfe->base + VFE_0_IRQ_STATUS_1);
+
+ writel_relaxed(*value0, vfe->base + VFE_0_IRQ_CLEAR_0);
+ writel_relaxed(*value1, vfe->base + VFE_0_IRQ_CLEAR_1);
+
+ /* Enforce barrier between local & global IRQ clear */
+ wmb();
+ writel_relaxed(VFE_0_IRQ_CMD_GLOBAL_CLEAR, vfe->base + VFE_0_IRQ_CMD);
+}
+
+static void vfe_violation_read(struct vfe_device *vfe)
+{
+ u32 violation = readl_relaxed(vfe->base + VFE_0_VIOLATION_STATUS);
+
+ pr_err_ratelimited("VFE: violation = 0x%08x\n", violation);
+}
+
+const struct vfe_hw_ops_gen1 vfe_ops_gen1_4_8 = {
+ .bus_connect_wm_to_rdi = vfe_bus_connect_wm_to_rdi,
+ .bus_disconnect_wm_from_rdi = vfe_bus_disconnect_wm_from_rdi,
+ .bus_enable_wr_if = vfe_bus_enable_wr_if,
+ .bus_reload_wm = vfe_bus_reload_wm,
+ .camif_wait_for_stop = vfe_camif_wait_for_stop,
+ .enable_irq_common = vfe_enable_irq_common,
+ .enable_irq_pix_line = vfe_enable_irq_pix_line,
+ .enable_irq_wm_line = vfe_enable_irq_wm_line,
+ .get_ub_size = vfe_get_ub_size,
+ .halt_clear = vfe_halt_clear,
+ .halt_request = vfe_halt_request,
+ .set_camif_cfg = vfe_set_camif_cfg,
+ .set_camif_cmd = vfe_set_camif_cmd,
+ .set_cgc_override = vfe_set_cgc_override,
+ .set_clamp_cfg = vfe_set_clamp_cfg,
+ .set_crop_cfg = vfe_set_crop_cfg,
+ .set_demux_cfg = vfe_set_demux_cfg,
+ .set_ds = vfe_set_ds,
+ .set_module_cfg = vfe_set_module_cfg,
+ .set_qos = vfe_set_qos,
+ .set_rdi_cid = vfe_set_rdi_cid,
+ .set_realign_cfg = vfe_set_realign_cfg,
+ .set_scale_cfg = vfe_set_scale_cfg,
+ .set_xbar_cfg = vfe_set_xbar_cfg,
+ .wm_enable = vfe_wm_enable,
+ .wm_frame_based = vfe_wm_frame_based,
+ .wm_get_ping_pong_status = vfe_wm_get_ping_pong_status,
+ .wm_line_based = vfe_wm_line_based,
+ .wm_set_framedrop_pattern = vfe_wm_set_framedrop_pattern,
+ .wm_set_framedrop_period = vfe_wm_set_framedrop_period,
+ .wm_set_ping_addr = vfe_wm_set_ping_addr,
+ .wm_set_pong_addr = vfe_wm_set_pong_addr,
+ .wm_set_subsample = vfe_wm_set_subsample,
+ .wm_set_ub_cfg = vfe_wm_set_ub_cfg,
+};
+
+static void vfe_subdev_init(struct vfe_device *vfe)
+{
+ vfe->isr_ops = vfe_isr_ops_gen1;
+ vfe->ops_gen1 = &vfe_ops_gen1_4_8;
+ vfe->video_ops = vfe_video_ops_gen1;
+}
+
+const struct vfe_hw_ops vfe_ops_4_8 = {
+ .global_reset = vfe_global_reset,
+ .hw_version_read = vfe_hw_version_read,
+ .isr_read = vfe_isr_read,
+ .isr = vfe_isr,
+ .reg_update_clear = vfe_reg_update_clear,
+ .reg_update = vfe_reg_update,
+ .subdev_init = vfe_subdev_init,
+ .vfe_disable = vfe_gen1_disable,
+ .vfe_enable = vfe_gen1_enable,
+ .vfe_halt = vfe_gen1_halt,
+ .violation_read = vfe_violation_read,
+};
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-gen1.c b/drivers/media/platform/qcom/camss/camss-vfe-gen1.c
new file mode 100644
index 000000000000..b98f30f99e89
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-vfe-gen1.c
@@ -0,0 +1,763 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-vfe-gen1.c
+ *
+ * Qualcomm MSM Camera Subsystem - VFE Common functionality for Gen 1 versions of hw (4.1, 4.7..)
+ *
+ * Copyright (C) 2020 Linaro Ltd.
+ */
+
+
+#include "camss.h"
+#include "camss-vfe.h"
+#include "camss-vfe-gen1.h"
+
+/* Max number of frame drop updates per frame */
+#define VFE_FRAME_DROP_UPDATES 2
+#define VFE_NEXT_SOF_MS 500
+
+
+int vfe_gen1_halt(struct vfe_device *vfe)
+{
+ unsigned long time;
+
+ return 0;
+
+ reinit_completion(&vfe->halt_complete);
+
+ vfe->ops_gen1->halt_request(vfe);
+
+ time = wait_for_completion_timeout(&vfe->halt_complete,
+ msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));
+ if (!time) {
+ dev_err(vfe->camss->dev, "VFE halt timeout\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int vfe_disable_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output = &line->output;
+ const struct vfe_hw_ops *ops = vfe->ops;
+ unsigned long flags;
+ unsigned long time;
+ unsigned int i;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ output->gen1.wait_sof = 1;
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ time = wait_for_completion_timeout(&output->sof, msecs_to_jiffies(VFE_NEXT_SOF_MS));
+ if (!time)
+ dev_err(vfe->camss->dev, "VFE sof timeout\n");
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ for (i = 0; i < output->wm_num; i++)
+ vfe->ops_gen1->wm_enable(vfe, output->wm_idx[i], 0);
+
+ ops->reg_update(vfe, line->id);
+ output->wait_reg_update = 1;
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ time = wait_for_completion_timeout(&output->reg_update, msecs_to_jiffies(VFE_NEXT_SOF_MS));
+ if (!time)
+ dev_err(vfe->camss->dev, "VFE reg update timeout\n");
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ if (line->id != VFE_LINE_PIX) {
+ vfe->ops_gen1->wm_frame_based(vfe, output->wm_idx[0], 0);
+ vfe->ops_gen1->bus_disconnect_wm_from_rdi(vfe, output->wm_idx[0], line->id);
+ vfe->ops_gen1->enable_irq_wm_line(vfe, output->wm_idx[0], line->id, 0);
+ vfe->ops_gen1->set_cgc_override(vfe, output->wm_idx[0], 0);
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+ } else {
+ for (i = 0; i < output->wm_num; i++) {
+ vfe->ops_gen1->wm_line_based(vfe, output->wm_idx[i], NULL, i, 0);
+ vfe->ops_gen1->set_cgc_override(vfe, output->wm_idx[i], 0);
+ }
+
+ vfe->ops_gen1->enable_irq_pix_line(vfe, 0, line->id, 0);
+ vfe->ops_gen1->set_module_cfg(vfe, 0);
+ vfe->ops_gen1->set_realign_cfg(vfe, line, 0);
+ vfe->ops_gen1->set_xbar_cfg(vfe, output, 0);
+ vfe->ops_gen1->set_camif_cmd(vfe, 0);
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ vfe->ops_gen1->camif_wait_for_stop(vfe, vfe->camss->dev);
+ }
+
+ return 0;
+}
+
+/*
+ * vfe_gen1_disable - Disable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_gen1_disable(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+
+ vfe_disable_output(line);
+
+ vfe_put_output(line);
+
+ mutex_lock(&vfe->stream_lock);
+
+ if (vfe->stream_count == 1)
+ vfe->ops_gen1->bus_enable_wr_if(vfe, 0);
+
+ vfe->stream_count--;
+
+ mutex_unlock(&vfe->stream_lock);
+
+ return 0;
+}
+
+static void vfe_output_init_addrs(struct vfe_device *vfe,
+ struct vfe_output *output, u8 sync,
+ struct vfe_line *line)
+{
+ u32 ping_addr;
+ u32 pong_addr;
+ unsigned int i;
+
+ output->gen1.active_buf = 0;
+
+ for (i = 0; i < output->wm_num; i++) {
+ if (output->buf[0])
+ ping_addr = output->buf[0]->addr[i];
+ else
+ ping_addr = 0;
+
+ if (output->buf[1])
+ pong_addr = output->buf[1]->addr[i];
+ else
+ pong_addr = ping_addr;
+
+ vfe->ops_gen1->wm_set_ping_addr(vfe, output->wm_idx[i], ping_addr);
+ vfe->ops_gen1->wm_set_pong_addr(vfe, output->wm_idx[i], pong_addr);
+ if (sync)
+ vfe->ops_gen1->bus_reload_wm(vfe, output->wm_idx[i]);
+ }
+}
+
+static void vfe_output_frame_drop(struct vfe_device *vfe,
+ struct vfe_output *output,
+ u32 drop_pattern)
+{
+ u8 drop_period;
+ unsigned int i;
+
+ /* We need to toggle update period to be valid on next frame */
+ output->drop_update_idx++;
+ output->drop_update_idx %= VFE_FRAME_DROP_UPDATES;
+ drop_period = VFE_FRAME_DROP_VAL + output->drop_update_idx;
+
+ for (i = 0; i < output->wm_num; i++) {
+ vfe->ops_gen1->wm_set_framedrop_period(vfe, output->wm_idx[i], drop_period);
+ vfe->ops_gen1->wm_set_framedrop_pattern(vfe, output->wm_idx[i], drop_pattern);
+ }
+
+ vfe->ops->reg_update(vfe, container_of(output, struct vfe_line, output)->id);
+}
+
+static int vfe_enable_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output = &line->output;
+ const struct vfe_hw_ops *ops = vfe->ops;
+ struct media_entity *sensor;
+ unsigned long flags;
+ unsigned int frame_skip = 0;
+ unsigned int i;
+ u16 ub_size;
+
+ ub_size = vfe->ops_gen1->get_ub_size(vfe->id);
+ if (!ub_size)
+ return -EINVAL;
+
+ sensor = camss_find_sensor(&line->subdev.entity);
+ if (sensor) {
+ struct v4l2_subdev *subdev = media_entity_to_v4l2_subdev(sensor);
+
+ v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
+ /* Max frame skip is 29 frames */
+ if (frame_skip > VFE_FRAME_DROP_VAL - 1)
+ frame_skip = VFE_FRAME_DROP_VAL - 1;
+ }
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ ops->reg_update_clear(vfe, line->id);
+
+ if (output->state != VFE_OUTPUT_RESERVED) {
+ dev_err(vfe->camss->dev, "Output is not in reserved state %d\n", output->state);
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+ return -EINVAL;
+ }
+ output->state = VFE_OUTPUT_IDLE;
+
+ output->buf[0] = vfe_buf_get_pending(output);
+ output->buf[1] = vfe_buf_get_pending(output);
+
+ if (!output->buf[0] && output->buf[1]) {
+ output->buf[0] = output->buf[1];
+ output->buf[1] = NULL;
+ }
+
+ if (output->buf[0])
+ output->state = VFE_OUTPUT_SINGLE;
+
+ if (output->buf[1])
+ output->state = VFE_OUTPUT_CONTINUOUS;
+
+ switch (output->state) {
+ case VFE_OUTPUT_SINGLE:
+ vfe_output_frame_drop(vfe, output, 1 << frame_skip);
+ break;
+ case VFE_OUTPUT_CONTINUOUS:
+ vfe_output_frame_drop(vfe, output, 3 << frame_skip);
+ break;
+ default:
+ vfe_output_frame_drop(vfe, output, 0);
+ break;
+ }
+
+ output->sequence = 0;
+ output->gen1.wait_sof = 0;
+ output->wait_reg_update = 0;
+ reinit_completion(&output->sof);
+ reinit_completion(&output->reg_update);
+
+ vfe_output_init_addrs(vfe, output, 0, line);
+
+ if (line->id != VFE_LINE_PIX) {
+ vfe->ops_gen1->set_cgc_override(vfe, output->wm_idx[0], 1);
+ vfe->ops_gen1->enable_irq_wm_line(vfe, output->wm_idx[0], line->id, 1);
+ vfe->ops_gen1->bus_connect_wm_to_rdi(vfe, output->wm_idx[0], line->id);
+ vfe->ops_gen1->wm_set_subsample(vfe, output->wm_idx[0]);
+ vfe->ops_gen1->set_rdi_cid(vfe, line->id, 0);
+ vfe->ops_gen1->wm_set_ub_cfg(vfe, output->wm_idx[0],
+ (ub_size + 1) * output->wm_idx[0], ub_size);
+ vfe->ops_gen1->wm_frame_based(vfe, output->wm_idx[0], 1);
+ vfe->ops_gen1->wm_enable(vfe, output->wm_idx[0], 1);
+ vfe->ops_gen1->bus_reload_wm(vfe, output->wm_idx[0]);
+ } else {
+ ub_size /= output->wm_num;
+ for (i = 0; i < output->wm_num; i++) {
+ vfe->ops_gen1->set_cgc_override(vfe, output->wm_idx[i], 1);
+ vfe->ops_gen1->wm_set_subsample(vfe, output->wm_idx[i]);
+ vfe->ops_gen1->wm_set_ub_cfg(vfe, output->wm_idx[i],
+ (ub_size + 1) * output->wm_idx[i], ub_size);
+ vfe->ops_gen1->wm_line_based(vfe, output->wm_idx[i],
+ &line->video_out.active_fmt.fmt.pix_mp, i, 1);
+ vfe->ops_gen1->wm_enable(vfe, output->wm_idx[i], 1);
+ vfe->ops_gen1->bus_reload_wm(vfe, output->wm_idx[i]);
+ }
+ vfe->ops_gen1->enable_irq_pix_line(vfe, 0, line->id, 1);
+ vfe->ops_gen1->set_module_cfg(vfe, 1);
+ vfe->ops_gen1->set_camif_cfg(vfe, line);
+ vfe->ops_gen1->set_realign_cfg(vfe, line, 1);
+ vfe->ops_gen1->set_xbar_cfg(vfe, output, 1);
+ vfe->ops_gen1->set_demux_cfg(vfe, line);
+ vfe->ops_gen1->set_scale_cfg(vfe, line);
+ vfe->ops_gen1->set_crop_cfg(vfe, line);
+ vfe->ops_gen1->set_clamp_cfg(vfe);
+ vfe->ops_gen1->set_camif_cmd(vfe, 1);
+ }
+
+ ops->reg_update(vfe, line->id);
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+}
+
+static int vfe_get_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output;
+ struct v4l2_format *f = &line->video_out.active_fmt;
+ unsigned long flags;
+ int i;
+ int wm_idx;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ output = &line->output;
+ if (output->state != VFE_OUTPUT_OFF) {
+ dev_err(vfe->camss->dev, "Output is running\n");
+ goto error;
+ }
+ output->state = VFE_OUTPUT_RESERVED;
+
+ output->gen1.active_buf = 0;
+
+ switch (f->fmt.pix_mp.pixelformat) {
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ output->wm_num = 2;
+ break;
+ default:
+ output->wm_num = 1;
+ break;
+ }
+
+ for (i = 0; i < output->wm_num; i++) {
+ wm_idx = vfe_reserve_wm(vfe, line->id);
+ if (wm_idx < 0) {
+ dev_err(vfe->camss->dev, "Can not reserve wm\n");
+ goto error_get_wm;
+ }
+ output->wm_idx[i] = wm_idx;
+ }
+
+ output->drop_update_idx = 0;
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+
+error_get_wm:
+ for (i--; i >= 0; i--)
+ vfe_release_wm(vfe, output->wm_idx[i]);
+ output->state = VFE_OUTPUT_OFF;
+error:
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return -EINVAL;
+}
+
+int vfe_gen1_enable(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ int ret;
+
+ mutex_lock(&vfe->stream_lock);
+
+ if (!vfe->stream_count) {
+ vfe->ops_gen1->enable_irq_common(vfe);
+ vfe->ops_gen1->bus_enable_wr_if(vfe, 1);
+ vfe->ops_gen1->set_qos(vfe);
+ vfe->ops_gen1->set_ds(vfe);
+ }
+
+ vfe->stream_count++;
+
+ mutex_unlock(&vfe->stream_lock);
+
+ ret = vfe_get_output(line);
+ if (ret < 0)
+ goto error_get_output;
+
+ ret = vfe_enable_output(line);
+ if (ret < 0)
+ goto error_enable_output;
+
+ vfe->was_streaming = 1;
+
+ return 0;
+
+
+error_enable_output:
+ vfe_put_output(line);
+
+error_get_output:
+ mutex_lock(&vfe->stream_lock);
+
+ if (vfe->stream_count == 1)
+ vfe->ops_gen1->bus_enable_wr_if(vfe, 0);
+
+ vfe->stream_count--;
+
+ mutex_unlock(&vfe->stream_lock);
+
+ return ret;
+}
+
+static void vfe_output_update_ping_addr(struct vfe_device *vfe,
+ struct vfe_output *output, u8 sync,
+ struct vfe_line *line)
+{
+ u32 addr;
+ unsigned int i;
+
+ for (i = 0; i < output->wm_num; i++) {
+ if (output->buf[0])
+ addr = output->buf[0]->addr[i];
+ else
+ addr = 0;
+
+ vfe->ops_gen1->wm_set_ping_addr(vfe, output->wm_idx[i], addr);
+ if (sync)
+ vfe->ops_gen1->bus_reload_wm(vfe, output->wm_idx[i]);
+ }
+}
+
+static void vfe_output_update_pong_addr(struct vfe_device *vfe,
+ struct vfe_output *output, u8 sync,
+ struct vfe_line *line)
+{
+ u32 addr;
+ unsigned int i;
+
+ for (i = 0; i < output->wm_num; i++) {
+ if (output->buf[1])
+ addr = output->buf[1]->addr[i];
+ else
+ addr = 0;
+
+ vfe->ops_gen1->wm_set_pong_addr(vfe, output->wm_idx[i], addr);
+ if (sync)
+ vfe->ops_gen1->bus_reload_wm(vfe, output->wm_idx[i]);
+
+ }
+
+}
+
+static void vfe_buf_update_wm_on_next(struct vfe_device *vfe,
+ struct vfe_output *output)
+{
+ switch (output->state) {
+ case VFE_OUTPUT_CONTINUOUS:
+ vfe_output_frame_drop(vfe, output, 3);
+ break;
+ case VFE_OUTPUT_SINGLE:
+ default:
+ dev_err_ratelimited(vfe->camss->dev,
+ "Next buf in wrong state! %d\n",
+ output->state);
+ break;
+ }
+}
+
+static void vfe_buf_update_wm_on_last(struct vfe_device *vfe,
+ struct vfe_output *output)
+{
+ switch (output->state) {
+ case VFE_OUTPUT_CONTINUOUS:
+ output->state = VFE_OUTPUT_SINGLE;
+ vfe_output_frame_drop(vfe, output, 1);
+ break;
+ case VFE_OUTPUT_SINGLE:
+ output->state = VFE_OUTPUT_STOPPING;
+ vfe_output_frame_drop(vfe, output, 0);
+ break;
+ default:
+ dev_err_ratelimited(vfe->camss->dev,
+ "Last buff in wrong state! %d\n",
+ output->state);
+ break;
+ }
+}
+
+static void vfe_buf_update_wm_on_new(struct vfe_device *vfe,
+ struct vfe_output *output,
+ struct camss_buffer *new_buf,
+ struct vfe_line *line)
+{
+ int inactive_idx;
+
+ switch (output->state) {
+ case VFE_OUTPUT_SINGLE:
+ inactive_idx = !output->gen1.active_buf;
+
+ if (!output->buf[inactive_idx]) {
+ output->buf[inactive_idx] = new_buf;
+
+ if (inactive_idx)
+ vfe_output_update_pong_addr(vfe, output, 0, line);
+ else
+ vfe_output_update_ping_addr(vfe, output, 0, line);
+
+ vfe_output_frame_drop(vfe, output, 3);
+ output->state = VFE_OUTPUT_CONTINUOUS;
+ } else {
+ vfe_buf_add_pending(output, new_buf);
+ dev_err_ratelimited(vfe->camss->dev,
+ "Inactive buffer is busy\n");
+ }
+ break;
+
+ case VFE_OUTPUT_IDLE:
+ if (!output->buf[0]) {
+ output->buf[0] = new_buf;
+
+ vfe_output_init_addrs(vfe, output, 1, line);
+ vfe_output_frame_drop(vfe, output, 1);
+
+ output->state = VFE_OUTPUT_SINGLE;
+ } else {
+ vfe_buf_add_pending(output, new_buf);
+ dev_err_ratelimited(vfe->camss->dev,
+ "Output idle with buffer set!\n");
+ }
+ break;
+
+ case VFE_OUTPUT_CONTINUOUS:
+ default:
+ vfe_buf_add_pending(output, new_buf);
+ break;
+ }
+}
+
+/*
+ * vfe_isr_halt_ack - Process start of frame interrupt
+ * @vfe: VFE Device
+ */
+static void vfe_isr_halt_ack(struct vfe_device *vfe)
+{
+ complete(&vfe->halt_complete);
+ vfe->ops_gen1->halt_clear(vfe);
+}
+
+/*
+ * vfe_isr_sof - Process start of frame interrupt
+ * @vfe: VFE Device
+ * @line_id: VFE line
+ */
+static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ struct vfe_output *output;
+ unsigned long flags;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ output = &vfe->line[line_id].output;
+ if (output->gen1.wait_sof) {
+ output->gen1.wait_sof = 0;
+ complete(&output->sof);
+ }
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
+/*
+ * vfe_isr_reg_update - Process reg update interrupt
+ * @vfe: VFE Device
+ * @line_id: VFE line
+ */
+static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ struct vfe_output *output;
+ struct vfe_line *line = &vfe->line[line_id];
+ unsigned long flags;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ vfe->ops->reg_update_clear(vfe, line_id);
+
+ output = &line->output;
+
+ if (output->wait_reg_update) {
+ output->wait_reg_update = 0;
+ complete(&output->reg_update);
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+ return;
+ }
+
+ if (output->state == VFE_OUTPUT_STOPPING) {
+ /* Release last buffer when hw is idle */
+ if (output->last_buffer) {
+ vb2_buffer_done(&output->last_buffer->vb.vb2_buf,
+ VB2_BUF_STATE_DONE);
+ output->last_buffer = NULL;
+ }
+ output->state = VFE_OUTPUT_IDLE;
+
+ /* Buffers received in stopping state are queued in */
+ /* dma pending queue, start next capture here */
+
+ output->buf[0] = vfe_buf_get_pending(output);
+ output->buf[1] = vfe_buf_get_pending(output);
+
+ if (!output->buf[0] && output->buf[1]) {
+ output->buf[0] = output->buf[1];
+ output->buf[1] = NULL;
+ }
+
+ if (output->buf[0])
+ output->state = VFE_OUTPUT_SINGLE;
+
+ if (output->buf[1])
+ output->state = VFE_OUTPUT_CONTINUOUS;
+
+ switch (output->state) {
+ case VFE_OUTPUT_SINGLE:
+ vfe_output_frame_drop(vfe, output, 2);
+ break;
+ case VFE_OUTPUT_CONTINUOUS:
+ vfe_output_frame_drop(vfe, output, 3);
+ break;
+ default:
+ vfe_output_frame_drop(vfe, output, 0);
+ break;
+ }
+
+ vfe_output_init_addrs(vfe, output, 1, &vfe->line[line_id]);
+ }
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
+/*
+ * vfe_isr_wm_done - Process write master done interrupt
+ * @vfe: VFE Device
+ * @wm: Write master id
+ */
+static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
+{
+ struct camss_buffer *ready_buf;
+ struct vfe_output *output;
+ dma_addr_t *new_addr;
+ unsigned long flags;
+ u32 active_index;
+ u64 ts = ktime_get_ns();
+ unsigned int i;
+
+ active_index = vfe->ops_gen1->wm_get_ping_pong_status(vfe, wm);
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
+ dev_err_ratelimited(vfe->camss->dev,
+ "Received wm done for unmapped index\n");
+ goto out_unlock;
+ }
+ output = &vfe->line[vfe->wm_output_map[wm]].output;
+
+ if (output->gen1.active_buf == active_index && 0) {
+ dev_err_ratelimited(vfe->camss->dev,
+ "Active buffer mismatch!\n");
+ goto out_unlock;
+ }
+ output->gen1.active_buf = active_index;
+
+ ready_buf = output->buf[!active_index];
+ if (!ready_buf) {
+ dev_err_ratelimited(vfe->camss->dev,
+ "Missing ready buf %d %d!\n",
+ !active_index, output->state);
+ goto out_unlock;
+ }
+
+ ready_buf->vb.vb2_buf.timestamp = ts;
+ ready_buf->vb.sequence = output->sequence++;
+
+ /* Get next buffer */
+ output->buf[!active_index] = vfe_buf_get_pending(output);
+ if (!output->buf[!active_index]) {
+ /* No next buffer - set same address */
+ new_addr = ready_buf->addr;
+ vfe_buf_update_wm_on_last(vfe, output);
+ } else {
+ new_addr = output->buf[!active_index]->addr;
+ vfe_buf_update_wm_on_next(vfe, output);
+ }
+
+ if (active_index)
+ for (i = 0; i < output->wm_num; i++)
+ vfe->ops_gen1->wm_set_ping_addr(vfe, output->wm_idx[i], new_addr[i]);
+ else
+ for (i = 0; i < output->wm_num; i++)
+ vfe->ops_gen1->wm_set_pong_addr(vfe, output->wm_idx[i], new_addr[i]);
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ if (output->state == VFE_OUTPUT_STOPPING)
+ output->last_buffer = ready_buf;
+ else
+ vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+
+ return;
+
+out_unlock:
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
+/*
+ * vfe_queue_buffer - Add empty buffer
+ * @vid: Video device structure
+ * @buf: Buffer to be enqueued
+ *
+ * Add an empty buffer - depending on the current number of buffers it will be
+ * put in pending buffer queue or directly given to the hardware to be filled.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_queue_buffer(struct camss_video *vid, struct camss_buffer *buf)
+{
+ struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output;
+ unsigned long flags;
+
+ output = &line->output;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ vfe_buf_update_wm_on_new(vfe, output, buf, line);
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+}
+
+inline u8 vfe_calc_interp_reso(u16 input, u16 output)
+{
+ if (input / output >= 16)
+ return 0;
+
+ if (input / output >= 8)
+ return 1;
+
+ if (input / output >= 4)
+ return 2;
+
+ return 3;
+}
+
+#define CALC_WORD(width, M, N) (((width) * (M) + (N) - 1) / (N))
+
+int vfe_word_per_line(u32 format, u32 width)
+{
+ int val = 0;
+
+ switch (format) {
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ val = CALC_WORD(width, 1, 8);
+ break;
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_YVYU:
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_VYUY:
+ val = CALC_WORD(width, 2, 8);
+ break;
+ }
+
+ return val;
+}
+
+const struct vfe_isr_ops vfe_isr_ops_gen1 = {
+ .reset_ack = vfe_isr_reset_ack,
+ .halt_ack = vfe_isr_halt_ack,
+ .reg_update = vfe_isr_reg_update,
+ .sof = vfe_isr_sof,
+ .comp_done = vfe_isr_comp_done,
+ .wm_done = vfe_isr_wm_done,
+};
+
+const struct camss_video_ops vfe_video_ops_gen1 = {
+ .queue_buffer = vfe_queue_buffer,
+ .flush_buffers = vfe_flush_buffers,
+};
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-gen1.h b/drivers/media/platform/qcom/camss/camss-vfe-gen1.h
new file mode 100644
index 000000000000..42e8a3333034
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-vfe-gen1.h
@@ -0,0 +1,110 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * camss-vfe.h
+ *
+ * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module
+ *
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2018 Linaro Ltd.
+ */
+#ifndef QC_MSM_CAMSS_VFE_GEN1_H
+#define QC_MSM_CAMSS_VFE_GEN1_H
+
+
+#include "camss-vfe.h"
+
+
+enum vfe_line_id;
+struct vfe_device;
+struct vfe_line;
+struct vfe_output;
+
+struct vfe_hw_ops_gen1 {
+ void (*bus_connect_wm_to_rdi)(struct vfe_device *vfe, u8 wm, enum vfe_line_id id);
+ void (*bus_disconnect_wm_from_rdi)(struct vfe_device *vfe, u8 wm, enum vfe_line_id id);
+ void (*bus_enable_wr_if)(struct vfe_device *vfe, u8 enable);
+ void (*bus_reload_wm)(struct vfe_device *vfe, u8 wm);
+ int (*camif_wait_for_stop)(struct vfe_device *vfe, struct device *dev);
+ void (*enable_irq_common)(struct vfe_device *vfe);
+ void (*enable_irq_wm_line)(struct vfe_device *vfe, u8 wm, enum vfe_line_id line_id,
+ u8 enable);
+ void (*enable_irq_pix_line)(struct vfe_device *vfe, u8 comp, enum vfe_line_id line_id,
+ u8 enable);
+ u16 (*get_ub_size)(u8 vfe_id);
+ void (*halt_clear)(struct vfe_device *vfe);
+ void (*halt_request)(struct vfe_device *vfe);
+ void (*set_camif_cfg)(struct vfe_device *vfe, struct vfe_line *line);
+ void (*set_camif_cmd)(struct vfe_device *vfe, u8 enable);
+ void (*set_cgc_override)(struct vfe_device *vfe, u8 wm, u8 enable);
+ void (*set_clamp_cfg)(struct vfe_device *vfe);
+ void (*set_crop_cfg)(struct vfe_device *vfe, struct vfe_line *line);
+ void (*set_demux_cfg)(struct vfe_device *vfe, struct vfe_line *line);
+ void (*set_ds)(struct vfe_device *vfe);
+ void (*set_module_cfg)(struct vfe_device *vfe, u8 enable);
+ void (*set_scale_cfg)(struct vfe_device *vfe, struct vfe_line *line);
+ void (*set_rdi_cid)(struct vfe_device *vfe, enum vfe_line_id id, u8 cid);
+ void (*set_realign_cfg)(struct vfe_device *vfe, struct vfe_line *line, u8 enable);
+ void (*set_qos)(struct vfe_device *vfe);
+ void (*set_xbar_cfg)(struct vfe_device *vfe, struct vfe_output *output, u8 enable);
+ void (*wm_frame_based)(struct vfe_device *vfe, u8 wm, u8 enable);
+ void (*wm_line_based)(struct vfe_device *vfe, u32 wm, struct v4l2_pix_format_mplane *pix,
+ u8 plane, u32 enable);
+ void (*wm_set_ub_cfg)(struct vfe_device *vfe, u8 wm, u16 offset, u16 depth);
+ void (*wm_set_subsample)(struct vfe_device *vfe, u8 wm);
+ void (*wm_set_framedrop_period)(struct vfe_device *vfe, u8 wm, u8 per);
+ void (*wm_set_framedrop_pattern)(struct vfe_device *vfe, u8 wm, u32 pattern);
+ void (*wm_set_ping_addr)(struct vfe_device *vfe, u8 wm, u32 addr);
+ void (*wm_set_pong_addr)(struct vfe_device *vfe, u8 wm, u32 addr);
+ int (*wm_get_ping_pong_status)(struct vfe_device *vfe, u8 wm);
+ void (*wm_enable)(struct vfe_device *vfe, u8 wm, u8 enable);
+};
+
+/*
+ * vfe_calc_interp_reso - Calculate interpolation mode
+ * @input: Input resolution
+ * @output: Output resolution
+ *
+ * Return interpolation mode
+ */
+inline u8 vfe_calc_interp_reso(u16 input, u16 output);
+
+/*
+ * vfe_gen1_disable - Disable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_gen1_disable(struct vfe_line *line);
+
+
+/*
+ * vfe_gen1_enable - Enable VFE module
+ * @line: VFE line
+ *
+ * Return 0 on success
+ */
+int vfe_gen1_enable(struct vfe_line *line);
+
+/*
+ * vfe_gen1_enable - Halt VFE module
+ * @vfe: VFE device
+ *
+ * Return 0 on success
+ */
+int vfe_gen1_halt(struct vfe_device *vfe);
+
+/*
+ * vfe_word_per_line - Calculate number of words per frame width
+ * @format: V4L2 format
+ * @width: Frame width
+ *
+ * Return number of words per frame width
+ */
+int vfe_word_per_line(u32 format, u32 width);
+
+
+extern const struct vfe_isr_ops vfe_isr_ops_gen1;
+extern const struct camss_video_ops vfe_video_ops_gen1;
+
+
+#endif /* QC_MSM_CAMSS_VFE_GEN1_H */
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 94c9ca7d5cbb..75b4e866c01b 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -26,22 +26,8 @@
#define MSM_VFE_NAME "msm_vfe"
-#define vfe_line_array(ptr_line) \
- ((const struct vfe_line (*)[]) &(ptr_line[-(ptr_line->id)]))
-
-#define to_vfe(ptr_line) \
- container_of(vfe_line_array(ptr_line), struct vfe_device, line)
-
/* VFE reset timeout */
#define VFE_RESET_TIMEOUT_MS 50
-/* VFE halt timeout */
-#define VFE_HALT_TIMEOUT_MS 100
-/* Max number of frame drop updates per frame */
-#define VFE_FRAME_DROP_UPDATES 2
-/* Frame drop value. VAL + UPDATES - 1 should not exceed 31 */
-#define VFE_FRAME_DROP_VAL 30
-
-#define VFE_NEXT_SOF_MS 500
#define SCALER_RATIO_MAX 16
@@ -294,30 +280,6 @@ static int vfe_reset(struct vfe_device *vfe)
return 0;
}
-/*
- * vfe_halt - Trigger halt on VFE module and wait to complete
- * @vfe: VFE device
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_halt(struct vfe_device *vfe)
-{
- unsigned long time;
-
- reinit_completion(&vfe->halt_complete);
-
- vfe->ops->halt_request(vfe);
-
- time = wait_for_completion_timeout(&vfe->halt_complete,
- msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));
- if (!time) {
- dev_err(vfe->camss->dev, "VFE halt timeout\n");
- return -EIO;
- }
-
- return 0;
-}
-
static void vfe_init_outputs(struct vfe_device *vfe)
{
int i;
@@ -340,71 +302,7 @@ static void vfe_reset_output_maps(struct vfe_device *vfe)
vfe->wm_output_map[i] = VFE_LINE_NONE;
}
-static void vfe_output_init_addrs(struct vfe_device *vfe,
- struct vfe_output *output, u8 sync)
-{
- u32 ping_addr;
- u32 pong_addr;
- unsigned int i;
-
- output->active_buf = 0;
-
- for (i = 0; i < output->wm_num; i++) {
- if (output->buf[0])
- ping_addr = output->buf[0]->addr[i];
- else
- ping_addr = 0;
-
- if (output->buf[1])
- pong_addr = output->buf[1]->addr[i];
- else
- pong_addr = ping_addr;
-
- vfe->ops->wm_set_ping_addr(vfe, output->wm_idx[i], ping_addr);
- vfe->ops->wm_set_pong_addr(vfe, output->wm_idx[i], pong_addr);
- if (sync)
- vfe->ops->bus_reload_wm(vfe, output->wm_idx[i]);
- }
-}
-
-static void vfe_output_update_ping_addr(struct vfe_device *vfe,
- struct vfe_output *output, u8 sync)
-{
- u32 addr;
- unsigned int i;
-
- for (i = 0; i < output->wm_num; i++) {
- if (output->buf[0])
- addr = output->buf[0]->addr[i];
- else
- addr = 0;
-
- vfe->ops->wm_set_ping_addr(vfe, output->wm_idx[i], addr);
- if (sync)
- vfe->ops->bus_reload_wm(vfe, output->wm_idx[i]);
- }
-}
-
-static void vfe_output_update_pong_addr(struct vfe_device *vfe,
- struct vfe_output *output, u8 sync)
-{
- u32 addr;
- unsigned int i;
-
- for (i = 0; i < output->wm_num; i++) {
- if (output->buf[1])
- addr = output->buf[1]->addr[i];
- else
- addr = 0;
-
- vfe->ops->wm_set_pong_addr(vfe, output->wm_idx[i], addr);
- if (sync)
- vfe->ops->bus_reload_wm(vfe, output->wm_idx[i]);
- }
-
-}
-
-static int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id)
+int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id)
{
int ret = -EBUSY;
int i;
@@ -420,7 +318,7 @@ static int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id)
return ret;
}
-static int vfe_release_wm(struct vfe_device *vfe, u8 wm)
+int vfe_release_wm(struct vfe_device *vfe, u8 wm)
{
if (wm >= ARRAY_SIZE(vfe->wm_output_map))
return -EINVAL;
@@ -430,29 +328,7 @@ static int vfe_release_wm(struct vfe_device *vfe, u8 wm)
return 0;
}
-static void vfe_output_frame_drop(struct vfe_device *vfe,
- struct vfe_output *output,
- u32 drop_pattern)
-{
- u8 drop_period;
- unsigned int i;
-
- /* We need to toggle update period to be valid on next frame */
- output->drop_update_idx++;
- output->drop_update_idx %= VFE_FRAME_DROP_UPDATES;
- drop_period = VFE_FRAME_DROP_VAL + output->drop_update_idx;
-
- for (i = 0; i < output->wm_num; i++) {
- vfe->ops->wm_set_framedrop_period(vfe, output->wm_idx[i],
- drop_period);
- vfe->ops->wm_set_framedrop_pattern(vfe, output->wm_idx[i],
- drop_pattern);
- }
- vfe->ops->reg_update(vfe,
- container_of(output, struct vfe_line, output)->id);
-}
-
-static struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output)
+struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output)
{
struct camss_buffer *buffer = NULL;
@@ -466,13 +342,8 @@ static struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output)
return buffer;
}
-/*
- * vfe_buf_add_pending - Add output buffer to list of pending
- * @output: VFE output
- * @buffer: Video buffer
- */
-static void vfe_buf_add_pending(struct vfe_output *output,
- struct camss_buffer *buffer)
+void vfe_buf_add_pending(struct vfe_output *output,
+ struct camss_buffer *buffer)
{
INIT_LIST_HEAD(&buffer->queue);
list_add_tail(&buffer->queue, &output->pending_bufs);
@@ -495,149 +366,7 @@ static void vfe_buf_flush_pending(struct vfe_output *output,
}
}
-static void vfe_buf_update_wm_on_next(struct vfe_device *vfe,
- struct vfe_output *output)
-{
- switch (output->state) {
- case VFE_OUTPUT_CONTINUOUS:
- vfe_output_frame_drop(vfe, output, 3);
- break;
- case VFE_OUTPUT_SINGLE:
- default:
- dev_err_ratelimited(vfe->camss->dev,
- "Next buf in wrong state! %d\n",
- output->state);
- break;
- }
-}
-
-static void vfe_buf_update_wm_on_last(struct vfe_device *vfe,
- struct vfe_output *output)
-{
- switch (output->state) {
- case VFE_OUTPUT_CONTINUOUS:
- output->state = VFE_OUTPUT_SINGLE;
- vfe_output_frame_drop(vfe, output, 1);
- break;
- case VFE_OUTPUT_SINGLE:
- output->state = VFE_OUTPUT_STOPPING;
- vfe_output_frame_drop(vfe, output, 0);
- break;
- default:
- dev_err_ratelimited(vfe->camss->dev,
- "Last buff in wrong state! %d\n",
- output->state);
- break;
- }
-}
-
-static void vfe_buf_update_wm_on_new(struct vfe_device *vfe,
- struct vfe_output *output,
- struct camss_buffer *new_buf)
-{
- int inactive_idx;
-
- switch (output->state) {
- case VFE_OUTPUT_SINGLE:
- inactive_idx = !output->active_buf;
-
- if (!output->buf[inactive_idx]) {
- output->buf[inactive_idx] = new_buf;
-
- if (inactive_idx)
- vfe_output_update_pong_addr(vfe, output, 0);
- else
- vfe_output_update_ping_addr(vfe, output, 0);
-
- vfe_output_frame_drop(vfe, output, 3);
- output->state = VFE_OUTPUT_CONTINUOUS;
- } else {
- vfe_buf_add_pending(output, new_buf);
- dev_err_ratelimited(vfe->camss->dev,
- "Inactive buffer is busy\n");
- }
- break;
-
- case VFE_OUTPUT_IDLE:
- if (!output->buf[0]) {
- output->buf[0] = new_buf;
-
- vfe_output_init_addrs(vfe, output, 1);
-
- vfe_output_frame_drop(vfe, output, 1);
- output->state = VFE_OUTPUT_SINGLE;
- } else {
- vfe_buf_add_pending(output, new_buf);
- dev_err_ratelimited(vfe->camss->dev,
- "Output idle with buffer set!\n");
- }
- break;
-
- case VFE_OUTPUT_CONTINUOUS:
- default:
- vfe_buf_add_pending(output, new_buf);
- break;
- }
-}
-
-static int vfe_get_output(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
- struct vfe_output *output;
- struct v4l2_format *f = &line->video_out.active_fmt;
- unsigned long flags;
- int i;
- int wm_idx;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- output = &line->output;
- if (output->state != VFE_OUTPUT_OFF) {
- dev_err(vfe->camss->dev, "Output is running\n");
- goto error;
- }
- output->state = VFE_OUTPUT_RESERVED;
-
- output->active_buf = 0;
-
- switch (f->fmt.pix_mp.pixelformat) {
- case V4L2_PIX_FMT_NV12:
- case V4L2_PIX_FMT_NV21:
- case V4L2_PIX_FMT_NV16:
- case V4L2_PIX_FMT_NV61:
- output->wm_num = 2;
- break;
- default:
- output->wm_num = 1;
- break;
- }
-
- for (i = 0; i < output->wm_num; i++) {
- wm_idx = vfe_reserve_wm(vfe, line->id);
- if (wm_idx < 0) {
- dev_err(vfe->camss->dev, "Can not reserve wm\n");
- goto error_get_wm;
- }
- output->wm_idx[i] = wm_idx;
- }
-
- output->drop_update_idx = 0;
-
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- return 0;
-
-error_get_wm:
- for (i--; i >= 0; i--)
- vfe_release_wm(vfe, output->wm_idx[i]);
- output->state = VFE_OUTPUT_OFF;
-error:
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- return -EINVAL;
-}
-
-static int vfe_put_output(struct vfe_line *line)
+int vfe_put_output(struct vfe_line *line)
{
struct vfe_device *vfe = to_vfe(line);
struct vfe_output *output = &line->output;
@@ -655,454 +384,27 @@ static int vfe_put_output(struct vfe_line *line)
return 0;
}
-static int vfe_enable_output(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
- struct vfe_output *output = &line->output;
- const struct vfe_hw_ops *ops = vfe->ops;
- struct media_entity *sensor;
- unsigned long flags;
- unsigned int frame_skip = 0;
- unsigned int i;
- u16 ub_size;
-
- ub_size = ops->get_ub_size(vfe->id);
- if (!ub_size)
- return -EINVAL;
-
- sensor = camss_find_sensor(&line->subdev.entity);
- if (sensor) {
- struct v4l2_subdev *subdev =
- media_entity_to_v4l2_subdev(sensor);
-
- v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
- /* Max frame skip is 29 frames */
- if (frame_skip > VFE_FRAME_DROP_VAL - 1)
- frame_skip = VFE_FRAME_DROP_VAL - 1;
- }
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- ops->reg_update_clear(vfe, line->id);
-
- if (output->state != VFE_OUTPUT_RESERVED) {
- dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",
- output->state);
- spin_unlock_irqrestore(&vfe->output_lock, flags);
- return -EINVAL;
- }
- output->state = VFE_OUTPUT_IDLE;
-
- output->buf[0] = vfe_buf_get_pending(output);
- output->buf[1] = vfe_buf_get_pending(output);
-
- if (!output->buf[0] && output->buf[1]) {
- output->buf[0] = output->buf[1];
- output->buf[1] = NULL;
- }
-
- if (output->buf[0])
- output->state = VFE_OUTPUT_SINGLE;
-
- if (output->buf[1])
- output->state = VFE_OUTPUT_CONTINUOUS;
-
- switch (output->state) {
- case VFE_OUTPUT_SINGLE:
- vfe_output_frame_drop(vfe, output, 1 << frame_skip);
- break;
- case VFE_OUTPUT_CONTINUOUS:
- vfe_output_frame_drop(vfe, output, 3 << frame_skip);
- break;
- default:
- vfe_output_frame_drop(vfe, output, 0);
- break;
- }
-
- output->sequence = 0;
- output->wait_sof = 0;
- output->wait_reg_update = 0;
- reinit_completion(&output->sof);
- reinit_completion(&output->reg_update);
-
- vfe_output_init_addrs(vfe, output, 0);
-
- if (line->id != VFE_LINE_PIX) {
- ops->set_cgc_override(vfe, output->wm_idx[0], 1);
- ops->enable_irq_wm_line(vfe, output->wm_idx[0], line->id, 1);
- ops->bus_connect_wm_to_rdi(vfe, output->wm_idx[0], line->id);
- ops->wm_set_subsample(vfe, output->wm_idx[0]);
- ops->set_rdi_cid(vfe, line->id, 0);
- ops->wm_set_ub_cfg(vfe, output->wm_idx[0],
- (ub_size + 1) * output->wm_idx[0], ub_size);
- ops->wm_frame_based(vfe, output->wm_idx[0], 1);
- ops->wm_enable(vfe, output->wm_idx[0], 1);
- ops->bus_reload_wm(vfe, output->wm_idx[0]);
- } else {
- ub_size /= output->wm_num;
- for (i = 0; i < output->wm_num; i++) {
- ops->set_cgc_override(vfe, output->wm_idx[i], 1);
- ops->wm_set_subsample(vfe, output->wm_idx[i]);
- ops->wm_set_ub_cfg(vfe, output->wm_idx[i],
- (ub_size + 1) * output->wm_idx[i],
- ub_size);
- ops->wm_line_based(vfe, output->wm_idx[i],
- &line->video_out.active_fmt.fmt.pix_mp,
- i, 1);
- ops->wm_enable(vfe, output->wm_idx[i], 1);
- ops->bus_reload_wm(vfe, output->wm_idx[i]);
- }
- ops->enable_irq_pix_line(vfe, 0, line->id, 1);
- ops->set_module_cfg(vfe, 1);
- ops->set_camif_cfg(vfe, line);
- ops->set_realign_cfg(vfe, line, 1);
- ops->set_xbar_cfg(vfe, output, 1);
- ops->set_demux_cfg(vfe, line);
- ops->set_scale_cfg(vfe, line);
- ops->set_crop_cfg(vfe, line);
- ops->set_clamp_cfg(vfe);
- ops->set_camif_cmd(vfe, 1);
- }
-
- ops->reg_update(vfe, line->id);
-
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- return 0;
-}
-
-static int vfe_disable_output(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
- struct vfe_output *output = &line->output;
- const struct vfe_hw_ops *ops = vfe->ops;
- unsigned long flags;
- unsigned long time;
- unsigned int i;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- output->wait_sof = 1;
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- time = wait_for_completion_timeout(&output->sof,
- msecs_to_jiffies(VFE_NEXT_SOF_MS));
- if (!time)
- dev_err(vfe->camss->dev, "VFE sof timeout\n");
-
- spin_lock_irqsave(&vfe->output_lock, flags);
- for (i = 0; i < output->wm_num; i++)
- ops->wm_enable(vfe, output->wm_idx[i], 0);
-
- ops->reg_update(vfe, line->id);
- output->wait_reg_update = 1;
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- time = wait_for_completion_timeout(&output->reg_update,
- msecs_to_jiffies(VFE_NEXT_SOF_MS));
- if (!time)
- dev_err(vfe->camss->dev, "VFE reg update timeout\n");
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- if (line->id != VFE_LINE_PIX) {
- ops->wm_frame_based(vfe, output->wm_idx[0], 0);
- ops->bus_disconnect_wm_from_rdi(vfe, output->wm_idx[0],
- line->id);
- ops->enable_irq_wm_line(vfe, output->wm_idx[0], line->id, 0);
- ops->set_cgc_override(vfe, output->wm_idx[0], 0);
- spin_unlock_irqrestore(&vfe->output_lock, flags);
- } else {
- for (i = 0; i < output->wm_num; i++) {
- ops->wm_line_based(vfe, output->wm_idx[i], NULL, i, 0);
- ops->set_cgc_override(vfe, output->wm_idx[i], 0);
- }
-
- ops->enable_irq_pix_line(vfe, 0, line->id, 0);
- ops->set_module_cfg(vfe, 0);
- ops->set_realign_cfg(vfe, line, 0);
- ops->set_xbar_cfg(vfe, output, 0);
-
- ops->set_camif_cmd(vfe, 0);
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- ops->camif_wait_for_stop(vfe, vfe->camss->dev);
- }
-
- return 0;
-}
-
-/*
- * vfe_enable - Enable streaming on VFE line
- * @line: VFE line
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_enable(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
- int ret;
-
- mutex_lock(&vfe->stream_lock);
-
- if (!vfe->stream_count) {
- vfe->ops->enable_irq_common(vfe);
-
- vfe->ops->bus_enable_wr_if(vfe, 1);
-
- vfe->ops->set_qos(vfe);
-
- vfe->ops->set_ds(vfe);
- }
-
- vfe->stream_count++;
-
- mutex_unlock(&vfe->stream_lock);
-
- ret = vfe_get_output(line);
- if (ret < 0)
- goto error_get_output;
-
- ret = vfe_enable_output(line);
- if (ret < 0)
- goto error_enable_output;
-
- vfe->was_streaming = 1;
-
- return 0;
-
-
-error_enable_output:
- vfe_put_output(line);
-
-error_get_output:
- mutex_lock(&vfe->stream_lock);
-
- if (vfe->stream_count == 1)
- vfe->ops->bus_enable_wr_if(vfe, 0);
-
- vfe->stream_count--;
-
- mutex_unlock(&vfe->stream_lock);
-
- return ret;
-}
-
-/*
- * vfe_disable - Disable streaming on VFE line
- * @line: VFE line
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_disable(struct vfe_line *line)
-{
- struct vfe_device *vfe = to_vfe(line);
-
- vfe_disable_output(line);
-
- vfe_put_output(line);
-
- mutex_lock(&vfe->stream_lock);
-
- if (vfe->stream_count == 1)
- vfe->ops->bus_enable_wr_if(vfe, 0);
-
- vfe->stream_count--;
-
- mutex_unlock(&vfe->stream_lock);
-
- return 0;
-}
-
-/*
- * vfe_isr_sof - Process start of frame interrupt
- * @vfe: VFE Device
- * @line_id: VFE line
- */
-static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)
-{
- struct vfe_output *output;
- unsigned long flags;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
- output = &vfe->line[line_id].output;
- if (output->wait_sof) {
- output->wait_sof = 0;
- complete(&output->sof);
- }
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-}
-
-/*
- * vfe_isr_reg_update - Process reg update interrupt
- * @vfe: VFE Device
- * @line_id: VFE line
- */
-static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
-{
- struct vfe_output *output;
- unsigned long flags;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
- vfe->ops->reg_update_clear(vfe, line_id);
-
- output = &vfe->line[line_id].output;
-
- if (output->wait_reg_update) {
- output->wait_reg_update = 0;
- complete(&output->reg_update);
- spin_unlock_irqrestore(&vfe->output_lock, flags);
- return;
- }
-
- if (output->state == VFE_OUTPUT_STOPPING) {
- /* Release last buffer when hw is idle */
- if (output->last_buffer) {
- vb2_buffer_done(&output->last_buffer->vb.vb2_buf,
- VB2_BUF_STATE_DONE);
- output->last_buffer = NULL;
- }
- output->state = VFE_OUTPUT_IDLE;
-
- /* Buffers received in stopping state are queued in */
- /* dma pending queue, start next capture here */
-
- output->buf[0] = vfe_buf_get_pending(output);
- output->buf[1] = vfe_buf_get_pending(output);
-
- if (!output->buf[0] && output->buf[1]) {
- output->buf[0] = output->buf[1];
- output->buf[1] = NULL;
- }
-
- if (output->buf[0])
- output->state = VFE_OUTPUT_SINGLE;
-
- if (output->buf[1])
- output->state = VFE_OUTPUT_CONTINUOUS;
-
- switch (output->state) {
- case VFE_OUTPUT_SINGLE:
- vfe_output_frame_drop(vfe, output, 2);
- break;
- case VFE_OUTPUT_CONTINUOUS:
- vfe_output_frame_drop(vfe, output, 3);
- break;
- default:
- vfe_output_frame_drop(vfe, output, 0);
- break;
- }
-
- vfe_output_init_addrs(vfe, output, 1);
- }
-
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-}
-
-/*
- * vfe_isr_wm_done - Process write master done interrupt
- * @vfe: VFE Device
- * @wm: Write master id
- */
-static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
-{
- struct camss_buffer *ready_buf;
- struct vfe_output *output;
- dma_addr_t *new_addr;
- unsigned long flags;
- u32 active_index;
- u64 ts = ktime_get_ns();
- unsigned int i;
-
- active_index = vfe->ops->wm_get_ping_pong_status(vfe, wm);
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
- dev_err_ratelimited(vfe->camss->dev,
- "Received wm done for unmapped index\n");
- goto out_unlock;
- }
- output = &vfe->line[vfe->wm_output_map[wm]].output;
-
- if (output->active_buf == active_index) {
- dev_err_ratelimited(vfe->camss->dev,
- "Active buffer mismatch!\n");
- goto out_unlock;
- }
- output->active_buf = active_index;
-
- ready_buf = output->buf[!active_index];
- if (!ready_buf) {
- dev_err_ratelimited(vfe->camss->dev,
- "Missing ready buf %d %d!\n",
- !active_index, output->state);
- goto out_unlock;
- }
-
- ready_buf->vb.vb2_buf.timestamp = ts;
- ready_buf->vb.sequence = output->sequence++;
-
- /* Get next buffer */
- output->buf[!active_index] = vfe_buf_get_pending(output);
- if (!output->buf[!active_index]) {
- /* No next buffer - set same address */
- new_addr = ready_buf->addr;
- vfe_buf_update_wm_on_last(vfe, output);
- } else {
- new_addr = output->buf[!active_index]->addr;
- vfe_buf_update_wm_on_next(vfe, output);
- }
-
- if (active_index)
- for (i = 0; i < output->wm_num; i++)
- vfe->ops->wm_set_ping_addr(vfe, output->wm_idx[i],
- new_addr[i]);
- else
- for (i = 0; i < output->wm_num; i++)
- vfe->ops->wm_set_pong_addr(vfe, output->wm_idx[i],
- new_addr[i]);
-
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- if (output->state == VFE_OUTPUT_STOPPING)
- output->last_buffer = ready_buf;
- else
- vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
-
- return;
-
-out_unlock:
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-}
-
/**
* vfe_isr_comp_done() - Process composite image done interrupt
* @vfe: VFE Device
* @comp: Composite image id
*/
-static void vfe_isr_comp_done(struct vfe_device *vfe, u8 comp)
+void vfe_isr_comp_done(struct vfe_device *vfe, u8 comp)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(vfe->wm_output_map); i++)
if (vfe->wm_output_map[i] == VFE_LINE_PIX) {
- vfe_isr_wm_done(vfe, i);
+ vfe->isr_ops.wm_done(vfe, i);
break;
}
}
-static inline void vfe_isr_reset_ack(struct vfe_device *vfe)
+void vfe_isr_reset_ack(struct vfe_device *vfe)
{
complete(&vfe->reset_complete);
}
-static inline void vfe_isr_halt_ack(struct vfe_device *vfe)
-{
- complete(&vfe->halt_complete);
- vfe->ops->halt_clear(vfe);
-}
-
/*
* vfe_set_clock_rates - Calculate and set clock rates on VFE module
* @vfe: VFE device
@@ -1318,7 +620,7 @@ static void vfe_put(struct vfe_device *vfe)
} else if (vfe->power_count == 1) {
if (vfe->was_streaming) {
vfe->was_streaming = 0;
- vfe_halt(vfe);
+ vfe->ops->vfe_halt(vfe);
}
camss_disable_clocks(vfe->nclocks, vfe->clock);
pm_runtime_put_sync(vfe->camss->dev);
@@ -1331,35 +633,6 @@ static void vfe_put(struct vfe_device *vfe)
mutex_unlock(&vfe->power_lock);
}
-/*
- * vfe_queue_buffer - Add empty buffer
- * @vid: Video device structure
- * @buf: Buffer to be enqueued
- *
- * Add an empty buffer - depending on the current number of buffers it will be
- * put in pending buffer queue or directly given to the hardware to be filled.
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_queue_buffer(struct camss_video *vid,
- struct camss_buffer *buf)
-{
- struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
- struct vfe_device *vfe = to_vfe(line);
- struct vfe_output *output;
- unsigned long flags;
-
- output = &line->output;
-
- spin_lock_irqsave(&vfe->output_lock, flags);
-
- vfe_buf_update_wm_on_new(vfe, output, buf);
-
- spin_unlock_irqrestore(&vfe->output_lock, flags);
-
- return 0;
-}
-
/*
* vfe_flush_buffers - Return all vb2 buffers
* @vid: Video device structure
@@ -1370,8 +643,8 @@ static int vfe_queue_buffer(struct camss_video *vid,
*
* Return 0 on success or a negative error code otherwise
*/
-static int vfe_flush_buffers(struct camss_video *vid,
- enum vb2_buffer_state state)
+int vfe_flush_buffers(struct camss_video *vid,
+ enum vb2_buffer_state state)
{
struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
struct vfe_device *vfe = to_vfe(line);
@@ -1442,12 +715,12 @@ static int vfe_set_stream(struct v4l2_subdev *sd, int enable)
int ret;
if (enable) {
- ret = vfe_enable(line);
+ ret = vfe->ops->vfe_enable(line);
if (ret < 0)
dev_err(vfe->camss->dev,
"Failed to enable vfe outputs\n");
} else {
- ret = vfe_disable(line);
+ ret = vfe->ops->vfe_disable(line);
if (ret < 0)
dev_err(vfe->camss->dev,
"Failed to disable vfe outputs\n");
@@ -1985,13 +1258,6 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
int i, j;
int ret;
- vfe->isr_ops.reset_ack = vfe_isr_reset_ack;
- vfe->isr_ops.halt_ack = vfe_isr_halt_ack;
- vfe->isr_ops.reg_update = vfe_isr_reg_update;
- vfe->isr_ops.sof = vfe_isr_sof;
- vfe->isr_ops.comp_done = vfe_isr_comp_done;
- vfe->isr_ops.wm_done = vfe_isr_wm_done;
-
switch (camss->version) {
case CAMSS_8x16:
vfe->ops = &vfe_ops_4_1;
@@ -2005,6 +1271,7 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
default:
return -EINVAL;
}
+ vfe->ops->subdev_init(vfe);
/* Memory */
@@ -2209,11 +1476,6 @@ static const struct media_entity_operations vfe_media_ops = {
.link_validate = v4l2_subdev_link_validate,
};
-static const struct camss_video_ops camss_vfe_video_ops = {
- .queue_buffer = vfe_queue_buffer,
- .flush_buffers = vfe_flush_buffers,
-};
-
/*
* msm_vfe_register_entities - Register subdev node for VFE module
* @vfe: VFE device
@@ -2279,7 +1541,7 @@ int msm_vfe_register_entities(struct vfe_device *vfe,
goto error_reg_subdev;
}
- video_out->ops = &camss_vfe_video_ops;
+ video_out->ops = &vfe->video_ops;
video_out->bpl_alignment = 8;
video_out->line_based = 0;
if (i == VFE_LINE_PIX) {
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index 5bce6736e4bb..8629c833f130 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -17,6 +17,8 @@
#include <media/v4l2-subdev.h>
#include "camss-video.h"
+#include "camss-vfe-gen1.h"
+
#define MSM_VFE_PAD_SINK 0
#define MSM_VFE_PAD_SRC 1
@@ -26,6 +28,18 @@
#define MSM_VFE_IMAGE_MASTERS_NUM 7
#define MSM_VFE_COMPOSITE_IRQ_NUM 4
+/* VFE halt timeout */
+#define VFE_HALT_TIMEOUT_MS 100
+/* Frame drop value. VAL + UPDATES - 1 should not exceed 31 */
+#define VFE_FRAME_DROP_VAL 30
+
+#define vfe_line_array(ptr_line) \
+ ((const struct vfe_line (*)[]) &(ptr_line[-(ptr_line->id)]))
+
+#define to_vfe(ptr_line) \
+ container_of(vfe_line_array(ptr_line), struct vfe_device, line)
+
+
enum vfe_output_state {
VFE_OUTPUT_OFF,
VFE_OUTPUT_RESERVED,
@@ -47,16 +61,21 @@ struct vfe_output {
u8 wm_num;
u8 wm_idx[3];
- int active_buf;
struct camss_buffer *buf[2];
struct camss_buffer *last_buffer;
struct list_head pending_bufs;
unsigned int drop_update_idx;
+ union {
+ struct {
+ int active_buf;
+ int wait_sof;
+ } gen1;
+ };
enum vfe_output_state state;
unsigned int sequence;
- int wait_sof;
+
int wait_reg_update;
struct completion sof;
struct completion reg_update;
@@ -78,59 +97,19 @@ struct vfe_line {
struct vfe_device;
struct vfe_hw_ops {
- void (*hw_version_read)(struct vfe_device *vfe, struct device *dev);
- u16 (*get_ub_size)(u8 vfe_id);
+ void (*enable_irq_common)(struct vfe_device *vfe);
void (*global_reset)(struct vfe_device *vfe);
- void (*halt_request)(struct vfe_device *vfe);
- void (*halt_clear)(struct vfe_device *vfe);
- void (*wm_enable)(struct vfe_device *vfe, u8 wm, u8 enable);
- void (*wm_frame_based)(struct vfe_device *vfe, u8 wm, u8 enable);
- void (*wm_line_based)(struct vfe_device *vfe, u32 wm,
- struct v4l2_pix_format_mplane *pix,
- u8 plane, u32 enable);
- void (*wm_set_framedrop_period)(struct vfe_device *vfe, u8 wm, u8 per);
- void (*wm_set_framedrop_pattern)(struct vfe_device *vfe, u8 wm,
- u32 pattern);
- void (*wm_set_ub_cfg)(struct vfe_device *vfe, u8 wm, u16 offset,
- u16 depth);
- void (*bus_reload_wm)(struct vfe_device *vfe, u8 wm);
- void (*wm_set_ping_addr)(struct vfe_device *vfe, u8 wm, u32 addr);
- void (*wm_set_pong_addr)(struct vfe_device *vfe, u8 wm, u32 addr);
- int (*wm_get_ping_pong_status)(struct vfe_device *vfe, u8 wm);
- void (*bus_enable_wr_if)(struct vfe_device *vfe, u8 enable);
- void (*bus_connect_wm_to_rdi)(struct vfe_device *vfe, u8 wm,
- enum vfe_line_id id);
- void (*wm_set_subsample)(struct vfe_device *vfe, u8 wm);
- void (*bus_disconnect_wm_from_rdi)(struct vfe_device *vfe, u8 wm,
- enum vfe_line_id id);
- void (*set_xbar_cfg)(struct vfe_device *vfe, struct vfe_output *output,
- u8 enable);
- void (*set_rdi_cid)(struct vfe_device *vfe, enum vfe_line_id id,
- u8 cid);
- void (*set_realign_cfg)(struct vfe_device *vfe, struct vfe_line *line,
- u8 enable);
+ void (*hw_version_read)(struct vfe_device *vfe, struct device *dev);
+ irqreturn_t (*isr)(int irq, void *dev);
+ void (*isr_read)(struct vfe_device *vfe, u32 *value0, u32 *value1);
void (*reg_update)(struct vfe_device *vfe, enum vfe_line_id line_id);
void (*reg_update_clear)(struct vfe_device *vfe,
enum vfe_line_id line_id);
- void (*enable_irq_wm_line)(struct vfe_device *vfe, u8 wm,
- enum vfe_line_id line_id, u8 enable);
- void (*enable_irq_pix_line)(struct vfe_device *vfe, u8 comp,
- enum vfe_line_id line_id, u8 enable);
- void (*enable_irq_common)(struct vfe_device *vfe);
- void (*set_demux_cfg)(struct vfe_device *vfe, struct vfe_line *line);
- void (*set_scale_cfg)(struct vfe_device *vfe, struct vfe_line *line);
- void (*set_crop_cfg)(struct vfe_device *vfe, struct vfe_line *line);
- void (*set_clamp_cfg)(struct vfe_device *vfe);
- void (*set_qos)(struct vfe_device *vfe);
- void (*set_ds)(struct vfe_device *vfe);
- void (*set_cgc_override)(struct vfe_device *vfe, u8 wm, u8 enable);
- void (*set_camif_cfg)(struct vfe_device *vfe, struct vfe_line *line);
- void (*set_camif_cmd)(struct vfe_device *vfe, u8 enable);
- void (*set_module_cfg)(struct vfe_device *vfe, u8 enable);
- int (*camif_wait_for_stop)(struct vfe_device *vfe, struct device *dev);
- void (*isr_read)(struct vfe_device *vfe, u32 *value0, u32 *value1);
+ void (*subdev_init)(struct vfe_device *vfe);
+ int (*vfe_disable)(struct vfe_line *line);
+ int (*vfe_enable)(struct vfe_line *line);
+ int (*vfe_halt)(struct vfe_device *vfe);
void (*violation_read)(struct vfe_device *vfe);
- irqreturn_t (*isr)(int irq, void *dev);
};
struct vfe_isr_ops {
@@ -162,7 +141,9 @@ struct vfe_device {
u32 reg_update;
u8 was_streaming;
const struct vfe_hw_ops *ops;
+ const struct vfe_hw_ops_gen1 *ops_gen1;
struct vfe_isr_ops isr_ops;
+ struct camss_video_ops video_ops;
};
struct resources;
@@ -178,6 +159,38 @@ void msm_vfe_unregister_entities(struct vfe_device *vfe);
void msm_vfe_get_vfe_id(struct media_entity *entity, u8 *id);
void msm_vfe_get_vfe_line_id(struct media_entity *entity, enum vfe_line_id *id);
+
+/*
+ * vfe_buf_add_pending - Add output buffer to list of pending
+ * @output: VFE output
+ * @buffer: Video buffer
+ */
+void vfe_buf_add_pending(struct vfe_output *output, struct camss_buffer *buffer);
+
+struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output);
+
+/*
+ * vfe_disable - Disable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_disable(struct vfe_line *line);
+
+int vfe_flush_buffers(struct camss_video *vid, enum vb2_buffer_state state);
+
+/*
+ * vfe_isr_comp_done - Process composite image done interrupt
+ * @vfe: VFE Device
+ * @comp: Composite image id
+ */
+void vfe_isr_comp_done(struct vfe_device *vfe, u8 comp);
+
+void vfe_isr_reset_ack(struct vfe_device *vfe);
+int vfe_put_output(struct vfe_line *line);
+int vfe_release_wm(struct vfe_device *vfe, u8 wm);
+int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id);
+
extern const struct vfe_hw_ops vfe_ops_4_1;
extern const struct vfe_hw_ops vfe_ops_4_7;
extern const struct vfe_hw_ops vfe_ops_4_8;
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 06/22] media: camss: Add support for VFE hardware version Titan 170
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (3 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 05/22] media: camss: Refactor VFE HW version support Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 07/22] media: camss: Add missing format identifiers Robert Foss
` (15 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Add register definitions for version 170 of the Titan architecture
and implement support for the RDI output mode.
The RDI mode as opposed to the PIX output mode for the VFE unit does
not support any ISP functionality. This means essentially only
supporting dumping the output of the whatever the CSI decoder receives
from the sensor.
For example will a sensor outputting YUV pixel format frames, only
allow the VFE to dump those frames as they are received by the ISP
to memory through the RDI interface.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
Changes since v1:
- Andrey: Removed commented out chunk
- Remove left over WIP comments
drivers/media/platform/qcom/camss/Makefile | 1 +
.../media/platform/qcom/camss/camss-vfe-170.c | 805 ++++++++++++++++++
drivers/media/platform/qcom/camss/camss-vfe.c | 59 +-
drivers/media/platform/qcom/camss/camss-vfe.h | 25 +-
.../media/platform/qcom/camss/camss-video.c | 100 +++
drivers/media/platform/qcom/camss/camss.c | 61 ++
6 files changed, 1031 insertions(+), 20 deletions(-)
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-170.c
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index 940c0ae3e003..052c4f405fa3 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -11,6 +11,7 @@ qcom-camss-objs += \
camss-vfe-4-1.o \
camss-vfe-4-7.o \
camss-vfe-4-8.o \
+ camss-vfe-170.o \
camss-vfe-gen1.o \
camss-vfe.o \
camss-video.o \
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
new file mode 100644
index 000000000000..b8ac3a137c8a
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
@@ -0,0 +1,805 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-vfe-4-7.c
+ *
+ * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v4.7
+ *
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2018 Linaro Ltd.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#include "camss.h"
+#include "camss-vfe.h"
+
+#define VFE_HW_VERSION (0x000)
+
+#define VFE_GLOBAL_RESET_CMD (0x018)
+#define GLOBAL_RESET_CMD_CORE BIT(0)
+#define GLOBAL_RESET_CMD_CAMIF BIT(1)
+#define GLOBAL_RESET_CMD_BUS BIT(2)
+#define GLOBAL_RESET_CMD_BUS_BDG BIT(3)
+#define GLOBAL_RESET_CMD_REGISTER BIT(4)
+#define GLOBAL_RESET_CMD_PM BIT(5)
+#define GLOBAL_RESET_CMD_BUS_MISR BIT(6)
+#define GLOBAL_RESET_CMD_TESTGEN BIT(7)
+#define GLOBAL_RESET_CMD_DSP BIT(8)
+#define GLOBAL_RESET_CMD_IDLE_CGC BIT(9)
+
+#define VFE_CORE_CFG (0x050)
+#define CFG_PIXEL_PATTERN_YCBYCR (0x4)
+#define CFG_PIXEL_PATTERN_YCRYCB (0x5)
+#define CFG_PIXEL_PATTERN_CBYCRY (0x6)
+#define CFG_PIXEL_PATTERN_CRYCBY (0x7)
+#define CFG_COMPOSITE_REG_UPDATE_EN BIT(4)
+
+#define VFE_IRQ_CMD (0x058)
+#define CMD_GLOBAL_CLEAR BIT(0)
+
+#define VFE_IRQ_MASK_0 (0x05c)
+#define MASK_0_CAMIF_SOF BIT(0)
+#define MASK_0_CAMIF_EOF BIT(1)
+#define MASK_0_RDIn_REG_UPDATE(n) BIT((n) + 5)
+#define MASK_0_line_n_REG_UPDATE(n) \
+ ((n) == VFE_LINE_PIX ? \
+ BIT(4) : MASK_0_RDIn_REG_UPDATE(n))
+#define MASK_0_IMAGE_MASTER_n_PING_PONG(n) BIT((n) + 8)
+#define MASK_0_IMAGE_COMPOSITE_DONE_n(n) BIT((n) + 25)
+#define MASK_0_RESET_ACK BIT(31)
+
+#define VFE_IRQ_MASK_1 (0x060)
+#define MASK_1_CAMIF_ERROR BIT(0)
+#define MASK_1_VIOLATION BIT(7)
+#define MASK_1_BUS_BDG_HALT_ACK BIT(8)
+#define MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(n) BIT((n) + 9)
+#define MASK_1_RDIn_SOF(n) BIT((n) + 29)
+
+#define VFE_IRQ_CLEAR_0 (0x064)
+#define VFE_IRQ_CLEAR_1 (0x068)
+
+#define VFE_IRQ_STATUS_0 (0x06c)
+#define STATUS_0_CAMIF_SOF BIT(0)
+#define STATUS_0_RDIn_REG_UPDATE(n) BIT((n) + 5)
+#define STATUS_0_line_n_REG_UPDATE(n) \
+ ((n) == VFE_LINE_PIX ? \
+ BIT(4) : STATUS_0_RDIn_REG_UPDATE(n))
+#define STATUS_0_IMAGE_MASTER_n_PING_PONG(n) BIT((n) + 8)
+#define STATUS_0_IMAGE_COMPOSITE_DONE_n(n) BIT((n) + 25)
+#define STATUS_0_RESET_ACK BIT(31)
+
+#define VFE_IRQ_STATUS_1 (0x070)
+#define STATUS_1_VIOLATION BIT(7)
+#define STATUS_1_BUS_BDG_HALT_ACK BIT(8)
+#define STATUS_1_RDIn_SOF(n) BIT((n) + 27)
+
+#define VFE_VIOLATION_STATUS (0x07c)
+
+#define VFE_CAMIF_CMD (0x478)
+#define CMD_CLEAR_CAMIF_STATUS BIT(2)
+
+#define VFE_CAMIF_CFG (0x47c)
+#define CFG_VSYNC_SYNC_EDGE (0)
+#define VSYNC_ACTIVE_HIGH (0)
+#define VSYNC_ACTIVE_LOW (1)
+#define CFG_HSYNC_SYNC_EDGE (1)
+#define HSYNC_ACTIVE_HIGH (0)
+#define HSYNC_ACTIVE_LOW (1)
+#define CFG_VFE_SUBSAMPLE_ENABLE BIT(4)
+#define CFG_BUS_SUBSAMPLE_ENABLE BIT(5)
+#define CFG_VFE_OUTPUT_EN BIT(6)
+#define CFG_BUS_OUTPUT_EN BIT(7)
+#define CFG_BINNING_EN BIT(9)
+#define CFG_FRAME_BASED_EN BIT(10)
+#define CFG_RAW_CROP_EN BIT(22)
+
+// XXX different, don't exist in TITAN register docs
+#define VFE_0_CAMIF_FRAME_CFG 0x484
+#define VFE_0_CAMIF_WINDOW_WIDTH_CFG 0x488
+#define VFE_0_CAMIF_WINDOW_HEIGHT_CFG 0x48c
+#define VFE_0_CAMIF_SUBSAMPLE_CFG 0x490
+#define VFE_0_CAMIF_IRQ_FRAMEDROP_PATTERN 0x498
+#define VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN 0x49c
+#define VFE_0_CAMIF_STATUS 0x4a4
+#define VFE_0_CAMIF_STATUS_HALT BIT(31)
+#define CAMIF_TIMEOUT_SLEEP_US 1000
+#define CAMIF_TIMEOUT_ALL_US 1000000
+
+#define VFE_REG_UPDATE_CMD (0x4ac)
+#define REG_UPDATE_RDIn(n) BIT(1 + (n))
+#define REG_UPDATE_line_n(n) \
+ ((n) == VFE_LINE_PIX ? 1 : REG_UPDATE_RDIn(n))
+
+
+#define VFE_BUS_IRQ_MASK(n) (0x2044 + (n) * 4)
+#define VFE_BUS_IRQ_CLEAR(n) (0x2050 + (n) * 4)
+
+#define VFE_BUS_IRQ_STATUS(n) (0x205c + (n) * 4)
+#define STATUS0_COMP_RESET_DONE BIT(0)
+#define STATUS0_COMP_REG_UPDATE0_DONE BIT(1)
+#define STATUS0_COMP_REG_UPDATE1_DONE BIT(2)
+#define STATUS0_COMP_REG_UPDATE2_DONE BIT(3)
+#define STATUS0_COMP_REG_UPDATE3_DONE BIT(4)
+#define STATUS0_COMP_REG_UPDATE_DONE(n) BIT(n + 1)
+#define STATUS0_COMP0_BUF_DONE BIT(5)
+#define STATUS0_COMP1_BUF_DONE BIT(6)
+#define STATUS0_COMP2_BUF_DONE BIT(7)
+#define STATUS0_COMP3_BUF_DONE BIT(8)
+#define STATUS0_COMP4_BUF_DONE BIT(9)
+#define STATUS0_COMP5_BUF_DONE BIT(10)
+#define STATUS0_COMP_BUF_DONE(n) BIT(n + 5)
+#define STATUS0_COMP_ERROR BIT(11)
+#define STATUS0_COMP_OVERWRITE BIT(12)
+#define STATUS0_OVERFLOW BIT(13)
+#define STATUS0_VIOLATION BIT(14)
+/* WM_CLIENT_BUF_DONE defined for buffers 0:19 */
+#define STATUS1_WM_CLIENT_BUF_DONE(n) BIT(n)
+#define STATUS1_EARLY_DONE BIT(24)
+#define STATUS2_DUAL_COMP0_BUF_DONE BIT(0)
+#define STATUS2_DUAL_COMP1_BUF_DONE BIT(1)
+#define STATUS2_DUAL_COMP2_BUF_DONE BIT(2)
+#define STATUS2_DUAL_COMP3_BUF_DONE BIT(3)
+#define STATUS2_DUAL_COMP4_BUF_DONE BIT(4)
+#define STATUS2_DUAL_COMP5_BUF_DONE BIT(5)
+#define STATUS2_DUAL_COMP_BUF_DONE(n) BIT(n)
+#define STATUS2_DUAL_COMP_ERROR BIT(6)
+#define STATUS2_DUAL_COMP_OVERWRITE BIT(7)
+
+#define VFE_BUS_IRQ_CLEAR_GLOBAL (0x2068)
+
+#define VFE_BUS_WM_DEBUG_STATUS_CFG (0x226c)
+#define DEBUG_STATUS_CFG_STATUS0(n) BIT(n)
+#define DEBUG_STATUS_CFG_STATUS1(n) BIT(8+n)
+
+#define VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER (0x2080)
+
+#define VFE_BUS_WM_ADDR_SYNC_NO_SYNC (0x2084)
+#define BUS_VER2_MAX_CLIENTS (24)
+#define WM_ADDR_NO_SYNC_DEFAULT_VAL \
+ ((1 << BUS_VER2_MAX_CLIENTS) - 1)
+
+#define VFE_BUS_WM_CGC_OVERRIDE (0x200c)
+#define WM_CGC_OVERRIDE_ALL (0xFFFFF)
+
+#define VFE_BUS_WM_TEST_BUS_CTRL (0x211c)
+
+#define VFE_BUS_WM_STATUS0(n) (0x2200 + (n) * 0x100)
+#define VFE_BUS_WM_STATUS1(n) (0x2204 + (n) * 0x100)
+#define VFE_BUS_WM_CFG(n) (0x2208 + (n) * 0x100)
+#define WM_CFG_EN (0)
+#define WM_CFG_MODE (1)
+#define MODE_QCOM_PLAIN (0)
+#define MODE_MIPI_RAW (1)
+#define WM_CFG_VIRTUALFRAME (2)
+#define VFE_BUS_WM_HEADER_ADDR(n) (0x220c + (n) * 0x100)
+#define VFE_BUS_WM_HEADER_CFG(n) (0x2210 + (n) * 0x100)
+#define VFE_BUS_WM_IMAGE_ADDR(n) (0x2214 + (n) * 0x100)
+#define VFE_BUS_WM_IMAGE_ADDR_OFFSET(n) (0x2218 + (n) * 0x100)
+#define VFE_BUS_WM_BUFFER_WIDTH_CFG(n) (0x221c + (n) * 0x100)
+#define WM_BUFFER_DEFAULT_WIDTH (0xFF01)
+
+#define VFE_BUS_WM_BUFFER_HEIGHT_CFG(n) (0x2220 + (n) * 0x100)
+#define VFE_BUS_WM_PACKER_CFG(n) (0x2224 + (n) * 0x100)
+
+#define VFE_BUS_WM_STRIDE(n) (0x2228 + (n) * 0x100)
+#define WM_STRIDE_DEFAULT_STRIDE (0xFF01)
+
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n) (0x2248 + (n) * 0x100)
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n) (0x224c + (n) * 0x100)
+#define VFE_BUS_WM_FRAMEDROP_PERIOD(n) (0x2250 + (n) * 0x100)
+#define VFE_BUS_WM_FRAMEDROP_PATTERN(n) (0x2254 + (n) * 0x100)
+#define VFE_BUS_WM_FRAME_INC(n) (0x2258 + (n) * 0x100)
+#define VFE_BUS_WM_BURST_LIMIT(n) (0x225c + (n) * 0x100)
+
+
+static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
+{
+ u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
+
+ u32 gen = (hw_version >> 28) & 0xF;
+ u32 rev = (hw_version >> 16) & 0xFFF;
+ u32 step = hw_version & 0xFFFF;
+
+ dev_err(dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
+}
+
+static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
+{
+ u32 bits = readl_relaxed(vfe->base + reg);
+
+ writel_relaxed(bits & ~clr_bits, vfe->base + reg);
+}
+
+static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
+{
+ u32 bits = readl_relaxed(vfe->base + reg);
+
+ writel_relaxed(bits | set_bits, vfe->base + reg);
+}
+
+static void vfe_global_reset(struct vfe_device *vfe)
+{
+ u32 reset_bits = GLOBAL_RESET_CMD_IDLE_CGC |
+ GLOBAL_RESET_CMD_DSP |
+ GLOBAL_RESET_CMD_TESTGEN |
+ GLOBAL_RESET_CMD_BUS_MISR |
+ GLOBAL_RESET_CMD_PM |
+ GLOBAL_RESET_CMD_REGISTER |
+ GLOBAL_RESET_CMD_BUS_BDG |
+ GLOBAL_RESET_CMD_BUS |
+ GLOBAL_RESET_CMD_CAMIF |
+ GLOBAL_RESET_CMD_CORE;
+
+ reset_bits = 0x00003F9F;
+
+ writel_relaxed(BIT(31), vfe->base + VFE_IRQ_MASK_0);
+
+ /* Make sure IRQ mask has been written before resetting */
+ wmb();
+
+ writel_relaxed(reset_bits, vfe->base + VFE_GLOBAL_RESET_CMD);
+}
+
+static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
+{
+ u32 val;
+
+ /*Set Debug Registers*/
+ val = DEBUG_STATUS_CFG_STATUS0(1) |
+ DEBUG_STATUS_CFG_STATUS0(7);
+ writel_relaxed(val, vfe->base + VFE_BUS_WM_DEBUG_STATUS_CFG);
+
+ /* BUS_WM_INPUT_IF_ADDR_SYNC_FRAME_HEADER */
+ writel_relaxed(0, vfe->base + VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER);
+
+ /* no clock gating at bus input */
+ val = WM_CGC_OVERRIDE_ALL;
+ writel_relaxed(val, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
+
+ writel_relaxed(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
+
+ /* if addr_no_sync has default value then config the addr no sync reg */
+ val = WM_ADDR_NO_SYNC_DEFAULT_VAL;
+ writel_relaxed(val, vfe->base + VFE_BUS_WM_ADDR_SYNC_NO_SYNC);
+
+ writel_relaxed(0xf, vfe->base + VFE_BUS_WM_BURST_LIMIT(wm));
+
+ val = WM_BUFFER_DEFAULT_WIDTH;
+ writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_WIDTH_CFG(wm));
+
+ val = 0;
+ writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_HEIGHT_CFG(wm));
+
+ val = 0;
+ writel_relaxed(val, vfe->base + VFE_BUS_WM_PACKER_CFG(wm)); // XXX 1 for PLAIN8?
+
+ /* Configure stride for RDIs */
+ //val = pix->plane_fmt[0].bytesperline;
+ val = WM_STRIDE_DEFAULT_STRIDE;
+ writel_relaxed(val, vfe->base + VFE_BUS_WM_STRIDE(wm));
+
+ /* Enable WM */
+ val = 1 << WM_CFG_EN |
+ MODE_MIPI_RAW << WM_CFG_MODE;
+ writel_relaxed(val, vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)
+{
+ /* Disable WM */
+ writel_relaxed(0, vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
+ struct vfe_line *line)
+{
+ struct v4l2_pix_format_mplane *pix =
+ &line->video_out.active_fmt.fmt.pix_mp;
+ u32 stride = pix->plane_fmt[0].bytesperline;
+
+ writel_relaxed(addr, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
+ writel_relaxed(stride * pix->height, vfe->base + VFE_BUS_WM_FRAME_INC(wm));
+}
+
+static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ vfe->reg_update |= REG_UPDATE_line_n(line_id);
+
+ /* Enforce ordering between previous reg writes and reg update */
+ wmb();
+
+ writel_relaxed(vfe->reg_update, vfe->base + VFE_REG_UPDATE_CMD);
+
+ /* Enforce ordering between reg update and subsequent reg writes */
+ wmb();
+}
+
+static inline void vfe_reg_update_clear(struct vfe_device *vfe,
+ enum vfe_line_id line_id)
+{
+ vfe->reg_update &= ~REG_UPDATE_line_n(line_id);
+}
+
+static void vfe_enable_irq_common(struct vfe_device *vfe)
+{
+ vfe_reg_set(vfe, VFE_IRQ_MASK_0, ~0u);
+ vfe_reg_set(vfe, VFE_IRQ_MASK_1, ~0u);
+
+ writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(0));
+ writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(1));
+ writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(2));
+}
+
+static void vfe_isr_halt_ack(struct vfe_device *vfe)
+{
+ complete(&vfe->halt_complete);
+}
+
+static void vfe_isr_read(struct vfe_device *vfe, u32 *status0, u32 *status1)
+{
+ *status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
+ *status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
+
+ writel_relaxed(*status0, vfe->base + VFE_IRQ_CLEAR_0);
+ writel_relaxed(*status1, vfe->base + VFE_IRQ_CLEAR_1);
+
+ /* Enforce ordering between IRQ Clear and Global IRQ Clear */
+ wmb();
+ writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
+}
+
+static void vfe_violation_read(struct vfe_device *vfe)
+{
+ u32 violation = readl_relaxed(vfe->base + VFE_VIOLATION_STATUS);
+
+ pr_err_ratelimited("VFE: violation = 0x%08x\n", violation);
+}
+
+/*
+ * vfe_isr - VFE module interrupt handler
+ * @irq: Interrupt line
+ * @dev: VFE device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t vfe_isr(int irq, void *dev)
+{
+ struct vfe_device *vfe = dev;
+ u32 status0, status1, vfe_bus_status[3];
+ int i, wm;
+
+ status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
+ status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
+
+ writel_relaxed(status0, vfe->base + VFE_IRQ_CLEAR_0);
+ writel_relaxed(status1, vfe->base + VFE_IRQ_CLEAR_1);
+
+ for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++) {
+ vfe_bus_status[i] = readl_relaxed(vfe->base + VFE_BUS_IRQ_STATUS(i));
+ writel_relaxed(vfe_bus_status[i], vfe->base + VFE_BUS_IRQ_CLEAR(i));
+ }
+
+ /* Enforce ordering between IRQ reading and interpretation */
+ wmb();
+
+ writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
+ writel_relaxed(1, vfe->base + VFE_BUS_IRQ_CLEAR_GLOBAL);
+
+ if (status0 & STATUS_0_RESET_ACK)
+ vfe->isr_ops.reset_ack(vfe);
+
+ for (i = VFE_LINE_RDI0; i <= VFE_LINE_PIX; i++)
+ if (status0 & STATUS_0_line_n_REG_UPDATE(i))
+ vfe->isr_ops.reg_update(vfe, i);
+
+ for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
+ if (status0 & STATUS_1_RDIn_SOF(i))
+ vfe->isr_ops.sof(vfe, i);
+
+ for (i = 0; i < MSM_VFE_COMPOSITE_IRQ_NUM; i++)
+ if (vfe_bus_status[0] & STATUS0_COMP_BUF_DONE(i))
+ vfe->isr_ops.comp_done(vfe, i);
+
+ for (wm = 0; wm < MSM_VFE_IMAGE_MASTERS_NUM; wm++)
+ if (status0 & BIT(9))
+ if (vfe_bus_status[1] & STATUS1_WM_CLIENT_BUF_DONE(wm))
+ vfe->isr_ops.wm_done(vfe, wm);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * vfe_halt - Trigger halt on VFE module and wait to complete
+ * @vfe: VFE device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_halt(struct vfe_device *vfe)
+{
+ unsigned long time;
+
+ return 0;
+
+ reinit_completion(&vfe->halt_complete);
+
+ time = wait_for_completion_timeout(&vfe->halt_complete,
+ msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));
+ if (!time) {
+ dev_err(vfe->camss->dev, "VFE halt timeout\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int vfe_get_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output;
+ struct v4l2_format *f = &line->video_out.active_fmt;
+ unsigned long flags;
+ int i;
+ int wm_idx;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ output = &line->output;
+ if (output->state != VFE_OUTPUT_OFF) {
+ dev_err(vfe->camss->dev, "Output is running\n");
+ goto error;
+ }
+
+ switch (f->fmt.pix_mp.pixelformat) {
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ output->wm_num = 2;
+ break;
+ default:
+ output->wm_num = 1;
+ break;
+ }
+
+ for (i = 0; i < output->wm_num; i++) {
+ wm_idx = vfe_reserve_wm(vfe, line->id);
+ if (wm_idx < 0) {
+ dev_err(vfe->camss->dev, "Can not reserve wm\n");
+ goto error_get_wm;
+ }
+ output->wm_idx[i] = wm_idx;
+ }
+
+ output->drop_update_idx = 0;
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+
+error_get_wm:
+ for (i--; i >= 0; i--)
+ vfe_release_wm(vfe, output->wm_idx[i]);
+ output->state = VFE_OUTPUT_OFF;
+error:
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return -EINVAL;
+}
+
+static int vfe_enable_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output = &line->output;
+ const struct vfe_hw_ops *ops = vfe->ops;
+ struct media_entity *sensor;
+ unsigned long flags;
+ unsigned int frame_skip = 0;
+ unsigned int i;
+
+ sensor = camss_find_sensor(&line->subdev.entity);
+ if (sensor) {
+ struct v4l2_subdev *subdev =
+ media_entity_to_v4l2_subdev(sensor);
+
+ v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
+ /* Max frame skip is 29 frames */
+ if (frame_skip > VFE_FRAME_DROP_VAL - 1)
+ frame_skip = VFE_FRAME_DROP_VAL - 1;
+ }
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ ops->reg_update_clear(vfe, line->id);
+
+ if (output->state != VFE_OUTPUT_OFF) {
+ dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",
+ output->state);
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+ return -EINVAL;
+ }
+
+ WARN_ON(output->gen2.active_num);
+
+ output->state = VFE_OUTPUT_ON;
+
+ output->sequence = 0;
+ output->wait_reg_update = 0;
+ reinit_completion(&output->reg_update);
+
+ if (line->id != VFE_LINE_PIX)
+ vfe_wm_start(vfe, output->wm_idx[0], line);
+
+ for (i = 0; i < 2; i++) {
+ output->buf[i] = vfe_buf_get_pending(output);
+ if (!output->buf[i])
+ break;
+ output->gen2.active_num++;
+ vfe_wm_update(vfe, output->wm_idx[0], output->buf[i]->addr[0], line);
+ }
+
+ ops->reg_update(vfe, line->id);
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+}
+
+static int vfe_disable_output(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output = &line->output;
+ unsigned long flags;
+ unsigned int i;
+ bool done;
+ int timeout = 0;
+
+ do {
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ done = !output->gen2.active_num;
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+ usleep_range(10000, 20000);
+
+ if (timeout++ == 100) {
+ dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
+ vfe_reset(vfe);
+ output->gen2.active_num = 0;
+ return 0;
+ }
+ } while (!done);
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ for (i = 0; i < output->wm_num; i++)
+ vfe_wm_stop(vfe, output->wm_idx[i]);
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+}
+
+/*
+ * vfe_enable - Enable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_enable(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+ int ret;
+
+ mutex_lock(&vfe->stream_lock);
+
+ if (!vfe->stream_count)
+ vfe_enable_irq_common(vfe);
+
+ vfe->stream_count++;
+
+ mutex_unlock(&vfe->stream_lock);
+
+ ret = vfe_get_output(line);
+ if (ret < 0)
+ goto error_get_output;
+
+ ret = vfe_enable_output(line);
+ if (ret < 0)
+ goto error_enable_output;
+
+ vfe->was_streaming = 1;
+
+ return 0;
+
+
+error_enable_output:
+ vfe_put_output(line);
+
+error_get_output:
+ mutex_lock(&vfe->stream_lock);
+
+ vfe->stream_count--;
+
+ mutex_unlock(&vfe->stream_lock);
+
+ return ret;
+}
+
+/*
+ * vfe_disable - Disable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_disable(struct vfe_line *line)
+{
+ struct vfe_device *vfe = to_vfe(line);
+
+ vfe_disable_output(line);
+
+ vfe_put_output(line);
+
+ mutex_lock(&vfe->stream_lock);
+
+ vfe->stream_count--;
+
+ mutex_unlock(&vfe->stream_lock);
+
+ return 0;
+}
+
+/*
+ * vfe_isr_sof - Process start of frame interrupt
+ * @vfe: VFE Device
+ * @line_id: VFE line
+ */
+static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+
+}
+
+/*
+ * vfe_isr_reg_update - Process reg update interrupt
+ * @vfe: VFE Device
+ * @line_id: VFE line
+ */
+static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ struct vfe_output *output;
+ unsigned long flags;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+ vfe->ops->reg_update_clear(vfe, line_id);
+
+ output = &vfe->line[line_id].output;
+
+ if (output->wait_reg_update) {
+ output->wait_reg_update = 0;
+ complete(&output->reg_update);
+ }
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
+/*
+ * vfe_isr_wm_done - Process write master done interrupt
+ * @vfe: VFE Device
+ * @wm: Write master id
+ */
+static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
+{
+ struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];
+ struct camss_buffer *ready_buf;
+ struct vfe_output *output;
+ unsigned long flags;
+ u32 index;
+ u64 ts = ktime_get_ns();
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
+ dev_err_ratelimited(vfe->camss->dev,
+ "Received wm done for unmapped index\n");
+ goto out_unlock;
+ }
+ output = &vfe->line[vfe->wm_output_map[wm]].output;
+
+ ready_buf = output->buf[0];
+ if (!ready_buf) {
+ dev_err_ratelimited(vfe->camss->dev,
+ "Missing ready buf %d!\n", output->state);
+ goto out_unlock;
+ }
+
+ ready_buf->vb.vb2_buf.timestamp = ts;
+ ready_buf->vb.sequence = output->sequence++;
+
+ index = 0;
+ output->buf[0] = output->buf[1];
+ if (output->buf[0])
+ index = 1;
+
+ output->buf[index] = vfe_buf_get_pending(output);
+
+ if (output->buf[index])
+ vfe_wm_update(vfe, output->wm_idx[0], output->buf[index]->addr[0], line);
+ else
+ output->gen2.active_num--;
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+
+ return;
+
+out_unlock:
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
+/*
+ * vfe_queue_buffer - Add empty buffer
+ * @vid: Video device structure
+ * @buf: Buffer to be enqueued
+ *
+ * Add an empty buffer - depending on the current number of buffers it will be
+ * put in pending buffer queue or directly given to the hardware to be filled.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_queue_buffer(struct camss_video *vid,
+ struct camss_buffer *buf)
+{
+ struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
+ struct vfe_device *vfe = to_vfe(line);
+ struct vfe_output *output;
+ unsigned long flags;
+
+ output = &line->output;
+
+ spin_lock_irqsave(&vfe->output_lock, flags);
+
+ if (output->state == VFE_OUTPUT_ON && output->gen2.active_num < 2) {
+ output->buf[output->gen2.active_num++] = buf;
+ vfe_wm_update(vfe, output->wm_idx[0], buf->addr[0], line);
+ } else {
+ vfe_buf_add_pending(output, buf);
+ }
+
+ spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+ return 0;
+}
+
+const struct vfe_isr_ops vfe_isr_ops_170 = {
+ .reset_ack = vfe_isr_reset_ack,
+ .halt_ack = vfe_isr_halt_ack,
+ .reg_update = vfe_isr_reg_update,
+ .sof = vfe_isr_sof,
+ .comp_done = vfe_isr_comp_done,
+ .wm_done = vfe_isr_wm_done,
+};
+
+static const struct camss_video_ops vfe_video_ops_170 = {
+ .queue_buffer = vfe_queue_buffer,
+ .flush_buffers = vfe_flush_buffers,
+};
+
+static void vfe_subdev_init(struct vfe_device *vfe)
+{
+ vfe->isr_ops = vfe_isr_ops_170;
+ vfe->video_ops = vfe_video_ops_170;
+}
+
+const struct vfe_hw_ops vfe_ops_170 = {
+ .global_reset = vfe_global_reset,
+ .hw_version_read = vfe_hw_version_read,
+ .isr_read = vfe_isr_read,
+ .isr = vfe_isr,
+ .reg_update_clear = vfe_reg_update_clear,
+ .reg_update = vfe_reg_update,
+ .subdev_init = vfe_subdev_init,
+ .vfe_disable = vfe_disable,
+ .vfe_enable = vfe_enable,
+ .vfe_halt = vfe_halt,
+ .violation_read = vfe_violation_read,
+};
+
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 75b4e866c01b..fa9629835e98 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -96,6 +96,39 @@ static const struct vfe_format formats_pix_8x96[] = {
{ MEDIA_BUS_FMT_YVYU8_2X8, 8 },
};
+static const struct vfe_format formats_rdi_845[] = {
+ { MEDIA_BUS_FMT_UYVY8_2X8, 8 },
+ { MEDIA_BUS_FMT_VYUY8_2X8, 8 },
+ { MEDIA_BUS_FMT_YUYV8_2X8, 8 },
+ { MEDIA_BUS_FMT_YVYU8_2X8, 8 },
+ { MEDIA_BUS_FMT_SBGGR8_1X8, 8 },
+ { MEDIA_BUS_FMT_SGBRG8_1X8, 8 },
+ { MEDIA_BUS_FMT_SGRBG8_1X8, 8 },
+ { MEDIA_BUS_FMT_SRGGB8_1X8, 8 },
+ { MEDIA_BUS_FMT_SBGGR10_1X10, 10 },
+ { MEDIA_BUS_FMT_SGBRG10_1X10, 10 },
+ { MEDIA_BUS_FMT_SGRBG10_1X10, 10 },
+ { MEDIA_BUS_FMT_SRGGB10_1X10, 10 },
+ { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, 16 },
+ { MEDIA_BUS_FMT_SBGGR12_1X12, 12 },
+ { MEDIA_BUS_FMT_SGBRG12_1X12, 12 },
+ { MEDIA_BUS_FMT_SGRBG12_1X12, 12 },
+ { MEDIA_BUS_FMT_SRGGB12_1X12, 12 },
+ { MEDIA_BUS_FMT_SBGGR14_1X14, 14 },
+ { MEDIA_BUS_FMT_SGBRG14_1X14, 14 },
+ { MEDIA_BUS_FMT_SGRBG14_1X14, 14 },
+ { MEDIA_BUS_FMT_SRGGB14_1X14, 14 },
+ { MEDIA_BUS_FMT_Y10_1X10, 10 },
+ { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, 16 },
+};
+
+static const struct vfe_format formats_pix_845[] = {
+ { MEDIA_BUS_FMT_UYVY8_2X8, 8 },
+ { MEDIA_BUS_FMT_VYUY8_2X8, 8 },
+ { MEDIA_BUS_FMT_YUYV8_2X8, 8 },
+ { MEDIA_BUS_FMT_YVYU8_2X8, 8 },
+};
+
/*
* vfe_get_bpp - map media bus format to bits per pixel
* @formats: supported media bus formats array
@@ -192,7 +225,8 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
return sink_code;
}
else if (vfe->camss->version == CAMSS_8x96 ||
- vfe->camss->version == CAMSS_660)
+ vfe->camss->version == CAMSS_660 ||
+ vfe->camss->version == CAMSS_845)
switch (sink_code) {
case MEDIA_BUS_FMT_YUYV8_2X8:
{
@@ -256,13 +290,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
return 0;
}
-/*
- * vfe_reset - Trigger reset on VFE module and wait to complete
- * @vfe: VFE device
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_reset(struct vfe_device *vfe)
+int vfe_reset(struct vfe_device *vfe)
{
unsigned long time;
@@ -429,7 +457,8 @@ static int vfe_set_clock_rates(struct vfe_device *vfe)
struct camss_clock *clock = &vfe->clock[i];
if (!strcmp(clock->name, "vfe0") ||
- !strcmp(clock->name, "vfe1")) {
+ !strcmp(clock->name, "vfe1") ||
+ !strcmp(clock->name, "vfe_lite")) {
u64 min_rate = 0;
long rate;
@@ -1268,6 +1297,10 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
case CAMSS_660:
vfe->ops = &vfe_ops_4_8;
break;
+
+ case CAMSS_845:
+ vfe->ops = &vfe_ops_170;
+ break;
default:
return -EINVAL;
}
@@ -1379,6 +1412,14 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
l->formats = formats_rdi_8x96;
l->nformats = ARRAY_SIZE(formats_rdi_8x96);
}
+ } else if (camss->version == CAMSS_845) {
+ if (i == VFE_LINE_PIX) {
+ l->formats = formats_pix_845;
+ l->nformats = ARRAY_SIZE(formats_pix_845);
+ } else {
+ l->formats = formats_rdi_845;
+ l->nformats = ARRAY_SIZE(formats_rdi_845);
+ }
} else {
return -EINVAL;
}
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index 8629c833f130..a0b618c9cec8 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -19,7 +19,6 @@
#include "camss-video.h"
#include "camss-vfe-gen1.h"
-
#define MSM_VFE_PAD_SINK 0
#define MSM_VFE_PAD_SRC 1
#define MSM_VFE_PADS_NUM 2
@@ -39,14 +38,14 @@
#define to_vfe(ptr_line) \
container_of(vfe_line_array(ptr_line), struct vfe_device, line)
-
enum vfe_output_state {
VFE_OUTPUT_OFF,
VFE_OUTPUT_RESERVED,
VFE_OUTPUT_SINGLE,
VFE_OUTPUT_CONTINUOUS,
VFE_OUTPUT_IDLE,
- VFE_OUTPUT_STOPPING
+ VFE_OUTPUT_STOPPING,
+ VFE_OUTPUT_ON,
};
enum vfe_line_id {
@@ -72,6 +71,9 @@ struct vfe_output {
int active_buf;
int wait_sof;
} gen1;
+ struct {
+ int active_num;
+ } gen2;
};
enum vfe_output_state state;
unsigned int sequence;
@@ -169,14 +171,6 @@ void vfe_buf_add_pending(struct vfe_output *output, struct camss_buffer *buffer)
struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output);
-/*
- * vfe_disable - Disable streaming on VFE line
- * @line: VFE line
- *
- * Return 0 on success or a negative error code otherwise
- */
-int vfe_disable(struct vfe_line *line);
-
int vfe_flush_buffers(struct camss_video *vid, enum vb2_buffer_state state);
/*
@@ -191,8 +185,17 @@ int vfe_put_output(struct vfe_line *line);
int vfe_release_wm(struct vfe_device *vfe, u8 wm);
int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id);
+/*
+ * vfe_reset - Trigger reset on VFE module and wait to complete
+ * @vfe: VFE device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_reset(struct vfe_device *vfe);
+
extern const struct vfe_hw_ops vfe_ops_4_1;
extern const struct vfe_hw_ops vfe_ops_4_7;
extern const struct vfe_hw_ops vfe_ops_4_8;
+extern const struct vfe_hw_ops vfe_ops_170;
#endif /* QC_MSM_CAMSS_VFE_H */
diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
index 97cea7c4d769..9c86edd81737 100644
--- a/drivers/media/platform/qcom/camss/camss-video.c
+++ b/drivers/media/platform/qcom/camss/camss-video.c
@@ -133,6 +133,55 @@ static const struct camss_format_info formats_rdi_8x96[] = {
{ { 1, 1 } }, { { 1, 1 } }, { 16 } },
};
+static const struct camss_format_info formats_rdi_845[] = {
+ { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_UYVY, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_VYUY, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_YUYV, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_YVYU, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_PIX_FMT_SBGGR8, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 8 } },
+ { MEDIA_BUS_FMT_SGBRG8_1X8, V4L2_PIX_FMT_SGBRG8, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 8 } },
+ { MEDIA_BUS_FMT_SGRBG8_1X8, V4L2_PIX_FMT_SGRBG8, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 8 } },
+ { MEDIA_BUS_FMT_SRGGB8_1X8, V4L2_PIX_FMT_SRGGB8, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 8 } },
+ { MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+ { MEDIA_BUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+ { MEDIA_BUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+ { MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+ { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_PIX_FMT_SBGGR10, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 12 } },
+ { MEDIA_BUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 12 } },
+ { MEDIA_BUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 12 } },
+ { MEDIA_BUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 12 } },
+ { MEDIA_BUS_FMT_SBGGR14_1X14, V4L2_PIX_FMT_SBGGR14P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 14 } },
+ { MEDIA_BUS_FMT_SGBRG14_1X14, V4L2_PIX_FMT_SGBRG14P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 14 } },
+ { MEDIA_BUS_FMT_SGRBG14_1X14, V4L2_PIX_FMT_SGRBG14P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 14 } },
+ { MEDIA_BUS_FMT_SRGGB14_1X14, V4L2_PIX_FMT_SRGGB14P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 14 } },
+ { MEDIA_BUS_FMT_Y10_1X10, V4L2_PIX_FMT_Y10P, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+ { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, V4L2_PIX_FMT_Y10, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+};
+
static const struct camss_format_info formats_pix_8x16[] = {
{ MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV12, 1,
{ { 1, 1 } }, { { 2, 3 } }, { 8 } },
@@ -211,6 +260,49 @@ static const struct camss_format_info formats_pix_8x96[] = {
{ { 1, 1 } }, { { 1, 1 } }, { 16 } },
};
+static const struct camss_format_info formats_pix_845[] = {
+ { MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV12, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_YVYU8_1_5X8, V4L2_PIX_FMT_NV12, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_UYVY8_1_5X8, V4L2_PIX_FMT_NV12, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_VYUY8_1_5X8, V4L2_PIX_FMT_NV12, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV21, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_YVYU8_1_5X8, V4L2_PIX_FMT_NV21, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_UYVY8_1_5X8, V4L2_PIX_FMT_NV21, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_VYUY8_1_5X8, V4L2_PIX_FMT_NV21, 1,
+ { { 1, 1 } }, { { 2, 3 } }, { 8 } },
+ { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_NV16, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_NV16, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_NV16, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_NV16, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_NV61, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_NV61, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_NV61, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_NV61, 1,
+ { { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_UYVY, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_VYUY, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_YUYV, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_YVYU, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+};
+
/* -----------------------------------------------------------------------------
* Helper functions
*/
@@ -960,6 +1052,14 @@ int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
video->formats = formats_rdi_8x96;
video->nformats = ARRAY_SIZE(formats_rdi_8x96);
}
+ } else if (video->camss->version == CAMSS_845) {
+ if (is_pix) {
+ video->formats = formats_pix_845;
+ video->nformats = ARRAY_SIZE(formats_pix_845);
+ } else {
+ video->formats = formats_rdi_845;
+ video->nformats = ARRAY_SIZE(formats_rdi_845);
+ }
} else {
ret = -EINVAL;
goto error_video_register;
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index b966de344b5b..d710073e47a3 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -465,6 +465,67 @@ static const struct resources vfe_res_660[] = {
}
};
+static const struct resources vfe_res_845[] = {
+ /* VFE0 */
+ {
+ .regulator = { NULL },
+ .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
+ "soc_ahb", "vfe0", "vfe0_axi",
+ "vfe0_src", "csi0",
+ "csi0_src"},
+ .clock_rate = { { 0 },
+ { 0 },
+ { 80000000 },
+ { 0 },
+ { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
+ { 0 },
+ { 320000000 },
+ { 19200000, 75000000, 384000000, 538666667 },
+ { 384000000 } },
+ .reg = { "vfe0" },
+ .interrupt = { "vfe0" }
+ },
+
+ /* VFE1 */
+ {
+ .regulator = { NULL },
+ .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
+ "soc_ahb", "vfe1", "vfe1_axi",
+ "vfe1_src", "csi1",
+ "csi1_src"},
+ .clock_rate = { { 0 },
+ { 0 },
+ { 80000000 },
+ { 0 },
+ { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
+ { 0 },
+ { 320000000 },
+ { 19200000, 75000000, 384000000, 538666667 },
+ { 384000000 } },
+ .reg = { "vfe1" },
+ .interrupt = { "vfe1" }
+ },
+
+ /* VFE-lite */
+ {
+ .regulator = { NULL },
+ .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
+ "soc_ahb", "vfe_lite",
+ "vfe_lite_src", "csi2",
+ "csi2_src"},
+ .clock_rate = { { 0 },
+ { 0 },
+ { 80000000 },
+ { 0 },
+ { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
+ { 320000000 },
+ { 19200000, 75000000, 384000000, 538666667 },
+ { 384000000 } },
+ .reg = { "vfe_lite" },
+ .interrupt = { "vfe_lite" }
+ }
+};
+
/*
* camss_add_clock_margin - Add margin to clock frequency rate
* @rate: Clock frequency rate
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 07/22] media: camss: Add missing format identifiers
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (4 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 06/22] media: camss: Add support for VFE hardware version Titan 170 Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 08/22] media: camss: Refactor CSID HW version support Robert Foss
` (14 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
The CSI-2 spec defines the following types:
- Data Type - Often abbreviated DT
- Decode Format - Often abbreviated as DF
- Encode Format
These definitions are as far as I can tell complete for CSI-2.
Additionally the Qualcomm internal type describing Plain Formats
has been added. Plain formats describe the size of the pixels
written by the RDI units to memory. PLAIN8 for example has the size
8 bits, and PLAIN32 32 bits. The appropriate Plain Format is
determined by the Decode Format used. The smallest Plain Format
that is able to contain a pixel of the used Decode Format is the
appropriate one to use.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
.../media/platform/qcom/camss/camss-csid.h | 50 +++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/drivers/media/platform/qcom/camss/camss-csid.h b/drivers/media/platform/qcom/camss/camss-csid.h
index 1824b3745e10..02fc34ee8a41 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.h
+++ b/drivers/media/platform/qcom/camss/camss-csid.h
@@ -21,6 +21,56 @@
#define MSM_CSID_PAD_SRC 1
#define MSM_CSID_PADS_NUM 2
+#define DATA_TYPE_EMBEDDED_DATA_8BIT 0x12
+#define DATA_TYPE_YUV420_8BIT 0x18
+#define DATA_TYPE_YUV420_10BIT 0x19
+#define DATA_TYPE_YUV420_8BIT_LEGACY 0x1a
+#define DATA_TYPE_YUV420_8BIT_SHIFTED 0x1c /* Chroma Shifted Pixel Sampling */
+#define DATA_TYPE_YUV420_10BIT_SHIFTED 0x1d /* Chroma Shifted Pixel Sampling */
+#define DATA_TYPE_YUV422_8BIT 0x1e
+#define DATA_TYPE_YUV422_10BIT 0x1f
+#define DATA_TYPE_RGB444 0x20
+#define DATA_TYPE_RGB555 0x21
+#define DATA_TYPE_RGB565 0x22
+#define DATA_TYPE_RGB666 0x23
+#define DATA_TYPE_RGB888 0x24
+#define DATA_TYPE_RAW_24BIT 0x27
+#define DATA_TYPE_RAW_6BIT 0x28
+#define DATA_TYPE_RAW_7BIT 0x29
+#define DATA_TYPE_RAW_8BIT 0x2a
+#define DATA_TYPE_RAW_10BIT 0x2b
+#define DATA_TYPE_RAW_12BIT 0x2c
+#define DATA_TYPE_RAW_14BIT 0x2d
+#define DATA_TYPE_RAW_16BIT 0x2e
+#define DATA_TYPE_RAW_20BIT 0x2f
+
+#define DECODE_FORMAT_UNCOMPRESSED_6_BIT 0x0
+#define DECODE_FORMAT_UNCOMPRESSED_8_BIT 0x1
+#define DECODE_FORMAT_UNCOMPRESSED_10_BIT 0x2
+#define DECODE_FORMAT_UNCOMPRESSED_12_BIT 0x3
+#define DECODE_FORMAT_UNCOMPRESSED_14_BIT 0x4
+#define DECODE_FORMAT_UNCOMPRESSED_16_BIT 0x5
+#define DECODE_FORMAT_UNCOMPRESSED_20_BIT 0x6
+#define DECODE_FORMAT_DPCM_10_6_10 0x7
+#define DECODE_FORMAT_DPCM_10_8_10 0x8
+#define DECODE_FORMAT_DPCM_12_6_12 0x9
+#define DECODE_FORMAT_DPCM_12_8_12 0xA
+#define DECODE_FORMAT_DPCM_14_8_14 0xB
+#define DECODE_FORMAT_DPCM_14_10_14 0xC
+#define DECODE_FORMAT_USER_DEFINED 0xE
+#define DECODE_FORMAT_PAYLOAD_ONLY 0xF
+
+#define ENCODE_FORMAT_RAW_8_BIT 0x1
+#define ENCODE_FORMAT_RAW_10_BIT 0x2
+#define ENCODE_FORMAT_RAW_12_BIT 0x3
+#define ENCODE_FORMAT_RAW_14_BIT 0x4
+#define ENCODE_FORMAT_RAW_16_BIT 0x5
+
+#define PLAIN_FORMAT_PLAIN8 0x0 /* supports DPCM, UNCOMPRESSED_6/8_BIT */
+#define PLAIN_FORMAT_PLAIN16 0x1 /* supports DPCM, UNCOMPRESSED_10/16_BIT */
+#define PLAIN_FORMAT_PLAIN32 0x2 /* supports UNCOMPRESSED_20_BIT */
+
+
enum csid_payload_mode {
CSID_PAYLOAD_MODE_INCREMENTING = 0,
CSID_PAYLOAD_MODE_ALTERNATING_55_AA = 1,
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 08/22] media: camss: Refactor CSID HW version support
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (5 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 07/22] media: camss: Add missing format identifiers Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 09/22] media: camss: Add support for CSID hardware version Titan 170 Robert Foss
` (13 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
In order to support Qualcomm ISP hardware architectures that diverge
from older architectures, the CSID subdevice drivers needs to be refactored
to better abstract the different ISP hardware architectures.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
Changes since v1
- kernel test robot: Add missing include, interrupt.h
drivers/media/platform/qcom/camss/Makefile | 2 +
.../platform/qcom/camss/camss-csid-4-1.c | 338 ++++++++++
.../platform/qcom/camss/camss-csid-4-7.c | 406 ++++++++++++
.../media/platform/qcom/camss/camss-csid.c | 616 +-----------------
.../media/platform/qcom/camss/camss-csid.h | 126 +++-
5 files changed, 898 insertions(+), 590 deletions(-)
create mode 100644 drivers/media/platform/qcom/camss/camss-csid-4-1.c
create mode 100644 drivers/media/platform/qcom/camss/camss-csid-4-7.c
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index 052c4f405fa3..cff388b653ba 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -4,6 +4,8 @@
qcom-camss-objs += \
camss.o \
camss-csid.o \
+ camss-csid-4-1.o \
+ camss-csid-4-7.o \
camss-csiphy-2ph-1-0.o \
camss-csiphy-3ph-1-0.o \
camss-csiphy.o \
diff --git a/drivers/media/platform/qcom/camss/camss-csid-4-1.c b/drivers/media/platform/qcom/camss/camss-csid-4-1.c
new file mode 100644
index 000000000000..84b415137555
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-csid-4-1.c
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-csid-4-1.c
+ *
+ * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module
+ *
+ * Copyright (C) 2020 Linaro Ltd.
+ */
+ #include <linux/completion.h>
+ #include <linux/interrupt.h>
+ #include <linux/io.h>
+ #include <linux/kernel.h>
+ #include <linux/of.h>
+
+#include "camss-csid.h"
+#include "camss.h"
+
+#define CAMSS_CSID_HW_VERSION 0x0
+#define CAMSS_CSID_CORE_CTRL_0 0x004
+#define CAMSS_CSID_CORE_CTRL_1 0x008
+#define CAMSS_CSID_RST_CMD 0x00c
+#define CAMSS_CSID_CID_LUT_VC_n(n) (0x010 + 0x4 * (n))
+#define CAMSS_CSID_CID_n_CFG(n) (0x020 + 0x4 * (n))
+#define CAMSS_CSID_CID_n_CFG_ISPIF_EN BIT(0)
+#define CAMSS_CSID_CID_n_CFG_RDI_EN BIT(1)
+#define CAMSS_CSID_CID_n_CFG_DECODE_FORMAT_SHIFT 4
+#define CAMSS_CSID_CID_n_CFG_PLAIN_FORMAT_8 (0 << 8)
+#define CAMSS_CSID_CID_n_CFG_PLAIN_FORMAT_16 (1 << 8)
+#define CAMSS_CSID_CID_n_CFG_PLAIN_ALIGNMENT_LSB (0 << 9)
+#define CAMSS_CSID_CID_n_CFG_PLAIN_ALIGNMENT_MSB (1 << 9)
+#define CAMSS_CSID_CID_n_CFG_RDI_MODE_RAW_DUMP (0 << 10)
+#define CAMSS_CSID_CID_n_CFG_RDI_MODE_PLAIN_PACKING (1 << 10)
+#define CAMSS_CSID_IRQ_CLEAR_CMD 0x060
+#define CAMSS_CSID_IRQ_MASK 0x064
+#define CAMSS_CSID_IRQ_STATUS 0x068
+#define CAMSS_CSID_TG_CTRL 0x0a0
+#define CAMSS_CSID_TG_CTRL_DISABLE 0xa06436
+#define CAMSS_CSID_TG_CTRL_ENABLE 0xa06437
+#define CAMSS_CSID_TG_VC_CFG 0x0a4
+#define CAMSS_CSID_TG_VC_CFG_H_BLANKING 0x3ff
+#define CAMSS_CSID_TG_VC_CFG_V_BLANKING 0x7f
+#define CAMSS_CSID_TG_DT_n_CGG_0(n) (0x0ac + 0xc * (n))
+#define CAMSS_CSID_TG_DT_n_CGG_1(n) (0x0b0 + 0xc * (n))
+#define CAMSS_CSID_TG_DT_n_CGG_2(n) (0x0b4 + 0xc * (n))
+
+
+enum csid_testgen_pattern {
+ TESTGEN_PATTERN_INCREMENTING = 0,
+ TESTGEN_PATTERN_ALTERNATING_55_AA = 1,
+ TESTGEN_PATTERN_ALL_ZEROES = 2,
+ TESTGEN_PATTERN_ALL_ONES = 3,
+ TESTGEN_PATTERN_RANDOM = 4,
+ TESTGEN_PATTERN_USER_SPECIFIED = 5,
+};
+
+static const struct csid_format csid_formats[] = {
+ {
+ MEDIA_BUS_FMT_UYVY8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_VYUY8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_YUYV8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_YVYU8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_Y10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+};
+
+static void csid_configure_stream(struct csid_device *csid, u8 enable)
+{
+ struct csid_testgen_config *tg = &csid->testgen;
+ u32 val;
+
+ if (enable) {
+ struct v4l2_mbus_framefmt *input_format;
+ const struct csid_format *format;
+ u8 vc = 0; /* Virtual Channel 0 */
+ u8 cid = vc * 4; /* id of Virtual Channel and Data Type set */
+ u8 dt_shift;
+
+ if (tg->enabled) {
+ /* Config Test Generator */
+ u32 num_lines, num_bytes_per_line;
+
+ input_format = &csid->fmt[MSM_CSID_PAD_SRC];
+ format = csid_get_fmt_entry(csid->formats, csid->nformats,
+ input_format->code);
+ num_bytes_per_line = input_format->width * format->bpp * format->spp / 8;
+ num_lines = input_format->height;
+
+ /* 31:24 V blank, 23:13 H blank, 3:2 num of active DT */
+ /* 1:0 VC */
+ val = ((CAMSS_CSID_TG_VC_CFG_V_BLANKING & 0xff) << 24) |
+ ((CAMSS_CSID_TG_VC_CFG_H_BLANKING & 0x7ff) << 13);
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_VC_CFG);
+
+ /* 28:16 bytes per lines, 12:0 num of lines */
+ val = ((num_bytes_per_line & 0x1fff) << 16) |
+ (num_lines & 0x1fff);
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_DT_n_CGG_0(0));
+
+ /* 5:0 data type */
+ val = format->data_type;
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_DT_n_CGG_1(0));
+
+ /* 2:0 output test pattern */
+ val = tg->mode;
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_DT_n_CGG_2(0));
+ } else {
+ struct csid_phy_config *phy = &csid->phy;
+
+ input_format = &csid->fmt[MSM_CSID_PAD_SINK];
+ format = csid_get_fmt_entry(csid->formats, csid->nformats,
+ input_format->code);
+
+ val = phy->lane_cnt - 1;
+ val |= phy->lane_assign << 4;
+
+ writel_relaxed(val, csid->base + CAMSS_CSID_CORE_CTRL_0);
+
+ val = phy->csiphy_id << 17;
+ val |= 0x9;
+
+ writel_relaxed(val, csid->base + CAMSS_CSID_CORE_CTRL_1);
+ }
+
+ /* Config LUT */
+
+ dt_shift = (cid % 4) * 8;
+ val = readl_relaxed(csid->base + CAMSS_CSID_CID_LUT_VC_n(vc));
+ val &= ~(0xff << dt_shift);
+ val |= format->data_type << dt_shift;
+ writel_relaxed(val, csid->base + CAMSS_CSID_CID_LUT_VC_n(vc));
+
+ val = CAMSS_CSID_CID_n_CFG_ISPIF_EN;
+ val |= CAMSS_CSID_CID_n_CFG_RDI_EN;
+ val |= format->decode_format << CAMSS_CSID_CID_n_CFG_DECODE_FORMAT_SHIFT;
+ val |= CAMSS_CSID_CID_n_CFG_RDI_MODE_RAW_DUMP;
+ writel_relaxed(val, csid->base + CAMSS_CSID_CID_n_CFG(cid));
+
+ if (tg->enabled) {
+ val = CAMSS_CSID_TG_CTRL_ENABLE;
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_CTRL);
+ }
+ } else {
+ if (tg->enabled) {
+ val = CAMSS_CSID_TG_CTRL_DISABLE;
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_CTRL);
+ }
+ }
+}
+
+static int csid_configure_testgen_pattern(struct csid_device *csid, s32 val)
+{
+ s32 regval = val - 1;
+
+ if (regval > 0 || regval <= CSID_PAYLOAD_MODE_MAX_SUPPORTED_4_1)
+ csid->testgen.mode = regval;
+
+ return 0;
+}
+
+static u32 csid_hw_version(struct csid_device *csid)
+{
+ u32 hw_version = readl_relaxed(csid->base + CAMSS_CSID_HW_VERSION);
+
+ dev_dbg(csid->camss->dev, "CSID HW Version = 0x%08x\n", hw_version);
+
+ return hw_version;
+}
+
+static irqreturn_t csid_isr(int irq, void *dev)
+{
+ struct csid_device *csid = dev;
+ u32 value;
+
+ value = readl_relaxed(csid->base + CAMSS_CSID_IRQ_STATUS);
+ writel_relaxed(value, csid->base + CAMSS_CSID_IRQ_CLEAR_CMD);
+
+ if ((value >> 11) & 0x1)
+ complete(&csid->reset_complete);
+
+ return IRQ_HANDLED;
+}
+
+static int csid_reset(struct csid_device *csid)
+{
+ unsigned long time;
+
+ reinit_completion(&csid->reset_complete);
+
+ writel_relaxed(0x7fff, csid->base + CAMSS_CSID_RST_CMD);
+
+ time = wait_for_completion_timeout(&csid->reset_complete,
+ msecs_to_jiffies(CSID_RESET_TIMEOUT_MS));
+ if (!time) {
+ dev_err(csid->camss->dev, "CSID reset timeout\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static u32 csid_src_pad_code(struct csid_device *csid, u32 sink_code,
+ unsigned int match_format_idx, u32 match_code)
+{
+ if (match_format_idx > 0)
+ return 0;
+
+ return sink_code;
+}
+
+static void csid_subdev_init(struct csid_device *csid)
+{
+ csid->formats = csid_formats;
+ csid->nformats = ARRAY_SIZE(csid_formats);
+ csid->testgen.modes = csid_testgen_modes;
+ csid->testgen.nmodes = CSID_PAYLOAD_MODE_MAX_SUPPORTED_4_1;
+}
+
+const struct csid_hw_ops csid_ops_4_1 = {
+ .configure_stream = csid_configure_stream,
+ .configure_testgen_pattern = csid_configure_testgen_pattern,
+ .hw_version = csid_hw_version,
+ .isr = csid_isr,
+ .reset = csid_reset,
+ .src_pad_code = csid_src_pad_code,
+ .subdev_init = csid_subdev_init,
+};
diff --git a/drivers/media/platform/qcom/camss/camss-csid-4-7.c b/drivers/media/platform/qcom/camss/camss-csid-4-7.c
new file mode 100644
index 000000000000..16a69b140f4e
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-csid-4-7.c
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-csid-4-7.c
+ *
+ * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module
+ *
+ * Copyright (C) 2020 Linaro Ltd.
+ */
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+
+#include "camss-csid.h"
+#include "camss.h"
+
+#define CAMSS_CSID_HW_VERSION 0x0
+#define CAMSS_CSID_CORE_CTRL_0 0x004
+#define CAMSS_CSID_CORE_CTRL_1 0x008
+#define CAMSS_CSID_RST_CMD 0x010
+#define CAMSS_CSID_CID_LUT_VC_n(n) (0x014 + 0x4 * (n))
+#define CAMSS_CSID_CID_n_CFG(n) (0x024 + 0x4 * (n))
+#define CAMSS_CSID_CID_n_CFG_ISPIF_EN BIT(0)
+#define CAMSS_CSID_CID_n_CFG_RDI_EN BIT(1)
+#define CAMSS_CSID_CID_n_CFG_DECODE_FORMAT_SHIFT 4
+#define CAMSS_CSID_CID_n_CFG_PLAIN_FORMAT_8 (0 << 8)
+#define CAMSS_CSID_CID_n_CFG_PLAIN_FORMAT_16 (1 << 8)
+#define CAMSS_CSID_CID_n_CFG_PLAIN_ALIGNMENT_LSB (0 << 9)
+#define CAMSS_CSID_CID_n_CFG_PLAIN_ALIGNMENT_MSB (1 << 9)
+#define CAMSS_CSID_CID_n_CFG_RDI_MODE_RAW_DUMP (0 << 10)
+#define CAMSS_CSID_CID_n_CFG_RDI_MODE_PLAIN_PACKING (1 << 10)
+#define CAMSS_CSID_IRQ_CLEAR_CMD 0x064
+#define CAMSS_CSID_IRQ_MASK 0x068
+#define CAMSS_CSID_IRQ_STATUS 0x06c
+#define CAMSS_CSID_TG_CTRL 0x0a8
+#define CAMSS_CSID_TG_CTRL_DISABLE 0xa06436
+#define CAMSS_CSID_TG_CTRL_ENABLE 0xa06437
+#define CAMSS_CSID_TG_VC_CFG 0x0ac
+#define CAMSS_CSID_TG_VC_CFG_H_BLANKING 0x3ff
+#define CAMSS_CSID_TG_VC_CFG_V_BLANKING 0x7f
+#define CAMSS_CSID_TG_DT_n_CGG_0(n) (0x0b4 + 0xc * (n))
+#define CAMSS_CSID_TG_DT_n_CGG_1(n) (0x0b8 + 0xc * (n))
+#define CAMSS_CSID_TG_DT_n_CGG_2(n) (0x0bc + 0xc * (n))
+
+
+static const struct csid_format csid_formats[] = {
+ {
+ MEDIA_BUS_FMT_UYVY8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_VYUY8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_YUYV8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_YVYU8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR14_1X14,
+ DATA_TYPE_RAW_14BIT,
+ DECODE_FORMAT_UNCOMPRESSED_14_BIT,
+ 14,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG14_1X14,
+ DATA_TYPE_RAW_14BIT,
+ DECODE_FORMAT_UNCOMPRESSED_14_BIT,
+ 14,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG14_1X14,
+ DATA_TYPE_RAW_14BIT,
+ DECODE_FORMAT_UNCOMPRESSED_14_BIT,
+ 14,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB14_1X14,
+ DATA_TYPE_RAW_14BIT,
+ DECODE_FORMAT_UNCOMPRESSED_14_BIT,
+ 14,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_Y10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+};
+
+static void csid_configure_stream(struct csid_device *csid, u8 enable)
+{
+ struct csid_testgen_config *tg = &csid->testgen;
+ u32 sink_code = csid->fmt[MSM_CSID_PAD_SINK].code;
+ u32 src_code = csid->fmt[MSM_CSID_PAD_SRC].code;
+ u32 val;
+
+ if (enable) {
+ struct v4l2_mbus_framefmt *input_format;
+ const struct csid_format *format;
+ u8 vc = 0; /* Virtual Channel 0 */
+ u8 cid = vc * 4; /* id of Virtual Channel and Data Type set */
+ u8 dt_shift;
+
+ if (tg->enabled) {
+ /* Config Test Generator */
+ u32 num_bytes_per_line, num_lines;
+
+ input_format = &csid->fmt[MSM_CSID_PAD_SRC];
+ format = csid_get_fmt_entry(csid->formats, csid->nformats,
+ input_format->code);
+ num_bytes_per_line = input_format->width * format->bpp * format->spp / 8;
+ num_lines = input_format->height;
+
+ /* 31:24 V blank, 23:13 H blank, 3:2 num of active DT */
+ /* 1:0 VC */
+ val = ((CAMSS_CSID_TG_VC_CFG_V_BLANKING & 0xff) << 24) |
+ ((CAMSS_CSID_TG_VC_CFG_H_BLANKING & 0x7ff) << 13);
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_VC_CFG);
+
+ /* 28:16 bytes per lines, 12:0 num of lines */
+ val = ((num_bytes_per_line & 0x1fff) << 16) |
+ (num_lines & 0x1fff);
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_DT_n_CGG_0(0));
+
+ /* 5:0 data type */
+ val = format->data_type;
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_DT_n_CGG_1(0));
+
+ /* 2:0 output test pattern */
+ val = tg->mode;
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_DT_n_CGG_2(0));
+ } else {
+ struct csid_phy_config *phy = &csid->phy;
+
+ input_format = &csid->fmt[MSM_CSID_PAD_SINK];
+ format = csid_get_fmt_entry(csid->formats, csid->nformats,
+ input_format->code);
+
+ val = phy->lane_cnt - 1;
+ val |= phy->lane_assign << 4;
+
+ writel_relaxed(val, csid->base + CAMSS_CSID_CORE_CTRL_0);
+
+ val = phy->csiphy_id << 17;
+ val |= 0x9;
+
+ writel_relaxed(val, csid->base + CAMSS_CSID_CORE_CTRL_1);
+ }
+
+ /* Config LUT */
+
+ dt_shift = (cid % 4) * 8;
+
+ val = readl_relaxed(csid->base + CAMSS_CSID_CID_LUT_VC_n(vc));
+ val &= ~(0xff << dt_shift);
+ val |= format->data_type << dt_shift;
+ writel_relaxed(val, csid->base + CAMSS_CSID_CID_LUT_VC_n(vc));
+
+ val = CAMSS_CSID_CID_n_CFG_ISPIF_EN;
+ val |= CAMSS_CSID_CID_n_CFG_RDI_EN;
+ val |= format->decode_format << CAMSS_CSID_CID_n_CFG_DECODE_FORMAT_SHIFT;
+ val |= CAMSS_CSID_CID_n_CFG_RDI_MODE_RAW_DUMP;
+
+ if ((sink_code == MEDIA_BUS_FMT_SBGGR10_1X10 &&
+ src_code == MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE) ||
+ (sink_code == MEDIA_BUS_FMT_Y10_1X10 &&
+ src_code == MEDIA_BUS_FMT_Y10_2X8_PADHI_LE)) {
+ val |= CAMSS_CSID_CID_n_CFG_RDI_MODE_PLAIN_PACKING;
+ val |= CAMSS_CSID_CID_n_CFG_PLAIN_FORMAT_16;
+ val |= CAMSS_CSID_CID_n_CFG_PLAIN_ALIGNMENT_LSB;
+ }
+
+ writel_relaxed(val, csid->base + CAMSS_CSID_CID_n_CFG(cid));
+
+ if (tg->enabled) {
+ val = CAMSS_CSID_TG_CTRL_ENABLE;
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_CTRL);
+ }
+ } else {
+ if (tg->enabled) {
+ val = CAMSS_CSID_TG_CTRL_DISABLE;
+ writel_relaxed(val, csid->base + CAMSS_CSID_TG_CTRL);
+ }
+ }
+}
+
+static int csid_configure_testgen_pattern(struct csid_device *csid, s32 val)
+{
+ s32 regval = val - 1;
+
+ if (regval > 0 || regval <= CSID_PAYLOAD_MODE_MAX_SUPPORTED_4_7)
+ csid->testgen.mode = regval;
+
+ return 0;
+}
+
+static u32 csid_hw_version(struct csid_device *csid)
+{
+ u32 hw_version = readl_relaxed(csid->base + CAMSS_CSID_HW_VERSION);
+
+ dev_dbg(csid->camss->dev, "CSID HW Version = 0x%08x\n", hw_version);
+
+ return hw_version;
+}
+
+/*
+ * isr - CSID module interrupt service routine
+ * @irq: Interrupt line
+ * @dev: CSID device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t csid_isr(int irq, void *dev)
+{
+ struct csid_device *csid = dev;
+ u32 value;
+
+ value = readl_relaxed(csid->base + CAMSS_CSID_IRQ_STATUS);
+ writel_relaxed(value, csid->base + CAMSS_CSID_IRQ_CLEAR_CMD);
+
+ if ((value >> 11) & 0x1)
+ complete(&csid->reset_complete);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * csid_reset - Trigger reset on CSID module and wait to complete
+ * @csid: CSID device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csid_reset(struct csid_device *csid)
+{
+ unsigned long time;
+
+ reinit_completion(&csid->reset_complete);
+
+ writel_relaxed(0x7fff, csid->base + CAMSS_CSID_RST_CMD);
+
+ time = wait_for_completion_timeout(&csid->reset_complete,
+ msecs_to_jiffies(CSID_RESET_TIMEOUT_MS));
+ if (!time) {
+ dev_err(csid->camss->dev, "CSID reset timeout\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static u32 csid_src_pad_code(struct csid_device *csid, u32 sink_code,
+ unsigned int match_format_idx, u32 match_code)
+{
+ switch (sink_code) {
+ case MEDIA_BUS_FMT_SBGGR10_1X10:
+ {
+ u32 src_code[] = {
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+ MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE,
+ };
+
+ return csid_find_code(src_code, ARRAY_SIZE(src_code),
+ match_format_idx, match_code);
+ }
+ case MEDIA_BUS_FMT_Y10_1X10:
+ {
+ u32 src_code[] = {
+ MEDIA_BUS_FMT_Y10_1X10,
+ MEDIA_BUS_FMT_Y10_2X8_PADHI_LE,
+ };
+
+ return csid_find_code(src_code, ARRAY_SIZE(src_code),
+ match_format_idx, match_code);
+ }
+ default:
+ if (match_format_idx > 0)
+ return 0;
+
+ return sink_code;
+ }
+}
+
+static void csid_subdev_init(struct csid_device *csid)
+{
+ csid->formats = csid_formats;
+ csid->nformats = ARRAY_SIZE(csid_formats);
+ csid->testgen.modes = csid_testgen_modes;
+ csid->testgen.nmodes = CSID_PAYLOAD_MODE_MAX_SUPPORTED_4_7;
+}
+
+const struct csid_hw_ops csid_ops_4_7 = {
+ .configure_stream = csid_configure_stream,
+ .configure_testgen_pattern = csid_configure_testgen_pattern,
+ .hw_version = csid_hw_version,
+ .isr = csid_isr,
+ .reset = csid_reset,
+ .src_pad_code = csid_src_pad_code,
+ .subdev_init = csid_subdev_init,
+};
diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
index be3fe76f3dc3..601bd810f2b0 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.c
+++ b/drivers/media/platform/qcom/camss/camss-csid.c
@@ -26,405 +26,35 @@
#define MSM_CSID_NAME "msm_csid"
-#define CAMSS_CSID_HW_VERSION 0x0
-#define CAMSS_CSID_CORE_CTRL_0 0x004
-#define CAMSS_CSID_CORE_CTRL_1 0x008
-#define CAMSS_CSID_RST_CMD(v) ((v) == CAMSS_8x16 ? 0x00c : 0x010)
-#define CAMSS_CSID_CID_LUT_VC_n(v, n) \
- (((v) == CAMSS_8x16 ? 0x010 : 0x014) + 0x4 * (n))
-#define CAMSS_CSID_CID_n_CFG(v, n) \
- (((v) == CAMSS_8x16 ? 0x020 : 0x024) + 0x4 * (n))
-#define CAMSS_CSID_CID_n_CFG_ISPIF_EN BIT(0)
-#define CAMSS_CSID_CID_n_CFG_RDI_EN BIT(1)
-#define CAMSS_CSID_CID_n_CFG_DECODE_FORMAT_SHIFT 4
-#define CAMSS_CSID_CID_n_CFG_PLAIN_FORMAT_8 (0 << 8)
-#define CAMSS_CSID_CID_n_CFG_PLAIN_FORMAT_16 (1 << 8)
-#define CAMSS_CSID_CID_n_CFG_PLAIN_ALIGNMENT_LSB (0 << 9)
-#define CAMSS_CSID_CID_n_CFG_PLAIN_ALIGNMENT_MSB (1 << 9)
-#define CAMSS_CSID_CID_n_CFG_RDI_MODE_RAW_DUMP (0 << 10)
-#define CAMSS_CSID_CID_n_CFG_RDI_MODE_PLAIN_PACKING (1 << 10)
-#define CAMSS_CSID_IRQ_CLEAR_CMD(v) ((v) == CAMSS_8x16 ? 0x060 : 0x064)
-#define CAMSS_CSID_IRQ_MASK(v) ((v) == CAMSS_8x16 ? 0x064 : 0x068)
-#define CAMSS_CSID_IRQ_STATUS(v) ((v) == CAMSS_8x16 ? 0x068 : 0x06c)
-#define CAMSS_CSID_TG_CTRL(v) ((v) == CAMSS_8x16 ? 0x0a0 : 0x0a8)
-#define CAMSS_CSID_TG_CTRL_DISABLE 0xa06436
-#define CAMSS_CSID_TG_CTRL_ENABLE 0xa06437
-#define CAMSS_CSID_TG_VC_CFG(v) ((v) == CAMSS_8x16 ? 0x0a4 : 0x0ac)
-#define CAMSS_CSID_TG_VC_CFG_H_BLANKING 0x3ff
-#define CAMSS_CSID_TG_VC_CFG_V_BLANKING 0x7f
-#define CAMSS_CSID_TG_DT_n_CGG_0(v, n) \
- (((v) == CAMSS_8x16 ? 0x0ac : 0x0b4) + 0xc * (n))
-#define CAMSS_CSID_TG_DT_n_CGG_1(v, n) \
- (((v) == CAMSS_8x16 ? 0x0b0 : 0x0b8) + 0xc * (n))
-#define CAMSS_CSID_TG_DT_n_CGG_2(v, n) \
- (((v) == CAMSS_8x16 ? 0x0b4 : 0x0bc) + 0xc * (n))
-
-#define DATA_TYPE_EMBEDDED_DATA_8BIT 0x12
-#define DATA_TYPE_YUV422_8BIT 0x1e
-#define DATA_TYPE_RAW_6BIT 0x28
-#define DATA_TYPE_RAW_8BIT 0x2a
-#define DATA_TYPE_RAW_10BIT 0x2b
-#define DATA_TYPE_RAW_12BIT 0x2c
-#define DATA_TYPE_RAW_14BIT 0x2d
-
-#define DECODE_FORMAT_UNCOMPRESSED_6_BIT 0x0
-#define DECODE_FORMAT_UNCOMPRESSED_8_BIT 0x1
-#define DECODE_FORMAT_UNCOMPRESSED_10_BIT 0x2
-#define DECODE_FORMAT_UNCOMPRESSED_12_BIT 0x3
-#define DECODE_FORMAT_UNCOMPRESSED_14_BIT 0x8
-
-#define CSID_RESET_TIMEOUT_MS 500
-
-struct csid_format {
- u32 code;
- u8 data_type;
- u8 decode_format;
- u8 bpp;
- u8 spp; /* bus samples per pixel */
-};
-
-static const struct csid_format csid_formats_8x16[] = {
- {
- MEDIA_BUS_FMT_UYVY8_2X8,
- DATA_TYPE_YUV422_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 2,
- },
- {
- MEDIA_BUS_FMT_VYUY8_2X8,
- DATA_TYPE_YUV422_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 2,
- },
- {
- MEDIA_BUS_FMT_YUYV8_2X8,
- DATA_TYPE_YUV422_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 2,
- },
- {
- MEDIA_BUS_FMT_YVYU8_2X8,
- DATA_TYPE_YUV422_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 2,
- },
- {
- MEDIA_BUS_FMT_SBGGR8_1X8,
- DATA_TYPE_RAW_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGBRG8_1X8,
- DATA_TYPE_RAW_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGRBG8_1X8,
- DATA_TYPE_RAW_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 1,
- },
- {
- MEDIA_BUS_FMT_SRGGB8_1X8,
- DATA_TYPE_RAW_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 1,
- },
- {
- MEDIA_BUS_FMT_SBGGR10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGBRG10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGRBG10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
- {
- MEDIA_BUS_FMT_SRGGB10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
- {
- MEDIA_BUS_FMT_SBGGR12_1X12,
- DATA_TYPE_RAW_12BIT,
- DECODE_FORMAT_UNCOMPRESSED_12_BIT,
- 12,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGBRG12_1X12,
- DATA_TYPE_RAW_12BIT,
- DECODE_FORMAT_UNCOMPRESSED_12_BIT,
- 12,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGRBG12_1X12,
- DATA_TYPE_RAW_12BIT,
- DECODE_FORMAT_UNCOMPRESSED_12_BIT,
- 12,
- 1,
- },
- {
- MEDIA_BUS_FMT_SRGGB12_1X12,
- DATA_TYPE_RAW_12BIT,
- DECODE_FORMAT_UNCOMPRESSED_12_BIT,
- 12,
- 1,
- },
- {
- MEDIA_BUS_FMT_Y10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
-};
-
-static const struct csid_format csid_formats_8x96[] = {
- {
- MEDIA_BUS_FMT_UYVY8_2X8,
- DATA_TYPE_YUV422_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 2,
- },
- {
- MEDIA_BUS_FMT_VYUY8_2X8,
- DATA_TYPE_YUV422_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 2,
- },
- {
- MEDIA_BUS_FMT_YUYV8_2X8,
- DATA_TYPE_YUV422_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 2,
- },
- {
- MEDIA_BUS_FMT_YVYU8_2X8,
- DATA_TYPE_YUV422_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 2,
- },
- {
- MEDIA_BUS_FMT_SBGGR8_1X8,
- DATA_TYPE_RAW_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGBRG8_1X8,
- DATA_TYPE_RAW_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGRBG8_1X8,
- DATA_TYPE_RAW_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 1,
- },
- {
- MEDIA_BUS_FMT_SRGGB8_1X8,
- DATA_TYPE_RAW_8BIT,
- DECODE_FORMAT_UNCOMPRESSED_8_BIT,
- 8,
- 1,
- },
- {
- MEDIA_BUS_FMT_SBGGR10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGBRG10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGRBG10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
- {
- MEDIA_BUS_FMT_SRGGB10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
- {
- MEDIA_BUS_FMT_SBGGR12_1X12,
- DATA_TYPE_RAW_12BIT,
- DECODE_FORMAT_UNCOMPRESSED_12_BIT,
- 12,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGBRG12_1X12,
- DATA_TYPE_RAW_12BIT,
- DECODE_FORMAT_UNCOMPRESSED_12_BIT,
- 12,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGRBG12_1X12,
- DATA_TYPE_RAW_12BIT,
- DECODE_FORMAT_UNCOMPRESSED_12_BIT,
- 12,
- 1,
- },
- {
- MEDIA_BUS_FMT_SRGGB12_1X12,
- DATA_TYPE_RAW_12BIT,
- DECODE_FORMAT_UNCOMPRESSED_12_BIT,
- 12,
- 1,
- },
- {
- MEDIA_BUS_FMT_SBGGR14_1X14,
- DATA_TYPE_RAW_14BIT,
- DECODE_FORMAT_UNCOMPRESSED_14_BIT,
- 14,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGBRG14_1X14,
- DATA_TYPE_RAW_14BIT,
- DECODE_FORMAT_UNCOMPRESSED_14_BIT,
- 14,
- 1,
- },
- {
- MEDIA_BUS_FMT_SGRBG14_1X14,
- DATA_TYPE_RAW_14BIT,
- DECODE_FORMAT_UNCOMPRESSED_14_BIT,
- 14,
- 1,
- },
- {
- MEDIA_BUS_FMT_SRGGB14_1X14,
- DATA_TYPE_RAW_14BIT,
- DECODE_FORMAT_UNCOMPRESSED_14_BIT,
- 14,
- 1,
- },
- {
- MEDIA_BUS_FMT_Y10_1X10,
- DATA_TYPE_RAW_10BIT,
- DECODE_FORMAT_UNCOMPRESSED_10_BIT,
- 10,
- 1,
- },
-};
-static u32 csid_find_code(u32 *code, unsigned int n_code,
- unsigned int index, u32 req_code)
+u32 csid_find_code(u32 *codes, unsigned int ncodes,
+ unsigned int match_format_idx, u32 match_code)
{
int i;
- if (!req_code && (index >= n_code))
+ if (!match_code && (match_format_idx >= ncodes))
return 0;
- for (i = 0; i < n_code; i++)
- if (req_code) {
- if (req_code == code[i])
- return req_code;
+ for (i = 0; i < ncodes; i++)
+ if (match_code) {
+ if (codes[i] == match_code)
+ return match_code;
} else {
- if (i == index)
- return code[i];
- }
-
- return code[0];
-}
-
-static u32 csid_src_pad_code(struct csid_device *csid, u32 sink_code,
- unsigned int index, u32 src_req_code)
-{
- if (csid->camss->version == CAMSS_8x16) {
- if (index > 0)
- return 0;
-
- return sink_code;
- } else if (csid->camss->version == CAMSS_8x96 ||
- csid->camss->version == CAMSS_660) {
- switch (sink_code) {
- case MEDIA_BUS_FMT_SBGGR10_1X10:
- {
- u32 src_code[] = {
- MEDIA_BUS_FMT_SBGGR10_1X10,
- MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE,
- };
-
- return csid_find_code(src_code, ARRAY_SIZE(src_code),
- index, src_req_code);
- }
- case MEDIA_BUS_FMT_Y10_1X10:
- {
- u32 src_code[] = {
- MEDIA_BUS_FMT_Y10_1X10,
- MEDIA_BUS_FMT_Y10_2X8_PADHI_LE,
- };
-
- return csid_find_code(src_code, ARRAY_SIZE(src_code),
- index, src_req_code);
+ if (i == match_format_idx)
+ return codes[i];
}
- default:
- if (index > 0)
- return 0;
- return sink_code;
- }
- } else {
- return 0;
- }
+ return codes[0];
}
-static const struct csid_format *csid_get_fmt_entry(
+const struct csid_format *csid_get_fmt_entry(
const struct csid_format *formats,
- unsigned int nformat,
+ unsigned int nformats,
u32 code)
{
unsigned int i;
- for (i = 0; i < nformat; i++)
+ for (i = 0; i < nformats; i++)
if (code == formats[i].code)
return &formats[i];
@@ -433,28 +63,6 @@ static const struct csid_format *csid_get_fmt_entry(
return &formats[0];
}
-/*
- * csid_isr - CSID module interrupt handler
- * @irq: Interrupt line
- * @dev: CSID device
- *
- * Return IRQ_HANDLED on success
- */
-static irqreturn_t csid_isr(int irq, void *dev)
-{
- struct csid_device *csid = dev;
- enum camss_version ver = csid->camss->version;
- u32 value;
-
- value = readl_relaxed(csid->base + CAMSS_CSID_IRQ_STATUS(ver));
- writel_relaxed(value, csid->base + CAMSS_CSID_IRQ_CLEAR_CMD(ver));
-
- if ((value >> 11) & 0x1)
- complete(&csid->reset_complete);
-
- return IRQ_HANDLED;
-}
-
/*
* csid_set_clock_rates - Calculate and set clock rates on CSID module
* @csiphy: CSID device
@@ -521,31 +129,6 @@ static int csid_set_clock_rates(struct csid_device *csid)
return 0;
}
-/*
- * csid_reset - Trigger reset on CSID module and wait to complete
- * @csid: CSID device
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int csid_reset(struct csid_device *csid)
-{
- unsigned long time;
-
- reinit_completion(&csid->reset_complete);
-
- writel_relaxed(0x7fff, csid->base +
- CAMSS_CSID_RST_CMD(csid->camss->version));
-
- time = wait_for_completion_timeout(&csid->reset_complete,
- msecs_to_jiffies(CSID_RESET_TIMEOUT_MS));
- if (!time) {
- dev_err(csid->camss->dev, "CSID reset timeout\n");
- return -EIO;
- }
-
- return 0;
-}
-
/*
* csid_set_power - Power on/off CSID module
* @sd: CSID V4L2 subdevice
@@ -560,8 +143,6 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
int ret;
if (on) {
- u32 hw_version;
-
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
pm_runtime_put_sync(dev);
@@ -590,7 +171,7 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
enable_irq(csid->irq);
- ret = csid_reset(csid);
+ ret = csid->ops->reset(csid);
if (ret < 0) {
disable_irq(csid->irq);
camss_disable_clocks(csid->nclocks, csid->clock);
@@ -599,8 +180,7 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
return ret;
}
- hw_version = readl_relaxed(csid->base + CAMSS_CSID_HW_VERSION);
- dev_dbg(dev, "CSID HW Version = 0x%08x\n", hw_version);
+ csid->ops->hw_version(csid);
} else {
disable_irq(csid->irq);
camss_disable_clocks(csid->nclocks, csid->clock);
@@ -623,16 +203,9 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
static int csid_set_stream(struct v4l2_subdev *sd, int enable)
{
struct csid_device *csid = v4l2_get_subdevdata(sd);
- struct csid_testgen_config *tg = &csid->testgen;
- enum camss_version ver = csid->camss->version;
- u32 val;
+ int ret;
if (enable) {
- u8 vc = 0; /* Virtual Channel 0 */
- u8 cid = vc * 4; /* id of Virtual Channel and Data Type set */
- u8 dt, dt_shift, df;
- int ret;
-
ret = v4l2_ctrl_handler_setup(&csid->ctrls);
if (ret < 0) {
dev_err(csid->camss->dev,
@@ -640,116 +213,13 @@ static int csid_set_stream(struct v4l2_subdev *sd, int enable)
return ret;
}
- if (!tg->enabled &&
+ if (!csid->testgen.enabled &&
!media_entity_remote_pad(&csid->pads[MSM_CSID_PAD_SINK]))
return -ENOLINK;
-
- if (tg->enabled) {
- /* Config Test Generator */
- struct v4l2_mbus_framefmt *f =
- &csid->fmt[MSM_CSID_PAD_SRC];
- const struct csid_format *format = csid_get_fmt_entry(
- csid->formats, csid->nformats, f->code);
- u32 num_bytes_per_line =
- f->width * format->bpp * format->spp / 8;
- u32 num_lines = f->height;
-
- /* 31:24 V blank, 23:13 H blank, 3:2 num of active DT */
- /* 1:0 VC */
- val = ((CAMSS_CSID_TG_VC_CFG_V_BLANKING & 0xff) << 24) |
- ((CAMSS_CSID_TG_VC_CFG_H_BLANKING & 0x7ff) << 13);
- writel_relaxed(val, csid->base +
- CAMSS_CSID_TG_VC_CFG(ver));
-
- /* 28:16 bytes per lines, 12:0 num of lines */
- val = ((num_bytes_per_line & 0x1fff) << 16) |
- (num_lines & 0x1fff);
- writel_relaxed(val, csid->base +
- CAMSS_CSID_TG_DT_n_CGG_0(ver, 0));
-
- dt = format->data_type;
-
- /* 5:0 data type */
- val = dt;
- writel_relaxed(val, csid->base +
- CAMSS_CSID_TG_DT_n_CGG_1(ver, 0));
-
- /* 2:0 output test pattern */
- val = tg->payload_mode;
- writel_relaxed(val, csid->base +
- CAMSS_CSID_TG_DT_n_CGG_2(ver, 0));
-
- df = format->decode_format;
- } else {
- struct v4l2_mbus_framefmt *f =
- &csid->fmt[MSM_CSID_PAD_SINK];
- const struct csid_format *format = csid_get_fmt_entry(
- csid->formats, csid->nformats, f->code);
- struct csid_phy_config *phy = &csid->phy;
-
- val = phy->lane_cnt - 1;
- val |= phy->lane_assign << 4;
-
- writel_relaxed(val,
- csid->base + CAMSS_CSID_CORE_CTRL_0);
-
- val = phy->csiphy_id << 17;
- val |= 0x9;
-
- writel_relaxed(val,
- csid->base + CAMSS_CSID_CORE_CTRL_1);
-
- dt = format->data_type;
- df = format->decode_format;
- }
-
- /* Config LUT */
-
- dt_shift = (cid % 4) * 8;
-
- val = readl_relaxed(csid->base +
- CAMSS_CSID_CID_LUT_VC_n(ver, vc));
- val &= ~(0xff << dt_shift);
- val |= dt << dt_shift;
- writel_relaxed(val, csid->base +
- CAMSS_CSID_CID_LUT_VC_n(ver, vc));
-
- val = CAMSS_CSID_CID_n_CFG_ISPIF_EN;
- val |= CAMSS_CSID_CID_n_CFG_RDI_EN;
- val |= df << CAMSS_CSID_CID_n_CFG_DECODE_FORMAT_SHIFT;
- val |= CAMSS_CSID_CID_n_CFG_RDI_MODE_RAW_DUMP;
-
- if (csid->camss->version == CAMSS_8x96 ||
- csid->camss->version == CAMSS_660) {
- u32 sink_code = csid->fmt[MSM_CSID_PAD_SINK].code;
- u32 src_code = csid->fmt[MSM_CSID_PAD_SRC].code;
-
- if ((sink_code == MEDIA_BUS_FMT_SBGGR10_1X10 &&
- src_code == MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE) ||
- (sink_code == MEDIA_BUS_FMT_Y10_1X10 &&
- src_code == MEDIA_BUS_FMT_Y10_2X8_PADHI_LE)) {
- val |= CAMSS_CSID_CID_n_CFG_RDI_MODE_PLAIN_PACKING;
- val |= CAMSS_CSID_CID_n_CFG_PLAIN_FORMAT_16;
- val |= CAMSS_CSID_CID_n_CFG_PLAIN_ALIGNMENT_LSB;
- }
- }
-
- writel_relaxed(val, csid->base +
- CAMSS_CSID_CID_n_CFG(ver, cid));
-
- if (tg->enabled) {
- val = CAMSS_CSID_TG_CTRL_ENABLE;
- writel_relaxed(val, csid->base +
- CAMSS_CSID_TG_CTRL(ver));
- }
- } else {
- if (tg->enabled) {
- val = CAMSS_CSID_TG_CTRL_DISABLE;
- writel_relaxed(val, csid->base +
- CAMSS_CSID_TG_CTRL(ver));
- }
}
+ csid->ops->configure_stream(csid, enable);
+
return 0;
}
@@ -818,7 +288,7 @@ static void csid_try_format(struct csid_device *csid,
*fmt = *__csid_get_format(csid, cfg,
MSM_CSID_PAD_SINK, which);
- fmt->code = csid_src_pad_code(csid, fmt->code, 0, code);
+ fmt->code = csid->ops->src_pad_code(csid, fmt->code, 0, code);
} else {
/* Test generator is enabled, set format on source */
/* pad to allow test generator usage */
@@ -868,7 +338,7 @@ static int csid_enum_mbus_code(struct v4l2_subdev *sd,
MSM_CSID_PAD_SINK,
code->which);
- code->code = csid_src_pad_code(csid, sink_fmt->code,
+ code->code = csid->ops->src_pad_code(csid, sink_fmt->code,
code->index, 0);
if (!code->code)
return -EINVAL;
@@ -1004,15 +474,6 @@ static int csid_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
return csid_set_format(sd, fh ? fh->pad : NULL, &format);
}
-static const char * const csid_test_pattern_menu[] = {
- "Disabled",
- "Incrementing",
- "Alternating 0x55/0xAA",
- "All Zeros 0x00",
- "All Ones 0xFF",
- "Pseudo-random Data",
-};
-
/*
* csid_set_test_pattern - Set test generator's pattern mode
* @csid: CSID device
@@ -1030,25 +491,7 @@ static int csid_set_test_pattern(struct csid_device *csid, s32 value)
tg->enabled = !!value;
- switch (value) {
- case 1:
- tg->payload_mode = CSID_PAYLOAD_MODE_INCREMENTING;
- break;
- case 2:
- tg->payload_mode = CSID_PAYLOAD_MODE_ALTERNATING_55_AA;
- break;
- case 3:
- tg->payload_mode = CSID_PAYLOAD_MODE_ALL_ZEROES;
- break;
- case 4:
- tg->payload_mode = CSID_PAYLOAD_MODE_ALL_ONES;
- break;
- case 5:
- tg->payload_mode = CSID_PAYLOAD_MODE_RANDOM;
- break;
- }
-
- return 0;
+ return csid->ops->configure_testgen_pattern(csid, value);
}
/*
@@ -1097,17 +540,14 @@ int msm_csid_subdev_init(struct camss *camss, struct csid_device *csid,
csid->id = id;
if (camss->version == CAMSS_8x16) {
- csid->formats = csid_formats_8x16;
- csid->nformats =
- ARRAY_SIZE(csid_formats_8x16);
+ csid->ops = &csid_ops_4_1;
} else if (camss->version == CAMSS_8x96 ||
camss->version == CAMSS_660) {
- csid->formats = csid_formats_8x96;
- csid->nformats =
- ARRAY_SIZE(csid_formats_8x96);
+ csid->ops = &csid_ops_4_7;
} else {
return -EINVAL;
}
+ csid->ops->subdev_init(csid);
/* Memory */
@@ -1130,7 +570,7 @@ int msm_csid_subdev_init(struct camss *camss, struct csid_device *csid,
csid->irq = r->start;
snprintf(csid->irq_name, sizeof(csid->irq_name), "%s_%s%d",
dev_name(dev), MSM_CSID_NAME, csid->id);
- ret = devm_request_irq(dev, csid->irq, csid_isr,
+ ret = devm_request_irq(dev, csid->irq, csid->ops->isr,
IRQF_TRIGGER_RISING, csid->irq_name, csid);
if (ret < 0) {
dev_err(dev, "request_irq failed: %d\n", ret);
@@ -1341,8 +781,8 @@ int msm_csid_register_entity(struct csid_device *csid,
csid->testgen_mode = v4l2_ctrl_new_std_menu_items(&csid->ctrls,
&csid_ctrl_ops, V4L2_CID_TEST_PATTERN,
- ARRAY_SIZE(csid_test_pattern_menu) - 1, 0, 0,
- csid_test_pattern_menu);
+ csid->testgen.nmodes, 0, 0,
+ csid->testgen.modes);
if (csid->ctrls.error) {
dev_err(dev, "Failed to init ctrl: %d\n", csid->ctrls.error);
diff --git a/drivers/media/platform/qcom/camss/camss-csid.h b/drivers/media/platform/qcom/camss/camss-csid.h
index 02fc34ee8a41..d40194e2bed3 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.h
+++ b/drivers/media/platform/qcom/camss/camss-csid.h
@@ -11,6 +11,7 @@
#define QC_MSM_CAMSS_CSID_H
#include <linux/clk.h>
+#include <linux/interrupt.h>
#include <media/media-entity.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
@@ -70,19 +71,50 @@
#define PLAIN_FORMAT_PLAIN16 0x1 /* supports DPCM, UNCOMPRESSED_10/16_BIT */
#define PLAIN_FORMAT_PLAIN32 0x2 /* supports UNCOMPRESSED_20_BIT */
+#define CSID_RESET_TIMEOUT_MS 500
-enum csid_payload_mode {
+
+enum csid_testgen_mode {
CSID_PAYLOAD_MODE_INCREMENTING = 0,
CSID_PAYLOAD_MODE_ALTERNATING_55_AA = 1,
CSID_PAYLOAD_MODE_ALL_ZEROES = 2,
CSID_PAYLOAD_MODE_ALL_ONES = 3,
CSID_PAYLOAD_MODE_RANDOM = 4,
CSID_PAYLOAD_MODE_USER_SPECIFIED = 5,
+ CSID_PAYLOAD_MODE_MAX_SUPPORTED_4_1 = 5,
+ CSID_PAYLOAD_MODE_MAX_SUPPORTED_4_7 = 5,
+ CSID_PAYLOAD_MODE_COMPLEX_PATTERN = 6,
+ CSID_PAYLOAD_MODE_COLOR_BOX = 7,
+ CSID_PAYLOAD_MODE_COLOR_BARS = 8,
+ CSID_PAYLOAD_MODE_MAX_SUPPORTED_170 = 8,
+};
+
+static const char * const csid_testgen_modes[] = {
+ "Disabled",
+ "Incrementing",
+ "Alternating 0x55/0xAA",
+ "All Zeros 0x00",
+ "All Ones 0xFF",
+ "Pseudo-random Data",
+ "User Specified",
+ "Complex pattern",
+ "Color box",
+ "Color bars",
+};
+
+struct csid_format {
+ u32 code;
+ u8 data_type;
+ u8 decode_format;
+ u8 bpp;
+ u8 spp; /* bus samples per pixel */
};
struct csid_testgen_config {
+ enum csid_testgen_mode mode;
+ const char * const*modes;
+ u8 nmodes;
u8 enabled;
- enum csid_payload_mode payload_mode;
};
struct csid_phy_config {
@@ -91,6 +123,65 @@ struct csid_phy_config {
u32 lane_assign;
};
+struct csid_device;
+
+struct csid_hw_ops {
+ /*
+ * configure_stream - Configures and starts CSID input stream
+ * @csid: CSID device
+ */
+ void (*configure_stream)(struct csid_device *csid, u8 enable);
+
+ /*
+ * configure_testgen_pattern - Validates and configures output pattern mode
+ * of test pattern generator
+ * @csid: CSID device
+ */
+ int (*configure_testgen_pattern)(struct csid_device *csid, s32 val);
+
+ /*
+ * hw_version - Read hardware version register from hardware
+ * @csid: CSID device
+ */
+ u32 (*hw_version)(struct csid_device *csid);
+
+ /*
+ * isr - CSID module interrupt service routine
+ * @irq: Interrupt line
+ * @dev: CSID device
+ *
+ * Return IRQ_HANDLED on success
+ */
+ irqreturn_t (*isr)(int irq, void *dev);
+
+ /*
+ * reset - Trigger reset on CSID module and wait to complete
+ * @csid: CSID device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+ int (*reset)(struct csid_device *csid);
+
+ /*
+ * src_pad_code - Pick an output/src format based on the input/sink format
+ * @csid: CSID device
+ * @sink_code: The sink format of the input
+ * @match_format_idx: Request preferred index, as defined by subdevice csid_format.
+ * Set @match_code to 0 if used.
+ * @match_code: Request preferred code, set @match_format_idx to 0 if used
+ *
+ * Return 0 on failure or src format code otherwise
+ */
+ u32 (*src_pad_code)(struct csid_device *csid, u32 sink_code,
+ unsigned int match_format_idx, u32 match_code);
+
+ /*
+ * subdev_init - Initialize CSID device according for hardware revision
+ * @csid: CSID device
+ */
+ void (*subdev_init)(struct csid_device *csid);
+};
+
struct csid_device {
struct camss *camss;
u8 id;
@@ -110,10 +201,37 @@ struct csid_device {
struct v4l2_ctrl *testgen_mode;
const struct csid_format *formats;
unsigned int nformats;
+ const struct csid_hw_ops *ops;
};
struct resources;
+
+/*
+ * csid_find_code - Find a format code in an array using array index or format code
+ * @codes: Array of format codes
+ * @ncodes: Length of @code array
+ * @req_format_idx: Request preferred index, as defined by subdevice csid_format.
+ * Set @match_code to 0 if used.
+ * @match_code: Request preferred code, set @req_format_idx to 0 if used
+ *
+ * Return 0 on failure or format code otherwise
+ */
+u32 csid_find_code(u32 *codes, unsigned int ncode,
+ unsigned int match_format_idx, u32 match_code);
+
+/*
+ * csid_get_fmt_entry - Find csid_format entry with matching format code
+ * @formats: Array of format csid_format entries
+ * @nformats: Length of @nformats array
+ * @code: Desired format code
+ *
+ * Return formats[0] on failure to find code
+ */
+const struct csid_format *csid_get_fmt_entry(const struct csid_format *formats,
+ unsigned int nformats,
+ u32 code);
+
int msm_csid_subdev_init(struct camss *camss, struct csid_device *csid,
const struct resources *res, u8 id);
@@ -124,4 +242,8 @@ void msm_csid_unregister_entity(struct csid_device *csid);
void msm_csid_get_csid_id(struct media_entity *entity, u8 *id);
+
+extern const struct csid_hw_ops csid_ops_4_1;
+extern const struct csid_hw_ops csid_ops_4_7;
+
#endif /* QC_MSM_CAMSS_CSID_H */
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 09/22] media: camss: Add support for CSID hardware version Titan 170
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (6 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 08/22] media: camss: Refactor CSID HW version support Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 10/22] media: camss: Add support for CSIPHY " Robert Foss
` (12 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Add register definitions for version 170 of the Titan architecture
and implement support for the CSID subdevice.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
drivers/media/platform/qcom/camss/Makefile | 1 +
.../platform/qcom/camss/camss-csid-170.c | 602 ++++++++++++++++++
.../media/platform/qcom/camss/camss-csid.c | 4 +
.../media/platform/qcom/camss/camss-csid.h | 2 +
.../media/platform/qcom/camss/camss-vfe-170.c | 1 -
drivers/media/platform/qcom/camss/camss.c | 62 ++
6 files changed, 671 insertions(+), 1 deletion(-)
create mode 100644 drivers/media/platform/qcom/camss/camss-csid-170.c
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index cff388b653ba..0752c46ea37b 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -6,6 +6,7 @@ qcom-camss-objs += \
camss-csid.o \
camss-csid-4-1.o \
camss-csid-4-7.o \
+ camss-csid-170.o \
camss-csiphy-2ph-1-0.o \
camss-csiphy-3ph-1-0.o \
camss-csiphy.o \
diff --git a/drivers/media/platform/qcom/camss/camss-csid-170.c b/drivers/media/platform/qcom/camss/camss-csid-170.c
new file mode 100644
index 000000000000..0e9b08ed38c2
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-csid-170.c
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-csid-4-7.c
+ *
+ * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module
+ *
+ * Copyright (C) 2020 Linaro Ltd.
+ */
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+
+#include "camss-csid.h"
+#include "camss.h"
+
+/* The CSID 2 IP-block is different from the others,
+ * and is of a bare-bones Lite version, with no PIX
+ * interface support. As a result of that it has an
+ * alternate register layout.
+ */
+#define IS_LITE (csid->id == 2 ? 1 : 0)
+
+#define CSID_HW_VERSION 0x0
+#define HW_VERSION_STEPPING 0
+#define HW_VERSION_REVISION 16
+#define HW_VERSION_GENERATION 28
+
+#define CSID_RST_STROBES 0x10
+#define RST_STROBES 0
+
+#define CSID_CSI2_RX_IRQ_STATUS 0x20
+#define CSID_CSI2_RX_IRQ_MASK 0x24
+#define CSID_CSI2_RX_IRQ_CLEAR 0x28
+
+#define CSID_CSI2_RDIN_IRQ_STATUS(rdi) ((IS_LITE ? 0x30 : 0x40) \
+ + 0x10 * (rdi))
+#define CSID_CSI2_RDIN_IRQ_MASK(rdi) ((IS_LITE ? 0x34 : 0x44) \
+ + 0x10 * (rdi))
+#define CSID_CSI2_RDIN_IRQ_CLEAR(rdi) ((IS_LITE ? 0x38 : 0x48) \
+ + 0x10 * (rdi))
+#define CSID_CSI2_RDIN_IRQ_SET(rdi) ((IS_LITE ? 0x3C : 0x4C) \
+ + 0x10 * (rdi))
+
+#define CSID_TOP_IRQ_STATUS 0x70
+#define TOP_IRQ_STATUS_RESET_DONE 0
+#define CSID_TOP_IRQ_MASK 0x74
+#define CSID_TOP_IRQ_CLEAR 0x78
+#define CSID_TOP_IRQ_SET 0x7C
+#define CSID_IRQ_CMD 0x80
+#define IRQ_CMD_CLEAR 0
+#define IRQ_CMD_SET 4
+
+#define CSID_CSI2_RX_CFG0 0x100
+#define CSI2_RX_CFG0_NUM_ACTIVE_LANES 0
+#define CSI2_RX_CFG0_DL0_INPUT_SEL 4
+#define CSI2_RX_CFG0_DL1_INPUT_SEL 8
+#define CSI2_RX_CFG0_DL2_INPUT_SEL 12
+#define CSI2_RX_CFG0_DL3_INPUT_SEL 16
+#define CSI2_RX_CFG0_PHY_NUM_SEL 20
+#define CSI2_RX_CFG0_PHY_TYPE_SEL 24
+
+#define CSID_CSI2_RX_CFG1 0x104
+#define CSI2_RX_CFG1_PACKET_ECC_CORRECTION_EN 0
+#define CSI2_RX_CFG1_DE_SCRAMBLE_EN 1
+#define CSI2_RX_CFG1_VC_MODE 2
+#define CSI2_RX_CFG1_COMPLETE_STREAM_EN 4
+#define CSI2_RX_CFG1_COMPLETE_STREAM_FRAME_TIMING 5
+#define CSI2_RX_CFG1_MISR_EN 6
+#define CSI2_RX_CFG1_CGC_MODE 7
+#define CGC_MODE_DYNAMIC_GATING 0
+#define CGC_MODE_ALWAYS_ON 1
+
+#define CSID_RDI_CFG0(rdi) ((IS_LITE ? 0x200 : 0x300) \
+ + 0x100 * (rdi))
+#define RDI_CFG0_BYTE_CNTR_EN 0
+#define RDI_CFG0_FORMAT_MEASURE_EN 1
+#define RDI_CFG0_TIMESTAMP_EN 2
+#define RDI_CFG0_DROP_H_EN 3
+#define RDI_CFG0_DROP_V_EN 4
+#define RDI_CFG0_CROP_H_EN 5
+#define RDI_CFG0_CROP_V_EN 6
+#define RDI_CFG0_MISR_EN 7
+#define RDI_CFG0_CGC_MODE 8
+#define CGC_MODE_DYNAMIC 0
+#define CGC_MODE_ALWAYS_ON 1
+#define RDI_CFG0_PLAIN_ALIGNMENT 9
+#define PLAIN_ALIGNMENT_LSB 0
+#define PLAIN_ALIGNMENT_MSB 1
+#define RDI_CFG0_PLAIN_FORMAT 10
+#define RDI_CFG0_DECODE_FORMAT 12
+#define RDI_CFG0_DATA_TYPE 16
+#define RDI_CFG0_VIRTUAL_CHANNEL 22
+#define RDI_CFG0_DT_ID 27
+#define RDI_CFG0_EARLY_EOF_EN 29
+#define RDI_CFG0_PACKING_FORMAT 30
+#define RDI_CFG0_ENABLE 31
+
+#define CSID_RDI_CFG1(rdi) ((IS_LITE ? 0x204 : 0x304)\
+ + 0x100 * (rdi))
+#define RDI_CFG1_TIMESTAMP_STB_SEL 0
+
+#define CSID_RDI_CTRL(rdi) ((IS_LITE ? 0x208 : 0x308)\
+ + 0x100 * (rdi))
+#define RDI_CTRL_HALT_CMD 0
+#define ALT_CMD_RESUME_AT_FRAME_BOUNDARY 1
+#define RDI_CTRL_HALT_MODE 2
+
+#define CSID_RDI_FRM_DROP_PATTERN(rdi) ((IS_LITE ? 0x20C : 0x30C)\
+ + 0x100 * (rdi))
+#define CSID_RDI_FRM_DROP_PERIOD(rdi) ((IS_LITE ? 0x210 : 0x310)\
+ + 0x100 * (rdi))
+#define CSID_RDI_IRQ_SUBSAMPLE_PATTERN(rdi) ((IS_LITE ? 0x214 : 0x314)\
+ + 0x100 * (rdi))
+#define CSID_RDI_IRQ_SUBSAMPLE_PERIOD(rdi) ((IS_LITE ? 0x218 : 0x318)\
+ + 0x100 * (rdi))
+#define CSID_RDI_RPP_PIX_DROP_PATTERN(rdi) ((IS_LITE ? 0x224 : 0x324)\
+ + 0x100 * (rdi))
+#define CSID_RDI_RPP_PIX_DROP_PERIOD(rdi) ((IS_LITE ? 0x228 : 0x328)\
+ + 0x100 * (rdi))
+#define CSID_RDI_RPP_LINE_DROP_PATTERN(rdi) ((IS_LITE ? 0x22C : 0x32C)\
+ + 0x100 * (rdi))
+#define CSID_RDI_RPP_LINE_DROP_PERIOD(rdi) ((IS_LITE ? 0x230 : 0x330)\
+ + 0x100 * (rdi))
+
+#define CSID_TPG_CTRL 0x600
+#define TPG_CTRL_TEST_EN 0
+#define TPG_CTRL_FS_PKT_EN 1
+#define TPG_CTRL_FE_PKT_EN 2
+#define TPG_CTRL_NUM_ACTIVE_LANES 4
+#define TPG_CTRL_CYCLES_BETWEEN_PKTS 8
+#define TPG_CTRL_NUM_TRAIL_BYTES 20
+
+#define CSID_TPG_VC_CFG0 0x604
+#define TPG_VC_CFG0_VC_NUM 0
+#define TPG_VC_CFG0_NUM_ACTIVE_SLOTS 8
+#define NUM_ACTIVE_SLOTS_0_ENABLED 0
+#define NUM_ACTIVE_SLOTS_0_1_ENABLED 1
+#define NUM_ACTIVE_SLOTS_0_1_2_ENABLED 2
+#define NUM_ACTIVE_SLOTS_0_1_3_ENABLED 3
+#define TPG_VC_CFG0_LINE_INTERLEAVING_MODE 10
+#define INTELEAVING_MODE_INTERLEAVED 0
+#define INTELEAVING_MODE_ONE_SHOT 1
+#define TPG_VC_CFG0_NUM_FRAMES 16
+
+#define CSID_TPG_VC_CFG1 0x608
+#define TPG_VC_CFG1_H_BLANKING_COUNT 0
+#define TPG_VC_CFG1_V_BLANKING_COUNT 12
+#define TPG_VC_CFG1_V_BLANK_FRAME_WIDTH_SEL 24
+
+#define CSID_TPG_LFSR_SEED 0x60C
+
+#define CSID_TPG_DT_n_CFG_0(n) (0x610 + (n) * 0xC)
+#define TPG_DT_n_CFG_0_FRAME_HEIGHT 0
+#define TPG_DT_n_CFG_0_FRAME_WIDTH 16
+
+#define CSID_TPG_DT_n_CFG_1(n) (0x614 + (n) * 0xC)
+#define TPG_DT_n_CFG_1_DATA_TYPE 0
+#define TPG_DT_n_CFG_1_ECC_XOR_MASK 8
+#define TPG_DT_n_CFG_1_CRC_XOR_MASK 16
+
+#define CSID_TPG_DT_n_CFG_2(n) (0x618 + (n) * 0xC)
+#define TPG_DT_n_CFG_2_PAYLOAD_MODE 0
+#define TPG_DT_n_CFG_2_USER_SPECIFIED_PAYLOAD 4
+#define TPG_DT_n_CFG_2_ENCODE_FORMAT 16
+
+#define CSID_TPG_COLOR_BARS_CFG 0x640
+#define TPG_COLOR_BARS_CFG_UNICOLOR_BAR_EN 0
+#define TPG_COLOR_BARS_CFG_UNICOLOR_BAR_SEL 4
+#define TPG_COLOR_BARS_CFG_SPLIT_EN 5
+#define TPG_COLOR_BARS_CFG_ROTATE_PERIOD 8
+
+#define CSID_TPG_COLOR_BOX_CFG 0x644
+#define TPG_COLOR_BOX_CFG_MODE 0
+#define TPG_COLOR_BOX_PATTERN_SEL 2
+
+
+static const struct csid_format csid_formats[] = {
+ {
+ MEDIA_BUS_FMT_UYVY8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_VYUY8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_YUYV8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_YVYU8_2X8,
+ DATA_TYPE_YUV422_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 2,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB8_1X8,
+ DATA_TYPE_RAW_8BIT,
+ DECODE_FORMAT_UNCOMPRESSED_8_BIT,
+ 8,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_Y10_1X10,
+ DATA_TYPE_RAW_10BIT,
+ DECODE_FORMAT_UNCOMPRESSED_10_BIT,
+ 10,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB12_1X12,
+ DATA_TYPE_RAW_12BIT,
+ DECODE_FORMAT_UNCOMPRESSED_12_BIT,
+ 12,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SBGGR14_1X14,
+ DATA_TYPE_RAW_14BIT,
+ DECODE_FORMAT_UNCOMPRESSED_14_BIT,
+ 14,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGBRG14_1X14,
+ DATA_TYPE_RAW_14BIT,
+ DECODE_FORMAT_UNCOMPRESSED_14_BIT,
+ 14,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SGRBG14_1X14,
+ DATA_TYPE_RAW_14BIT,
+ DECODE_FORMAT_UNCOMPRESSED_14_BIT,
+ 14,
+ 1,
+ },
+ {
+ MEDIA_BUS_FMT_SRGGB14_1X14,
+ DATA_TYPE_RAW_14BIT,
+ DECODE_FORMAT_UNCOMPRESSED_14_BIT,
+ 14,
+ 1,
+ },
+};
+
+static void csid_configure_stream(struct csid_device *csid, u8 enable)
+{
+ struct csid_testgen_config *tg = &csid->testgen;
+ u32 val;
+ u32 phy_sel = 0;
+ u8 lane_cnt = csid->phy.lane_cnt;
+ struct v4l2_mbus_framefmt *input_format =
+ &csid->fmt[MSM_CSID_PAD_SRC];
+ const struct csid_format *format = csid_get_fmt_entry(
+ csid->formats, csid->nformats, input_format->code);
+ if (!lane_cnt)
+ lane_cnt = 4;
+
+ if (!tg->enabled)
+ phy_sel = csid->phy.csiphy_id;
+
+ if (enable) {
+ u8 vc = 0; /* Virtual Channel 0 */
+ u8 dt_id = vc * 4;
+
+ if (tg->enabled) {
+ /* Config Test Generator */
+ vc = 0xa;
+
+ /* configure one DT, infinite frames */
+ val = vc << TPG_VC_CFG0_VC_NUM;
+ val |= INTELEAVING_MODE_ONE_SHOT << TPG_VC_CFG0_LINE_INTERLEAVING_MODE;
+ val |= 0 << TPG_VC_CFG0_NUM_FRAMES;
+ writel_relaxed(val, csid->base + CSID_TPG_VC_CFG0);
+
+ val = 0x740 << TPG_VC_CFG1_H_BLANKING_COUNT;
+ val |= 0x3ff << TPG_VC_CFG1_V_BLANKING_COUNT;
+ writel_relaxed(val, csid->base + CSID_TPG_VC_CFG1);
+
+ writel_relaxed(0x12345678, csid->base + CSID_TPG_LFSR_SEED);
+
+ val = input_format->height & 0x1fff << TPG_DT_n_CFG_0_FRAME_HEIGHT;
+ val |= input_format->width & 0x1fff << TPG_DT_n_CFG_0_FRAME_WIDTH;
+ writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_0(0));
+
+ val = DATA_TYPE_RAW_10BIT << TPG_DT_n_CFG_1_DATA_TYPE;
+ writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_1(0));
+
+ val = tg->mode << TPG_DT_n_CFG_2_PAYLOAD_MODE;
+ val |= 0xBE << TPG_DT_n_CFG_2_USER_SPECIFIED_PAYLOAD;
+ val |= format->decode_format << TPG_DT_n_CFG_2_ENCODE_FORMAT;
+ writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_2(0));
+
+ writel_relaxed(0, csid->base + CSID_TPG_COLOR_BARS_CFG);
+
+ writel_relaxed(0, csid->base + CSID_TPG_COLOR_BOX_CFG);
+ }
+
+ val = 1 << RDI_CFG0_BYTE_CNTR_EN;
+ val |= 1 << RDI_CFG0_FORMAT_MEASURE_EN;
+ val |= 1 << RDI_CFG0_TIMESTAMP_EN;
+ val |= DECODE_FORMAT_PAYLOAD_ONLY << RDI_CFG0_DECODE_FORMAT;
+ val |= DATA_TYPE_RAW_10BIT << RDI_CFG0_DATA_TYPE;
+ val |= vc << RDI_CFG0_VIRTUAL_CHANNEL;
+ val |= dt_id << RDI_CFG0_DT_ID;
+ writel_relaxed(val, csid->base + CSID_RDI_CFG0(0));
+
+ /* CSID_TIMESTAMP_STB_POST_IRQ */
+ val = 2 << RDI_CFG1_TIMESTAMP_STB_SEL;
+ writel_relaxed(val, csid->base + CSID_RDI_CFG1(0));
+
+ val = 1;
+ writel_relaxed(val, csid->base + CSID_RDI_FRM_DROP_PERIOD(0));
+
+ val = 0;
+ writel_relaxed(0, csid->base + CSID_RDI_FRM_DROP_PATTERN(0));
+
+ val = 1;
+ writel_relaxed(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PERIOD(0));
+
+ val = 0;
+ writel_relaxed(val, csid->base + CSID_RDI_IRQ_SUBSAMPLE_PATTERN(0));
+
+ val = 1;
+ writel_relaxed(val, csid->base + CSID_RDI_RPP_PIX_DROP_PERIOD(0));
+
+ val = 0;
+ writel_relaxed(val, csid->base + CSID_RDI_RPP_PIX_DROP_PATTERN(0));
+
+ val = 1;
+ writel_relaxed(val, csid->base + CSID_RDI_RPP_LINE_DROP_PERIOD(0));
+
+ val = 0;
+ writel_relaxed(val, csid->base + CSID_RDI_RPP_LINE_DROP_PATTERN(0));
+
+ val = 0;
+ writel_relaxed(val, csid->base + CSID_RDI_CTRL(0));
+
+ val = readl_relaxed(csid->base + CSID_RDI_CFG0(0));
+ val |= 1 << RDI_CFG0_ENABLE;
+ writel_relaxed(val, csid->base + CSID_RDI_CFG0(0));
+ }
+
+ if (tg->enabled) {
+ val = enable << TPG_CTRL_TEST_EN;
+ val |= 1 << TPG_CTRL_FS_PKT_EN;
+ val |= 1 << TPG_CTRL_FE_PKT_EN;
+ val |= (lane_cnt - 1) << TPG_CTRL_NUM_ACTIVE_LANES;
+ val |= 0x64 << TPG_CTRL_CYCLES_BETWEEN_PKTS;
+ val |= 0xA << TPG_CTRL_NUM_TRAIL_BYTES;
+ writel_relaxed(val, csid->base + CSID_TPG_CTRL);
+ }
+
+ val = (lane_cnt - 1) << CSI2_RX_CFG0_NUM_ACTIVE_LANES;
+ val |= csid->phy.lane_assign << CSI2_RX_CFG0_DL0_INPUT_SEL;
+ val |= phy_sel << CSI2_RX_CFG0_PHY_NUM_SEL;
+ writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG0);
+
+
+ val = 1 << CSI2_RX_CFG1_PACKET_ECC_CORRECTION_EN;
+ val |= 1 << CSI2_RX_CFG1_MISR_EN;
+ writel_relaxed(val, csid->base + CSID_CSI2_RX_CFG1); // csi2_vc_mode_shift_val ?
+
+ /* error irqs start at BIT(11) */
+ writel_relaxed(~0u, csid->base + CSID_CSI2_RX_IRQ_MASK);
+
+ /* RDI irq */
+ writel_relaxed(~0u, csid->base + CSID_TOP_IRQ_MASK);
+
+ val = 1 << RDI_CTRL_HALT_CMD;
+ writel_relaxed(val, csid->base + CSID_RDI_CTRL(0));
+}
+
+static int csid_configure_testgen_pattern(struct csid_device *csid, s32 val)
+{
+ s32 regval = val - 1;
+
+ if (regval > 0 || regval <= CSID_PAYLOAD_MODE_MAX_SUPPORTED_170)
+ csid->testgen.mode = regval;
+
+ return 0;
+}
+
+/*
+ * csid_hw_version - CSID hardware version query
+ * @csid: CSID device
+ *
+ * Return HW version or error
+ */
+static u32 csid_hw_version(struct csid_device *csid)
+{
+ u32 hw_version;
+ u32 hw_gen;
+ u32 hw_rev;
+ u32 hw_step;
+
+ hw_version = readl_relaxed(csid->base + CSID_HW_VERSION);
+ hw_gen = (hw_version >> HW_VERSION_GENERATION) & 0xF;
+ hw_rev = (hw_version >> HW_VERSION_REVISION) & 0xFFF;
+ hw_step = (hw_version >> HW_VERSION_STEPPING) & 0xFFFF;
+ dev_dbg(csid->camss->dev, "CSID HW Version = %u.%u.%u\n",
+ hw_gen, hw_rev, hw_step);
+
+ return hw_version;
+}
+
+/*
+ * csid_isr - CSID module interrupt service routine
+ * @irq: Interrupt line
+ * @dev: CSID device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t csid_isr(int irq, void *dev)
+{
+ struct csid_device *csid = dev;
+ u32 val;
+ u8 reset_done;
+
+ val = readl_relaxed(csid->base + CSID_TOP_IRQ_STATUS);
+ writel_relaxed(val, csid->base + CSID_TOP_IRQ_CLEAR);
+ reset_done = val & BIT(TOP_IRQ_STATUS_RESET_DONE);
+
+ val = readl_relaxed(csid->base + CSID_CSI2_RX_IRQ_STATUS);
+ writel_relaxed(val, csid->base + CSID_CSI2_RX_IRQ_CLEAR);
+
+ val = readl_relaxed(csid->base + CSID_CSI2_RDIN_IRQ_STATUS(0));
+ writel_relaxed(val, csid->base + CSID_CSI2_RDIN_IRQ_CLEAR(0));
+
+ val = 1 << IRQ_CMD_CLEAR;
+ writel_relaxed(val, csid->base + CSID_IRQ_CMD);
+
+ if (reset_done)
+ complete(&csid->reset_complete);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * csid_reset - Trigger reset on CSID module and wait to complete
+ * @csid: CSID device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csid_reset(struct csid_device *csid)
+{
+ unsigned long time;
+ u32 val;
+
+ reinit_completion(&csid->reset_complete);
+
+ writel_relaxed(1, csid->base + CSID_TOP_IRQ_CLEAR);
+ writel_relaxed(1, csid->base + CSID_IRQ_CMD);
+ writel_relaxed(1, csid->base + CSID_TOP_IRQ_MASK);
+ writel_relaxed(1, csid->base + CSID_IRQ_CMD);
+
+ /* preserve registers */
+ val = 0x1e << RST_STROBES;
+ writel_relaxed(val, csid->base + CSID_RST_STROBES);
+
+ time = wait_for_completion_timeout(&csid->reset_complete,
+ msecs_to_jiffies(CSID_RESET_TIMEOUT_MS));
+ if (!time) {
+ dev_err(csid->camss->dev, "CSID reset timeout\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static u32 csid_src_pad_code(struct csid_device *csid, u32 sink_code,
+ unsigned int match_format_idx, u32 match_code)
+{
+ switch (sink_code) {
+ case MEDIA_BUS_FMT_SBGGR10_1X10:
+ {
+ u32 src_code[] = {
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+ MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE,
+ };
+
+ return csid_find_code(src_code, ARRAY_SIZE(src_code),
+ match_format_idx, match_code);
+ }
+ case MEDIA_BUS_FMT_Y10_1X10:
+ {
+ u32 src_code[] = {
+ MEDIA_BUS_FMT_Y10_1X10,
+ MEDIA_BUS_FMT_Y10_2X8_PADHI_LE,
+ };
+
+ return csid_find_code(src_code, ARRAY_SIZE(src_code),
+ match_format_idx, match_code);
+ }
+ default:
+ if (match_format_idx > 0)
+ return 0;
+
+ return sink_code;
+ }
+}
+
+static void csid_subdev_init(struct csid_device *csid)
+{
+ csid->formats = csid_formats;
+ csid->nformats = ARRAY_SIZE(csid_formats);
+ csid->testgen.modes = csid_testgen_modes;
+ csid->testgen.nmodes = CSID_PAYLOAD_MODE_MAX_SUPPORTED_170;
+}
+
+const struct csid_hw_ops csid_ops_170 = {
+ .configure_stream = csid_configure_stream,
+ .configure_testgen_pattern = csid_configure_testgen_pattern,
+ .hw_version = csid_hw_version,
+ .isr = csid_isr,
+ .reset = csid_reset,
+ .src_pad_code = csid_src_pad_code,
+ .subdev_init = csid_subdev_init,
+};
diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
index 601bd810f2b0..294a0a9e4dfa 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.c
+++ b/drivers/media/platform/qcom/camss/camss-csid.c
@@ -123,6 +123,8 @@ static int csid_set_clock_rates(struct csid_device *csid)
dev_err(dev, "clk set rate failed: %d\n", ret);
return ret;
}
+ } else if (clock->nfreqs) {
+ clk_set_rate(clock->clk, clock->freq[0]);
}
}
@@ -544,6 +546,8 @@ int msm_csid_subdev_init(struct camss *camss, struct csid_device *csid,
} else if (camss->version == CAMSS_8x96 ||
camss->version == CAMSS_660) {
csid->ops = &csid_ops_4_7;
+ } else if (camss->version == CAMSS_845) {
+ csid->ops = &csid_ops_170;
} else {
return -EINVAL;
}
diff --git a/drivers/media/platform/qcom/camss/camss-csid.h b/drivers/media/platform/qcom/camss/camss-csid.h
index d40194e2bed3..49a6b5492403 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.h
+++ b/drivers/media/platform/qcom/camss/camss-csid.h
@@ -245,5 +245,7 @@ void msm_csid_get_csid_id(struct media_entity *entity, u8 *id);
extern const struct csid_hw_ops csid_ops_4_1;
extern const struct csid_hw_ops csid_ops_4_7;
+extern const struct csid_hw_ops csid_ops_170;
+
#endif /* QC_MSM_CAMSS_CSID_H */
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
index b8ac3a137c8a..9d3e1c83ac14 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-170.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
@@ -277,7 +277,6 @@ static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
writel_relaxed(val, vfe->base + VFE_BUS_WM_PACKER_CFG(wm)); // XXX 1 for PLAIN8?
/* Configure stride for RDIs */
- //val = pix->plane_fmt[0].bytesperline;
val = WM_STRIDE_DEFAULT_STRIDE;
writel_relaxed(val, vfe->base + VFE_BUS_WM_STRIDE(wm));
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index d710073e47a3..05bed6da76aa 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -465,6 +465,68 @@ static const struct resources vfe_res_660[] = {
}
};
+static const struct resources csid_res_845[] = {
+ /* CSID0 */
+ {
+ .regulator = { "vdda-csi0" },
+ .clock = { "cpas_ahb", "cphy_rx_src", "slow_ahb_src",
+ "soc_ahb", "vfe0", "vfe0_src",
+ "vfe0_cphy_rx", "csi0",
+ "csi0_src" },
+ .clock_rate = { { 0 },
+ { 384000000 },
+ { 80000000 },
+ { 0 },
+ { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
+ { 320000000 },
+ { 0 },
+ { 19200000, 75000000, 384000000, 538666667 },
+ { 384000000 } },
+ .reg = { "csid0" },
+ .interrupt = { "csid0" }
+ },
+
+ /* CSID1 */
+ {
+ .regulator = { "vdda-csi1" },
+ .clock = { "cpas_ahb", "cphy_rx_src", "slow_ahb_src",
+ "soc_ahb", "vfe1", "vfe1_src",
+ "vfe1_cphy_rx", "csi1",
+ "csi1_src" },
+ .clock_rate = { { 0 },
+ { 384000000 },
+ { 80000000 },
+ { 0 },
+ { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
+ { 320000000 },
+ { 0 },
+ { 19200000, 75000000, 384000000, 538666667 },
+ { 384000000 } },
+ .reg = { "csid1" },
+ .interrupt = { "csid1" }
+ },
+
+ /* CSID2 */
+ {
+ .regulator = { "vdda-csi2" },
+ .clock = { "cpas_ahb", "cphy_rx_src", "slow_ahb_src",
+ "soc_ahb", "vfe_lite", "vfe_lite_src",
+ "vfe_lite_cphy_rx", "csi2",
+ "csi2_src" },
+ .clock_rate = { { 0 },
+ { 384000000 },
+ { 80000000 },
+ { 0 },
+ { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
+ { 320000000 },
+ { 0 },
+ { 19200000, 75000000, 384000000, 538666667 },
+ { 384000000 } },
+ .reg = { "csid2" },
+ .interrupt = { "csid2" }
+ }
+};
+
static const struct resources vfe_res_845[] = {
/* VFE0 */
{
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 10/22] media: camss: Add support for CSIPHY hardware version Titan 170
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (7 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 09/22] media: camss: Add support for CSID hardware version Titan 170 Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 11/22] media: camss: Remove per VFE power domain toggling Robert Foss
` (11 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Add register definitions for version 170 of the Titan architecture
and implement support for the CSIPHY subdevice.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
.../qcom/camss/camss-csiphy-3ph-1-0.c | 182 ++++++++++++++++--
.../media/platform/qcom/camss/camss-csiphy.c | 66 +++++--
drivers/media/platform/qcom/camss/camss.c | 74 +++++++
3 files changed, 290 insertions(+), 32 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index 97cb9de85031..8cf1440b7d70 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -47,6 +47,105 @@
#define CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_SHOW_REV_ID BIT(1)
#define CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(n) (0x8b0 + 0x4 * (n))
+#define CSIPHY_DEFAULT_PARAMS 0
+#define CSIPHY_LANE_ENABLE 1
+#define CSIPHY_SETTLE_CNT_LOWER_BYTE 2
+#define CSIPHY_SETTLE_CNT_HIGHER_BYTE 3
+#define CSIPHY_DNP_PARAMS 4
+#define CSIPHY_2PH_REGS 5
+#define CSIPHY_3PH_REGS 6
+
+struct csiphy_reg_t {
+ int32_t reg_addr;
+ int32_t reg_data;
+ int32_t delay;
+ uint32_t csiphy_param_type;
+};
+
+static struct
+csiphy_reg_t lane_regs_sdm845[5][14] = {
+ {
+ {0x0004, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x002C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0034, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x001C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0014, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0028, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x003C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0000, 0x91, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0008, 0x00, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x000c, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0010, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0038, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0060, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0064, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0704, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x072C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0734, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x071C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0714, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0728, 0x04, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x073C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0700, 0x80, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0708, 0x14, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x070C, 0xA5, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0710, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0738, 0x1F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0760, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0764, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0204, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x022C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0234, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x021C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0214, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0228, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x023C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0200, 0x91, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0208, 0x00, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x020C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0210, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0238, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0260, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0264, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0404, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x042C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0434, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x041C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0414, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0428, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x043C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0400, 0x91, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0408, 0x00, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x040C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0410, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0438, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0460, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0464, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+ {
+ {0x0604, 0x0C, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x062C, 0x01, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0634, 0x0F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x061C, 0x0A, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0614, 0x60, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0628, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x063C, 0xB8, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0600, 0x91, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0608, 0x00, 0x00, CSIPHY_SETTLE_CNT_LOWER_BYTE},
+ {0x060C, 0x00, 0x00, CSIPHY_DNP_PARAMS},
+ {0x0610, 0x52, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0638, 0xFE, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0660, 0x00, 0x00, CSIPHY_DEFAULT_PARAMS},
+ {0x0664, 0x7F, 0x00, CSIPHY_DEFAULT_PARAMS},
+ },
+};
+
static void csiphy_hw_version_read(struct csiphy_device *csiphy,
struct device *dev)
{
@@ -135,26 +234,13 @@ static u8 csiphy_settle_cnt_calc(u32 pixel_clock, u8 bpp, u8 num_lanes,
return settle_cnt;
}
-static void csiphy_lanes_enable(struct csiphy_device *csiphy,
- struct csiphy_config *cfg,
- u32 pixel_clock, u8 bpp, u8 lane_mask)
+static void csiphy_gen1_config_lanes(struct csiphy_device *csiphy,
+ struct csiphy_config *cfg,
+ u8 settle_cnt)
{
struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg;
- u8 settle_cnt;
- u8 val, l = 0;
- int i;
-
- settle_cnt = csiphy_settle_cnt_calc(pixel_clock, bpp, c->num_data,
- csiphy->timer_clk_rate);
-
- val = BIT(c->clk.pos);
- for (i = 0; i < c->num_data; i++)
- val |= BIT(c->data[i].pos * 2);
-
- writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(5));
-
- val = CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_COMMON_PWRDN_B;
- writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(6));
+ int i, l = 0;
+ u8 val;
for (i = 0; i <= c->num_data; i++) {
if (i == c->num_data)
@@ -208,6 +294,66 @@ static void csiphy_lanes_enable(struct csiphy_device *csiphy,
val = CSIPHY_3PH_LNn_MISC1_IS_CLKLANE;
writel_relaxed(val, csiphy->base + CSIPHY_3PH_LNn_MISC1(l));
+}
+
+static void csiphy_gen2_config_lanes(struct csiphy_device *csiphy,
+ u8 settle_cnt)
+{
+ int i, l;
+ u32 val;
+
+ for (l = 0; l < 5; l++) {
+ for (i = 0; i < 14; i++) {
+ struct csiphy_reg_t *r = &lane_regs_sdm845[l][i];
+
+ switch (r->csiphy_param_type) {
+ case CSIPHY_SETTLE_CNT_LOWER_BYTE:
+ val = settle_cnt & 0xff;
+ break;
+ case CSIPHY_DNP_PARAMS:
+ continue;
+ default:
+ val = r->reg_data;
+ break;
+ }
+ writel_relaxed(val, csiphy->base + r->reg_addr);
+ }
+ }
+}
+
+static void csiphy_lanes_enable(struct csiphy_device *csiphy,
+ struct csiphy_config *cfg,
+ u32 pixel_clock, u8 bpp, u8 lane_mask)
+{
+ struct csiphy_lanes_cfg *c = &cfg->csi2->lane_cfg;
+ u8 settle_cnt;
+ u8 val;
+ int i;
+
+ settle_cnt = csiphy_settle_cnt_calc(pixel_clock, bpp, c->num_data,
+ csiphy->timer_clk_rate);
+
+ val = BIT(c->clk.pos);
+ for (i = 0; i < c->num_data; i++)
+ val |= BIT(c->data[i].pos * 2);
+
+ val = 0xd5;
+ writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(5));
+
+ val = 1;
+ writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(6));
+
+ val = 0x02;
+ writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(7));
+
+ val = 0x00;
+ writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(0));
+
+ if (csiphy->camss->version == CAMSS_8x16 ||
+ csiphy->camss->version == CAMSS_8x96)
+ csiphy_gen1_config_lanes(csiphy, cfg, settle_cnt);
+ else if (csiphy->camss->version == CAMSS_845)
+ csiphy_gen2_config_lanes(csiphy, settle_cnt);
val = 0xff;
writel_relaxed(val, csiphy->base + CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(11));
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
index 509c9a59c09c..e3fdc268050c 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
@@ -73,6 +73,30 @@ static const struct csiphy_format csiphy_formats_8x96[] = {
{ MEDIA_BUS_FMT_Y10_1X10, 10 },
};
+static const struct csiphy_format csiphy_formats_sdm845[] = {
+ { MEDIA_BUS_FMT_UYVY8_2X8, 8 },
+ { MEDIA_BUS_FMT_VYUY8_2X8, 8 },
+ { MEDIA_BUS_FMT_YUYV8_2X8, 8 },
+ { MEDIA_BUS_FMT_YVYU8_2X8, 8 },
+ { MEDIA_BUS_FMT_SBGGR8_1X8, 8 },
+ { MEDIA_BUS_FMT_SGBRG8_1X8, 8 },
+ { MEDIA_BUS_FMT_SGRBG8_1X8, 8 },
+ { MEDIA_BUS_FMT_SRGGB8_1X8, 8 },
+ { MEDIA_BUS_FMT_SBGGR10_1X10, 10 },
+ { MEDIA_BUS_FMT_SGBRG10_1X10, 10 },
+ { MEDIA_BUS_FMT_SGRBG10_1X10, 10 },
+ { MEDIA_BUS_FMT_SRGGB10_1X10, 10 },
+ { MEDIA_BUS_FMT_SBGGR12_1X12, 12 },
+ { MEDIA_BUS_FMT_SGBRG12_1X12, 12 },
+ { MEDIA_BUS_FMT_SGRBG12_1X12, 12 },
+ { MEDIA_BUS_FMT_SRGGB12_1X12, 12 },
+ { MEDIA_BUS_FMT_SBGGR14_1X14, 14 },
+ { MEDIA_BUS_FMT_SGBRG14_1X14, 14 },
+ { MEDIA_BUS_FMT_SGRBG14_1X14, 14 },
+ { MEDIA_BUS_FMT_SRGGB14_1X14, 14 },
+ { MEDIA_BUS_FMT_Y10_1X10, 10 },
+};
+
/*
* csiphy_get_bpp - map media bus format to bits per pixel
* @formats: supported media bus formats array
@@ -257,16 +281,20 @@ static int csiphy_stream_on(struct csiphy_device *csiphy)
return -EINVAL;
}
- val = readl_relaxed(csiphy->base_clk_mux);
- if (cfg->combo_mode && (lane_mask & 0x18) == 0x18) {
- val &= ~0xf0;
- val |= cfg->csid_id << 4;
- } else {
- val &= ~0xf;
- val |= cfg->csid_id;
+ if (csiphy->base_clk_mux) {
+ val = readl_relaxed(csiphy->base_clk_mux);
+ if (cfg->combo_mode && (lane_mask & 0x18) == 0x18) {
+ val &= ~0xf0;
+ val |= cfg->csid_id << 4;
+ } else {
+ val &= ~0xf;
+ val |= cfg->csid_id;
+ }
+ writel_relaxed(val, csiphy->base_clk_mux);
+
+ /* Enforce reg write ordering between clk mux & lane enabling */
+ wmb();
}
- writel_relaxed(val, csiphy->base_clk_mux);
- wmb();
csiphy->ops->lanes_enable(csiphy, cfg, pixel_clock, bpp, lane_mask);
@@ -557,6 +585,10 @@ int msm_csiphy_subdev_init(struct camss *camss,
csiphy->ops = &csiphy_ops_3ph_1_0;
csiphy->formats = csiphy_formats_8x96;
csiphy->nformats = ARRAY_SIZE(csiphy_formats_8x96);
+ } else if (camss->version == CAMSS_845) {
+ csiphy->ops = &csiphy_ops_3ph_1_0;
+ csiphy->formats = csiphy_formats_sdm845;
+ csiphy->nformats = ARRAY_SIZE(csiphy_formats_sdm845);
} else {
return -EINVAL;
}
@@ -570,11 +602,17 @@ int msm_csiphy_subdev_init(struct camss *camss,
return PTR_ERR(csiphy->base);
}
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[1]);
- csiphy->base_clk_mux = devm_ioremap_resource(dev, r);
- if (IS_ERR(csiphy->base_clk_mux)) {
- dev_err(dev, "could not map memory\n");
- return PTR_ERR(csiphy->base_clk_mux);
+ if (camss->version == CAMSS_8x16 ||
+ camss->version == CAMSS_8x96) {
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ res->reg[1]);
+ csiphy->base_clk_mux = devm_ioremap_resource(dev, r);
+ if (IS_ERR(csiphy->base_clk_mux)) {
+ dev_err(dev, "could not map memory\n");
+ return PTR_ERR(csiphy->base_clk_mux);
+ }
+ } else {
+ csiphy->base_clk_mux = NULL;
}
/* Interrupt */
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 05bed6da76aa..7e7763f04b58 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -465,6 +465,80 @@ static const struct resources vfe_res_660[] = {
}
};
+static const struct resources csiphy_res_845[] = {
+ /* CSIPHY0 */
+ {
+ .regulator = { NULL },
+ .clock = { "camnoc_axi", "soc_ahb", "slow_ahb_src",
+ "cpas_ahb", "cphy_rx_src", "csiphy0",
+ "csiphy0_timer_src", "csiphy0_timer" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 19200000, 240000000, 269333333 } },
+ .reg = { "csiphy0" },
+ .interrupt = { "csiphy0" }
+ },
+
+ /* CSIPHY1 */
+ {
+ .regulator = { NULL },
+ .clock = { "camnoc_axi", "soc_ahb", "slow_ahb_src",
+ "cpas_ahb", "cphy_rx_src", "csiphy1",
+ "csiphy1_timer_src", "csiphy1_timer" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 19200000, 240000000, 269333333 } },
+ .reg = { "csiphy1" },
+ .interrupt = { "csiphy1" }
+ },
+
+ /* CSIPHY2 */
+ {
+ .regulator = { NULL },
+ .clock = { "camnoc_axi", "soc_ahb", "slow_ahb_src",
+ "cpas_ahb", "cphy_rx_src", "csiphy2",
+ "csiphy2_timer_src", "csiphy2_timer" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 19200000, 240000000, 269333333 } },
+ .reg = { "csiphy2" },
+ .interrupt = { "csiphy2" }
+ },
+
+ /* CSIPHY3 */
+ {
+ .regulator = { NULL },
+ .clock = { "camnoc_axi", "soc_ahb", "slow_ahb_src",
+ "cpas_ahb", "cphy_rx_src", "csiphy3",
+ "csiphy3_timer_src", "csiphy3_timer" },
+ .clock_rate = { { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 19200000, 240000000, 269333333 } },
+ .reg = { "csiphy3" },
+ .interrupt = { "csiphy3" }
+ }
+};
+
static const struct resources csid_res_845[] = {
/* CSID0 */
{
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 11/22] media: camss: Remove per VFE power domain toggling
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (8 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 10/22] media: camss: Add support for CSIPHY " Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 12/22] media: camss: Enable SDM845 Robert Foss
` (10 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
For Titan ISPs clocks fail to re-enable during vfe_get()
after any vfe has been halted and its corresponding power
domain power has been detached.
Since all of the clocks depend on all of the PDs, per
VFE PD detaching is no option for this generation of HW.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
.../media/platform/qcom/camss/camss-ispif.c | 11 ---
drivers/media/platform/qcom/camss/camss-vfe.c | 7 --
drivers/media/platform/qcom/camss/camss.c | 94 +++++++++++--------
drivers/media/platform/qcom/camss/camss.h | 12 +--
4 files changed, 60 insertions(+), 64 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c
index c36570042082..e41925850ba2 100644
--- a/drivers/media/platform/qcom/camss/camss-ispif.c
+++ b/drivers/media/platform/qcom/camss/camss-ispif.c
@@ -323,14 +323,6 @@ static int ispif_reset(struct ispif_device *ispif, u8 vfe_id)
struct camss *camss = ispif->camss;
int ret;
- ret = camss_pm_domain_on(camss, PM_DOMAIN_VFE0);
- if (ret < 0)
- return ret;
-
- ret = camss_pm_domain_on(camss, PM_DOMAIN_VFE1);
- if (ret < 0)
- return ret;
-
ret = camss_enable_clocks(ispif->nclocks_for_reset,
ispif->clock_for_reset,
camss->dev);
@@ -343,9 +335,6 @@ static int ispif_reset(struct ispif_device *ispif, u8 vfe_id)
camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset);
- camss_pm_domain_off(camss, PM_DOMAIN_VFE0);
- camss_pm_domain_off(camss, PM_DOMAIN_VFE1);
-
return ret;
}
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index fa9629835e98..e41c22da4b9b 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -587,10 +587,6 @@ static int vfe_get(struct vfe_device *vfe)
mutex_lock(&vfe->power_lock);
if (vfe->power_count == 0) {
- ret = camss_pm_domain_on(vfe->camss, vfe->id);
- if (ret < 0)
- goto error_pm_domain;
-
ret = pm_runtime_get_sync(vfe->camss->dev);
if (ret < 0)
goto error_pm_runtime_get;
@@ -627,9 +623,7 @@ static int vfe_get(struct vfe_device *vfe)
error_pm_runtime_get:
pm_runtime_put_sync(vfe->camss->dev);
- camss_pm_domain_off(vfe->camss, vfe->id);
-error_pm_domain:
mutex_unlock(&vfe->power_lock);
return ret;
@@ -653,7 +647,6 @@ static void vfe_put(struct vfe_device *vfe)
}
camss_disable_clocks(vfe->nclocks, vfe->clock);
pm_runtime_put_sync(vfe->camss->dev);
- camss_pm_domain_off(vfe->camss, vfe->id);
}
vfe->power_count--;
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 7e7763f04b58..22f9d7d7085a 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -774,28 +774,6 @@ int camss_get_pixel_clock(struct media_entity *entity, u32 *pixel_clock)
return 0;
}
-int camss_pm_domain_on(struct camss *camss, int id)
-{
- if (camss->version == CAMSS_8x96 ||
- camss->version == CAMSS_660) {
- camss->genpd_link[id] = device_link_add(camss->dev,
- camss->genpd[id], DL_FLAG_STATELESS |
- DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE);
-
- if (!camss->genpd_link[id])
- return -EINVAL;
- }
-
- return 0;
-}
-
-void camss_pm_domain_off(struct camss *camss, int id)
-{
- if (camss->version == CAMSS_8x96 ||
- camss->version == CAMSS_660)
- device_link_del(camss->genpd_link[id]);
-}
-
/*
* camss_of_parse_endpoint_node - Parse port endpoint node
* @dev: Device
@@ -1214,6 +1192,48 @@ static const struct media_device_ops camss_media_ops = {
.link_notify = v4l2_pipeline_link_notify,
};
+
+static int camss_configure_pd(struct camss *camss)
+{
+ int nbr_pm_domains = 0;
+ int last_pm_domain = 0;
+ int i;
+ int ret;
+
+ if (camss->version == CAMSS_8x96 ||
+ camss->version == CAMSS_660)
+ nbr_pm_domains = PM_DOMAIN_CAMSS_COUNT;
+
+ for (i = 0; i < nbr_pm_domains; i++) {
+ camss->genpd[i] = dev_pm_domain_attach_by_id(camss->dev, i);
+ if (IS_ERR(camss->genpd[i])) {
+ ret = PTR_ERR(camss->genpd[i]);
+ goto fail_pm;
+ }
+
+ camss->genpd_link[i] = device_link_add(camss->dev, camss->genpd[i],
+ DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE);
+
+ if (!camss->genpd_link[i]) {
+ dev_pm_domain_detach(camss->genpd[i], true);
+ ret = -EINVAL;
+ goto fail_pm;
+ }
+
+ last_pm_domain = i;
+ }
+
+ return 0;
+
+fail_pm:
+ for (i = 0; i < last_pm_domain; i++) {
+ device_link_del(camss->genpd_link[i]);
+ dev_pm_domain_detach(camss->genpd[i], true);
+ }
+
+ return ret;
+}
+
/*
* camss_probe - Probe CAMSS platform device
* @pdev: Pointer to CAMSS platform device
@@ -1346,20 +1366,10 @@ static int camss_probe(struct platform_device *pdev)
}
}
- if (camss->version == CAMSS_8x96 ||
- camss->version == CAMSS_660) {
- camss->genpd[PM_DOMAIN_VFE0] = dev_pm_domain_attach_by_id(
- camss->dev, PM_DOMAIN_VFE0);
- if (IS_ERR(camss->genpd[PM_DOMAIN_VFE0]))
- return PTR_ERR(camss->genpd[PM_DOMAIN_VFE0]);
-
- camss->genpd[PM_DOMAIN_VFE1] = dev_pm_domain_attach_by_id(
- camss->dev, PM_DOMAIN_VFE1);
- if (IS_ERR(camss->genpd[PM_DOMAIN_VFE1])) {
- dev_pm_domain_detach(camss->genpd[PM_DOMAIN_VFE0],
- true);
- return PTR_ERR(camss->genpd[PM_DOMAIN_VFE1]);
- }
+ ret = camss_configure_pd(camss);
+ if (ret < 0) {
+ dev_err(dev, "Failed to configure power domains: %d\n", ret);
+ return ret;
}
pm_runtime_enable(dev);
@@ -1380,6 +1390,9 @@ static int camss_probe(struct platform_device *pdev)
void camss_delete(struct camss *camss)
{
+ int nbr_pm_domains = 0;
+ int i;
+
v4l2_device_unregister(&camss->v4l2_dev);
media_device_unregister(&camss->media_dev);
media_device_cleanup(&camss->media_dev);
@@ -1387,9 +1400,12 @@ void camss_delete(struct camss *camss)
pm_runtime_disable(camss->dev);
if (camss->version == CAMSS_8x96 ||
- camss->version == CAMSS_660) {
- dev_pm_domain_detach(camss->genpd[PM_DOMAIN_VFE0], true);
- dev_pm_domain_detach(camss->genpd[PM_DOMAIN_VFE1], true);
+ camss->version == CAMSS_660)
+ nbr_pm_domains = PM_DOMAIN_CAMSS_COUNT;
+
+ for (i = 0; i < nbr_pm_domains; i++) {
+ device_link_del(camss->genpd_link[i]);
+ dev_pm_domain_detach(camss->genpd[i], true);
}
kfree(camss);
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index b7ad8e9f68a8..7560d85b3352 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -57,9 +57,9 @@ struct resources_ispif {
};
enum pm_domain {
- PM_DOMAIN_VFE0,
- PM_DOMAIN_VFE1,
- PM_DOMAIN_COUNT
+ PM_DOMAIN_VFE0 = 0,
+ PM_DOMAIN_VFE1 = 1,
+ PM_DOMAIN_CAMSS_COUNT = 2, /* CAMSS series of ISPs */
};
enum camss_version {
@@ -83,8 +83,8 @@ struct camss {
int vfe_num;
struct vfe_device *vfe;
atomic_t ref_count;
- struct device *genpd[PM_DOMAIN_COUNT];
- struct device_link *genpd_link[PM_DOMAIN_COUNT];
+ struct device *genpd[PM_DOMAIN_CAMSS_COUNT];
+ struct device_link *genpd_link[PM_DOMAIN_CAMSS_COUNT];
};
struct camss_camera_interface {
@@ -110,8 +110,6 @@ int camss_enable_clocks(int nclocks, struct camss_clock *clock,
void camss_disable_clocks(int nclocks, struct camss_clock *clock);
struct media_entity *camss_find_sensor(struct media_entity *entity);
int camss_get_pixel_clock(struct media_entity *entity, u32 *pixel_clock);
-int camss_pm_domain_on(struct camss *camss, int id);
-void camss_pm_domain_off(struct camss *camss, int id);
void camss_delete(struct camss *camss);
#endif /* QC_MSM_CAMSS_H */
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 12/22] media: camss: Enable SDM845
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (9 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 11/22] media: camss: Remove per VFE power domain toggling Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 13/22] dt-bindings: media: camss: Add qcom,msm8916-camss binding Robert Foss
` (9 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Enable support for SDM845 based Titan 170 ISPs.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
drivers/media/platform/qcom/camss/camss.c | 17 +++++++++++++++++
drivers/media/platform/qcom/camss/camss.h | 6 ++++--
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 22f9d7d7085a..5ce7cae2ab9b 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -897,6 +897,12 @@ static int camss_init_subdevices(struct camss *camss)
csid_res = csid_res_660;
ispif_res = &ispif_res_660;
vfe_res = vfe_res_660;
+ } else if (camss->version == CAMSS_845) {
+ csiphy_res = csiphy_res_845;
+ csid_res = csid_res_845;
+ /* Titan VFEs don't have an ISPIF */
+ ispif_res = NULL;
+ vfe_res = vfe_res_845;
} else {
return -EINVAL;
}
@@ -1203,6 +1209,8 @@ static int camss_configure_pd(struct camss *camss)
if (camss->version == CAMSS_8x96 ||
camss->version == CAMSS_660)
nbr_pm_domains = PM_DOMAIN_CAMSS_COUNT;
+ else if (camss->version == CAMSS_845)
+ nbr_pm_domains = PM_DOMAIN_TITAN_COUNT;
for (i = 0; i < nbr_pm_domains; i++) {
camss->genpd[i] = dev_pm_domain_attach_by_id(camss->dev, i);
@@ -1271,6 +1279,12 @@ static int camss_probe(struct platform_device *pdev)
camss->csiphy_num = 3;
camss->csid_num = 4;
camss->vfe_num = 2;
+ } else if (of_device_is_compatible(dev->of_node,
+ "qcom,sdm845-camss")) {
+ camss->version = CAMSS_845;
+ camss->csiphy_num = 4;
+ camss->csid_num = 3;
+ camss->vfe_num = 3;
} else {
ret = -EINVAL;
goto err_free;
@@ -1402,6 +1416,8 @@ void camss_delete(struct camss *camss)
if (camss->version == CAMSS_8x96 ||
camss->version == CAMSS_660)
nbr_pm_domains = PM_DOMAIN_CAMSS_COUNT;
+ else if (camss->version == CAMSS_845)
+ nbr_pm_domains = PM_DOMAIN_TITAN_COUNT;
for (i = 0; i < nbr_pm_domains; i++) {
device_link_del(camss->genpd_link[i]);
@@ -1435,6 +1451,7 @@ static const struct of_device_id camss_dt_match[] = {
{ .compatible = "qcom,msm8916-camss" },
{ .compatible = "qcom,msm8996-camss" },
{ .compatible = "qcom,sdm660-camss" },
+ { .compatible = "qcom,sdm845-camss" },
{ }
};
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index 7560d85b3352..2f853557ed16 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -60,6 +60,8 @@ enum pm_domain {
PM_DOMAIN_VFE0 = 0,
PM_DOMAIN_VFE1 = 1,
PM_DOMAIN_CAMSS_COUNT = 2, /* CAMSS series of ISPs */
+ PM_DOMAIN_VFELITE = 2, /* VFELITE / TOP GDSC */
+ PM_DOMAIN_TITAN_COUNT = 3, /* Titan series of ISPs */
};
enum camss_version {
@@ -83,8 +85,8 @@ struct camss {
int vfe_num;
struct vfe_device *vfe;
atomic_t ref_count;
- struct device *genpd[PM_DOMAIN_CAMSS_COUNT];
- struct device_link *genpd_link[PM_DOMAIN_CAMSS_COUNT];
+ struct device *genpd[PM_DOMAIN_TITAN_COUNT];
+ struct device_link *genpd_link[PM_DOMAIN_TITAN_COUNT];
};
struct camss_camera_interface {
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 13/22] dt-bindings: media: camss: Add qcom,msm8916-camss binding
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (10 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 12/22] media: camss: Enable SDM845 Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 14/22] dt-bindings: media: camss: Add qcom,msm8996-camss binding Robert Foss
` (8 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Add bindings for qcom,msm8916-camss in order to support the camera
subsystem on MSM8916.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
Changes since v1:
- Laurent: Reworked driver to use dtschema
.../bindings/media/qcom,msm8916-camss.yaml | 270 ++++++++++++++++++
1 file changed, 270 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
new file mode 100644
index 000000000000..f0b0c67d0f0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,msm8916-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+ - Todor Tomov <todor.too@gmail.com>
+
+description: |
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+ compatible:
+ const: qcom,msm8916-camss
+
+ clocks:
+ description:
+ Input clocks for the hardware block.
+ minItems: 19
+ maxItems: 19
+
+ clock-names:
+ description:
+ Names of input clocks for the hardware block.
+ items:
+ - const: top_ahb
+ - const: ispif_ahb
+ - const: csiphy0_timer
+ - const: csiphy1_timer
+ - const: csi0_ahb
+ - const: csi0
+ - const: csi0_phy
+ - const: csi0_pix
+ - const: csi0_rdi
+ - const: csi1_ahb
+ - const: csi1
+ - const: csi1_phy
+ - const: csi1_pix
+ - const: csi1_rdi
+ - const: ahb
+ - const: vfe0
+ - const: csi_vfe0
+ - const: vfe_ahb
+ - const: vfe_axi
+
+ interrupts:
+ description:
+ IRQs for the hardware block.
+ minItems: 6
+ maxItems: 6
+
+ interrupt-names:
+ description:
+ Names of IRQs for the hardware block.
+ items:
+ - const: csiphy0
+ - const: csiphy1
+ - const: csid0
+ - const: csid1
+ - const: ispif
+ - const: vfe0
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ ports:
+ description:
+ The CSI data input ports.
+
+ type: object
+
+ properties:
+ port@0:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index. The value
+ must always be <1> as the physical
+ clock lane is lane 1.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index. Lane swapping
+ is supported. Physical lane indexes:
+ 0, 2, 3, 4.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port@1:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index. The value
+ must always be <1> as the physical
+ clock lane is lane 1.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index. Lane swapping
+ is supported. Physical lane indexes:
+ 0, 2, 3, 4.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ reg:
+ minItems: 9
+ maxItems: 9
+
+ reg-names:
+ items:
+ - const: csiphy0
+ - const: csiphy0_clk_mux
+ - const: csiphy1
+ - const: csiphy1_clk_mux
+ - const: csid0
+ - const: csid1
+ - const: ispif
+ - const: csi_clk_mux
+ - const: vfe0
+
+ vdda-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interrupt-names
+ - interrupts
+ - iommus
+ - power-domains
+ - reg
+ - reg-names
+ - vdda-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+ camss: camss@1b00000 {
+ compatible = "qcom,msm8916-camss";
+
+ clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+ <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+ <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI0_CLK>,
+ <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+ <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+ <&gcc GCC_CAMSS_CSI1_CLK>,
+ <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+ <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+ <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+ <&gcc GCC_CAMSS_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE0_CLK>,
+ <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+ <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+ <&gcc GCC_CAMSS_VFE_AXI_CLK>;
+
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe_ahb",
+ "vfe_axi";
+
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csid0",
+ "csid1",
+ "ispif",
+ "vfe0";
+
+ iommus = <&apps_iommu 3>;
+
+ power-domains = <&gcc VFE_GDSC>;
+
+ reg = <0x01b0ac00 0x200>,
+ <0x01b00030 0x4>,
+ <0x01b0b000 0x200>,
+ <0x01b00038 0x4>,
+ <0x01b08000 0x100>,
+ <0x01b08400 0x100>,
+ <0x01b0a000 0x500>,
+ <0x01b00020 0x10>,
+ <0x01b10000 0x1000>;
+
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csid0",
+ "csid1",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0";
+
+ vdda-supply = <®_2v8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ };
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 14/22] dt-bindings: media: camss: Add qcom,msm8996-camss binding
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (11 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 13/22] dt-bindings: media: camss: Add qcom,msm8916-camss binding Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-21 16:01 ` [PATCH v2 14/22] dt-bindings: media: camss: Add qcom, msm8996-camss binding Rob Herring
2021-01-22 16:33 ` [PATCH v2 14/22] dt-bindings: media: camss: Add qcom,msm8996-camss binding Rob Herring
2021-01-20 13:43 ` [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding Robert Foss
` (7 subsequent siblings)
20 siblings, 2 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Add bindings for qcom,msm8996-camss in order to support the camera
subsystem on MSM8996.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
Changes since v1:
- Laurent: Reworked driver to use dtschema
.../bindings/media/qcom,msm8996-camss.yaml | 418 ++++++++++++++++++
1 file changed, 418 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
new file mode 100644
index 000000000000..5ca0be8892ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
@@ -0,0 +1,418 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+ - Todor Tomov <todor.too@gmail.com>
+
+description: |
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+ compatible:
+ const: qcom,msm8996-camss
+
+ clocks:
+ description:
+ Input clocks for the hardware block.
+ minItems: 36
+ maxItems: 36
+
+ clock-names:
+ description:
+ Names of input clocks for the hardware block.
+ items:
+ - const: top_ahb
+ - const: ispif_ahb
+ - const: csiphy0_timer
+ - const: csiphy1_timer
+ - const: csiphy2_timer
+ - const: csi0_ahb
+ - const: csi0
+ - const: csi0_phy
+ - const: csi0_pix
+ - const: csi0_rdi
+ - const: csi1_ahb
+ - const: csi1
+ - const: csi1_phy
+ - const: csi1_pix
+ - const: csi1_rdi
+ - const: csi2_ahb
+ - const: csi2
+ - const: csi2_phy
+ - const: csi2_pix
+ - const: csi2_rdi
+ - const: csi3_ahb
+ - const: csi3
+ - const: csi3_phy
+ - const: csi3_pix
+ - const: csi3_rdi
+ - const: ahb
+ - const: vfe0
+ - const: csi_vfe0
+ - const: vfe0_ahb
+ - const: vfe0_stream
+ - const: vfe1
+ - const: csi_vfe1
+ - const: vfe1_ahb
+ - const: vfe1_stream
+ - const: vfe_ahb
+ - const: vfe_axi
+
+ interrupts:
+ description:
+ IRQs for the hardware block.
+ minItems: 10
+ maxItems: 10
+
+ interrupt-names:
+ description:
+ Names of IRQs for the hardware block.
+ items:
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csid3
+ - const: ispif
+ - const: vfe0
+ - const: vfe1
+
+ iommus:
+ maxItems: 4
+
+ power-domains:
+ maxItems: 2
+
+ ports:
+ description:
+ The CSI data input ports.
+
+ type: object
+
+ properties:
+ port@0:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index. The value must
+ always be <7> as the hardware supports D-PHY
+ and C-PHY, indexes are in a common set and
+ D-PHY physical clock lane is labeled as 7.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index. Lane swapping
+ is supported. Physical lane indexes are:
+ 0, 1, 2, 3
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port@1:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index. The value must
+ always be <7> as the hardware supports D-PHY
+ and C-PHY, indexes are in a common set and
+ D-PHY physical clock lane is labeled as 7.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index. Lane swapping
+ is supported. Physical lane indexes are:
+ 0, 1, 2, 3
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port@2:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index. The value must
+ always be <7> as the hardware supports D-PHY
+ and C-PHY, indexes are in a common set and
+ D-PHY physical clock lane is labeled as 7.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index. Lane swapping
+ is supported. Physical lane indexes are:
+ 0, 1, 2, 3
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port@3:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index. The value must
+ always be <7> as the hardware supports D-PHY
+ and C-PHY, indexes are in a common set and
+ D-PHY physical clock lane is labeled as 7.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index. Lane swapping
+ is supported. Physical lane indexes are:
+ 0, 1, 2, 3
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ reg:
+ minItems: 14
+ maxItems: 14
+
+ reg-names:
+ items:
+ - const: csiphy0
+ - const: csiphy0_clk_mux
+ - const: csiphy1
+ - const: csiphy1_clk_mux
+ - const: csiphy2
+ - const: csiphy2_clk_mux
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csid3
+ - const: ispif
+ - const: csi_clk_mux
+ - const: vfe0
+ - const: vfe1
+
+ vdda-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interrupt-names
+ - interrupts
+ - iommus
+ - power-domains
+ - reg
+ - reg-names
+ - vdda-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+ #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+
+ camss: camss@a00000 {
+ compatible = "qcom,msm8996-camss";
+
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_ISPIF_AHB_CLK>,
+ <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI0_AHB_CLK>,
+ <&mmcc CAMSS_CSI0_CLK>,
+ <&mmcc CAMSS_CSI0PHY_CLK>,
+ <&mmcc CAMSS_CSI0PIX_CLK>,
+ <&mmcc CAMSS_CSI0RDI_CLK>,
+ <&mmcc CAMSS_CSI1_AHB_CLK>,
+ <&mmcc CAMSS_CSI1_CLK>,
+ <&mmcc CAMSS_CSI1PHY_CLK>,
+ <&mmcc CAMSS_CSI1PIX_CLK>,
+ <&mmcc CAMSS_CSI1RDI_CLK>,
+ <&mmcc CAMSS_CSI2_AHB_CLK>,
+ <&mmcc CAMSS_CSI2_CLK>,
+ <&mmcc CAMSS_CSI2PHY_CLK>,
+ <&mmcc CAMSS_CSI2PIX_CLK>,
+ <&mmcc CAMSS_CSI2RDI_CLK>,
+ <&mmcc CAMSS_CSI3_AHB_CLK>,
+ <&mmcc CAMSS_CSI3_CLK>,
+ <&mmcc CAMSS_CSI3PHY_CLK>,
+ <&mmcc CAMSS_CSI3PIX_CLK>,
+ <&mmcc CAMSS_CSI3RDI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_CLK>,
+ <&mmcc CAMSS_CSI_VFE0_CLK>,
+ <&mmcc CAMSS_VFE0_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_STREAM_CLK>,
+ <&mmcc CAMSS_VFE1_CLK>,
+ <&mmcc CAMSS_CSI_VFE1_CLK>,
+ <&mmcc CAMSS_VFE1_AHB_CLK>,
+ <&mmcc CAMSS_VFE1_STREAM_CLK>,
+ <&mmcc CAMSS_VFE_AHB_CLK>,
+ <&mmcc CAMSS_VFE_AXI_CLK>;
+
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi3_ahb",
+ "csi3",
+ "csi3_phy",
+ "csi3_pix",
+ "csi3_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe0_ahb",
+ "vfe0_stream",
+ "vfe1",
+ "csi_vfe1",
+ "vfe1_ahb",
+ "vfe1_stream",
+ "vfe_ahb",
+ "vfe_axi";
+
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "vfe0",
+ "vfe1";
+
+ iommus = <&vfe_smmu 0>,
+ <&vfe_smmu 1>,
+ <&vfe_smmu 2>,
+ <&vfe_smmu 3>;
+
+ power-domains = <&mmcc VFE0_GDSC>,
+ <&mmcc VFE1_GDSC>;
+
+ reg = <0x00a34000 0x1000>,
+ <0x00a00030 0x4>,
+ <0x00a35000 0x1000>,
+ <0x00a00038 0x4>,
+ <0x00a36000 0x1000>,
+ <0x00a00040 0x4>,
+ <0x00a30000 0x100>,
+ <0x00a30400 0x100>,
+ <0x00a30800 0x100>,
+ <0x00a30c00 0x100>,
+ <0x00a31000 0x500>,
+ <0x00a00020 0x10>,
+ <0x00a10000 0x1000>,
+ <0x00a14000 0x1000>;
+
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csiphy2",
+ "csiphy2_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0",
+ "vfe1";
+
+ vdda-supply = <®_2v8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
\ No newline at end of file
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* Re: [PATCH v2 14/22] dt-bindings: media: camss: Add qcom, msm8996-camss binding
2021-01-20 13:43 ` [PATCH v2 14/22] dt-bindings: media: camss: Add qcom,msm8996-camss binding Robert Foss
@ 2021-01-21 16:01 ` Rob Herring
2021-01-22 16:33 ` [PATCH v2 14/22] dt-bindings: media: camss: Add qcom,msm8996-camss binding Rob Herring
1 sibling, 0 replies; 31+ messages in thread
From: Rob Herring @ 2021-01-21 16:01 UTC (permalink / raw)
To: Robert Foss
Cc: agross, linux-kernel, max.oss.09, todor.too, mchehab, michael,
Laurent Pinchart, Tomasz Figa, catalin.marinas, vkoul, shawnguo,
Sarvesh Sridutt, linux-arm-msm, linux-media, Andrey Konovalov,
will, devicetree, leoyang.li, AngeloGioacchino Del Regno,
Jonathan Marek, robh+dt, agx, Azam Sadiq Pasha Kapatrala Syed,
linux-arm-kernel, bjorn.andersson, geert+renesas, Anson.Huang
On Wed, 20 Jan 2021 14:43:49 +0100, Robert Foss wrote:
> Add bindings for qcom,msm8996-camss in order to support the camera
> subsystem on MSM8996.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>
> Changes since v1:
> - Laurent: Reworked driver to use dtschema
>
>
> .../bindings/media/qcom,msm8996-camss.yaml | 418 ++++++++++++++++++
> 1 file changed, 418 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
./Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml:418:7: [error] no new line character at the end of file (new-line-at-end-of-file)
dtschema/dtc warnings/errors:
See https://patchwork.ozlabs.org/patch/1429444
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v2 14/22] dt-bindings: media: camss: Add qcom,msm8996-camss binding
2021-01-20 13:43 ` [PATCH v2 14/22] dt-bindings: media: camss: Add qcom,msm8996-camss binding Robert Foss
2021-01-21 16:01 ` [PATCH v2 14/22] dt-bindings: media: camss: Add qcom, msm8996-camss binding Rob Herring
@ 2021-01-22 16:33 ` Rob Herring
1 sibling, 0 replies; 31+ messages in thread
From: Rob Herring @ 2021-01-22 16:33 UTC (permalink / raw)
To: Robert Foss
Cc: agross, bjorn.andersson, todor.too, mchehab, catalin.marinas,
will, shawnguo, leoyang.li, geert+renesas, vkoul, Anson.Huang,
michael, agx, max.oss.09, linux-arm-msm, linux-media, devicetree,
linux-kernel, linux-arm-kernel, AngeloGioacchino Del Regno,
Andrey Konovalov, Laurent Pinchart, Tomasz Figa,
Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt, Jonathan Marek
On Wed, Jan 20, 2021 at 02:43:49PM +0100, Robert Foss wrote:
> Add bindings for qcom,msm8996-camss in order to support the camera
> subsystem on MSM8996.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>
> Changes since v1:
> - Laurent: Reworked driver to use dtschema
>
>
> .../bindings/media/qcom,msm8996-camss.yaml | 418 ++++++++++++++++++
> 1 file changed, 418 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
> new file mode 100644
> index 000000000000..5ca0be8892ab
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
> @@ -0,0 +1,418 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm CAMSS ISP
> +
> +maintainers:
> + - Robert Foss <robert.foss@linaro.org>
> + - Todor Tomov <todor.too@gmail.com>
> +
> +description: |
> + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> + compatible:
> + const: qcom,msm8996-camss
> +
> + clocks:
> + description:
> + Input clocks for the hardware block.
That's every 'clocks' entry. Drop.
> + minItems: 36
> + maxItems: 36
> +
> + clock-names:
> + description:
> + Names of input clocks for the hardware block.
ditto.
> + items:
> + - const: top_ahb
> + - const: ispif_ahb
> + - const: csiphy0_timer
> + - const: csiphy1_timer
> + - const: csiphy2_timer
> + - const: csi0_ahb
> + - const: csi0
> + - const: csi0_phy
> + - const: csi0_pix
> + - const: csi0_rdi
> + - const: csi1_ahb
> + - const: csi1
> + - const: csi1_phy
> + - const: csi1_pix
> + - const: csi1_rdi
> + - const: csi2_ahb
> + - const: csi2
> + - const: csi2_phy
> + - const: csi2_pix
> + - const: csi2_rdi
> + - const: csi3_ahb
> + - const: csi3
> + - const: csi3_phy
> + - const: csi3_pix
> + - const: csi3_rdi
> + - const: ahb
> + - const: vfe0
> + - const: csi_vfe0
> + - const: vfe0_ahb
> + - const: vfe0_stream
> + - const: vfe1
> + - const: csi_vfe1
> + - const: vfe1_ahb
> + - const: vfe1_stream
> + - const: vfe_ahb
> + - const: vfe_axi
> +
> + interrupts:
> + description:
> + IRQs for the hardware block.
ditto
> + minItems: 10
> + maxItems: 10
> +
> + interrupt-names:
> + description:
> + Names of IRQs for the hardware block.
> + items:
> + - const: csiphy0
> + - const: csiphy1
> + - const: csiphy2
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csid3
> + - const: ispif
> + - const: vfe0
> + - const: vfe1
> +
> + iommus:
> + maxItems: 4
> +
> + power-domains:
> + maxItems: 2
Need to define what each one is.
items:
- description: ...
- description: ...
> +
> + ports:
This needs to reference graph.yaml#/properties/ports
See recent additions in -next.
> + description:
> + The CSI data input ports.
> +
> + type: object
> +
> + properties:
> + port@0:
There's a pending video-interfaces.yaml conversion which this is going
to need to use[1].
> + type: object
> + description: Input node for receiving CSI data.
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + clock-lanes:
> + description: |-
> + The physical clock lane index. The value must
> + always be <7> as the hardware supports D-PHY
> + and C-PHY, indexes are in a common set and
> + D-PHY physical clock lane is labeled as 7.
You don't need this in DT if it can only be 1 value.
> +
> + data-lanes:
> + description: |-
> + An array of physical data lanes indexes.
> + Position of an entry determines the logical
> + lane number, while the value of an entry
> + indicates physical lane index. Lane swapping
> + is supported. Physical lane indexes are:
> + 0, 1, 2, 3
No need to redescribe this here. Just any additional constraints.
'maxItems: 4' at least since the base allows 8.
Rob
[1] https://lore.kernel.org/linux-devicetree/20210104165808.2166686-1-robh@kernel.org/
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (12 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 14/22] dt-bindings: media: camss: Add qcom,msm8996-camss binding Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 16:17 ` AngeloGioacchino Del Regno
` (3 more replies)
2021-01-20 13:43 ` [PATCH v2 16/22] dt-bindings: media: camss: Add qcom,sdm845-camss binding Robert Foss
` (6 subsequent siblings)
20 siblings, 4 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Add bindings for qcom,sdm660-camss in order to support the camera
subsystem on SDM630/660 and SDA variants.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
Changes since v1:
- Laurent: Reworked driver to use dtschema
.../bindings/media/qcom,sdm660-camss.yaml | 416 ++++++++++++++++++
1 file changed, 416 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
new file mode 100644
index 000000000000..105ce84f9b71
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
@@ -0,0 +1,416 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+ - Todor Tomov <todor.too@gmail.com>
+
+description: |
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+ compatible:
+ const: qcom,sdm660-camss
+
+ clocks:
+ description:
+ Input clocks for the hardware block.
+ minItems: 42
+ maxItems: 42
+
+ clock-names:
+ description:
+ Names of input clocks for the hardware block.
+ items:
+ - const: ahb
+ - const: cphy_csid0
+ - const: cphy_csid1
+ - const: cphy_csid2
+ - const: cphy_csid3
+ - const: csi0_ahb
+ - const: csi0
+ - const: csi0_phy
+ - const: csi0_pix
+ - const: csi0_rdi
+ - const: csi1_ahb
+ - const: csi1
+ - const: csi1_phy
+ - const: csi1_pix
+ - const: csi1_rdi
+ - const: csi2_ahb
+ - const: csi2
+ - const: csi2_phy
+ - const: csi2_pix
+ - const: csi2_rdi
+ - const: csi3_ahb
+ - const: csi3
+ - const: csi3_phy
+ - const: csi3_pix
+ - const: csi3_rdi
+ - const: csiphy0_timer
+ - const: csiphy1_timer
+ - const: csiphy2_timer
+ - const: csiphy_ahb2crif
+ - const: csi_vfe0
+ - const: csi_vfe1
+ - const: ispif_ahb
+ - const: throttle_axi
+ - const: top_ahb
+ - const: vfe0_ahb
+ - const: vfe0
+ - const: vfe0_stream
+ - const: vfe1_ahb
+ - const: vfe1
+ - const: vfe1_stream
+ - const: vfe_ahb
+ - const: vfe_axi
+
+ interrupts:
+ description:
+ IRQs for the hardware block.
+ minItems: 10
+ maxItems: 10
+
+ interrupt-names:
+ description:
+ Names of IRQs for the hardware block.
+ items:
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csid3
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: ispif
+ - const: vfe0
+ - const: vfe1
+
+ iommus:
+ maxItems: 4
+
+ power-domains:
+ maxItems: 2
+
+ ports:
+ description:
+ The CSI data input ports.
+
+ type: object
+
+ properties:
+ port@0:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port@1:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port@2:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port@3:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ reg:
+ minItems: 14
+ maxItems: 14
+
+ reg-names:
+ items:
+ - const: csi_clk_mux
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csid3
+ - const: csiphy0
+ - const: csiphy0_clk_mux
+ - const: csiphy1
+ - const: csiphy1_clk_mux
+ - const: csiphy2
+ - const: csiphy2_clk_mux
+ - const: ispif
+ - const: vfe0
+ - const: vfe1
+
+ vdda-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interrupt-names
+ - interrupts
+ - iommus
+ - power-domains
+ - reg
+ - reg-names
+ - vdda-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm660.h>
+ #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+
+ camss: camss@ca00000 {
+ compatible = "qcom,sdm660-camss";
+
+ clocks = <&mmcc CAMSS_AHB_CLK>,
+ <&mmcc CAMSS_CPHY_CSID0_CLK>,
+ <&mmcc CAMSS_CPHY_CSID1_CLK>,
+ <&mmcc CAMSS_CPHY_CSID2_CLK>,
+ <&mmcc CAMSS_CPHY_CSID3_CLK>,
+ <&mmcc CAMSS_CSI0_AHB_CLK>,
+ <&mmcc CAMSS_CSI0_CLK>,
+ <&mmcc CAMSS_CPHY_CSID0_CLK>,
+ <&mmcc CAMSS_CSI0PIX_CLK>,
+ <&mmcc CAMSS_CSI0RDI_CLK>,
+ <&mmcc CAMSS_CSI1_AHB_CLK>,
+ <&mmcc CAMSS_CSI1_CLK>,
+ <&mmcc CAMSS_CPHY_CSID1_CLK>,
+ <&mmcc CAMSS_CSI1PIX_CLK>,
+ <&mmcc CAMSS_CSI1RDI_CLK>,
+ <&mmcc CAMSS_CSI2_AHB_CLK>,
+ <&mmcc CAMSS_CSI2_CLK>,
+ <&mmcc CAMSS_CPHY_CSID2_CLK>,
+ <&mmcc CAMSS_CSI2PIX_CLK>,
+ <&mmcc CAMSS_CSI2RDI_CLK>,
+ <&mmcc CAMSS_CSI3_AHB_CLK>,
+ <&mmcc CAMSS_CSI3_CLK>,
+ <&mmcc CAMSS_CPHY_CSID3_CLK>,
+ <&mmcc CAMSS_CSI3PIX_CLK>,
+ <&mmcc CAMSS_CSI3RDI_CLK>,
+ <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+ <&mmcc CSIPHY_AHB2CRIF_CLK>,
+ <&mmcc CAMSS_CSI_VFE0_CLK>,
+ <&mmcc CAMSS_CSI_VFE1_CLK>,
+ <&mmcc CAMSS_ISPIF_AHB_CLK>,
+ <&mmcc THROTTLE_CAMSS_AXI_CLK>,
+ <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_CLK>,
+ <&mmcc CAMSS_VFE0_STREAM_CLK>,
+ <&mmcc CAMSS_VFE1_AHB_CLK>,
+ <&mmcc CAMSS_VFE1_CLK>,
+ <&mmcc CAMSS_VFE1_STREAM_CLK>,
+ <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
+ <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
+
+ clock-names = "ahb",
+ "cphy_csid0",
+ "cphy_csid1",
+ "cphy_csid2",
+ "cphy_csid3",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi3_ahb",
+ "csi3",
+ "csi3_phy",
+ "csi3_pix",
+ "csi3_rdi",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "csiphy_ahb2crif",
+ "csi_vfe0",
+ "csi_vfe1",
+ "ispif_ahb",
+ "throttle_axi",
+ "top_ahb",
+ "vfe0_ahb",
+ "vfe0",
+ "vfe0_stream",
+ "vfe1_ahb",
+ "vfe1",
+ "vfe1_stream",
+ "vfe_ahb",
+ "vfe_axi";
+
+ interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "ispif",
+ "vfe0",
+ "vfe1";
+
+ iommus = <&mmss_smmu 0xc00>,
+ <&mmss_smmu 0xc01>,
+ <&mmss_smmu 0xc02>,
+ <&mmss_smmu 0xc03>;
+
+ power-domains = <&mmcc CAMSS_VFE0_GDSC>,
+ <&mmcc CAMSS_VFE1_GDSC>;
+
+ reg = <0x0ca00020 0x10>,
+ <0x0ca30000 0x100>,
+ <0x0ca30400 0x100>,
+ <0x0ca30800 0x100>,
+ <0x0ca30c00 0x100>,
+ <0x0c824000 0x1000>,
+ <0x0ca00120 0x4>,
+ <0x0c825000 0x1000>,
+ <0x0ca00124 0x4>,
+ <0x0c826000 0x1000>,
+ <0x0ca00128 0x4>,
+ <0x0ca31000 0x500>,
+ <0x0ca10000 0x1000>,
+ <0x0ca14000 0x1000>;
+
+ reg-names = "csi_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csiphy2",
+ "csiphy2_clk_mux",
+ "ispif",
+ "vfe0",
+ "vfe1";
+
+ vdda-supply = <®_2v8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* Re: [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding
2021-01-20 13:43 ` [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding Robert Foss
@ 2021-01-20 16:17 ` AngeloGioacchino Del Regno
2021-01-21 10:40 ` Robert Foss
2021-01-21 10:35 ` Robert Foss
` (2 subsequent siblings)
3 siblings, 1 reply; 31+ messages in thread
From: AngeloGioacchino Del Regno @ 2021-01-20 16:17 UTC (permalink / raw)
To: Robert Foss
Cc: Andy Gross, Bjorn Andersson, Todor Tomov, Mauro Carvalho Chehab,
Rob Herring, Catalin Marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09, MSM,
linux-media,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel, Linux ARM, Andrey Konovalov, Laurent Pinchart,
Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Il giorno mer 20 gen 2021 alle ore 14:44 Robert Foss
<robert.foss@linaro.org> ha scritto:
>
> Add bindings for qcom,sdm660-camss in order to support the camera
> subsystem on SDM630/660 and SDA variants.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
Hey Robert!
> ---
>
> Changes since v1:
> - Laurent: Reworked driver to use dtschema
>
>
> .../bindings/media/qcom,sdm660-camss.yaml | 416 ++++++++++++++++++
> 1 file changed, 416 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> new file mode 100644
> index 000000000000..105ce84f9b71
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> @@ -0,0 +1,416 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm CAMSS ISP
> +
> +maintainers:
If you want, feel free to add me to the maintainers list for SDM660 CAMSS
- AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> + - Robert Foss <robert.foss@linaro.org>
> + - Todor Tomov <todor.too@gmail.com>
> +
> +description: |
> + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> + compatible:
> + const: qcom,sdm660-camss
> +
> + clocks:
> + description:
> + Input clocks for the hardware block.
> + minItems: 42
> + maxItems: 42
> +
> + clock-names:
> + description:
> + Names of input clocks for the hardware block.
> + items:
> + - const: ahb
> + - const: cphy_csid0
> + - const: cphy_csid1
> + - const: cphy_csid2
> + - const: cphy_csid3
> + - const: csi0_ahb
> + - const: csi0
> + - const: csi0_phy
> + - const: csi0_pix
> + - const: csi0_rdi
> + - const: csi1_ahb
> + - const: csi1
> + - const: csi1_phy
> + - const: csi1_pix
> + - const: csi1_rdi
> + - const: csi2_ahb
> + - const: csi2
> + - const: csi2_phy
> + - const: csi2_pix
> + - const: csi2_rdi
> + - const: csi3_ahb
> + - const: csi3
> + - const: csi3_phy
> + - const: csi3_pix
> + - const: csi3_rdi
> + - const: csiphy0_timer
> + - const: csiphy1_timer
> + - const: csiphy2_timer
> + - const: csiphy_ahb2crif
> + - const: csi_vfe0
> + - const: csi_vfe1
> + - const: ispif_ahb
> + - const: throttle_axi
> + - const: top_ahb
> + - const: vfe0_ahb
> + - const: vfe0
> + - const: vfe0_stream
> + - const: vfe1_ahb
> + - const: vfe1
> + - const: vfe1_stream
> + - const: vfe_ahb
> + - const: vfe_axi
> +
> + interrupts:
> + description:
> + IRQs for the hardware block.
> + minItems: 10
> + maxItems: 10
> +
> + interrupt-names:
> + description:
> + Names of IRQs for the hardware block.
> + items:
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csid3
> + - const: csiphy0
> + - const: csiphy1
> + - const: csiphy2
> + - const: ispif
> + - const: vfe0
> + - const: vfe1
> +
> + iommus:
> + maxItems: 4
> +
> + power-domains:
> + maxItems: 2
> +
> + ports:
> + description:
> + The CSI data input ports.
> +
> + type: object
> +
> + properties:
> + port@0:
> + type: object
> + description: Input node for receiving CSI data.
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + clock-lanes:
> + description: |-
> + The physical clock lane index.
> +
> + data-lanes:
> + description: |-
> + An array of physical data lanes indexes.
> + Position of an entry determines the logical
> + lane number, while the value of an entry
> + indicates physical lane index.
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + required:
> + - endpoint
> + - reg
> +
> + port@1:
> + type: object
> + description: Input node for receiving CSI data.
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + clock-lanes:
> + description: |-
> + The physical clock lane index.
> +
> + data-lanes:
> + description: |-
> + An array of physical data lanes indexes.
> + Position of an entry determines the logical
> + lane number, while the value of an entry
> + indicates physical lane index.
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + required:
> + - endpoint
> + - reg
> +
> + port@2:
> + type: object
> + description: Input node for receiving CSI data.
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + clock-lanes:
> + description: |-
> + The physical clock lane index.
> +
> + data-lanes:
> + description: |-
> + An array of physical data lanes indexes.
> + Position of an entry determines the logical
> + lane number, while the value of an entry
> + indicates physical lane index.
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + required:
> + - endpoint
> + - reg
> +
> + port@3:
> + type: object
> + description: Input node for receiving CSI data.
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + clock-lanes:
> + description: |-
> + The physical clock lane index.
> +
> + data-lanes:
> + description: |-
> + An array of physical data lanes indexes.
> + Position of an entry determines the logical
> + lane number, while the value of an entry
> + indicates physical lane index.
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + required:
> + - endpoint
> + - reg
> +
> + reg:
> + minItems: 14
> + maxItems: 14
> +
> + reg-names:
> + items:
> + - const: csi_clk_mux
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csid3
> + - const: csiphy0
> + - const: csiphy0_clk_mux
> + - const: csiphy1
> + - const: csiphy1_clk_mux
> + - const: csiphy2
> + - const: csiphy2_clk_mux
> + - const: ispif
> + - const: vfe0
> + - const: vfe1
> +
> + vdda-supply:
> + description:
> + Definition of the regulator used as analog power supply.
> +
> +required:
> + - clock-names
> + - clocks
> + - compatible
> + - interrupt-names
> + - interrupts
> + - iommus
> + - power-domains
> + - reg
> + - reg-names
> + - vdda-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,gcc-sdm660.h>
> + #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
> +
> + camss: camss@ca00000 {
> + compatible = "qcom,sdm660-camss";
> +
> + clocks = <&mmcc CAMSS_AHB_CLK>,
> + <&mmcc CAMSS_CPHY_CSID0_CLK>,
> + <&mmcc CAMSS_CPHY_CSID1_CLK>,
> + <&mmcc CAMSS_CPHY_CSID2_CLK>,
> + <&mmcc CAMSS_CPHY_CSID3_CLK>,
> + <&mmcc CAMSS_CSI0_AHB_CLK>,
> + <&mmcc CAMSS_CSI0_CLK>,
> + <&mmcc CAMSS_CPHY_CSID0_CLK>,
> + <&mmcc CAMSS_CSI0PIX_CLK>,
> + <&mmcc CAMSS_CSI0RDI_CLK>,
> + <&mmcc CAMSS_CSI1_AHB_CLK>,
> + <&mmcc CAMSS_CSI1_CLK>,
> + <&mmcc CAMSS_CPHY_CSID1_CLK>,
> + <&mmcc CAMSS_CSI1PIX_CLK>,
> + <&mmcc CAMSS_CSI1RDI_CLK>,
> + <&mmcc CAMSS_CSI2_AHB_CLK>,
> + <&mmcc CAMSS_CSI2_CLK>,
> + <&mmcc CAMSS_CPHY_CSID2_CLK>,
> + <&mmcc CAMSS_CSI2PIX_CLK>,
> + <&mmcc CAMSS_CSI2RDI_CLK>,
> + <&mmcc CAMSS_CSI3_AHB_CLK>,
> + <&mmcc CAMSS_CSI3_CLK>,
> + <&mmcc CAMSS_CPHY_CSID3_CLK>,
> + <&mmcc CAMSS_CSI3PIX_CLK>,
> + <&mmcc CAMSS_CSI3RDI_CLK>,
> + <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
> + <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
> + <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
> + <&mmcc CSIPHY_AHB2CRIF_CLK>,
> + <&mmcc CAMSS_CSI_VFE0_CLK>,
> + <&mmcc CAMSS_CSI_VFE1_CLK>,
> + <&mmcc CAMSS_ISPIF_AHB_CLK>,
> + <&mmcc THROTTLE_CAMSS_AXI_CLK>,
> + <&mmcc CAMSS_TOP_AHB_CLK>,
> + <&mmcc CAMSS_VFE0_AHB_CLK>,
> + <&mmcc CAMSS_VFE0_CLK>,
> + <&mmcc CAMSS_VFE0_STREAM_CLK>,
> + <&mmcc CAMSS_VFE1_AHB_CLK>,
> + <&mmcc CAMSS_VFE1_CLK>,
> + <&mmcc CAMSS_VFE1_STREAM_CLK>,
> + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
> + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
> +
> + clock-names = "ahb",
> + "cphy_csid0",
> + "cphy_csid1",
> + "cphy_csid2",
> + "cphy_csid3",
> + "csi0_ahb",
> + "csi0",
> + "csi0_phy",
> + "csi0_pix",
> + "csi0_rdi",
> + "csi1_ahb",
> + "csi1",
> + "csi1_phy",
> + "csi1_pix",
> + "csi1_rdi",
> + "csi2_ahb",
> + "csi2",
> + "csi2_phy",
> + "csi2_pix",
> + "csi2_rdi",
> + "csi3_ahb",
> + "csi3",
> + "csi3_phy",
> + "csi3_pix",
> + "csi3_rdi",
> + "csiphy0_timer",
> + "csiphy1_timer",
> + "csiphy2_timer",
> + "csiphy_ahb2crif",
> + "csi_vfe0",
> + "csi_vfe1",
> + "ispif_ahb",
> + "throttle_axi",
> + "top_ahb",
> + "vfe0_ahb",
> + "vfe0",
> + "vfe0_stream",
> + "vfe1_ahb",
> + "vfe1",
> + "vfe1_stream",
> + "vfe_ahb",
> + "vfe_axi";
> +
> + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
> +
> + interrupt-names = "csid0",
> + "csid1",
> + "csid2",
> + "csid3",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "ispif",
> + "vfe0",
> + "vfe1";
> +
> + iommus = <&mmss_smmu 0xc00>,
> + <&mmss_smmu 0xc01>,
> + <&mmss_smmu 0xc02>,
> + <&mmss_smmu 0xc03>;
> +
> + power-domains = <&mmcc CAMSS_VFE0_GDSC>,
> + <&mmcc CAMSS_VFE1_GDSC>;
> +
> + reg = <0x0ca00020 0x10>,
> + <0x0ca30000 0x100>,
> + <0x0ca30400 0x100>,
> + <0x0ca30800 0x100>,
> + <0x0ca30c00 0x100>,
> + <0x0c824000 0x1000>,
> + <0x0ca00120 0x4>,
> + <0x0c825000 0x1000>,
> + <0x0ca00124 0x4>,
> + <0x0c826000 0x1000>,
> + <0x0ca00128 0x4>,
> + <0x0ca31000 0x500>,
> + <0x0ca10000 0x1000>,
> + <0x0ca14000 0x1000>;
> +
> + reg-names = "csi_clk_mux",
> + "csid0",
> + "csid1",
> + "csid2",
> + "csid3",
> + "csiphy0",
> + "csiphy0_clk_mux",
> + "csiphy1",
> + "csiphy1_clk_mux",
> + "csiphy2",
> + "csiphy2_clk_mux",
> + "ispif",
> + "vfe0",
> + "vfe1";
> +
> + vdda-supply = <®_2v8>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> --
> 2.27.0
>
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding
2021-01-20 16:17 ` AngeloGioacchino Del Regno
@ 2021-01-21 10:40 ` Robert Foss
0 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-21 10:40 UTC (permalink / raw)
To: AngeloGioacchino Del Regno
Cc: Andy Gross, Bjorn Andersson, Todor Tomov, Mauro Carvalho Chehab,
Rob Herring, Catalin Marinas, will, shawnguo, leoyang.li,
geert+renesas, Vinod Koul, Anson.Huang, michael, agx, max.oss.09,
MSM, linux-media,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel, Linux ARM, Andrey Konovalov, Laurent Pinchart,
Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Hey Angelo,
On Wed, 20 Jan 2021 at 17:17, AngeloGioacchino Del Regno
<kholk11@gmail.com> wrote:
>
> Il giorno mer 20 gen 2021 alle ore 14:44 Robert Foss
> <robert.foss@linaro.org> ha scritto:
> >
> > Add bindings for qcom,sdm660-camss in order to support the camera
> > subsystem on SDM630/660 and SDA variants.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
>
> Hey Robert!
>
> > ---
> >
> > Changes since v1:
> > - Laurent: Reworked driver to use dtschema
> >
> >
> > .../bindings/media/qcom,sdm660-camss.yaml | 416 ++++++++++++++++++
> > 1 file changed, 416 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> > new file mode 100644
> > index 000000000000..105ce84f9b71
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> > @@ -0,0 +1,416 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Qualcomm CAMSS ISP
> > +
> > +maintainers:
>
> If you want, feel free to add me to the maintainers list for SDM660 CAMSS
> - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Alright, I'll add you right away :)
>
> > + - Robert Foss <robert.foss@linaro.org>
> > + - Todor Tomov <todor.too@gmail.com>
> > +
> > +description: |
> > + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> > +
> > +properties:
> > + compatible:
> > + const: qcom,sdm660-camss
> > +
> > + clocks:
> > + description:
> > + Input clocks for the hardware block.
> > + minItems: 42
> > + maxItems: 42
> > +
> > + clock-names:
> > + description:
> > + Names of input clocks for the hardware block.
> > + items:
> > + - const: ahb
> > + - const: cphy_csid0
> > + - const: cphy_csid1
> > + - const: cphy_csid2
> > + - const: cphy_csid3
> > + - const: csi0_ahb
> > + - const: csi0
> > + - const: csi0_phy
> > + - const: csi0_pix
> > + - const: csi0_rdi
> > + - const: csi1_ahb
> > + - const: csi1
> > + - const: csi1_phy
> > + - const: csi1_pix
> > + - const: csi1_rdi
> > + - const: csi2_ahb
> > + - const: csi2
> > + - const: csi2_phy
> > + - const: csi2_pix
> > + - const: csi2_rdi
> > + - const: csi3_ahb
> > + - const: csi3
> > + - const: csi3_phy
> > + - const: csi3_pix
> > + - const: csi3_rdi
> > + - const: csiphy0_timer
> > + - const: csiphy1_timer
> > + - const: csiphy2_timer
> > + - const: csiphy_ahb2crif
> > + - const: csi_vfe0
> > + - const: csi_vfe1
> > + - const: ispif_ahb
> > + - const: throttle_axi
> > + - const: top_ahb
> > + - const: vfe0_ahb
> > + - const: vfe0
> > + - const: vfe0_stream
> > + - const: vfe1_ahb
> > + - const: vfe1
> > + - const: vfe1_stream
> > + - const: vfe_ahb
> > + - const: vfe_axi
> > +
> > + interrupts:
> > + description:
> > + IRQs for the hardware block.
> > + minItems: 10
> > + maxItems: 10
> > +
> > + interrupt-names:
> > + description:
> > + Names of IRQs for the hardware block.
> > + items:
> > + - const: csid0
> > + - const: csid1
> > + - const: csid2
> > + - const: csid3
> > + - const: csiphy0
> > + - const: csiphy1
> > + - const: csiphy2
> > + - const: ispif
> > + - const: vfe0
> > + - const: vfe1
> > +
> > + iommus:
> > + maxItems: 4
> > +
> > + power-domains:
> > + maxItems: 2
> > +
> > + ports:
> > + description:
> > + The CSI data input ports.
> > +
> > + type: object
> > +
> > + properties:
> > + port@0:
> > + type: object
> > + description: Input node for receiving CSI data.
> > + properties:
> > + endpoint:
> > + type: object
> > +
> > + properties:
> > + clock-lanes:
> > + description: |-
> > + The physical clock lane index.
> > +
> > + data-lanes:
> > + description: |-
> > + An array of physical data lanes indexes.
> > + Position of an entry determines the logical
> > + lane number, while the value of an entry
> > + indicates physical lane index.
> > +
> > + required:
> > + - clock-lanes
> > + - data-lanes
> > +
> > + required:
> > + - endpoint
> > + - reg
> > +
> > + port@1:
> > + type: object
> > + description: Input node for receiving CSI data.
> > + properties:
> > + endpoint:
> > + type: object
> > +
> > + properties:
> > + clock-lanes:
> > + description: |-
> > + The physical clock lane index.
> > +
> > + data-lanes:
> > + description: |-
> > + An array of physical data lanes indexes.
> > + Position of an entry determines the logical
> > + lane number, while the value of an entry
> > + indicates physical lane index.
> > +
> > + required:
> > + - clock-lanes
> > + - data-lanes
> > +
> > + required:
> > + - endpoint
> > + - reg
> > +
> > + port@2:
> > + type: object
> > + description: Input node for receiving CSI data.
> > + properties:
> > + endpoint:
> > + type: object
> > +
> > + properties:
> > + clock-lanes:
> > + description: |-
> > + The physical clock lane index.
> > +
> > + data-lanes:
> > + description: |-
> > + An array of physical data lanes indexes.
> > + Position of an entry determines the logical
> > + lane number, while the value of an entry
> > + indicates physical lane index.
> > +
> > + required:
> > + - clock-lanes
> > + - data-lanes
> > +
> > + required:
> > + - endpoint
> > + - reg
> > +
> > + port@3:
> > + type: object
> > + description: Input node for receiving CSI data.
> > + properties:
> > + endpoint:
> > + type: object
> > +
> > + properties:
> > + clock-lanes:
> > + description: |-
> > + The physical clock lane index.
> > +
> > + data-lanes:
> > + description: |-
> > + An array of physical data lanes indexes.
> > + Position of an entry determines the logical
> > + lane number, while the value of an entry
> > + indicates physical lane index.
> > +
> > + required:
> > + - clock-lanes
> > + - data-lanes
> > +
> > + required:
> > + - endpoint
> > + - reg
> > +
> > + reg:
> > + minItems: 14
> > + maxItems: 14
> > +
> > + reg-names:
> > + items:
> > + - const: csi_clk_mux
> > + - const: csid0
> > + - const: csid1
> > + - const: csid2
> > + - const: csid3
> > + - const: csiphy0
> > + - const: csiphy0_clk_mux
> > + - const: csiphy1
> > + - const: csiphy1_clk_mux
> > + - const: csiphy2
> > + - const: csiphy2_clk_mux
> > + - const: ispif
> > + - const: vfe0
> > + - const: vfe1
> > +
> > + vdda-supply:
> > + description:
> > + Definition of the regulator used as analog power supply.
> > +
> > +required:
> > + - clock-names
> > + - clocks
> > + - compatible
> > + - interrupt-names
> > + - interrupts
> > + - iommus
> > + - power-domains
> > + - reg
> > + - reg-names
> > + - vdda-supply
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/clock/qcom,gcc-sdm660.h>
> > + #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
> > +
> > + camss: camss@ca00000 {
> > + compatible = "qcom,sdm660-camss";
> > +
> > + clocks = <&mmcc CAMSS_AHB_CLK>,
> > + <&mmcc CAMSS_CPHY_CSID0_CLK>,
> > + <&mmcc CAMSS_CPHY_CSID1_CLK>,
> > + <&mmcc CAMSS_CPHY_CSID2_CLK>,
> > + <&mmcc CAMSS_CPHY_CSID3_CLK>,
> > + <&mmcc CAMSS_CSI0_AHB_CLK>,
> > + <&mmcc CAMSS_CSI0_CLK>,
> > + <&mmcc CAMSS_CPHY_CSID0_CLK>,
> > + <&mmcc CAMSS_CSI0PIX_CLK>,
> > + <&mmcc CAMSS_CSI0RDI_CLK>,
> > + <&mmcc CAMSS_CSI1_AHB_CLK>,
> > + <&mmcc CAMSS_CSI1_CLK>,
> > + <&mmcc CAMSS_CPHY_CSID1_CLK>,
> > + <&mmcc CAMSS_CSI1PIX_CLK>,
> > + <&mmcc CAMSS_CSI1RDI_CLK>,
> > + <&mmcc CAMSS_CSI2_AHB_CLK>,
> > + <&mmcc CAMSS_CSI2_CLK>,
> > + <&mmcc CAMSS_CPHY_CSID2_CLK>,
> > + <&mmcc CAMSS_CSI2PIX_CLK>,
> > + <&mmcc CAMSS_CSI2RDI_CLK>,
> > + <&mmcc CAMSS_CSI3_AHB_CLK>,
> > + <&mmcc CAMSS_CSI3_CLK>,
> > + <&mmcc CAMSS_CPHY_CSID3_CLK>,
> > + <&mmcc CAMSS_CSI3PIX_CLK>,
> > + <&mmcc CAMSS_CSI3RDI_CLK>,
> > + <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
> > + <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
> > + <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
> > + <&mmcc CSIPHY_AHB2CRIF_CLK>,
> > + <&mmcc CAMSS_CSI_VFE0_CLK>,
> > + <&mmcc CAMSS_CSI_VFE1_CLK>,
> > + <&mmcc CAMSS_ISPIF_AHB_CLK>,
> > + <&mmcc THROTTLE_CAMSS_AXI_CLK>,
> > + <&mmcc CAMSS_TOP_AHB_CLK>,
> > + <&mmcc CAMSS_VFE0_AHB_CLK>,
> > + <&mmcc CAMSS_VFE0_CLK>,
> > + <&mmcc CAMSS_VFE0_STREAM_CLK>,
> > + <&mmcc CAMSS_VFE1_AHB_CLK>,
> > + <&mmcc CAMSS_VFE1_CLK>,
> > + <&mmcc CAMSS_VFE1_STREAM_CLK>,
> > + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
> > + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
> > +
> > + clock-names = "ahb",
> > + "cphy_csid0",
> > + "cphy_csid1",
> > + "cphy_csid2",
> > + "cphy_csid3",
> > + "csi0_ahb",
> > + "csi0",
> > + "csi0_phy",
> > + "csi0_pix",
> > + "csi0_rdi",
> > + "csi1_ahb",
> > + "csi1",
> > + "csi1_phy",
> > + "csi1_pix",
> > + "csi1_rdi",
> > + "csi2_ahb",
> > + "csi2",
> > + "csi2_phy",
> > + "csi2_pix",
> > + "csi2_rdi",
> > + "csi3_ahb",
> > + "csi3",
> > + "csi3_phy",
> > + "csi3_pix",
> > + "csi3_rdi",
> > + "csiphy0_timer",
> > + "csiphy1_timer",
> > + "csiphy2_timer",
> > + "csiphy_ahb2crif",
> > + "csi_vfe0",
> > + "csi_vfe1",
> > + "ispif_ahb",
> > + "throttle_axi",
> > + "top_ahb",
> > + "vfe0_ahb",
> > + "vfe0",
> > + "vfe0_stream",
> > + "vfe1_ahb",
> > + "vfe1",
> > + "vfe1_stream",
> > + "vfe_ahb",
> > + "vfe_axi";
> > +
> > + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
> > + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
> > +
> > + interrupt-names = "csid0",
> > + "csid1",
> > + "csid2",
> > + "csid3",
> > + "csiphy0",
> > + "csiphy1",
> > + "csiphy2",
> > + "ispif",
> > + "vfe0",
> > + "vfe1";
> > +
> > + iommus = <&mmss_smmu 0xc00>,
> > + <&mmss_smmu 0xc01>,
> > + <&mmss_smmu 0xc02>,
> > + <&mmss_smmu 0xc03>;
> > +
> > + power-domains = <&mmcc CAMSS_VFE0_GDSC>,
> > + <&mmcc CAMSS_VFE1_GDSC>;
> > +
> > + reg = <0x0ca00020 0x10>,
> > + <0x0ca30000 0x100>,
> > + <0x0ca30400 0x100>,
> > + <0x0ca30800 0x100>,
> > + <0x0ca30c00 0x100>,
> > + <0x0c824000 0x1000>,
> > + <0x0ca00120 0x4>,
> > + <0x0c825000 0x1000>,
> > + <0x0ca00124 0x4>,
> > + <0x0c826000 0x1000>,
> > + <0x0ca00128 0x4>,
> > + <0x0ca31000 0x500>,
> > + <0x0ca10000 0x1000>,
> > + <0x0ca14000 0x1000>;
> > +
> > + reg-names = "csi_clk_mux",
> > + "csid0",
> > + "csid1",
> > + "csid2",
> > + "csid3",
> > + "csiphy0",
> > + "csiphy0_clk_mux",
> > + "csiphy1",
> > + "csiphy1_clk_mux",
> > + "csiphy2",
> > + "csiphy2_clk_mux",
> > + "ispif",
> > + "vfe0",
> > + "vfe1";
> > +
> > + vdda-supply = <®_2v8>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + };
> > + };
> > --
> > 2.27.0
> >
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding
2021-01-20 13:43 ` [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding Robert Foss
2021-01-20 16:17 ` AngeloGioacchino Del Regno
@ 2021-01-21 10:35 ` Robert Foss
2021-01-21 16:01 ` [PATCH v2 15/22] dt-bindings: media: camss: Add qcom, sdm660-camss binding Rob Herring
2021-01-22 16:34 ` [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding Rob Herring
3 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-21 10:35 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Robert Foss, Todor Tomov,
Mauro Carvalho Chehab, Rob Herring, catalin.marinas, will,
shawnguo, leoyang.li, geert+renesas, Vinod Koul, Anson.Huang,
michael, agx, max.oss.09, linux-arm-msm, linux-media,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
AngeloGioacchino Del Regno, Andrey Konovalov, Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Due to the dt-bindings supporting sdm660-camss, this patch depends
the sdm660 clock driver being upstreamed.
SDM630/660 Multimedia and GPU clock controllers
https://lkml.org/lkml/2020/9/26/166
On Wed, 20 Jan 2021 at 14:44, Robert Foss <robert.foss@linaro.org> wrote:
>
> Add bindings for qcom,sdm660-camss in order to support the camera
> subsystem on SDM630/660 and SDA variants.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>
> Changes since v1:
> - Laurent: Reworked driver to use dtschema
>
>
> .../bindings/media/qcom,sdm660-camss.yaml | 416 ++++++++++++++++++
> 1 file changed, 416 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> new file mode 100644
> index 000000000000..105ce84f9b71
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
> @@ -0,0 +1,416 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm CAMSS ISP
> +
> +maintainers:
> + - Robert Foss <robert.foss@linaro.org>
> + - Todor Tomov <todor.too@gmail.com>
> +
> +description: |
> + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> + compatible:
> + const: qcom,sdm660-camss
> +
> + clocks:
> + description:
> + Input clocks for the hardware block.
> + minItems: 42
> + maxItems: 42
> +
> + clock-names:
> + description:
> + Names of input clocks for the hardware block.
> + items:
> + - const: ahb
> + - const: cphy_csid0
> + - const: cphy_csid1
> + - const: cphy_csid2
> + - const: cphy_csid3
> + - const: csi0_ahb
> + - const: csi0
> + - const: csi0_phy
> + - const: csi0_pix
> + - const: csi0_rdi
> + - const: csi1_ahb
> + - const: csi1
> + - const: csi1_phy
> + - const: csi1_pix
> + - const: csi1_rdi
> + - const: csi2_ahb
> + - const: csi2
> + - const: csi2_phy
> + - const: csi2_pix
> + - const: csi2_rdi
> + - const: csi3_ahb
> + - const: csi3
> + - const: csi3_phy
> + - const: csi3_pix
> + - const: csi3_rdi
> + - const: csiphy0_timer
> + - const: csiphy1_timer
> + - const: csiphy2_timer
> + - const: csiphy_ahb2crif
> + - const: csi_vfe0
> + - const: csi_vfe1
> + - const: ispif_ahb
> + - const: throttle_axi
> + - const: top_ahb
> + - const: vfe0_ahb
> + - const: vfe0
> + - const: vfe0_stream
> + - const: vfe1_ahb
> + - const: vfe1
> + - const: vfe1_stream
> + - const: vfe_ahb
> + - const: vfe_axi
> +
> + interrupts:
> + description:
> + IRQs for the hardware block.
> + minItems: 10
> + maxItems: 10
> +
> + interrupt-names:
> + description:
> + Names of IRQs for the hardware block.
> + items:
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csid3
> + - const: csiphy0
> + - const: csiphy1
> + - const: csiphy2
> + - const: ispif
> + - const: vfe0
> + - const: vfe1
> +
> + iommus:
> + maxItems: 4
> +
> + power-domains:
> + maxItems: 2
> +
> + ports:
> + description:
> + The CSI data input ports.
> +
> + type: object
> +
> + properties:
> + port@0:
> + type: object
> + description: Input node for receiving CSI data.
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + clock-lanes:
> + description: |-
> + The physical clock lane index.
> +
> + data-lanes:
> + description: |-
> + An array of physical data lanes indexes.
> + Position of an entry determines the logical
> + lane number, while the value of an entry
> + indicates physical lane index.
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + required:
> + - endpoint
> + - reg
> +
> + port@1:
> + type: object
> + description: Input node for receiving CSI data.
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + clock-lanes:
> + description: |-
> + The physical clock lane index.
> +
> + data-lanes:
> + description: |-
> + An array of physical data lanes indexes.
> + Position of an entry determines the logical
> + lane number, while the value of an entry
> + indicates physical lane index.
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + required:
> + - endpoint
> + - reg
> +
> + port@2:
> + type: object
> + description: Input node for receiving CSI data.
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + clock-lanes:
> + description: |-
> + The physical clock lane index.
> +
> + data-lanes:
> + description: |-
> + An array of physical data lanes indexes.
> + Position of an entry determines the logical
> + lane number, while the value of an entry
> + indicates physical lane index.
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + required:
> + - endpoint
> + - reg
> +
> + port@3:
> + type: object
> + description: Input node for receiving CSI data.
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + clock-lanes:
> + description: |-
> + The physical clock lane index.
> +
> + data-lanes:
> + description: |-
> + An array of physical data lanes indexes.
> + Position of an entry determines the logical
> + lane number, while the value of an entry
> + indicates physical lane index.
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> + required:
> + - endpoint
> + - reg
> +
> + reg:
> + minItems: 14
> + maxItems: 14
> +
> + reg-names:
> + items:
> + - const: csi_clk_mux
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csid3
> + - const: csiphy0
> + - const: csiphy0_clk_mux
> + - const: csiphy1
> + - const: csiphy1_clk_mux
> + - const: csiphy2
> + - const: csiphy2_clk_mux
> + - const: ispif
> + - const: vfe0
> + - const: vfe1
> +
> + vdda-supply:
> + description:
> + Definition of the regulator used as analog power supply.
> +
> +required:
> + - clock-names
> + - clocks
> + - compatible
> + - interrupt-names
> + - interrupts
> + - iommus
> + - power-domains
> + - reg
> + - reg-names
> + - vdda-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,gcc-sdm660.h>
> + #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
> +
> + camss: camss@ca00000 {
> + compatible = "qcom,sdm660-camss";
> +
> + clocks = <&mmcc CAMSS_AHB_CLK>,
> + <&mmcc CAMSS_CPHY_CSID0_CLK>,
> + <&mmcc CAMSS_CPHY_CSID1_CLK>,
> + <&mmcc CAMSS_CPHY_CSID2_CLK>,
> + <&mmcc CAMSS_CPHY_CSID3_CLK>,
> + <&mmcc CAMSS_CSI0_AHB_CLK>,
> + <&mmcc CAMSS_CSI0_CLK>,
> + <&mmcc CAMSS_CPHY_CSID0_CLK>,
> + <&mmcc CAMSS_CSI0PIX_CLK>,
> + <&mmcc CAMSS_CSI0RDI_CLK>,
> + <&mmcc CAMSS_CSI1_AHB_CLK>,
> + <&mmcc CAMSS_CSI1_CLK>,
> + <&mmcc CAMSS_CPHY_CSID1_CLK>,
> + <&mmcc CAMSS_CSI1PIX_CLK>,
> + <&mmcc CAMSS_CSI1RDI_CLK>,
> + <&mmcc CAMSS_CSI2_AHB_CLK>,
> + <&mmcc CAMSS_CSI2_CLK>,
> + <&mmcc CAMSS_CPHY_CSID2_CLK>,
> + <&mmcc CAMSS_CSI2PIX_CLK>,
> + <&mmcc CAMSS_CSI2RDI_CLK>,
> + <&mmcc CAMSS_CSI3_AHB_CLK>,
> + <&mmcc CAMSS_CSI3_CLK>,
> + <&mmcc CAMSS_CPHY_CSID3_CLK>,
> + <&mmcc CAMSS_CSI3PIX_CLK>,
> + <&mmcc CAMSS_CSI3RDI_CLK>,
> + <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
> + <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
> + <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
> + <&mmcc CSIPHY_AHB2CRIF_CLK>,
> + <&mmcc CAMSS_CSI_VFE0_CLK>,
> + <&mmcc CAMSS_CSI_VFE1_CLK>,
> + <&mmcc CAMSS_ISPIF_AHB_CLK>,
> + <&mmcc THROTTLE_CAMSS_AXI_CLK>,
> + <&mmcc CAMSS_TOP_AHB_CLK>,
> + <&mmcc CAMSS_VFE0_AHB_CLK>,
> + <&mmcc CAMSS_VFE0_CLK>,
> + <&mmcc CAMSS_VFE0_STREAM_CLK>,
> + <&mmcc CAMSS_VFE1_AHB_CLK>,
> + <&mmcc CAMSS_VFE1_CLK>,
> + <&mmcc CAMSS_VFE1_STREAM_CLK>,
> + <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
> + <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
> +
> + clock-names = "ahb",
> + "cphy_csid0",
> + "cphy_csid1",
> + "cphy_csid2",
> + "cphy_csid3",
> + "csi0_ahb",
> + "csi0",
> + "csi0_phy",
> + "csi0_pix",
> + "csi0_rdi",
> + "csi1_ahb",
> + "csi1",
> + "csi1_phy",
> + "csi1_pix",
> + "csi1_rdi",
> + "csi2_ahb",
> + "csi2",
> + "csi2_phy",
> + "csi2_pix",
> + "csi2_rdi",
> + "csi3_ahb",
> + "csi3",
> + "csi3_phy",
> + "csi3_pix",
> + "csi3_rdi",
> + "csiphy0_timer",
> + "csiphy1_timer",
> + "csiphy2_timer",
> + "csiphy_ahb2crif",
> + "csi_vfe0",
> + "csi_vfe1",
> + "ispif_ahb",
> + "throttle_axi",
> + "top_ahb",
> + "vfe0_ahb",
> + "vfe0",
> + "vfe0_stream",
> + "vfe1_ahb",
> + "vfe1",
> + "vfe1_stream",
> + "vfe_ahb",
> + "vfe_axi";
> +
> + interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
> +
> + interrupt-names = "csid0",
> + "csid1",
> + "csid2",
> + "csid3",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "ispif",
> + "vfe0",
> + "vfe1";
> +
> + iommus = <&mmss_smmu 0xc00>,
> + <&mmss_smmu 0xc01>,
> + <&mmss_smmu 0xc02>,
> + <&mmss_smmu 0xc03>;
> +
> + power-domains = <&mmcc CAMSS_VFE0_GDSC>,
> + <&mmcc CAMSS_VFE1_GDSC>;
> +
> + reg = <0x0ca00020 0x10>,
> + <0x0ca30000 0x100>,
> + <0x0ca30400 0x100>,
> + <0x0ca30800 0x100>,
> + <0x0ca30c00 0x100>,
> + <0x0c824000 0x1000>,
> + <0x0ca00120 0x4>,
> + <0x0c825000 0x1000>,
> + <0x0ca00124 0x4>,
> + <0x0c826000 0x1000>,
> + <0x0ca00128 0x4>,
> + <0x0ca31000 0x500>,
> + <0x0ca10000 0x1000>,
> + <0x0ca14000 0x1000>;
> +
> + reg-names = "csi_clk_mux",
> + "csid0",
> + "csid1",
> + "csid2",
> + "csid3",
> + "csiphy0",
> + "csiphy0_clk_mux",
> + "csiphy1",
> + "csiphy1_clk_mux",
> + "csiphy2",
> + "csiphy2_clk_mux",
> + "ispif",
> + "vfe0",
> + "vfe1";
> +
> + vdda-supply = <®_2v8>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> --
> 2.27.0
>
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: [PATCH v2 15/22] dt-bindings: media: camss: Add qcom, sdm660-camss binding
2021-01-20 13:43 ` [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding Robert Foss
2021-01-20 16:17 ` AngeloGioacchino Del Regno
2021-01-21 10:35 ` Robert Foss
@ 2021-01-21 16:01 ` Rob Herring
2021-01-22 16:34 ` [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding Rob Herring
3 siblings, 0 replies; 31+ messages in thread
From: Rob Herring @ 2021-01-21 16:01 UTC (permalink / raw)
To: Robert Foss
Cc: robh+dt, linux-arm-msm, michael, shawnguo, Andrey Konovalov,
Laurent Pinchart, agross, leoyang.li, agx, Anson.Huang,
linux-arm-kernel, todor.too, Azam Sadiq Pasha Kapatrala Syed,
linux-kernel, vkoul, AngeloGioacchino Del Regno, will,
linux-media, devicetree, catalin.marinas, max.oss.09,
Jonathan Marek, mchehab, bjorn.andersson, Sarvesh Sridutt,
geert+renesas, Tomasz Figa
On Wed, 20 Jan 2021 14:43:50 +0100, Robert Foss wrote:
> Add bindings for qcom,sdm660-camss in order to support the camera
> subsystem on SDM630/660 and SDA variants.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>
> Changes since v1:
> - Laurent: Reworked driver to use dtschema
>
>
> .../bindings/media/qcom,sdm660-camss.yaml | 416 ++++++++++++++++++
> 1 file changed, 416 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/media/qcom,sdm660-camss.example.dts:21:18: fatal error: dt-bindings/clock/qcom,mmcc-sdm660.h: No such file or directory
21 | #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:344: Documentation/devicetree/bindings/media/qcom,sdm660-camss.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1370: dt_binding_check] Error 2
See https://patchwork.ozlabs.org/patch/1429447
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding
2021-01-20 13:43 ` [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding Robert Foss
` (2 preceding siblings ...)
2021-01-21 16:01 ` [PATCH v2 15/22] dt-bindings: media: camss: Add qcom, sdm660-camss binding Rob Herring
@ 2021-01-22 16:34 ` Rob Herring
2021-01-26 15:51 ` Robert Foss
3 siblings, 1 reply; 31+ messages in thread
From: Rob Herring @ 2021-01-22 16:34 UTC (permalink / raw)
To: Robert Foss
Cc: agross, bjorn.andersson, todor.too, mchehab, catalin.marinas,
will, shawnguo, leoyang.li, geert+renesas, vkoul, Anson.Huang,
michael, agx, max.oss.09, linux-arm-msm, linux-media, devicetree,
linux-kernel, linux-arm-kernel, AngeloGioacchino Del Regno,
Andrey Konovalov, Laurent Pinchart, Tomasz Figa,
Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt, Jonathan Marek
On Wed, Jan 20, 2021 at 02:43:50PM +0100, Robert Foss wrote:
> Add bindings for qcom,sdm660-camss in order to support the camera
> subsystem on SDM630/660 and SDA variants.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>
> Changes since v1:
> - Laurent: Reworked driver to use dtschema
Same comments on this one.
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding
2021-01-22 16:34 ` [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding Rob Herring
@ 2021-01-26 15:51 ` Robert Foss
0 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-26 15:51 UTC (permalink / raw)
To: Rob Herring
Cc: Andy Gross, Bjorn Andersson, Todor Tomov, Mauro Carvalho Chehab,
Catalin Marinas, will, shawnguo, leoyang.li, geert+renesas,
Vinod Koul, Anson.Huang, michael, agx, max.oss.09, MSM,
linux-media,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
AngeloGioacchino Del Regno, Andrey Konovalov, Laurent Pinchart,
Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Thanks Rob!
On Fri, 22 Jan 2021 at 17:34, Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Jan 20, 2021 at 02:43:50PM +0100, Robert Foss wrote:
> > Add bindings for qcom,sdm660-camss in order to support the camera
> > subsystem on SDM630/660 and SDA variants.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> >
> > Changes since v1:
> > - Laurent: Reworked driver to use dtschema
>
> Same comments on this one.
I applied the same feedback to msm8916, msm8996, sdm660 & sdm845
bindings in this series.
Thanks!
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PATCH v2 16/22] dt-bindings: media: camss: Add qcom,sdm845-camss binding
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (13 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 15/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-21 16:01 ` [PATCH v2 16/22] dt-bindings: media: camss: Add qcom, sdm845-camss binding Rob Herring
2021-01-20 13:43 ` [PATCH v2 17/22] MAINTAINERS: Change CAMSS documentation to use dtschema bindings Robert Foss
` (5 subsequent siblings)
20 siblings, 1 reply; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
Changes since v1:
- Laurent: Reworked driver to use dtschema
.../bindings/media/qcom,sdm845-camss.yaml | 394 ++++++++++++++++++
1 file changed, 394 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
new file mode 100644
index 000000000000..40864a5ab2c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
@@ -0,0 +1,394 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+ - Todor Tomov <todor.too@gmail.com>
+
+description: |
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+ compatible:
+ const: qcom,sdm845-camss
+
+ clocks:
+ description:
+ Input clocks for the hardware block.
+ minItems: 36
+ maxItems: 36
+
+ clock-names:
+ description:
+ Names of input clocks for the hardware block.
+ items:
+ - const: camnoc_axi
+ - const: cpas_ahb
+ - const: cphy_rx_src
+ - const: csi0
+ - const: csi0_src
+ - const: csi1
+ - const: csi1_src
+ - const: csi2
+ - const: csi2_src
+ - const: csiphy0
+ - const: csiphy0_timer
+ - const: csiphy0_timer_src
+ - const: csiphy1
+ - const: csiphy1_timer
+ - const: csiphy1_timer_src
+ - const: csiphy2
+ - const: csiphy2_timer
+ - const: csiphy2_timer_src
+ - const: csiphy3
+ - const: csiphy3_timer
+ - const: csiphy3_timer_src
+ - const: gcc_camera_ahb
+ - const: gcc_camera_axi
+ - const: slow_ahb_src
+ - const: soc_ahb
+ - const: vfe0_axi
+ - const: vfe0
+ - const: vfe0_cphy_rx
+ - const: vfe0_src
+ - const: vfe1_axi
+ - const: vfe1
+ - const: vfe1_cphy_rx
+ - const: vfe1_src
+ - const: vfe_lite
+ - const: vfe_lite_cphy_rx
+ - const: vfe_lite_src
+
+ interrupts:
+ description:
+ IRQs for the hardware block.
+ minItems: 10
+ maxItems: 10
+
+ interrupt-names:
+ description:
+ Names of IRQs for the hardware block.
+ items:
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csiphy3
+ - const: vfe0
+ - const: vfe1
+ - const: vfe_lite
+
+ iommus:
+ maxItems: 4
+
+ power-domains:
+ maxItems: 3
+
+ ports:
+ description:
+ The CSI data input ports.
+
+ type: object
+
+ properties:
+ port@0:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port@1:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port@2:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ port@3:
+ type: object
+ description: Input node for receiving CSI data.
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ clock-lanes:
+ description: |-
+ The physical clock lane index.
+
+ data-lanes:
+ description: |-
+ An array of physical data lanes indexes.
+ Position of an entry determines the logical
+ lane number, while the value of an entry
+ indicates physical lane index.
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ required:
+ - endpoint
+ - reg
+
+ reg:
+ minItems: 10
+ maxItems: 10
+
+ reg-names:
+ items:
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csiphy3
+ - const: vfe0
+ - const: vfe1
+ - const: vfe_lite
+
+ vdda-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interrupt-names
+ - interrupts
+ - iommus
+ - power-domains
+ - reg
+ - reg-names
+ - vdda-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ camss: camss@a00000 {
+ compatible = "qcom,sdm845-camss";
+
+ clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+ <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY0_CLK>,
+ <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY1_CLK>,
+ <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY2_CLK>,
+ <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY3_CLK>,
+ <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
+ <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMERA_AXI_CLK>,
+ <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_LITE_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
+
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cphy_rx_src",
+ "csi0",
+ "csi0_src",
+ "csi1",
+ "csi1_src",
+ "csi2",
+ "csi2_src",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy0_timer_src",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy1_timer_src",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy2_timer_src",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy3_timer_src",
+ "gcc_camera_ahb",
+ "gcc_camera_axi",
+ "slow_ahb_src",
+ "soc_ahb",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe0_src",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe1_src",
+ "vfe_lite",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_src";
+
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "vfe0",
+ "vfe1",
+ "vfe_lite";
+
+ iommus = <&apps_smmu 0x0808 0x0>,
+ <&apps_smmu 0x0810 0x8>,
+ <&apps_smmu 0x0c08 0x0>,
+ <&apps_smmu 0x0c10 0x8>;
+
+ power-domains = <&clock_camcc IFE_0_GDSC>,
+ <&clock_camcc IFE_1_GDSC>,
+ <&clock_camcc TITAN_TOP_GDSC>;
+
+ reg = <0 0xacb3000 0 0x1000>,
+ <0 0xacba000 0 0x1000>,
+ <0 0xacc8000 0 0x1000>,
+ <0 0xac65000 0 0x1000>,
+ <0 0xac66000 0 0x1000>,
+ <0 0xac67000 0 0x1000>,
+ <0 0xac68000 0 0x1000>,
+ <0 0xacaf000 0 0x4000>,
+ <0 0xacb6000 0 0x4000>,
+ <0 0xacc4000 0 0x4000>;
+
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "vfe0",
+ "vfe1",
+ "vfe_lite";
+
+ vdda-supply = <®_2v8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* Re: [PATCH v2 16/22] dt-bindings: media: camss: Add qcom, sdm845-camss binding
2021-01-20 13:43 ` [PATCH v2 16/22] dt-bindings: media: camss: Add qcom,sdm845-camss binding Robert Foss
@ 2021-01-21 16:01 ` Rob Herring
0 siblings, 0 replies; 31+ messages in thread
From: Rob Herring @ 2021-01-21 16:01 UTC (permalink / raw)
To: Robert Foss
Cc: shawnguo, mchehab, Sarvesh Sridutt, max.oss.09, geert+renesas,
agx, bjorn.andersson, Andrey Konovalov, linux-arm-kernel,
linux-arm-msm, Laurent Pinchart, robh+dt, michael, agross,
linux-media, Jonathan Marek, leoyang.li, vkoul, Tomasz Figa,
will, devicetree, Azam Sadiq Pasha Kapatrala Syed,
AngeloGioacchino Del Regno, catalin.marinas, linux-kernel,
Anson.Huang, todor.too
On Wed, 20 Jan 2021 14:43:51 +0100, Robert Foss wrote:
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>
> Changes since v1:
> - Laurent: Reworked driver to use dtschema
>
> .../bindings/media/qcom,sdm845-camss.yaml | 394 ++++++++++++++++++
> 1 file changed, 394 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
./Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml:394:1: [warning] too many blank lines (2 > 1) (empty-lines)
dtschema/dtc warnings/errors:
See https://patchwork.ozlabs.org/patch/1429446
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PATCH v2 17/22] MAINTAINERS: Change CAMSS documentation to use dtschema bindings
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (14 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 16/22] dt-bindings: media: camss: Add qcom,sdm845-camss binding Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 18/22] media: dt-bindings: media: Remove qcom,camss documentation Robert Foss
` (4 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Due to the complexity of describing multiple hardware generations
in one document, switch to using separate dt-bindings.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 47fad204d6aa..4008e321a584 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14684,7 +14684,7 @@ M: Todor Tomov <todor.too@gmail.com>
L: linux-media@vger.kernel.org
S: Maintained
F: Documentation/admin-guide/media/qcom_camss.rst
-F: Documentation/devicetree/bindings/media/qcom,camss.txt
+F: Documentation/devicetree/bindings/media/*camss*
F: drivers/media/platform/qcom/camss/
QUALCOMM CORE POWER REDUCTION (CPR) AVS DRIVER
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 18/22] media: dt-bindings: media: Remove qcom,camss documentation
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (15 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 17/22] MAINTAINERS: Change CAMSS documentation to use dtschema bindings Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 19/22] arm64: defconfig: Build Qcom CAMSS as module Robert Foss
` (3 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
This documentation has been incorporated in dtschema dt-bindings
for the devices supported by CAMSS and is no longer helpful.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
.../devicetree/bindings/media/qcom,camss.txt | 236 ------------------
1 file changed, 236 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/qcom,camss.txt
diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt
deleted file mode 100644
index 498234629e21..000000000000
--- a/Documentation/devicetree/bindings/media/qcom,camss.txt
+++ /dev/null
@@ -1,236 +0,0 @@
-Qualcomm Camera Subsystem
-
-* Properties
-
-- compatible:
- Usage: required
- Value type: <stringlist>
- Definition: Should contain one of:
- - "qcom,msm8916-camss"
- - "qcom,msm8996-camss"
- - "qcom,sdm660-camss"
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: Register ranges as listed in the reg-names property.
-- reg-names:
- Usage: required
- Value type: <stringlist>
- Definition: Should contain the following entries:
- - "csiphy0"
- - "csiphy0_clk_mux"
- - "csiphy1"
- - "csiphy1_clk_mux"
- - "csiphy2" (8996 only)
- - "csiphy2_clk_mux" (8996 only)
- - "csid0"
- - "csid1"
- - "csid2" (8996 only)
- - "csid3" (8996 only)
- - "ispif"
- - "csi_clk_mux"
- - "vfe0"
- - "vfe1" (8996 only)
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: Interrupts as listed in the interrupt-names property.
-- interrupt-names:
- Usage: required
- Value type: <stringlist>
- Definition: Should contain the following entries:
- - "csiphy0"
- - "csiphy1"
- - "csiphy2" (8996 only)
- - "csid0"
- - "csid1"
- - "csid2" (8996 only)
- - "csid3" (8996 only)
- - "ispif"
- - "vfe0"
- - "vfe1" (8996 only)
-- power-domains:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A phandle and power domain specifier pairs to the
- power domain which is responsible for collapsing
- and restoring power to the peripheral.
-- clocks:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A list of phandle and clock specifier pairs as listed
- in clock-names property.
-- clock-names:
- Usage: required
- Value type: <stringlist>
- Definition: Should contain the following entries:
- - "top_ahb"
- - "throttle_axi" (660 only)
- - "ispif_ahb"
- - "csiphy0_timer"
- - "csiphy1_timer"
- - "csiphy2_timer" (8996 only)
- - "csiphy_ahb2crif" (660 only)
- - "csi0_ahb"
- - "csi0"
- - "csi0_phy"
- - "csi0_pix"
- - "csi0_rdi"
- - "cphy_csid0" (660 only)
- - "csi1_ahb"
- - "csi1"
- - "csi1_phy"
- - "csi1_pix"
- - "csi1_rdi"
- - "cphy_csid1" (660 only)
- - "csi2_ahb" (8996 only)
- - "csi2" (8996 only)
- - "csi2_phy" (8996 only)
- - "csi2_pix" (8996 only)
- - "csi2_rdi" (8996 only)
- - "cphy_csid2" (660 only)
- - "csi3_ahb" (8996 only)
- - "csi3" (8996 only)
- - "csi3_phy" (8996 only)
- - "csi3_pix" (8996 only)
- - "csi3_rdi" (8996 only)
- - "cphy_csid3" (660 only)
- - "ahb"
- - "vfe0"
- - "csi_vfe0"
- - "vfe0_ahb", (8996 only)
- - "vfe0_stream", (8996 only)
- - "vfe1", (8996 only)
- - "csi_vfe1", (8996 only)
- - "vfe1_ahb", (8996 only)
- - "vfe1_stream", (8996 only)
- - "vfe_ahb"
- - "vfe_axi"
-- vdda-supply:
- Usage: required
- Value type: <phandle>
- Definition: A phandle to voltage supply for CSI2.
-- iommus:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A list of phandle and IOMMU specifier pairs.
-
-* Nodes
-
-- ports:
- Usage: required
- Definition: As described in video-interfaces.txt in same directory.
- Properties:
- - reg:
- Usage: required
- Value type: <u32>
- Definition: Selects CSI2 PHY interface - PHY0, PHY1
- or PHY2 (8996 only)
- Endpoint node properties:
- - clock-lanes:
- Usage: required
- Value type: <u32>
- Definition: The physical clock lane index. On 8916
- the value must always be <1> as the physical
- clock lane is lane 1. On 8996 the value must
- always be <7> as the hardware supports D-PHY
- and C-PHY, indexes are in a common set and
- D-PHY physical clock lane is labeled as 7.
- - data-lanes:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: An array of physical data lanes indexes.
- Position of an entry determines the logical
- lane number, while the value of an entry
- indicates physical lane index. Lane swapping
- is supported. Physical lane indexes for
- 8916: 0, 2, 3, 4; for 8996: 0, 1, 2, 3.
-
-* An Example
-
- camss: camss@1b00000 {
- compatible = "qcom,msm8916-camss";
- reg = <0x1b0ac00 0x200>,
- <0x1b00030 0x4>,
- <0x1b0b000 0x200>,
- <0x1b00038 0x4>,
- <0x1b08000 0x100>,
- <0x1b08400 0x100>,
- <0x1b0a000 0x500>,
- <0x1b00020 0x10>,
- <0x1b10000 0x1000>;
- reg-names = "csiphy0",
- "csiphy0_clk_mux",
- "csiphy1",
- "csiphy1_clk_mux",
- "csid0",
- "csid1",
- "ispif",
- "csi_clk_mux",
- "vfe0";
- interrupts = <GIC_SPI 78 0>,
- <GIC_SPI 79 0>,
- <GIC_SPI 51 0>,
- <GIC_SPI 52 0>,
- <GIC_SPI 55 0>,
- <GIC_SPI 57 0>;
- interrupt-names = "csiphy0",
- "csiphy1",
- "csid0",
- "csid1",
- "ispif",
- "vfe0";
- power-domains = <&gcc VFE_GDSC>;
- clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
- <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
- <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
- <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
- <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
- <&gcc GCC_CAMSS_CSI0_CLK>,
- <&gcc GCC_CAMSS_CSI0PHY_CLK>,
- <&gcc GCC_CAMSS_CSI0PIX_CLK>,
- <&gcc GCC_CAMSS_CSI0RDI_CLK>,
- <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
- <&gcc GCC_CAMSS_CSI1_CLK>,
- <&gcc GCC_CAMSS_CSI1PHY_CLK>,
- <&gcc GCC_CAMSS_CSI1PIX_CLK>,
- <&gcc GCC_CAMSS_CSI1RDI_CLK>,
- <&gcc GCC_CAMSS_AHB_CLK>,
- <&gcc GCC_CAMSS_VFE0_CLK>,
- <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
- <&gcc GCC_CAMSS_VFE_AHB_CLK>,
- <&gcc GCC_CAMSS_VFE_AXI_CLK>;
- clock-names = "top_ahb",
- "ispif_ahb",
- "csiphy0_timer",
- "csiphy1_timer",
- "csi0_ahb",
- "csi0",
- "csi0_phy",
- "csi0_pix",
- "csi0_rdi",
- "csi1_ahb",
- "csi1",
- "csi1_phy",
- "csi1_pix",
- "csi1_rdi",
- "ahb",
- "vfe0",
- "csi_vfe0",
- "vfe_ahb",
- "vfe_axi";
- vdda-supply = <&pm8916_l2>;
- iommus = <&apps_iommu 3>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- csiphy0_ep: endpoint {
- clock-lanes = <1>;
- data-lanes = <0 2>;
- remote-endpoint = <&ov5645_ep>;
- };
- };
- };
- };
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 19/22] arm64: defconfig: Build Qcom CAMSS as module
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (16 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 18/22] media: dt-bindings: media: Remove qcom,camss documentation Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 20/22] arm64: dts: sdm845: Add CAMSS ISP node Robert Foss
` (2 subsequent siblings)
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Build camera ISP driver as a module.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 838301650a79..cb224d2af6a0 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -640,6 +640,7 @@ CONFIG_VIDEO_RENESAS_FDP1=m
CONFIG_VIDEO_RENESAS_FCP=m
CONFIG_VIDEO_RENESAS_VSP1=m
CONFIG_SDR_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_QCOM_CAMSS=m
CONFIG_VIDEO_RCAR_DRIF=m
CONFIG_VIDEO_IMX219=m
CONFIG_VIDEO_OV5645=m
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 20/22] arm64: dts: sdm845: Add CAMSS ISP node
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (17 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 19/22] arm64: defconfig: Build Qcom CAMSS as module Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 21/22] arm64: dts: sdm845-db845c: Configure regulator for camss node Robert Foss
2021-01-20 13:43 ` [PATCH v2 22/22] arm64: dts: sdm845-db845c: Enable ov8856 sensor and connect to ISP Robert Foss
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Add the camss dt node for sdm845.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
Changes since v1
- Laurent: Fix subject
- Laurent: Remove redundant regulator labels
- Laurent: Remove empty line
arch/arm64/boot/dts/qcom/sdm845.dtsi | 130 +++++++++++++++++++++++++++
1 file changed, 130 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index bcf888381f14..1ead2c77d068 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3911,6 +3911,136 @@ videocc: clock-controller@ab00000 {
#reset-cells = <1>;
};
+ camss: camss@a00000 {
+ compatible = "qcom,sdm845-camss";
+ reg = <0 0xacb3000 0 0x1000>,
+ <0 0xacba000 0 0x1000>,
+ <0 0xacc8000 0 0x1000>,
+ <0 0xac65000 0 0x1000>,
+ <0 0xac66000 0 0x1000>,
+ <0 0xac67000 0 0x1000>,
+ <0 0xac68000 0 0x1000>,
+ <0 0xacaf000 0 0x4000>,
+ <0 0xacb6000 0 0x4000>,
+ <0 0xacc4000 0 0x4000>;
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "vfe0",
+ "vfe1",
+ "vfe_lite";
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "vfe0",
+ "vfe1",
+ "vfe_lite";
+ power-domains = <&clock_camcc IFE_0_GDSC>,
+ <&clock_camcc IFE_1_GDSC>,
+ <&clock_camcc TITAN_TOP_GDSC>;
+ clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+ <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY0_CLK>,
+ <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY1_CLK>,
+ <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY2_CLK>,
+ <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY3_CLK>,
+ <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
+ <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMERA_AXI_CLK>,
+ <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_LITE_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cphy_rx_src",
+ "csi0",
+ "csi0_src",
+ "csi1",
+ "csi1_src",
+ "csi2",
+ "csi2_src",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy0_timer_src",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy1_timer_src",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy2_timer_src",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy3_timer_src",
+ "gcc_camera_ahb",
+ "gcc_camera_axi",
+ "slow_ahb_src",
+ "soc_ahb",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe0_src",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe1_src",
+ "vfe_lite",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_src";
+
+ iommus = <&apps_smmu 0x0808 0x0>,
+ <&apps_smmu 0x0810 0x8>,
+ <&apps_smmu 0x0c08 0x0>,
+ <&apps_smmu 0x0c10 0x8>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
cci: cci@ac4a000 {
compatible = "qcom,sdm845-cci";
#address-cells = <1>;
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 21/22] arm64: dts: sdm845-db845c: Configure regulator for camss node
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (18 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 20/22] arm64: dts: sdm845: Add CAMSS ISP node Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
2021-01-20 13:43 ` [PATCH v2 22/22] arm64: dts: sdm845-db845c: Enable ov8856 sensor and connect to ISP Robert Foss
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Add regulator to camss device tree node.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a943b3f353ce..5842ab65789c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1106,6 +1106,10 @@ &cci {
status = "okay";
};
+&camss {
+ vdda-supply = <&vreg_l1a_0p875>;
+};
+
&cci_i2c0 {
camera@10 {
compatible = "ovti,ov8856";
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH v2 22/22] arm64: dts: sdm845-db845c: Enable ov8856 sensor and connect to ISP
2021-01-20 13:43 [PATCH v2 01/22] media: camss: Fix vfe_isr_comp_done() documentation Robert Foss
` (19 preceding siblings ...)
2021-01-20 13:43 ` [PATCH v2 21/22] arm64: dts: sdm845-db845c: Configure regulator for camss node Robert Foss
@ 2021-01-20 13:43 ` Robert Foss
20 siblings, 0 replies; 31+ messages in thread
From: Robert Foss @ 2021-01-20 13:43 UTC (permalink / raw)
To: agross, bjorn.andersson, robert.foss, todor.too, mchehab,
robh+dt, catalin.marinas, will, shawnguo, leoyang.li,
geert+renesas, vkoul, Anson.Huang, michael, agx, max.oss.09,
linux-arm-msm, linux-media, devicetree, linux-kernel,
linux-arm-kernel, AngeloGioacchino Del Regno, Andrey Konovalov,
Laurent Pinchart
Cc: Tomasz Figa, Azam Sadiq Pasha Kapatrala Syed, Sarvesh Sridutt,
Jonathan Marek
Enable camss & ov8856 DT nodes.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 5842ab65789c..d89286f6aacb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1108,6 +1108,21 @@ &cci {
&camss {
vdda-supply = <&vreg_l1a_0p875>;
+
+ status = "ok";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ csiphy0_ep: endpoint {
+ clock-lanes = <1>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&ov8856_ep>;
+ };
+ };
+ };
};
&cci_i2c0 {
@@ -1139,7 +1154,7 @@ camera@10 {
avdd-supply = <&cam0_avdd_2v8>;
dvdd-supply = <&cam0_dvdd_1v2>;
- status = "disable";
+ status = "ok";
port {
ov8856_ep: endpoint {
@@ -1147,7 +1162,7 @@ ov8856_ep: endpoint {
link-frequencies = /bits/ 64
<360000000 180000000>;
data-lanes = <1 2 3 4>;
-// remote-endpoint = <&csiphy0_ep>;
+ remote-endpoint = <&csiphy0_ep>;
};
};
};
--
2.27.0
^ permalink raw reply related [flat|nested] 31+ messages in thread