From: Jonathan Cameron <jic23@kernel.org>
To: Rob Herring <robh@kernel.org>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Subject: Re: [PATCH 39/46] dt-bindings:iio:dac:ad5755: txt to yaml format conversion.
Date: Sun, 21 Feb 2021 16:33:45 +0000 [thread overview]
Message-ID: <20210221163345.6a174531@archlinux> (raw)
In-Reply-To: <20201122184052.141efda6@archlinux>
Hi Rob,
I still have an open question below on this one.
If you have a chance to take a look that would be great.
Jonathan
> > > diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
> > > new file mode 100644
> > > index 000000000000..74edff3e8408
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
> > > @@ -0,0 +1,178 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/iio/dac/adi,ad5755.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Analog Devices AD5755 Multi-Channel DAC
> > > +
> > > +maintainers:
> > > + - Sean Nyekjaer <sean.nyekjaer@prevas.dk>
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - adi,ad5755
> > > + - adi,ad5755-1
> > > + - adi,ad5757
> > > + - adi,ad5735
> > > + - adi,ad5737
> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + spi-cpha:
> > > + description: Either this or spi-cpol but not both.
> > > + spi-cpol: true
> > > +
> > > + spi-max-frequency: true
> > > +
> > > + adi,ext-dc-dc-compenstation-resistor:
> > > + $ref: /schemas/types.yaml#/definitions/flag
> > > + description:
> > > + Set if the hardware have an external resistor and thereby bypasses
> > > + the internal compensation resistor.
> > > +
> > > + adi,dc-dc-phase:
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + enum: [0, 1, 2, 3]
> > > + description: |
> > > + Valid values for DC DC Phase control is:
> > > + 0: All dc-to-dc converters clock on the same edge.
> > > + 1: Channel A and Channel B clock on the same edge,
> > > + Channel C and Channel D clock on opposite edges.
> > > + 2: Channel A and Channel C clock on the same edge,
> > > + Channel B and Channel D clock on opposite edges.
> > > + 3: Channel A, Channel B, Channel C, and Channel D
> > > + clock 90 degrees out of phase from each other.
> > > +
> > > + adi,dc-dc-freq-hz:
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + enum: [250000, 410000, 650000]
> > > +
> > > + adi,dc-dc-max-microvolt:
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + description:
> > > + Maximum allowed Vboost voltage supplied by the dc-to-dc converter.
> > > + enum: [23000000, 24500000, 27000000, 29500000]
> > > +
> > > + "#address-cells":
> > > + const: 1
> > > +
> > > + "#size-cells":
> > > + const: 0
> > > +
> > > + "#io-channel-cells":
> > > + const: 1
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > +
> > > +additionalProperties: false
> > > +
> > > +patternProperties:
> > > + "^(channel@)[0-7]$":
> > > + type: object
> > > + description: Child node to describe a channel
> > > + properties:
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + adi,mode:
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> > > + minimum: 0
> > > + maximum: 6
> > > + description: |
> > > + Valid values for DAC modes is:
> > > + 0: 0 V to 5 V voltage range.
> > > + 1: 0 V to 10 V voltage range.
> > > + 2: Plus minus 5 V voltage range.
> > > + 3: Plus minus 10 V voltage range.
> > > + 4: 4 mA to 20 mA current range.
> > > + 5: 0 mA to 20 mA current range.
> > > + 6: 0 mA to 24 mA current range.
> > > +
> > > + adi,ext-current-sense-resistor:
> > > + $ref: /schemas/types.yaml#/definitions/flag
> > > + description:
> > > + Set if the hardware has an external current sense resistor
> > > +
> > > + adi,enable-voltage-overrange:
> > > + $ref: /schemas/types.yaml#/definitions/flag
> > > + description: Enable voltage overrange
> > > +
> > > + adi,slew:
> > > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > > + description: |
> > > + Array of slewrate settings should contain 3 fields:
> > > + 1: Should be either 0 or 1 in order to enable or disable slewrate.
> > > + 2: Slew rate update frequency
> > > + 3: Slew step size
> > > + items:
> > > + - enum: [0, 1]
> > > + - enum: [64000, 32000, 16000, 8000, 4000, 2000, 1000, 500, 250, 125, 64, 32, 16, 8, 4, 0]
> > > + - enum: [1, 2, 4, 16, 32, 64, 128, 256]
> > > +
> > > + required:
> > > + - reg
> > > +
> > > + additionalProperties: false
> > > +
> > > +allOf:
> > > + - $ref: '#/definitions/cpolXORcpha'
> > > +
> > > +definitions:
> > > + cpolXORcpha:
> >
> > Like the other one, you can drop 'definitions'.
>
> As replied to the other one I can't figure out a syntax that allows me to
> do that.
>
> Get an issues along the lines of
>
> ... iio/dac/ti,dac082s085.yaml: allOf:0: 'not' is not one of ['$ref', 'if', 'then', 'else']
>
> (obviously that's form the other driver that does this).
>
> Any suggestions much appreciated!
>
> Thanks,
>
> Jonathan
>
>
> >
> > > + not:
> > > + required: [spi-cpha, spi-cpol]
> > > + oneOf:
> > > + - required:
> > > + - spi-cpha
> > > + - required:
> > > + - spi-cpol
> > > +
> > > +examples:
> > > + - |
> > > + #include <dt-bindings/iio/adi,ad5592r.h>
> > > + spi {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + dac@0 {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + compatible = "adi,ad5755";
> > > + reg = <0>;
> > > + spi-max-frequency = <1000000>;
> > > + spi-cpha;
> > > + adi,dc-dc-phase = <0>;
> > > + adi,dc-dc-freq-hz = <410000>;
> > > + adi,dc-dc-max-microvolt = <23000000>;
> > > + channel@0 {
> > > + reg = <0>;
> > > + adi,mode = <4>;
> > > + adi,ext-current-sense-resistor;
> > > + adi,slew = <0 64000 1>;
> > > + };
> > > + channel@1 {
> > > + reg = <1>;
> > > + adi,mode = <4>;
> > > + adi,ext-current-sense-resistor;
> > > + adi,slew = <0 64000 1>;
> > > + };
> > > + channel@2 {
> > > + reg = <2>;
> > > + adi,mode = <4>;
> > > + adi,ext-current-sense-resistor;
> > > + adi,slew = <0 64000 1>;
> > > + };
> > > + channel@3 {
> > > + reg = <3>;
> > > + adi,mode = <4>;
> > > + adi,ext-current-sense-resistor;
> > > + adi,slew = <0 64000 1>;
> > > + };
> > > + };
> > > + };
> > > +...
> > > --
> > > 2.28.0
> > >
>
next prev parent reply other threads:[~2021-02-21 16:34 UTC|newest]
Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-31 18:48 [PATCH 00/46] dt-bindings:iio: yet more txt to yam conversions Jonathan Cameron
2020-10-31 18:48 ` [PATCH 01/46] dt-bindings:iio:resolver:adi,ad2s90: Conversion of binding to yaml Jonathan Cameron
2020-10-31 18:48 ` [PATCH 02/46] dt-bindings:iio:potentiometer:adi,ad5272 yaml conversion Jonathan Cameron
2020-11-02 4:48 ` Phil Reid
2020-11-03 16:10 ` Rob Herring
2020-11-03 17:28 ` Jonathan Cameron
2020-11-04 0:39 ` Phil Reid
2020-11-04 3:12 ` Rob Herring
2020-11-04 4:53 ` Phil Reid
2020-11-09 2:56 ` Phil Reid
2020-11-22 16:35 ` Jonathan Cameron
2020-11-23 23:33 ` Phil Reid
2020-10-31 18:48 ` [PATCH 03/46] dt-bindings:iio:potentiometer:microchip,mcp4131 txt to " Jonathan Cameron
2020-11-02 16:19 ` Slawomir Stepien
2020-11-03 16:11 ` Rob Herring
2020-10-31 18:48 ` [PATCH 04/46] dt-bindings:iio:potentiometer:microchip,mcp41010 " Jonathan Cameron
2020-10-31 18:48 ` [PATCH 05/46] dt-bindings:iio:impedance-analyzer:adi,ad5933 " Jonathan Cameron
2020-10-31 18:48 ` [PATCH 06/46] dt-bindings:iio:samsung,sensorhub-rinato: " Jonathan Cameron
2020-11-22 16:43 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 07/46] dt-bindings:iio:health:ti,afe4403: txt to yaml binding Jonathan Cameron
2020-11-22 17:32 ` Jonathan Cameron
2020-11-28 16:15 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 08/46] dt-bindings:iio:health:ti,afe4404: txt to yaml conversion Jonathan Cameron
2020-11-28 16:24 ` Jonathan Cameron
2020-12-18 19:42 ` Rob Herring
2020-12-30 12:21 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 09/46] dt-bindings:iio:health:maxim,max30100: " Jonathan Cameron
2020-10-31 21:41 ` Matt Ranostay
2020-11-22 16:58 ` Jonathan Cameron
2020-11-22 17:24 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 10/46] dt-bindings:iio:health:maxim,max30102: " Jonathan Cameron
2020-10-31 21:38 ` Matt Ranostay
2020-11-22 17:29 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 11/46] dt-bindings:iio:imu:adi,adis16480: " Jonathan Cameron
2020-10-31 18:48 ` [PATCH 12/46] dt-bindings:iio:imu:st,lsm6dsx: " Jonathan Cameron
2020-10-31 18:48 ` [PATCH 13/46] dt-bindings:iio:light:avago,apds9300: " Jonathan Cameron
2020-10-31 18:48 ` [PATCH 14/46] dt-bindings:iio:light:avago,apds9960: " Jonathan Cameron
2020-10-31 21:33 ` Matt Ranostay
2020-10-31 21:35 ` Matt Ranostay
2020-11-01 14:57 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 15/46] dt-bindings:iio:light:capella,cm36651: " Jonathan Cameron
2020-10-31 18:48 ` [PATCH 16/46] dt-bindings:iio:light:sharp,gp2ap020a00f: " Jonathan Cameron
2020-11-22 17:42 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 17/46] dt-bindings:iio:light:maxim,max44009: " Jonathan Cameron
2020-10-31 18:48 ` [PATCH 18/46] dt-bindings:iio:light:ti,opt3001: " Jonathan Cameron
2020-10-31 18:48 ` [PATCH 19/46] dt-bindings:iio:light:upisemi,us51882: " Jonathan Cameron
2020-11-03 16:18 ` Rob Herring
2020-10-31 18:48 ` [PATCH 20/46] dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor Jonathan Cameron
2020-10-31 18:48 ` [PATCH 21/46] dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion Jonathan Cameron
2020-11-22 17:52 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 22/46] dt-bindings:iio:light:st,vl6180: txt to yaml format conversion Jonathan Cameron
2020-11-01 15:26 ` Manivannan Sadhasivam
2020-10-31 18:48 ` [PATCH 23/46] dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion Jonathan Cameron
2020-10-31 18:48 ` [PATCH 24/46] dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion Jonathan Cameron
2020-11-04 14:47 ` Linus Walleij
2020-11-08 15:55 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 25/46] dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion Jonathan Cameron
2020-10-31 18:48 ` [PATCH 26/46] dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion Jonathan Cameron
2020-10-31 18:48 ` [PATCH 27/46] dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion Jonathan Cameron
2020-10-31 18:48 ` [PATCH 28/46] dt-bindings:iio:adc:atmel,sama5d2-adc: " Jonathan Cameron
2020-11-22 18:07 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 29/46] dt-bindings:iio:adc:atmel,sama9260-adc: conversion to yaml from at91_adc.txt Jonathan Cameron
2020-11-13 9:22 ` Alexandre Belloni
2020-11-14 15:37 ` Jonathan Cameron
2020-11-22 18:09 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 30/46] dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion Jonathan Cameron
2020-11-03 16:26 ` Rob Herring
2020-11-27 8:14 ` Geert Uytterhoeven
2020-10-31 18:48 ` [PATCH 31/46] dt-bindings:iio:adc:x-powers,axp209-adc: " Jonathan Cameron
2020-11-22 18:15 ` Jonathan Cameron
2020-11-23 3:02 ` Chen-Yu Tsai
2020-11-23 20:36 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 32/46] dt-bindings:iio:adc:brcm,iproc-static-adc: " Jonathan Cameron
2020-10-31 18:48 ` [PATCH 33/46] dt-bindings:iio:adc:mediatek,mt2701-auxadc: rename and " Jonathan Cameron
2020-10-31 18:48 ` [PATCH 34/46] dt-bindings:iio:adc:ti,palmas-gpadc: txt to yaml format conversion Jonathan Cameron
2020-11-22 18:20 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 35/46] dt-bindings:iio:adc:qcom,pm8018-adc: yaml conversion and rename Jonathan Cameron
2020-11-04 14:51 ` Linus Walleij
2020-10-31 18:48 ` [PATCH 36/46] dt-bindings:iio:adc:qcom,spmi-iadc: txt to yaml format conversion Jonathan Cameron
2020-11-22 18:25 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 37/46] dt-binding:iio:adc:ti,ads124s08: " Jonathan Cameron
2020-11-02 12:49 ` Dan Murphy
2020-11-08 16:59 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 38/46] dt-bindings:iio:dac:ad5592r: " Jonathan Cameron
2020-11-03 16:31 ` Rob Herring
2020-11-22 18:38 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 39/46] dt-bindings:iio:dac:ad5755: " Jonathan Cameron
2020-11-03 16:32 ` Rob Herring
2020-11-22 18:40 ` Jonathan Cameron
2021-02-21 16:33 ` Jonathan Cameron [this message]
2020-10-31 18:48 ` [PATCH 40/46] dt-bindings:iio:accel:bosch,bma180: " Jonathan Cameron
2020-11-22 18:44 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 41/46] dt-bindings:iio:accel:kionix,kxcjk1013: " Jonathan Cameron
2020-10-31 18:48 ` [PATCH 42/46] dt-bindings:iio:accel:fsl,mma8452: txt to yaml conversion Jonathan Cameron
2020-11-03 16:34 ` Rob Herring
2020-11-22 18:50 ` Jonathan Cameron
2020-10-31 18:48 ` [PATCH 43/46] dt-bindings:iio:gyro:bosch,bmg180: txt to yaml format conversion Jonathan Cameron
2020-10-31 18:48 ` [PATCH 44/46] dt-bindings:iio:st,st-sensors: txt to yaml conversion Jonathan Cameron
2020-11-02 16:16 ` Denis CIOCCA
2020-10-31 18:48 ` [PATCH 45/46] dt-bindings:iio:frequency:adi,adf4350: txt to yaml format conversion Jonathan Cameron
2020-10-31 18:48 ` [PATCH 46/46] dt-bindings:iio:temperature: Drop generic binding file Jonathan Cameron
2020-11-03 16:38 ` [PATCH 00/46] dt-bindings:iio: yet more txt to yam conversions Rob Herring
2020-11-03 17:24 ` Jonathan Cameron
2020-11-22 18:59 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210221163345.6a174531@archlinux \
--to=jic23@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sean.nyekjaer@prevas.dk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).