From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Sebastian Reichel <sre@kernel.org>, Rob Herring <robh+dt@kernel.org>
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sebastian Reichel <sebastian.reichel@collabora.com>,
kernel@collabora.com
Subject: [PATCH 11/38] dt-bindings: power: supply: sbs-manager: Convert to DT schema format
Date: Fri, 12 Mar 2021 16:43:30 +0100 [thread overview]
Message-ID: <20210312154357.1561730-12-sebastian.reichel@collabora.com> (raw)
In-Reply-To: <20210312154357.1561730-1-sebastian.reichel@collabora.com>
Convert the binding to DT schema format.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
.../bindings/power/supply/sbs,sbs-manager.txt | 66 -----------
.../power/supply/sbs,sbs-manager.yaml | 111 ++++++++++++++++++
2 files changed, 111 insertions(+), 66 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt
create mode 100644 Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt
deleted file mode 100644
index 4b2195571a49..000000000000
--- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Binding for sbs-manager
-
-Required properties:
-- compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part
- number compatible string might be used in order to take care of vendor
- specific registers.
-- reg: integer, i2c address of the device. Should be <0xa>.
-Optional properties:
-- gpio-controller: Marks the port as GPIO controller.
- See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
-- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell
- is used to specify optional parameters:
- See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
-
-From OS view the device is basically an i2c-mux used to communicate with up to
-four smart battery devices at address 0xb. The driver actually implements this
-behaviour. So standard i2c-mux nodes can be used to register up to four slave
-batteries. Channels will be numerated starting from 1 to 4.
-
-Example:
-
-batman@a {
- compatible = "lltc,ltc1760", "sbs,sbs-manager";
- reg = <0x0a>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- battery@b {
- compatible = "ti,bq2060", "sbs,sbs-battery";
- reg = <0x0b>;
- sbs,battery-detect-gpios = <&batman 1 1>;
- };
- };
-
- i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
-
- battery@b {
- compatible = "ti,bq2060", "sbs,sbs-battery";
- reg = <0x0b>;
- sbs,battery-detect-gpios = <&batman 2 1>;
- };
- };
-
- i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- battery@b {
- compatible = "ti,bq2060", "sbs,sbs-battery";
- reg = <0x0b>;
- sbs,battery-detect-gpios = <&batman 3 1>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
new file mode 100644
index 000000000000..592c476d83e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant manger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - lltc,ltc1760
+ - enum:
+ - sbs,sbs-manager
+ - items:
+ - const: sbs,sbs-manager
+
+ reg:
+ const: 0xa
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+dependencies:
+ '#gpio-cells': [gpio-controller]
+ gpio-controller: ['#gpio-cells']
+
+patternProperties:
+ "^i2c@[1-4]$":
+ type: object
+
+ allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ batman: battery-manager@a {
+ compatible = "lltc,ltc1760", "sbs,sbs-manager";
+ reg = <0x0a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ battery@b {
+ compatible = "ti,bq20z65", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 1 1>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ battery@b {
+ compatible = "ti,bq20z65", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 2 1>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ battery@b {
+ compatible = "ti,bq20z65", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 3 1>;
+ };
+ };
+ };
+ };
--
2.30.1
next prev parent reply other threads:[~2021-03-12 15:45 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-12 15:43 [PATCH 00/38] Convert power-supply DT bindings to YAML Sebastian Reichel
2021-03-12 15:43 ` [PATCH 01/38] ARM: dts: motorola-cpcap-mapphone: Prepare for dtbs_check parsing Sebastian Reichel
2021-03-12 15:43 ` [PATCH 02/38] dt-bindings: power: supply: cpcap-battery: Convert to DT schema format Sebastian Reichel
2021-03-12 15:43 ` [PATCH 03/38] dt-bindings: power: supply: cpcap-charger: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 04/38] dt-bindings: power: supply: bq25890: " Sebastian Reichel
2021-03-15 18:21 ` Rob Herring
2021-03-16 16:46 ` Sebastian Reichel
2021-03-16 17:50 ` Rob Herring
2021-03-12 15:43 ` [PATCH 05/38] dt-bindings: power: supply: bq24257: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 06/38] dt-bindings: power: supply: bq24190: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 07/38] dt-bindings: power: supply: bq2415x: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 08/38] dt-bindings: power: supply: bq24735: " Sebastian Reichel
2021-03-15 18:24 ` Rob Herring
2021-03-16 16:22 ` Sebastian Reichel
2021-03-16 17:45 ` Rob Herring
2021-03-12 15:43 ` [PATCH 09/38] dt-bindings: power: supply: isp1704: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 10/38] dt-bindings: power: supply: sbs-charger: " Sebastian Reichel
2021-03-12 15:43 ` Sebastian Reichel [this message]
2021-03-15 18:27 ` [PATCH 11/38] dt-bindings: power: supply: sbs-manager: " Rob Herring
2021-03-12 15:43 ` [PATCH 12/38] dt-bindings: power: supply: ds2760: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 13/38] dt-bindings: power: supply: sc27xx-fg: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 14/38] dt-bindings: power: supply: sc2731-charger: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 15/38] dt-bindings: power: supply: tps65090: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 16/38] dt-bindings: power: supply: tps65217: " Sebastian Reichel
2021-03-15 18:33 ` Rob Herring
2021-03-16 16:20 ` Sebastian Reichel
2021-03-16 17:52 ` Rob Herring
2021-03-12 15:43 ` [PATCH 17/38] dt-bindings: power: supply: twl4030: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 18/38] dt-bindings: power: supply: n900-battery: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 19/38] dt-bindings: power: supply: lego-ev3-battery: " Sebastian Reichel
2021-03-12 16:04 ` David Lechner
2021-03-12 15:43 ` [PATCH 20/38] dt-bindings: power: supply: max17040: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 21/38] dt-bindings: power: supply: max14656: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 22/38] dt-bindings: power: supply: max17042: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 23/38] dt-bindings: power: supply: max8903: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 24/38] dt-bindings: power: supply: ucs1002: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 25/38] dt-bindings: power: supply: pm8941-charger: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 26/38] dt-bindings: power: supply: pm8941-coincell: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 27/38] dt-bindings: power: supply: act8945a: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 28/38] dt-bindings: power: supply: axp20x: " Sebastian Reichel
2021-03-24 3:02 ` Chen-Yu Tsai
2021-03-12 15:43 ` [PATCH 29/38] dt-bindings: power: supply: da9150: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 30/38] dt-bindings: power: supply: lp8727: " Sebastian Reichel
2021-03-15 18:37 ` Rob Herring
2021-03-12 15:43 ` [PATCH 31/38] dt-bindings: power: supply: lt3651: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 32/38] dt-bindings: power: supply: ltc294x: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 33/38] dt-bindings: power: supply: rt9455: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 34/38] dt-bindings: power: supply: olpc-battery: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 35/38] dt-bindings: power: supply: ab8500: " Sebastian Reichel
2021-03-12 15:43 ` [PATCH 36/38] dt-bindings: power: supply: sbs-battery: Fix dtbs_check Sebastian Reichel
2021-03-12 15:43 ` [PATCH 37/38] dt-bindings: power: supply: Fix remaining battery.txt links Sebastian Reichel
2021-03-12 15:43 ` [PATCH 38/38] dt-bindings: power: supply: Drop power_supply.txt Sebastian Reichel
2021-03-15 19:44 ` [PATCH 00/38] Convert power-supply DT bindings to YAML Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210312154357.1561730-12-sebastian.reichel@collabora.com \
--to=sebastian.reichel@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).