* [PATCH 1/1] arm: dts: owl-s500-roseapplepi: Add ATC2603C PMIC
@ 2021-03-12 9:49 Cristian Ciocaltea
2021-04-01 5:29 ` Manivannan Sadhasivam
2021-04-01 5:43 ` Manivannan Sadhasivam
0 siblings, 2 replies; 5+ messages in thread
From: Cristian Ciocaltea @ 2021-03-12 9:49 UTC (permalink / raw)
To: Rob Herring, Andreas Färber, Manivannan Sadhasivam
Cc: devicetree, linux-arm-kernel, linux-actions, linux-kernel
Add device tree node for ATC2603C PMIC and remove the 'fixed-3.1V'
dummy regulator used for the uSD supply.
Additionally, add 'SYSPWR' fixed regulator and provide cpu0 supply.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
---
Please note the patch depends on the ATC260x PMIC support which is queued
for merging in v5.13:
https://lore.kernel.org/lkml/cover.1611653995.git.cristian.ciocaltea@gmail.com/
https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git/log/?h=for-mfd-next&qt=range&q=a38fd8748464831584a19438cbb3082b5a2dab15..eac013a0b7041f5cfc8feedf429a767675350102
arch/arm/boot/dts/owl-s500-roseapplepi.dts | 132 ++++++++++++++++++++-
1 file changed, 126 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
index ff91561ca99c..b8c5db2344aa 100644
--- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts
+++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
@@ -2,7 +2,7 @@
/*
* Roseapple Pi
*
- * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ * Copyright (C) 2020-2021 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
*/
/dts-v1/;
@@ -27,20 +27,140 @@ memory@0 {
reg = <0x0 0x80000000>; /* 2GB */
};
- /* Fixed regulator used in the absence of PMIC */
- sd_vcc: sd-vcc {
+ syspwr: regulator-5v0 {
compatible = "regulator-fixed";
- regulator-name = "fixed-3.1V";
- regulator-min-microvolt = <3100000>;
- regulator-max-microvolt = <3100000>;
+ regulator-name = "SYSPWR";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
regulator-always-on;
};
};
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
&i2c0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
+
+ atc260x: pmic@65 {
+ compatible = "actions,atc2603c";
+ reg = <0x65>;
+ interrupt-parent = <&sirq>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+ reset-time-sec = <6>;
+
+ regulators {
+ compatible = "actions,atc2603c-regulator";
+
+ dcdc1-supply = <&syspwr>;
+ dcdc2-supply = <&syspwr>;
+ dcdc3-supply = <&syspwr>;
+ ldo1-supply = <&syspwr>;
+ ldo2-supply = <&syspwr>;
+ ldo3-supply = <&syspwr>;
+ ldo5-supply = <&syspwr>;
+ ldo6-supply = <&syspwr>;
+ ldo7-supply = <&syspwr>;
+ ldo8-supply = <&syspwr>;
+ ldo11-supply = <&syspwr>;
+ ldo12-supply = <&syspwr>;
+ switchldo1-supply = <&vcc>;
+
+ vdd_cpu: dcdc1 {
+ regulator-name = "VDD_CPU";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ vddq: dcdc2 {
+ regulator-name = "VDDQ";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc: dcdc3 {
+ regulator-name = "VCC";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_3v3: ldo1 {
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ avcc: ldo2 {
+ regulator-name = "AVCC";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_1v8: ldo3 {
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ vcc_3v1: ldo5 {
+ regulator-name = "VCC_3V1";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ avdd: ldo6 {
+ regulator-name = "AVDD";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ sens_1v8: ldo7 {
+ regulator-name = "SENS_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8: ldo8 {
+ regulator-name = "LDO8";
+ regulator-min-microvolt = <2300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ svcc: ldo11 {
+ regulator-name = "SVCC";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ rtc_vdd: ldo12 {
+ regulator-name = "RTC_VDD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ sd_vcc: switchldo1 {
+ regulator-name = "SD_VCC";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
};
&i2c1 {
--
2.30.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] arm: dts: owl-s500-roseapplepi: Add ATC2603C PMIC
2021-03-12 9:49 [PATCH 1/1] arm: dts: owl-s500-roseapplepi: Add ATC2603C PMIC Cristian Ciocaltea
@ 2021-04-01 5:29 ` Manivannan Sadhasivam
2021-04-01 9:44 ` Cristian Ciocaltea
2021-04-01 5:43 ` Manivannan Sadhasivam
1 sibling, 1 reply; 5+ messages in thread
From: Manivannan Sadhasivam @ 2021-04-01 5:29 UTC (permalink / raw)
To: Cristian Ciocaltea
Cc: Rob Herring, Andreas Färber, devicetree, linux-arm-kernel,
linux-actions, linux-kernel
On Fri, Mar 12, 2021 at 11:49:27AM +0200, Cristian Ciocaltea wrote:
> Add device tree node for ATC2603C PMIC and remove the 'fixed-3.1V'
> dummy regulator used for the uSD supply.
>
> Additionally, add 'SYSPWR' fixed regulator and provide cpu0 supply.
>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Thanks,
Mani
> ---
> Please note the patch depends on the ATC260x PMIC support which is queued
> for merging in v5.13:
>
> https://lore.kernel.org/lkml/cover.1611653995.git.cristian.ciocaltea@gmail.com/
> https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git/log/?h=for-mfd-next&qt=range&q=a38fd8748464831584a19438cbb3082b5a2dab15..eac013a0b7041f5cfc8feedf429a767675350102
>
> arch/arm/boot/dts/owl-s500-roseapplepi.dts | 132 ++++++++++++++++++++-
> 1 file changed, 126 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> index ff91561ca99c..b8c5db2344aa 100644
> --- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> +++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> @@ -2,7 +2,7 @@
> /*
> * Roseapple Pi
> *
> - * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
> + * Copyright (C) 2020-2021 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
> */
>
> /dts-v1/;
> @@ -27,20 +27,140 @@ memory@0 {
> reg = <0x0 0x80000000>; /* 2GB */
> };
>
> - /* Fixed regulator used in the absence of PMIC */
> - sd_vcc: sd-vcc {
> + syspwr: regulator-5v0 {
> compatible = "regulator-fixed";
> - regulator-name = "fixed-3.1V";
> - regulator-min-microvolt = <3100000>;
> - regulator-max-microvolt = <3100000>;
> + regulator-name = "SYSPWR";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> regulator-always-on;
> };
> };
>
> +&cpu0 {
> + cpu0-supply = <&vdd_cpu>;
> +};
> +
> &i2c0 {
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
> +
> + atc260x: pmic@65 {
> + compatible = "actions,atc2603c";
> + reg = <0x65>;
> + interrupt-parent = <&sirq>;
> + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
> +
> + reset-time-sec = <6>;
> +
> + regulators {
> + compatible = "actions,atc2603c-regulator";
> +
> + dcdc1-supply = <&syspwr>;
> + dcdc2-supply = <&syspwr>;
> + dcdc3-supply = <&syspwr>;
> + ldo1-supply = <&syspwr>;
> + ldo2-supply = <&syspwr>;
> + ldo3-supply = <&syspwr>;
> + ldo5-supply = <&syspwr>;
> + ldo6-supply = <&syspwr>;
> + ldo7-supply = <&syspwr>;
> + ldo8-supply = <&syspwr>;
> + ldo11-supply = <&syspwr>;
> + ldo12-supply = <&syspwr>;
> + switchldo1-supply = <&vcc>;
> +
> + vdd_cpu: dcdc1 {
> + regulator-name = "VDD_CPU";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-always-on;
> + };
> +
> + vddq: dcdc2 {
> + regulator-name = "VDDQ";
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <2150000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vcc: dcdc3 {
> + regulator-name = "VCC";
> + regulator-min-microvolt = <2600000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vcc_3v3: ldo1 {
> + regulator-name = "VCC_3V3";
> + regulator-min-microvolt = <2600000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + avcc: ldo2 {
> + regulator-name = "AVCC";
> + regulator-min-microvolt = <2600000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vdd_1v8: ldo3 {
> + regulator-name = "VDD_1V8";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-always-on;
> + };
> +
> + vcc_3v1: ldo5 {
> + regulator-name = "VCC_3V1";
> + regulator-min-microvolt = <2600000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + avdd: ldo6 {
> + regulator-name = "AVDD";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-always-on;
> + };
> +
> + sens_1v8: ldo7 {
> + regulator-name = "SENS_1V8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo8: ldo8 {
> + regulator-name = "LDO8";
> + regulator-min-microvolt = <2300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + svcc: ldo11 {
> + regulator-name = "SVCC";
> + regulator-min-microvolt = <2600000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + rtc_vdd: ldo12 {
> + regulator-name = "RTC_VDD";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + sd_vcc: switchldo1 {
> + regulator-name = "SD_VCC";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + };
> + };
> };
>
> &i2c1 {
> --
> 2.30.2
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] arm: dts: owl-s500-roseapplepi: Add ATC2603C PMIC
2021-03-12 9:49 [PATCH 1/1] arm: dts: owl-s500-roseapplepi: Add ATC2603C PMIC Cristian Ciocaltea
2021-04-01 5:29 ` Manivannan Sadhasivam
@ 2021-04-01 5:43 ` Manivannan Sadhasivam
2021-04-01 9:59 ` Cristian Ciocaltea
1 sibling, 1 reply; 5+ messages in thread
From: Manivannan Sadhasivam @ 2021-04-01 5:43 UTC (permalink / raw)
To: Cristian Ciocaltea
Cc: Rob Herring, Andreas Färber, devicetree, linux-arm-kernel,
linux-actions, linux-kernel
On Fri, Mar 12, 2021 at 11:49:27AM +0200, Cristian Ciocaltea wrote:
> Add device tree node for ATC2603C PMIC and remove the 'fixed-3.1V'
> dummy regulator used for the uSD supply.
>
> Additionally, add 'SYSPWR' fixed regulator and provide cpu0 supply.
>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Applied to for-next after fixing the patch subject as below:
"ARM: dts: owl-s500-roseapplepi: Add ATC2603C PMIC"
Thanks,
Mani
> ---
> Please note the patch depends on the ATC260x PMIC support which is queued
> for merging in v5.13:
>
> https://lore.kernel.org/lkml/cover.1611653995.git.cristian.ciocaltea@gmail.com/
> https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git/log/?h=for-mfd-next&qt=range&q=a38fd8748464831584a19438cbb3082b5a2dab15..eac013a0b7041f5cfc8feedf429a767675350102
>
> arch/arm/boot/dts/owl-s500-roseapplepi.dts | 132 ++++++++++++++++++++-
> 1 file changed, 126 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> index ff91561ca99c..b8c5db2344aa 100644
> --- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> +++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> @@ -2,7 +2,7 @@
> /*
> * Roseapple Pi
> *
> - * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
> + * Copyright (C) 2020-2021 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
> */
>
> /dts-v1/;
> @@ -27,20 +27,140 @@ memory@0 {
> reg = <0x0 0x80000000>; /* 2GB */
> };
>
> - /* Fixed regulator used in the absence of PMIC */
> - sd_vcc: sd-vcc {
> + syspwr: regulator-5v0 {
> compatible = "regulator-fixed";
> - regulator-name = "fixed-3.1V";
> - regulator-min-microvolt = <3100000>;
> - regulator-max-microvolt = <3100000>;
> + regulator-name = "SYSPWR";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> regulator-always-on;
> };
> };
>
> +&cpu0 {
> + cpu0-supply = <&vdd_cpu>;
> +};
> +
> &i2c0 {
> status = "okay";
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
> +
> + atc260x: pmic@65 {
> + compatible = "actions,atc2603c";
> + reg = <0x65>;
> + interrupt-parent = <&sirq>;
> + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
> +
> + reset-time-sec = <6>;
> +
> + regulators {
> + compatible = "actions,atc2603c-regulator";
> +
> + dcdc1-supply = <&syspwr>;
> + dcdc2-supply = <&syspwr>;
> + dcdc3-supply = <&syspwr>;
> + ldo1-supply = <&syspwr>;
> + ldo2-supply = <&syspwr>;
> + ldo3-supply = <&syspwr>;
> + ldo5-supply = <&syspwr>;
> + ldo6-supply = <&syspwr>;
> + ldo7-supply = <&syspwr>;
> + ldo8-supply = <&syspwr>;
> + ldo11-supply = <&syspwr>;
> + ldo12-supply = <&syspwr>;
> + switchldo1-supply = <&vcc>;
> +
> + vdd_cpu: dcdc1 {
> + regulator-name = "VDD_CPU";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-always-on;
> + };
> +
> + vddq: dcdc2 {
> + regulator-name = "VDDQ";
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <2150000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vcc: dcdc3 {
> + regulator-name = "VCC";
> + regulator-min-microvolt = <2600000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vcc_3v3: ldo1 {
> + regulator-name = "VCC_3V3";
> + regulator-min-microvolt = <2600000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + avcc: ldo2 {
> + regulator-name = "AVCC";
> + regulator-min-microvolt = <2600000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + vdd_1v8: ldo3 {
> + regulator-name = "VDD_1V8";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-always-on;
> + };
> +
> + vcc_3v1: ldo5 {
> + regulator-name = "VCC_3V1";
> + regulator-min-microvolt = <2600000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + avdd: ldo6 {
> + regulator-name = "AVDD";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-always-on;
> + };
> +
> + sens_1v8: ldo7 {
> + regulator-name = "SENS_1V8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + ldo8: ldo8 {
> + regulator-name = "LDO8";
> + regulator-min-microvolt = <2300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + svcc: ldo11 {
> + regulator-name = "SVCC";
> + regulator-min-microvolt = <2600000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + rtc_vdd: ldo12 {
> + regulator-name = "RTC_VDD";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + sd_vcc: switchldo1 {
> + regulator-name = "SD_VCC";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + };
> + };
> };
>
> &i2c1 {
> --
> 2.30.2
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] arm: dts: owl-s500-roseapplepi: Add ATC2603C PMIC
2021-04-01 5:29 ` Manivannan Sadhasivam
@ 2021-04-01 9:44 ` Cristian Ciocaltea
0 siblings, 0 replies; 5+ messages in thread
From: Cristian Ciocaltea @ 2021-04-01 9:44 UTC (permalink / raw)
To: Manivannan Sadhasivam
Cc: Rob Herring, Andreas Färber, devicetree, linux-arm-kernel,
linux-actions, linux-kernel
On Thu, Apr 01, 2021 at 10:59:29AM +0530, Manivannan Sadhasivam wrote:
> On Fri, Mar 12, 2021 at 11:49:27AM +0200, Cristian Ciocaltea wrote:
> > Add device tree node for ATC2603C PMIC and remove the 'fixed-3.1V'
> > dummy regulator used for the uSD supply.
> >
> > Additionally, add 'SYSPWR' fixed regulator and provide cpu0 supply.
> >
> > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
>
> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Thanks for reviewing,
Cristi
> Thanks,
> Mani
[...]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/1] arm: dts: owl-s500-roseapplepi: Add ATC2603C PMIC
2021-04-01 5:43 ` Manivannan Sadhasivam
@ 2021-04-01 9:59 ` Cristian Ciocaltea
0 siblings, 0 replies; 5+ messages in thread
From: Cristian Ciocaltea @ 2021-04-01 9:59 UTC (permalink / raw)
To: Manivannan Sadhasivam
Cc: Rob Herring, Andreas Färber, devicetree, linux-arm-kernel,
linux-actions, linux-kernel
On Thu, Apr 01, 2021 at 11:13:00AM +0530, Manivannan Sadhasivam wrote:
> On Fri, Mar 12, 2021 at 11:49:27AM +0200, Cristian Ciocaltea wrote:
> > Add device tree node for ATC2603C PMIC and remove the 'fixed-3.1V'
> > dummy regulator used for the uSD supply.
> >
> > Additionally, add 'SYSPWR' fixed regulator and provide cpu0 supply.
> >
> > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
>
> Applied to for-next after fixing the patch subject as below:
>
> "ARM: dts: owl-s500-roseapplepi: Add ATC2603C PMIC"
I encountered commits with both "ARM: dts:" and "arm: dts:" prefixes,
so I wasn't sure if there is a preferred format.
I have just counted the no. of occurrences in git log for both variants
and it seems the former is indeed more common, so I will make sure to
use "ARM: ..." from now on.
Thanks for noticing this,
Cristi
> Thanks,
> Mani
[...]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-04-01 10:00 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-12 9:49 [PATCH 1/1] arm: dts: owl-s500-roseapplepi: Add ATC2603C PMIC Cristian Ciocaltea
2021-04-01 5:29 ` Manivannan Sadhasivam
2021-04-01 9:44 ` Cristian Ciocaltea
2021-04-01 5:43 ` Manivannan Sadhasivam
2021-04-01 9:59 ` Cristian Ciocaltea
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).