From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Rob Herring <robh+dt@kernel.org>, Jonathan Cameron <jic23@kernel.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Pengutronix Kernel Team <kernel@pengutronix.de>,
David Jander <david@protonic.nl>,
Robin van der Gracht <robin@protonic.nl>,
linux-iio@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Subject: [PATCH v6 0/3] mainline ti tsc2046 adc driver
Date: Wed, 28 Apr 2021 09:32:05 +0200 [thread overview]
Message-ID: <20210428073208.19570-1-o.rempel@pengutronix.de> (raw)
changes v6:
- get blessing from Dmitry Torokhov
- rebase against latest iio/testing
- use simple name for iio_dev->name
- use Jonathan's version for oversampling-ratio description
changes v5:
- remove type for the settling-time-us property
changes v4:
- spell fixes
- add more comments
- make code more readable
- move scan_buf to the priv
- use FIELD_GET to extract ADC data
- make some multi line code as one line
- do not use atomic API for trig_more_count
- fix build warning on 64bit system
- add NULL check for the devm_kasprintf()
- use return devm_iio_device_register(), without additional error
printing.
changes v3:
- different spell fixes
- add some notes about driver structure
- rename the trigger to point on the touchscreen nature of it
- rename DT binding to oversampling-ratio
- make sure we have some defaults in case no DT property is set
changes v2:
- rework and extend DT binding properties
- remove touchscreen related code from the IIO ADC driver
- make trigger be active longer then IRQ is requesting. This is needed
to get "inactive" samples
- make oversampling and settle time configurable
TI TSC2046 is a touchscreen controller based on 8 channel ADC. Since most of
this ADC based touchscreen controller share same set of challenges, it
is better keep then as simple IIO ADC devices attached to a generic
resistive-adc-touch driver.
This driver can replace drivers/input/touchscreen/ads7846.c and has
following advantages over it:
- less code to maintain
- shared code paths (resistive-adc-touch, iio-hwmon, etc)
- can be used as plain IIO ADC to investigate signaling issues or test
real capacity of the plates and attached low-pass filters
(or use the touchscreen as a microphone if you like ;) )
Oleksij Rempel (3):
dt-bindings:iio:adc: add generic settling-time-us and
oversampling-ratio channel properties
dt-bindings:iio:adc: add documentation for TI TSC2046 controller
iio: adc: add ADC driver for the TI TSC2046 controller
.../devicetree/bindings/iio/adc/adc.yaml | 12 +
.../bindings/iio/adc/ti,tsc2046.yaml | 115 +++
MAINTAINERS | 8 +
drivers/iio/adc/Kconfig | 12 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ti-tsc2046.c | 720 ++++++++++++++++++
6 files changed, 868 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
create mode 100644 drivers/iio/adc/ti-tsc2046.c
--
2.29.2
next reply other threads:[~2021-04-28 7:32 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-28 7:32 Oleksij Rempel [this message]
2021-04-28 7:32 ` [PATCH v6 1/3] dt-bindings:iio:adc: add generic settling-time-us and oversampling-ratio channel properties Oleksij Rempel
2021-04-28 16:59 ` Jonathan Cameron
2021-04-29 4:26 ` Oleksij Rempel
2021-04-30 20:11 ` Rob Herring
2021-04-28 7:32 ` [PATCH v6 2/3] dt-bindings:iio:adc: add documentation for TI TSC2046 controller Oleksij Rempel
2021-04-28 7:32 ` [PATCH v6 3/3] iio: adc: add ADC driver for the " Oleksij Rempel
2021-04-28 16:56 ` Jonathan Cameron
2021-05-03 11:28 ` [PATCH v6 0/3] mainline ti tsc2046 adc driver Jonathan Cameron
2021-05-14 7:57 ` Oleksij Rempel
2021-05-14 8:15 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210428073208.19570-1-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=david@protonic.nl \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jic23@kernel.org \
--cc=kernel@pengutronix.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=robin@protonic.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).