[PATCH 2/2] arm64: dts: qcom: msm8996: Add support for the CBF clock

* [PATCH 2/2] arm64: dts: qcom: msm8996: Add support for the CBF clock
       [not found] <20210528192541.1120703-1-konrad.dybcio@somainline.org>
@ 2021-05-28 19:25 ` Konrad Dybcio
  0 siblings, 0 replies; only message in thread
From: Konrad Dybcio @ 2021-05-28 19:25 UTC (permalink / raw)
  To: ~postmarketos/upstreaming
  Cc: martin.botka, angelogioacchino.delregno, marijn.suijten,
	jamipkettunen, Konrad Dybcio, Andy Gross, Bjorn Andersson,
	Michael Turquette, Stephen Boyd, linux-arm-msm, linux-clk,
	linux-kernel, Rob Herring, devicetree

Add the CBF PLL register to the kryocc node and assign a frequency
to the clock.

This makes sure the core cluster interconnect is running at a decent
speed, so that it's no longer a pain to use the device with all cores
enabled.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 10e6fecc9e13..99dc4068980d 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2533,7 +2533,10 @@ apss_merge_funnel_out: endpoint {
 
 		kryocc: clock-controller@6400000 {
 			compatible = "qcom,msm8996-apcc";
-			reg = <0x06400000 0x90000>;
+			reg = <0x06400000 0x90000>, <0x09a11000 0x10000>;
+
+			assigned-clocks = <&kryocc 2>;
+			assigned-clock-rates = <1382400000>;
 
 			clock-names = "xo";
 			clocks = <&xo_board>;
-- 
2.31.1


^ permalink raw reply related	[flat|nested] only message in thread