[PATCH v2 0/2] hwmon: Add StarFive JH7100 temperature sensor

[PATCH v2 0/2] hwmon: Add StarFive JH7100 temperature sensor

[Emil Renner Berthing]

From: Emil Renner Berthing <kernel@esmil.dk>

This adds a driver for the temperature sensor on the JH7100, a RISC-V
SoC by StarFive Technology Co. Ltd., and most likely also the upcoming
JH7110 version.

The SoC is used on the BeagleV Starlight board:
https://github.com/beagleboard/beaglev-starlight

Support for this SoC is not yet upstreamed, but is actively worked on,
so it should only be a matter of time before that happens.

v2:
* Fix checkpatch.pl --strict warnings
  - Add myself to MAINTAINERS
  - Fix multiline comments
  - Use proper case and whitespace for #defines
  - Add comment to sfctemp::lock mutex.
* Remaining comments by Guenter Roeck
  - Add Documentation/hwmon/sfctemp.rst
  - Use devm_add_action() and devm_hwmon_device_register_with_info()
    instead of a driver .remove function.
  - Don't do test conversion at probe time.
  - #include <linux/io.h>
  - Remove unused #defines
  - Use int return variable in sfctemp_convert().
* Add Samin's Signed-off-by to patch 2/2

Emil Renner Berthing (2):
  dt-bindings: hwmon: add starfive,jh7100-temp bindings
  hwmon: (sfctemp) Add StarFive JH7100 temperature sensor

 .../bindings/hwmon/starfive,jh7100-temp.yaml  |  43 +++
 Documentation/hwmon/index.rst                 |   1 +
 Documentation/hwmon/sfctemp.rst               |  32 ++
 MAINTAINERS                                   |   8 +
 drivers/hwmon/Kconfig                         |  10 +
 drivers/hwmon/Makefile                        |   1 +
 drivers/hwmon/sfctemp.c                       | 288 ++++++++++++++++++
 7 files changed, 383 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml
 create mode 100644 Documentation/hwmon/sfctemp.rst
 create mode 100644 drivers/hwmon/sfctemp.c

-- 
2.32.0

[PATCH v2 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings

[Emil Renner Berthing]

From: Emil Renner Berthing <kernel@esmil.dk>

Add bindings for the temperature sensor on the StarFive JH7100 SoC.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
---
 .../bindings/hwmon/starfive,jh7100-temp.yaml  | 43 +++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml b/Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml
new file mode 100644
index 000000000000..5ca52c08d142
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/starfive,jh7100-temp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Temperature Sensor
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+description: |
+  StarFive Technology Co. JH7100 embedded temperature sensor
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7100-temp
+
+  reg:
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    tmon: tmon@124a0000 {
+        compatible = "starfive,jh7100-temp";
+        reg = <0x124a0000 0x10000>;
+        #thermal-sensor-cells = <0>;
+        interrupts = <122>;
+    };
-- 
2.32.0

[PATCH v2 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor

[Emil Renner Berthing]

From: Emil Renner Berthing <kernel@esmil.dk>

Register definitions and conversion constants based on sfctemp driver by
Samin in the StarFive 5.10 kernel.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
---
 Documentation/hwmon/index.rst   |   1 +
 Documentation/hwmon/sfctemp.rst |  32 ++++
 MAINTAINERS                     |   8 +
 drivers/hwmon/Kconfig           |  10 ++
 drivers/hwmon/Makefile          |   1 +
 drivers/hwmon/sfctemp.c         | 288 ++++++++++++++++++++++++++++++++
 6 files changed, 340 insertions(+)
 create mode 100644 Documentation/hwmon/sfctemp.rst
 create mode 100644 drivers/hwmon/sfctemp.c

diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 9ed60fa84cbe..f23308e97d2e 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -161,6 +161,7 @@ Hardware Monitoring Kernel Drivers
    sch5627
    sch5636
    scpi-hwmon
+   sfctemp
    sht15
    sht21
    sht3x
diff --git a/Documentation/hwmon/sfctemp.rst b/Documentation/hwmon/sfctemp.rst
new file mode 100644
index 000000000000..465edce2fea5
--- /dev/null
+++ b/Documentation/hwmon/sfctemp.rst
@@ -0,0 +1,32 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver sfctemp
+=====================
+
+Supported chips:
+ - StarFive JH7100
+
+Authors:
+ - Emil Renner Berthing <kernel@esmil.dk>
+
+Description
+-----------
+
+This driver adds support for reading the built-in temperature sensor on the
+JH7100 RISC-V SoC by StarFive Technology Co. Ltd.
+
+``sysfs`` interface
+-------------------
+
+The temperature sensor can be enabled, disabled and queried via the standard
+hwmon interface in sysfs under ``/sys/class/hwmon/hwmonX`` for some value of
+``X``:
+
+================ ==== =============================================
+Name             Perm Description
+================ ==== =============================================
+temp1_enable     RW   Enable or disable temperature sensor.
+                      Automatically enabled by the driver,
+                      but may be disabled to save power.
+temp1_input      RO   Temperature reading in milli-degrees Celsius.
+================ ==== =============================================
diff --git a/MAINTAINERS b/MAINTAINERS
index 8c5ee008301a..a7d25a672270 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16535,6 +16535,14 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/sfc/
 
+SFCTEMP HWMON DRIVER
+M:	Emil Renner Berthing <kernel@esmil.dk>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml
+F:	Documentation/hwmon/sfctemp.rst
+F:	drivers/hwmon/sfctemp.c
+
 SFF/SFP/SFP+ MODULE SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
 L:	netdev@vger.kernel.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 87624902ea80..7da8fd8beb06 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1751,6 +1751,16 @@ config SENSORS_STTS751
 	  This driver can also be built as a module. If so, the module
 	  will be called stts751.
 
+config SENSORS_SFCTEMP
+	tristate "Starfive JH7100 temperature sensor"
+	depends on OF && (RISCV || COMPILE_TEST)
+	help
+	  If you say yes here you get support for temperature sensor
+	  on the Starfive JH7100 SoC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sfctemp.
+
 config SENSORS_SMM665
 	tristate "Summit Microelectronics SMM665"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 59e78bc212cf..3723eb580bf3 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_SBTSI)	+= sbtsi_temp.o
 obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
 obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
 obj-$(CONFIG_SENSORS_SCH5636)	+= sch5636.o
+obj-$(CONFIG_SENSORS_SFCTEMP)	+= sfctemp.o
 obj-$(CONFIG_SENSORS_SL28CPLD)	+= sl28cpld-hwmon.o
 obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
 obj-$(CONFIG_SENSORS_SHT21)	+= sht21.o
diff --git a/drivers/hwmon/sfctemp.c b/drivers/hwmon/sfctemp.c
new file mode 100644
index 000000000000..4328aacf9272
--- /dev/null
+++ b/drivers/hwmon/sfctemp.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ * Copyright (C) 2021 Samin Guo <samin.guo@starfivetech.com>
+ */
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/hwmon.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+/*
+ * TempSensor reset. The RSTN can be de-asserted once the analog core has
+ * powered up. Trst(min 100ns)
+ * 0:reset  1:de-assert
+ */
+#define SFCTEMP_RSTN	BIT(0)
+
+/*
+ * TempSensor analog core power down. The analog core will be powered up
+ * Tpu(min 50us) after PD is de-asserted. RSTN should be held low until the
+ * analog core is powered up.
+ * 0:power up  1:power down
+ */
+#define SFCTEMP_PD	BIT(1)
+
+/*
+ * TempSensor start conversion enable.
+ * 0:disable  1:enable
+ */
+#define SFCTEMP_RUN	BIT(2)
+
+/*
+ * TempSensor conversion value output.
+ * Temp(C)=DOUT*Y/4094 - K
+ */
+#define SFCTEMP_DOUT_POS	16
+#define SFCTEMP_DOUT_MSK	GENMASK(27, 16)
+
+/* DOUT to Celcius conversion constants */
+#define SFCTEMP_Y1000	237500L
+#define SFCTEMP_Z	4094L
+#define SFCTEMP_K1000	81100L
+
+struct sfctemp {
+	/* serialize access to hardware register and enabled below */
+	struct mutex lock;
+	struct completion conversion_done;
+	void __iomem *regs;
+	bool enabled;
+};
+
+static irqreturn_t sfctemp_isr(int irq, void *data)
+{
+	struct sfctemp *sfctemp = data;
+
+	complete(&sfctemp->conversion_done);
+	return IRQ_HANDLED;
+}
+
+static void sfctemp_power_up(struct sfctemp *sfctemp)
+{
+	/* make sure we're powered down first */
+	writel(SFCTEMP_PD, sfctemp->regs);
+	udelay(1);
+
+	writel(0, sfctemp->regs);
+	/* wait t_pu(50us) + t_rst(100ns) */
+	usleep_range(60, 200);
+
+	/* de-assert reset */
+	writel(SFCTEMP_RSTN, sfctemp->regs);
+	udelay(1); /* wait t_su(500ps) */
+}
+
+static void sfctemp_power_down(struct sfctemp *sfctemp)
+{
+	writel(SFCTEMP_PD, sfctemp->regs);
+}
+
+static void sfctemp_run_single(struct sfctemp *sfctemp)
+{
+	writel(SFCTEMP_RSTN | SFCTEMP_RUN, sfctemp->regs);
+	udelay(1);
+	writel(SFCTEMP_RSTN, sfctemp->regs);
+}
+
+static int sfctemp_enable(struct sfctemp *sfctemp)
+{
+	mutex_lock(&sfctemp->lock);
+	if (sfctemp->enabled)
+		goto done;
+
+	sfctemp_power_up(sfctemp);
+	sfctemp->enabled = true;
+done:
+	mutex_unlock(&sfctemp->lock);
+	return 0;
+}
+
+static int sfctemp_disable(struct sfctemp *sfctemp)
+{
+	mutex_lock(&sfctemp->lock);
+	if (!sfctemp->enabled)
+		goto done;
+
+	sfctemp_power_down(sfctemp);
+	sfctemp->enabled = false;
+done:
+	mutex_unlock(&sfctemp->lock);
+	return 0;
+}
+
+static void sfctemp_disable_action(void *data)
+{
+	sfctemp_disable(data);
+}
+
+static int sfctemp_convert(struct sfctemp *sfctemp, long *val)
+{
+	int ret;
+
+	mutex_lock(&sfctemp->lock);
+	if (!sfctemp->enabled) {
+		ret = -ENODATA;
+		goto out;
+	}
+
+	sfctemp_run_single(sfctemp);
+
+	ret = wait_for_completion_interruptible_timeout(&sfctemp->conversion_done,
+							msecs_to_jiffies(10));
+	if (ret < 0)
+		goto out;
+
+	/* calculate temperature in milli Celcius */
+	*val = (long)((readl(sfctemp->regs) & SFCTEMP_DOUT_MSK) >> SFCTEMP_DOUT_POS)
+		* SFCTEMP_Y1000 / SFCTEMP_Z - SFCTEMP_K1000;
+
+	ret = 0;
+out:
+	mutex_unlock(&sfctemp->lock);
+	return ret;
+}
+
+static umode_t sfctemp_is_visible(const void *data, enum hwmon_sensor_types type,
+				  u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_enable:
+			return 0644;
+		case hwmon_temp_input:
+			return 0444;
+		}
+		return 0;
+	default:
+		return 0;
+	}
+}
+
+static int sfctemp_read(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
+{
+	struct sfctemp *sfctemp = dev_get_drvdata(dev);
+
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_enable:
+			*val = sfctemp->enabled;
+			return 0;
+		case hwmon_temp_input:
+			return sfctemp_convert(sfctemp, val);
+		}
+		return -EINVAL;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sfctemp_write(struct device *dev, enum hwmon_sensor_types type,
+			 u32 attr, int channel, long val)
+{
+	struct sfctemp *sfctemp = dev_get_drvdata(dev);
+
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_enable:
+			if (val == 0)
+				return sfctemp_disable(sfctemp);
+			if (val == 1)
+				return sfctemp_enable(sfctemp);
+			break;
+		}
+		return -EINVAL;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct hwmon_channel_info *sfctemp_info[] = {
+	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
+	HWMON_CHANNEL_INFO(temp, HWMON_T_ENABLE | HWMON_T_INPUT),
+	NULL
+};
+
+static const struct hwmon_ops sfctemp_hwmon_ops = {
+	.is_visible = sfctemp_is_visible,
+	.read = sfctemp_read,
+	.write = sfctemp_write,
+};
+
+static const struct hwmon_chip_info sfctemp_chip_info = {
+	.ops = &sfctemp_hwmon_ops,
+	.info = sfctemp_info,
+};
+
+static int sfctemp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device *hwmon_dev;
+	struct resource *mem;
+	struct sfctemp *sfctemp;
+	int ret;
+
+	sfctemp = devm_kzalloc(dev, sizeof(*sfctemp), GFP_KERNEL);
+	if (!sfctemp)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, sfctemp);
+	mutex_init(&sfctemp->lock);
+	init_completion(&sfctemp->conversion_done);
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	sfctemp->regs = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(sfctemp->regs))
+		return PTR_ERR(sfctemp->regs);
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_request_irq(dev, ret, sfctemp_isr,
+			       IRQF_SHARED, pdev->name, sfctemp);
+	if (ret) {
+		dev_err(dev, "request irq failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action(dev, sfctemp_disable_action, sfctemp);
+	if (ret)
+		return ret;
+
+	ret = sfctemp_enable(sfctemp);
+	if (ret)
+		return ret;
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, pdev->name, sfctemp,
+							 &sfctemp_chip_info, NULL);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct of_device_id sfctemp_of_match[] = {
+	{ .compatible = "starfive,jh7100-temp" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, sfctemp_of_match);
+
+static struct platform_driver sfctemp_driver = {
+	.driver = {
+		.name = "sfctemp",
+		.of_match_table = of_match_ptr(sfctemp_of_match),
+	},
+	.probe  = sfctemp_probe,
+};
+module_platform_driver(sfctemp_driver);
+
+MODULE_AUTHOR("Emil Renner Berthing");
+MODULE_DESCRIPTION("StarFive JH7100 temperature sensor driver");
+MODULE_LICENSE("GPL");
-- 
2.32.0

Re: [PATCH v2 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor

[Guenter Roeck]

On Thu, Jun 24, 2021 at 06:21:08PM +0200, Emil Renner Berthing wrote:
> From: Emil Renner Berthing <kernel@esmil.dk>
> 
> Register definitions and conversion constants based on sfctemp driver by
> Samin in the StarFive 5.10 kernel.
> 
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
> ---
>  Documentation/hwmon/index.rst   |   1 +
>  Documentation/hwmon/sfctemp.rst |  32 ++++
>  MAINTAINERS                     |   8 +
>  drivers/hwmon/Kconfig           |  10 ++
>  drivers/hwmon/Makefile          |   1 +
>  drivers/hwmon/sfctemp.c         | 288 ++++++++++++++++++++++++++++++++
>  6 files changed, 340 insertions(+)
>  create mode 100644 Documentation/hwmon/sfctemp.rst
>  create mode 100644 drivers/hwmon/sfctemp.c
> 
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 9ed60fa84cbe..f23308e97d2e 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -161,6 +161,7 @@ Hardware Monitoring Kernel Drivers
>     sch5627
>     sch5636
>     scpi-hwmon
> +   sfctemp
>     sht15
>     sht21
>     sht3x
> diff --git a/Documentation/hwmon/sfctemp.rst b/Documentation/hwmon/sfctemp.rst
> new file mode 100644
> index 000000000000..465edce2fea5
> --- /dev/null
> +++ b/Documentation/hwmon/sfctemp.rst
> @@ -0,0 +1,32 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver sfctemp
> +=====================
> +
> +Supported chips:
> + - StarFive JH7100
> +
> +Authors:
> + - Emil Renner Berthing <kernel@esmil.dk>
> +
> +Description
> +-----------
> +
> +This driver adds support for reading the built-in temperature sensor on the
> +JH7100 RISC-V SoC by StarFive Technology Co. Ltd.
> +
> +``sysfs`` interface
> +-------------------
> +
> +The temperature sensor can be enabled, disabled and queried via the standard
> +hwmon interface in sysfs under ``/sys/class/hwmon/hwmonX`` for some value of
> +``X``:
> +
> +================ ==== =============================================
> +Name             Perm Description
> +================ ==== =============================================
> +temp1_enable     RW   Enable or disable temperature sensor.
> +                      Automatically enabled by the driver,
> +                      but may be disabled to save power.
> +temp1_input      RO   Temperature reading in milli-degrees Celsius.
> +================ ==== =============================================
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8c5ee008301a..a7d25a672270 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16535,6 +16535,14 @@ L:	netdev@vger.kernel.org
>  S:	Supported
>  F:	drivers/net/ethernet/sfc/
>  
> +SFCTEMP HWMON DRIVER
> +M:	Emil Renner Berthing <kernel@esmil.dk>
> +L:	linux-hwmon@vger.kernel.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml
> +F:	Documentation/hwmon/sfctemp.rst
> +F:	drivers/hwmon/sfctemp.c
> +
>  SFF/SFP/SFP+ MODULE SUPPORT
>  M:	Russell King <linux@armlinux.org.uk>
>  L:	netdev@vger.kernel.org
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 87624902ea80..7da8fd8beb06 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1751,6 +1751,16 @@ config SENSORS_STTS751
>  	  This driver can also be built as a module. If so, the module
>  	  will be called stts751.
>  
> +config SENSORS_SFCTEMP
> +	tristate "Starfive JH7100 temperature sensor"
> +	depends on OF && (RISCV || COMPILE_TEST)
> +	help
> +	  If you say yes here you get support for temperature sensor
> +	  on the Starfive JH7100 SoC.
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called sfctemp.
> +
>  config SENSORS_SMM665
>  	tristate "Summit Microelectronics SMM665"
>  	depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 59e78bc212cf..3723eb580bf3 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_SBTSI)	+= sbtsi_temp.o
>  obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
>  obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
>  obj-$(CONFIG_SENSORS_SCH5636)	+= sch5636.o
> +obj-$(CONFIG_SENSORS_SFCTEMP)	+= sfctemp.o
>  obj-$(CONFIG_SENSORS_SL28CPLD)	+= sl28cpld-hwmon.o
>  obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
>  obj-$(CONFIG_SENSORS_SHT21)	+= sht21.o
> diff --git a/drivers/hwmon/sfctemp.c b/drivers/hwmon/sfctemp.c
> new file mode 100644
> index 000000000000..4328aacf9272
> --- /dev/null
> +++ b/drivers/hwmon/sfctemp.c
> @@ -0,0 +1,288 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
> + * Copyright (C) 2021 Samin Guo <samin.guo@starfivetech.com>
> + */
> +#include <linux/completion.h>
> +#include <linux/delay.h>
> +#include <linux/hwmon.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +/*
> + * TempSensor reset. The RSTN can be de-asserted once the analog core has
> + * powered up. Trst(min 100ns)
> + * 0:reset  1:de-assert
> + */
> +#define SFCTEMP_RSTN	BIT(0)
> +
> +/*
> + * TempSensor analog core power down. The analog core will be powered up
> + * Tpu(min 50us) after PD is de-asserted. RSTN should be held low until the
> + * analog core is powered up.
> + * 0:power up  1:power down
> + */
> +#define SFCTEMP_PD	BIT(1)
> +
> +/*
> + * TempSensor start conversion enable.
> + * 0:disable  1:enable
> + */
> +#define SFCTEMP_RUN	BIT(2)
> +
> +/*
> + * TempSensor conversion value output.
> + * Temp(C)=DOUT*Y/4094 - K
> + */
> +#define SFCTEMP_DOUT_POS	16
> +#define SFCTEMP_DOUT_MSK	GENMASK(27, 16)
> +
> +/* DOUT to Celcius conversion constants */
> +#define SFCTEMP_Y1000	237500L
> +#define SFCTEMP_Z	4094L
> +#define SFCTEMP_K1000	81100L
> +
> +struct sfctemp {
> +	/* serialize access to hardware register and enabled below */
> +	struct mutex lock;
> +	struct completion conversion_done;
> +	void __iomem *regs;
> +	bool enabled;
> +};
> +
> +static irqreturn_t sfctemp_isr(int irq, void *data)
> +{
> +	struct sfctemp *sfctemp = data;
> +
> +	complete(&sfctemp->conversion_done);
> +	return IRQ_HANDLED;
> +}
> +
> +static void sfctemp_power_up(struct sfctemp *sfctemp)
> +{
> +	/* make sure we're powered down first */
> +	writel(SFCTEMP_PD, sfctemp->regs);
> +	udelay(1);
> +
> +	writel(0, sfctemp->regs);
> +	/* wait t_pu(50us) + t_rst(100ns) */
> +	usleep_range(60, 200);
> +
> +	/* de-assert reset */
> +	writel(SFCTEMP_RSTN, sfctemp->regs);
> +	udelay(1); /* wait t_su(500ps) */
> +}
> +
> +static void sfctemp_power_down(struct sfctemp *sfctemp)
> +{
> +	writel(SFCTEMP_PD, sfctemp->regs);
> +}
> +
> +static void sfctemp_run_single(struct sfctemp *sfctemp)
> +{
> +	writel(SFCTEMP_RSTN | SFCTEMP_RUN, sfctemp->regs);
> +	udelay(1);
> +	writel(SFCTEMP_RSTN, sfctemp->regs);
> +}
> +
> +static int sfctemp_enable(struct sfctemp *sfctemp)
> +{
> +	mutex_lock(&sfctemp->lock);
> +	if (sfctemp->enabled)
> +		goto done;
> +
> +	sfctemp_power_up(sfctemp);
> +	sfctemp->enabled = true;
> +done:
> +	mutex_unlock(&sfctemp->lock);
> +	return 0;
> +}
> +
> +static int sfctemp_disable(struct sfctemp *sfctemp)
> +{
> +	mutex_lock(&sfctemp->lock);
> +	if (!sfctemp->enabled)
> +		goto done;
> +
> +	sfctemp_power_down(sfctemp);
> +	sfctemp->enabled = false;
> +done:
> +	mutex_unlock(&sfctemp->lock);
> +	return 0;
> +}
> +
> +static void sfctemp_disable_action(void *data)
> +{
> +	sfctemp_disable(data);
> +}
> +
> +static int sfctemp_convert(struct sfctemp *sfctemp, long *val)
> +{
> +	int ret;
> +
> +	mutex_lock(&sfctemp->lock);
> +	if (!sfctemp->enabled) {
> +		ret = -ENODATA;
> +		goto out;
> +	}
> +
> +	sfctemp_run_single(sfctemp);
> +
> +	ret = wait_for_completion_interruptible_timeout(&sfctemp->conversion_done,
> +							msecs_to_jiffies(10));
> +	if (ret < 0)
> +		goto out;

Does this need to handle timeouts ?

	if (ret == 0)
		return -ETIMEDOUT;
> +
> +	/* calculate temperature in milli Celcius */
> +	*val = (long)((readl(sfctemp->regs) & SFCTEMP_DOUT_MSK) >> SFCTEMP_DOUT_POS)
> +		* SFCTEMP_Y1000 / SFCTEMP_Z - SFCTEMP_K1000;
> +
> +	ret = 0;
> +out:
> +	mutex_unlock(&sfctemp->lock);
> +	return ret;
> +}
> +
> +static umode_t sfctemp_is_visible(const void *data, enum hwmon_sensor_types type,
> +				  u32 attr, int channel)
> +{
> +	switch (type) {
> +	case hwmon_temp:
> +		switch (attr) {
> +		case hwmon_temp_enable:
> +			return 0644;
> +		case hwmon_temp_input:
> +			return 0444;
> +		}
> +		return 0;
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static int sfctemp_read(struct device *dev, enum hwmon_sensor_types type,
> +			u32 attr, int channel, long *val)
> +{
> +	struct sfctemp *sfctemp = dev_get_drvdata(dev);
> +
> +	switch (type) {
> +	case hwmon_temp:
> +		switch (attr) {
> +		case hwmon_temp_enable:
> +			*val = sfctemp->enabled;
> +			return 0;
> +		case hwmon_temp_input:
> +			return sfctemp_convert(sfctemp, val);
> +		}
> +		return -EINVAL;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int sfctemp_write(struct device *dev, enum hwmon_sensor_types type,
> +			 u32 attr, int channel, long val)
> +{
> +	struct sfctemp *sfctemp = dev_get_drvdata(dev);
> +
> +	switch (type) {
> +	case hwmon_temp:
> +		switch (attr) {
> +		case hwmon_temp_enable:
> +			if (val == 0)
> +				return sfctemp_disable(sfctemp);
> +			if (val == 1)
> +				return sfctemp_enable(sfctemp);
> +			break;
> +		}
> +		return -EINVAL;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static const struct hwmon_channel_info *sfctemp_info[] = {
> +	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
> +	HWMON_CHANNEL_INFO(temp, HWMON_T_ENABLE | HWMON_T_INPUT),
> +	NULL
> +};
> +
> +static const struct hwmon_ops sfctemp_hwmon_ops = {
> +	.is_visible = sfctemp_is_visible,
> +	.read = sfctemp_read,
> +	.write = sfctemp_write,
> +};
> +
> +static const struct hwmon_chip_info sfctemp_chip_info = {
> +	.ops = &sfctemp_hwmon_ops,
> +	.info = sfctemp_info,
> +};
> +
> +static int sfctemp_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device *hwmon_dev;
> +	struct resource *mem;
> +	struct sfctemp *sfctemp;
> +	int ret;
> +
> +	sfctemp = devm_kzalloc(dev, sizeof(*sfctemp), GFP_KERNEL);
> +	if (!sfctemp)
> +		return -ENOMEM;
> +
> +	dev_set_drvdata(dev, sfctemp);
> +	mutex_init(&sfctemp->lock);
> +	init_completion(&sfctemp->conversion_done);
> +
> +	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	sfctemp->regs = devm_ioremap_resource(dev, mem);
> +	if (IS_ERR(sfctemp->regs))
> +		return PTR_ERR(sfctemp->regs);
> +
> +	ret = platform_get_irq(pdev, 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = devm_request_irq(dev, ret, sfctemp_isr,
> +			       IRQF_SHARED, pdev->name, sfctemp);
> +	if (ret) {
> +		dev_err(dev, "request irq failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = devm_add_action(dev, sfctemp_disable_action, sfctemp);
> +	if (ret)
> +		return ret;
> +
> +	ret = sfctemp_enable(sfctemp);
> +	if (ret)
> +		return ret;
> +
> +	hwmon_dev = devm_hwmon_device_register_with_info(dev, pdev->name, sfctemp,
> +							 &sfctemp_chip_info, NULL);
> +	return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +static const struct of_device_id sfctemp_of_match[] = {
> +	{ .compatible = "starfive,jh7100-temp" },
> +	{ /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(of, sfctemp_of_match);
> +
> +static struct platform_driver sfctemp_driver = {
> +	.driver = {
> +		.name = "sfctemp",
> +		.of_match_table = of_match_ptr(sfctemp_of_match),
> +	},
> +	.probe  = sfctemp_probe,
> +};
> +module_platform_driver(sfctemp_driver);
> +
> +MODULE_AUTHOR("Emil Renner Berthing");
> +MODULE_DESCRIPTION("StarFive JH7100 temperature sensor driver");
> +MODULE_LICENSE("GPL");
> -- 
> 2.32.0
> 

Re: [PATCH v2 2/2] hwmon: (sfctemp) Add StarFive JH7100 temperature sensor

[Esmil]

On Mon, 28 Jun 2021 at 17:08, Guenter Roeck <linux@roeck-us.net> wrote:
> On Thu, Jun 24, 2021 at 06:21:08PM +0200, Emil Renner Berthing wrote:
> > From: Emil Renner Berthing <kernel@esmil.dk>
> >
> > Register definitions and conversion constants based on sfctemp driver by
> > Samin in the StarFive 5.10 kernel.
> >
> > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> > Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
> > ---
> >  Documentation/hwmon/index.rst   |   1 +
> >  Documentation/hwmon/sfctemp.rst |  32 ++++
> >  MAINTAINERS                     |   8 +
> >  drivers/hwmon/Kconfig           |  10 ++
> >  drivers/hwmon/Makefile          |   1 +
> >  drivers/hwmon/sfctemp.c         | 288 ++++++++++++++++++++++++++++++++
> >  6 files changed, 340 insertions(+)
> >  create mode 100644 Documentation/hwmon/sfctemp.rst
> >  create mode 100644 drivers/hwmon/sfctemp.c
> >
> > diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> > index 9ed60fa84cbe..f23308e97d2e 100644
> > --- a/Documentation/hwmon/index.rst
> > +++ b/Documentation/hwmon/index.rst
> > @@ -161,6 +161,7 @@ Hardware Monitoring Kernel Drivers
> >     sch5627
> >     sch5636
> >     scpi-hwmon
> > +   sfctemp
> >     sht15
> >     sht21
> >     sht3x
> > diff --git a/Documentation/hwmon/sfctemp.rst b/Documentation/hwmon/sfctemp.rst
> > new file mode 100644
> > index 000000000000..465edce2fea5
> > --- /dev/null
> > +++ b/Documentation/hwmon/sfctemp.rst
> > @@ -0,0 +1,32 @@
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +Kernel driver sfctemp
> > +=====================
> > +
> > +Supported chips:
> > + - StarFive JH7100
> > +
> > +Authors:
> > + - Emil Renner Berthing <kernel@esmil.dk>
> > +
> > +Description
> > +-----------
> > +
> > +This driver adds support for reading the built-in temperature sensor on the
> > +JH7100 RISC-V SoC by StarFive Technology Co. Ltd.
> > +
> > +``sysfs`` interface
> > +-------------------
> > +
> > +The temperature sensor can be enabled, disabled and queried via the standard
> > +hwmon interface in sysfs under ``/sys/class/hwmon/hwmonX`` for some value of
> > +``X``:
> > +
> > +================ ==== =============================================
> > +Name             Perm Description
> > +================ ==== =============================================
> > +temp1_enable     RW   Enable or disable temperature sensor.
> > +                      Automatically enabled by the driver,
> > +                      but may be disabled to save power.
> > +temp1_input      RO   Temperature reading in milli-degrees Celsius.
> > +================ ==== =============================================
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 8c5ee008301a..a7d25a672270 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -16535,6 +16535,14 @@ L:   netdev@vger.kernel.org
> >  S:   Supported
> >  F:   drivers/net/ethernet/sfc/
> >
> > +SFCTEMP HWMON DRIVER
> > +M:   Emil Renner Berthing <kernel@esmil.dk>
> > +L:   linux-hwmon@vger.kernel.org
> > +S:   Maintained
> > +F:   Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml
> > +F:   Documentation/hwmon/sfctemp.rst
> > +F:   drivers/hwmon/sfctemp.c
> > +
> >  SFF/SFP/SFP+ MODULE SUPPORT
> >  M:   Russell King <linux@armlinux.org.uk>
> >  L:   netdev@vger.kernel.org
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index 87624902ea80..7da8fd8beb06 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -1751,6 +1751,16 @@ config SENSORS_STTS751
> >         This driver can also be built as a module. If so, the module
> >         will be called stts751.
> >
> > +config SENSORS_SFCTEMP
> > +     tristate "Starfive JH7100 temperature sensor"
> > +     depends on OF && (RISCV || COMPILE_TEST)
> > +     help
> > +       If you say yes here you get support for temperature sensor
> > +       on the Starfive JH7100 SoC.
> > +
> > +       This driver can also be built as a module.  If so, the module
> > +       will be called sfctemp.
> > +
> >  config SENSORS_SMM665
> >       tristate "Summit Microelectronics SMM665"
> >       depends on I2C
> > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> > index 59e78bc212cf..3723eb580bf3 100644
> > --- a/drivers/hwmon/Makefile
> > +++ b/drivers/hwmon/Makefile
> > @@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_SBTSI)       += sbtsi_temp.o
> >  obj-$(CONFIG_SENSORS_SCH56XX_COMMON)+= sch56xx-common.o
> >  obj-$(CONFIG_SENSORS_SCH5627)        += sch5627.o
> >  obj-$(CONFIG_SENSORS_SCH5636)        += sch5636.o
> > +obj-$(CONFIG_SENSORS_SFCTEMP)        += sfctemp.o
> >  obj-$(CONFIG_SENSORS_SL28CPLD)       += sl28cpld-hwmon.o
> >  obj-$(CONFIG_SENSORS_SHT15)  += sht15.o
> >  obj-$(CONFIG_SENSORS_SHT21)  += sht21.o
> > diff --git a/drivers/hwmon/sfctemp.c b/drivers/hwmon/sfctemp.c
> > new file mode 100644
> > index 000000000000..4328aacf9272
> > --- /dev/null
> > +++ b/drivers/hwmon/sfctemp.c
> > @@ -0,0 +1,288 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
> > + * Copyright (C) 2021 Samin Guo <samin.guo@starfivetech.com>
> > + */
> > +#include <linux/completion.h>
> > +#include <linux/delay.h>
> > +#include <linux/hwmon.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +
> > +/*
> > + * TempSensor reset. The RSTN can be de-asserted once the analog core has
> > + * powered up. Trst(min 100ns)
> > + * 0:reset  1:de-assert
> > + */
> > +#define SFCTEMP_RSTN BIT(0)
> > +
> > +/*
> > + * TempSensor analog core power down. The analog core will be powered up
> > + * Tpu(min 50us) after PD is de-asserted. RSTN should be held low until the
> > + * analog core is powered up.
> > + * 0:power up  1:power down
> > + */
> > +#define SFCTEMP_PD   BIT(1)
> > +
> > +/*
> > + * TempSensor start conversion enable.
> > + * 0:disable  1:enable
> > + */
> > +#define SFCTEMP_RUN  BIT(2)
> > +
> > +/*
> > + * TempSensor conversion value output.
> > + * Temp(C)=DOUT*Y/4094 - K
> > + */
> > +#define SFCTEMP_DOUT_POS     16
> > +#define SFCTEMP_DOUT_MSK     GENMASK(27, 16)
> > +
> > +/* DOUT to Celcius conversion constants */
> > +#define SFCTEMP_Y1000        237500L
> > +#define SFCTEMP_Z    4094L
> > +#define SFCTEMP_K1000        81100L
> > +
> > +struct sfctemp {
> > +     /* serialize access to hardware register and enabled below */
> > +     struct mutex lock;
> > +     struct completion conversion_done;
> > +     void __iomem *regs;
> > +     bool enabled;
> > +};
> > +
> > +static irqreturn_t sfctemp_isr(int irq, void *data)
> > +{
> > +     struct sfctemp *sfctemp = data;
> > +
> > +     complete(&sfctemp->conversion_done);
> > +     return IRQ_HANDLED;
> > +}
> > +
> > +static void sfctemp_power_up(struct sfctemp *sfctemp)
> > +{
> > +     /* make sure we're powered down first */
> > +     writel(SFCTEMP_PD, sfctemp->regs);
> > +     udelay(1);
> > +
> > +     writel(0, sfctemp->regs);
> > +     /* wait t_pu(50us) + t_rst(100ns) */
> > +     usleep_range(60, 200);
> > +
> > +     /* de-assert reset */
> > +     writel(SFCTEMP_RSTN, sfctemp->regs);
> > +     udelay(1); /* wait t_su(500ps) */
> > +}
> > +
> > +static void sfctemp_power_down(struct sfctemp *sfctemp)
> > +{
> > +     writel(SFCTEMP_PD, sfctemp->regs);
> > +}
> > +
> > +static void sfctemp_run_single(struct sfctemp *sfctemp)
> > +{
> > +     writel(SFCTEMP_RSTN | SFCTEMP_RUN, sfctemp->regs);
> > +     udelay(1);
> > +     writel(SFCTEMP_RSTN, sfctemp->regs);
> > +}
> > +
> > +static int sfctemp_enable(struct sfctemp *sfctemp)
> > +{
> > +     mutex_lock(&sfctemp->lock);
> > +     if (sfctemp->enabled)
> > +             goto done;
> > +
> > +     sfctemp_power_up(sfctemp);
> > +     sfctemp->enabled = true;
> > +done:
> > +     mutex_unlock(&sfctemp->lock);
> > +     return 0;
> > +}
> > +
> > +static int sfctemp_disable(struct sfctemp *sfctemp)
> > +{
> > +     mutex_lock(&sfctemp->lock);
> > +     if (!sfctemp->enabled)
> > +             goto done;
> > +
> > +     sfctemp_power_down(sfctemp);
> > +     sfctemp->enabled = false;
> > +done:
> > +     mutex_unlock(&sfctemp->lock);
> > +     return 0;
> > +}
> > +
> > +static void sfctemp_disable_action(void *data)
> > +{
> > +     sfctemp_disable(data);
> > +}
> > +
> > +static int sfctemp_convert(struct sfctemp *sfctemp, long *val)
> > +{
> > +     int ret;
> > +
> > +     mutex_lock(&sfctemp->lock);
> > +     if (!sfctemp->enabled) {
> > +             ret = -ENODATA;
> > +             goto out;
> > +     }
> > +
> > +     sfctemp_run_single(sfctemp);
> > +
> > +     ret = wait_for_completion_interruptible_timeout(&sfctemp->conversion_done,
> > +                                                     msecs_to_jiffies(10));
> > +     if (ret < 0)
> > +             goto out;
>
> Does this need to handle timeouts ?
>
>         if (ret == 0)
>                 return -ETIMEDOUT;

Oh yes. Good catch. I thought it would automatically return -ETIMEDOUT
on timeout. I'll add that to the next version.

> > +     ret = 0;
> > +out:
> > +     mutex_unlock(&sfctemp->lock);
> > +     return ret;
> > +}
> > +
> > +static umode_t sfctemp_is_visible(const void *data, enum hwmon_sensor_types type,
> > +                               u32 attr, int channel)
> > +{
> > +     switch (type) {
> > +     case hwmon_temp:
> > +             switch (attr) {
> > +             case hwmon_temp_enable:
> > +                     return 0644;
> > +             case hwmon_temp_input:
> > +                     return 0444;
> > +             }
> > +             return 0;
> > +     default:
> > +             return 0;
> > +     }
> > +}
> > +
> > +static int sfctemp_read(struct device *dev, enum hwmon_sensor_types type,
> > +                     u32 attr, int channel, long *val)
> > +{
> > +     struct sfctemp *sfctemp = dev_get_drvdata(dev);
> > +
> > +     switch (type) {
> > +     case hwmon_temp:
> > +             switch (attr) {
> > +             case hwmon_temp_enable:
> > +                     *val = sfctemp->enabled;
> > +                     return 0;
> > +             case hwmon_temp_input:
> > +                     return sfctemp_convert(sfctemp, val);
> > +             }
> > +             return -EINVAL;
> > +     default:
> > +             return -EINVAL;
> > +     }
> > +}
> > +
> > +static int sfctemp_write(struct device *dev, enum hwmon_sensor_types type,
> > +                      u32 attr, int channel, long val)
> > +{
> > +     struct sfctemp *sfctemp = dev_get_drvdata(dev);
> > +
> > +     switch (type) {
> > +     case hwmon_temp:
> > +             switch (attr) {
> > +             case hwmon_temp_enable:
> > +                     if (val == 0)
> > +                             return sfctemp_disable(sfctemp);
> > +                     if (val == 1)
> > +                             return sfctemp_enable(sfctemp);
> > +                     break;
> > +             }
> > +             return -EINVAL;
> > +     default:
> > +             return -EINVAL;
> > +     }
> > +}
> > +
> > +static const struct hwmon_channel_info *sfctemp_info[] = {
> > +     HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
> > +     HWMON_CHANNEL_INFO(temp, HWMON_T_ENABLE | HWMON_T_INPUT),
> > +     NULL
> > +};
> > +
> > +static const struct hwmon_ops sfctemp_hwmon_ops = {
> > +     .is_visible = sfctemp_is_visible,
> > +     .read = sfctemp_read,
> > +     .write = sfctemp_write,
> > +};
> > +
> > +static const struct hwmon_chip_info sfctemp_chip_info = {
> > +     .ops = &sfctemp_hwmon_ops,
> > +     .info = sfctemp_info,
> > +};
> > +
> > +static int sfctemp_probe(struct platform_device *pdev)
> > +{
> > +     struct device *dev = &pdev->dev;
> > +     struct device *hwmon_dev;
> > +     struct resource *mem;
> > +     struct sfctemp *sfctemp;
> > +     int ret;
> > +
> > +     sfctemp = devm_kzalloc(dev, sizeof(*sfctemp), GFP_KERNEL);
> > +     if (!sfctemp)
> > +             return -ENOMEM;
> > +
> > +     dev_set_drvdata(dev, sfctemp);
> > +     mutex_init(&sfctemp->lock);
> > +     init_completion(&sfctemp->conversion_done);
> > +
> > +     mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +     sfctemp->regs = devm_ioremap_resource(dev, mem);
> > +     if (IS_ERR(sfctemp->regs))
> > +             return PTR_ERR(sfctemp->regs);
> > +
> > +     ret = platform_get_irq(pdev, 0);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     ret = devm_request_irq(dev, ret, sfctemp_isr,
> > +                            IRQF_SHARED, pdev->name, sfctemp);
> > +     if (ret) {
> > +             dev_err(dev, "request irq failed: %d\n", ret);
> > +             return ret;
> > +     }
> > +
> > +     ret = devm_add_action(dev, sfctemp_disable_action, sfctemp);
> > +     if (ret)
> > +             return ret;
> > +
> > +     ret = sfctemp_enable(sfctemp);
> > +     if (ret)
> > +             return ret;
> > +
> > +     hwmon_dev = devm_hwmon_device_register_with_info(dev, pdev->name, sfctemp,
> > +                                                      &sfctemp_chip_info, NULL);
> > +     return PTR_ERR_OR_ZERO(hwmon_dev);
> > +}
> > +
> > +static const struct of_device_id sfctemp_of_match[] = {
> > +     { .compatible = "starfive,jh7100-temp" },
> > +     { /* sentinel */ }
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, sfctemp_of_match);
> > +
> > +static struct platform_driver sfctemp_driver = {
> > +     .driver = {
> > +             .name = "sfctemp",
> > +             .of_match_table = of_match_ptr(sfctemp_of_match),
> > +     },
> > +     .probe  = sfctemp_probe,
> > +};
> > +module_platform_driver(sfctemp_driver);
> > +
> > +MODULE_AUTHOR("Emil Renner Berthing");
> > +MODULE_DESCRIPTION("StarFive JH7100 temperature sensor driver");
> > +MODULE_LICENSE("GPL");
> > --
> > 2.32.0
> >

Re: [PATCH v2 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings

[Rob Herring]

On Thu, 24 Jun 2021 18:21:07 +0200, Emil Renner Berthing wrote:
> From: Emil Renner Berthing <kernel@esmil.dk>
> 
> Add bindings for the temperature sensor on the StarFive JH7100 SoC.
> 
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> ---
>  .../bindings/hwmon/starfive,jh7100-temp.yaml  | 43 +++++++++++++++++++
>  1 file changed, 43 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 1/2] dt-bindings: hwmon: add starfive,jh7100-temp bindings

[Esmil]

On Wed, 14 Jul 2021 at 21:32, Rob Herring <robh@kernel.org> wrote:
> On Thu, 24 Jun 2021 18:21:07 +0200, Emil Renner Berthing wrote:
> > From: Emil Renner Berthing <kernel@esmil.dk>
> >
> > Add bindings for the temperature sensor on the StarFive JH7100 SoC.
> >
> > Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> > ---
> >  .../bindings/hwmon/starfive,jh7100-temp.yaml  | 43 +++++++++++++++++++
> >  1 file changed, 43 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/hwmon/starfive,jh7100-temp.yaml
> >
>
> Reviewed-by: Rob Herring <robh@kernel.org>

Thank you!