* [PATCH v4 1/5] dt-bindings: arm: fsl: add Nitrogen8 SoM
@ 2021-06-14 17:06 Lucas Stach
2021-06-14 17:06 ` [PATCH v4 2/5] arm64: dts: imx8mq: " Lucas Stach
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: Lucas Stach @ 2021-06-14 17:06 UTC (permalink / raw)
To: Shawn Guo
Cc: Fabio Estevam, Rob Herring, NXP Linux Team, Lukas F . Hartmann,
devicetree, linux-arm-kernel, kernel
Add compatible for the BoundaryDevices Nitrogen8 system on module.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 297c87f45db8..15519cc2d2c0 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -730,6 +730,7 @@ properties:
items:
- enum:
- boundary,imx8mq-nitrogen8m # i.MX8MQ NITROGEN Board
+ - boundary,imx8mq-nitrogen8m-som # i.MX8MQ NITROGEN SoM
- einfochips,imx8mq-thor96 # i.MX8MQ Thor96 Board
- fsl,imx8mq-evk # i.MX8MQ EVK Board
- google,imx8mq-phanbell # Google Coral Edge TPU
--
2.31.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v4 2/5] arm64: dts: imx8mq: add Nitrogen8 SoM
2021-06-14 17:06 [PATCH v4 1/5] dt-bindings: arm: fsl: add Nitrogen8 SoM Lucas Stach
@ 2021-06-14 17:06 ` Lucas Stach
2021-06-14 17:06 ` [PATCH v4 3/5] dt-bindings: vendor-prefixes: add mntre Lucas Stach
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Lucas Stach @ 2021-06-14 17:06 UTC (permalink / raw)
To: Shawn Guo
Cc: Fabio Estevam, Rob Herring, NXP Linux Team, Lukas F . Hartmann,
devicetree, linux-arm-kernel, kernel
This adds the description of the Nitrogen8 System on Module. The module
is quite simple with only a few (almost) fixed regulators and a eMMC
on-board.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Rob Herring <robh@kernel.org>
---
v2:
- remove 100/200MHz pinctrl states for usdhc1
- rename i2c nodes
v4:
- enable eMMC high-speed modes, now that we can selectively disable
HS400 mode
---
.../dts/freescale/imx8mq-nitrogen-som.dtsi | 275 ++++++++++++++++++
1 file changed, 275 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi
new file mode 100644
index 000000000000..36fc428ebe30
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Boundary Devices
+ * Copyright 2021 Lucas Stach <dev@lynxeye.de>
+ */
+
+#include "imx8mq.dtsi"
+
+/ {
+ model = "Boundary Devices i.MX8MQ Nitrogen8M";
+ compatible = "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ reg_1p8v: regulator-fixed-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_snvs: regulator-fixed-snvs {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_SNVS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&{/opp-table/opp-800000000} {
+ opp-microvolt = <1000000>;
+};
+
+&{/opp-table/opp-1000000000} {
+ opp-microvolt = <1000000>;
+};
+
+&A53_0 {
+ cpu-supply = <®_arm_dram>;
+};
+
+&A53_1 {
+ cpu-supply = <®_arm_dram>;
+};
+
+&A53_2 {
+ cpu-supply = <®_arm_dram>;
+};
+
+&A53_3 {
+ cpu-supply = <®_arm_dram>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9546";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_pca9546>;
+ reg = <0x70>;
+ reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c1a: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_arm_dram: regulator@60 {
+ compatible = "fcs,fan53555";
+ reg = <0x60>;
+ regulator-name = "VDD_ARM_DRAM_1V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+
+ i2c1b: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_dram_1p1v: regulator@60 {
+ compatible = "fcs,fan53555";
+ reg = <0x60>;
+ regulator-name = "NVCC_DRAM_1P1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+ };
+
+ i2c1c: i2c@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_soc_gpu_vpu: regulator@60 {
+ compatible = "fcs,fan53555";
+ reg = <0x60>;
+ regulator-name = "VDD_SOC_GPU_VPU";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ };
+ };
+
+ i2c1d: i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+&pgc_gpu {
+ power-supply = <®_soc_gpu_vpu>;
+};
+
+&pgc_vpu {
+ power-supply = <®_soc_gpu_vpu>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc1 {
+ assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vqmmc-supply = <®_1p8v>;
+ vmmc-supply = <®_snvs>;
+ bus-width = <8>;
+ non-removable;
+ no-mmc-hs400;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
+ MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
+ MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x59
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c1_pca9546: i2c1-pca9546grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x49
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45
+ MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x45
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
--
2.31.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v4 3/5] dt-bindings: vendor-prefixes: add mntre
2021-06-14 17:06 [PATCH v4 1/5] dt-bindings: arm: fsl: add Nitrogen8 SoM Lucas Stach
2021-06-14 17:06 ` [PATCH v4 2/5] arm64: dts: imx8mq: " Lucas Stach
@ 2021-06-14 17:06 ` Lucas Stach
2021-06-14 17:06 ` [PATCH v4 4/5] dt-bindings: arm: fsl: add MNT Reform2 board Lucas Stach
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Lucas Stach @ 2021-06-14 17:06 UTC (permalink / raw)
To: Shawn Guo
Cc: Fabio Estevam, Rob Herring, NXP Linux Team, Lukas F . Hartmann,
devicetree, linux-arm-kernel, kernel
MNT Research GmbH develops open source hardware, software
and textiles in Berlin, Germany.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index f6064d84a424..11f5fc5452cb 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -717,6 +717,8 @@ patternProperties:
description: MiraMEMS Sensing Technology Co., Ltd.
"^mitsubishi,.*":
description: Mitsubishi Electric Corporation
+ "^mntre,.*":
+ description: MNT Research GmbH
"^modtronix,.*":
description: Modtronix Engineering
"^mosaixtech,.*":
--
2.31.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v4 4/5] dt-bindings: arm: fsl: add MNT Reform2 board
2021-06-14 17:06 [PATCH v4 1/5] dt-bindings: arm: fsl: add Nitrogen8 SoM Lucas Stach
2021-06-14 17:06 ` [PATCH v4 2/5] arm64: dts: imx8mq: " Lucas Stach
2021-06-14 17:06 ` [PATCH v4 3/5] dt-bindings: vendor-prefixes: add mntre Lucas Stach
@ 2021-06-14 17:06 ` Lucas Stach
2021-06-14 17:06 ` [PATCH v4 5/5] arm64: dts: imx8mq: add support for MNT Reform2 Lucas Stach
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Lucas Stach @ 2021-06-14 17:06 UTC (permalink / raw)
To: Shawn Guo
Cc: Fabio Estevam, Rob Herring, NXP Linux Team, Lukas F . Hartmann,
devicetree, linux-arm-kernel, kernel
Add compatible for the MNT Reform2 laptop board.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 15519cc2d2c0..a16c55d29164 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -734,6 +734,7 @@ properties:
- einfochips,imx8mq-thor96 # i.MX8MQ Thor96 Board
- fsl,imx8mq-evk # i.MX8MQ EVK Board
- google,imx8mq-phanbell # Google Coral Edge TPU
+ - mntre,reform2 # MNT Reform2 Laptop
- purism,librem5-devkit # Purism Librem5 devkit
- solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
- technexion,pico-pi-imx8m # TechNexion PICO-PI-8M evk
--
2.31.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v4 5/5] arm64: dts: imx8mq: add support for MNT Reform2
2021-06-14 17:06 [PATCH v4 1/5] dt-bindings: arm: fsl: add Nitrogen8 SoM Lucas Stach
` (2 preceding siblings ...)
2021-06-14 17:06 ` [PATCH v4 4/5] dt-bindings: arm: fsl: add MNT Reform2 board Lucas Stach
@ 2021-06-14 17:06 ` Lucas Stach
2021-06-24 20:41 ` [PATCH v4 1/5] dt-bindings: arm: fsl: add Nitrogen8 SoM Rob Herring
2021-07-14 4:13 ` Shawn Guo
5 siblings, 0 replies; 7+ messages in thread
From: Lucas Stach @ 2021-06-14 17:06 UTC (permalink / raw)
To: Shawn Guo
Cc: Fabio Estevam, Rob Herring, NXP Linux Team, Lukas F . Hartmann,
devicetree, linux-arm-kernel, kernel
This adds a basic devicetree for the MNT Reform2 DIY laptop. Not all
of the board periperals are enabled yet, as some of them still require
kernel patches to work properly. The nodes for those peripherals will
be added as soon as the required patches are upstream.
The following has been tested to work:
- UART console
- SD card
- eMMC
- Gigabit Ethernet
- USB (internal Keyboard, Mouse, external ports)
- M.2 PCIe port
Co-developed-by: Lukas F. Hartmann <lukas@mntre.com>
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
v2: Fix checkpatch complaints.
v3:
- split out binding
- move status to end of usb node property list
- rename RTC node name to generic name
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/imx8mq-mnt-reform2.dts | 164 ++++++++++++++++++
2 files changed, 165 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 44890d56c194..e45c8f9c8912 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -54,6 +54,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r4.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-mnt-reform2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
new file mode 100644
index 000000000000..099b0472db5d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Copyright 2019-2021 MNT Research GmbH
+ * Copyright 2021 Lucas Stach <dev@lynxeye.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mq-nitrogen-som.dtsi"
+
+/ {
+ model = "MNT Reform 2";
+ compatible = "mntre,reform2", "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq";
+
+ pcie1_refclk: clock-pcie1-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ reg_main_5v: regulator-main-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_main_3v3: regulator-main-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_main_usb: regulator-main-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_PWR";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_main_5v>;
+ };
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ rtc@68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+};
+
+&pcie1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie1>;
+ reset-gpio = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+ <&clk IMX8MQ_CLK_PCIE2_AUX>,
+ <&clk IMX8MQ_CLK_PCIE2_PHY>,
+ <&pcie1_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ status = "okay";
+};
+
+®_1p8v {
+ vin-supply = <®_main_5v>;
+};
+
+®_snvs {
+ vin-supply = <®_main_5v>;
+};
+
+®_arm_dram {
+ vin-supply = <®_main_5v>;
+};
+
+®_dram_1p1v {
+ vin-supply = <®_main_5v>;
+};
+
+®_soc_gpu_vpu {
+ vin-supply = <®_main_5v>;
+};
+
+&snvs_rtc {
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usb3_phy0 {
+ vbus-supply = <®_main_usb>;
+ status = "okay";
+};
+
+&usb3_phy1 {
+ vbus-supply = <®_main_usb>;
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+ assigned-clock-rates = <200000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ vqmmc-supply = <®_main_3v3>;
+ vmmc-supply = <®_main_3v3>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
+ MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
+ >;
+ };
+
+ pinctrl_pcie1: pcie1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x16
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x45
+ MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x45
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
+ >;
+ };
+};
--
2.31.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v4 1/5] dt-bindings: arm: fsl: add Nitrogen8 SoM
2021-06-14 17:06 [PATCH v4 1/5] dt-bindings: arm: fsl: add Nitrogen8 SoM Lucas Stach
` (3 preceding siblings ...)
2021-06-14 17:06 ` [PATCH v4 5/5] arm64: dts: imx8mq: add support for MNT Reform2 Lucas Stach
@ 2021-06-24 20:41 ` Rob Herring
2021-07-14 4:13 ` Shawn Guo
5 siblings, 0 replies; 7+ messages in thread
From: Rob Herring @ 2021-06-24 20:41 UTC (permalink / raw)
To: Lucas Stach
Cc: Lukas F . Hartmann, kernel, NXP Linux Team, Fabio Estevam,
linux-arm-kernel, Shawn Guo, Rob Herring, devicetree
On Mon, 14 Jun 2021 19:06:29 +0200, Lucas Stach wrote:
> Add compatible for the BoundaryDevices Nitrogen8 system on module.
>
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> ---
> Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v4 1/5] dt-bindings: arm: fsl: add Nitrogen8 SoM
2021-06-14 17:06 [PATCH v4 1/5] dt-bindings: arm: fsl: add Nitrogen8 SoM Lucas Stach
` (4 preceding siblings ...)
2021-06-24 20:41 ` [PATCH v4 1/5] dt-bindings: arm: fsl: add Nitrogen8 SoM Rob Herring
@ 2021-07-14 4:13 ` Shawn Guo
5 siblings, 0 replies; 7+ messages in thread
From: Shawn Guo @ 2021-07-14 4:13 UTC (permalink / raw)
To: Lucas Stach
Cc: Fabio Estevam, Rob Herring, NXP Linux Team, Lukas F . Hartmann,
devicetree, linux-arm-kernel, kernel
On Mon, Jun 14, 2021 at 07:06:29PM +0200, Lucas Stach wrote:
> Add compatible for the BoundaryDevices Nitrogen8 system on module.
>
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
Applied all, thanks.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-07-14 4:13 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-14 17:06 [PATCH v4 1/5] dt-bindings: arm: fsl: add Nitrogen8 SoM Lucas Stach
2021-06-14 17:06 ` [PATCH v4 2/5] arm64: dts: imx8mq: " Lucas Stach
2021-06-14 17:06 ` [PATCH v4 3/5] dt-bindings: vendor-prefixes: add mntre Lucas Stach
2021-06-14 17:06 ` [PATCH v4 4/5] dt-bindings: arm: fsl: add MNT Reform2 board Lucas Stach
2021-06-14 17:06 ` [PATCH v4 5/5] arm64: dts: imx8mq: add support for MNT Reform2 Lucas Stach
2021-06-24 20:41 ` [PATCH v4 1/5] dt-bindings: arm: fsl: add Nitrogen8 SoM Rob Herring
2021-07-14 4:13 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).